Installed ICS 4.0.3 on my sgh-i717, a few days later it stopped charging and was unable to be recognized on any PC. I connected it to Kies via wifi, put the stock att rom back on it, reflashed though CWM, flashed counter and still nothing, set it back to samsung, got a new phone.
THen yesterday (2 days after i got my new phone) I flashed the new OnlyOne ICS rom 4.0.4 on my phone, then not even 3 hours later, my USB wasnt working again.......charges when it wants, but CANNOT be recognized by and PC....wtf?
Any ideas please!!! ?? THank you!
USB Ports
Just out of curiosity, have you tried a different usb port? Sometimes (and I think it's windows fault) I can use something on a certain port for months, then it will stop working, changing ports fixes it, then when / if that port stops working i'll switch back to the first port I started with... rinse / repeat.
Remember the old Nintendo Carts, when they would get dusty, they wouldnt work until you cleaned them? Could be the same thing, issue with the port, dust, or just going bad.
It could either be a driver issue / and or the actual port. Esp if it's an older usb 1.1 spec port.
I am running OnlyOne, and it's running fine here as far as computer seeing it / charging. I don't think you would get 2 phones that are defective back to back, Check your computer first, especially if it consistently will charge with the AC adapter and not the computer.
mtnichols04 said:
Installed ICS 4.0.3 on my sgh-i717, a few days later it stopped charging and was unable to be recognized on any PC. I connected it to Kies via wifi, put the stock att rom back on it, reflashed though CWM, flashed counter and still nothing, set it back to samsung, got a new phone.
THen yesterday (2 days after i got my new phone) I flashed the new OnlyOne ICS rom 4.0.4 on my phone, then not even 3 hours later, my USB wasnt working again.......charges when it wants, but CANNOT be recognized by and PC....wtf?
Any ideas please!!! ?? THank you!
Click to expand...
Click to collapse
Ive tried different ports on 3 different computers, tried cleaning, tried on usb 1.0 1.1 and 2.0 no luck, tried another person usb cable, earlier today with the wall charger it would charge, now, it wont charge at all. Kies drivers are installed, Thank you for your ideas though
I have an IT degree, Ive been working with electronics\computers for 10+ years and Im completely dumbfounded...
jb0nd38372 said:
Just out of curiosity, have you tried a different usb port? Sometimes (and I think it's windows fault) I can use something on a certain port for months, then it will stop working, changing ports fixes it, then when / if that port stops working i'll switch back to the first port I started with... rinse / repeat.
Remember the old Nintendo Carts, when they would get dusty, they wouldnt work until you cleaned them? Could be the same thing, issue with the port, dust, or just going bad.
It could either be a driver issue / and or the actual port. Esp if it's an older usb 1.1 spec port.
I am running OnlyOne, and it's running fine here as far as computer seeing it / charging. I don't think you would get 2 phones that are defective back to back, Check your computer first, especially if it consistently will charge with the AC adapter and not the computer.
Click to expand...
Click to collapse
mtnichols04 said:
Installed ICS 4.0.3 on my sgh-i717, a few days later it stopped charging and was unable to be recognized on any PC. I connected it to Kies via wifi, put the stock att rom back on it, reflashed though CWM, flashed counter and still nothing, set it back to samsung, got a new phone.
THen yesterday (2 days after i got my new phone) I flashed the new OnlyOne ICS rom 4.0.4 on my phone, then not even 3 hours later, my USB wasnt working again.......charges when it wants, but CANNOT be recognized by and PC....wtf?
Any ideas please!!! ?? THank you!
Click to expand...
Click to collapse
Ouch..... Sorry Bud........
I hope you still have insurance on your phone and I would put it back to stock and see if that works out for you buddy.
If you have access to another phone , try to download seraphim a great from and put it on there and flash it. Inside of the newest seraphim there is a USB storage mount option which should fix your problem. I hope this will fix the problem
Sent from my GT-P7510 using XDA
Doesn't sound like a ROM issue or one that requires a different ROM to be installed just because it contains a USB selection. To me it sounds like you have a bad cable or a few bad cables. I would try a new micro usb cable. I have had that issue happen a few times with quite a few phones. Cables that just don't click when inserted don't always make the proper contacts. And owning another cable can't hurt, just make sure it is a good brand.
severinca said:
If you have access to another phone , try to download seraphim a great from and put it on there and flash it. Inside of the newest seraphim there is a USB storage mount option which should fix your problem. I hope this will fix the problem
Sent from my GT-P7510 using XDA
Click to expand...
Click to collapse
I tried reverting back to a Gingergbread rom, tried re flashing a few different roms, no luck. Tried a few different usb plugs from different phones... how can you mess up a micro USB just from flashing... makes no sense.
Idk about the charging part, but i had the same issue with pc not recognizing my phone after i flashed new ROM on it and could not share files and what not i found a solution for that try this. Make sure phone is unpluggdd from pc. Go to settings>Wireless and network>USB utilities> connect storage to pc then it will tell u to plug your phone, do so. And phone should prompt you with the normal USB storage click it and your good to go.
Sent from my SGH-I717R using XDA
Related
so about 2 weks ago i did the ota update to android 3.2. ever since then my tab has been acting crazy. it wont recognize charging unless i restart it plugged in. it will say mtp connected plugged in or not to usb. if plugged in the wall i cant turn it off it just boots itself back up. im trying to root but i cant get this thing to do SH*T. ive re installed drivers multiple times and if i go to device manager it wont show tab. any help would be great guys and gals
im running the ota update 3.2 for a few weeks now, no issues really other then a few tweaks I did to make the device fasters, I would suggest doing a factory reset via the settings menu, backup yer data first!! as for the drivers, the fastest way to get them to work is to install kies for galaxy tab, google it...my galaxy tab 10.1 is actually rooted, overclocked, and running a custom kernel...so its pretty fast, but even with all stock I have not had the problems you are talking about.
theandroidnerd said:
im running the ota update 3.2 for a few weeks now, no issues really other then a few tweaks I did to make the device fasters, I would suggest doing a factory reset via the settings menu, backup yer data first!! as for the drivers, the fastest way to get them to work is to install kies for galaxy tab, google it...my galaxy tab 10.1 is actually rooted, overclocked, and running a custom kernel...so its pretty fast, but even with all stock I have not had the problems you are talking about.
Click to expand...
Click to collapse
Well now I'm rooted running ics rom and over clocked, but my tab for whatever reason doesn't recognize being plugged in USB or ac. It did this prior to root but after 3.2 update. Like right now it says 3% battery and I need to plug it up. Problem is that its currently plugged in to AC charger. I can get it to sometimes recognize the plug if I restart it multiple times with plug in. If I power off then plug in it automatically powers up.
I just restarted while plugged in AC and it now says battery at 100% lol this thing is nuts.
Sell it to a developer really cheap, do a warranty exchange, ODIN back to stock and repeat.... I assume drivers on the PC are not the issue.
Yeah the PC drivers are fine. I really don't want to sell it or have to do the warranty exchange. If I send it back I'll have to unroot. Not to mention not having it for a while.
^ then keep pulling your hair out
Honestly, I understand. Also hate when people send devices in for warranty stuff.... but your issue sounds legit. I would be concerned if there was an issue with the charging port long-term.
ok so they said they would fix it but im trying to unroot and i need the stock recovery i downloaded the zip files for dummies and tied to use odin3 to flash the stock recovery that cam in the zip but it keeps failing.
so i just kept restarting into download mode and it finally worked
now that i have it unrooted its on 3.1 i need it on 3.2 before i send it back. i tried to do the update from the tab but it did one update but not for android 3.2.
So Im probably gonna send my tab back tomorrow. Do you guys think they will give me crap because my tabs now on 3.1 when I complained about an issue after update to 3.2?
xanmanz31 said:
So Im probably gonna send my tab back tomorrow. Do you guys think they will give me crap because my tabs now on 3.1 when I complained about an issue after update to 3.2?
Click to expand...
Click to collapse
If the issue is still happening, then no because its a hardware issue. Root or 3.2 didnt break it as the ODIN proved. Silly question, but you did try a different cable? And unless 3.2 changed something, only pershoots kernel allows for actual USB charging, stock TWUX never supported it. Only accepted a 2amp 3.7v on the correct cable (power wires are switched or something).
Sent from my SPH-D700 using XDA App
no i didnt try another cable and for me to run odin i had to restart the tab many times and when its plugged in the wall sometimes it recognizes and sometimes not when i plug in usb it wont mount storage or even to kies like the tab will show connected but the computer wont recognize tried all usb ports. i figured they might ask how i got it to 3.1 after doing the update without rooting i put stock recovery back on also to completely go back stock
xanmanz31 said:
no i didnt try another cable and for me to run odin i had to restart the tab many times and when its plugged in the wall sometimes it recognizes and sometimes not when i plug in usb it wont mount storage or even to kies like the tab will show connected but the computer wont recognize tried all usb ports. i figured they might ask how i got it to 3.1 after doing the update without rooting i put stock recovery back on also to completely go back stock
Click to expand...
Click to collapse
Definately sounds like a cable or 30 pin port issue. I will mention that Samsung has always been cheap with their cables on their phones anyway, but I haven't had an issue with the tabs. Onboard USB ports are the only ones I trust. Too many issues with front panel ports in the past with ODIN. I wouldn't worry about 3.1 vs 3.2 though. Of course you could always put 3.2 back on, I think there is an ODINable 3.2 around somewhere, but its been a while since I looked. Send it back, or try a different cable.
Sent from my SPH-D700 using XDA App
Got the tab back and rooted again with ics rom. Ended up replacing 30 pin port.
Sent from my GT-P7510 ics
Any one having problems with their pc recognizing thier fascinate after flashing AOKP?
I can charge but not get it to recognize the phone.
I have tried different cables and ports on the pc.
Uninstalled and reinstalled drivers.
Anyone have a good set of windows 7 drivers that work for AOKP ICS roms?
Dustin1980 said:
Any one having problems with their pc recognizing thier fascinate after flashing AOKP?
I can charge but not get it to recognize the phone.
I have tried different cables and ports on the pc.
Uninstalled and reinstalled drivers.
Anyone have a good set of windows 7 drivers that work for AOKP ICS roms?
Click to expand...
Click to collapse
Are you using fascinate drivers? Try the galaxy nexus drivers.
Sent from my Glitched AOKP Unicorn.
Got a good working link to just the drivers and not the sdk? It would be much appreciated. Also thanks for your work on all the different roms...so nice to have the choice. I feel the best thing about android is choice!
I down loaded the gnex drivers uninstalled the old ones restarted the pc and installed the new drivers.
Dustin1980 said:
I down loaded the gnex drivers uninstalled the old ones restarted the pc and installed the new drivers.
Click to expand...
Click to collapse
And your result was?
Sent from my Glitched AOKP Unicorn.
Nada.
I plug the phone in and I get nothing. It doesn't even pop up detecting device down by the notification area of windows... I tried toggling in glitch between mtp and usb mass storage.
I even uninstalled all the drivers, installed the android dev kit and tried that.
Dustin1980 said:
Any one having problems with their pc recognizing thier fascinate after flashing AOKP?
I can charge but not get it to recognize the phone.
I have tried different cables and ports on the pc.
Uninstalled and reinstalled drivers.
Anyone have a good set of windows 7 drivers that work for AOKP ICS roms?
Click to expand...
Click to collapse
This may sound silly, but happens to me a lot, try "jiggeling" cable were it plugs into phone. Seriously, sometimes its just not connecting. I gave this advice to many and it does work. No idea why.
sent from my ICY CNA !
Maybe not entirely related.. But i had pageonce locked to only work on my device. Have flashed hundreds of times with no issue. Until aokpm4. Pageonce servers kept nuking my credentials every time i restored data. Their support said my device id was changed and not showing as my phone anymore. Kinda weird
Sent from my SCH-I500 using xda premium
I tried that. And other cables. two oem samsung and two third party cables. it charges fine no data... it's not a big deal right now but one bad flash and i wouldn't be able to odin
Dustin1980 said:
I tried that. And other cables. two oem samsung and two third party cables. it charges fine no data... it's not a big deal right now but one bad flash and i wouldn't be able to odin
Click to expand...
Click to collapse
Try navigating to the USB device in Device Manager and uninstalling the drivers. Then disconnect/reconnect it, sometimes this clears up issues.
sendan said:
Try navigating to the USB device in Device Manager and uninstalling the drivers. Then disconnect/reconnect it, sometimes this clears up issues.
Click to expand...
Click to collapse
the device doesn't show up at all...i even unplugged every usb device other than kb and mouse
Try redownloading the ROM and wiping and reflashing. I can't help to much I run OSX and Ubuntu and they figure it out and download the necessary drivers automatically. Damn user friendly technology.
Stephen.k.spear said:
Try redownloading the ROM and wiping and reflashing. I can't help to much I run OSX and Ubuntu and they figure it out and download the necessary drivers automatically. Damn user friendly technology.
Click to expand...
Click to collapse
I finally remembered that i have two laptops in the house and grabbed them and tried to get it hooked up to one of those...no dice. I'm thinking possibly something wrong with the data pins on the usb connector of my phone.
I'm paranoid about flashing anything because if something goes wrong I wouldn't be able to odin it and start over again...
I guess i just need to relax and enjoy the phone the way it is until may...then go buy something brand new and flash the hell out of that...
Thanks for all your help and work!
Dustin1980 said:
I finally remembered that i have two laptops in the house and grabbed them and tried to get it hooked up to one of those...no dice. I'm thinking possibly something wrong with the data pins on the usb connector of my phone.
I'm paranoid about flashing anything because if something goes wrong I wouldn't be able to odin it and start over again...
I guess i just need to relax and enjoy the phone the way it is until may...then go buy something brand new and flash the hell out of that...
Thanks for all your help and work!
Click to expand...
Click to collapse
have you tried cleaning the pins in the usb port on
the phone?
droidstyle said:
have you tried cleaning the pins in the usb port on
the phone?
Click to expand...
Click to collapse
I had cleaned the pins with rubbing alcohol, a bit of felt and a toothpick (too small for a qtip) no dice.
Then yesterday evening i plugged into the computer to charge rather than walking to the other room to get my charger and i heard the Da dum of it recognizing my phone...it installed it and up pops the device...
I think my phone is like a crazy girlfriend...she is mean as hell to you all the time then when you get ready to dump her she decides to be nice and make you feel guilty you though about ditching her.
Dustin1980 said:
I had cleaned the pins with rubbing alcohol, a bit of felt and a toothpick (too small for a qtip) no dice.
Then yesterday evening i plugged into the computer to charge rather than walking to the other room to get my charger and i heard the Da dum of it recognizing my phone...it installed it and up pops the device...
I think my phone is like a crazy girlfriend...she is mean as hell to you all the time then when you get ready to dump her she decides to be nice and make you feel guilty you though about ditching her.
Click to expand...
Click to collapse
Sounds good
Sent from my Glitched AOKP Unicorn.
So a little history, I flashed my vibrant from Bionix v1.3.1 (fishmanmod) to ICS and started to have a lot of troubles with random restarts and battery issues. Prior to ICS everything was perfect. I've tried so many different versions of ICS and all of them have resulted in random shut downs. The most recent one I tried was Slim ICS. After having such bad luck with ICS roms I decided to go back to Bionix. However my phone now cannot be recognized by my computer which was weird because it did when I flashed it back to stock to install ICS cleanly. I tried various different drivers, uninstalled, reinstalled kies, almost everything I thought of. So then I was like okay, I'll just go back to a nandroid backup of Bionix. Stupid idea, should have read up more on that as it softbricked my phone. Now I'm stuck with a phone that stays on the Vibrant screen. I can get it into download mode with holding vol+ and power but that is no use because windows keeps saying it cannot recognize my device. I can't get it to recovery mode either to flash any roms I have on the phone. It might be a hardware issue because my mothers vibrant gets detected with the same drivers but just a couple of days ago I flashed my phone back to stock with odin which really confuses me. Does anyone have any ideas I could do? Is there a way to get into recovery mode to flash different roms? Is there a manual way of installing the drivers or surefire way of knowing if the vibrant has hardware issues?
Also when I flashed back to stock with odin it did take a good hour of installing and reinstalling drivers for my computer to recognize it in download mode. I've tried 3 different cables, one by samsung and the other two are third party. All these cables work on my mother's vibrant. I've also tried a different computer as well, no luck.
Try deleting ALL USB drivers from your PC and plug in the phone. It should automatically search and download drivers. If that doesn't work then its most likely something to do with the USB cable. I recently soft bricked my vibrant too and my USB would not work at all but it worked fine on a friends phone(weird). So I bought a new one from T-Mobile themselves and it worked! I was really close to believing I had a bad USB port on my phone,if a new cable doesn't work that could be the issue for you. There are a few places online that will replace your USB port on the phone for around 40 bucks, a new USB cable from T-Mobile will cost around $15.
PS: You can search ADB reboot recovery but this will not work unless you can connect to the PC. I personally would buy a new cable from T-Mobile just to know if its a bad USB port on your phone.
Sent from my SGH-T959 using XDA Premium App
Running ICS Passion
iTz KeeFy said:
Try deleting ALL USB drivers from your PC and plug in the phone. It should automatically search and download drivers. If that doesn't work then its most likely something to do with the USB cable. I recently soft bricked my vibrant too and my USB would not work at all but it worked fine on a friends phone(weird). So I bought a new one from T-Mobile themselves and it worked! I was really close to believing I had a bad USB port on my phone,if a new cable doesn't work that could be the issue for you. There are a few places online that will replace your USB port on the phone for around 40 bucks, a new USB cable from T-Mobile will cost around $15.
PS: You can search ADB reboot recovery but this will not work unless you can connect to the PC. I personally would buy a new cable from T-Mobile just to know if its a bad USB port on your phone.
Sent from my SGH-T959 using XDA Premium App
Running ICS Passion
Click to expand...
Click to collapse
Yeah I've read in another post about how someone bought a replacement cable from T-Mobile which fixed the problem. I find it weird how the stock samsung cable does not work yet the T-Mobile cable did. What makes the 15 dollar T-Mobile cable better? I'll definitely give it a shot though.
faze2 said:
Yeah I've read in another post about how someone bought a replacement cable from T-Mobile which fixed the problem. I find it weird how the stock samsung cable does not work yet the T-Mobile cable did. What makes the 15 dollar T-Mobile cable better? I'll definitely give it a shot though.
Click to expand...
Click to collapse
I'm not sure what makes it better to be honest, it's just one of those things where their cables work better. It is most definitely more durable than the stock cable that came with my phone. If you have a problem with Tmobile's USB cable not working then you most likely have a bad port on your phone(happens more than you might think). I feel like a new cable will solve your problem tho, let us know if it works!
Sent from my SGH-T959 using XDA Premium App
Running ICS Passion
So I bought the T-Mobile universal data cable in store for 12.99 and turns out it did not work. That's okay, they told me I could return in within 30 days to get a full refund. Now my only hope is to send it to someone who could repair it.
The phone can go into download mode, so hopefully once this usb port gets fixed I can finally get into odin. Thanks iTz KeeFy for the suggestion to try a different cable.
faze2 said:
So I bought the T-Mobile universal data cable in store for 12.99 and turns out it did not work. That's okay, they told me I could return in within 30 days to get a full refund. Now my only hope is to send it to someone who could repair it.
The phone can go into download mode, so hopefully once this usb port gets fixed I can finally get into odin. Thanks iTz KeeFy for the suggestion to try a different cable.
Click to expand...
Click to collapse
Your welcome, too bad it didn't work. Atleast you know its a bad USB port now. I know www.mobiletechvideos.com is a trusted place to send your vibrant. I'm not positive they fix USB ports but I'm pretty sure they do. I would check there first, good luck!
EDIT:They do fix USB ports, here is the link.
http://mobiletechvideos.mybigcommerce.com/samsung-vibrant-usb-port-repair/
Sent from my SGH-T959 using xda premium
So I just got back my vibrant from MobileTechVideos and the usb port works now! I was able to odin back to stock and all is good now. Thanks for the recommendation iTz KeeFy and I recommend anyone who has USB troubles to send your phone to MobileTechVideos, it's legit.
faze2 said:
So I just got back my vibrant from MobileTechVideos and the usb port works now! I was able to odin back to stock and all is good now. Thanks for the recommendation iTz KeeFy and I recommend anyone who has USB troubles to send your phone to MobileTechVideos, it's legit.
Click to expand...
Click to collapse
Awesome, glad your up and running again.
Sent from my SGH-T959 using XDA Premium App
My I777 has been acting up lately, and now I'm out of options and wondering what my next move should be.
For several days when I'd connect the phone to the PC via USB, it started saying "this device can perform faster when on a USB 2.0 port..." - which, my ports ARE 2.0.. transfers were taking forever. Now, anytime I plug it in it simply says "USB Device not recognized" - I've tried the OEM cable, the plethora of other cables, 4 different PC's... *ALL* have the same result.
My concern is with a custom ROM on it and no way to get any PC to recognize the phone to get it back to root - how should I proceed from here for warranty purposes? I've only had it since March - just wondering what's gonna happen at this point - or is this even fixable? All the threads I've seen say it needs replaced... but with no way to unroot, etc., I'm just unsure how this is gonna go.
Thanks for any advice.
Midnight1970 said:
My I777 has been acting up lately, and now I'm out of options and wondering what my next move should be.
For several days when I'd connect the phone to the PC via USB, it started saying "this device can perform faster when on a USB 2.0 port..." - which, my ports ARE 2.0.. transfers were taking forever. Now, anytime I plug it in it simply says "USB Device not recognized" - I've tried the OEM cable, the plethora of other cables, 4 different PC's... *ALL* have the same result.
My concern is with a custom ROM on it and no way to get any PC to recognize the phone to get it back to root - how should I proceed from here for warranty purposes? I've only had it since March - just wondering what's gonna happen at this point - or is this even fixable? All the threads I've seen say it needs replaced... but with no way to unroot, etc., I'm just unsure how this is gonna go.
Thanks for any advice.
Click to expand...
Click to collapse
You didn't use Rom Manager ever did you? Please say no
Have you tried re-installing Kies to get the drivers working again?
Then you can: - http://forum.xda-developers.com/showthread.php?t=1313659
Midnight1970 said:
My I777 has been acting up lately, and now I'm out of options and wondering what my next move should be.
For several days when I'd connect the phone to the PC via USB, it started saying "this device can perform faster when on a USB 2.0 port..." - which, my ports ARE 2.0.. transfers were taking forever. Now, anytime I plug it in it simply says "USB Device not recognized" - I've tried the OEM cable, the plethora of other cables, 4 different PC's... *ALL* have the same result.
My concern is with a custom ROM on it and no way to get any PC to recognize the phone to get it back to root - how should I proceed from here for warranty purposes? I've only had it since March - just wondering what's gonna happen at this point - or is this even fixable? All the threads I've seen say it needs replaced... but with no way to unroot, etc., I'm just unsure how this is gonna go.
Thanks for any advice.
Click to expand...
Click to collapse
You can always use Mobile Odin to flash back to stock since your on a custom ROM.
jthatch12 said:
You didn't use Rom Manager ever did you? Please say no
Click to expand...
Click to collapse
Absolutely NOT.
This is a situation that's been coming over a period of time, starting with the inability to see it as a USB 2.0 device when initially plugged in, and now has deteriorated to the point that it can't even be seen.
Ruger20 said:
Have you tried re-installing Kies to get the drivers working again?
Then you can: - http://forum.xda-developers.com/showthread.php?t=1313659
Click to expand...
Click to collapse
Yeah, I sure did - nothing. Even in recovery, it won't "mount" usb there either.
Samsung's have a crappy USB port. It fails sometimes. You have a hard time charging at all?
But like I stated above, even without a computer connection you can get Mobile Odin and flash back to stock, as long as your rooted.
I'm having this same issue. I just got the phone earlier this week and I am unable to get bit connected to my pc to root or Odin. I have installed and uninstalled Kies multiple times on two different computers, tries different ports, and checked if the cable worked by using another phone (PC recognized without an issue). I get the USB not recognized or the 2.0 USB message. If I enable debugging, I can connect regularly and transfer files through windows explorer. But if I use USB debugging off, then nothing will work. I've tried using odin and it will just get stuck at setup connection or cache.img and then I'd have to pull the device. I've tries updating through Kies when it shows the USB 2.0 message but once the S2 hits download mode then the computer stops recognizing it. I have also tried installing the i777 drovers on the Samsung website and its still a no go. Does anyone know how to fix this? Its not rooted so mobile Odin won't help me now.
Sent from my Samsung Infuse on CM10 using Tapatalk
Uninstall drivers, reboot, install updated ones, reboot, Clean USB ports on your phone and computer, clean the cable, Replace usb cable, replace the actual lower dock connector PCB. -> http://www.ebay.co.uk/itm/ws/eBayISAPI.dll?ViewItem&item=140663430775&ssPageName=ADME:X:RTQ:GB:1123
There are about a billion things you can do. I've replaced mine at least twice, I swear that part is designed to fail after a few months. I ordered one for my GF's i777 and it should be here soon, can't wait to fix it! I hate having broken sh_t.
allyourbase said:
Uninstall drivers, reboot, install updated ones, reboot, Clean USB ports on your phone and computer, clean the cable, Replace usb cable, replace the actual lower dock connector PCB. -> http://www.ebay.co.uk/itm/ws/eBayISAPI.dll?ViewItem&item=140663430775&ssPageName=ADME:X:RTQ:GB:1123
There are about a billion things you can do. I've replaced mine at least twice, I swear that part is designed to fail after a few months. I ordered one for my GF's i777 and it should be here soon, can't wait to fix it! I hate having broken sh_t.
Click to expand...
Click to collapse
Yes. USB cables go bad often, especially these crappy micro B connectors.
allyourbase said:
Uninstall drivers, reboot, install updated ones, reboot, Clean USB ports on your phone and computer, clean the cable, Replace usb cable, replace the actual lower dock connector PCB. -> http://www.ebay.co.uk/itm/ws/eBayISAPI.dll?ViewItem&item=140663430775&ssPageName=ADME:X:RTQ:GB:1123
There are about a billion things you can do. I've replaced mine at least twice, I swear that part is designed to fail after a few months. I ordered one for my GF's i777 and it should be here soon, can't wait to fix it! I hate having broken sh_t.
Click to expand...
Click to collapse
It is the OEM cable that came with my Samsung Infuse. It worked with the T989 3 days ago and it's not working with my i777. Its strange because I tried it with my infuse again and I am able to Odin just fine. Could it really be an issue with my USB or will it be a PCB issue? I would rather or not disassemble my phone if it is a PCB issue. Should be able to do a warranty exchange though.
Sent from my SAMSUNG-SGH-I777 using Tapatalk 2
DangKid said:
It is the OEM cable that came with my Samsung Infuse. It worked with the T989 3 days ago and it's not working with my i777. Its strange because I tried it with my infuse again and I am able to Odin just fine. Could it really be an issue with my USB or will it be a PCB issue? I would rather or not disassemble my phone if it is a PCB issue. Should be able to do a warranty exchange though.
Sent from my SAMSUNG-SGH-I777 using Tapatalk 2
Click to expand...
Click to collapse
I hate to break it to you brother but it's damn near impossible to determine what the actual culprit could be, your best best is to try each and every single different thing I've listed. The end result being changing the PCB which one, isn't that hard, and two, is very cheap the only problem is waiting for the board to come in the mail.
allyourbase said:
I hate to break it to you brother but it's damn near impossible to determine what the actual culprit could be, your best best is to try each and every single different thing I've listed. The end result being changing the PCB which one, isn't that hard, and two, is very cheap the only problem is waiting for the board to come in the mail.
Click to expand...
Click to collapse
I understand, which is why I'm hoping that by posting my story up, someone who has experienced the same problem can help. If not, then I can get others' opinion on it and when the issue is fixed, the solution will be available for future users.
Sent from my Samsung Infuse on ParanoidDroid using Tapatalk
Its the usb board on your phone.
I have the same problem so now I have to get mine changed too.
I've soft bricked my phone 2 times with this problem and it takes hours to get Odin to pick up my phone.
Swap the faulty chip and you should be good.
transmitted from the Dark Obelisk
Noz85 said:
Its the usb board on your phone.
I have the same problem so now I have to get mine changed too.
I've soft bricked my phone 2 times with this problem and it takes hours to get Odin to pick up my phone.
Swap the faulty chip and you should be good.
transmitted from the Dark Obelisk
Click to expand...
Click to collapse
Its strange because when I enable USB debugging, I can get a "USB connection" on the phone and data transfers fine. But when I turn it off, I get a "MTP connection" and sometimes it'll connect (5% of the time) and allow me to transfer data. But when lies tries to update when that mtp connection is active, it'll hang when the phone goes into download mode. Did you have this same issue?
Sent from my Samsung Infuse on ParanoidDroid using Tapatalk
DangKid said:
Its strange because when I enable USB debugging, I can get a "USB connection" on the phone and data transfers fine. But when I turn it off, I get a "MTP connection" and sometimes it'll connect (5% of the time) and allow me to transfer data. But when lies tries to update when that mtp connection is active, it'll hang when the phone goes into download mode. Did you have this same issue?
Sent from my Samsung Infuse on ParanoidDroid using Tapatalk
Click to expand...
Click to collapse
I f you're able to transfer files via mass storage with USB debugging enabled then you can (most likely) rule out hardware failure on your phone.
If anything this sounds like a driver issue on the cpmputer. Are you running windows? If so remove and reinstall the drivers for your phone.
Still think its hardware.
I can connect 1/100 of the times I'm plugged into a computer. Its not a driver issue because my girlfriend has an i777 as well and no problems for her connecting at all.
Its not ROM related because I have this problem with all ROMs.
transmitted from the Dark Obelisk
Noz85 said:
Still think its hardware.
I can connect 1/100 of the times I'm plugged into a computer. Its not a driver issue because my girlfriend has an i777 as well and no problems for her connecting at all.
Its not ROM related because I have this problem with all ROMs.
transmitted from the Dark Obelisk
Click to expand...
Click to collapse
Does that apply to ums as well? From his description he can connect in ums just fine. Its only mtp that's giving him problems. In his case, with the problem only being in one connection mode, it leads me to think drivers. In your case, tested against another s2 I'd say hardware.
Just tried using a Motorola cable and a third PC and my chances of connection increased to about 15-20%. Kies and Odin failed on me a few times just like I had described before. But eventually Odin was able to flash okay. Finally on ICS on my i777! I think I'll stay on stock since I'd rather not go USB and PC hunting to flash stock if anything goes wrong.
Sent from my SAMSUNG-SGH-I777 using Tapatalk 2
DangKid said:
Just tried using a Motorola cable and a third PC and my chances of connection increased to about 15-20%. Kies and Odin failed on me a few times just like I had described before. But eventually Odin was able to flash okay. Finally on ICS on my i777! I think I'll stay on stock since I'd rather not go USB and PC hunting to flash stock if anything goes wrong.
Sent from my SAMSUNG-SGH-I777 using Tapatalk 2
Click to expand...
Click to collapse
Good to hear you got it working BUT do note if you flashed the stock ICS be aware of the eMMC SUPERBRICK BUG you should read up on the issues here is a link to some info on it......
http://forum.xda-developers.com/showthread.php?t=1746181
i have a sgs3 i9300. i recently flashed the stock MJ9 android 4.3 firmware to it and it was working fine till 3 days ago when it started to show driving mode sign and then i flashed the rom again 2 or 3 times i wiped user data and now the driving mode sign is gone but i cannot connect the phone to the computer, when i connect it nothing happens, on mobile or computer. nothing. (no usb charging or mass storage or any sounds or anything) however i can charge it using usb charger that came with it and strangely i can even use the phone in download mode with computer to flash it using odin. i read somewhere that its not a hardware issue so im really looking forward to some help here. thanks
Many similar threads, lots of possible reasons. Best search for the most likely causes, which will include your pc, leads, phone hardware etc.
Sent from my GT-I9300 using Tapatalk
boomboomer said:
Many similar threads, lots of possible reasons. Best search for the most likely causes, which will include your pc, leads, phone hardware etc.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
tested it on different computer still the same. phone hardware should not be the issue since i am able to use it in download mode and charge it using the charger. so hardware port cannot be the problem.
codetoeternity said:
tested it on different computer still the same. phone hardware should not be the issue since i am able to use it in download mode and charge it using the charger. so hardware port cannot be the problem.
Click to expand...
Click to collapse
Search = the cable
JJEgan said:
Search = the cable
Click to expand...
Click to collapse
changed the cable. still the same. i saw another post about the same issue (quite old though and had no replies) and he was talking about some code like *#7280# (or similar code that opens up a hidden menu that allows to do something to fix it) but i opened that menu and those options werent there.
searched all over xda. tried all the things suggested (including the recovery firmware). still things remain the same. i still can flash it in download mode. but i cant charge it or anything. im sure its a software problem not a hardware problem. some serious help is required here
codetoeternity said:
searched all over xda. tried all the things suggested (including the recovery firmware). still things remain the same. i still can flash it in download mode. but i cant charge it or anything. im sure its a software problem not a hardware problem. some serious help is required here
Click to expand...
Click to collapse
Would suggest you uninstall Kies if you have it then download the new version (Kies for non Android 4.3 or Kies 3 for Android 4.3) from here Kies this will re-install the new drivers, re-boot your PC then plug your phone into your PC and you should get the message installing drivers.
Don't let Kies run at the same time as Odin otherwise it wont work but I guess you probably know that.
ag4751 said:
Would suggest you uninstall Kies if you have it then download the new version (Kies for non Android 4.3 or Kies 3 for Android 4.3) from here Kies this will re-install the new drivers, re-boot your PC then plug your phone into your PC and you should get the message installing drivers.
Don't let Kies run at the same time as Odin otherwise it wont work but I guess you probably know that.
Click to expand...
Click to collapse
done. still no use. since the device isnt even noticed by the computer. its like nothing is attached. however in download mode i get a lot of devices in device manager. im unable to charge my phone or connect as mtp thats the problem. i dont think the port is faulty coz the download mode works just fine.
USB port on the phone faulty or motherboard .
JJEgan said:
USB port on the phone faulty or motherboard .
Click to expand...
Click to collapse
in that case the phone shudnt work in download mode. i think.
codetoeternity said:
in that case the phone shudnt work in download mode. i think.
Click to expand...
Click to collapse
Have you tried different USB ports on the PC, there have been reports before that for some reason the port people normally use stops working and by switching to another USB port it works
Forgot to say if not already tried, turn off the phone pull the battery leave for a minute or two, replace the battery and reboot then try to connect it.
ag4751 said:
Have you tried different USB ports on the PC, there have been reports before that for some reason the port people normally use stops working and by switching to another USB port it works
Forgot to say if not already tried, turn off the phone pull the battery leave for a minute or two, replace the battery and reboot then try to connect it.
Click to expand...
Click to collapse
have tried different ports and different computers different cables etc and the battery was out all day still no use
codetoeternity said:
have tried different ports and different computers different cables etc and the battery was out all day still no use
Click to expand...
Click to collapse
Not having much luck are you, one last thing I have read before is using a pin or cocktail stick (you may need a magnifying glass as well) to gently clean the USB port on the phone and the cable, remove the battery first, but be careful you don't actually damage anything, that's why you need to be gentle with it.
Can you flash via ODIN successfully but phone not recognised by Windows??? Sounds like not all pins connecting properly. Clean connector VERY carefully...
Sent from my GT-I9300 using Tapatalk
ag4751 said:
Not having much luck are you, one last thing I have read before is using a pin or cocktail stick (you may need a magnifying glass as well) to gently clean the USB port on the phone and the cable, remove the battery first, but be careful you don't actually damage anything, that's why you need to be gentle with it.
Click to expand...
Click to collapse
i used a very sharp pin to clean the port on phone. did clean a bit, and had a bit of success. i cud charge my phone with the connector connected at a certain angle. if i wud touch it it would stop charging. but that went on for like 40 minutes and then it stopped working any ideas on how can i clean it? if i open the phone will i be able to clean it easily?
codetoeternity said:
i used a very sharp pin to clean the port on phone. did clean a bit, and had a bit of success. i cud charge my phone with the connector connected at a certain angle. if i wud touch it it would stop charging. but that went on for like 40 minutes and then it stopped working any ideas on how can i clean it? if i open the phone will i be able to clean it easily?
Click to expand...
Click to collapse
Never actually had to do it, only read what others have done, maybe an old dry toothbrush would do it as ling as you remember the gentle bit, if the pin did help then this could solve the problem for you it may simply be dust or dirt on the connections.
Would do both the phone and the cable end, not easy but worth a try as its free.