[Q] Urgent help needed! Phone refuses to boot past boot animation - Sony Ericsson XPERIA X10 Mini

Hey guys, haven't been on these forums in a longggg while
Anyway, just recently I started experiencing a terrible issue. On every boot, the phone refuses to transition from the CM7 animation to my lockscreen. The animation just keeps playing. However when I touch the screen where the bar would normally be I do feel the haptic feedback. I have rebooted several times but to no avail. CWM works though.
EDIT: Did a factory reset but to no avail?!?!
Urgent help needed >< Thanks.

Reflashing the rom may fix the problem;-)...
Sent from my U20i using XDA

skb2496 said:
Reflashing the rom may fix the problem;-)...
Sent from my U20i using XDA
Click to expand...
Click to collapse
Yep, it does, but I have to reconfigure my app2sd and the issue comes back at random.

how long have you been waiting for that?
I have once wait more than 30min. I suppose that s2e working there since that happens only after I change s2e or link2sd configurations. Not sure about that but might be a clue.
do u mean the native app2sd? or what does it move to SD(or EXT?), apx, dex, data etc?

Related

Cm7 settings force close..? [Solved]

Hi all, I have a slightly annoying problem. Whenever I boot up my phone, after about 20 seconds I get the message pop up like in the screenshot I have taken. After pressing force close it doesn't come up again, but I don't know why it does out in the first place.
I tried removing set cpu but the message still popped up. Everything seems to work ok (except the damn deep sleep without aero mode on boot) but this message box annoys me...
I am running j's cm7 with and the baseband provided with it, along with the bootloader bypass v2. I'm just wondering if any of you have ideas our know what could be causing this issue. Any help would be greatly appreciated thanks.
Screenshot: (because I can't yet post links...)
tapatalk.com/mu/cbdbb62d-28bd-0855.jpg
Sent from my X10 using XDA App
charge battery fully before installing ROM, ensure you are on J's bb 52
edit: j's ROM FC alot anyways, recommend someone elses till he fixes it
Sent from my X10 TripNMiUI using XDA Premium App
Problem solved, someone else on the forum had the same issue and the problem was that we had the 'set on boot' option selected in settings> cyanogenmod settings> performance settings> cpu settings.
Its all good now, i hope this can help someone
Sent from my X10 using XDA App

[Q] Help me with rebooting problems

Hey guys, my x10mini will reboot sometimes and sometimes not when receiving calls. And sometime it just shut down itself. After that whenever I turn on the phone it will also reboot after the lockscreen appear. Any pros can help me with this problem please. Appreciate it. Thanks
Maybe u had the cpu speed too high. Try setting it to 122/691
Sent from my X10mini using XDA Premium App
i had the same problem when i set cpu speed too high, and i couldn't do anything, it constantly rebooted, so i booted into xrec and wiped dalvik cache, and it solved the problem
But I never tweek the phone before. The phone is running stock rom. Out of the box.
Flash a new rom
gwsa said:
Hey guys, my x10mini will reboot sometimes and sometimes not when receiving calls. And sometime it just shut down itself. After that whenever I turn on the phone it will also reboot after the lockscreen appear. Any pros can help me with this problem please. Appreciate it. Thanks
Click to expand...
Click to collapse
Sent from my U20i using XDA App
I'm sorry to hear about your reboot problem.
You could check if you get the same problem using another SIM card in the phone. If you only experience reboots when receiving calls maybe it could have something to do with the SIM card.
If not you can try to reinstall the phone software using Update Service. Found here: www dot sonyericsson dot com /updateservice
BR
Johan
Sony Ericsson

[Q] Help Please - cant answer incoming calls

i have a strange problem.
have try to ask many places, change roms, clear data, wipe, formats etc.
just finishd now all the formats and installing new batista rom and same problem.
i get call, i slide to answer and no response
only after i cal out someone, then i can receive calls but only untill its start over again.
please someone help... i start to hate my mobile and its drive me crazy
thanks
galaxy S2
It sounds like you flashed a GT9100 ROM on an AT&T Galaxy S 2 (i777). If this is the case, you can go to the AT&T SGS2 forum and download the Hellraiser mod and the haptic feedback home button fix. Then boot into recovery and flash hellraiser first, then haptic fix, then reboot your device and all should be well. If you're on a GT9100, you probably have a bad install. Try performing a full wipe (data wipe, cache wipe, dalvik wipe) then re-flash the ROM again. That should take care of things. Good luck.
Semt from my Samsung SGH-i777 using XDA Premium.
hello friend and thanks alot
after few weeks i try so hard and nothing work...
yesterday i just deleted all my files and install a new system with nothing from the past
the problems not here anymore
maybe there was a problem that everythime i restore the files with titanium and the problem restored also lol
thanks alot
Please use the thanks button.
Sent from my Samsung SGH-i777 using XDA Premium
it is back...
god morning
well the problem is back... + the volume go down itself somehow even it show its on maximum...
so i missed few calls, the alarm for work and a few reminders...
that samsung just drive me crazy sometimes...
i dont know what to do and its really strange.
the thing is that i cannot sit with another mobile and just call again and again and try to see whats wrong
sometimes it answer and sometimes ot
by the way my mobile is europian one.
problem solved !!!
it was the app "flashlightAlerts 22.1"
i cant believe i didnt find that it was the problem !!!
thanks anyway

[Q] Vibrate function doesn't work anymore, hardware issue

My SGS2 stopped vibrating. Tried flashing, un-rooting, restoring stock and factory settings. None of these worked.
I am inclined to think that it is a hardware problem.
Has anyone else been dealing with issue? I read some posts on XDA regarding this matter but they were software related as opposed to hardware. Can anyone post instructions on how to fix it or provide any solutions for this issue?
If its hardware, why not flash stock, remove binary flash count with USB jig, and return for warranty?
Sent from my GT-I9100 using xda
premium
UpInTheAir said:
If its hardware, why not flash stock, remove binary flash count with USB jig, and return for warranty?
Sent from my GT-I9100 using xda
premium
Click to expand...
Click to collapse
Cannot get jig in Palestine. Bought the phone from the UK. Sending it back will be problematic. I will look for a repair shop.
Thanks for the quick reply
That's a "bummer" (bad luck). You could make a jig, but as you said that it would be problematic to return. Hope you can sort it easily. Sorry, can't think of anything of use right now.
Sent from my GT-I9100 using xda premium
hey there,
i got the same problem. no more vibrating at all. not with calls or notifications and not as haptic feedback. it started today (was still working in the morning), though i did not drop the phone or anything.
i am still hoping too find that it's a sw-problem. but all potential solutions i find do not help. so i guess i have to contact samsung.
but before i do that i have to get rid of all "hacking".
could you plz tell me what i have to do?
i have now cm9 20120402 nightly.
but i still have a cwm-recovery-backup of the original touchwiz (gingerbread).
-so first i make a backup of my current rom via cwm and of all my apps via titanium and store everything on my pc.
-i flash my touchwiz-backup
-i get one of those: http://www.amazon.de/s/ref=nb_sb_no...ld-keywords=Samsung+Galaxy+S2+USB+Jig&x=0&y=0 , plug it in, wait til its done and remove it again.
after that, samsung will never know i "messed" with the phone??
or do i have to consider/do something else?
tyvm!!
kws
I have the same issue.
When I was on my stock 2.3.5, I found a workaround:
- go into test mode (dial *#0*#)
- find the vibrate button, when you press it, it shouldn't work like you expect
- go back
- plug in your headphones and push the cable a bit to the left
- test vibrate again - this time it should work
- pull the cable out while vibrating, still pushed to the left, vibrations should stay on
I know it sounds crazy but it seems the hardware part that controls the vibrations is near to the jack port - excessive use of headphones, like it was case, must have damaged it somehow.
However, now I'm on CM9, so no test mode for me, I'm achieving the same effect by bashing the back button, so I get semi-constant vibration. I know, It's ridiculous.
Have the same problem here, I think it's software related because the shut down vibration stopped working when I flashed CM9 ICS, I can't remember if it was working anywhere else though. But now I'm back to 2.3.5 and it's not working at all. Did a Factory Reset, Cleaned Cache before and after the flash. Also used the Jig to reset my counter. Any clues?
I am experiencing the same issue.
Yesterday, I downgraded from 4.0.3 back to 2.3.5 as I was having a lot of problems with ICS. Now, my phone works fine again except for the fact that it does not vibrate anymore. (Which it did fine in 4.0.3 and before in 2.3.5)
I tried the trick Lechium06 mentioned in this thread but that did not work for me.
Anyone else having this issue? More important, anyone have a solution???
Greetinx
Johan
dajomas said:
I am experiencing the same issue.
Yesterday, I downgraded from 4.0.3 back to 2.3.5 as I was having a lot of problems with ICS. Now, my phone works fine again except for the fact that it does not vibrate anymore. (Which it did fine in 4.0.3 and before in 2.3.5)
I tried the trick Lechium06 mentioned in this thread but that did not work for me.
Anyone else having this issue? More important, anyone have a solution???
Greetinx
Johan
Click to expand...
Click to collapse
I saw something similar on CM9 thread, they said it could be a "bad flash", not a corrupted rom but the lack of proper cleanup before and after the flash. But I cleaned up everything before and after and I don't like reconfiguring the whole phone again for nothing.
it happend again.
dont recall what i did or if i did something last time at all. but it worked for over a year now. and now, my sgs2 doesnt vibrate at all, i tried all possible settings, tested with z-device and rebooted. nothing.
apprechiate any hint!
thx!!
kws
AW: [Q] Vibrate function doesn't work anymore, hardware issue
since i had that before, i ruled out a hardware issue. it happend when i played with the system settings. but as i sayed, i tried to reverse everything i did. now after i updated to 0206 and wiped cache and dalvik, still no vibration.
is there anything i could have missed?
is there a possibility to reset all settings to default without deleting all my data?
thx,
kws...
...tapatalking
kweso said:
since i had that before, i ruled out a hardware issue. it happend when i played with the system settings. but as i sayed, i tried to reverse everything i did. now after i updated to 0206 and wiped cache and dalvik, still no vibration.
is there anything i could have missed?
is there a possibility to reset all settings to default without deleting all my data?
thx,
kws...
...tapatalking
Click to expand...
Click to collapse
I assume since your posting in xda developers that you are rooted?
If so, just back up data with titanium backup app and factory reset, setup system and then restore USER apps and data only.
Sent from my GT-I9300 using xda premium
kweso said:
it happend again.
dont recall what i did or if i did something last time at all. but it worked for over a year now. and now, my sgs2 doesnt vibrate at all, i tried all possible settings, tested with z-device and rebooted. nothing.
apprechiate any hint!
thx!!
kws
Click to expand...
Click to collapse
Did you install another rom?
My vibration for example didn't work with some cm10.1 nightlies
it started in cm10.1 20130203. then i tried wipe cache and dalvik. nothing. then i updated to 0206 (wiped cache and dalvik again) > still nothing. went to bed. got up. everything ok! its vibration again! i am 100% sure, it did not work, when i left it on my desk last night. this morning, i checked for missed calls and it took a moment until i realized: i got haptik feedback back on patternunlock and keystrokes! checked ringtone-vibration: fine as well!
dont ask me how! would still like to know for myself.
thx,
kws
AW: [Q] Vibrate function doesn't work anymore, hardware issue
call me stupid!
suddenly this evening my phone stopped vibrating again. then i realized: quiet hours! i turned off haptik feedback at night.
could slap myself. at least ill find this thread again, next time i screw it again....
nite,
kws...
...tapatalking
Girls can use it again then. Good news for them!
Sent from the little guy

[SOLVED] Phone gets FC on incoming calls

Hey everybody.
My girlfriend is having a terrible problem with her new Xperia Go. It's running the latest Stock Firmware and Kernel without Root and every time she gets an incoming call, the phone won't react for about 15 seconds and then a FC Popup appears. This happens as soon she tries to answer the call. We rebooted it and it worked as it should after a fresh boot, but as soon she uses apps like Whatsapp, Facebook and so on, the problem persists and it's kinda of frustrating. A smartphone should be able to handle those things and she's really disappointed. Thinks I've tried:
-Clear data and cache of Contacts and Phone.
-Hard Reboot
-Recently installed the latest update via OTA (I hoped the problem would get fixed, but unfortunately it's still there)
-Tried using the stock launcher since she uses Nova Launcher
If someone has got an idea of what's going on please reply this post. I don't know if I should root her phone or maybe install a custom ROM. Honestly I wouldn't like to do that since she's a Noob in Android and basically in Technology Stuff. But if that's the solution, I would do that. It's really frustrating.
Thanks! Hope anybody could help
EDIT: SOLVED!
I tried to limit the background processes in developer settings and set the maximum to 4 processes and it magically solved the problem!
Moderator please delete this thread
Sent from my GT-I9305 using xda premium

Categories

Resources