Related
Hi all. I have searched for this problem and found some similar ones, but nothing quite like this.
The problem first started when I tried flashing Zedomax Kernel v3 via Odin. Odin reported a successful flash, but when it went to reboot it sat at the Galaxy S2 splash screen with yellow triangle for about 45 mins. I figured something was wrong so rebooted to CWM. I was able to get into both CWM and download mode at this point.
No matter what I tried I could not get the phone to boot up, so I thought I would try flashing a factory image to get back to out of the box settings. In the middle of this Odin got stuck on a step and then failed out after a good 10-30 minutes (sorry for lack of detail, this was pretty late last night).
Now, when I try to boot into recovery mode I see the [phone]....!....[computer] screen with the message "Firmware upgrade encountered" (part of this screen is cut off on the right, and appears to overflow to the left side? weird). I can boot into download mode, but Odin doesn't see my phone when I plug it in. The device doesn't show up in device manager either.
Things I have tried:
-Different USB port
-Kies "Resolution connection errors" button, which seems to reinstall the drivers
-Reboot computer after above step
-Remove battery from phone and replace
After these steps I still can't get my computer to see my plugged in phone in any way. I'm getting kinda nervous but the only thing giving me hope is that I can get it into download mode. Any ideas on how to get Odin to see it again?
Remove Kies and reinstall see if it picks the phone up and installs the drivers .
jje
OperationIvy85 said:
Hi all. I have searched for this problem and found some similar ones, but nothing quite like this.
The problem first started when I tried flashing Zedomax Kernel v3 via Odin. Odin reported a successful flash, but when it went to reboot it sat at the Galaxy S2 splash screen with yellow triangle for about 45 mins. I figured something was wrong so rebooted to CWM. I was able to get into both CWM and download mode at this point.
No matter what I tried I could not get the phone to boot up, so I thought I would try flashing a factory image to get back to out of the box settings. In the middle of this Odin got stuck on a step and then failed out after a good 10-30 minutes (sorry for lack of detail, this was pretty late last night).
Now, when I try to boot into recovery mode I see the [phone]....!....[computer] screen with the message "Firmware upgrade encountered" (part of this screen is cut off on the right, and appears to overflow to the left side? weird). I can boot into download mode, but Odin doesn't see my phone when I plug it in. The device doesn't show up in device manager either.
Things I have tried:
-Different USB port
-Kies "Resolution connection errors" button, which seems to reinstall the drivers
-Reboot computer after above step
-Remove battery from phone and replace
After these steps I still can't get my computer to see my plugged in phone in any way. I'm getting kinda nervous but the only thing giving me hope is that I can get it into download mode. Any ideas on how to get Odin to see it again?
Click to expand...
Click to collapse
That kernel is for the Epic touch 4g is that your phone or do you have the international version? If you flashed the wrong kernel it could cause problems.
Yes it's an Epic touch 4g from sprint.
EDIT: Uninstalled Kies, reinstalled Kies, restarted computer, still no kind of recognition of my phone in any state (powered off, at "Firmware upgrade encountered" screen it boots into, or in download mode). Starting to get nervous, I used to at least hear a sound when plugging my phone into my comp. It is like there is nothing on the other end of the USB cable.
More things I have tried:
-All of the above steps on a different computer
-Sweet talking it
-Talking dirty to it
Am I brick'd? I figure not, since I can at least get into download mode. Not sure what else I can do though. I'd go see what the Sprint store can do for me, but on the download mode screen it lists my custom binary download count as 5, I understand they will see that and tell me I'm out of luck?
OperationIvy85 said:
More things I have tried:
-All of the above steps on a different computer
-Sweet talking it
-Talking dirty to it
Am I brick'd? I figure not, since I can at least get into download mode. Not sure what else I can do though. I'd go see what the Sprint store can do for me, but on the download mode screen it lists my custom binary download count as 5, I understand they will see that and tell me I'm out of luck?
Click to expand...
Click to collapse
Try to reset your binary counter with a usb jig.
you could try and download the drivers again from here and see if it then connects
http://modem-techno.blogspot.com/2010/09/epic-4g-usb-driver-download.html
I also had a similar problem once with an old i9000 and what worked was doing this and then connecting the phone first and then opening Odin.For some reason opening Odin first and connecting wouldnt find the phone.If nothing else works try wipeing the bin counter with the jig and send it back.Youll have to say that kies crashed while updating on Win7 64bits.Samsung know that before the September 30th kies update kies wasnt fully functional with 64bit drivers and they had a few phones replaced under warranty because of crashing kies updates on Win7 64bits.
Thanks for the replies everyone.
I made a USB jig but it had no result. I checked the resistance with a multimeter and I am connected across pins 4 and 5 of the usb dongle I bought. I plug it in and nothing happens.
I can still get into download mode by the usual means, just no recognition from my computer, odin, or kies. Very frustrating. Am I going to have to buy a new one or is there another way to reset the bin counter?
EDIT: Got the USB jig to work! I was using a bad diagram and was on pins 1/2 instead of 4/5. Now I can't boot, can't get to recovery, can't get any PC to recognize my phone in download mode.. but at least my download screen says "Custom binary download: NO." So if nothing else works before tomorrow evening I'm gonna bring this thing back to the Sprint store and tell them what cooza said about kies crashing on win7 64 bit. Thanks everyone! Also I just realized there is a specific forum for Epic 4G touch.. sorry >.>
The good thing is that your bin counter is at "0" again.The Kies thing is the real deal as there are also posts here on XDA of the same thing happening.I also know its true from first hand experience as it has happened to me and when i told them about the Win7 64bit driver problem (this happened to me a couple of months back too) they had no option but to accept it cos they know its true.Also i offered to e-mail links from forums with other complaints from users on 64bit PCs but they didnt even dought my storey and in 4 days it was back in my hand.I told them that when the update finalized the programe froze and the phone rebooted to a black screen.Had to pull the battery cos it appeared to be dead and refused to reboot again.Important to say that you where on Kies prior to the update I mentioned.Ived update to the latest Kies and it works fine now on my Win7 64bit so be carefull there that date is important
Thanks cooza I really appreciate your help. I do have a couple questions though.
1. Is the update you are referring to an update to Kies software.. or an update to the Galaxy S2? Reason I ask is because my phone is the Epic 4G Touch (accidentally posted in this forum >.>), will they still believe my story?
2. Not sure if you will know the answer to this one, but should I go through Samsung tech support or can I take it back to the Sprint store where I bought it?
3. Just trying to get clear on the story I should tell them. I was using Kies to update my phone on a Win7 64bit computer, but I accidentally used the version of Kies from before the Sept. 30 update? And then the phone crashed resulting in it's current state. Correct? Anything else I should watch out for?
4. With the problem you are describing with Win7 x64, does the phone go into a soft brick where it won't boot up?
Thanks again.. you've been very helpful
OperationIvy85 said:
Thanks cooza I really appreciate your help. I do have a couple questions though.
1. Is the update you are referring to an update to Kies software.. or an update to the Galaxy S2? Reason I ask is because my phone is the Epic 4G Touch (accidentally posted in this forum >.>), will they still believe my story?
2. Not sure if you will know the answer to this one, but should I go through Samsung tech support or can I take it back to the Sprint store where I bought it?
3. Just trying to get clear on the story I should tell them. I was using Kies to update my phone on a Win7 64bit computer, but I accidentally used the version of Kies from before the Sept. 30 update? And then the phone crashed resulting in it's current state. Correct? Anything else I should watch out for?
4. With the problem you are describing with Win7 x64, does the phone go into a soft brick where it won't boot up?
Thanks again.. you've been very helpful
Click to expand...
Click to collapse
Kies via to its Sep 30th update was not fully compatable with 64bits and gave a lot of problems to a lot of people.I had a few problems with it when I got a new laptop (HP Win7 64bit) so started searching the web for solutions and found that kies was designed mainly to support the windowsXP versions 32bit and had caused Samsung to accept various repairs under warranty because of crashing Kies updates mainly on android running phones.For some reason Bada didnt seam to affected.Maybe cos there arnt to many around like android.In the 4G forum there is post from someone who has bricked their phone using Kies to update and a reply from another with the same problem.Take it into where you bought it to start with and if its not there problem then they might send it back to Samsung for you.All you need to say is that you where updating your firmware via kies and on completion it froze and the phone booted to a black screen like mine did.You had to pull the battery and restart your PC to close Kies cos it wouldnt close or minimize or anything.Tell them that you searched on the net for possible causes and found what i told you about Kies and since you have a Win7 64bits PC then thats most likely to have been the cause.Your bin counter is at 0 so there is no way they can counter-attack your story.
OperationIvy85 said:
Hi all. I have searched for this problem and found some similar ones, but nothing quite like this.
The problem first started when I tried flashing Zedomax Kernel v3 via Odin. Odin reported a successful flash, but when it went to reboot it sat at the Galaxy S2 splash screen with yellow triangle for about 45 mins. I figured something was wrong so rebooted to CWM. I was able to get into both CWM and download mode at this point.
No matter what I tried I could not get the phone to boot up, so I thought I would try flashing a factory image to get back to out of the box settings. In the middle of this Odin got stuck on a step and then failed out after a good 10-30 minutes (sorry for lack of detail, this was pretty late last night).
Now, when I try to boot into recovery mode I see the [phone]....!....[computer] screen with the message "Firmware upgrade encountered" (part of this screen is cut off on the right, and appears to overflow to the left side? weird). I can boot into download mode, but Odin doesn't see my phone when I plug it in. The device doesn't show up in device manager either.
Things I have tried:
-Different USB port
-Kies "Resolution connection errors" button, which seems to reinstall the drivers
-Reboot computer after above step
-Remove battery from phone and replace
After these steps I still can't get my computer to see my plugged in phone in any way. I'm getting kinda nervous but the only thing giving me hope is that I can get it into download mode. Any ideas on how to get Odin to see it again?
Click to expand...
Click to collapse
I also have this same problem now. Except that....I cannot even get into download mode. My phone is stuck at the [phone]....!....[computer] screen, but without any message. I am told that the exclamation mark tells Samsung that warranty is voided.
Is there anyway I can do anything to save my phone?
Who told you that the exclamation point means you voided your warranty?
bajaber said:
I also have this same problem now. Except that....I cannot even get into download mode. My phone is stuck at the [phone]....!....[computer] screen, but without any message. I am told that the exclamation mark tells Samsung that warranty is voided.
Is there anyway I can do anything to save my phone?
Click to expand...
Click to collapse
The exclamation point on a normal boot up screen (Galaxy S II splash screen) means there is a custom rom installed. This can be removed with a USB jig, which will also reset your custom binary counter.
I have absolutely no idea still what [phone]....!....[computer] means though. I ended up taking my phone back to the Sprint store and they replaced it for a small service charge while telling me next time I won't be so lucky. My next step was going to be to try calling Samsung with the story cooza suggested. I told that same story to the people at Sprint but they definitely didn't buy it, but you may have better luck with Samsung. If you get this resolved I'd be curious to hear how, but I am not optimistic for you
bajaber said:
I also have this same problem now. Except that....I cannot even get into download mode. My phone is stuck at the [phone]....!....[computer] screen, but without any message. I am told that the exclamation mark tells Samsung that warranty is voided.
Is there anyway I can do anything to save my phone?
Click to expand...
Click to collapse
The sign you see means that your phone is semi-bricked and that you needed a jig to force the phone to boot into download mode.You can buy one on ebay for a couple of bucks.Best you do cos it could may mean that your warranty is void.Let me explain,no one can actually say that your warranty is void because of this sign but being only "semi-bricked" the service centre are still able to enter the phone and see the bin counter.So if you semi-bricked flashing a non official firmware or you have done so earlier and your bin counter is not at 0 then YES your warranty is void.Semi-brick is not so bad as you can normally fix it yourself but Hard-brick is a dead phone and you gotta pay for a jtag .In your case buy a jig force the phone into download mode and re-flash it yourself.You shouldnt need to go anywhere.Semi-bricking is something you save yourself.Just wait till the jig arrives in the mail.
EDIT:there have been posts of people pulling the battery for 10min and re-trying and it has booted to download.They say they have had to do so 4 or 5 times for it to finally work but if youve got time on your hands then give it a try.
---------- Post added at 04:48 PM ---------- Previous post was at 04:22 PM ----------
OperationIvy85 said:
The exclamation point on a normal boot up screen (Galaxy S II splash screen) means there is a custom rom installed. This can be removed with a USB jig, which will also reset your custom binary counter.
I have absolutely no idea still what [phone]....!....[computer] means though. I ended up taking my phone back to the Sprint store and they replaced it for a small service charge while telling me next time I won't be so lucky. My next step was going to be to try calling Samsung with the story cooza suggested. I told that same story to the people at Sprint but they definitely didn't buy it, but you may have better luck with Samsung. If you get this resolved I'd be curious to hear how, but I am not optimistic for you
Click to expand...
Click to collapse
Well at least you got a phone now hope they didnt charge to much!!!!Good on ya mate
Update on my issue....
It turns out the problem is because I tried to flash an I1900 firmware while my phone is a G variant (I900G).
After using the right firmware, it worked.
OperationIvy85 said:
Thanks for the replies everyone.
I made a USB jig but it had no result. I checked the resistance with a multimeter and I am connected across pins 4 and 5 of the usb dongle I bought. I plug it in and nothing happens.
I can still get into download mode by the usual means, just no recognition from my computer, odin, or kies. Very frustrating. Am I going to have to buy a new one or is there another way to reset the bin counter?
EDIT: Got the USB jig to work! I was using a bad diagram and was on pins 1/2 instead of 4/5. Now I can't boot, can't get to recovery, can't get any PC to recognize my phone in download mode.. but at least my download screen says "Custom binary download: NO." So if nothing else works before tomorrow evening I'm gonna bring this thing back to the Sprint store and tell them what cooza said about kies crashing on win7 64 bit. Thanks everyone! Also I just realized there is a specific forum for Epic 4G touch.. sorry >.>
Click to expand...
Click to collapse
Hi, I'm having an exactly same problem with you and I just got a USB jig in mail, but even though I am following the instructions for the USB jig the counter is still not going back to 0 :/
This is the instruction I followed: take battery out for like a minute -> put the battery in but don't turn phone on -> put the usb jig in -> it's supposed to boot up with 0 flash count?
Mine still says 4... Can anyone please help?
sfoksn said:
Hi, I'm having an exactly same problem with you and I just got a USB jig in mail, but even though I am following the instructions for the USB jig the counter is still not going back to 0 :/
This is the instruction I followed: take battery out for like a minute -> put the battery in but don't turn phone on -> put the usb jig in -> it's supposed to boot up with 0 flash count?
Mine still says 4... Can anyone please help?
Click to expand...
Click to collapse
Is yours a i9100? If so is your firmware the latest 2.3.5 KI3 or KI8?
Could be your device has the new bootloader. If so check intratechs original firmware thread in original development section and install his old bootloader via Odin. Have a read while your there to get the latest info.
Good luck
Sent from my GT-I9100 using XDA App
aceofclubs said:
Is yours a i9100? If so is your firmware the latest 2.3.5 KI3 or KI8?
Could be your device has the new bootloader. If so check intratechs original firmware thread in original development section and install his old bootloader via Odin. Have a read while your there to get the latest info.
Good luck
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
Yeah, I got stuck while flashing 2.3.5 Gingerbread... Yeah I think it has a new bootloader, as I remember Odin updating the bootloader section before messing up.
Is there any way I can get the USB jig to work? My phone is no longer recognized by the USB anymore so I can't even flash another bootloader or anything.
Is there anythign I could do to make the USB jig work without connecting it to the computer?
Can you get into download mode using the buttons?
Volume down+home+power
If so try and flash another Rom from intratechs thread to get back to stock.
If that works you can try again.
Sent from my GT-I9100 using XDA App
hey everyone, im having a little trouble with my galaxy2.
its the canadian bell hd lte version, unrooted, running gingerbread 2.3.3. obviously i want to upgrade.
im comfortable with the rooting process using odin...etc.
heres my issue, ive done some looking but couldnt find anybody with the same issue or a solution.
upon attempting to enter download mode, with the phone off, using the vol down + home + pwr key, it does just that, totally skipping the "warning!" screen.
ive also found that odin will not recognize my phone, though the computer does, i am unsure if this is because of the bypass of the warning screen? maybe its time for a jig?
tldr phone will go into download mode, but odin will not recognize, no warning about custom os displayed.
thanks for looking.
Only reason I can think of for it not showing the warning screen before going directly into download mode is because you are holding down all the buttons for so long that it uses that as the "up" which it needs to go from the warning screen straight into download mode. *Like if you need to hold for 5 seconds to get into DL mode, try holding for 4.5 seconds so that you know it's booting into DL mode, but that you're certain you're not stilling holding down the UP button prematurely, so that it's going by the warning screen too quickly for you to notice -- if you really care enough at all*
What's most likely going on with ODIN not recognizing your device is that your Phone's Drivers has for some reason not installed correctly on your PC. That's not too rare of an occasion (happened to my brothers phone the other week when I tried to root it - wouldn't install drivers on my pc [thus not showing up in odin], so we had to use his computer (where they were already installed). What you can do (assuming this is the problem) is 1) Try using a different computer, and if you plug the phone in and the drivers do not start installing within the first minute and a half of connection then you can either look at the device option of windows (device and printer or w.e - see if there's an option for drivers, or uninstalling drivers [so that you can re-install] or something like that), or try downloading Kies (now used for official samsung updates), as I believe there is an option there to install your phone's drivers. Hope that helps, lemme know the results. I'm like 80% sure the problem you're having is the Drivers not being installed proplery on the comp.
dub_lyfe said:
hey everyone, im having a little trouble with my galaxy2.
its the canadian bell hd lte version, unrooted, running gingerbread 2.3.3. obviously i want to upgrade.
im comfortable with the rooting process using odin...etc.
heres my issue, ive done some looking but couldnt find anybody with the same issue or a solution.
upon attempting to enter download mode, with the phone off, using the vol down + home + pwr key, it does just that, totally skipping the "warning!" screen.
ive also found that odin will not recognize my phone, though the computer does, i am unsure if this is because of the bypass of the warning screen? maybe its time for a jig?
tldr phone will go into download mode, but odin will not recognize, no warning about custom os displayed.
thanks for looking.
Click to expand...
Click to collapse
Seems a little odd that it's skipping the warning but don't think it's a big issue.
As for the drivers I would suggest downloading the latest Kies software and installing any updates that should install all necessary drivers
I would then reboot computer and not launch Kies or anything else before opening Odin, Whenever I flash my phone I always run Odin from a fresh reboot just so I know that Kies isn't running or anything else to interfere with flashing process.
*Make sure Kies isn't running in the background when flashing things in Odin or strange things happen and flashing can get interrupted leading to possible bricked device.*
Also make sure USB debugging is enabled on your phone when you use Odin.
thanks for the reaponses!
it is wierd that its skipping the warning.
if a person puts the phone in dl mode, and at the warning screen chooses no, what happens? does the phone still go into dl mode or just reboot?
as for odin i cant check at the moment but ill try that, i have a feeling that the warning may have something to do with it, if someone wants to try to confirm my suspicions above?
will get back on the odin issue when i get a chance.
"ive done some looking but couldnt find anybody with the same issue or a solution." ... then look harder.
yea download the kies drivers or install a temporary cwm on your phone and go through that.
still have yet to get to a computer but messed with the device a bit.
it boots in recovery fine, still no warning for download mode.
also, if i dont continue to hold the dl mode button sequence till it goes straight into.dl.mode, the phone boots as normal.
so the theory of holding the buttons too long seems unlikely.
dub_lyfe said:
still have yet to get to a computer but messed with the device a bit.
it boots in recovery fine, still no warning for download mode.
also, if i dont continue to hold the dl mode button sequence till it goes straight into.dl.mode, the phone boots as normal.
so the theory of holding the buttons too long seems unlikely.
Click to expand...
Click to collapse
Alright I mean if you can get into recovery mode at this point (and download mode seems to work anyway, just doesn't give warning) shouldn't be a problem. If you do try getting the drivers from kies and use download mode then you can figure out if it's bonkers. If not, just use recovery to flash something and all should be well. That's quicker and easier anyway
Also, you should probably note that since you said you have the "canadian bell hd lte version", that you PROBABLY do not have a GT-I9100. So don't go flashing random stuff from the forum (which is for the I9100) - else I can almost guarantee you will run into problems.
(refer to this article, and this post)
If you are right about having the HD LTE version of the Galaxy S II, I'm betting you actually have the SGH-I757M. (you can verify this by looking on the label under the battery)
That phone (the SGH-I757M) doesn't have a dedicated forum, unfortunately. Your best bet is to search XDA for that model number, like this.
I was feeling generous, so I did a bit of legwork for you. The current latest Samsung official version is still 2.3.6. You can get it from sammobile.com. That will offer only minor updates from your current version of 2.3.3.
There IS the CyanogenMod9 custom ROM for your device, if you want to go that route. It'll be listed on the xda site search for your model number that I linked above.
In any case, I must warn you again against flashing anything that is meant for the i9100 Galaxy S II.
EDIT to add: the fact that the model is different from an I9100 could also explain the lack of a warning screen before download mode. There was no warning screen on my girlfriend's old Captivate prior to download mode, so maybe there isn't one on the SGH-I757M, either.
i was trying to root a phone for someone and after odin completed it said it had failed.
the phone is a telus samsung t959d running froyo.
I followed the instructions from (I would post the url for the link but i am not allowed to.)cyanogenmod's wiki, after it failed I rebooted the phone and it got stuck on the screen in the attached pic. I have tried to boot back into download mode to no avail. From the screen it's stuck on I cannot get any tool to register the device as being present, adb, heimdall, zdiag, etc... I even tried fastboot out of desperation.Before I used odin I tried to get the phone to boot into the bootloader but it only ever went to either recovery or a normal boot and I tried every button press combo I could think of and found and nada.
Even running adb reboot bootloader just made the device boot normally. I think that if I could get it to boot to fastboot usb i could then try fastboot. I am new to rooting devices and have successfully rooted my HTC EVO3D and got s-off and simlock removed for any carrier. So I do know how to follow instructions properly, why flashing the recovery.bin failed I don't know and every fix I seem to find says BOOT TO DOWNLOAD MODE. if I could do that I wouldn't be having this problem lol. Anyway can someone please help me figure this out. Thanks. ANd if you need any further info please let me know. I don't want to have to give my friend my phone due to a software issue.
And YES I did pick PDA not anything else.
machv5 said:
i was trying to root a phone for someone and after odin completed it said it had failed.
the phone is a telus samsung t959d running froyo.
I followed the instructions from (I would post the url for the link but i am not allowed to.)cyanogenmod's wiki, after it failed I rebooted the phone and it got stuck on the screen in the attached pic. I have tried to boot back into download mode to no avail. From the screen it's stuck on I cannot get any tool to register the device as being present, adb, heimdall, zdiag, etc... I even tried fastboot out of desperation.Before I used odin I tried to get the phone to boot into the bootloader but it only ever went to either recovery or a normal boot and I tried every button press combo I could think of and found and nada.
Even running adb reboot bootloader just made the device boot normally. I think that if I could get it to boot to fastboot usb i could then try fastboot. I am new to rooting devices and have successfully rooted my HTC EVO3D and got s-off and simlock removed for any carrier. So I do know how to follow instructions properly, why flashing the recovery.bin failed I don't know and every fix I seem to find says BOOT TO DOWNLOAD MODE. if I could do that I wouldn't be having this problem lol. Anyway can someone please help me figure this out. Thanks. ANd if you need any further info please let me know. I don't want to have to give my friend my phone due to a software issue.
And YES I did pick PDA not anything else.
Click to expand...
Click to collapse
I kept reading other threads and sadly I din't pully the battery first before disconnecting the usb and repartition may have been checked as I see that it does the as default for my version. Also i turned off ODIN as I was hoping a reboot of my computer might help. I will keep trying to find an answer till someone gets back to me. this post may not even show up if I can't do a second post if no one has replied first.
Everyone was a nub at one time wasn't it FUN hahahahahaha sob cry
machv5 said:
I kept reading other threads and sadly I din't pully the battery first before disconnecting the usb and repartition may have been checked as I see that it does the as default for my version. Also i turned off ODIN as I was hoping a reboot of my computer might help. I will keep trying to find an answer till someone gets back to me. this post may not even show up if I can't do a second post if no one has replied first.
Everyone was a nub at one time wasn't it FUN hahahahahaha sob cry
Click to expand...
Click to collapse
I tried a jig and that didn't work. There must be some way of getting the device to give up on completing a task i no longer can give it due to ODIN being shut off.
Why is it that the "how to root/unlocks" never have the "if x fails then do these steps etc..." Had the how to had "pull the battery before disconnecting USB and don't reset or shut off ODIN" I wouldn't be in this mess. I realize that it's user beware but a few important steps like that in case of a fail would go a long way to you guys not shaking your heads. Instead of "silly nub hahahahahaha". No offence but I get that a lot and try to remember that when I teach someone how to use a computer. I am new at phones not at everything.
Further Developments Please can someone help?
I was giving someone a new memory card and they had a Samsung SGH-I896 it has an EB575152VA battery and the one I have the T959D has an EB575152VU battery. I exchanged my battery for hers by accident somehow and when I plugged my phone in it didn't go to the phone triangle computer logo screen it booted to recovery and said it couldn't charge the battery and kept rebooting to recovery. I got my battery back and it booted back to the phone triangle computer logo again. Grrrr....
The other thing I saw while the recovery screen was an error message that said
Code:
E:/data/fota not accessible
(may not be 100% accurate I don't have the battery to check right now but can get it again if need be) anyway I now see that there may be some light at the end of the tunnel. i have the correct stock firmware for the device I tried flashing it while in recovery but the phone kept rebooting before anything got done. My question is how can I get the dang phone to stop asking for Odin and go to recovery so I can flash stock firmware and ROM back to it? As I cannot as far as I know give it what it wants because I reset Odin and nothing seems to see that the phone is connected to the computer. I am going to try the other battery on a full charge to see what that does.
I am new at all this and want to get it fixed. I cannot afford to send it off to a service center and besides that I want to do it myself as I want to become a developer and droid technician. I would gladly donate to anyone but am still trying to get Google to accept my pay-as-you-go credit card and I don't have PayPal either. Which is really frustrating when it comes to giving back. I posted a Q&A on how to without PayPal or CC but as of the last time I checked no one has gotten back to me about it.
The CyanogenMod guide is flat out WRONG. I've tried to change it, but anything I do is reverted in an instant. I also tried to use it to install the ROM only, ended up bricking my phone and it took me hours to unbrick. That's how I became acquainted with XDA.
So, to get this straight:
1. you're using the stock USB cable
2. you remove the battery
3. you hold volume down
4. you plug in the usb cable
5. after a few seconds, you release volume down
6. the screen does not display a yellow triangle with an android
Posted from my Galaxy Tab with CM10
MultipleMonomials said:
The CyanogenMod guide is flat out WRONG. I've tried to change it, but anything I do is reverted in an instant. I also tried to use it to install the ROM only, ended up bricking my phone and it took me hours to unbrick. That's how I became acquainted with XDA.
So, to get this straight:
1. you're using the stock USB cable
2. you remove the battery
3. you hold volume down
4. you plug in the usb cable
5. after a few seconds, you release volume down
6. the screen does not display a yellow triangle with an android
Posted from my Galaxy Tab with CM10
Click to expand...
Click to collapse
That is correct. If you think that my idea below is a bad one or if I downloaded the wrong firmware package please let me know and /or you have a fix that will work? ty
I have though come up with an idea that may work. I am going to charge the "wrong" battery in erm the right phone lol and then use it to trick the device into booting into recovery instead of the cellphone triangle computer (CTC, for want of a better acronym) The I896 battery ends in a V not an ? (sorry can't rem don't have it on me) from the I896 model I think it is, plugging it into USB with the power off sends it to recovery with the "battery cannot be charged " message instead of the CTC screen.
I tried it but the charge in the battery was too low and rebooted. I am hoping that with a full charge (as long as I don't power on the phone first as this will make it go to CTC logo again.
I am hoping that I can install the update.zip that I made by first unzipping the T959UVJFD_firmware.tar I downloaded then unpacked and then repacked into an update.zip as I don't think that it will read the package as a tar file and if it's not called update.zip The recovery is still stock. If I get the phone working I am not going to try unlocking and rooting it again. I will just post two separate adverts one as a carrier locked device and the other one (higher of course to cover buying the unlock from Telus) as carrier unlocked and then I will buy the unlock code if the blah blah you get the drift. sorry for rambling on.
oh and I can't rem if I said this or not, In recovery it "E:/data/fota not accessible" I don't know what that means yet I have been busy with other things and haven't looked it up yet.
Since you can get into at least some version of recovery, your bootloader is intact and you should be able to unbrick it. You ought to be able to get into download mode using a download jig. You can get one on ebay for a few bucks or you can make one yourself. There's a guide floating around here somewhere that lets you make one from a microusb cable.
Posted from my Galaxy Tab with CM10
Hey, so I was trying to flash my friend's s3, and apparently, I did something wrong which got me stuck up at odin mode.
Initially, I could hold the vol up + home + power button to go to recovery, but now, even that won't work as it would just show me
Samsung's logo and a red exclamation mark on top left corner.
I've downloaded the firmware stock and tried to flash it using odin however it just won't work.
It says "NAND Write Start!!!" and it just stops there (stuck forever). It should (as I know it) show a progress bar on my android and
on it's interface to tell how much it has been done, but as soon as I start, the progress bar instantly fills up (on my android, the blue line)
and its just stuck there.
I've tried to take out the battery, clear cache/reset factory, take out sd and sim. But it simply won't work.
It's just stuck on "Downloading....do not turn of target!!!"
I cannot even get the flash counter to reset (I don't know how, since I can only open up odin mode)
counter: 4
binary: yes
Currently, I don't even know if it's suppose to be charging or the battery is just draining out.
Region for this phone is Turkey.
Yes I've also unrooted the phone using KingoRoot (previously, when it could go into recovery) but no luck.
Note: I have searched other threads on this forum but I cannot get anywhere around even close to fix my device.
It's soft-bricked (I assume, of course it is).
Any idea how to fix this?
Odin Screenshot (since it's my first post, it won't allow me to post outside links, sigh,):
http: // i.imgur .com/eBVZ3NN . png
^^ Just been stuck there....
Meanwhile on my android, it just shows a full-blue progress bar. And that downloading do not turn of target.
UPDATE:
THE PROBLEM HAS BEEN RESOLVED. I DOWNLOADED A CUSTOM FIRMWARE, (LUCKILY, CLOCKWORK MOD WORKED, JUST HAD TO WAIT AFTER GOING TO RECOVER)
FLASHED IT THROUGH THERE, WAITED FOR IT TO INSTALL, RESTART. BAM.
Did the 'something wrong' include flashing a firmware for another model?
What does the model number in download mode read?
You can try the rescue firmware, search general forum,.
Yeah, wrong firmware I suppose
boomboomer said:
Did the 'something wrong' include flashing a firmware for another model?
What does the model number in download mode read?
You can try the rescue firmware, search general forum,.
Click to expand...
Click to collapse
I was seeing this tutorial on how to install KitKat (4.4.4) on Galaxy S3. I must've made a mistake while trying to do so.
In other words, yes, flashing a firmware for another model.
You have a hard brick, sorry.
Yeah, no.
boomboomer said:
You have a hard brick, sorry.
Click to expand...
Click to collapse
No I don't lol. The problem has been solved anyway.
Im' glad to see you didn't give up on this, and came back to let us know what was wrong
I know this could be seen as off-topic, but the reality of devices becoming bricked isn't really possible luckily, it just takes longer to get around sometimes. If the item is worth fixing, then I always say keep at it, because I've never had an android device stay stuck so far. The only thing that really went nuts and refused to work, were 2 of the Iconia A500 tablets that lost access to their memory - but this is a common hardware fault as the RAM chips break away and need reflowing before you can even format the internal memory (it cant even see the SD cards either because the RAM comes and goes - same idea as plugging/unplugging a USB drive in Windows/Linux - it just doesn't know what to believe lol).
Great forum by the way, there's so much great information on here I get lost reading
Hey guys, I'm really hoping someone can tell me of a solution Ive not though of.... So Ive got the note 3 from sprint. currently had 4.4.4. I shoulda just left wellenough alone, I realize, But I tried to flash just a modem via mobileOdin and upon reboot, it will say "recoverybooting" and then I get the blue android. Thats all. This was just over 6 hours ago I did this and Im dead in the water, Ive SEARCHED the internet high and low and there are other facing similar problems, but it seems like every mishap Ive read about EVENTUALLY gets fixed. This just will not do anthing with any button combo as far as recovery and/or download mode. I cant access download mode either. recovery never actually boots, just a forever frozen blue android.. Now, with the phone attached via usb to my PC, it DOES see it as COM7, BUT REGARDLESS what ive tried it just remains at the "recovery booting" spot then blue android until I pull the battery again. Please HELP.! IF ANYONE HAS ANY SUGGESTIONS I would be just delighted if you may have some other approaches to this matter. THANKS! Please let me know iTs DESPERATE!
Zscott87 said:
Hey guys, I'm really hoping someone can tell me of a solution Ive not though of.... So Ive got the note 3 from sprint. currently had 4.4.4. I shoulda just left wellenough alone, I realize, But I tried to flash just a modem via mobileOdin and upon reboot, it will say "recoverybooting" and then I get the blue android. Thats all. This was just over 6 hours ago I did this and Im dead in the water, Ive SEARCHED the internet high and low and there are other facing similar problems, but it seems like every mishap Ive read about EVENTUALLY gets fixed. This just will not do anthing with any button combo as far as recovery and/or download mode. I cant access download mode either. recovery never actually boots, just a forever frozen blue android.. Now, with the phone attached via usb to my PC, it DOES see it as COM7, BUT REGARDLESS what ive tried it just remains at the "recovery booting" spot then blue android until I pull the battery again. Please HELP.! IF ANYONE HAS ANY SUGGESTIONS I would be just delighted if you may have some other approaches to this matter. THANKS! Please let me know iTs DESPERATE![/QUOTE
Have you tried removing the battery for a couple of minutes ? If you have read a couple of my threads on NH7 4.4.4, once your there downgrading anything is risky. Here is a link to read http://forum.xda-developers.com/note-3-sprint/help/4-4-4-download-mode-t2877528 . Here is a link for a recovery from a hard brick, by creating a boot image and then copy and paste it on a sdcard http://www.rom-central.com/showthread.php?87-GUIDE-HOWTO-Recover-from-a-HARD-BRICK-N900V-NC2-NC4 there are several sites on this type of fix, I just can't remember where they are. However, I do have something that may help, on one of those sites there was a link for someone who has already created a SM-N900P Unbrick img for Sprint and I downloaded it just in case. Here is the link http://www.mediafire.com/download/l6q1152x5c9d4h6/N900PUnbrick my copy. From what I understand you need to format/erase your sd card then copy and paste the unbrick img to the sd card from a PC. Pull the battery and install the sdcard back in the device, then try and boot the phone into download mode. Here is another link http://forum.xda-developers.com/showthread.php?t=2439367 I have not had to do this so you will have to do a little reading to be sure.
Click to expand...
Click to collapse
The fact that it still shows up as COM is a good sign.
Get a hold of ODIN 3.07+ I had issues with ODIN 3.06.
Here are a few things to try:
1.Take the battery out and hold all the buttons that you normally would to boot into recovery. While holding all the buttons, plug in the usb cable. If it boots into download mode, awesome, just put the battery in before you flash.
2. .Take the battery out and hold all the buttons that you normally would to boot into recovery. While holding all the buttons, plug in the battery. Hopefully it will boot into download mode.
3. try different cables, remember regular micro usb cables work with the note 3.
Make sure you put the modem file in the phone slot, and the rom/system tar in the pda slot.
Best of luck
Thanks for the suggestions guys! Iguess time is just what it needed. I actually fell asleep after trying for so long, and when I woke up I decided to try once more and VOILA... It let me into download mode! Went back to stock and have since been rebuilding . ha! Thanks again