I did an NVflash after struggling to load VEGaN 7 for a couple days figuring it was the partition issue that I have read about. Flash went off without a hitch - or so I thought.
I went to flash VEGaN 7 again, but my computer would not recognize connection via USB. Attempted to login to clockwork mod but instead I get message - "booting recovery image".
Thinking a factory reset might somehow free up my USB connection I did a factory reset - now I'm stuck in a bootloop.
So, to review--
I can't connect to PC via USB, Access CWM, or get past the bootloop.
BTW - I noticed while looking for options to connect to USB that it appeared my Internal and external SD cards switched locations after the NV flash. External, although not accessible was 12.9 gig and my internal showed slightly less than 1 gig.
Anyway, is there any hope for my G tab - I have never been so frustrated over such a simple process in my entire life.
sorry looked for a way to move this post to the correct location...
gunnervike said:
I did an NVflash after struggling to load VEGaN 7 for a couple days figuring it was the partition issue that I have read about. Flash went off without a hitch - or so I thought.
I went to flash VEGaN 7 again, but my computer would not recognize connection via USB. Attempted to login to clockwork mod but instead I get message - "booting recovery image".
Thinking a factory reset might somehow free up my USB connection I did a factory reset - now I'm stuck in a bootloop.
So, to review--
I can't connect to PC via USB, Access CWM, or get past the bootloop.
BTW - I noticed while looking for options to connect to USB that it appeared my Internal and external SD cards switched locations after the NV flash. External, although not accessible was 12.9 gig and my internal showed slightly less than 1 gig.
Anyway, is there any hope for my G tab - I have never been so frustrated over such a simple process in my entire life.
Click to expand...
Click to collapse
When you NVFlashed, did you use the version with or without CWM. If you did the version without CWM then that would explain no CWM.
When you say you can't connect to PC are you talking about APX mode (NVflash)?
Go here http://viewsonic-gtablet-for-dummies.webs.com/ and follow the instructions for CODE RED step by step. Make sure download everything via the links on the dummies site to make sure you get the right stuff.
Al
No I used the version with CWM, which is why I was suprised to see the "booting recovery image" and then it just continued to boot. I tried both APX via USB and a typical USB connection after loading --where PC gave error "device not identified".
gunnervike said:
No I used the version with CWM, which is why I was suprised to see the "booting recovery image" and then it just continued to boot. I tried both APX via USB and a typical USB connection after loading --where PC gave error "device not identified".
Click to expand...
Click to collapse
So, just to verify, you hold Vol(-) and press/hold Power, 3 birds appear & screen goes black...that is APX mode. Connect usb cable to PC & what does the PC say?
USB device not recognized -
Still having that problem with USB device not recognized.
However, I have gone to ...for dummies site and reflashed device using the "flash USB driver" to temorarily gain access with USB connection. With NVFlash I Am back to having clockworkMod and working GTab with original software 1.1
Again going to flash rom - but Upon connecting USB i get the message "USB device not recognized" - I have attmpted to mount USB through CWM, but still getting that same error.
gunnervike said:
Still having that problem with USB device not recognized.
However, I have gone to ...for dummies site and reflashed device using the "flash USB driver" to temorarily gain access with USB connection. With NVFlash I Am back to having clockworkMod and working GTab with original software 1.1
Again going to flash rom - but Upon connecting USB i get the message "USB device not recognized" - I have attmpted to mount USB through CWM, but still getting that same error.
Click to expand...
Click to collapse
If your tab boots, you don't have to use CWM/mount & storage to transfer your rom to the internal sd. Put your external in your PC, copy the rom to it, move back to the tab & copy to your internal. There are also other ways to transfer it but we can talk about that later if you like.
If that works you can still flash your rom & then we can work on getting the usb up.
So, the usb not recognized is when you try to connect after your tab is either all booted up or in CWM mount & storage (and not when you are in APX mode doing NVFlash)?
If you look in device manager what does it show?
Try connecting your tab to a differet PC & see it detects it correctly?
If it works on another PC, you may want to tryto use USBDview http://www.nirsoft.net/utils/usb_devices_view.html to look at the USB dvices that are connected or have been connected to your PC. You can find the gTab devices in the list & then use it's command line options (see instructions included with it) to remove(uninstall) them from the PC. Then you can reconnect to see if it will detect & install the driver correctly.
Can't use external load on pc to transfer rom. No card access.
USB did work in apx mode following instructions in code red. I thought of usin another pc and duplicated the failed results there.
Device manager showed yellow exclamation mark and would'n't install any driver I pointed it to (both computers) Unknown USB device.
Btw I want to thank you for trying to help me out on this. You people who lend your knowledge are commendable.
gunnervike said:
Can't use external load on pc to transfer rom. No card access.
USB did work in apx mode following instructions in code red. I thought of usin another pc and duplicated the failed results there.
Device manager showed yellow exclamation mark and would'n't install any driver I pointed it to (both computers) Unknown USB device.
Click to expand...
Click to collapse
OK, try this. We are going to use Mobisynapse to wirelessly transfer files to & from your PC to the tab.
Download mobisynapse from my dropbox http://dl.dropbox.com/u/36150173/Mobisynapse.exe & install on your PC.
From your gTab, download Mobisynapse system tool from my dropbox to your tab & install http://dl.dropbox.com/u/36150173/com.mobisystems.office_registered-1.apk.
Start the app on the tab, click More & select Connect to PC to switch it to ON.
Start the Mobisynapse on your PC, it shoud see your tab, once it sees it click connect.
From there, go to the Files icon & you should see an Explorer type screen. PC on the left, tablet on the right. You can transfer files in either direction. Transfer your Rom files or whatever you want.
Let me know when you have downloaded the apps from my dropbox so I can remove them.
Al
I downloaded them and installed, on tab it shows up as officesuite. When I run it "more" is not an option. On pc it simply says (can not connect to android device) under "choose devices". I did turn on USB debugging on tab.
gunnervike said:
I downloaded them and installed, on tab it shows up as officesuite. When I run it "more" is not an option. On pc it simply says (can not connect to android device) under "choose devices". I did turn on USB debugging on tab.
Click to expand...
Click to collapse
Opp! Put the wrong one there. Give me a few & I'll put the correct on there.
aabbondanza said:
Opp! Put the wrong one there. Give me a few & I'll put the correct on there.
Click to expand...
Click to collapse
Here's the correct on for the tab app:
http://dl.dropbox.com/u/36150173/Mobisynapse%20system%20tool_1.3.apk
aabbondanza said:
Opp! Put the wrong one there. Give me a few & I'll put the correct on there.
Click to expand...
Click to collapse
Ok, there we go. Gimme a few
Do I need to create a "roms" folder, and is it supposed to be the zip folder or the files within the zip folder?
gunnervike said:
Do I need to create a "roms" folder, and is it supposed to be the zip folder or the files within the zip folder?
Click to expand...
Click to collapse
It's easier that way, that way you can easily differntiate it from other files/folders. If you create the folder, then put the zipped rom inside the folder.
I turned connect to pc on. Running mobisynapse on pc it sees the tab just fine. I click connect and it pulls up info about tab, BUT when I go to files tab --- right side of screen is greyed out. It won't transfer files.
gunnervike said:
I turned connect to pc on. Running mobisynapse on pc it sees the tab just fine. I click connect and it pulls up info about tab, BUT when I go to files tab --- right side of screen is greyed out. It won't transfer files.
Click to expand...
Click to collapse
Third icon from the left...looks like a little file cabinet.
lol, yeah 3rd from left...
It seems to connect just fine, but under the file tab I can only see files from the PC on the left - the right side doesn't show any files and all buttons are greyed out. Again, under the home tab I have access to the GTab just fine. I can see apps, contacts, etc. but under file tab - no files on right side and buttons are not accessable.
So do you see the left (PC side)? Is the right side populated at all & what is in the drop down folder box (should be /sdcard)!
I keep getting a green Star appear in my notifications bar which keeps saying I need to download a battey upgrade but I dont know where it's coming from and how I get rid of it.
any suggestions
Thanks
download "airpush detector" - might find it
BigMrB said:
download "airpush detector" - might find it
Click to expand...
Click to collapse
Thanks
It found my live Everton wallpaper app which I think might have caused it.
I will report back
Connection to PC
Hi, I have big problem with my phone. First, it is not problem with MTP driver! My computer dont recognize connected phone. When I connect phone to PC, phone start recharging and Initializing MTP, but PC doesnt do *TDN* sound. When I connect flash disk trough USB OTG to my phone - it work. Other Samsung connect to my PC works good. I cant connect phone in "USB mass storage" - doesnt work. So I think, it is software problem in phone.
I tried:
Instaling a lot of roms (only in CWM recovery), pull up battery for a few minutes, format memories, restore my efs file ( I had copy efs file), manualy instal kernel, tried USB debugging ON/OFF, instal manualy MTP driver, uninstal/instal kies
Sorry for my english, isnt good
mrkrystofik said:
Hi, I have big problem with my phone. First, it is not problem with MTP driver! My computer dont recognize connected phone. When I connect phone to PC, phone start recharging and Initializing MTP, but PC doesnt do *TDN* sound. When I connect flash disk trough USB OTG to my phone - it work. Other Samsung connect to my PC works good. I cant connect phone in "USB mass storage" - doesnt work. So I think, it is software problem in phone.
I tried:
Instaling a lot of roms (only in CWM recovery), pull up battery for a few minutes, format memories, restore my efs file ( I had copy efs file), manualy instal kernel, tried USB debugging ON/OFF, instal manualy MTP driver, uninstal/instal kies
Sorry for my english, isnt good
Click to expand...
Click to collapse
You should probably have started a new thread instead of posting in someone else's, too.
So here is the deal - earlier I could connect my SGS2 to PC with USB Debbuging turned on, and nothing poped up and I could use storage and sd card on PC and at the same time on the phone, like open it with some file explorer, and install apps when still connected to PC... Sound awesome, because now there is this - When I am in USB debbuging and connected to PC, it cant find storages, so I have to disable debugging, and there pops up this USB Mass Storage when i connect the cable. When it is connected to PC, I cant access files on the phone in that moment.... So what is wrong??
Will be pleased for all suggestions..
Thanks
Retko85 said:
So here is the deal - earlier I could connect my SGS2 to PC with USB Debbuging turned on, and nothing poped up and I could use storage and sd card on PC and at the same time on the phone, like open it with some file explorer, and install apps when still connected to PC... Sound awesome, because now there is this - When I am in USB debbuging and connected to PC, it cant find storages, so I have to disable debugging, and there pops up this USB Mass Storage when i connect the cable. When it is connected to PC, I cant access files on the phone in that moment.... So what is wrong??
Will be pleased for all suggestions..
Thanks
Click to expand...
Click to collapse
Android Manager Wifi -=or=- Air Droid -=or=- if the rom you're running has working FTP you can use that ^^
Remove the drivers
Retko85 said:
So here is the deal - earlier I could connect my SGS2 to PC with USB Debbuging turned on, and nothing poped up and I could use storage and sd card on PC and at the same time on the phone, like open it with some file explorer, and install apps when still connected to PC... Sound awesome, because now there is this - When I am in USB debbuging and connected to PC, it cant find storages, so I have to disable debugging, and there pops up this USB Mass Storage when i connect the cable. When it is connected to PC, I cant access files on the phone in that moment.... So what is wrong??
Will be pleased for all suggestions..
Thanks
Click to expand...
Click to collapse
When you connect to computer, dont do it in Debugging mode. If you change it windows (forcing MTP) dont like that. So it will require you to remove phone and reboot. But try the following also
delete all old drivers and remove them in registry. (if needed check the below link)
http://forum.xda-developers.com/showthread.php?t=1882942
Still not working go to device manger "type it in start"
Go to View
Select Hidden Driver
Go To Non_Plug and Play Drivers
Right Click on Hardware Policy Driver
Go To Driver Tab,
Stop this device
and Disable it
Restart Windows ( unplug phone first, disable network card also)
Disable WiFi or network card, (double tap)
Plug in Phone
Allow windows to load the drivers on your phone.
(don't stop this at all)
Look for phone.
Later you can add updated drivers if you would like. Remember windows keeps all old drivers, even if its jacked up. PnP will still run.
This works on Vista and above. haven't tested it on XP.
IMPORTANT
U must re-enable the change to the device manager after this, or each time you reboot it will reload the drivers.
I have this weird problem, I can't move files from my PC to S3 but it can do everything else.
What works:
1. I can see my phone in windows explorer including all the files.
2. I can copy files inside the phone. (using the phone)
3. I can copy folders from S3 to PC.
What doesn't:
1. When connected to USB i can see the files in windows explorer in the phone, i can right click and copy them or drag but it does not paste on the destination folder.
2. When I try to copy files on the computer from the SD card to the same folder using windows explorer a pop up window comes out saying "Cannot copy (title of file being copied): The device has either stopped responding or has been disconnected". But it is not disconnected nor did it stop because i can still browse the SD Card and the phone in windows explorer. When I copy the same file and folder inside the phone it works.
3.If i use Odin to try and flash another image it sees the phone but just sits without transfering even when phone is in download mode
What I already tried
1. Checking and un-checking USB debugging.
2. Turning the phone off an on again.
3. Using another laptop. So I guess the problem is in the phone.
4. Using another USB cable.
5. Factory reset
6. fix permissions in rom manager
Phone Info:
Phone: Samsumg Galaxy S3 GTI9300
Android Version: 4.1.2
Kernel Version: 3.031- 368423 [email protected] #1
Any help appreciated!
Hey
Is the s3 drivers properly installed on your laptop??
Sent from my Awesome GT-I9300..!
I had a similar experience... here's what I did:
Uninstall kies.
Reboot pc
Reinstall kies
Enable usb debugging on your galaxy
Insert usb
Browse and copy.
Recommendation: use the same usb port every time you connect your device to the pc. At least on my system, it tries installing new Samsung modem drivers with every usc port I plug my phone into. And that's just silly.
Sent from my SGH-T999 using XDA Premium HD app
OK, I've been using Android phones for years and never had this problem!
When try to connect the phone to the pc I get the connection sound but nothing shows up in windows file manager? I've tried 3 cables (usb c to c and a to c).
I've clicked Transfer files on the s21, nothing.
But if I click transfer images I do get the phone appearing in file manager and I can access just the DMIC folder. So the cables working.
Is there some option deep in the phone that needs to be switched on to allow file transfer????
Thanks. . .
To answer my own question...
Samsung Smart Switch needs to be installed on the PC to provide the right drivers! Never had that before with any Android phone!!