Related
Hello !
I'm looking for a way to unlock my SE X10i. Apparently, there is no way to do it for free.
I've found, on some forum, people who recommend Omnius. It would cost 17euros to unlock the phone with this software.
Is there someone here who have already tried it ? Does it works ?
Thanks for your feedbacks!
versus68 said:
Hello !
I'm looking for a way to unlock my SE X10i. Apparently, there is no way to do it for free.
I've found, on some forum, people who recommend Omnius. It would cost 17euros to unlock the phone with this software.
Is there someone here who have already tried it ? Does it works ?
Thanks for your feedbacks!
Click to expand...
Click to collapse
perhaps it would help!
Finally, my phone was already unlock !!
Weird, because french phones are usually locked and you have to ask your provider the code to unlock it (free of charge after 6 months of use).
Fortunately, I tried before test Omnius. I keep the thread open, in case someone tried Omnius and can give some feedbacks.
Remember this requires firmware 2.1 and you will not be able to use any other firmware.
ferraripassion said:
Remember this requires firmware 2.1 and you will not be able to use any other firmware.
Click to expand...
Click to collapse
It is not true.
Omnius unlock = permanent unlock.
Once you unlock the phone using Omnius you can upgrade the firmware and the phone remains unlocked. Tested OK.
Xperia X8 (E15) unlocked using Omnius:
18:55 Unlock network lock by certificate replacement
15:18:55 Unlocks the phone by modifying S1 boot and recalculating simlock signature. Works for phones with Android OS version from v2.0 to v2.2.
15:18:55 Operating system: Microsoft Windows XP Professional Service Pack 3 (build 2600)
15:18:55 Application version: 0.22.3949 (beta)
15:18:55 . The action name is 'Unlock'
15:18:55 Selected phone type: E15
15:18:55 Selected connection method: USB EROM
15:18:55 i Instructions
15:18:55 i 1. Make sure the phone battery is charged to at least 50%.
15:18:55 i 2. Make sure the phone firmware version is supported! Reflash if needed!
15:18:55 i 3. Switch off the phone!
15:18:55 i 4. Remove the SIM and memory cards from the phone!
15:18:55 i 5. Remove the phone battery and wait at least 5 seconds before reinserting it!
15:18:55 i 6. Press and hold the return back button, then connect the cable to the phone!
15:18:56 . The action started waiting for the user
15:19:44 . The action finished waiting for the user
15:19:44 Connecting via SEMC USB Flash Device (USB3)...
15:19:44 Device driver version: 2.2.0.5
15:19:44 Detected chipset: MSM7227
15:19:44 Boot mode: EROM
15:19:44 EROM version: 1229-3593 R8A029
15:19:44 IMEI:
15:19:44 Device ID: 996F19F354CE3C9B4C1CF5CBACF70D758AF1015C
15:19:44 Minimum loader AID: 0001
15:19:44 Color: Red SEMC
15:19:44 Sending loader...
15:19:44 Waiting for loader response...
15:19:45 Saving data to file: E15_01244800740583_20110823131945_SIMLock.opd
15:19:45 i Waiting for connection to the server...
15:19:52 Receiving news...
15:19:54 i No news
15:19:54 Signing simlock data.
15:19:59 Writing...
15:19:59 Should anything go wrong, just restore the earliest backup...
15:19:59 i Instructions
15:19:59 i 1. Please disconnect battery and cable from the phone!
15:19:59 i 2. Remove the SIM and memory cards from the phone!
15:19:59 i 3. Switch on the phone!
15:19:59 i 4. In the phone settings select Applications/Development.
15:19:59 i 5. Then enable USB debugging.
15:19:59 i 6. Connect the cable to the phone!
15:21:44 Connecting via SEMC ADB Device...
15:21:44 Device driver version: 2.0.10.22
15:21:44 Android version: 2.1-update1
15:21:44 Uploading the root exploit file...
15:22:14 Running the root exploit...
15:22:15 Waiting for the phone to enter ADB mode.
15:22:18 Connecting via SEMC ADB Device...
15:22:18 Device driver version: 2.0.10.22
15:22:18 Uploading TA application...
15:22:20 Running the TA application...
15:22:21 Waiting for the phone to enter ADB mode.
15:22:37 Connecting via SEMC ADB Device...
15:22:37 Device driver version: 2.0.10.22
15:22:37 Running the root exploit...
15:22:38 Waiting for the phone to enter ADB mode.
15:22:42 Connecting via SEMC ADB Device...
15:22:42 Device driver version: 2.0.10.22
15:22:42 Writing S1 boot.
15:23:17 s Successfully done.
15:23:17 . The action entered shutdown phase
15:23:17 . The action reported success
Click to expand...
Click to collapse
I have a X10minipro (U20a) with the M76XX-TSNCJOLYM-53404015 baseband, latest (2.1.1.A.0.6) firmware - just updated/repaired using PC Companion.
I just tried to flash Cm7.1.0 RC1 FXP028's kernel in this phone (first step of the install guide, http://forum.xda-developers.com/showthread.php?t=1212949), but it won't boot. It doesn't even display any logo at all (no FXP logo, nor Sony Ericsson logo). After pressing the power button, I can feel the usual little vibration it makes when powering up. After that, the phone gives no other life sign - the screen just keeps black forever.
I'm not sure, but when the usb cable is connected, it appears that the phone enters into some sort of loop in and out of flash mode. The green LED blinks shortly and I can see the usb device being detected as the flash mode device (eg. on lsusb) for a short period of time. And I haven't pressed the back button at all.
Of course, flashing back the stock kernel unbricks the phone.
The bootloader was unlocked using msm7227_semc. Just to be sure it was unlocked correctly, I flashed D4Kernel v1.2 (http://forum.xda-developers.com/showthread.php?t=1254202), and it worked like a charm. So the bootloader appears to be working well.
Does anybody have an idea of what is going on? Maybe I was expected to flash another version of the baseband?
If you got FXP kernel to work in your phone, please tell me if you can see any difference between your phone and mine (versions, etc.)
I found it strange that U20_CUSTOM.ftf, when opened using flashtool, shows "E10" in the column "Device". But perhaps this is just a typo.
Additional info (s1tool output):
Code:
RUNNING S1_EROM VER "r8A029"
SOFTWARE AID: 0001
LOADER AID: 0001
FLASH ID: "0020/00BC"
LOADER VERSION: "r4A060"
MODEL (from GDFS): U20a
SOFTWARE VERSION: 1235-3408_2.0.A.0.504
CUSTOM VERSION: 1238-8213_R6B
FILESYSTEM VERSION: WORLD-1-2-5_2.1.1.A.0.6
SERIAL NO: BY9008UWWE
SEMC SIMLOCK CERTIFICATE
Thank you
Have you discovered the problem yet ? I have a similiar problem and how can you reflash the stock kernel if it doesn't even turn on or connect with computer ?
thotypous said:
I have a X10minipro (U20a) with the M76XX-TSNCJOLYM-53404015 baseband, latest (2.1.1.A.0.6) firmware - just updated/repaired using PC Companion.
I just tried to flash Cm7.1.0 RC1 FXP028's kernel in this phone (first step of the install guide, http://forum.xda-developers.com/showthread.php?t=1212949), but it won't boot. It doesn't even display any logo at all (no FXP logo, nor Sony Ericsson logo). After pressing the power button, I can feel the usual little vibration it makes when powering up. After that, the phone gives no other life sign - the screen just keeps black forever.
I'm not sure, but when the usb cable is connected, it appears that the phone enters into some sort of loop in and out of flash mode. The green LED blinks shortly and I can see the usb device being detected as the flash mode device (eg. on lsusb) for a short period of time. And I haven't pressed the back button at all.
Of course, flashing back the stock kernel unbricks the phone.
The bootloader was unlocked using msm7227_semc. Just to be sure it was unlocked correctly, I flashed D4Kernel v1.2 (http://forum.xda-developers.com/showthread.php?t=1254202), and it worked like a charm. So the bootloader appears to be working well.
Does anybody have an idea of what is going on? Maybe I was expected to flash another version of the baseband?
If you got FXP kernel to work in your phone, please tell me if you can see any difference between your phone and mine (versions, etc.)
I found it strange that U20_CUSTOM.ftf, when opened using flashtool, shows "E10" in the column "Device". But perhaps this is just a typo.
Additional info (s1tool output):
Code:
RUNNING S1_EROM VER "r8A029"
SOFTWARE AID: 0001
LOADER AID: 0001
FLASH ID: "0020/00BC"
LOADER VERSION: "r4A060"
MODEL (from GDFS): U20a
SOFTWARE VERSION: 1235-3408_2.0.A.0.504
CUSTOM VERSION: 1238-8213_R6B
FILESYSTEM VERSION: WORLD-1-2-5_2.1.1.A.0.6
SERIAL NO: BY9008UWWE
SEMC SIMLOCK CERTIFICATE
Thank you
Click to expand...
Click to collapse
The kernel that comes with CM 7.1 is broken, you need to use a older version of FXP, there's one in the mini pro dev and flash the just the kernel but I can't find the kernel any were for the mini pro, the mirrors come up as X8. I've been told that it still has bugs.
Sent from my U20i using xda premium
henzx said:
Have you discovered the problem yet ? I have a similiar problem and how can you reflash the stock kernel if it doesn't even turn on or connect with computer ?
Click to expand...
Click to collapse
As danlivesey said, the custom kernel from FXP is broken. When I posted this, nobody had complained yet (people complained only when they released FXP030), so I thought I was doing something wrong.
To reflash the stock kernel, download "X10 mini pro (U20) stock kernel" from this thread: http://forum.xda-developers.com/showthread.php?t=1254225
Then use flashtool to flash the ftf file. You should be able to put your phone in flash mode. If your are not able, probably it is stuck frozen trying to boot, then just remove the battery and insert it again and follow the procedure again (keeping the back button pressed and inserting the USB cable).
Hi there
I have a strange problem...
When i try to get into fastboot mode phone turns into charging mode (green light)
Phone has unlocked bootloader by testpoint
Code:
2012-03-13 18:12:24 RUNNING S1_EROM VER "r9A021"
2012-03-13 18:12:24 SOFTWARE AID: 0001
2012-03-13 18:12:24 LOADER AID: 0001
2012-03-13 18:12:26 FLASH ID: "002C/00B3"
2012-03-13 18:12:26 LOADER VERSION: "r4A069"
2012-03-13 18:12:26
2012-03-13 18:12:26 MODEL (from GDFS): MT11i
2012-03-13 18:12:26 SOFTWARE VERSION: 1253-8237_4.0.2.A.0.42
2012-03-13 18:12:26 CUSTOM VERSION: 1254-8478_R2D
2012-03-13 18:12:26 FILESYSTEM VERSION: WORLD-i_4.0.2.A.0.42
2012-03-13 18:12:26 SERIAL NO: BX902TVEWU
2012-03-13 18:12:26
2012-03-13 18:12:26 SEMC SIMLOCK CERTIFICATE
2012-03-13 18:12:26 Elapsed:37 secs.
This phone is brand new (OrangePL Branded)
Any one have any idea what's going on?
try holding down the back button when you plug in the usb?
Dice1212 said:
try holding down the back button when you plug in the usb?
Click to expand...
Click to collapse
By holding back button you go in flash mode!
For fastboot mode, on swiched off phone, you must hold down menu button and plug in USB cable!
Phone turned off, battery in -> Press and HOLD MENU BUTTON -> Attach Usb CABLE = Battery Charging with green led
wait, you say your phone is OrangePL branded. is it locked on your network? meaning you can't use any SIM card?
Yes, I can't use any other sim card except Orange's one
meciu99 said:
Yes, I can't use any other sim card except Orange's one
Click to expand...
Click to collapse
There's your problem. Your fastboot is locked. Branded phones have fastboot locked.
You will need to pay to unlock fastboot. Find someone who have setool box.
You phone has a firmware .42, why you need fastboot? Yust root by doomlord and install CWM recovery!
Cos I wanted to install custom ICS kernel + ICS AOSP
Now I have the same problem :S after flashing jj's hybrid rom tho my fastboot was working fine before need to solve this...and my neo went to fastboot from holding down the back button before this happened.
Ok I solved my problem now my neo goes in to fastboot from the menu button...strange cuz it used to go into fastboot from the back button b4
I think ur phone not already boot loader unlock. U should first download and install with fastboot with Android USB file.rar.
Code:
http://www.mediafire.com/?h4sf10doc6zgu7h
And then, u should need to do boot loader unlock.
Check This Link :
Code:
http://unlockbootloader.sonymobile.com/
And then, u should do ur phone to root.
Check This Link:
Code:
http://forum.xda-developers.com/showthread.php?t=1431033
After that u can install custom rom and kernel what u want.
Enjoy.
@ ppaphyo: please read before you say something. his bl is unlocked, problem is in locked fastboot.
I am also not able to see fastboot screen. I rooted my phone, can you help me pls ?
karthicvkn said:
I am also not able to see fastboot screen. I rooted my phone, can you help me pls ?
Click to expand...
Click to collapse
Fastboot is not a screen its a mode..!
Inorder to enter fastboot switch off phone,press and hold down menu button and attach USB cable..
Cheers..!
i think i have done earlier for unlocking my bootloader !!!, my question is how can i flash a file zip ?, that we need to go on fastboot mode right ?
i tried with holding "volume -" and "power key", not work for me. am i trying on right way ?
abirokz said:
Fastboot is not a screen its a mode..fastboot mode can be entered only by unlocking the bootloader..!
Inorder to enter fastboot switch off phone,press and hold down menu button and attach USB cable..
Cheers..!
Click to expand...
Click to collapse
Who mentions volume
Sent from my MT15i using Tapatalk 2 Beta-3
i think i need to install recovery tool !!!
abirokz said:
fastboot mode can be entered only by unlocking the bootloader..!
Click to expand...
Click to collapse
No!
Fastboot can be entered without unlocking bootloader.
People, before giving advices, inform yourself first, about differences between locked/unlocked fastboot and locked/unlocked bootloader.
@karthicvkn:looks like you are new to all this stuff, so I suggest you go and read few sticky threads, also there are few good sticky threads in xperia Arc section, check them.
Madfysh said:
No!
Fastboot can be entered without unlocking bootloader.
People, before giving advices, inform yourself first, about differences between locked/unlocked fastboot and locked/unlocked bootloader.
Click to expand...
Click to collapse
My mistake..Thanks
check this first:
http://forum.xda-developers.com/showthread.php?t=878786
But check also this one for the sim lock...
http://forum.xda-developers.com/showthread.php?t=1565124
anybody know what the problem is? i can connect to it with flash tool and it will flash sucessfully but wont turn on, vibrates once and thats it?
JaffaTB said:
anybody know what the problem is? i can connect to it with flash tool and it will flash sucessfully but wont turn on, vibrates once and thats it?
Click to expand...
Click to collapse
Are you sure that you've flashed ftf for Mini Pro? If you have unlocked bootloader you can try to install any custom kernel for Mini Pro to see that it isn't hardware related.
think the bootloader is locked as the phone is locked on a network, the screen is working fine as i have just swapped circuit boards over from my other phone and its ok, i bought this phone as not working anyway so i dont know what the problem is with it, i do know its the exact same problem as my sisters x10 mini pro (no LED, can connect fine to PC, but doesnt start up just vibrates once)
JaffaTB said:
anybody know what the problem is? i can connect to it with flash tool and it will flash sucessfully but wont turn on, vibrates once and thats it?
Click to expand...
Click to collapse
oh.have you unlocked the bootloader?
if not,go to pc companion and select fix phone.and follow the on-screen instructions.
i had the same problem with my xperia x8.it should work.you can atleast try
Which ftf did you flash? The 4.0.2.A.0.42 for xperia mini pro?
Did you use this rom and flashed in in flashmode?
Are you sure bootloader is locked? If it is unlocked, you could flash the stock gb kernel from sony and then install the rom, but only if you have an unlocked bootloader!
JaffaTB said:
anybody know what the problem is? i can connect to it with flash tool and it will flash sucessfully but wont turn on, vibrates once and thats it?
Click to expand...
Click to collapse
Did you manage to solve the problem? I have a very similat issue, I am looking for suggestions...
thanks
this is the output of s1tool
19.01.2014 12:53:28 RUNNING S1_EROM VER "R8A027"
19.01.2014 12:53:28 SOFTWARE AID: 0001
19.01.2014 12:53:28 LOADER AID: 0001
19.01.2014 12:53:30 FLASH ID: "00EC/00BC"
19.01.2014 12:53:30 LOADER VERSION: "R4A045"
19.01.2014 12:53:30
19.01.2014 12:53:30 MODEL (from GDFS): U20i
19.01.2014 12:53:30 SOFTWARE VERSION: 1235-3411_2.1.1.C.0.0
19.01.2014 12:53:30 CUSTOM VERSION: 1238-7168_R5B
19.01.2014 12:53:30 FILESYSTEM VERSION: WORLD-1-8_2.1.1.C.0.0
19.01.2014 12:53:30 SERIAL NO: CB511KWV7E
I have a strange bootloop, i press ON button and quick a green led lights up and phone vibrate, then in 6-7 seconds Sony Ericsson appears on the screen, after 22-24 seconds the screen goes black and the Led green lights up again with another boot attempt and so on.
I managed to update my phone to latest version with SEUS without any errors. Then i tried Repair option from PC Companion also success without errors but still on permanent Bootloop.
I also flashed "X10i_3.0.1.G.0.75_GLOBAL-GGL_GENERIC_1232-9897.ftf" with Flashtool and all went OK. still no luck with that bootloop
I'm running out on ideas, anyone a good advice for me? Can it be a hardware issue?
Download and install Flashtool (search in Development section) and install some recovery i.e. Xrecovery. After SE logo appears, keep pushing back button until recovery is shown.
Once in, do a full wipe, format cache partition and wipe dalvik cache also.
It must help
HeliumX10 said:
Download and install Flashtool (search in Development section) and install some recovery i.e. Xrecovery. After SE logo appears, keep pushing back button until recovery is shown.
Once in, do a full wipe, format cache partition and wipe dalvik cache also.
It must help
Click to expand...
Click to collapse
If you do a full wipe then the rom gets wiped, by the sounds of it it hasn't installed the rom correctly hence after se logo it goes black try what was said above then try a fresh repair again and see if it works if not then a custom rom installation will have to be done
Sent from my Flying MM X10 using xda premium
I downloaded Flash Tool, and try to install xRecovery but with no luck:
steps like this:
1 Open SEUS and updated my phone (no errors)
2 start my X10 and bootloop occurred
3 Open FlashTool and flashed Download Kernel (no errors)
4 disconect phone, start and when it vibrates I plug-in USB
5 - This is the end because the phone does not appear in FlashTool in order to perform Root.
Without root no xRecovery
What am I doing wrong? Are there methods to install xRecovery, from flash-boot mode?
Step by step with pictures:
1 Open SEUS and updated my phone (no errors)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2 start my X10 and bootloop occurred
3 Open FlashTool and flashed Download Kernel (no errors)
4 disconect phone, start and when it vibrates I plug-in USB
5 - This is the end because the phone does not appear in FlashTool in order to perform Root.
Without root no xRecovery
What am I doing wrong? Are there methods to install xRecovery, from flash-boot mode?
So after repair does the phone boot at all? It can take sometime after a repair for the phone to boot up
Just to add here is the full method of what you need for rooting here http://forum.xda-developers.com/showthread.php?p=16212639 hope that steers u in the right direction
Sent from my Flying MM X10 using xda premium
dunc4n88 said:
So after repair does the phone boot at all? It can take sometime after a repair for the phone to boot up
Just to add here is the full method of what you need for rooting here http://forum.xda-developers.com/showthread.php?p=16212639 hope that steers u in the right direction
Sent from my Flying MM X10 using xda premium
Click to expand...
Click to collapse
I try this metod but i can't enable Unknown Sources & USB debugging. After repair the phone is in bootloop. So phone get's recognized as X10 but it say that Unknown Sources & USB debugging are not enabled.
It sounds like every time it downloads the repair rom its always corrupted try if you can on another.computer to repair it and see if it repairs
Sent from my Flying MM X10 using xda premium
OK, are you able to got phone into Flash mode (green light)? Because I think you are having some issues with it...
If yes, you can flash some prerooted kernels, and then isntall xrecovery.
HeliumX10 said:
OK, are you able to got phone into Flash mode (green light)? Because I think you are having some issues with it...
If yes, you can flash some prerooted kernels, and then isntall xrecovery.
Click to expand...
Click to collapse
Can you point me to a prerooted stock based Kernel? I am able to flash with flashtool but i have locked bootloaders so only Stock based kernel will work for me.
Is there a way to unlock bootloaders from flash mode, with a testpoint?
dunc4n88 said:
It sounds like every time it downloads the repair rom its always corrupted try if you can on another.computer to repair it and see if it repairs
Sent from my Flying MM X10 using xda premium
Click to expand...
Click to collapse
I try on 2 diferent computers and the same thing hapends.
How can I "Enable USB Debugging" if i can't boot my phone?
Every Root method that I find here require USB Debugging Enabled.
bootloaders are locked:
13.11.2012 22:57:07 RUNNING S1_EROM VER "R8A013"
13.11.2012 22:57:07 SOFTWARE AID: 0001
13.11.2012 22:57:07 LOADER AID: 0001
13.11.2012 22:57:09 FLASH ID: "002C/00B3"
13.11.2012 22:57:09 LOADER VERSION: "R4A024"
13.11.2012 22:57:09
13.11.2012 22:57:09 MODEL (from GDFS): X10i
13.11.2012 22:57:09 SOFTWARE VERSION: 1227-4612_2.1.A.0.435
13.11.2012 22:57:09 CUSTOM VERSION: 1232-9897_R8B
13.11.2012 22:57:09 FILESYSTEM VERSION: WORLD-1-4-8_2.1.A.0.435
13.11.2012 22:57:09 SERIAL NO: CB511KCEWG
13.11.2012 22:57:09
13.11.2012 22:57:09 SEMC SIMLOCK CERTIFICATE
I need to put a recovery on my phone. Please help.
ciuc007 said:
How can I "Enable USB Debugging" if i can't boot my phone?
Every Root method that I find here require USB Debugging Enabled.
bootloaders are locked:
13.11.2012 22:57:07 RUNNING S1_EROM VER "R8A013"
13.11.2012 22:57:07 SOFTWARE AID: 0001
13.11.2012 22:57:07 LOADER AID: 0001
13.11.2012 22:57:09 FLASH ID: "002C/00B3"
13.11.2012 22:57:09 LOADER VERSION: "R4A024"
13.11.2012 22:57:09
13.11.2012 22:57:09 MODEL (from GDFS): X10i
13.11.2012 22:57:09 SOFTWARE VERSION: 1227-4612_2.1.A.0.435
13.11.2012 22:57:09 CUSTOM VERSION: 1232-9897_R8B
13.11.2012 22:57:09 FILESYSTEM VERSION: WORLD-1-4-8_2.1.A.0.435
13.11.2012 22:57:09 SERIAL NO: CB511KCEWG
13.11.2012 22:57:09
13.11.2012 22:57:09 SEMC SIMLOCK CERTIFICATE
I need to put a recovery on my phone. Please help.
Click to expand...
Click to collapse
what happens when you flash 2.3 aro ? does it boot? and when did these problems start?
With aro stil in bootloop. All started when my brothen mess with it and then give to a friend of him to restore bootloaders to lock state.
Sent from my Xperia Neo V using Tapatalk 2
ciuc007 said:
Can you point me to a prerooted stock based Kernel? I am able to flash with flashtool but i have locked bootloaders so only Stock based kernel will work for me.
Click to expand...
Click to collapse
Yes, you can doit. In both ways - with testpoins and also with flashtool. You`d probably rather prefer a flashtool method, cause I guess that you dont have JTAG box and cables for X10i.
If you connect your X10i to computer, turnit on. Open Flashtool and go to plugins -> unlock bootloader. Its the easiest method that exists, ut you must have stock kernel (which you have).
ciuc007 said:
Is there a way to unlock bootloaders from flash mode, with a testpoint?
Click to expand...
Click to collapse
Ok, there were some, I`ll search for some for you. If unlock method fail.
HeliumX10 said:
Yes, you can doit. In both ways - with testpoins and also with flashtool. You`d probably rather prefer a flashtool method, cause I guess that you dont have JTAG box and cables for X10i.
If you connect your X10i to computer, turnit on. Open Flashtool and go to plugins -> unlock bootloader. Its the easiest method that exists, ut you must have stock kernel (which you have).
Ok, there were some, I`ll search for some for you. If unlock method fail.
Click to expand...
Click to collapse
I see nothing in Plugins (probably because it say "Phone connected with USB Debugging off"). When i connect my NEO V Unlock button works (but phone has USB debugging on)
I don't have JTAG box, only USB cable. I have Stock kernel because last flash i did was a repair from SEUS.
Pictures with X10 connected and with Neo V connected.
Anyone has a way to flash a prerouted rom from Flashtool?
As I see there is no solution - prerooted kernels also requires usb debugging... Also Azuzu kernel method requires this.
So, only way is to check the boot logcat. On some roms the logcat runs during boot even without usb debugging - check it. On PC command line - connect phone with USB and type "adb logcat" and turn on phone.
If you wont have any output, I am afraid there is no solution for that. If ROM is not rooted...