Related
Hello, im new to androids and rooting, and i own a galaxy s2 which i have just rooted with Chainfires CF-root which also installed Clockwork mod recovery. I have a couple of questions on how to install custom roms, for example if i would like to flash villainrom, what are the exact steps i need to take? I have read as much as possible but im not sure if the same applies to custom roms in general.
So far im thinking i have to put the custom rom on my phones sd card and then flash it via clickwork mod, however i have read something about doing a nandroid backup and data wipe bdfore flashing the rom. Ideally i would hope somebody can do a quick step by step guide explaining the above, and tell me weather this applies to custom roms in general?
Im very grateful for any help, thx in advance
Once you have rooted your phone make sure you have enabled usb debugging.
Go to settings, applications, development, enable usb debugging.
Then connect phone to pc, and transfer rom.
Then boot into recovery mode, to do this switch phone off, then press vol up, home and power.
Then wipe data, wipe cache, go to advanced and wipe dalvik cache.
Then go to install zip from sd card, select zip, click ok and cwm will take care of the rest
Thx so much for the breakdown of how to do this, will this cause me to loose all data?
Baz-L said:
Thx so much for the breakdown of how to do this, will this cause me to loose all data?
Click to expand...
Click to collapse
Yes you will lose all data.
It's worth doing a backup, you can use titanium backup.
Download it from the market.
I don't tend to back things up, as contacts etc are synced and backed up with my google account.
And I just redownload my apps.
You'll find some roms don't wipe data, but it's generally advisable to always wipe before flashing any rom, and therefore backup if you have a lot of data.
JGS2 said:
Yes you will lose all data.
It's worth doing a backup, you can use titanium backup.
Download it from the market.
I don't tend to back things up, as contacts etc are synced and backed up with my google account.
And I just redownload my apps.
You'll find some roms don't wipe data, but it's generally advisable to always wipe before flashing any rom, and therefore backup if you have a lot of data.
Click to expand...
Click to collapse
Ok so its basicaly that same process when flashing any custom rom? just needed it step by step, thx for the tip on titanium bu, and thx again for ur help, much appreciated;-)
Baz-L said:
Ok so its basicaly that same process when flashing any custom rom? just needed it step by step, thx for the tip on titanium bu, and thx again for ur help, much appreciated;-)
Click to expand...
Click to collapse
Yeah pretty much the same for every rom.
It's always worth reading the first post in every thread though, as I came across a rom recently that could only be flashed using odin, I think it was litening rom.
But if not 99% of custom roms can be done the way I described
And I know what you mean about needing things step by step, these forums seem very complicated at first, the best advice I can give you is to read read read.
When I first joined earlier this month everything seemed so complicated but it's fairly straight forward when you get used to it.
I now flash about ten times a day, but I have a problem lol
JGS2 said:
Yeah pretty much the same for every rom.
It's always worth reading the first post in every thread though, as I came across a rom recently that could only be flashed using odin, I think it was litening rom.
But if not 99% of custom roms can be done the way I described
And I know what you mean about needing things step by step, these forums seem very complicated at first, the best advice I can give you is to read read read.
When I first joined earlier this month everything seemed so complicated but it's fairly straight forward when you get used to it.
I now flash about ten times a day, but I have a problem lol
Click to expand...
Click to collapse
Sorry for the delayed reply, lol jeez 10 times a day, i get how it can be so fun and addictive though, trying custom roms and themes etc.
As i said though im new to android, came from an iphone 4 which i always used to jailbreak.
And yeah i know what you mean, im doing my best to read as much as i can, but here on xda things move so fast and theres that many different things to learn it gets scary hehe.
Im still to try and flash a rom, i was going to try villainrom first, but do you have any other suggestions on which devs/roms i should check out, seeing as all this is new i might aswell get some practice in....
I do have another quick question, when i connect my fone via usb, which folder do i put the zip rom file into, is it External SD?
Anyways thanks again for your help, really appreciated!
EDIT* got it sorted!
Yeah ten times a day isn't an exaggeration either lol
I find what happens is I flash a rom, then a dev releases an update for another rom then I flash that, then I flash a different modem, then I find another rom, then another update and the cycle continues
You said you sorted it, but the rom zip file just goes in the root of your internal memory.
It's not overly important as you can find the file through cwm anyway.
As sometimes I'll download a rom through my browser and then it goes to the downloads folder.
But if I download it on my pc, I will just transfer the file to the root of my internal memory on my phone.
JGS2 said:
Yeah ten times a day isn't an exaggeration either lol
I find what happens is I flash a rom, then a dev releases an update for another rom then I flash that, then I flash a different modem, then I find another rom, then another update and the cycle continues
You said you sorted it, but the rom zip file just goes in the root of your internal memory.
It's not overly important as you can find the file through cwm anyway.
As sometimes I'll download a rom through my browser and then it goes to the downloads folder.
But if I download it on my pc, I will just transfer the file to the root of my internal memory on my phone.
Click to expand...
Click to collapse
Yeah thanks again i managed to get it sorted i guess i overthink things sometimes, but i followed your guide above and now im running villainrom
had to do a bit more reading/asking on the backup/restore front, knowing what the diff between nandroid/titanium is etc, and how and which to use to restore.
Also you mentioned above about backing up your contacts with google, i tried to do that but couldnt seem to, how did you manage it? as i cant restore contacts from my windows pc via kies right? now that im rooted with a custom rom.
Anyways thx again for the help pal, you've been awesome!
Okay. Couple days ago, i got my new Samsung Galaxy S II. Fell in love with it. I previously had a Vibrant, but that met an unfortunate and violent demise. On the vibrant I hadn't been doing anything involving roms and such because i'd tried once, and completely fried the phone. LOL.
I managed to root my phone, and from what I've read, I didn't do the best method. What I did was get an unsecure kernel, and flashed that, then used a 1-click root type thing to root it. So one of my questions is, my clockwork mod isn't working, what's wrong with it? I downloaded ROM Manager, and flashed CWM. But when i reboot into recovery, i get the stock Samsung recovery screen. How can I get this to work?
And another question, is about roms such as Cyanogen mod. I really wanna get it. (I wont until I get CWM working, though.) And I'm just wondering. If I were to just go to ROM Manager, and flash cyanogen, would it work, or do i need to do more to my phone to be able to put on custom roms? I've never understood the concept of roms vs kernels vs firmware vs whatever else.
And if it matters, Samsung Galaxy S II, Android 2.3.3, rooted using SuperOneClick.
P.S Anything else that I should considering doing/putting onto my phone? And thanks in advance for halping.
Gutana said:
Okay. Couple days ago, i got my new Samsung Galaxy S II. Fell in love with it. I previously had a Vibrant, but that met an unfortunate and violent demise. On the vibrant I hadn't been doing anything involving roms and such because i'd tried once, and completely fried the phone. LOL.
I managed to root my phone, and from what I've read, I didn't do the best method. What I did was get an unsecure kernel, and flashed that, then used a 1-click root type thing to root it. So one of my questions is, my clockwork mod isn't working, what's wrong with it? I downloaded ROM Manager, and flashed CWM. But when i reboot into recovery, i get the stock Samsung recovery screen. How can I get this to work?
And another question, is about roms such as Cyanogen mod. I really wanna get it. (I wont until I get CWM working, though.) And I'm just wondering. If I were to just go to ROM Manager, and flash cyanogen, would it work, or do i need to do more to my phone to be able to put on custom roms? I've never understood the concept of roms vs kernels vs firmware vs whatever else.
And if it matters, Samsung Galaxy S II, Android 2.3.3, rooted using SuperOneClick.
P.S Anything else that I should considering doing/putting onto my phone? And thanks in advance for halping.
Click to expand...
Click to collapse
Okay, don't take this the wrong way, but it seems you're a bit lacking regarding knowledge about this phone... It'd pay to do your research beforehand in the SGS2 forum, read the FAQs, etc.
Okay, first off, all I can say is, go back to stock. Go flash a stock Samsung ROM for the device. Then, go into Chainfire's CF-Root Kernel thread, and download the appropriate kernel, and flash it using ODIN. After you've done that, you'll have ClockworkMod, and you'll be rooted. It is recommended that you flash another kernel though, after gaining root, as all the CF-Root kernel does it install ClockworkMod, and root the device. Personally, I recommend SiyahKernel.
If you need more detail or have any more questions, feel free to send me a PM.
Thanks,
screamworks.
screamworks said:
Okay, don't take this the wrong way, but it seems you're a bit lacking regarding knowledge about this phone... It'd pay to do your research beforehand in the SGS2 forum, read the FAQs, etc.
Okay, first off, all I can say is, go back to stock. Go flash a stock Samsung ROM for the device. Then, go into Chainfire's CF-Root Kernel thread, and download the appropriate kernel, and flash it using ODIN. After you've done that, you'll have ClockworkMod, and you'll be rooted. It is recommended that you flash another kernel though, after gaining root, as all the CF-Root kernel does it install ClockworkMod, and root the device. Personally, I recommend SiyahKernel.
If you need more detail or have any more questions, feel free to send me a PM.
Thanks,
screamworks.
Click to expand...
Click to collapse
Alright, I did what you said. I went to stock 2.3.4, used CF-root. And now about SiyahKernel, what are the advantages of it? And is there something wrong with just staying with the CF-Root kernel?
And as of where I am now, with just root and CWM, would i be able to switch ROMs and such?
Gutana said:
Alright, I did what you said. I went to stock 2.3.4, used CF-root. And now about SiyahKernel, what are the advantages of it? And is there something wrong with just staying with the CF-Root kernel?
And as of where I am now, with just root and CWM, would i be able to switch ROMs and such?
Click to expand...
Click to collapse
With a rooted device you'll be able to flash trough Odin or CMW recovery any rom you like.
Siyah kernel gives you a faster and more battery efficient phone and lets you set your own Voltage/ speed the processor has to use see this for the latest info
http://www.gokhanmoral.com/ and
http://forum.xda-developers.com/showthread.php?t=1263838
DirkTeur Velserbroncx said:
With a rooted device you'll be able to flash trough Odin or CMW recovery any rom you like.
Siyah kernel gives you a faster and more battery efficient phone and lets you set your own Voltage/ speed the processor has to use see this for the latest info
http://www.gokhanmoral.com/ and
http://forum.xda-developers.com/showthread.php?t=1263838
Click to expand...
Click to collapse
Alright, so i'm pretty much ready to go? Yayayayay.
And would you recommend any roms for me? XD
Gutana said:
Alright, I did what you said. I went to stock 2.3.4, used CF-root. And now about SiyahKernel, what are the advantages of it? And is there something wrong with just staying with the CF-Root kernel?
And as of where I am now, with just root and CWM, would i be able to switch ROMs and such?
Click to expand...
Click to collapse
SiyahKernel has a lot of advantages and improvements of CF-Root, which provides null, if I'm correct. Go check out the SiyahKernel thread in Original Development for details.
Yes, as stated, you can use CWM by itself to switch ROMs. Just remember that if you're switching ROMs (as opposed to performing a flash to a newer version of the same ROM), to perform a factor reset / wipe data, wipe cache, and wipe Dalvik cache (Advanced > wipe Dalvik cache) in ClockworkMod first.
Gutana said:
Alright, so i'm pretty much ready to go? Yayayayay.
And would you recommend any roms for me? XD
Click to expand...
Click to collapse
For a beginninger, I can't recommend MIUI highly enough. You could go with GalnetMIUI, which is a variant, but I personally prefer the official MIUI build. If you're looking for a more, 'pure' experience, go with CyanogenMod 7.1 stable.
screamworks said:
SiyahKernel has a lot of advantages and improvements of CF-Root, which provides null, if I'm correct. Go check out the SiyahKernel thread in Original Development for details.
Yes, as stated, you can use CWM by itself to switch ROMs. Just remember that if you're switching ROMs (as opposed to performing a flash to a newer version of the same ROM), to perform a factor reset / wipe data, wipe cache, and wipe Dalvik cache (Advanced > wipe Dalvik cache) in ClockworkMod first.
For a beginninger, I can't recommend MIUI highly enough. You could go with GalnetMIUI, which is a variant, but I personally prefer the official MIUI build. If you're looking for a more, 'pure' experience, go with CyanogenMod 7.1 stable.
Click to expand...
Click to collapse
Alright, one more question, sorry for the nooby-ness. Haha.
So going from my phone to for example Cyanogen, I'd backup in CWM, and Titanium backup (Or does CWM backup like, EVERYTHING?) and then factory reset, flash the rom using odin, and then use titanium backup to get my apps and settings back? orwhat.
Gutana said:
Alright, one more question, sorry for the nooby-ness. Haha.
So going from my phone to for example Cyanogen, I'd backup in CWM, and Titanium backup (Or does CWM backup like, EVERYTHING?) and then factory reset, flash the rom using odin, and then use titanium backup to get my apps and settings back? orwhat.
Click to expand...
Click to collapse
CWM backup (called a NANDroid backup), backs up everything. If you perform a NANDroid back, there's no need to perform a backup in Titanium Backup - it creates a full image of your system (the advantage to TB though, is that you can backup all your download apps and settings, then install the new ROM, and restore the backed up apps - If you restore a NANDdroid backup, it'll restore the old ROM, exactly as it was when the backup was made).
So yes, the installation process is, for CWM: copy the ROM.zip to your phone, then boot into CWM recovery. Hit the 'factory reset / wipe data' option, the 'wipe cache' option, and then go to Advanced, and hit the 'wipe Dalvik cache' option. After that, choose 'install ZIP from SDCARD', and choose your ROM.zip. After it finishes installing, just hit 'reboot system now', and you're good to go!
Usually, it's not required to use ODIN to flash a new ROM, unless there's a problem with the recovery.
All that said, it pays to read the thread for the ROM beforehand, as sometimes when moving from ROM to ROM (especially from stock), there's a few small things that may be required, like flashing the ROM twice, or whatever
screamworks said:
CWM backup (called a NANDroid backup), backs up everything. If you perform a NANDroid back, there's no need to perform a backup in Titanium Backup - it creates a full image of your system (the advantage to TB though, is that you can backup all your download apps and settings, then install the new ROM, and restore the backed up apps - If you restore a NANDdroid backup, it'll restore the old ROM, exactly as it was when the backup was made).
So yes, the installation process is, for CWM: copy the ROM.zip to your phone, then boot into CWM recovery. Hit the 'factory reset / wipe data' option, the 'wipe cache' option, and then go to Advanced, and hit the 'wipe Dalvik cache' option. After that, choose 'install ZIP from SDCARD', and choose your ROM.zip. After it finishes installing, just hit 'reboot system now', and you're good to go!
Usually, it's not required to use ODIN to flash a new ROM, unless there's a problem with the recovery.
All that said, it pays to read the thread for the ROM beforehand, as sometimes when moving from ROM to ROM (especially from stock), there's a few small things that may be required, like flashing the ROM twice, or whatever
Click to expand...
Click to collapse
Alright, i got that done. I've tried both MIUI and Cyanogen, and both are working and lookin wonderful. But the problem is I dont get data on either one. I've tried reflashing, rebooting, factory reset. Idunno what else to try. Do you know what could be causing this?
Gutana said:
Alright, i got that done. I've tried both MIUI and Cyanogen, and both are working and lookin wonderful. But the problem is I dont get data on either one. I've tried reflashing, rebooting, factory reset. Idunno what else to try. Do you know what could be causing this?
Click to expand...
Click to collapse
Check your APN settings (should be somewhere in Settings under mobile network or whatever). Look your's up online ('APN settings carrier y, country z), and if they're not correct, add them in.
screamworks said:
Check your APN settings (should be somewhere in Settings under mobile network or whatever). Look your's up online ('APN settings carrier y, country z), and if they're not correct, add them in.
Click to expand...
Click to collapse
Got everything working, thank you very much. Thanked every one of your posts
And I've asked too many questions for one person in one thread, I happen to have one more. How can I get the Android Market on Cyanogenmod? I downloaded build 115, and there wasn't a market, so i'll be using MIUI till I get that fixed. ><
Gutana said:
Got everything working, thank you very much. Thanked every one of your posts
And I've asked too many questions for one person in one thread, I happen to have one more. How can I get the Android Market on Cyanogenmod? I downloaded build 115, and there wasn't a market, so i'll be using MIUI till I get that fixed. ><
Click to expand...
Click to collapse
You're more than welcome
If you've got any other questions, feel free to PM me
With CyanogenMod, there's a bit of a story to it, but basically, they're not allowed to package Market, Gmail, Maps, etc. with the ROM, so you need to download a zip file called Gapps and flash it in CWM Recovery, you can find it here. You don't need to wipe anything when flashing this.
Also, build #115 isn't the latest, build #117 is (in fact, there's another, even more current one, but there's really nothing to it), but I don't believe there's any major changes.
screamworks said:
You're more than welcome
If you've got any other questions, feel free to PM me
With CyanogenMod, there's a bit of a story to it, but basically, they're not allowed to package Market, Gmail, Maps, etc. with the ROM, so you need to download a zip file called Gapps and flash it in CWM Recovery, you can find it here. You don't need to wipe anything when flashing this.
Also, build #115 isn't the latest, build #117 is (in fact, there's another, even more current one, but there's really nothing to it), but I don't believe there's any major changes.
Click to expand...
Click to collapse
Hey, I was having troubles messaging you, since it didn't show anything in the sent box, i assumed it didnt go through. So i guess ill be still asking you on here.
So about Cyanogen, which build is the best? And if i'm going from one build to another, like from 115, to 116, would i still have to do a complete wipe? And any other roms besides MIUI and Cyanogen you recommend? cause MIUI is giving me and couldn't generate md5 errors, and i cant restore to it, and i hate starting off without it set up how i like it. D: and yeah, thanks.
Gutana said:
Hey, I was having troubles messaging you, since it didn't show anything in the sent box, i assumed it didnt go through. So i guess ill be still asking you on here.
So about Cyanogen, which build is the best? And if i'm going from one build to another, like from 115, to 116, would i still have to do a complete wipe? And any other roms besides MIUI and Cyanogen you recommend? cause MIUI is giving me and couldn't generate md5 errors, and i cant restore to it, and i hate starting off without it set up how i like it. D: and yeah, thanks.
Click to expand...
Click to collapse
I only just the message 12 hours ago, if that helps?
Usually, your best bet is to go with the latest build, which you can get here. If it's stability you're looking for, go with the stable build, instead of nightlies.
Personally, out of all ROMs I've tried, I could only ever stand MIUI and CyanogenMod - but even then, MIUI started to annoy me with little things here and there. I think I'll be sticking with CyanogenMod for awhile. So, I'm not really the best authority on that. Just try some different ones, and see what appeals to you the most
First off let me start by saying I just rooted my EVO 3d. Yes I'm a noob to this whole thing! I have to say I'm hooked on this though very cool! I was successful with the root, I used the HTC method to root the phone.
I then installed TWRP.
I installed the Olympus Trinity XE rom.
Here is my question
I see that there is an update to this rom do I have to reinstall this whole ROM and and set my phone all up again or can I just update with the new version and keep all of the settings on my phone? example: when i installed the new ROM I had to set up my mail and all applications again. Maybe there is a step I'm missing and I may not be providing enough info like I said I'm a noob right now so all help would be appriciated.
Thanks
Most likely you just need to flash the new rom over your current without wiping and starting over. Just be sure to backup first just in case. Usually the thread with the update will say whether you need to wipe or not.
Comcastrated
Direthreat said:
First off let me start by saying I just rooted my EVO 3d. Yes I'm a noob to this whole thing! I have to say I'm hooked on this though very cool! I was successful with the root, I used the HTC method to root the phone.
I then installed TWRP.
I installed the Olympus Trinity XE rom.
Here is my question
I see that there is an update to this rom do I have to reinstall this whole ROM and and set my phone all up again or can I just update with the new version and keep all of the settings on my phone? example: when i installed the new ROM I had to set up my mail and all applications again. Maybe there is a step I'm missing and I may not be providing enough info like I said I'm a noob right now so all help would be appriciated.
Thanks
Click to expand...
Click to collapse
Cetus Corr said:
Most likely you just need to flash the new rom over your current without wiping and starting over. Just be sure to backup first just in case. Usually the thread with the update will say whether you need to wipe or not.
Comcastrated
Click to expand...
Click to collapse
Yea, it really all depends on the ROM dev and the changes they've made between ROMs. They should let you know whether or not you'll need to wipe "data" partition which is where all your settings for mail and all other applciations are stored.
If you don't have to wipe data, usually you don't between updates of the same ROM, then all your settings will stay in tact which makes the updating process much easier.
Many times, when switching between ROMs, you'll need to wipe the data partition and re-do all the settings.
Personally, I usually flash w/o wiping and if I have issues, I might go back and wipe or run fix_permissions script. But these are definitely more advanced steps so I wouldn't recommend the process.
In all cases though, always make a nandroid as it can save much time and effort! Good luck!
Thanks for the assistance.
This is what I'm working with.
Attention!!
Instructions to flash Trinity
For Users that have used Revolutionary to S-Off
ALL USERS
Wipe Data and Cache
Wipe Dalvik Cache
go into Mounts and Storage and Format System
Install Trinity
Sit back and allow it to finish
Once finished allow your Olympian to rest for 7 minutes
REBOOT
Allow it to rest for 7 minutes AGAIN
REBOOT
ENJOY!!!!
Resources to flash Trinity
For Users that have used the HTC Unlock Tool
Please go here and review Second Post for instructions
http://forum.xda-developers.com/show....php?t=1239821
Please go here for Flash Image GUI
http://forum.xda-developers.com/show...1192527&page=8
So my confusion come after the all user statement and it also does not refer to if you are already running the Rom and just looking for the updated parts.
Direthreat said:
Thanks for the assistance.
This is what I'm working with.
Attention!!
Instructions to flash Trinity
For Users that have used Revolutionary to S-Off
ALL USERS
Wipe Data and Cache
Wipe Dalvik Cache
go into Mounts and Storage and Format System
Install Trinity
Sit back and allow it to finish
Once finished allow your Olympian to rest for 7 minutes
REBOOT
Allow it to rest for 7 minutes AGAIN
REBOOT
ENJOY!!!!
Resources to flash Trinity
For Users that have used the HTC Unlock Tool
Please go here and review Second Post for instructions
http://forum.xda-developers.com/show....php?t=1239821
Please go here for Flash Image GUI
http://forum.xda-developers.com/show...1192527&page=8
So my confusion come after the all user statement and it also does not refer to if you are already running the Rom and just looking for the updated parts.
Click to expand...
Click to collapse
On a side note, the links quoted above don't work and for future reference you can attach a link back to the original post you're quoting...not a big deal. But after seeing my app, Flash Image GUI, mentioned, I was a little curious!
The steps look correct and follow the general pattern when loading all ROMs and most kernels. If you're currently using the ROM and you're only flashing an "updated" version of the ROM, then you shouldn't need to wipe /data, at minimum though I'd suggest wiping /data/dalvik-cache and /cache.
BUT, the ultimate answer lies with the ROM developer as only they know for sure, what files were changed and how they were changed. Best to post up the question in the specific ROM thread and I'm sure either the developer or somebody familar with their work will be able to provide a more specific suggestion!
Hope that helps!
Thanks Great feedback! Sorry about the links too. I purchased and used your tool last night and it seemed to update the kernel to AnthraX-CMDA-Sense-Stock v2.6.38.6 but it did not seem to update the ROM? In the developers post he refers to using your method to flash the ROM. I followed your instructions to the T and did it twice but it seems like it did not update the ROM. In addition I can't post to the thread yet because I'm new to XDA and need ten post before I can submit to that thread.
Direthreat said:
Thanks Great feedback! Sorry about the links too. I purchased and used your tool last night and it seemed to update the kernel to AnthraX-CMDA-Sense-Stock v2.6.38.6 but it did not seem to update the ROM? In the developers post he refers to using your method to flash the ROM. I followed your instructions to the T and did it twice but it seems like it did not update the ROM. In addition I can't post to the thread yet because I'm new to XDA and need ten post before I can submit to that thread.
Click to expand...
Click to collapse
My application, Flash Image GUI, only loads the kernel portion of the ROM. Due to limitations of the OS, not able to overwrite files which are currently in use the ROM/System portion of the ROM .zip file can't be loaded while currently using the OS.
The ROM .zip file needs to be flashed from the custom recovery in order to load the system portion of the ROM.
From your feedback it sounds as if you've only completed half of the process, loading the kernel. To complete the other half, you'll need to flash the exact same ROM file from the custom recovery.
Hopefully that makes sense! Appreciate the support!
joeykrim said:
My application, Flash Image GUI, only loads the kernel portion of the ROM. Due to limitations of the OS, not able to overwrite files which are currently in use the ROM/System portion of the ROM .zip file can't be loaded while currently using the OS.
The ROM .zip file needs to be flashed from the custom recovery in order to load the system portion of the ROM.
From your feedback it sounds as if you've only completed half of the process, loading the kernel. To complete the other half, you'll need to flash the exact same ROM file from the custom recovery.
Hopefully that makes sense! Appreciate the support!
Click to expand...
Click to collapse
By that you mean flash the whole rom again?
Sent From My Nocturnal 3Dimension
I did follow the complete process but it still did not update. Looking at going to another Rom.
Any suggestions on Kernel and Rom to use?
Hi,
I have been using my Asus Prime for several months now without problems. I bought it from another user in May where he had installed a custom rom which I didn't like. After several days of reading I managed to revert to an Asus rom with a build number 9.4.2.21. However now that there is a new firmware for WW version, whenever I try to update, its says I have the latest update!! My Prime is still unlocked if this plays any role.
Any ideas?
If you need any further information please ask.
Thank you
Yannis
Do you know if your prime is rooted? If it is, just install Goomanager from the Play store and have it flash the TWRP Recovery. After that, you should be free to flash whatever Prime ROMs you want, just as long as you follow the instructions in the developers' threads. Personally, I would recommend AndroWook, as it is extremely stable and fast. If you're more adventurous, and willing to put up with some loss of functionality, there are a few pre-release Jelly Bean ROMs floating around as well.
ZebTheCalvinist said:
Do you know if your prime is rooted? If it is, just install Goomanager from the Play store and have it flash the TWRP Recovery. After that, you should be free to flash whatever Prime ROMs you want, just as long as you follow the instructions in the developers' threads. Personally, I would recommend AndroWook, as it is extremely stable and fast. If you're more adventurous, and willing to put up with some loss of functionality, there are a few pre-release Jelly Bean ROMs floating around as well.
Click to expand...
Click to collapse
Thank you for the quick reply!
It must be rooted, since I remember using CWM in order to fix it. I also found a goomanager folder in root dire However is there any way to verify that it is rooted? I like to have my Asus as close to stock rom as possible. On the other hand I wouldnt mind any speed increase... I found so far the following 9.4.2.28 roms:
http://www.virtuousrom.com/p/prime.html
http://odjdubhd.forumer.com/7-5-12-prime-w-sense-appeal-1-0-stock-9-4-2-28-tweaked-t2267679.html
Would you still suggest the AndroWook?
yannis1976 said:
Thank you for the quick reply!
It must be rooted, since I remember using CWM in order to fix it. I also found a goomanager folder in root dire However is there any way to verify that it is rooted? I like to have my Asus as close to stock rom as possible. On the other hand I wouldnt mind any speed increase... I found so far the following 9.4.2.28 roms:
http://www.virtuousrom.com/p/prime.html
http://odjdubhd.forumer.com/7-5-12-prime-w-sense-appeal-1-0-stock-9-4-2-28-tweaked-t2267679.html
Would you still suggest the AndroWook?
Click to expand...
Click to collapse
Actually.....
1. Root your device
2. Unlock your device to install custom roms
3. Install CWM or TWM recovery
4. Read/research custom rom threads on Prime Dev section to see how to install each Custom Rom
shinzz said:
Actually.....
1. Root your device
2. Unlock your device to install custom roms
3. Install CWM or TWM recovery
4. Read/research custom rom threads on Prime Dev section to see how to install each Custom Rom
Click to expand...
Click to collapse
As I said before, the device is unlocked and had the CWM installed.
However why not use the goomanager which seems more easy?
yannis1976 said:
As I said before, the device is unlocked and had the CWM installed.
However why not use the goomanager which seems more easy?
Click to expand...
Click to collapse
I would recommend using TWRP. It's a bit easier to use and seems to be more reliable than CWM.
As for the ROMs, I would still recommend AndroWook. I used Virtuous, and it's very solid, but AW is just a lot smoother and more optimized. It is a stock-based ROM as well, but there are a few more tweaks that improve the overall performance.
ZebTheCalvinist said:
Do you know if your prime is rooted? If it is, just install Goomanager from the Play store and have it flash the TWRP Recovery. After that, you should be free to flash whatever Prime ROMs you want, just as long as you follow the instructions in the developers' threads. Personally, I would recommend AndroWook, as it is extremely stable and fast. If you're more adventurous, and willing to put up with some loss of functionality, there are a few pre-release Jelly Bean ROMs floating around as well.
Click to expand...
Click to collapse
Just installed the Goomanager and found several roms in the internal sd:
Nightly
rc
aAKP
Euroskank
TeamBroccoli
Teameos
Teamgummy
Shall I erase them all?
yannis1976 said:
Just installed the Goomanager and found several roms in the internal sd:
Nightly
rc
aAKP
Euroskank
TeamBroccoli
Teameos
Teamgummy
Shall I erase them all?
Click to expand...
Click to collapse
Those are not actually downloaded; they are ROMs that you have the option of downloading through Goomanager. You don't need to worry about deleting them. As for installing TWRP, I don't actually remember what it is that you do to get it. If you go in the Development subforum here, you can find the TWRP thread with instructions on how to install it through GM. From there, you just need to download the ROM file of your choice, do all the necessary wipes, and flash away.
ZebTheCalvinist said:
I would recommend using TWRP. It's a bit easier to use and seems to be more reliable than CWM.
As for the ROMs, I would still recommend AndroWook. I used Virtuous, and it's very solid, but AW is just a lot smoother and more optimized. It is a stock-based ROM as well, but there are a few more tweaks that improve the overall performance.
Click to expand...
Click to collapse
TWRP doesn't list Transformer Prime as a supported device. Should I use it anyway?
yannis1976 said:
TWRP doesn't list Transformer Prime as a supported device. Should I use it anyway?
Click to expand...
Click to collapse
In the upper right hand corner is the drop-down menu. On that menu, tap on "Install Open Recovery Script." That will install TWRP.
ok, I installed the TWRP and waiting for AndroWook to be downloaded...
My only concern now is whether this is the best rom..
yannis1976 said:
ok, I installed the TWRP and waiting for AndroWook to be downloaded...
My only concern now is whether this is the best rom..
Click to expand...
Click to collapse
It's the best one I've used. Just make sure to do all your wipes, and you'll be good to go. If you don't like it, you can always do a backup and flash Virtuous.
By the way, if you're flashing a lot of ROMs (or even one ROM) you'll want Titanium Backup Pro. It's well worth the $6 it costs in the market to be able to do batch restores of apps with all their data intact.
I just unlocked mine today and I'm not sure where to go from here. Do I need an SD card? And when I reboot the Prime and see "This device is unlocked" in the top corner I press up and all I get is a black screen similar to sleep of death where you have to hold down the power for like 20 seconds to get a response. What's the deal with this?
Sent from my Inspire 4G using Tapatalk 2
jmikeb92 said:
I just unlocked mine today and I'm not sure where to go from here. Do I need an SD card? And when I reboot the Prime and see "This device is unlocked" in the top corner I press up and all I get is a black screen similar to sleep of death where you have to hold down the power for like 20 seconds to get a response. What's the deal with this?
Sent from my Inspire 4G using Tapatalk 2
Click to expand...
Click to collapse
In the Dev section, there's a stickied thread with videos on how to do all of this. Please go and watch them.
You need to know, that since you've unlocked your prime, you've completely VOIDED ALL WARRANTY. I only say that because if you're asking what to do, then you're very much a noob and maybe you should have read more before you started screwing around.
Now that's done.
The first thing I recommend doing is rooting your device. You need a PC to do it.
Use this method to root: http://forum.xda-developers.com/showthread.php?t=1706588
Once you've rooted your device, go to the Google Play Store and install GooManager, it is free.
In goo manager, you want to go into the menu, and click Install OpenRecoveryScript. That will install TWRP, which will allow you to install other ROMs and will change that 'black screen' you mentioned into something useful.
Again, please go watch those videos. I recommend installing Andrwook first, it's a modified version of stock and works great. Also, be sure to go through the NVFLASH thread and do that when you feel comfortable with a more dangerous mod that can save your ass down the line.
Hi again,
Androwook installed just fine. First i wiped the cache and delvik cache and then just flashed the rom. I did it twice since i also tested the minimum and typical installations of Androowook. However i am impressed that all my docs are there and so is my game progress. Is there something i should but didn't wipe?
ZebTheCalvinist said:
It's the best one I've used. Just make sure to do all your wipes, and you'll be good to go. If you don't like it, you can always do a backup and flash Virtuous.
By the way, if you're flashing a lot of ROMs (or even one ROM) you'll want Titanium Backup Pro. It's well worth the $6 it costs in the market to be able to do batch restores of apps with all their data intact.
Click to expand...
Click to collapse
By the way i backed up the previous rom with twrp. Is that ok?
Well, if you're not experiencing problems, you're probably fine, but it is strongly recommended that you do a factory reset before flashing a new ROM.
Sent from my SCH-i500 using xda app-developers app
Yeah I'm no stranger to Root just on this device. I finally got it into cwm but now when I try to back up I get an error. I have goo manager on my inspire but it always recovers using cwm do you think it will do a better job?
Sent from my Inspire 4G using Tapatalk 2
jmikeb92 said:
Yeah I'm no stranger to Root just on this device. I finally got it into cwm but now when I try to back up I get an error. I have goo manager on my inspire but it always recovers using cwm do you think it will do a better job?
Sent from my Inspire 4G using Tapatalk 2
Click to expand...
Click to collapse
Use goomanger to install TWRP. CWM is not fully compatible with the Prime at the moment for some reason, and you'll have issues.
Hello everyone,
Well might as well say hi. I'm Ryukouki. I use this handle on a lot of forums, so if this is familiar you most likely know me elsewhere. So, anywho! I purchased a VZW Samsung Galaxy S4 two weeks ago, and I'm really curious. I rooted my phone, installed Clockwork Mod and backed up my data (I THINK) and I'm looking into ROMs for the Galaxy S4. What is the best mod for speed and performance, with good ease of use, and does not require a data wipe on installation? And is there a tutorial to go about doing this? I'm kind of new to the whole smartphone thing (used a feature phone for seven years!!), but I'm not too afraid to try new things out.
Ryukouki said:
Hello everyone,
Well might as well say hi. I'm Ryukouki. I use this handle on a lot of forums, so if this is familiar you most likely know me elsewhere. So, anywho! I purchased a VZW Samsung Galaxy S4 two weeks ago, and I'm really curious. I rooted my phone, installed Clockwork Mod and backed up my data (I THINK) and I'm looking into ROMs for the Galaxy S4. What is the best mod for speed and performance, with good ease of use, and does not require a data wipe on installation? And is there a tutorial to go about doing this? I'm kind of new to the whole smartphone thing (used a feature phone for seven years!!), but I'm not too afraid to try new things out.
Click to expand...
Click to collapse
No ROMs 'require' a data wipe per se. You may, however, run into problems with any ROM if you don't completely wipe data when installing (especially the first time you go from stock to a ROM).
Why are you so afraid of wiping data? You could very easily download a few backup apps and have everything back up and running in 20 minutes.
trebb said:
No ROMs 'require' a data wipe per se. You may, however, run into problems with any ROM if you don't completely wipe data when installing (especially the first time you go from stock to a ROM).
Why are you so afraid of wiping data? You could very easily download a few backup apps and have everything back up and running in 20 minutes.
Click to expand...
Click to collapse
I assume that this requires backup to my SD card though? And can you explain how I go about doing this? Do I just pick up things like App Restore and Backup (I think it's the other way around...) and then backup and restore? I don't want to screw this up, because I have a few apps where I've dumped a couple hundred dollars into and if I delete it or wipe it, I lose all the data, and I for sure as hell don't wanna do that!
You are rooted, so grab Titanium Backup, and use it. Just don't backup up system data. App data is fine (at least it always has been on AT&T).
I haven't seen a ROM yet that is stable enough to flash, IMHO. Give it a couple of weeks. I ran AOKP on my GS2 for a long time, and am looking forward to it here.
Sent from my SCH-I545 using xda premium
If I was you man , I wouldnt never install a rom without a full wipe. That will keep you from running into problems. I know that from experience. Like Sbreen say, no wipe , no gripe
DroidHead214 said:
If I was you man , I wouldnt never install a rom without a full wipe. That will keep you from running into problems. I know that from experience. Like Sbreen say, no wipe , no gripe
Click to expand...
Click to collapse
Very well then, I guess a wipe it is.
Now, let me get this straight. I rooted my phone. I have TWRP Custom Recovery on my phone, and I have backed up the thing in the recovery menu to my micro SD card. I also Titanium Backup'd my system with apps and whatnot. So when I decide to flash my phone to a new ROM, I'd first wipe the data, factory reset, and wipe the dalvik cache, then flash it, do the setup garbage, and then from there, redownload Titanium Backup and restore whatever I want to restore, correct?
Ryukouki said:
Very well then, I guess a wipe it is.
Now, let me get this straight. I rooted my phone. I have TWRP Custom Recovery on my phone, and I have backed up the thing in the recovery menu to my micro SD card. I also Titanium Backup'd my system with apps and whatnot. So when I decide to flash my phone to a new ROM, I'd first wipe the data, factory reset, and wipe the dalvik cache, then flash it, do the setup garbage, and then from there, redownload Titanium Backup and restore whatever I want to restore, correct?
Click to expand...
Click to collapse
You got it! However the "factory reset" option in TWRP actually wipes data/cache/dalvik, I believe. (It tells you at the top of the screen what its going to wipe) Once you got your new rom you're all set to start restoring your apps with TB and enjoy the smoothness. After the setup process when your phone goes to the home screen, it's a good idea to let it sit for 5 to 10 minutes. (some developers advise this)
whiskerz said:
You got it! However, the "factory reset" option in TWRP actually wipes data/cache/dalvik I believe. (It tells you at the top of the screen what its going to wipe) Once you got your new rom you're all set to start restoring your apps with TB and enjoying the smoothness
Click to expand...
Click to collapse
I'll try it either tomorrow...or, later in the week if my courage decides to run away. Now, in the worst case scenario, let's say I completely screw up and get stuck with a bootloop or, I just completely hate the ROM itself. To restore to my current configuration do I just go back to TWRP and hit restore, and it basically reverts itself? I'm so sorry if I'm asking really stupid questions, I just REALLY want to do it right, and not have any hassles whatsoever. I am extremely careful and I really want to feel comfortable doing this.
Some guides I see mentioned backing up the IMEI information on the phone. Do I really need to do that, or is that all automated and I shouldn't run into issues? And is there a GApps.zip file thingy that I need to download for the "stock" applications? But wait a second, TB should take care of all of that correct?
Ryukouki said:
I'll try it either tomorrow...or, later in the week if my courage decides to run away. Now, in the worst case scenario, let's say I completely screw up and get stuck with a bootloop or, I just completely hate the ROM itself. To restore to my current configuration do I just go back to TWRP and hit restore, and it basically reverts itself? I'm so sorry if I'm asking really stupid questions, I just REALLY want to do it right, and not have any hassles whatsoever. I am extremely careful and I really want to feel comfortable doing this.
Some guides I see mentioned backing up the IMEI information on the phone. Do I really need to do that, or is that all automated and I shouldn't run into issues? And is there a GApps.zip file thingy that I need to download for the "stock" applications? But wait a second, TB should take care of all of that correct?
Click to expand...
Click to collapse
Yes, if your phone goes into a bootloop or you absolutely hate the rom, then pull the battery and boot into recovery. (If you just hate the rom no need to pull battery just power off)Make sure you have a backup of your system created within TWRP with the "backup" option. If you have a backup in TWRP you would just hit the "Restore" button and find your system backup and wait for it to restore. I've never heard anything about backing up IMEI info, you will probably not run into any issues. I've flashed tons and tons of roms on numerous devices and have NEVER had to do any of that. Gapps (google apps) are ONLY needed when you're going to run an AOSP rom. That means when the rom doesn't have the touchwiz skin over top of it. AOSP roms are pure vanilla android and have zero touchwiz features. You can find the touchwiz based roms in the "Android development" section while the AOSP roms are found in the "Original development" section. Also, it's fine to ask questions. That's how you learn!
whiskerz said:
Yes, if your phone goes into a bootloop or you absolutely hate the rom, then pull the battery and boot into recovery. (If you just hate the rom no need to pull battery just power off)Make sure you have a backup of your system created within TWRP with the "backup" option. If you have a backup in TWRP you would just hit the "Restore" button and find your system backup and wait for it to restore. I've never heard anything about backing up IMEI info, you will probably not run into any issues. I've flashed tons and tons of roms on numerous devices and have NEVER had to do any of that. Gapps (google apps) are ONLY needed when you're going to run an AOSP rom. That means when the rom doesn't have the touchwiz skin over top of it. AOSP roms are pure vanilla android and have zero touchwiz features. You can find the touchwiz based roms in the "Android development" section while the AOSP roms are found in the "Original development" section. Also, it's fine to ask questions. That's how you learn!
Click to expand...
Click to collapse
Awesome. Phew, I was like what why do I need to backup my IMEI information? I'm planning on installing Hyperdrive, is that a touchwiz based rom by any chance? And hah, yeah I know, I usually have really meticulous instructions for myself when I flash video game consoles, so I know the routine like the back of my hand.
Ryukouki said:
Awesome. Phew, I was like what why do I need to backup my IMEI information? I'm planning on installing Hyperdrive, is that a touchwiz based rom by any chance? And hah, yeah I know, I usually have really meticulous instructions for myself when I flash video game consoles, so I know the routine like the back of my hand.
Click to expand...
Click to collapse
Yes, Hyperdrive is a touchwiz based rom! The file is going to be a little over a 1gig, and already includes all of the apps you'll need.(Don't flash Gaaps) I'm heading off XDA for the night if you have anymore questions/concerns feel free to PM me and I'll try to help
whiskerz said:
Yes, Hyperdrive is a touchwiz based rom! The file is going to be a little over a 1gig, and already includes all of the apps you'll need.(Don't flash Gaaps) I'm heading off XDA for the night if you have anymore questions/concerns feel free to PM me and I'll try to help
Click to expand...
Click to collapse
Oh good! And at least my internet is reasonable now, so 1GB shouldn't be too bad. ;D I should head off too, its a bit late over here. Thanks for your help, you've answered a lot of my concerns!
Please read forum rules before posting
Questions and help issues go in Q&A and help section
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator
All ROMs are the best and data wipes are always recommended