[Q] About Superwipe - HTC EVO 3D

Is it wise to make superwipe every time when flashing a new rom?
Can this damage the phone?Beacause every time when i flash a new rom i make superwipe.
Before the EVO i had an ideos x5 and before the flashing i was making clean cache ,dalvin cache and manualy format the system partition.

yannis_labs said:
Is it wise to make superwipe every time when flashing a new rom?
Can this damage the phone?Beacause every time when i flash a new rom i make superwipe.
Before the EVO i had an ideos x5 and before the flashing i was making clean cache ,dalvin cache and manualy format the system partition.
Click to expand...
Click to collapse
No, it won't damage the phone in any way.
Its always a good idea to do when flashing a new rom.
Only if your flashing an updated version of the same rom with same base, its not necessary and you would probably want to keep all your data and settings.

zcink said:
No, it won't damage the phone in any way.
Its always a good idea to do when flashing a new rom.
Only if your flashing an updated version of the same rom with same base, its not necessary and you would probably want to keep all your data and settings.
Click to expand...
Click to collapse
I agree in all counts except to add that sometimes it is necessary to wipe, even on the same Rom. For example, if the dev changes from odex to deodex or vice versa, you should wipe. I recommend you follow whatever is suggested by the dev.
Sent from my PG86100

I've never used super wipe and get along just fine. I've flashed GB roms, ICS roms, sense, cm, miui back and forth many times.
"How come you are not baptized?"

You dont really need it per-say but it always handy to have on the sd card. No damage is caused.

Latest Superwipe
hi all, sorry to bring up this thread back to front...some questions;
1. wondering if this thread's superwipe is still in use..?
2. i found other superwipes in the OP's ROM thread, which one is the latest? is it the 'Modified_Superwipe.zip (2.232 Mb)'
3. can i use this to flash any roms? (unless the OP has a particular included)
thanks in advance

RNZart said:
hi all, sorry to bring up this thread back to front...some questions;
1. wondering if this thread's superwipe is still in use..?
2. i found other superwipes in the OP's ROM thread, which one is the latest? is it the 'Modified_Superwipe.zip (2.232 Mb)'
3. can i use this to flash any roms? (unless the OP has a particular included)
thanks in advance
Click to expand...
Click to collapse
1. I use it sometimes and it seems to work well.
2. Not sure if that's the latest, but I do use Chad's Modified Superwipe most of the time.
3. I believe so. The only thing I've heard lately is to NOT do a superwipe before flashing on of the CyanogenMod 9 ports as that has caused people to have bootloops.

Related

Couple of questions regarding ROMs and such.

Okay. Couple days ago, i got my new Samsung Galaxy S II. Fell in love with it. I previously had a Vibrant, but that met an unfortunate and violent demise. On the vibrant I hadn't been doing anything involving roms and such because i'd tried once, and completely fried the phone. LOL.
I managed to root my phone, and from what I've read, I didn't do the best method. What I did was get an unsecure kernel, and flashed that, then used a 1-click root type thing to root it. So one of my questions is, my clockwork mod isn't working, what's wrong with it? I downloaded ROM Manager, and flashed CWM. But when i reboot into recovery, i get the stock Samsung recovery screen. How can I get this to work?
And another question, is about roms such as Cyanogen mod. I really wanna get it. (I wont until I get CWM working, though.) And I'm just wondering. If I were to just go to ROM Manager, and flash cyanogen, would it work, or do i need to do more to my phone to be able to put on custom roms? I've never understood the concept of roms vs kernels vs firmware vs whatever else.
And if it matters, Samsung Galaxy S II, Android 2.3.3, rooted using SuperOneClick.
P.S Anything else that I should considering doing/putting onto my phone? And thanks in advance for halping.
Gutana said:
Okay. Couple days ago, i got my new Samsung Galaxy S II. Fell in love with it. I previously had a Vibrant, but that met an unfortunate and violent demise. On the vibrant I hadn't been doing anything involving roms and such because i'd tried once, and completely fried the phone. LOL.
I managed to root my phone, and from what I've read, I didn't do the best method. What I did was get an unsecure kernel, and flashed that, then used a 1-click root type thing to root it. So one of my questions is, my clockwork mod isn't working, what's wrong with it? I downloaded ROM Manager, and flashed CWM. But when i reboot into recovery, i get the stock Samsung recovery screen. How can I get this to work?
And another question, is about roms such as Cyanogen mod. I really wanna get it. (I wont until I get CWM working, though.) And I'm just wondering. If I were to just go to ROM Manager, and flash cyanogen, would it work, or do i need to do more to my phone to be able to put on custom roms? I've never understood the concept of roms vs kernels vs firmware vs whatever else.
And if it matters, Samsung Galaxy S II, Android 2.3.3, rooted using SuperOneClick.
P.S Anything else that I should considering doing/putting onto my phone? And thanks in advance for halping.
Click to expand...
Click to collapse
Okay, don't take this the wrong way, but it seems you're a bit lacking regarding knowledge about this phone... It'd pay to do your research beforehand in the SGS2 forum, read the FAQs, etc.
Okay, first off, all I can say is, go back to stock. Go flash a stock Samsung ROM for the device. Then, go into Chainfire's CF-Root Kernel thread, and download the appropriate kernel, and flash it using ODIN. After you've done that, you'll have ClockworkMod, and you'll be rooted. It is recommended that you flash another kernel though, after gaining root, as all the CF-Root kernel does it install ClockworkMod, and root the device. Personally, I recommend SiyahKernel.
If you need more detail or have any more questions, feel free to send me a PM.
Thanks,
screamworks.
screamworks said:
Okay, don't take this the wrong way, but it seems you're a bit lacking regarding knowledge about this phone... It'd pay to do your research beforehand in the SGS2 forum, read the FAQs, etc.
Okay, first off, all I can say is, go back to stock. Go flash a stock Samsung ROM for the device. Then, go into Chainfire's CF-Root Kernel thread, and download the appropriate kernel, and flash it using ODIN. After you've done that, you'll have ClockworkMod, and you'll be rooted. It is recommended that you flash another kernel though, after gaining root, as all the CF-Root kernel does it install ClockworkMod, and root the device. Personally, I recommend SiyahKernel.
If you need more detail or have any more questions, feel free to send me a PM.
Thanks,
screamworks.
Click to expand...
Click to collapse
Alright, I did what you said. I went to stock 2.3.4, used CF-root. And now about SiyahKernel, what are the advantages of it? And is there something wrong with just staying with the CF-Root kernel?
And as of where I am now, with just root and CWM, would i be able to switch ROMs and such?
Gutana said:
Alright, I did what you said. I went to stock 2.3.4, used CF-root. And now about SiyahKernel, what are the advantages of it? And is there something wrong with just staying with the CF-Root kernel?
And as of where I am now, with just root and CWM, would i be able to switch ROMs and such?
Click to expand...
Click to collapse
With a rooted device you'll be able to flash trough Odin or CMW recovery any rom you like.
Siyah kernel gives you a faster and more battery efficient phone and lets you set your own Voltage/ speed the processor has to use see this for the latest info
http://www.gokhanmoral.com/ and
http://forum.xda-developers.com/showthread.php?t=1263838
DirkTeur Velserbroncx said:
With a rooted device you'll be able to flash trough Odin or CMW recovery any rom you like.
Siyah kernel gives you a faster and more battery efficient phone and lets you set your own Voltage/ speed the processor has to use see this for the latest info
http://www.gokhanmoral.com/ and
http://forum.xda-developers.com/showthread.php?t=1263838
Click to expand...
Click to collapse
Alright, so i'm pretty much ready to go? Yayayayay.
And would you recommend any roms for me? XD
Gutana said:
Alright, I did what you said. I went to stock 2.3.4, used CF-root. And now about SiyahKernel, what are the advantages of it? And is there something wrong with just staying with the CF-Root kernel?
And as of where I am now, with just root and CWM, would i be able to switch ROMs and such?
Click to expand...
Click to collapse
SiyahKernel has a lot of advantages and improvements of CF-Root, which provides null, if I'm correct. Go check out the SiyahKernel thread in Original Development for details.
Yes, as stated, you can use CWM by itself to switch ROMs. Just remember that if you're switching ROMs (as opposed to performing a flash to a newer version of the same ROM), to perform a factor reset / wipe data, wipe cache, and wipe Dalvik cache (Advanced > wipe Dalvik cache) in ClockworkMod first.
Gutana said:
Alright, so i'm pretty much ready to go? Yayayayay.
And would you recommend any roms for me? XD
Click to expand...
Click to collapse
For a beginninger, I can't recommend MIUI highly enough. You could go with GalnetMIUI, which is a variant, but I personally prefer the official MIUI build. If you're looking for a more, 'pure' experience, go with CyanogenMod 7.1 stable.
screamworks said:
SiyahKernel has a lot of advantages and improvements of CF-Root, which provides null, if I'm correct. Go check out the SiyahKernel thread in Original Development for details.
Yes, as stated, you can use CWM by itself to switch ROMs. Just remember that if you're switching ROMs (as opposed to performing a flash to a newer version of the same ROM), to perform a factor reset / wipe data, wipe cache, and wipe Dalvik cache (Advanced > wipe Dalvik cache) in ClockworkMod first.
For a beginninger, I can't recommend MIUI highly enough. You could go with GalnetMIUI, which is a variant, but I personally prefer the official MIUI build. If you're looking for a more, 'pure' experience, go with CyanogenMod 7.1 stable.
Click to expand...
Click to collapse
Alright, one more question, sorry for the nooby-ness. Haha.
So going from my phone to for example Cyanogen, I'd backup in CWM, and Titanium backup (Or does CWM backup like, EVERYTHING?) and then factory reset, flash the rom using odin, and then use titanium backup to get my apps and settings back? orwhat.
Gutana said:
Alright, one more question, sorry for the nooby-ness. Haha.
So going from my phone to for example Cyanogen, I'd backup in CWM, and Titanium backup (Or does CWM backup like, EVERYTHING?) and then factory reset, flash the rom using odin, and then use titanium backup to get my apps and settings back? orwhat.
Click to expand...
Click to collapse
CWM backup (called a NANDroid backup), backs up everything. If you perform a NANDroid back, there's no need to perform a backup in Titanium Backup - it creates a full image of your system (the advantage to TB though, is that you can backup all your download apps and settings, then install the new ROM, and restore the backed up apps - If you restore a NANDdroid backup, it'll restore the old ROM, exactly as it was when the backup was made).
So yes, the installation process is, for CWM: copy the ROM.zip to your phone, then boot into CWM recovery. Hit the 'factory reset / wipe data' option, the 'wipe cache' option, and then go to Advanced, and hit the 'wipe Dalvik cache' option. After that, choose 'install ZIP from SDCARD', and choose your ROM.zip. After it finishes installing, just hit 'reboot system now', and you're good to go!
Usually, it's not required to use ODIN to flash a new ROM, unless there's a problem with the recovery.
All that said, it pays to read the thread for the ROM beforehand, as sometimes when moving from ROM to ROM (especially from stock), there's a few small things that may be required, like flashing the ROM twice, or whatever
screamworks said:
CWM backup (called a NANDroid backup), backs up everything. If you perform a NANDroid back, there's no need to perform a backup in Titanium Backup - it creates a full image of your system (the advantage to TB though, is that you can backup all your download apps and settings, then install the new ROM, and restore the backed up apps - If you restore a NANDdroid backup, it'll restore the old ROM, exactly as it was when the backup was made).
So yes, the installation process is, for CWM: copy the ROM.zip to your phone, then boot into CWM recovery. Hit the 'factory reset / wipe data' option, the 'wipe cache' option, and then go to Advanced, and hit the 'wipe Dalvik cache' option. After that, choose 'install ZIP from SDCARD', and choose your ROM.zip. After it finishes installing, just hit 'reboot system now', and you're good to go!
Usually, it's not required to use ODIN to flash a new ROM, unless there's a problem with the recovery.
All that said, it pays to read the thread for the ROM beforehand, as sometimes when moving from ROM to ROM (especially from stock), there's a few small things that may be required, like flashing the ROM twice, or whatever
Click to expand...
Click to collapse
Alright, i got that done. I've tried both MIUI and Cyanogen, and both are working and lookin wonderful. But the problem is I dont get data on either one. I've tried reflashing, rebooting, factory reset. Idunno what else to try. Do you know what could be causing this?
Gutana said:
Alright, i got that done. I've tried both MIUI and Cyanogen, and both are working and lookin wonderful. But the problem is I dont get data on either one. I've tried reflashing, rebooting, factory reset. Idunno what else to try. Do you know what could be causing this?
Click to expand...
Click to collapse
Check your APN settings (should be somewhere in Settings under mobile network or whatever). Look your's up online ('APN settings carrier y, country z), and if they're not correct, add them in.
screamworks said:
Check your APN settings (should be somewhere in Settings under mobile network or whatever). Look your's up online ('APN settings carrier y, country z), and if they're not correct, add them in.
Click to expand...
Click to collapse
Got everything working, thank you very much. Thanked every one of your posts
And I've asked too many questions for one person in one thread, I happen to have one more. How can I get the Android Market on Cyanogenmod? I downloaded build 115, and there wasn't a market, so i'll be using MIUI till I get that fixed. ><
Gutana said:
Got everything working, thank you very much. Thanked every one of your posts
And I've asked too many questions for one person in one thread, I happen to have one more. How can I get the Android Market on Cyanogenmod? I downloaded build 115, and there wasn't a market, so i'll be using MIUI till I get that fixed. ><
Click to expand...
Click to collapse
You're more than welcome
If you've got any other questions, feel free to PM me
With CyanogenMod, there's a bit of a story to it, but basically, they're not allowed to package Market, Gmail, Maps, etc. with the ROM, so you need to download a zip file called Gapps and flash it in CWM Recovery, you can find it here. You don't need to wipe anything when flashing this.
Also, build #115 isn't the latest, build #117 is (in fact, there's another, even more current one, but there's really nothing to it), but I don't believe there's any major changes.
screamworks said:
You're more than welcome
If you've got any other questions, feel free to PM me
With CyanogenMod, there's a bit of a story to it, but basically, they're not allowed to package Market, Gmail, Maps, etc. with the ROM, so you need to download a zip file called Gapps and flash it in CWM Recovery, you can find it here. You don't need to wipe anything when flashing this.
Also, build #115 isn't the latest, build #117 is (in fact, there's another, even more current one, but there's really nothing to it), but I don't believe there's any major changes.
Click to expand...
Click to collapse
Hey, I was having troubles messaging you, since it didn't show anything in the sent box, i assumed it didnt go through. So i guess ill be still asking you on here.
So about Cyanogen, which build is the best? And if i'm going from one build to another, like from 115, to 116, would i still have to do a complete wipe? And any other roms besides MIUI and Cyanogen you recommend? cause MIUI is giving me and couldn't generate md5 errors, and i cant restore to it, and i hate starting off without it set up how i like it. D: and yeah, thanks.
Gutana said:
Hey, I was having troubles messaging you, since it didn't show anything in the sent box, i assumed it didnt go through. So i guess ill be still asking you on here.
So about Cyanogen, which build is the best? And if i'm going from one build to another, like from 115, to 116, would i still have to do a complete wipe? And any other roms besides MIUI and Cyanogen you recommend? cause MIUI is giving me and couldn't generate md5 errors, and i cant restore to it, and i hate starting off without it set up how i like it. D: and yeah, thanks.
Click to expand...
Click to collapse
I only just the message 12 hours ago, if that helps?
Usually, your best bet is to go with the latest build, which you can get here. If it's stability you're looking for, go with the stable build, instead of nightlies.
Personally, out of all ROMs I've tried, I could only ever stand MIUI and CyanogenMod - but even then, MIUI started to annoy me with little things here and there. I think I'll be sticking with CyanogenMod for awhile. So, I'm not really the best authority on that. Just try some different ones, and see what appeals to you the most

[Q] How to use an install updated ROM

First off let me start by saying I just rooted my EVO 3d. Yes I'm a noob to this whole thing! I have to say I'm hooked on this though very cool! I was successful with the root, I used the HTC method to root the phone.
I then installed TWRP.
I installed the Olympus Trinity XE rom.
Here is my question
I see that there is an update to this rom do I have to reinstall this whole ROM and and set my phone all up again or can I just update with the new version and keep all of the settings on my phone? example: when i installed the new ROM I had to set up my mail and all applications again. Maybe there is a step I'm missing and I may not be providing enough info like I said I'm a noob right now so all help would be appriciated.
Thanks
Most likely you just need to flash the new rom over your current without wiping and starting over. Just be sure to backup first just in case. Usually the thread with the update will say whether you need to wipe or not.
Comcastrated
Direthreat said:
First off let me start by saying I just rooted my EVO 3d. Yes I'm a noob to this whole thing! I have to say I'm hooked on this though very cool! I was successful with the root, I used the HTC method to root the phone.
I then installed TWRP.
I installed the Olympus Trinity XE rom.
Here is my question
I see that there is an update to this rom do I have to reinstall this whole ROM and and set my phone all up again or can I just update with the new version and keep all of the settings on my phone? example: when i installed the new ROM I had to set up my mail and all applications again. Maybe there is a step I'm missing and I may not be providing enough info like I said I'm a noob right now so all help would be appriciated.
Thanks
Click to expand...
Click to collapse
Cetus Corr said:
Most likely you just need to flash the new rom over your current without wiping and starting over. Just be sure to backup first just in case. Usually the thread with the update will say whether you need to wipe or not.
Comcastrated
Click to expand...
Click to collapse
Yea, it really all depends on the ROM dev and the changes they've made between ROMs. They should let you know whether or not you'll need to wipe "data" partition which is where all your settings for mail and all other applciations are stored.
If you don't have to wipe data, usually you don't between updates of the same ROM, then all your settings will stay in tact which makes the updating process much easier.
Many times, when switching between ROMs, you'll need to wipe the data partition and re-do all the settings.
Personally, I usually flash w/o wiping and if I have issues, I might go back and wipe or run fix_permissions script. But these are definitely more advanced steps so I wouldn't recommend the process.
In all cases though, always make a nandroid as it can save much time and effort! Good luck!
Thanks for the assistance.
This is what I'm working with.
Attention!!
Instructions to flash Trinity
For Users that have used Revolutionary to S-Off
ALL USERS
Wipe Data and Cache
Wipe Dalvik Cache
go into Mounts and Storage and Format System
Install Trinity
Sit back and allow it to finish
Once finished allow your Olympian to rest for 7 minutes
REBOOT
Allow it to rest for 7 minutes AGAIN
REBOOT
ENJOY!!!!
Resources to flash Trinity
For Users that have used the HTC Unlock Tool
Please go here and review Second Post for instructions
http://forum.xda-developers.com/show....php?t=1239821
Please go here for Flash Image GUI
http://forum.xda-developers.com/show...1192527&page=8
So my confusion come after the all user statement and it also does not refer to if you are already running the Rom and just looking for the updated parts.
Direthreat said:
Thanks for the assistance.
This is what I'm working with.
Attention!!
Instructions to flash Trinity
For Users that have used Revolutionary to S-Off
ALL USERS
Wipe Data and Cache
Wipe Dalvik Cache
go into Mounts and Storage and Format System
Install Trinity
Sit back and allow it to finish
Once finished allow your Olympian to rest for 7 minutes
REBOOT
Allow it to rest for 7 minutes AGAIN
REBOOT
ENJOY!!!!
Resources to flash Trinity
For Users that have used the HTC Unlock Tool
Please go here and review Second Post for instructions
http://forum.xda-developers.com/show....php?t=1239821
Please go here for Flash Image GUI
http://forum.xda-developers.com/show...1192527&page=8
So my confusion come after the all user statement and it also does not refer to if you are already running the Rom and just looking for the updated parts.
Click to expand...
Click to collapse
On a side note, the links quoted above don't work and for future reference you can attach a link back to the original post you're quoting...not a big deal. But after seeing my app, Flash Image GUI, mentioned, I was a little curious!
The steps look correct and follow the general pattern when loading all ROMs and most kernels. If you're currently using the ROM and you're only flashing an "updated" version of the ROM, then you shouldn't need to wipe /data, at minimum though I'd suggest wiping /data/dalvik-cache and /cache.
BUT, the ultimate answer lies with the ROM developer as only they know for sure, what files were changed and how they were changed. Best to post up the question in the specific ROM thread and I'm sure either the developer or somebody familar with their work will be able to provide a more specific suggestion!
Hope that helps!
Thanks Great feedback! Sorry about the links too. I purchased and used your tool last night and it seemed to update the kernel to AnthraX-CMDA-Sense-Stock v2.6.38.6 but it did not seem to update the ROM? In the developers post he refers to using your method to flash the ROM. I followed your instructions to the T and did it twice but it seems like it did not update the ROM. In addition I can't post to the thread yet because I'm new to XDA and need ten post before I can submit to that thread.
Direthreat said:
Thanks Great feedback! Sorry about the links too. I purchased and used your tool last night and it seemed to update the kernel to AnthraX-CMDA-Sense-Stock v2.6.38.6 but it did not seem to update the ROM? In the developers post he refers to using your method to flash the ROM. I followed your instructions to the T and did it twice but it seems like it did not update the ROM. In addition I can't post to the thread yet because I'm new to XDA and need ten post before I can submit to that thread.
Click to expand...
Click to collapse
My application, Flash Image GUI, only loads the kernel portion of the ROM. Due to limitations of the OS, not able to overwrite files which are currently in use the ROM/System portion of the ROM .zip file can't be loaded while currently using the OS.
The ROM .zip file needs to be flashed from the custom recovery in order to load the system portion of the ROM.
From your feedback it sounds as if you've only completed half of the process, loading the kernel. To complete the other half, you'll need to flash the exact same ROM file from the custom recovery.
Hopefully that makes sense! Appreciate the support!
joeykrim said:
My application, Flash Image GUI, only loads the kernel portion of the ROM. Due to limitations of the OS, not able to overwrite files which are currently in use the ROM/System portion of the ROM .zip file can't be loaded while currently using the OS.
The ROM .zip file needs to be flashed from the custom recovery in order to load the system portion of the ROM.
From your feedback it sounds as if you've only completed half of the process, loading the kernel. To complete the other half, you'll need to flash the exact same ROM file from the custom recovery.
Hopefully that makes sense! Appreciate the support!
Click to expand...
Click to collapse
By that you mean flash the whole rom again?
Sent From My Nocturnal 3Dimension
I did follow the complete process but it still did not update. Looking at going to another Rom.
Any suggestions on Kernel and Rom to use?

A question about rooting (GT-P7510)

​Hello, I'm new to the XDA forums and found about it by discovering MapleSyrup's excellent looking Jelly Bean ROM. I'd like to flash it, but but am inexperienced and have questions.
The first is, is it necessary to root and flash separately, or can I directly put on the rom since I have CWM? And the second is that the most recent CWM recovery I have found is 6.0.1.1, hosted on pershoot's site. Will using that version of the recovery which is from a different source, interfere with rooting/flashing? For future reference, this is my first time doing anything related to rooting, flashing, or custom rom's, so bear with me, please.
​Any help is appreciated. Thank you!
Viruli said:
​Hello, I'm new to the XDA forums and found about it by discovering MapleSyrup's excellent looking Jelly Bean ROM. I'd like to flash it, but but am inexperienced and have questions.
The first is, is it necessary to root and flash separately, or can I directly put on the rom since I have CWM? And the second is that the most recent CWM recovery I have found is 6.0.1.1, hosted on pershoot's site. Will using that version of the recovery which is from a different source, interfere with rooting/flashing? For future reference, this is my first time doing anything related to rooting, flashing, or custom rom's, so bear with me, please.
​Any help is appreciated. Thank you!
Click to expand...
Click to collapse
To flash pershoot's builds, you need to use pershoot's CMR.
Welcome!
I have always worked to root my 2 devices before doing anything else...for experience more than anything. However, if the ROM you're wanting to flash is pre-rooted (and AOSP JB is) it won't matter after the fact. Make sure you do a Nandroid backup before you do anything though so you can get back to stock if you EFF up.
Its always good to use the recommended recovery to flash a ROM if the OP contains such a recommendation. That said 5.5.0.4 works nicely. Make sure you follow wipe instructions to the letter. Have fun!
Thanks!!
Okay, thank you! I flashed it successfully with no problems.
djmatt604 said:
Welcome!
I have always worked to root my 2 devices before doing anything else...for experience more than anything. However, if the ROM you're wanting to flash is pre-rooted (and AOSP JB is) it won't matter after the fact. Make sure you do a Nandroid backup before you do anything though so you can get back to stock if you EFF up.
Its always good to use the recommended recovery to flash a ROM if the OP contains such a recommendation. That said 5.5.0.4 works nicely. Make sure you follow wipe instructions to the letter. Have fun!
Click to expand...
Click to collapse
I flashed CWM 5504 and the root for the first time a few days ago. I was nervous as all get out, but it went fine.
But I didn't do any wipes.
Could you expand on your advice, i.e., what wipes should be done and how, or point me to a guide?
I have the US 7510,, official 404 ICS update.
Thanks in advance!
Upon installation of most roms a wipe data/factory reset is required. This does not wipe the sd card partition. To regain app data use an app called titanium backup from the market. Backup your apps first before wiping. Some roms require you to do more than wipe I.e format system wipe cache or dalvnik cache. This is all done in recovery. The instructions for the install process including wipes will be in the OP (original post) for the rom.
FillTheVoid said:
Upon installation of most roms a wipe data/factory reset is required. This does not wipe the sd card partition. To regain app data use an app called titanium backup from the market. Backup your apps first before wiping. Some roms require you to do more than wipe I.e format system wipe cache or dalvnik cache. This is all done in recovery. The instructions for the install process including wipes will be in the OP (original post) for the rom.
Click to expand...
Click to collapse
Thank you.
I was on the ICS update which I did through Kies. My tab was running perfectly.
I figured it was time to try rooting, so I finally found a guide which was for the official ICS update, not a custom rom.
I flashed CWM 5504, which went fine. I then did the root through CWM, and it also went fine.
As I posted, no wipes, and everything works fine.
Actually, the only reason I want root is to edit one file. It's the one to enable the 5Ghz wifi band.
As for backing up apps, etc., I don't really keep anything on the tab that I worry about losing. About a dozen
photos that I use in Photoshop Touch and a couple of other apps, just for fun.
Music files are on my PC which I can access with ES File Explorer, File Manager HD, and AllShare, all of which
work great. No movies (yet).
I really don't mind reinstalling my apps from the Play Store.
Thanks for your reply!
Sounds like your good to go! The wiping procedures are for when your ready to try a custom ROM. Enjoy your tab
Sent from my GT-P7510 using xda app-developers app
FillTheVoid said:
Sounds like your good to go! The wiping procedures are for when your ready to try a custom ROM. Enjoy your tab
Sent from my GT-P7510 using xda app-developers app
Click to expand...
Click to collapse
Thanks.
Actually I've been enjoying the heck out of it since I bought it in March.
Went to buy a Kindle Fire for my wife, thought she might have some fun with it.
Browsed the other tabs and got her the GT 10.1 instead.
After setting it up for her, I could see it would be fun, so the next day I bought
another one for me. Glad I did; we both have a lot of fun with them.
Thanks again for your help.
Custom ROMs are awesome. Wink wink.
If you like stock there are lots of close-to-stock ROMs out there. Task650 is one of those devs for example I would recommend who releases a solid stock experience but without all the factory bloat, pre rooted, etc. Have a look around - you're embarking on a fun (and very addictive) journey!
djmatt604 said:
Custom ROMs are awesome. Wink wink.
If you like stock there are lots of close-to-stock ROMs out there. Task650 is one of those devs for example I would recommend who releases a solid stock experience but without all the factory bloat, pre rooted, etc. Have a look around - you're embarking on a fun (and very addictive) journey!
Click to expand...
Click to collapse
Thanks dj.

ROM for New SGII owner

Hi to all,
I'm moving from a Motorola Atrix 4G to this phone (due on Monday)
After having a good read through the forums I'm still a bit confused with some things.
1-I'm looking to install a stable custom ROM with a good battery life.
I've noticed that there are 3 development sections for this phone.
Which forum do I need to concentrate on or with which ROM or kernel to achieve the above ?
2-On the Atrix you have to do both the regular wipe in CWM and Fasboot wipe via command prompt to achieve a clean install (which should remove any leftover files from previous install). I notice that for the SGII you only do the wipe options in CWM.
Is this enough wipe for this phone?
3- Is the use of ODIN to install a ROM preferable to other methods?
Thanks.
SLIM BEAN
bluegrass55 said:
Hi to all,
2-On the Atrix you have to do both the regular wipe in CWM and Fasboot wipe via command prompt to achieve a clean install (which should remove any leftover files from previous install). I notice that for the SGII you only do the wipe options in CWM.
Is this enough wipe for this phone?
3- Is the use of ODIN to install a ROM preferable to other methods?
Thanks.
Click to expand...
Click to collapse
2- well you can ROM nuke script prior to flashing a new ROM but it is not required.
3- ODIN is recommeded only for flashing stock roms or kernels. CWM flash-able is prefered method.
1) Try them for yourself. There is no best rom.
Sent from the Matrix
Thanks guys for the replies.
Can't wait to for it's arrival.
Hopefully this phone is a better build quality than the Atrix.
You're up for some fun.
Pick whichever ROM has the most buzz words.
Here you have some extra steps to take with your new SGS2! For sure you know about them but just in case..
Backup your EFS folder after you got root. That would save you from future headache if your IMEI would go drunk and raped after having too many roms and kernels.
You can backup with EFS Pro or HC kTool.
Check if your SGS2 have the insane chip with this, eMMC Brickbug Check. Then you gotta be extra careful.
ephraim033 said:
The ones causing the bricks mate is the stock kernel from sammy's 4.0.4 rom with CWM. Wiping using stock recovery is okay (i tried it). If you use other kernel like siyah you will be safe. In short, Stock kernel from samsung's 4.0.4 update + CWM Recovery + Wipe = Hard brick. As long as you avoid that, you will be safe
Click to expand...
Click to collapse
[HOW-TO] Proper method to flash a ROM by RushAOZ. No need for wipe scripts.
Slim roms are stable and good in my opinion but don't take my word for it, check 'em all out!
It's best to read stickies http://forum.xda-developers.com/showthread.php?p=25164221
Sent from my Nexus 7 using xda premium
Thread closed as its a best ROM thread.

flashing new rom for my phone with s_on and unlocked bootloader

So I'm very new to android as I came from an iPhone.
I want to flash the liquid Smooth Rom. I'm currently on the viper one Rom that I side loaded when I flashed a bad kernal. I just want tips so I don't soft brick my phone again. Thanks
NM
I can't really help you with your issue but I may be able to get some help from you. please check my post.
http://forum.xda-developers.com/att-htc-one-m8/help/rooted-phone-stuck-boot-screen-plz-halp-t2886980
Tarantulaboy337 said:
So I'm very new to android as I came from an iPhone.
I want to flash the liquid Smooth Rom. I'm currently on the viper one Rom that I side loaded when I flashed a bad kernal. I just want tips so I don't soft brick my phone again. Thanks
Click to expand...
Click to collapse
1) Read read read until you understand the basic concepts of what you are doing, potential pitfalls, how to recover, etc.
2) Read the ROM thread for the one you picked for any potential issues. Read the install instructions on the top post of that ROM thread, etc.
3) I don't know what you mean by "bad kernel" but (going along with Items 1 and 2 above) understand what you are flashing. Only flash mods known to work with this device, don't mismatch kernels with the ROM (try to use a AOSP kernel on a Sense ROM or vice versa), etc.
4) Have adb/fastboot installed and understand how to use them. You know how to sideload, so it seems you already have this one done pretty well.
5) For the love of god, make a nandroid backup of your current setup using your preferred custom recovery (TWRP or CWM). This alone will get you out of most "soft brick" jams; so I have no idea why some many folks skip this step!!!
6) Full wipe (data, cache and Dalvik) when flashing a new ROM. This is the default wipe if using TWRP. Neglecting to do this is a common mistake, and doing so can save some headaches.
7) Some folks have had random issues flashing with TWRP. Be prepared to re-flash TWRP (wipe cache first) or switch to Philz CWM if this happens to you.
8) Consider S-off, as it gives you more recovery options if you run into problems.
9) That's really about it. If you have these items covered, you are pretty well equipped to recover from any issues flashing ROMs. But most likely, if you do a full wipe and just install the ROM, it will boot fine.

Categories

Resources