I'm not sure if this is a soft brick, full brick, or not bricked at all..not getting flashing red light or anything, but i am getting stuck at the white ATT boot screen
I'm not a dev. I was only trying to set my phone up wth root, Adeo ROM and Gingerbread theme but then ran into connectivity issues when i was trying to flash GB to it that i think had something to do with ADB not staying in \Sbin
- see this thread
Now i just did a factory reset and i am stuck in bootloader. Since i'm not familiar and don't want to brick it from here (if it's not already) some knowledgeable help would be GREATLY appreciated as to what do next i'm just a bit nervous to play at this point
UPDATE: I just noticed when i turn my phone landscape i get half (the right half) of the MOtolur login screen...half stays white ATT....weird
Thanks
i am no pro here, but try holding the vol down on boot from battery pull.. then factory reset from menus and delete cache.. then i am pretty sure you will boot fine...
the issue is your cache if i am not mistaken.
I have no idea what i did, but for now i am booting up again!
I tried to select what i thought was Factory Reset from Fast Boot menu. It didn't actually ever boot up from that. but after another battery pull it rebooted normally...very happy to see that!
For now everything looks good...now hopefully my ADB issue is going to be resolved with new driver installations and the flash...
u posted in the wrong froum but this is what u should do
http://forum.xda-developers.com/showthread.php?t=991595
and this is what u do if u brick
http://forum.xda-developers.com/showthread.php?t=991072
I appreciate the reply, and i appologize for posting in the wrong forum
i tried to flash that ROM but it doesn't install...believe it or not i am having a bigger issue than the previous...my phone is not being recognized through the USB bc for some reason ADB keeps getting deleted. Even if i manually add it it still does not allow me to flash anything, the phone acts as though not recgonized, but it is recognized through normal user USB functions..
Again, this is the thread related to that
and despite what the Title reads i assure you it does not seem fixed by anyone who has posted in that forum except one person
Dillsnik said:
I appreciate the reply, and i appologize for posting in the wrong forum
i tried to flash that ROM but it doesn't install...believe it or not i am having a bigger issue than the previous...my phone is not being recognized through the USB bc for some reason ADB keeps getting deleted. Even if i manually add it it still does not allow me to flash anything, the phone acts as though not recgonized, but it is recognized through normal user USB functions..
Again, this is the thread related to that
and despite what the Title reads i assure you it does not seem fixed by anyone who has posted in that forum except one person
Click to expand...
Click to collapse
man if im not mistaken, you can just flash the sbf file with
RSD lite even with offline adb.
trying that now actually...got hung the first time..going again now
Thanks
uhm, mate do you have the proper drivers installed?
yes, except for the adb issue
UPDATE - the SBF flash WORKED! hallelujah! lol
Moved as not android development
Related
Im going to lose my mind! I've searched and read and found no real answer..... Is there anyway that I can get my phone out of the boot screen?
Ive downloaded and rooted before and never had a prblm! I download this certain Rom Lastnight and all of a sudden my phone is stuck on the boot screen! I've tried everything i can with it and no luck. Does anyone have some type of info on what i can do or is there no hope for my poor lil droid?
Please let me know!
Thanx in advance!
Have you tried a battery pull? Pop that out and back in, reboot into recovery and restore your nandroid back up. Should be fine from there...
What I do when this happens to me is pull the battery, wipe my phone, re-apply the rom, then reboot.
-If that does not work, then revert back to your nand backup.
Thanks for the ideas but I tried both of those actions first and got nothing in return. This sukks! I even tried to go back and load the PB00img zip tha i had and no go. I'm guessing that i Bricked this dam Phone!
Back to the Blackberry! Damn!
Do you think its possible that i can load a new Rom and try to boot the phone into recovery and flash that zip? The problem seems to be my boot screen! I've seen post with people with similar "situations" <--------lol (not From Jersey shore) and tried those methods and once again nothing.
Sucks that you are still having this issue. The next step I can think of would be if you have SDK set up then once it is stuck on the boot screen, run a logcat and post it here so someone that is smarter than I can figure out where you are running into problems at. You'll need to navigate to your SDK/tools folder (in the Command window of course...) and then once there just type in: adb logcat .
This will result in a myriad of crazy computer language stuff. Should be able to tell us something at least.
First, take a deep breath; your phone is not bricked. Far from it in fact.
Second, prove to yourself that it isn't bricked by booting it into the custom recovery:
Power it off, and then hold down Vol-Up (first) and the End (second); keep pressing both buttons until the three skating droids have appeared. The custom recovery menu should pop up about 10-12 seconds after that.
Third, download "some other certain ROM" (I get to be as vague as you are, right?) to your PC, and get it to the root folder of your SD card somehow. Look up "USB-MS toggle Amon_RA" if you don't already know what that is.
Fourth, flash that "some other certain ROM" and prove to yourself that your phone is not bricked, making sure that you perform a "Wipe data/factory reset" first before you flash the ROM.
Then, after you've shown yourself how it is possible to do these steps, go back and try to figure out why the other "certain ROM" doesn't work on it's first boot. Try popping out the SD card before you boot it to see if that is the trouble.
bftb0
@es0tericcha0s, Thanks for the response but instead of doing more harm to the phone i just took it to VZW, (Kinda) Explained what happen and they switched it out no prob.
@bftb0 lol Be as Vague as possible.... I didn't want to say any particular Rom for the simple fact that who ever did the Rom i'm sure worked hard at it, And evevn tho i'm not new at this, it could very possibly be my mistake somewhere in installing it! SO I choose to respect the XDA and The Dev But thanks for your awesome response! (no Sarcasm intended) lol
Hey all,
I did my searching for the last several hours, and am feeling pretty weak. I know there are several other posts with this error - but please let me explain my situation.
Phone was running 2.3.6. I am unsure how it was originally unlocked (carrier unlocked) and bought it used. To my knowledge it did not have root access... (though the advert said it did - running SU in Terminal to show if it had access failed)
I tried doing a factory reset on the phone because it kept acting weird. Just rebooting 10 times a day, and wifi not working either.
Since the reset the phone has not made it past the M Dual Core screen.
Edit as I type: As I type this, I FINALLY got into recovery mode. It took a long time... is that normal? I mean.. loongggg. Now i see other posts state I just need to click the bottom right corner above the search key and I should be on the way to recovering the device...
This however is not working...
I will keep the phone plugged in over night and see if it just needed more time I suppose. Can you guys recommend anything?
I am on win7 - should have the device drivers installed (though, Windows doesn't seem to recognize this with a notification bubble). I know the phone was not on USB Debug Mode when I clicked 'factory reset'.. would it have retained this?
I will update as i have more information.. otherwise if I am missing something please let me know.
Thanks again,
-k
Try booting into recovery mode by holding volume down while turning on. When the menu appears keep pressing volume down until it says android recovery and then press volume up to select it. If an android Guy with a warning sign shows up, press volume down and up. A menu should appear soon. Try to do a data wipe and factory reset from there.
Sent from my MB860 using XDA App
Hi ar31791, thank you for the reply.
That worked to put me into a recovery mode - very nice. Is the button combo different depending on the version of android your'e running, or just phone dependent? I appreciate that.
Couple follow up questions if you guys don't mind and can help
- after the factory reset - my boot time is incredibly slow.... like 30 minutes to boot kinda thing. I tried to factory reset several times since, and its the same issue.
- my data is not working on the phone. I used the apn suggestions from all sites I've found, rebooted (took a while) tried data roaming, etc, but it just doesn't work. I have a decent idea that the apn's are correct because the mms apn worked fine with a test picture message.
My main concern is the incredible lengthy boot time and the data no longer working. The issue with wifi still showing 'error' when enabling it was not resolved by the reset (I didn't think it would - I was reading other posts where it is suspected as a hardware issue).
Thanks again for the reads, and replies. I appreciate the help!
-kenny
You need romracers or cwm. Unless yer going to stay stock.
Sent from my MB860 using xda premium
Is this an att or a rogers/international phone? Best bet would be to flash pudding and than cwm + custom roms
hey again- thank you for the replies.. seriously. much appreciated.
phalanx, i dont mind staying stock but would that not allow the data connection to work correctly? i found a few posts based on the romracer. i lack the hands on experience, but it looks like i just need to follow the steps for an adb push and then install eh?
you mention staying stock, is that an option? info on my setup below
crnkoj, i am running a bell phone on a fido network in canada. bought on ebay pre unlocked. i do not bekieve it is rooted. phone, mms and text work fine, it seems to be a problem finding a data network at this moment.
thanks again guys, ill be taking a look into the tutorials for romracer and cwm, and giver a shot. lemme know if you have any further ideas, questions or anything you think i might need to know.
edit.. also, whats the deal with the crazyyyyy long boot up time?
kenny
(send from a mobile.. please excuse any typos or punctuation errors)
No its just that with an unlocked bootloader you can flash a new.recovery and that makes it easier to flash roms and also kernels and radios. Kernels and radios can affect your ability to connect with data and can even affect the speeds.
Sent from my MB860 using xda premium
I had a similar situation. So, i did a full wipe installed the rom did another full wipe then installed the appropriate kernel and booted it up. I believe you nedd to install the right kernel per the instructions. It will mot boot if the kernel is not correct.
Sent from my MB860 using xda premium
Thanks again guys,
Man it's a funny issue. I am always able to get in and factory wipe the device, but it seems that sometimes that damn M screen will sit forever. I left it over the course of a movie and a half (probably 3 hours) and that screen was still just sitting there.
I get into the fastboot menu easy enough before that screen hangs, and sometimes i can get into the Boot Android (without BP) (I believe it's called) and sometimes it hangs, and sometimes it works.
Other times, like right now, it boots just fine and kinda fast.
I am having an issue with the RSDLite application recognizing my phone. It did once - then hung at 94% flash of the pudding tutorial. I didn't realize the tutorial says to keep the phone plugged in for 10 minutes even after a fail to see if it actually completes. I havent been able to have the software recognize the phone since- I've installed and reinstalled the motorola drivers, set the phone to usb debugging, and was able to try 2 computers, and 2 different cables. I'll giver another shot though.
I am pretty sure my boot loader was unlocked (as I said I had this all done from an ebay purchase) so I think I can just proceed to the flashing, but if there is a way to confirm that it is indeed locked, I'll take the advice.
The more I read though, it looks like I might just need to send this beast in for a service call with Motorola, because of that damn wifi "error" error. I'd hate to go through all this and realize it still will not work.
Thanks for the replies, I'll always take more suggestions, and if you guys think I'm on the wrong path, let me know. I'll keep searchin dem' forums
If your bootloader is unlocked it will say unlocked in white letters on that M boot logo screen. Did you run "fastboot oem unlock" after the rsd flash?
Sent from my MB860 using XDA App
i was trying to root a phone for someone and after odin completed it said it had failed.
the phone is a telus samsung t959d running froyo.
I followed the instructions from (I would post the url for the link but i am not allowed to.)cyanogenmod's wiki, after it failed I rebooted the phone and it got stuck on the screen in the attached pic. I have tried to boot back into download mode to no avail. From the screen it's stuck on I cannot get any tool to register the device as being present, adb, heimdall, zdiag, etc... I even tried fastboot out of desperation.Before I used odin I tried to get the phone to boot into the bootloader but it only ever went to either recovery or a normal boot and I tried every button press combo I could think of and found and nada.
Even running adb reboot bootloader just made the device boot normally. I think that if I could get it to boot to fastboot usb i could then try fastboot. I am new to rooting devices and have successfully rooted my HTC EVO3D and got s-off and simlock removed for any carrier. So I do know how to follow instructions properly, why flashing the recovery.bin failed I don't know and every fix I seem to find says BOOT TO DOWNLOAD MODE. if I could do that I wouldn't be having this problem lol. Anyway can someone please help me figure this out. Thanks. ANd if you need any further info please let me know. I don't want to have to give my friend my phone due to a software issue.
And YES I did pick PDA not anything else.
machv5 said:
i was trying to root a phone for someone and after odin completed it said it had failed.
the phone is a telus samsung t959d running froyo.
I followed the instructions from (I would post the url for the link but i am not allowed to.)cyanogenmod's wiki, after it failed I rebooted the phone and it got stuck on the screen in the attached pic. I have tried to boot back into download mode to no avail. From the screen it's stuck on I cannot get any tool to register the device as being present, adb, heimdall, zdiag, etc... I even tried fastboot out of desperation.Before I used odin I tried to get the phone to boot into the bootloader but it only ever went to either recovery or a normal boot and I tried every button press combo I could think of and found and nada.
Even running adb reboot bootloader just made the device boot normally. I think that if I could get it to boot to fastboot usb i could then try fastboot. I am new to rooting devices and have successfully rooted my HTC EVO3D and got s-off and simlock removed for any carrier. So I do know how to follow instructions properly, why flashing the recovery.bin failed I don't know and every fix I seem to find says BOOT TO DOWNLOAD MODE. if I could do that I wouldn't be having this problem lol. Anyway can someone please help me figure this out. Thanks. ANd if you need any further info please let me know. I don't want to have to give my friend my phone due to a software issue.
And YES I did pick PDA not anything else.
Click to expand...
Click to collapse
I kept reading other threads and sadly I din't pully the battery first before disconnecting the usb and repartition may have been checked as I see that it does the as default for my version. Also i turned off ODIN as I was hoping a reboot of my computer might help. I will keep trying to find an answer till someone gets back to me. this post may not even show up if I can't do a second post if no one has replied first.
Everyone was a nub at one time wasn't it FUN hahahahahaha sob cry
machv5 said:
I kept reading other threads and sadly I din't pully the battery first before disconnecting the usb and repartition may have been checked as I see that it does the as default for my version. Also i turned off ODIN as I was hoping a reboot of my computer might help. I will keep trying to find an answer till someone gets back to me. this post may not even show up if I can't do a second post if no one has replied first.
Everyone was a nub at one time wasn't it FUN hahahahahaha sob cry
Click to expand...
Click to collapse
I tried a jig and that didn't work. There must be some way of getting the device to give up on completing a task i no longer can give it due to ODIN being shut off.
Why is it that the "how to root/unlocks" never have the "if x fails then do these steps etc..." Had the how to had "pull the battery before disconnecting USB and don't reset or shut off ODIN" I wouldn't be in this mess. I realize that it's user beware but a few important steps like that in case of a fail would go a long way to you guys not shaking your heads. Instead of "silly nub hahahahahaha". No offence but I get that a lot and try to remember that when I teach someone how to use a computer. I am new at phones not at everything.
Further Developments Please can someone help?
I was giving someone a new memory card and they had a Samsung SGH-I896 it has an EB575152VA battery and the one I have the T959D has an EB575152VU battery. I exchanged my battery for hers by accident somehow and when I plugged my phone in it didn't go to the phone triangle computer logo screen it booted to recovery and said it couldn't charge the battery and kept rebooting to recovery. I got my battery back and it booted back to the phone triangle computer logo again. Grrrr....
The other thing I saw while the recovery screen was an error message that said
Code:
E:/data/fota not accessible
(may not be 100% accurate I don't have the battery to check right now but can get it again if need be) anyway I now see that there may be some light at the end of the tunnel. i have the correct stock firmware for the device I tried flashing it while in recovery but the phone kept rebooting before anything got done. My question is how can I get the dang phone to stop asking for Odin and go to recovery so I can flash stock firmware and ROM back to it? As I cannot as far as I know give it what it wants because I reset Odin and nothing seems to see that the phone is connected to the computer. I am going to try the other battery on a full charge to see what that does.
I am new at all this and want to get it fixed. I cannot afford to send it off to a service center and besides that I want to do it myself as I want to become a developer and droid technician. I would gladly donate to anyone but am still trying to get Google to accept my pay-as-you-go credit card and I don't have PayPal either. Which is really frustrating when it comes to giving back. I posted a Q&A on how to without PayPal or CC but as of the last time I checked no one has gotten back to me about it.
The CyanogenMod guide is flat out WRONG. I've tried to change it, but anything I do is reverted in an instant. I also tried to use it to install the ROM only, ended up bricking my phone and it took me hours to unbrick. That's how I became acquainted with XDA.
So, to get this straight:
1. you're using the stock USB cable
2. you remove the battery
3. you hold volume down
4. you plug in the usb cable
5. after a few seconds, you release volume down
6. the screen does not display a yellow triangle with an android
Posted from my Galaxy Tab with CM10
MultipleMonomials said:
The CyanogenMod guide is flat out WRONG. I've tried to change it, but anything I do is reverted in an instant. I also tried to use it to install the ROM only, ended up bricking my phone and it took me hours to unbrick. That's how I became acquainted with XDA.
So, to get this straight:
1. you're using the stock USB cable
2. you remove the battery
3. you hold volume down
4. you plug in the usb cable
5. after a few seconds, you release volume down
6. the screen does not display a yellow triangle with an android
Posted from my Galaxy Tab with CM10
Click to expand...
Click to collapse
That is correct. If you think that my idea below is a bad one or if I downloaded the wrong firmware package please let me know and /or you have a fix that will work? ty
I have though come up with an idea that may work. I am going to charge the "wrong" battery in erm the right phone lol and then use it to trick the device into booting into recovery instead of the cellphone triangle computer (CTC, for want of a better acronym) The I896 battery ends in a V not an ? (sorry can't rem don't have it on me) from the I896 model I think it is, plugging it into USB with the power off sends it to recovery with the "battery cannot be charged " message instead of the CTC screen.
I tried it but the charge in the battery was too low and rebooted. I am hoping that with a full charge (as long as I don't power on the phone first as this will make it go to CTC logo again.
I am hoping that I can install the update.zip that I made by first unzipping the T959UVJFD_firmware.tar I downloaded then unpacked and then repacked into an update.zip as I don't think that it will read the package as a tar file and if it's not called update.zip The recovery is still stock. If I get the phone working I am not going to try unlocking and rooting it again. I will just post two separate adverts one as a carrier locked device and the other one (higher of course to cover buying the unlock from Telus) as carrier unlocked and then I will buy the unlock code if the blah blah you get the drift. sorry for rambling on.
oh and I can't rem if I said this or not, In recovery it "E:/data/fota not accessible" I don't know what that means yet I have been busy with other things and haven't looked it up yet.
Since you can get into at least some version of recovery, your bootloader is intact and you should be able to unbrick it. You ought to be able to get into download mode using a download jig. You can get one on ebay for a few bucks or you can make one yourself. There's a guide floating around here somewhere that lets you make one from a microusb cable.
Posted from my Galaxy Tab with CM10
Okay, So I am as NOOB as NOOB can be,
I got a used SGS2 (Bell/Virgin), I am on Telus so I figured, how hard can it be to unlock it instead of paying some dude to do it for me? (First mistake, and have been humbled every step of the way since!...)
Anyway I will try to keep this relatively short (it will be difficult)... ...I read a few things online and saw that I needed ODIN and a Rooting software, I originally used SuperOneClick, and to download the right insecure kernel to match my original one etc... ...problem is I obviously didn't read nearly enough when I started because I was almost done and then there was a hiccup when SuperOneClick said that I needed to enable SU in Kies. So I decided to go into Kies to try and do so but the instructions before I started Rooting said to put the phone in USB debugging mode. Apparently Kies doesn't see the phone if it is in that mode. Well by this time I can't get past the logo screen and this is where my downward spiral begins.
I then tried to unroot the phone to go back to stock but didn't really know what I was doing and then I read something about the cache needing to be wiped and then after that I read that maybe my OS was wiped. So at this point I did lots of reading (what I should have done in the first place) and most of anything useful I found was on XDA so that is why I am here. It seemed like yes, in fact my OS was wiped because of one of my not so S-M-R-T actions. So I fumbled through and found the right OS for my S2 and I had ODIN going strong and I had the OS loading, the green bar getting bigger in ODIN and the blue bar working it's way across the screen of my S2...I thought "finally!!, I rock!!"... ...then for some reason everything stopped! I had seen in a post that I had to uninstall Kies before doing anything, which I did...but I didn't see until after the fact that my anti-virus likely interfered (I didn't disable it for the process before I started).
At that point of course I was left with a phone that says "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
So then I was afraid to try anything else because many say to steer clear of Kies and also I had read that I may need a USB jig to be able to get it back into download mode because all I was getting was the "firmware upgrade issue" screen. I did make a USB jig with a resistance of 300K Ohms and I *can* get the phone into download mode. (Though another concern is that when I plug the USB jig in and it brings the phone into download mode, the counter is not reset and I read that that was supposed to be reset by the jig.)
So last night I got brave and decided to try and run ODIN and to have another attempt at installation of OS. Now I can get ODIN to detect the phone, but I put the I9100MUGLD3_I9100MBMCLD3_I9100MXXLD3_HOME.tar.md5 file into the PDA section of ODIN and it starts and gets to the part where it says loading firmware or something and then bootload.bin and it stayed like that for like, an hour and then I gave up, fearing that I am just going to screw it up even more.
So now I decided that I am not even close to knowing what to do next but every time I found anything to move forward it was on this site so I figured I may as well join the site since I have been here so often. Now I am hoping for some kind of miracle...so, in advance, please please please and thank you thank you thank you all for your input. (Sorry for the length of this I just wanted to get all the info I could into this)
Its quite a long story and didnt bother reading it.
If you can still access your phone via odin at downloadmode. Flash a stock firmware for your device and it should fix if it is just a soft brick.
Sent from my GT-I9100 using Tapatalk
UnwiredDroid said:
Its quite a long story and didnt bother reading it.
If you can still access your phone via odin at downloadmode. Flash a stock firmware for your device and it should fix if it is just a soft brick.
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
Sorry for the length of the story, I thought there may be alot of useful info mixed in with the useless info... ...when you say use stock firmware do you mean the kernel or the actual OS? I tried loading ICS onto it (which I thought was stock but I may be wrong). Is it supposed to be gingerbread or something else? Also where would I find a good file for it.
Thank you again for any input, very much appreciated!
Hey ,
I also have a Virgin Samsung S2 i9100 and the first time I tried rooting it, it got stuck on the screen with the yellow triangle and wouldnt move at all. I believe it was bricked?
anyways, I m not sure I totally understand your situation, but I solved my problem using this thread
http://forum.xda-developers.com/showthread.php?p=21493413
look it under the i9100M section. hope this helps
schtiven said:
Hey ,
I also have a Virgin Samsung S2 i9100 and the first time I tried rooting it, it got stuck on the screen with the yellow triangle and wouldnt move at all. I believe it was bricked?
anyways, I m not sure I totally understand your situation, but I solved my problem using this thread
http://forum.xda-developers.com/showthread.php?p=21493413
look it under the i9100M section. hope this helps
Click to expand...
Click to collapse
Thank you all so much for your help, I could not get it to work after several tries, I even tried three or 4 different USB cables and ports on my PC and still no. I read on another thread that one person tried another PC and it worked so I tried my friend's laptop and it worked!...my SGS2 boots up and all that now! Very very happy thank you all.
Hey all, this is my first post on this forum. I registered just to let my voice be heard.
Let me just say that I have done extensive research into these problems but I don't want to brick my phone so I want to know the direct steps for me.
OK my problems are:
Upon turning on the phone the original Motorola logo is gone and is instead replaced by:
"Unlocked. PwrReason: PWR_KEY_PRESS. OS will boot in 5 seconds. Press a key to stop countdown. Avaliable Modes are: " and lists 14 different modes I can choose
This happened after I accidentally deleted my pds folder or something of the sort. I must've partitioned something accidentally and as a result my phone did not boot the next time around. It booted after I did a battery pull but gave me the next problem.
Upon booting into CM10.1 I noticed that the soft keys would not work. The entire screen was recognized as one big touch surface.
I deduced that some file was deleted which makes the screen recognize the soft keys, so I proceeded to do some research into it. The methods I saw to do were doing some sort of pdsfix which is not recommended unless necessary, which in my case is very necessary. I can boot into Romracer's recovery (5.0.2.7 I believe it is) as well as my OS. Everything is working except for those problems I listed. I am not sure if my phone can boot into fastboot but I can try. Please post your answers because I really need to get my phone working perfectly again. At this point, it is only useful for texting and a little music (and settings). I can't go into much else without restarting the phone each time (you must know why).
EDIT 15/04/13
-----------------------------------------------------------
I just flashed pdsfix(gingerbread).zip and I am now able to use my phone at normal speeds and even overclock if necessary. I was running epinter's CM10.1 Rom
Fixed half the problem!
Okay so after many hours of trying, I managed to install the drivers for fastboot on my computer and did the fix for the pds file.
First I downloaded moto-fastboot.zip and extracted to my C:/ drive.
Then I tested if my device was recognized. It didn't recognize it at all, so I went into device manager.
In device manager there was my problem. I saw fastboot with a yellow exclamation sign. I right-clicked it and directed it to where I had previously downloaded fastboot drivers. (Found them here: FASTBOOT DRIVERS
It installed nicely and when I tried the commands listed in Method 2 on this page PDS Partition Fix it worked perfectly!
So I proceeded to restart the phone, no issues. But the Motorola logo at the very beginning is still not there. It says unlocked at the top left and displays the same options as before. The phone is still fully functional without it, but I want to get it back. I will be doing more to fix this though.
But the best part is that, my soft-keys are working perfectly! :laugh: I do notice a little lag in the system but that will be fixed soon. Hope this helped anyone who didn't know what to do.
P.S. If you find a way to restore the Motorola logo on boot, please tell me!
http://forum.xda-developers.com/showthread.php?t=1423763
Logo and animation
Mojar7070 said:
http://forum.xda-developers.com/showthread.php?t=1423763
Logo and animation
Click to expand...
Click to collapse
Perfect! Thanks much for finding that for me. I now have the problems fixed except that my cpu won't clock above 608 mhz even when I put the min clock slider higher than that value.
I suspect that perhaps I flashed the froyo pdsfix instead of gingerbread. Maybe that is causing the problem. I'll try and post my results soon.
My Atrix 4g is fixed!!
Wow I can't believe I finally fixed it! It was as I suspected. After downloading the pdsfix(gingerbread).zip I rebooted my phone into fastboot and proceeded to flash the zip. And who would've guessed it? I am now able to clock at usual speeds including the 1000MHz of old ^_^. I am sooo glad I found this forum. If anyone had similar problems you can try the steps I did.
P.S. For the record I was running epinter's CM10.1 Rom for the Atrix 4g. I may go to Neutrino's in the near future, but I am just glad to have my phone back in working order :laugh::laugh: