i was trying to root a phone for someone and after odin completed it said it had failed.
the phone is a telus samsung t959d running froyo.
I followed the instructions from (I would post the url for the link but i am not allowed to.)cyanogenmod's wiki, after it failed I rebooted the phone and it got stuck on the screen in the attached pic. I have tried to boot back into download mode to no avail. From the screen it's stuck on I cannot get any tool to register the device as being present, adb, heimdall, zdiag, etc... I even tried fastboot out of desperation.Before I used odin I tried to get the phone to boot into the bootloader but it only ever went to either recovery or a normal boot and I tried every button press combo I could think of and found and nada.
Even running adb reboot bootloader just made the device boot normally. I think that if I could get it to boot to fastboot usb i could then try fastboot. I am new to rooting devices and have successfully rooted my HTC EVO3D and got s-off and simlock removed for any carrier. So I do know how to follow instructions properly, why flashing the recovery.bin failed I don't know and every fix I seem to find says BOOT TO DOWNLOAD MODE. if I could do that I wouldn't be having this problem lol. Anyway can someone please help me figure this out. Thanks. ANd if you need any further info please let me know. I don't want to have to give my friend my phone due to a software issue.
And YES I did pick PDA not anything else.
machv5 said:
i was trying to root a phone for someone and after odin completed it said it had failed.
the phone is a telus samsung t959d running froyo.
I followed the instructions from (I would post the url for the link but i am not allowed to.)cyanogenmod's wiki, after it failed I rebooted the phone and it got stuck on the screen in the attached pic. I have tried to boot back into download mode to no avail. From the screen it's stuck on I cannot get any tool to register the device as being present, adb, heimdall, zdiag, etc... I even tried fastboot out of desperation.Before I used odin I tried to get the phone to boot into the bootloader but it only ever went to either recovery or a normal boot and I tried every button press combo I could think of and found and nada.
Even running adb reboot bootloader just made the device boot normally. I think that if I could get it to boot to fastboot usb i could then try fastboot. I am new to rooting devices and have successfully rooted my HTC EVO3D and got s-off and simlock removed for any carrier. So I do know how to follow instructions properly, why flashing the recovery.bin failed I don't know and every fix I seem to find says BOOT TO DOWNLOAD MODE. if I could do that I wouldn't be having this problem lol. Anyway can someone please help me figure this out. Thanks. ANd if you need any further info please let me know. I don't want to have to give my friend my phone due to a software issue.
And YES I did pick PDA not anything else.
Click to expand...
Click to collapse
I kept reading other threads and sadly I din't pully the battery first before disconnecting the usb and repartition may have been checked as I see that it does the as default for my version. Also i turned off ODIN as I was hoping a reboot of my computer might help. I will keep trying to find an answer till someone gets back to me. this post may not even show up if I can't do a second post if no one has replied first.
Everyone was a nub at one time wasn't it FUN hahahahahaha sob cry
machv5 said:
I kept reading other threads and sadly I din't pully the battery first before disconnecting the usb and repartition may have been checked as I see that it does the as default for my version. Also i turned off ODIN as I was hoping a reboot of my computer might help. I will keep trying to find an answer till someone gets back to me. this post may not even show up if I can't do a second post if no one has replied first.
Everyone was a nub at one time wasn't it FUN hahahahahaha sob cry
Click to expand...
Click to collapse
I tried a jig and that didn't work. There must be some way of getting the device to give up on completing a task i no longer can give it due to ODIN being shut off.
Why is it that the "how to root/unlocks" never have the "if x fails then do these steps etc..." Had the how to had "pull the battery before disconnecting USB and don't reset or shut off ODIN" I wouldn't be in this mess. I realize that it's user beware but a few important steps like that in case of a fail would go a long way to you guys not shaking your heads. Instead of "silly nub hahahahahaha". No offence but I get that a lot and try to remember that when I teach someone how to use a computer. I am new at phones not at everything.
Further Developments Please can someone help?
I was giving someone a new memory card and they had a Samsung SGH-I896 it has an EB575152VA battery and the one I have the T959D has an EB575152VU battery. I exchanged my battery for hers by accident somehow and when I plugged my phone in it didn't go to the phone triangle computer logo screen it booted to recovery and said it couldn't charge the battery and kept rebooting to recovery. I got my battery back and it booted back to the phone triangle computer logo again. Grrrr....
The other thing I saw while the recovery screen was an error message that said
Code:
E:/data/fota not accessible
(may not be 100% accurate I don't have the battery to check right now but can get it again if need be) anyway I now see that there may be some light at the end of the tunnel. i have the correct stock firmware for the device I tried flashing it while in recovery but the phone kept rebooting before anything got done. My question is how can I get the dang phone to stop asking for Odin and go to recovery so I can flash stock firmware and ROM back to it? As I cannot as far as I know give it what it wants because I reset Odin and nothing seems to see that the phone is connected to the computer. I am going to try the other battery on a full charge to see what that does.
I am new at all this and want to get it fixed. I cannot afford to send it off to a service center and besides that I want to do it myself as I want to become a developer and droid technician. I would gladly donate to anyone but am still trying to get Google to accept my pay-as-you-go credit card and I don't have PayPal either. Which is really frustrating when it comes to giving back. I posted a Q&A on how to without PayPal or CC but as of the last time I checked no one has gotten back to me about it.
The CyanogenMod guide is flat out WRONG. I've tried to change it, but anything I do is reverted in an instant. I also tried to use it to install the ROM only, ended up bricking my phone and it took me hours to unbrick. That's how I became acquainted with XDA.
So, to get this straight:
1. you're using the stock USB cable
2. you remove the battery
3. you hold volume down
4. you plug in the usb cable
5. after a few seconds, you release volume down
6. the screen does not display a yellow triangle with an android
Posted from my Galaxy Tab with CM10
MultipleMonomials said:
The CyanogenMod guide is flat out WRONG. I've tried to change it, but anything I do is reverted in an instant. I also tried to use it to install the ROM only, ended up bricking my phone and it took me hours to unbrick. That's how I became acquainted with XDA.
So, to get this straight:
1. you're using the stock USB cable
2. you remove the battery
3. you hold volume down
4. you plug in the usb cable
5. after a few seconds, you release volume down
6. the screen does not display a yellow triangle with an android
Posted from my Galaxy Tab with CM10
Click to expand...
Click to collapse
That is correct. If you think that my idea below is a bad one or if I downloaded the wrong firmware package please let me know and /or you have a fix that will work? ty
I have though come up with an idea that may work. I am going to charge the "wrong" battery in erm the right phone lol and then use it to trick the device into booting into recovery instead of the cellphone triangle computer (CTC, for want of a better acronym) The I896 battery ends in a V not an ? (sorry can't rem don't have it on me) from the I896 model I think it is, plugging it into USB with the power off sends it to recovery with the "battery cannot be charged " message instead of the CTC screen.
I tried it but the charge in the battery was too low and rebooted. I am hoping that with a full charge (as long as I don't power on the phone first as this will make it go to CTC logo again.
I am hoping that I can install the update.zip that I made by first unzipping the T959UVJFD_firmware.tar I downloaded then unpacked and then repacked into an update.zip as I don't think that it will read the package as a tar file and if it's not called update.zip The recovery is still stock. If I get the phone working I am not going to try unlocking and rooting it again. I will just post two separate adverts one as a carrier locked device and the other one (higher of course to cover buying the unlock from Telus) as carrier unlocked and then I will buy the unlock code if the blah blah you get the drift. sorry for rambling on.
oh and I can't rem if I said this or not, In recovery it "E:/data/fota not accessible" I don't know what that means yet I have been busy with other things and haven't looked it up yet.
Since you can get into at least some version of recovery, your bootloader is intact and you should be able to unbrick it. You ought to be able to get into download mode using a download jig. You can get one on ebay for a few bucks or you can make one yourself. There's a guide floating around here somewhere that lets you make one from a microusb cable.
Posted from my Galaxy Tab with CM10
Related
My phone is stuck on the vibrant scree and nothing happens........ i am trying to use odin to flash back to stick and it is always stuck on file analysis.....please help!!!!!!!!!!!!!!!
Try this: http://forum.xda-developers.com/showpost.php?p=8445823&postcount=11
Well mine just sits on file analysis for 10 mins and nothing else happens...can someone please help me i have no phone.
Remove the USB from the phone, remove battery.
Place the battery back in your phone and get back into DOWNLOAD MODE
Close Odin
Run Odin as Administrator
Select the 512 PIT FIle
Select the T959UVJFD.tar file for PDA
Plug in your phone (Make sure you see a COM Port come up)
Start Flashing
rolf90 said:
Well mine just sits on file analysis for 10 mins and nothing else happens...can someone please help me i have no phone.
Click to expand...
Click to collapse
as you i had the same problem and finally got it to work by watching this video on you tube:
1.go to you tube
2.search for flash vibrant
3.first video should be "Flashing Firmware with Odin on Samsung Vibrant" by ZDoomentral, its a 3:00 min video
(sorry can't post direct link but i a restricted since i am a new user)
pay close attention as to how he gets his phone into DOWNLOAD MODE, thats where i was going wrong, and just follow the directions of the video.
my phone is up and running with stock kernel and re-rooted it
man i just want to say i just had this same issue happen to be... im a truck driver and having my phone is serious... mainly to play games or what not...but i just got some from Minnesota and tried the odin method and saw that video on you which help give me a visual and its back up ... im very happy... sad to say it was a careless mistake somewhere but i did a back like i always do and it didnt work for some reason...i had a g1 before this vibrant and ive flashed a lots of roms... but anyway i wanna thank everyone one this forum ... i got my phone back
Does this restart the WHOLE THING? because I have information I didn't backup :/
Yes. It deletes EVERYTHING. Just like it's brand out of the box.
I recommend using Titanium Backup and back all your apps. ALWAYS ALWAYS, do a Nandroid backup before flashing ANYTHING.
scootatheschool1990 said:
Does this restart the WHOLE THING? because I have information I didn't backup :/
Click to expand...
Click to collapse
If you have adb up and running & have the ability to get into recovery while you're bricked you can do aN adb pull before flashing
Adb remount
Adb pull /sdcard
After un-bricking you can adb push the folders back
When I did it..it flash back to stock but I have titanium back up so mt phone is back to how I had it ...and I still have every thing else back on, like my movies music etc..
Sent from my SGH-T959 using XDA App
I was trying to help my friend with his Vibrant and now it's stuck at the splash screen in a loop. I can't seem to get it to download mode or recovery or anything. I've pulled the battery, held down both vol keys while pushing power. Any time I connect the usb, it just starts up the boot loop without giving me a chance to do anything else. I can never get to the green charging battery. Any ideas?
I guess I could provide more info... We had rooted the phone multiple times, but Superuser would FC every time. So, we decided to flash eugene's froyo build (http://forum.xda-developers.com/showthread.php?t=740558). That's when I got the boot loop. Odin said it was finished, and it did not go into recovery. It just started boot looping. Maybe I didn't wait long enough before hitting the power? I'm not sure. Anyway. I'm stuck.
EDIT: Unstuck now. I guess I just need to not panic and read more. I held both VOL keys in while connecting to USB and it went into downloading mode. SO, I flash a stock 2.1 ROM and it's back to the way it was. Calling works fine. No data though. Apparently, that was one of the issues before. I'll try rooting again, but it seems like there's another issue. Also... No settings survive reboots. Like turning on USB debugging... Strange.
Hi everyone. I have a samsung galaxy s vibrant on android 2.2. I am a total noob with any modifications but am going overseas next month and wanted to unlock my phone. After looking into rooting etc. I downloaded odin and darky's ROM resurrection edition. I followed the prompts to go into recovery and wipe etc. and remove battery and turn back on. After using odin and restarting my phone now just flashes the start screen showing galaxy s GT-I9000. I can't enter recovery mode just download mode. I'm unsure what to do and even tried mounting another recovery file on odin which lead me to the same point. Any help would be greatly appreciated.
Try re-flashing it and see if that works, sometimes that's all it takes. It's possible you just had a bad flash.
I've tried about 5 times now and it seems to keep failing to boot after flash and sticking on the initial boot screen and flashing on and off. Is there a way to download and flash an original ROM and mount on odin to start over?
Try getting into download mode. Hold and continue to hold up & down volume controls while holding in the power button. When the Vibrant logo comes up release only the power button. If you do get into recovery that way scroll down to install zip from sd card and install whatever rom you've got on there that you want to use. Let me know if that works or not.
I can still only get into download mode. I've tried flashing again with both ROMs I have and they both are doing the same thing. Holy frustrating lol
Spike84 said:
I can still only get into download mode. I've tried flashing again with both ROMs I have and they both are doing the same thing. Holy frustrating lol
Click to expand...
Click to collapse
Look for a hard surface... concrete for example.. now take your phone and throw it as hard as you can... Just kidding don't do that, that's a permanent reboot. I know the frustration, I've been there many times. You may want to go back and read through the noob guide, I'm not sure what else to suggest. Hopefully someone else will read this and have a better suggestion. Good luck.
haha yeah the thought crossed my mind. I appreciate your help. I'm still reading through the forum. Most instructions seem to require me to reach recovery mode or usb debugging. My phone is no longer being recognized on the computer but odin is obviously still recognizing so I'm going to try a fresh 2.2 on odin and see if that works.
Good luck, I'm rooting for ya. If that does not work and your close to a T-mobile store I'd just run it in and have them check it out, they may have to replace it.
Thanks again. I'm actually in Canada and using a sub provider from bell "virgin mobile".
Hi all. I have searched for this problem and found some similar ones, but nothing quite like this.
The problem first started when I tried flashing Zedomax Kernel v3 via Odin. Odin reported a successful flash, but when it went to reboot it sat at the Galaxy S2 splash screen with yellow triangle for about 45 mins. I figured something was wrong so rebooted to CWM. I was able to get into both CWM and download mode at this point.
No matter what I tried I could not get the phone to boot up, so I thought I would try flashing a factory image to get back to out of the box settings. In the middle of this Odin got stuck on a step and then failed out after a good 10-30 minutes (sorry for lack of detail, this was pretty late last night).
Now, when I try to boot into recovery mode I see the [phone]....!....[computer] screen with the message "Firmware upgrade encountered" (part of this screen is cut off on the right, and appears to overflow to the left side? weird). I can boot into download mode, but Odin doesn't see my phone when I plug it in. The device doesn't show up in device manager either.
Things I have tried:
-Different USB port
-Kies "Resolution connection errors" button, which seems to reinstall the drivers
-Reboot computer after above step
-Remove battery from phone and replace
After these steps I still can't get my computer to see my plugged in phone in any way. I'm getting kinda nervous but the only thing giving me hope is that I can get it into download mode. Any ideas on how to get Odin to see it again?
Remove Kies and reinstall see if it picks the phone up and installs the drivers .
jje
OperationIvy85 said:
Hi all. I have searched for this problem and found some similar ones, but nothing quite like this.
The problem first started when I tried flashing Zedomax Kernel v3 via Odin. Odin reported a successful flash, but when it went to reboot it sat at the Galaxy S2 splash screen with yellow triangle for about 45 mins. I figured something was wrong so rebooted to CWM. I was able to get into both CWM and download mode at this point.
No matter what I tried I could not get the phone to boot up, so I thought I would try flashing a factory image to get back to out of the box settings. In the middle of this Odin got stuck on a step and then failed out after a good 10-30 minutes (sorry for lack of detail, this was pretty late last night).
Now, when I try to boot into recovery mode I see the [phone]....!....[computer] screen with the message "Firmware upgrade encountered" (part of this screen is cut off on the right, and appears to overflow to the left side? weird). I can boot into download mode, but Odin doesn't see my phone when I plug it in. The device doesn't show up in device manager either.
Things I have tried:
-Different USB port
-Kies "Resolution connection errors" button, which seems to reinstall the drivers
-Reboot computer after above step
-Remove battery from phone and replace
After these steps I still can't get my computer to see my plugged in phone in any way. I'm getting kinda nervous but the only thing giving me hope is that I can get it into download mode. Any ideas on how to get Odin to see it again?
Click to expand...
Click to collapse
That kernel is for the Epic touch 4g is that your phone or do you have the international version? If you flashed the wrong kernel it could cause problems.
Yes it's an Epic touch 4g from sprint.
EDIT: Uninstalled Kies, reinstalled Kies, restarted computer, still no kind of recognition of my phone in any state (powered off, at "Firmware upgrade encountered" screen it boots into, or in download mode). Starting to get nervous, I used to at least hear a sound when plugging my phone into my comp. It is like there is nothing on the other end of the USB cable.
More things I have tried:
-All of the above steps on a different computer
-Sweet talking it
-Talking dirty to it
Am I brick'd? I figure not, since I can at least get into download mode. Not sure what else I can do though. I'd go see what the Sprint store can do for me, but on the download mode screen it lists my custom binary download count as 5, I understand they will see that and tell me I'm out of luck?
OperationIvy85 said:
More things I have tried:
-All of the above steps on a different computer
-Sweet talking it
-Talking dirty to it
Am I brick'd? I figure not, since I can at least get into download mode. Not sure what else I can do though. I'd go see what the Sprint store can do for me, but on the download mode screen it lists my custom binary download count as 5, I understand they will see that and tell me I'm out of luck?
Click to expand...
Click to collapse
Try to reset your binary counter with a usb jig.
you could try and download the drivers again from here and see if it then connects
http://modem-techno.blogspot.com/2010/09/epic-4g-usb-driver-download.html
I also had a similar problem once with an old i9000 and what worked was doing this and then connecting the phone first and then opening Odin.For some reason opening Odin first and connecting wouldnt find the phone.If nothing else works try wipeing the bin counter with the jig and send it back.Youll have to say that kies crashed while updating on Win7 64bits.Samsung know that before the September 30th kies update kies wasnt fully functional with 64bit drivers and they had a few phones replaced under warranty because of crashing kies updates on Win7 64bits.
Thanks for the replies everyone.
I made a USB jig but it had no result. I checked the resistance with a multimeter and I am connected across pins 4 and 5 of the usb dongle I bought. I plug it in and nothing happens.
I can still get into download mode by the usual means, just no recognition from my computer, odin, or kies. Very frustrating. Am I going to have to buy a new one or is there another way to reset the bin counter?
EDIT: Got the USB jig to work! I was using a bad diagram and was on pins 1/2 instead of 4/5. Now I can't boot, can't get to recovery, can't get any PC to recognize my phone in download mode.. but at least my download screen says "Custom binary download: NO." So if nothing else works before tomorrow evening I'm gonna bring this thing back to the Sprint store and tell them what cooza said about kies crashing on win7 64 bit. Thanks everyone! Also I just realized there is a specific forum for Epic 4G touch.. sorry >.>
The good thing is that your bin counter is at "0" again.The Kies thing is the real deal as there are also posts here on XDA of the same thing happening.I also know its true from first hand experience as it has happened to me and when i told them about the Win7 64bit driver problem (this happened to me a couple of months back too) they had no option but to accept it cos they know its true.Also i offered to e-mail links from forums with other complaints from users on 64bit PCs but they didnt even dought my storey and in 4 days it was back in my hand.I told them that when the update finalized the programe froze and the phone rebooted to a black screen.Had to pull the battery cos it appeared to be dead and refused to reboot again.Important to say that you where on Kies prior to the update I mentioned.Ived update to the latest Kies and it works fine now on my Win7 64bit so be carefull there that date is important
Thanks cooza I really appreciate your help. I do have a couple questions though.
1. Is the update you are referring to an update to Kies software.. or an update to the Galaxy S2? Reason I ask is because my phone is the Epic 4G Touch (accidentally posted in this forum >.>), will they still believe my story?
2. Not sure if you will know the answer to this one, but should I go through Samsung tech support or can I take it back to the Sprint store where I bought it?
3. Just trying to get clear on the story I should tell them. I was using Kies to update my phone on a Win7 64bit computer, but I accidentally used the version of Kies from before the Sept. 30 update? And then the phone crashed resulting in it's current state. Correct? Anything else I should watch out for?
4. With the problem you are describing with Win7 x64, does the phone go into a soft brick where it won't boot up?
Thanks again.. you've been very helpful
OperationIvy85 said:
Thanks cooza I really appreciate your help. I do have a couple questions though.
1. Is the update you are referring to an update to Kies software.. or an update to the Galaxy S2? Reason I ask is because my phone is the Epic 4G Touch (accidentally posted in this forum >.>), will they still believe my story?
2. Not sure if you will know the answer to this one, but should I go through Samsung tech support or can I take it back to the Sprint store where I bought it?
3. Just trying to get clear on the story I should tell them. I was using Kies to update my phone on a Win7 64bit computer, but I accidentally used the version of Kies from before the Sept. 30 update? And then the phone crashed resulting in it's current state. Correct? Anything else I should watch out for?
4. With the problem you are describing with Win7 x64, does the phone go into a soft brick where it won't boot up?
Thanks again.. you've been very helpful
Click to expand...
Click to collapse
Kies via to its Sep 30th update was not fully compatable with 64bits and gave a lot of problems to a lot of people.I had a few problems with it when I got a new laptop (HP Win7 64bit) so started searching the web for solutions and found that kies was designed mainly to support the windowsXP versions 32bit and had caused Samsung to accept various repairs under warranty because of crashing Kies updates mainly on android running phones.For some reason Bada didnt seam to affected.Maybe cos there arnt to many around like android.In the 4G forum there is post from someone who has bricked their phone using Kies to update and a reply from another with the same problem.Take it into where you bought it to start with and if its not there problem then they might send it back to Samsung for you.All you need to say is that you where updating your firmware via kies and on completion it froze and the phone booted to a black screen like mine did.You had to pull the battery and restart your PC to close Kies cos it wouldnt close or minimize or anything.Tell them that you searched on the net for possible causes and found what i told you about Kies and since you have a Win7 64bits PC then thats most likely to have been the cause.Your bin counter is at 0 so there is no way they can counter-attack your story.
OperationIvy85 said:
Hi all. I have searched for this problem and found some similar ones, but nothing quite like this.
The problem first started when I tried flashing Zedomax Kernel v3 via Odin. Odin reported a successful flash, but when it went to reboot it sat at the Galaxy S2 splash screen with yellow triangle for about 45 mins. I figured something was wrong so rebooted to CWM. I was able to get into both CWM and download mode at this point.
No matter what I tried I could not get the phone to boot up, so I thought I would try flashing a factory image to get back to out of the box settings. In the middle of this Odin got stuck on a step and then failed out after a good 10-30 minutes (sorry for lack of detail, this was pretty late last night).
Now, when I try to boot into recovery mode I see the [phone]....!....[computer] screen with the message "Firmware upgrade encountered" (part of this screen is cut off on the right, and appears to overflow to the left side? weird). I can boot into download mode, but Odin doesn't see my phone when I plug it in. The device doesn't show up in device manager either.
Things I have tried:
-Different USB port
-Kies "Resolution connection errors" button, which seems to reinstall the drivers
-Reboot computer after above step
-Remove battery from phone and replace
After these steps I still can't get my computer to see my plugged in phone in any way. I'm getting kinda nervous but the only thing giving me hope is that I can get it into download mode. Any ideas on how to get Odin to see it again?
Click to expand...
Click to collapse
I also have this same problem now. Except that....I cannot even get into download mode. My phone is stuck at the [phone]....!....[computer] screen, but without any message. I am told that the exclamation mark tells Samsung that warranty is voided.
Is there anyway I can do anything to save my phone?
Who told you that the exclamation point means you voided your warranty?
bajaber said:
I also have this same problem now. Except that....I cannot even get into download mode. My phone is stuck at the [phone]....!....[computer] screen, but without any message. I am told that the exclamation mark tells Samsung that warranty is voided.
Is there anyway I can do anything to save my phone?
Click to expand...
Click to collapse
The exclamation point on a normal boot up screen (Galaxy S II splash screen) means there is a custom rom installed. This can be removed with a USB jig, which will also reset your custom binary counter.
I have absolutely no idea still what [phone]....!....[computer] means though. I ended up taking my phone back to the Sprint store and they replaced it for a small service charge while telling me next time I won't be so lucky. My next step was going to be to try calling Samsung with the story cooza suggested. I told that same story to the people at Sprint but they definitely didn't buy it, but you may have better luck with Samsung. If you get this resolved I'd be curious to hear how, but I am not optimistic for you
bajaber said:
I also have this same problem now. Except that....I cannot even get into download mode. My phone is stuck at the [phone]....!....[computer] screen, but without any message. I am told that the exclamation mark tells Samsung that warranty is voided.
Is there anyway I can do anything to save my phone?
Click to expand...
Click to collapse
The sign you see means that your phone is semi-bricked and that you needed a jig to force the phone to boot into download mode.You can buy one on ebay for a couple of bucks.Best you do cos it could may mean that your warranty is void.Let me explain,no one can actually say that your warranty is void because of this sign but being only "semi-bricked" the service centre are still able to enter the phone and see the bin counter.So if you semi-bricked flashing a non official firmware or you have done so earlier and your bin counter is not at 0 then YES your warranty is void.Semi-brick is not so bad as you can normally fix it yourself but Hard-brick is a dead phone and you gotta pay for a jtag .In your case buy a jig force the phone into download mode and re-flash it yourself.You shouldnt need to go anywhere.Semi-bricking is something you save yourself.Just wait till the jig arrives in the mail.
EDIT:there have been posts of people pulling the battery for 10min and re-trying and it has booted to download.They say they have had to do so 4 or 5 times for it to finally work but if youve got time on your hands then give it a try.
---------- Post added at 04:48 PM ---------- Previous post was at 04:22 PM ----------
OperationIvy85 said:
The exclamation point on a normal boot up screen (Galaxy S II splash screen) means there is a custom rom installed. This can be removed with a USB jig, which will also reset your custom binary counter.
I have absolutely no idea still what [phone]....!....[computer] means though. I ended up taking my phone back to the Sprint store and they replaced it for a small service charge while telling me next time I won't be so lucky. My next step was going to be to try calling Samsung with the story cooza suggested. I told that same story to the people at Sprint but they definitely didn't buy it, but you may have better luck with Samsung. If you get this resolved I'd be curious to hear how, but I am not optimistic for you
Click to expand...
Click to collapse
Well at least you got a phone now hope they didnt charge to much!!!!Good on ya mate
Update on my issue....
It turns out the problem is because I tried to flash an I1900 firmware while my phone is a G variant (I900G).
After using the right firmware, it worked.
OperationIvy85 said:
Thanks for the replies everyone.
I made a USB jig but it had no result. I checked the resistance with a multimeter and I am connected across pins 4 and 5 of the usb dongle I bought. I plug it in and nothing happens.
I can still get into download mode by the usual means, just no recognition from my computer, odin, or kies. Very frustrating. Am I going to have to buy a new one or is there another way to reset the bin counter?
EDIT: Got the USB jig to work! I was using a bad diagram and was on pins 1/2 instead of 4/5. Now I can't boot, can't get to recovery, can't get any PC to recognize my phone in download mode.. but at least my download screen says "Custom binary download: NO." So if nothing else works before tomorrow evening I'm gonna bring this thing back to the Sprint store and tell them what cooza said about kies crashing on win7 64 bit. Thanks everyone! Also I just realized there is a specific forum for Epic 4G touch.. sorry >.>
Click to expand...
Click to collapse
Hi, I'm having an exactly same problem with you and I just got a USB jig in mail, but even though I am following the instructions for the USB jig the counter is still not going back to 0 :/
This is the instruction I followed: take battery out for like a minute -> put the battery in but don't turn phone on -> put the usb jig in -> it's supposed to boot up with 0 flash count?
Mine still says 4... Can anyone please help?
sfoksn said:
Hi, I'm having an exactly same problem with you and I just got a USB jig in mail, but even though I am following the instructions for the USB jig the counter is still not going back to 0 :/
This is the instruction I followed: take battery out for like a minute -> put the battery in but don't turn phone on -> put the usb jig in -> it's supposed to boot up with 0 flash count?
Mine still says 4... Can anyone please help?
Click to expand...
Click to collapse
Is yours a i9100? If so is your firmware the latest 2.3.5 KI3 or KI8?
Could be your device has the new bootloader. If so check intratechs original firmware thread in original development section and install his old bootloader via Odin. Have a read while your there to get the latest info.
Good luck
Sent from my GT-I9100 using XDA App
aceofclubs said:
Is yours a i9100? If so is your firmware the latest 2.3.5 KI3 or KI8?
Could be your device has the new bootloader. If so check intratechs original firmware thread in original development section and install his old bootloader via Odin. Have a read while your there to get the latest info.
Good luck
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
Yeah, I got stuck while flashing 2.3.5 Gingerbread... Yeah I think it has a new bootloader, as I remember Odin updating the bootloader section before messing up.
Is there any way I can get the USB jig to work? My phone is no longer recognized by the USB anymore so I can't even flash another bootloader or anything.
Is there anythign I could do to make the USB jig work without connecting it to the computer?
Can you get into download mode using the buttons?
Volume down+home+power
If so try and flash another Rom from intratechs thread to get back to stock.
If that works you can try again.
Sent from my GT-I9100 using XDA App
Hi XDA, been lurking for a while and today decided to start posting, beginning with a relatively urgent question.
My brother's been marveling at the ability to flash custom ROMs onto my Galaxy S2, and decided he wanted to root his Atrix today. Rooting process went well (he used Pete's Motorola Root Tools) and then flashed CWM through ROM Manager, but did NOT unlock his bootloader. After CWM was purportedly done, he put a ROM onto his HDD, turned the phone off, and attempted to boot into CWM. He was greeted with an error message, "Failure to Boot 2, Starting RSD Mode", which pops up whether he tries to turn on the phone normally or by holding the volume button down. Taking out the battery doesn't help.
Now, my assumption is that because he didn't unlock his bootloader, he's getting this error, but my experience with Android dev is limited. So, how would I go about fixing this? My only concern is getting the phone back to a working state, we don't care about the data on it.
Thank you for the time taken to read and answer this question, any and all help is appreciated.
Warm Regards,
Leo
EDIT: Just want to make sure, I did a fair amount of searching before I made this thread and found a bunch of answers, just not sure which one I should do. One thread champions just unlocking the bootloader, others suggest flashing an OEM ROM, which I'm not sure how to do without CWM. Essentially I'm just looking for some guidance and would deeply appreciate any help I can get.
EDIT 2: Forgot to add - he was running 2.2.1 stock. Root was successful. Feel free to ask any questions if necessary.
UPDATE: I've been trying to use these instructions to unlock the bootloader, but I'm stuck on the step that asks you to reboot your phone into RSD mode. The phone doesn't boot without being plugged in, and gives me the following error when I do:
Failed to Boot 2, Starting RSD Mode
"Battery is too low to Flash". Right now the phone's plugged into the wall with this message displaying,
It also goes without saying that RSD Mode, in fact, is never started .
Added some more information (apparently new members aren't allowed to post links, so added the information as UPDATE in the original post).
Again, thanks for your help and suggestions.
Bump, somebody please weigh in.
- Leo
Sent from my i777 using Tapatalk, on ICScrweD 2.1
FatalFlaw said:
Hi XDA, been lurking for a while and today decided to start posting, beginning with a relatively urgent question.
My brother's been marveling at the ability to flash custom ROMs onto my Galaxy S2, and decided he wanted to root his Atrix today. Rooting process went well (he used Pete's Motorola Root Tools) and then flashed CWM through ROM Manager, but did NOT unlock his bootloader. After CWM was purportedly done, he put a ROM onto his HDD, turned the phone off, and attempted to boot into CWM. He was greeted with an error message, "Failure to Boot 2, Starting RSD Mode", which pops up whether he tries to turn on the phone normally or by holding the volume button down. Taking out the battery doesn't help.
Now, my assumption is that because he didn't unlock his bootloader, he's getting this error, but my experience with Android dev is limited. So, how would I go about fixing this? My only concern is getting the phone back to a working state, we don't care about the data on it.
Thank you for the time taken to read and answer this question, any and all help is appreciated.
Warm Regards,
Leo
EDIT: Just want to make sure, I did a fair amount of searching before I made this thread and found a bunch of answers, just not sure which one I should do. One thread champions just unlocking the bootloader, others suggest flashing an OEM ROM, which I'm not sure how to do without CWM. Essentially I'm just looking for some guidance and would deeply appreciate any help I can get.
EDIT 2: Forgot to add - he was running 2.2.1 stock. Root was successful. Feel free to ask any questions if necessary.
UPDATE: I've been trying to use these instructions to unlock the bootloader, but I'm stuck on the step that asks you to reboot your phone into RSD mode. The phone doesn't boot without being plugged in, and gives me the following error when I do:
Failed to Boot 2, Starting RSD Mode
"Battery is too low to Flash". Right now the phone's plugged into the wall with this message displaying,
It also goes without saying that RSD Mode, in fact, is never started .
Click to expand...
Click to collapse
You are correct in just trying to unlock the BL. Unfortunately, you will need a charged battery to do so. If you don't have access to a different battery, you can go to an AT&T store and they should charge it for you.
The OEM you're referring to is a full .sbf, instead of just the smaller "unlock" .sbf. That is an option, but in all honesty, unlocking the BL should be the quickest way to fix your situation.
If you run into any problems, let us know.
Thanks for the advice, it's immensely reassuring. He went to an AT&T store and they were unhelpful, refused to charge it for him I'm going to order a battery charger off Amazon and charge it that way, and will post here when I have results.
In the meantime if anyone else has something to add it would be quite appreciated.
Thanks,
Leo
Sent from my i777 using Tapatalk, on ICScrweD 2.1
Alright, we've run into a problem.
The screen never gets past the error message "Failure to Boot 2, Starting RSD Mode". We turn it off, hold power and up at the same time, and it still boots to that message. I press the power button and hold the volume up button, nothing changes.
The battery is charged.
Is there something I'm missing here?
FatalFlaw said:
Alright, we've run into a problem.
The screen never gets past the error message "Failure to Boot 2, Starting RSD Mode". We turn it off, hold power and up at the same time, and it still boots to that message. I press the power button and hold the volume up button, nothing changes.
The battery is charged.
Is there something I'm missing here?
Click to expand...
Click to collapse
The .sbf's are flashed while your phone is in RSD Mode
in order to charge your battery (to fix the "Battery is too low" message) you will need to sacrifice any USB cable, cut it open and tape the red and black wires to the battery. (Red goes on +, Black goes on -)
ghost_og said:
The .sbf's are flashed while your phone is in RSD Mode
Click to expand...
Click to collapse
Yep, I realized that. I thought "Starting RSD Mode" would at some point subside, and it would say something along the lines of "In RSD Mode" or something. But he flashed an unlock SBF and got it unlocked. He now has a beautiful Atrix running ICS MIUI.
Thank you all for the help.
Same problem but the solution does not work for me
I am in the same boat. I downloaded RSD 5.9 and used the file in pudding.rar. After I loaded the file, RSD said it passed with 100% load but the phone is still stuck in the same place. Can anyone help?
Hey all,
First i'd like to tell my phone was 'working' as it was able to go to download mode.
Im not really an expert, but when I used Google to find a solution for my error I read about using Odin.
(In case you need the error, I will try to edit the thread and add this asap!)
I followed a tutorial about using Odin and tried to get my phone up back and running.
I downloaded the following file for my Samsung J5:
sammobile.com/firmwares/galaxy-j5/SM-J500FN/PHN/download/J500FNXXS1BQG3/181971/
After using the Odin software it somehow got interrupted while installing. (cable came loose I guess, I heard the connect/disconnect sound shortly after each other)
Also I noticed there was a small red text on the screen complaining about the available size on the phone.
Even though the phone installation was interrupted, the phone was still able to get into download mode.
Next up, I decided to place a micro SD card to get extra storage space and retried the Odin process. The final result was a "PASS" (see screenshot)
i.imgur.com/WzFJLaQ.jpg
After the update was done 'succesfully' the phone screen immediately turned to black.
There were no signs of life anymore, not even accessing boot mode / recovery mode no nothing.
I've bought an USB JIG, but sadly also with the JIG I had no luck.
Is there any way to get my phone back and running? or can anyone give me some advice?
I really hope someone can help me out!
Sounds like a hard brick ?
This happens when you try to upgrade or downgrade, some devices don´t allow this or the firmware is not matching.
Pull out battery if it is removable for some minutes then try normal method, if not....
Here the correct method to do a jig by your own or maybe it´s better to buy one (it´s not expensive) to made sure that is correctly made http://www.instructables.com/id/USB-JIG-to-give-life-to-your-Bricked-mobile/
Also you can try with Smart Switch https://youtu.be/y8AZyalTf5Y
Sands207 said:
Sounds like a hard brick ?
Click to expand...
Click to collapse
Can you check your pm's?