Brick? Help please! - Galaxy S II Q&A, Help & Troubleshooting

Possibly i did the most stupid thing in my life.
I accidentaly started to odinflash a p1000 firmware on my s2 i recognized it at the do not turn off sign no process has been done nothing has been flashed i pulled off the cable. And the download mode was still on. I wanted to restart download mode so i used the 3 button combo. The screen went blank and didnt turned on again.
The reason i tried to flash this **** cause i work with phobes and i handle loads of firmware. What can i do? Its not my phone tbh .
Please any idea?
Sent from my GT-I9000 using xda premium

Get a usb jig and try that if you can't get into download mode normally.
Sent from my GT-I9100 using XDA

If you can't get into download mode the usual way, jig is maybe a 5% chance of working (I'm probably being generous). JTAG repair - cheaper option or Samsung service center/authorised repairer - probably more expensive option unless they don't notice it's been messed with thru some miracle.
Definitely try a jig tho & while you're waiting for the jig to arrive you might as well put it on charge overnight & leave it alone, then try getting into download mode the usual way again.

if your phone gets detected on system? if so try the following adb command va commandline
"adb reboot download".

Thanks i hope obe of the methods will work. I tought jig is 100% percent stuff you serious i have 5% chane that it will work?
Sent from my GT-I9000 using xda premium

Did you try hooking your phone up to your PC & trying some ADB commands as Bala suggested ?
If you get absolutely no signs of life from the phone at all, it's unlikely the jig will work. But you might as well try one.

when i plug the usb i hear no sound from my pc and i dont know if the phone is turned on or off cause its just blank screen.
in the device manager there is no new device.

i have efs backup
thats all

I think playing around with ADB is going to be a bit difficult to be honest (you'll need to find an ADB tutorial; search for one if you still want to try), so order & jig/wait for it to arrive.
If it doesn't work, either get it JTAG'd or send it in to Samsung.

fulii said:
Possibly i did the most stupid thing in my life.
I accidentaly started to odinflash a p1000 firmware on my s2 i recognized it at the do not turn off sign no process has been done nothing has been flashed i pulled off the cable. And the download mode was still on. I wanted to restart download mode so i used the 3 button combo. The screen went blank and didnt turned on again.
The reason i tried to flash this **** cause i work with phobes and i handle loads of firmware. What can i do? Its not my phone tbh .
Please any idea?
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
1.Remove battery reinsert battery and use combo key for download mode(try to download mode of P1000 or try to download mod of Galaxy S2. don't care black screen)
2.connect usb phone and pc
3.see odin if ID com connected(yellow) you can flash Galaxy S2 rom

no nothing helps
you know when u plug something to yout computouer
you her a little "ding" sound
i dont hear that
how is the usb jig is working anyway?
i think i messed up big this time.

if i plug it in to usb the comp dosnt recognizes it but the phone is getting hot aroundd the camera.
only after 10 minutes of plugged in time.

still no idea ?
the service guy will come to us at wednessday soi just ask him to restore bootloader with jig? or what?

Just wondered if you have tried to boot the phone into recovery mode
Pressing and holding the volume up + home + power
Guess you probably have but its not mentioned anywhere so just a thought becasue you can do a factory reset from there if the phone will boot into it.

nothing helps, tomorrow is the day , i hope we can send it back to samsung to repair it ... or the usb jig thats my last hope.
thanks for the answers.

else i have to pay for a 300 euro phone that i have never used ... /cry

Related

OMG! PLEASE HELP!! phone to pc screen!!

i commited the mistake of partitioning the sd card using rom manager.....so then i tried this http://forum.xda-developers.com/showthread.php?t=745547
flashed the EU version , then i strggled going into dowload mode again....i finally got into download mode using adb ...and when i was flashing it , it suddendly stopped and then the phone to pc symbol appeared
i dont know what else to do...i've been up all night and the phone is not even mine :'( please help
also my phone seems to be locked ....
Can you get phone into download mode? Install odin and all windows drivers. Take out batt plug up usb hold vol up and down and put in battery. If that doesn't work there is a cable you can but that might force it into download mode
Sent from my SGH-T959 using XDA App
stephenj37826 said:
Can you get phone into download mode? Install odin and all windows drivers. Take out batt plug up usb hold vol up and down and put in battery. If that doesn't work there is a cable you can but that might force it into download mode
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
i"ve tried that but no luck =/
Can you get adb to work?
I had the same thing happen earlier, I was flashing back a stock ROM in Odin, which I have done before, and this time it was doing the cache files and the phone went black and removed from Odin, now this PC-Computer icon is up. Holding down the power-button just blanks for a second then puts back to the phone-pc screen, my phone was hardware locked so the power+volumes does nothing, and the computer won't recognize the phone in adb.
Mothafizzy said:
I had the same thing happen earlier, I was flashing back a stock ROM in Odin, which I have done before, and this time it was doing the cache files and the phone went black and removed from Odin, now this PC-Computer icon is up. Holding down the power-button just blanks for a second then puts back to the phone-pc screen, my phone was hardware locked so the power+volumes does nothing, and the computer won't recognize the phone in adb.
Click to expand...
Click to collapse
exactly....we are having the same problem....we cant do anything but watch that damn sign
did you fix it?
sadly mine was that way and I had to get it replaced
nomadrider123 said:
sadly mine was that way and I had to get it replaced
Click to expand...
Click to collapse
so i guess if you soft brick a hardware lock vibrant ur out of luck?
so you called tmobile to get a replacement?
El Cipitio said:
so i guess if you soft brick a hardware lock vibrant ur out of luck?
so you called tmobile to get a replacement?
Click to expand...
Click to collapse
If you have tried everything twice and nothing worked .Don't mess around with customer services. You need to talk to tech services they got me a replacement
Download Mode trick.. it worked for me.
Ok guys! here you go.... If you feel like you semi-bricked your phone and cannot boot into download mode.. there is a trick that might work for some or it might not doesn't hurt to try, but damn sure worked for me... Make sure phone is connected to computer with ODIN Opened,..
1. Unplug your phone from usb
2. Take out battery (and mini sd and sim)
3. Plug usb back into phone.
4. Hold down up and down volume keys while putting battery back into the phone. IT SHOULD BOOT INTO DOWNLOAD MODE. if not sorry. Sometimes when people flash back and forth the up and down volume keys get reversed... so try volume down and power.. or volume up and power. GOOD LUCK!!!
tee34life said:
Ok guys! here you go.... If you feel like you semi-bricked your phone and cannot boot into download mode.. there is a trick that might work for some or it might not doesn't hurt to try, but damn sure worked for me... Make sure phone is connected to computer with ODIN Opened,..
1. Unplug your phone from usb
2. Take out battery (and mini sd and sim)
3. Plug usb back into phone.
4. Hold down up and down volume keys while putting battery back into the phone. IT SHOULD BOOT INTO DOWNLOAD MODE. if not sorry. Sometimes when people flash back and forth the up and down volume keys get reversed... so try volume down and power.. or volume up and power. GOOD LUCK!!!
Click to expand...
Click to collapse
No luck, currently going through a relentless trial-error process of different usb-battery-sim/sd-volume-power buttons. Just found out insurance which I thought was covered on my phone via Asurion through T-Mobile is only covering one of the phones on my line, yet I bought them both with warranties at the same time... Pretty bummed, Only is looking like paying the deductable fee for a new phone as if lost/stolen.. Hope something pulls through.
Just a small deviation
1. Take out the battery
2. Plug the USB into the phone
3. Plug USB into the PC
4. Hold down the Volume up/down + Power button with one hand
5. Put the battery back in with the other hand
6. Wait for the phone2pc icon to flash 2 times and on the second time when the screen goes black release only the POWER BUTTON
7. When you see the digging Android you can let go of the Volume buttons
That is the only way I could get it to work

Bricked Vibrant

Hi everyone, i need ur help please. I have a t-mobile vibrant (sgh-t959). I tried the CM on it. After installing the su kernel, it bricked. Now it keeps rebooting with the samsung galaxy s gt-I9000 screen (the vibrant screen no longer comes up). I can't even get to download mode by pressing vol up + vol down + pwr buttons. Please help me. I m kinda desperate ...
http://forum.xda-developers.com/showthread.php?t=836815&page=6
Although I didn't have the exact same problem, I had a very similar problem. The above link will give you more details about the problem I was having and how I solved it (thanks to click1's suggestion).
I could not get into download mode no matter what sequence of keys I pressed and my phone hanged on the "samsung vibrant" screen. IF your phone is detected by Odin or the computer when you plug it in (doesn't have to be in download mode and your computer doesn't have to be able to show you the usb drives - just as long as there is a confirmation that a usb was connected is enough), then Android SDK will help you force the phone into download mode.
If this doesn't work, your next bet is to physically make a JIG for it:
forum.xda-developers.com/showthread.php?t=819551
From what I have read, this last one physically forces the phone to go into download mode by using the 5th pin on the MicroUSB key.
I know how you feel - I just got my fixed last night and my problem seemed very unique, I wish I could offer more help but I hope these will work for you.
Thank you very much. It finally came back to life. Feel so much better now!
downnload mode, I hold both volume buttons in and connect the usb and it I get into download mode everytime
rickyx said:
Thank you very much. It finally came back to life. Feel so much better now!
Click to expand...
Click to collapse
No problem, I'm glad that solved your problem. I'll see if I can put this solution on the Noob guide so others can see it easily before they resort to making a JIG.
osugsxr said:
downnload mode, I hold both volume buttons in and connect the usb and it I get into download mode everytime
Click to expand...
Click to collapse
the newer vibrants are hardware locked so you can't get into download mode that way. This is why you have to use the SDK to do it.
FriendlyCanadian said:
No problem, I'm glad that solved your problem. I'll see if I can put this solution on the Noob guide so others can see it easily before they resort to making a JIG.
the newer vibrants are hardware locked so you can't get into download mode that way. This is why you have to use the SDK to do it.
Click to expand...
Click to collapse
Does this mean if the sdk will not recognize that the device is connected then i have to make this JIG Thing? because my phone is stuck at the connect phone to pc screen.
raziel26 said:
Does this mean if the sdk will not recognize that the device is connected then i have to make this JIG Thing? because my phone is stuck at the connect phone to pc screen.
Click to expand...
Click to collapse
Yes, make it or buy one. I know who sells them for a VERY reasonable price. If you're interested Pm me for more info.
okay found a solution for now, my issue was related to ROM manager with the SD card, kept getting wrong MD5 Sum!! Really pissed me off about this since I was running through ODIN correctly,
Solution...
Updated the rom with Eugene froyo!! This brought me out of boot looping and now I have a rom on my phone so I can go back to the basics of flashing I hope, I am going to give it a try to see what happens
raziel26 said:
Does this mean if the sdk will not recognize that the device is connected then i have to make this JIG Thing? because my phone is stuck at the connect phone to pc screen.
Click to expand...
Click to collapse
No...being the noob that I am, I'm constantly finding new ways to brick my phone. So tonight, I bricked it with the phone to PC screen. ADB can't detect it and neither can odin. This is FIXABLE, I tried the method here:
http://forum.xda-developers.com/showthread.php?t=771247
Method 3 worked for me. Even if you have a hardware locked phone, I think there is a method around this which involves taking the battery out and putting it back in but I don't remember where I read this in the forums....I know I did read it though, you have to search to find it. Try these before you resort to making the JIG.

[Q] BRICKED

i dont know what to do now, i have 2 samsung vib's and i redid one back to stock with odin, then updated it with the kies to the 2.2 i did a factory reset on my other phone and it rebooted into the vibrant screen,,,i try everything to get it to the download screen but it wont go,,,and my computer does not recognise it ....mind you it see's the other phone but not this one.....i dont know what to do now,,,and yes ive tryed every way to get it to the download or recovery screen no go on anything
crose948 said:
i dont know what to do now, i have 2 samsung vib's and i redid one back to stock with odin, then updated it with the kies to the 2.2 i did a factory reset on my other phone and it rebooted into the vibrant screen,,,i try everything to get it to the download screen but it wont go,,,and my computer does not recognise it ....mind you it see's the other phone but not this one.....i dont know what to do now,,,and yes ive tryed every way to get it to the download or recovery screen no go on anything
Click to expand...
Click to collapse
Have you tried the hardware jig? That is a guarantee getting it into download mode.
How are you trying to enter download screen? Did you disable voodoo first?
Sent from my SGH-T959 using XDA App
If it boots on its own without pushing power, take battery out and plug in usb, hold only volume up and down replace battery and should jump right to download. Bricked my phone every way possible, by now I can get out of almost anything.
Sent from my SGH-T959 using XDA App
phone is stuck on the black screen with white vibrant in middle and samsung at bottom, no matter what i do or how i do it thats were the screen sits....pull batt. plug in remove usb....it does not matter,,,and what is jig.
richtertrevor78 said:
If it boots on its own without pushing power, take battery out and plug in usb, hold only volume up and down replace battery and should jump right to download. Bricked my phone every way possible, by now I can get out of almost anything.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
nope stillgoes right to right to------------------ooooooo hold on rebooting now ,,woot
Hold volume up and volume down plus the power button, after the SECOND time you see the vibrant logo ONLY release the power button before the vibrant logo appears for the third time. Works every time for me
Sent from my SGH-T959 using XDA App
Are you sure you installed the samsung drivers right?
Rolling with TW's latest beefy beast.
I'm pretty sure if those options didn't work your Vibrant is a hardware locked one. You may want to try the hardware jig as mentioned above. I've fixed my hardware locked vibrant countless times with that little tool
http://www.youtube.com/watch?v=iSaeaAcJHqw
Moved of: Samsung Vibrant > Vibrant Android Development
To: Samsung Vibrant > Vibrant Q&A
Please put your questions to: Vibrant Q&A
Closed Thread
Snozbeary said:
Are you sure you installed the samsung drivers right?
Rolling with TW's latest beefy beast.
Click to expand...
Click to collapse
ya it computer see's the other vibrant phone and i was able to revert back to stock with odin,,,this phone it not recognised so i cant flash with odin..
phone wont even let me do a rom flash from rom manager,,it starts to then just gets stuck at the vibrant screen again....wtf,,,well the phone boots up normal but i cant get into the recovery or rom flash,,,,every time i try the phone gets stuck on the samsung load screen,,it takes 3-5 times just to get it to boot right ,,,after that,,im clueless
crose948 said:
ya it computer see's the other vibrant phone and i was able to revert back to stock with odin,,,this phone it not recognised so i cant flash with odin..
phone wont even let me do a rom flash from rom manager,,it starts to then just gets stuck at the vibrant screen again....wtf,,,well the phone boots up normal but i cant get into the recovery or rom flash,,,,every time i try the phone gets stuck on the samsung load screen,,it takes 3-5 times just to get it to boot right ,,,after that,,im clueless
Click to expand...
Click to collapse
well after tons of hours and trying every way i came to the concusion that the usb port might be damaged or corroded on the phone, like ive stated before my other vibrant connects perfect to the computer,,and on this phone i can wiggle the cord by the phone and you can hear it connect / disconnect from computer, but it still it not recognized by the comp. and so i dont think the jig would work becuase u would need a good usb connection to begin with,im thinking my gf got some water / snow or somthing in the port corroding the connection, i took a magnafying glass and seams like there is some green corrosion in the port.
nevermind ...........
Also bricked my phone - Will the jig help?
After trying to install Froyo through Kies and failing, after trying to put stock ROM with Odin and again failing, i got the phone to the state that the only thing I get when powering up the phone is the picture of "phone --! -- computer". It is not trying to boot at all.
Will the jig help to get it into download mode? Are their any other ways to bring it to life or it is total brick?
Tnx
marksht said:
After trying to install Froyo through Kies and failing, after trying to put stock ROM with Odin and again failing, i got the phone to the state that the only thing I get when powering up the phone is the picture of "phone --! -- computer". It is not trying to boot at all.
Will the jig help to get it into download mode? Are their any other ways to bring it to life or it is total brick?
Tnx
Click to expand...
Click to collapse
I had this same issue trying to install bionix v.. I made a jig and the jig just booted it to the phone ! computer screen... I called tmobile and they sent me a new phone!
marksht said:
After trying to install Froyo through Kies and failing, after trying to put stock ROM with Odin and again failing, i got the phone to the state that the only thing I get when powering up the phone is the picture of "phone --! -- computer". It is not trying to boot at all.
Will the jig help to get it into download mode? Are their any other ways to bring it to life or it is total brick?
Tnx
Click to expand...
Click to collapse
Pull everything out of your phone (battery, sim, sdcard)
Open ODIN on your PC and plug the USB into it (PC)
Put the battery back in and hold down both volume e
keys
Plug the USB into the phone
Should be in Download Mode and you can let go of the volume keys.
Removed----
marksht said:
Ok, so now need to build the jig.
Tnx
Click to expand...
Click to collapse
Try one more thing... Pull the battery and put it back in so your phone is off...plug in the charger so you get the charging screen...now when you see the charging icon hold in both volume buttons and the power button. You will see the icon flash off and back on then flash off and back on ...now when it flashes off for the third time...let go of the power button only..keep holding the volume keys
see if it will go into download mode that way
i had tried all of these methods and the jig...none of them worked...ervery time the screen turned on, it was the phone ! computer screen....no charging screen, nada..no matter what i did
ok try this too, pull batt,,,plug in charger,,,put batt. in then as soon as it lights up pull batt again,,then put back in fast,,then pull again as soon as it lights up ,do this 4 times and see what happens,,,my phone will get stuck on the samsung screen,and no matter what i do it gets / stays stuck like that untill i do the batt pull reinstall 4 times .then on the 4 th time i leave batt. in and phone boots up normal

[Q] my note wont power on but computer recognizes

my note froze up for 5 minutes so i took the battery out and tried to power on by button but no response have been on the charger for hours and nothing. I plugged it in to the computer and is recognized but phone wont show any life. I tried all physical button combos and took battery out for 10 minutes. Phone is and has never been rooted. please any help.
can you get it into download mode?
1. Disconnect the phone from your pc or wall socket
2. Plug a usb cable into your pc, but not into the phone yet
3. Remove and replace the phone battery
4. while holding the volume down and power buttons, connect the phone to the usb that is connected to your pc
If you're in download mode you'll see a big green android guy with the word "Downloading..." underneath.
Not sure what could've gone wrong, but if you can get into download mode, then there is still hope yet for your device.
If you can get into download mode, and you are willing to try some things, it may be possible for you to flash a stock recovery using a tool like Odin. There are guides available for this, like the one here. I would wait on some of the more experienced folks to put in their 2 cents still...like i said, that has never happened to me, so i'm not sure what could be the problem...
KodeRiter722 said:
can you get it into download mode?
1. Disconnect the phone from your pc or wall socket
2. Plug a usb cable into your pc, but not into the phone yet
3. Remove and replace the phone battery
4. while holding the volume down and power buttons, connect the phone to the usb that is connected to your pc
If you're in download mode you'll see a big green android guy with the word "Downloading..." underneath.
Not sure what could've gone wrong, but if you can get into download mode, then there is still hope yet for your device.
If you can get into download mode, and you are willing to try some things, it may be possible for you to flash a stock recovery using a tool like Odin. There are guides available for this, like the one here. I would wait on some of the more experienced folks to put in their 2 cents still...like i said, that has never happened to me, so i'm not sure what could be the problem...
Click to expand...
Click to collapse
I just tried and the same thing happens on my computer it say new hardware found, trying to install software "QHSUSB_DLOAD" as it did before. thanks for response
derricke123 said:
I just tried and the same thing happens on my computer it say new hardware found, trying to install software "QHSUSB_DLOAD" as it did before. thanks for response
Click to expand...
Click to collapse
U sure u never tried to root it or anything? Either way that's a hard brick my friend, it can't be fixed with software, you have to send it in for repair, or warranty that sucker. I suggest u just warranty

Need HELP! phone wont turn on

Hello, so i have a international S3 and have flashed ROMS since I got it. I am running Omega JB V28 with Syiah Kernel 1.7rc. All is fine for over a week. Just right now my phone froze and did not want to wake up, So I held down volume up, menu button, and power button to restart my phone. I accidentally let go too early before I saw the Galaxy s3 logo and now, I cannot start my phone??? I cant even go into recovery mode.... Any suggestions on how to get this to work??? thanks!
Try this:
Take battery out for 5 minutes and place it back in. Then do the required combination to get into recovery. If not try download mode...
If that fails... put the phone on charge and hopefully the battery will show up showing its charging. If not I can give no more advice.
Hope this helped.
Sent from my GT-I9300 using xda premium
skrapi said:
Try this:
Take battery out for 5 minutes and place it back in. Then do the required combination to get into recovery. If not try download mode...
If that fails... put the phone on charge and hopefully the battery will show up showing its charging. If not I can give no more advice.
Hope this helped.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Tried all of the above, took battery out, recovery didnt work. Battery out agin and download mode didnt work. Pluged phone in charge and not battery images. Tried recovery and download mode while phone plugged in charger and still nothing happens. It is weird cus I didnt prick my phone or anything, it was fine for a week. Just tried to restart it and let go to early and no this happens :/
As warranty is void you are best to source a USB recovery jig to access download mode before anything else .
jje
niclz said:
Tried all of the above, took battery out, recovery didnt work. Battery out agin and download mode didnt work. Pluged phone in charge and not battery images. Tried recovery and download mode while phone plugged in charger and still nothing happens. It is weird cus I didnt prick my phone or anything, it was fine for a week. Just tried to restart it and let go to early and no this happens :/
Click to expand...
Click to collapse
You certainly pricked your S3 by at most flashing a non compatible rom for ur S3 (international) or u just messed up with something during installation,head to samsung customer care.
nhariamine said:
You certainly pricked your S3 by at most flashing a non compatible rom for ur S3 (international) or u just messed up with something during installation,head to samsung customer care.
Click to expand...
Click to collapse
my phone has been rooted and flashed Omega ROM since may. The phone was working fine for 2 weeks after flashing the new Omega JB Rom v28 and it just shuts off and not power up now. I heard of people installing wrong ROMS or wrong versions of it then bricking their phons, but my phone was flashed the correct ROMS and was in a working state for 2 weeks since my last flashed ROM, never heard of a phone bricking out of now where after u've just used it... I am stopped and dont know how it happened :/ i ordered a jig and thought that might be my only way out. Anyone know if you can restart ur phone from download mode?
JJEgan said:
As warranty is void you are best to source a USB recovery jig to access download mode before anything else .
jje
Click to expand...
Click to collapse
That is pretty much wut I have came down too... i ordered a jig online and hopefully I can get my phone into download mode from there. Any way there is a opstion the just restart your phone in download mode like there is in recovery mode??
bump
niclz said:
That is pretty much wut I have came down too... i ordered a jig online and hopefully I can get my phone into download mode from there. Any way there is a opstion the just restart your phone in download mode like there is in recovery mode??
Click to expand...
Click to collapse
I may be ,isunderstanding what you are asking here but are you asking how to get your device in to download mode by using a button combo like getting in to recovery mode if so:
ODIN/Download Mode
Make sure your device is completely off
Key Combos: Volume Down + Home
While holding both of them simultaneously press the Power button until the green robot is visible on the screen indicating that handset is in Download mode.
Then press Volume Up to accept the disclaimer
Recovery Mode
Make sure your device is completely off
Key Combos: Volume Up+ Home
While holding both of them simultaneously press the Power button
carrd said:
I may be ,isunderstanding what you are asking here but are you asking how to get your device in to download mode by using a button combo like getting in to recovery mode if so:
ODIN/Download Mode
Make sure your device is completely off
Key Combos: Volume Down + Home
While holding both of them simultaneously press the Power button until the green robot is visible on the screen indicating that handset is in Download mode.
Then press Volume Up to accept the disclaimer
Recovery Mode
Make sure your device is completely off
Key Combos: Volume Up+ Home
While holding both of them simultaneously press the Power button
Click to expand...
Click to collapse
A JIG is a usb end that plugs into your phone and forces it into Download Mode, all you would need to do it plug it in and it 'should' go into Download Mode.
Then hopefully you know what to do from there
skrapi said:
A JIG is a usb end that plugs into your phone and forces it into Download Mode, all you would need to do it plug it in and it 'should' go into Download Mode.
Then hopefully you know what to do from there
Click to expand...
Click to collapse
USB jigs are great but most people only order one when they get a problem. I have not had a problem yet but I think its time to order a USB jig just incase
carrd said:
USB jigs are great but most people only order one when they get a problem. I have not had a problem yet but I think its time to order a USB jig just incase
Click to expand...
Click to collapse
I actually am familiar on how to go to download moe and recovery mode. The weird thing is that my phone is unresponsive. It doesnt go to download mode or recovery mode at all. With no signs of life. And this happened yesterday morning after i used my phone for like 5 minutes when it was fine. I didnt brick my phone cus I wasnt flashing anything when this happened I just tried to reboot my phone and once the screen turned off it never came back one... kinda wierd and un heard of. But I did order a jig so hopefully it can be forced into download mode and take it from there....
skrapi said:
A JIG is a usb end that plugs into your phone and forces it into Download Mode, all you would need to do it plug it in and it 'should' go into Download Mode.
Then hopefully you know what to do from there
Click to expand...
Click to collapse
Im running into the same problem.
I can get to the download screen but unfortunately do not know what to do from there (tried Odin and heimdal but still wont boot)
Just as another note I was able to get to my DL screen by removing battery > installing battery > holding both volume buttons then plugging in usb.
Just in case u cant get to it.
If anyone knowledgable can pm me i would appreciate it (phone is not for this forum) because i do not know what to do after i get the dl screen up apparently.
THANKS!
im having the same problem did the jigg work
You can't get into download mode? Or it won't work at all?
Running Beanstalk - JB 4.2.2 - OC Kernel - UCKK2 Modem
Sent from my SGH-I997 using xda app-developers app
wont turn on or go into recovery or download mode dosent even show batt on screen when i plug it in
Only thing I can think of is a crap battery that needs replacing.. You could also go to a metro store and ask em to restore it to stock. Almost all of em have the Samsung factory device. If u can get it into download mode I have a thread where I put instructions on how to recover from brick. (After 6 days of trial and error).
http://forum.xda-developers.com/showthread.php?t=1952278
Running Beanstalk - JB 4.2.2 - OC Kernel - UCKK2 Modem
Sent from my SGH-I997 using xda app-developers app
has anybody tried the unbricking usb thing
The jig or the Samsung device?
I havnt used the jig but tons of people have with success. You can make one or buy one off eBay for like $10.
The device I have used before on someone else's phone, AND you can use it to unlock your phone.
Running Beanstalk - JB 4.2.2 - OC Kernel - UCKK2 Modem
Sent from my SGH-I997 using xda app-developers app
Azrael-09 said:
The jig or the Samsung device?
I havnt used the jig but tons of people have with success. You can make one or buy one off eBay for like $10.
The device I have used before on someone else's phone, AND you can use it to unlock your phone.
Running Beanstalk - JB 4.2.2 - OC Kernel - UCKK2 Modem
Sent from my SGH-I997 using xda app-developers app
Click to expand...
Click to collapse
Yes the jig got mine for 4.35 And Im able to use another s3 or any android? Jig should b here Monday hope it works I all ready replaced phone with AT&T and got refeb. Phone if jig don't won't I have insurance on phone or maybe contact Samsung.

Categories

Resources