Related
I'm not sure if this is a soft brick, full brick, or not bricked at all..not getting flashing red light or anything, but i am getting stuck at the white ATT boot screen
I'm not a dev. I was only trying to set my phone up wth root, Adeo ROM and Gingerbread theme but then ran into connectivity issues when i was trying to flash GB to it that i think had something to do with ADB not staying in \Sbin
- see this thread
Now i just did a factory reset and i am stuck in bootloader. Since i'm not familiar and don't want to brick it from here (if it's not already) some knowledgeable help would be GREATLY appreciated as to what do next i'm just a bit nervous to play at this point
UPDATE: I just noticed when i turn my phone landscape i get half (the right half) of the MOtolur login screen...half stays white ATT....weird
Thanks
i am no pro here, but try holding the vol down on boot from battery pull.. then factory reset from menus and delete cache.. then i am pretty sure you will boot fine...
the issue is your cache if i am not mistaken.
I have no idea what i did, but for now i am booting up again!
I tried to select what i thought was Factory Reset from Fast Boot menu. It didn't actually ever boot up from that. but after another battery pull it rebooted normally...very happy to see that!
For now everything looks good...now hopefully my ADB issue is going to be resolved with new driver installations and the flash...
u posted in the wrong froum but this is what u should do
http://forum.xda-developers.com/showthread.php?t=991595
and this is what u do if u brick
http://forum.xda-developers.com/showthread.php?t=991072
I appreciate the reply, and i appologize for posting in the wrong forum
i tried to flash that ROM but it doesn't install...believe it or not i am having a bigger issue than the previous...my phone is not being recognized through the USB bc for some reason ADB keeps getting deleted. Even if i manually add it it still does not allow me to flash anything, the phone acts as though not recgonized, but it is recognized through normal user USB functions..
Again, this is the thread related to that
and despite what the Title reads i assure you it does not seem fixed by anyone who has posted in that forum except one person
Dillsnik said:
I appreciate the reply, and i appologize for posting in the wrong forum
i tried to flash that ROM but it doesn't install...believe it or not i am having a bigger issue than the previous...my phone is not being recognized through the USB bc for some reason ADB keeps getting deleted. Even if i manually add it it still does not allow me to flash anything, the phone acts as though not recgonized, but it is recognized through normal user USB functions..
Again, this is the thread related to that
and despite what the Title reads i assure you it does not seem fixed by anyone who has posted in that forum except one person
Click to expand...
Click to collapse
man if im not mistaken, you can just flash the sbf file with
RSD lite even with offline adb.
trying that now actually...got hung the first time..going again now
Thanks
uhm, mate do you have the proper drivers installed?
yes, except for the adb issue
UPDATE - the SBF flash WORKED! hallelujah! lol
Moved as not android development
Hello, I just bought my G-tablet and I have severely screwed it over. First, I rooted it and installed CWM, (It went fine). Then I flashed Cyanogen 7, following their wiki full update instructions. It was running fine till I found out that for some reason, my computer nor the tablet even knew it had an SD (Computer found nothing, File explorer on tablet had nothing) coupled with the fact Gapps refused to install, I figured this would be solved in a wipe then another flash. Nothing was different. So I wiped again (seemed to have froze during) but the flash of Vegan 5.1 seemed to have went well... for now. However, trying to install Adobe Flash via the preinstalled android market, it wouldn't install. It kept saying download unsuccessful, for every single app I tried. (no it's not an network problem). Being the noob I am I started following random googled XDA threads on how to fix this. I partioned 4gig from my sd to see if that would fix the market problem. I got stuck in a bootloop so I was forced to reflash vegan. When I did, I found out that when I tried to install anything it said something along the lines of "Not enough space" knowing I had 13 gigs of memory leftover, I figured I'd try rebooting. Got stuck in bootloop. Then followed yet ANOTHER googled guide (droidpirate brick fix) and now I can't even access CWM. It just loads as IF it were going to CWM but then shows me a /!\ caution sign then instantly turns off. When I normally start it, it goes into bootloop. when I try to get to CWM (holding volume up, power) it goes to a useless flash that I presume just fails, then brings me back into the bootloop. As far as I see, I have no way of fixing this...
I know this is so much to read, so in a brief explanation.. I'm in a bootloop, cannot get into CWM (brings me to a failed flash then back into boot loop) and am in dire need of assistance Please help me
Go read the posts on nvflash and learn how to use it. It is your friend!!
IndyLateNite said:
Go read the posts on nvflash and learn how to use it. It is your friend!!
Click to expand...
Click to collapse
NvFlash is currently not working for me, I don't know exactly where I messed up but my computer already has the drivers to read the tablet. when I run the .bat, it doesn't seem to do anything.
Scratch that, got it to work. I didn't extract one of the folders entirely. But my tablet is still stuck in bootloop even after this? what now?
IndyLateNite said:
Go read the posts on nvflash and learn how to use it. It is your friend!!
Click to expand...
Click to collapse
Take this with a grain of salt, as I learned it is not 'always' your friend
Now it's just on the stock Viewsonic birds and Gtablet logo bootloop...
Even after I NvFlashed it... Still can't access CMW.
Any suggestions?
Nvm, I got it to what appears to be working. (and I just about jizzed all over my tab.) Thanks so much. Saved me a beating from my parents.
I've tried to look for this problem and haven't found anything similar. If it's already been addressed please direct me to the previous thread, if this is in the wrong place please move it.
I rooted my Galaxy S II a while ago and it's been working great. I wanted to try Cyanogen mod 7 and so I followed the instructions on their website. Trying to use ROM manager gave me a weird error message telling me that there was an invalid signature or something, despite toggling everything and wiping the cache to turn it off. So I followed the "method via recovery" instructions. I did everything exactly as it is there, including the Google apps stuff, and it all seemed to work perfectly. Then I rebooted it hoping for it to boot into CM7, and instead, when it turns on it goes to the screen saying Samsung Galaxy S II with the yellow triangle underneath, and stays there. Every time it turn it on it goes to that screen and doesn't change. It's now been like that for half an hour. I can start it up into download mode, and I've tried flashing zImage to it again, but no change.
I have a NANDroid backup (it's backed up with CWM anyway), and I've copied the backup to my computer, but I have no idea how to apply it when the bloody thing won't turn on.
I'm using Linux with Heimdall (the cross-platform Odin clone).
Please help me. Unfortunately I have no internet in my flat so I won't be able to see any advice until tomorrow unless it;s given in the next ten minutes. God I really hope the thing's ok.
Hi
Do you have jigg? ( if you don't have it buy it from ebay or ask some friend of you )
With jigg you can enter download mode and then flash the stock rom.
Pull battery, wait 10s, then boot while holding power+vol-up+home. This should get you in recovery. Then restore nandroid.
Sent from my Transformer TF101 using xda premium
TheGhost1233 said:
Pull battery, wait 10s, then boot while holding power+vol-up+home. This should get you in recovery. Then restore nandroid.
Click to expand...
Click to collapse
I can't believe it was this simple, I knew power+vol-down+home got tme to downloading but I didn't know that got me into recovery. Everything's recovered now.
Thank you Dutch people!
Verizon Galaxy Tab 10.1 4G LTE (sch-i905)
So I got this tablet from a friend who said it was bricked, said I could have it if I got it working. So I plug it in and it turns on no problem, strange. wiped tablet and added a couple apps. Got busy at work and the tablet drain power. That's when I got to see it bricked, but still not sure why it booted for a bit for me.
Symptoms:
Boots to Samsung Galaxy Tab 10.1 splash screen (not the animated one after), sits there for ever.
Boots to Odin update mode
When booting to recovery I get a blank, back lit screen and nothing ever.
I've tried:
-Pushing clockwork mode to fix recovery
-I've had a hell of a time finding stock firmware for some reason (it isn't on sammobile), but I did find one eventually. I pushed it to the tablet via Odin, and it was successful, but rebooted to blank black back-lit screen. Have to hard boot and hold power buttun until I see the splash screen to get that far. I followed the guide on rootzwiki reposted on icsforums - www icsforums com/forum/showthread / 13525 (sorry new member can't post links)
-Followed another guide that involved draining battery completely, no go.
I don't care what firmware I end up on, or if I can use LTE (I won't anyway)
I'm a network engineer so I'm tech savy, but not heavy on Android OS. I'm looking for anything else I can try. I saw another method involving heimdall suite, but can't find the files for my model.
Any help or guidance is greatly appreciated.
@Juicebox4242
I had this problem on my gt-p7510...
What I ended up doing was wiping my sdcard..I must have had something corrupt in my file system or a kernel issue( still not sure which )..
Since you have no recovery..I think you can use odin to repartition ( I CAN NOT STRESS ENOUGH THAT THIS IS JUST A GUESS )..I have not tried it..but i will search after this post to confirm..I also believe there is a way using ADB..again not sure..
I just wanted to post this so you would know somebody was looking and to maybe give you a couple ideas to follow up on...I'll search around and see what I find
Edit...I believe ADB will only work with usb debugging checked...But you can flash a stock rom in odin with re-partition checked..you need a .pit file....I think...
Edit...Here is a link to a stock rom thread for you're device..It seems to have helped a couple people with their soft-bricked devices..just follow directions in OP..no repartition checked. I cant even find a .pit file to do a re-partition with for you're device..
http://forum.xda-developers.com/showthread.php?t=1342995 Let me know if this works for you..
Thanks for the post!! Really appreciate it.
That firmware is the one I found in the end and tried. Odin pushes it ok, but then still doesn't boot. In fact after pushing that firmware it boots to backlit blank screen, but when hard reset boots to splash screen.
I tried a pit file I found that I thought was the right one, but it failed when I used that so it must have been wrong.
Juicebox4242 said:
Thanks for the post!! Really appreciate it.
That firmware is the one I found in the end and tried. Odin pushes it ok, but then still doesn't boot. In fact after pushing that firmware it boots to backlit blank screen, but when hard reset boots to splash screen.
I tried a pit file I found that I thought was the right one, but it failed when I used that so it must have been wrong.
Click to expand...
Click to collapse
I have the exact same problem as you, except sometimes I can't my tablet to boot. I know it is a software problem because before I was messing with recovery yesterday, everything was working just fine. All I wanted to do was restore to factory settings and instead ended up bricking the device... If you find / know the answer, please do share.
Juicebox4242 said:
Verizon Galaxy Tab 10.1 4G LTE (sch-i905)
So I got this tablet from a friend who said it was bricked, said I could have it if I got it working. So I plug it in and it turns on no problem, strange. wiped tablet and added a couple apps. Got busy at work and the tablet drain power. That's when I got to see it bricked, but still not sure why it booted for a bit for me.
Symptoms:
Boots to Samsung Galaxy Tab 10.1 splash screen (not the animated one after), sits there for ever.
Boots to Odin update mode
When booting to recovery I get a blank, back lit screen and nothing ever.
I've tried:
-Pushing clockwork mode to fix recovery
-I've had a hell of a time finding stock firmware for some reason (it isn't on sammobile), but I did find one eventually. I pushed it to the tablet via Odin, and it was successful, but rebooted to blank black back-lit screen. Have to hard boot and hold power buttun until I see the splash screen to get that far. I followed the guide on rootzwiki reposted on icsforums - www icsforums com/forum/showthread / 13525 (sorry new member can't post links)
-Followed another guide that involved draining battery completely, no go.
I don't care what firmware I end up on, or if I can use LTE (I won't anyway)
I'm a network engineer so I'm tech savy, but not heavy on Android OS. I'm looking for anything else I can try. I saw another method involving heimdall suite, but can't find the files for my model.
Any help or guidance is greatly appreciated.
Click to expand...
Click to collapse
Did you ever get this fixed? I've had the same problem for months. I just gave up and put it away. I recently fixed a Galaxy Tab 2 and now I want to see if anyone else was able to fix this i905 not booting issue.
did anyone know the solution of this question
Hi,
I recently unlocked and rooted my device. Asus Transformer Prime (TF201).
I tried to boot it into recovery, wouldn't boot the rom, kept freezing, hard reset it. Then it booted into the official android version, I was running 4.1.1, build # 10.4.2.18
Then I went into recovery, and I was like "oh yeah, I remember reading that it has to be a fresh install, that way there's no incompatibility". So I decided to press the down button until I got to erase everything in the menu, I did it. Erased it, device reset itself, and now it's stuck in the main loading screen, where it says Asus, this device is unlocked in the top left, and the nvidia symbol in the bottom right. The device wont boot into anything, not even recovery settings. Is there a fix? Or did I just make my tablet a paper weight?
I tried searching the web, I found all these articles, and frankly I'm very overwhelmed, and didn't know what to do or which one to read. I just got the tablet as a Valentines Day gift from my wife, and I would have to have ruined it. Please help me.
EDIT: I got my device to appear as "APX" in devices and printers, it's an unknown device. But I'm still lost.
Hi
Thanks for writing to us at XDA Assist. Please standby while we have your thread/question moved to the appropriate sub-forum for your device.
For future reference you can find your device sub-forum here (bookmark/subscribe this):
Asus Eee Pad Transformer Prime
Within that section you will find a dedicated q&a sub-forum (this is where your thread is going to be moved to):
Eee Pad Transformer Prime Q&A, Help & Troubleshooting
Good luck!
Bump, could really use some help...
GiordyWarner said:
Bump, could really use some help...
Click to expand...
Click to collapse
There is only hope, if you can manage to get into bootloader screen by pressing power + vol down.
APX mode would only help you, if you had pulled your nvflash files.
GiordyWarner said:
Hi,
I recently unlocked and rooted my device. Asus Transformer Prime (TF201).
I tried to boot it into recovery, wouldn't boot the rom, kept freezing, hard reset it. Then it booted into the official android version, I was running 4.1.1, build # 10.4.2.18
Then I went into recovery, and I was like "oh yeah, I remember reading that it has to be a fresh install, that way there's no incompatibility". So I decided to press the down button until I got to erase everything in the menu, I did it. Erased it, device reset itself, and now it's stuck in the main loading screen, where it says Asus, this device is unlocked in the top left, and the nvidia symbol in the bottom right. The device wont boot into anything, not even recovery settings. Is there a fix? Or did I just make my tablet a paper weight?
I tried searching the web, I found all these articles, and frankly I'm very overwhelmed, and didn't know what to do or which one to read. I just got the tablet as a Valentines Day gift from my wife, and I would have to have ruined it. Please help me.
EDIT: I got my device to appear as "APX" in devices and printers, it's an unknown device. But I'm still lost.
Click to expand...
Click to collapse
Hi, u can follow the steps listed in this blog. I just installed CM11 using the same steps over the weekend. U need to perform a factory reset and wipe the cache after u installed the ROM using the CWM recovery. If not, it will be struck in the boot screen with the arrow going in circle. Below is the blog address:
d3-media.blogspot.sg/2014/08/upgrading-asus-prime-tf201-to-android.html
Good luck flashing!!
gsanglan said:
Hi, u can follow the steps listed in this blog. I just installed CM11 using the same steps over the weekend. U need to perform a factory reset and wipe the cache after u installed the ROM using the CWM recovery. If not, it will be struck in the boot screen with the arrow going in circle. Below is the blog address:
d3-media.blogspot.sg/2014/08/upgrading-asus-prime-tf201-to-android.html
Good luck flashing!!
Click to expand...
Click to collapse
This has nothing to do with what he is asking.
flumpster said:
This has nothing to do with what he is asking.
Click to expand...
Click to collapse
Hi,
I've same problem!
I tried to flash to android 5.0. I tried many things via twrp and now, thats it:
My TF201 stucks also at bootscreen and the recovery menu (Power on + Vol.Down) won't work. That means I'm not able to get in fastboot mode or something like that. The only possiblity to switch the device off at the moment is to unplug the battery
I've searched for a solution in many boards, but unitl now i haven't found anything.
At the moment it seems that the only possibility we have, is to change mainboard, or to try to connect via an external programmer (for flashing the memory), but that would be for sure not the easiest way, or it could be also nearly impossible.
So at the moment I'm praying to god, that someone will have another solution and will post it here, because otherwise I can cast away my loved transformer prime :crying:
Looking forward to hear any news about that topic :fingers-crossed:
Jimboy00 said:
Hi,
I've same problem!
I tried to flash to android 5.0. I tried many things via twrp and now, thats it:
My TF201 stucks also at bootscreen and the recovery menu (Power on + Vol.Down) won't work. That means I'm not able to get in fastboot mode or something like that. The only possiblity to switch the device off at the moment is to unplug the battery
I've searched for a solution in many boards, but unitl now i haven't found anything.
At the moment it seems that the only possibility we have, is to change mainboard, or to try to connect via an external programmer (for flashing the memory), but that would be for sure not the easiest way, or it could be also nearly impossible.
So at the moment I'm praying to god, that someone will have another solution and will post it here, because otherwise I can cast away my loved transformer prime :crying:
Looking forward to hear any news about that topic :fingers-crossed:
Click to expand...
Click to collapse
You say this "My TF201 stucks also at bootscreen and the recovery menu". Does that mean you can still access recovery (TWRP)?
flumpster said:
You say this "My TF201 stucks also at bootscreen and the recovery menu". Does that mean you can still access recovery (TWRP)?
Click to expand...
Click to collapse
No, thats the problem, since yesterday it is not possible, because I tried to flash back to an older version of TWRP, and since that I can't access RCK and then I tried to wipe data, and since that, I even can't access to recovery console (Power on + Vol.Down).
That means I can't do anything at the moment, I see only the asus boot logo and that's it.
So I have no idea to communicate with the tablet at the moment.
The problem was, that I was not really careful, because my opinion was, that it's impossible to brick the whole tablet, but now it's gone!
Is that the end of the story, or do you know therefore a solution?
Regards,
Jim
Seems that you are in APX mode. Hope you have your blob + nvflash and wheelie to restore the bricksafe.img. (It saved my TF when i was in your position)
Good luck
Jimboy00 said:
No, thats the problem, since yesterday it is not possible, because I tried to flash back to an older version of TWRP, and since that I can't access RCK and then I tried to wipe data, and since that, I even can't access to recovery console (Power on + Vol.Down).
That means I can't do anything at the moment, I see only the asus boot logo and that's it.
So I have no idea to communicate with the tablet at the moment.
The problem was, that I was not really careful, because my opinion was, that it's impossible to brick the whole tablet, but now it's gone!
Is that the end of the story, or do you know therefore a solution?
Regards,
Jim
Click to expand...
Click to collapse
Unfortunately unless you have nvflash backups then you will have to get the board replaced. Forget contacting Asus as they would charge you more than the tablet is worth. Try and find one with a smashed screen on ebay etc cheap that still works that you can swap the board out from.
lemicp said:
Seems that you are in APX mode. Hope you have your blob + nvflash and wheelie to restore the bricksafe.img. (It saved my TF when i was in your position)
Good luck
Click to expand...
Click to collapse
Thanks for your feedback,
So I don't have these files :crying:
I found also another thread with same story, and it seems that I can search for a new MoBo....
http://forum.xda-developers.com/showthread.php?t=2143942
...or buy a new tablet, maybe the better solution...