Hi, I just flashed my X10 Mini Pro to MiniCM7 Pro V21. I have kernel from this thread: http://forum.xda-developers.com/showthread.php?t=1201116
And now when I try to turn on wifi there's only "error".
I have readed this: http://forum.xda-developers.com/showthread.php?t=1450511#21507954 but I don't have wpa_supplicant.conf file in /data/misc/wifi/. What should I do?
Sorry for my english
This ROM is for stock kernel....
Did you flashed any other kernel??? or using stock kernel only
I have this - 2.6.29.6-perf [email protected] #1. I downloaded it on MiniCM7Pro thread.
Where can I download stock kernel?
factory reset in sues should help.. then u get a stock kernel.. later do this same what u already done again but without flashing kernel.. good luck and enjoy your new rom...
Related
hello ,
i have a X10 mini with miniCM7 2.1.6 firmware and nAa kernel 07 and i have many problem with this rom and this kernel so i would like to restore the SE original kernel and ROm . WHAT SHOULD I DO , help me plz ????
thx
just flash it with flashtool or SEUS, many threads that explain that
how ?? if i flash the stock kernel with flashtool i can 't access to xrecovery or cwm to do the update zip (=install the stock ROM )....
can i use directly http://forum.xda-developers.com/showthread.php?t=1228295 ??
download this and flash with flashtool
problem solved
i will try this i hope it will work !
this download is a kernel or rom or rom+kernel ?
thx for you , GOOD job
If that doesn't work try this. Tutorial made by Emperor.dk so thank him.
HooLIMAN87 said:
If that doesn't work try this. Tutorial made by Emperor.dk so thank him.
Click to expand...
Click to collapse
Not that I ever would go back to stock rom
But I thanked you for helping.
Sent from my E10i using xda premium
I'm using nAa kernel v0.9 and his rom CM7 2.1.7 for x10 mini pro, best rom and kernel for our little phones
SEUS (Sony Ericsson Update Service) is possibly the simplest to go back to stock as you don't have to worry about downloading the right rom and kernel and all of that. Just install, run and have a cup of coffee while you wait.
It doesn't root or install CWM though.
By the way, what problems are you having with the rom and kernel?
Ticklefish said:
SEUS (Sony Ericsson Update Service) is possibly the simplest to go back to stock as you don't have to worry about downloading the right rom and kernel and all of that. Just install, run and have a cup of coffee while you wait.
It doesn't root or install CWM though.
By the way, what problems are you having with the rom and kernel?
Click to expand...
Click to collapse
I was wondering that to..
Usually a simple wipe or maintanence does the trick..
Kaminek said:
i will try this i hope it will work !
this download is a kernel or rom or rom+kernel ?
thx for you , GOOD job
Click to expand...
Click to collapse
that is rom+kernel, just flash it
Kaminek said:
hello ,
i have a X10 mini with miniCM7 2.1.6 firmware and nAa kernel 07 and i have many problem with this rom and this kernel so i would like to restore the SE original kernel and ROm . WHAT SHOULD I DO , help me plz ????
thx
Click to expand...
Click to collapse
Stock!!! Whz would someone wanted to go back on stock?
Have you try minicm7 2.1.7 + nAa 09 kernel ??
I just flashed to miniCM 2.1.7 + nAa-09. Very satisfied! as I always am with MiniCM
Feel-good-story:
I was in the process of buying a new phone about a half a year ago when I decided to try a custom rom (miniCM). After that I felt like I got my new phone, and it's still going strong...
I actually think I would rather use my old Nokia 6100 instead of a X10 mini with stock rom!
How can I get to an other ROM or to stock.
On my Xperia x10 mini pro.
I have the CM9 ICS created of Paul-xxx Beta 3.
An unlocked bootloader, and the SEMC kernel who Paul-xxx created.
When I try to make a wipe data/factory reset on CMW it can't completed it.
It says:
Code:
E:formet_volume: make_extf4fs failed on /dev/block/mmcblk0p2
I can't install ROM's, when i reboot the I am don't coming to the bootanimation.
I can't use the Update service it doesn't work, and PC Companion think my phone is a X10 and a update phone doesn't display.
Please help me
P.S sorry for my bad english.
try using flashtool with latest stock ftf files
Thanks, but it don't work now either.
I was downloading Update Service again, but then I install it an other place.
It worked, after trying to open it many times.
I will not use the CM9 ICS before the Wifi is fixed...
Sorry for my bad English
Kernel
I was trying again with the nAa Kernel.
It can't wipe data/factory reset now either.
But when I install Fa kernel, then it can do a wipe data/factory reset.
I have now the Semc Debrand Engine ROM, then the screen sometimes goes green. But it goes back again after that
I will try th Fa kernel on the CM9 ICS to tomorrow.
Sorry for my bad English
i m also using semc debrand engine,but with nAa kernel and working fine for me
Test on CM9 ICS V01 KANG
Hello!
Today I was trying the CM9 ICS on my phone with Fa kernel.
It works perfect but I don't have Wifi.
I don't know if this is a ROM bug or the kernel fall.
If somebody knows why the nAa kernel doesn't work on my phone comment please. I was unlocking my bootloader with Lord AIO Tool.
Sorry for my bad English
Kernel
I use the SEUS to get back to Stock.
When I was flashing the nAa kernel the it never comes to the Sony Ericsson screen. Do anybody know how I can use the nAa kernel without trouble?
Now I gonna go back to Stock.
I am waiting for the Miui form Paul-xxx.
I hope it gonna be using without kernel.
P.S sorry for my bad English
Error
I install the new rom Cyanogenmod 9 and I didnt install kernel and now I cant turn on the mobile or turn on the clockwork mod to reinstall... can anyone please help I am really desperate
SEUS Help
Stue97 said:
I install the new rom Cyanogenmod 9 and I didnt install kernel and now I cant turn on the mobile or turn on the clockwork mod to reinstall... can anyone please help I am really desperate
Click to expand...
Click to collapse
Try to use the Sony Ericsson Update Service.
You can download it from here.
Download
There can you get back to stock and then install the CM9 or Miui v4 or an other ROM.
Enjoy
P.S Sorry for my bad English
Good day everyone.
I accidentally flashed MiniCM9 on my X10 Mini.
nAa's thread in X8 forum said "MiniCM9 is built for the X8 / x10mini / x10minipro range", but in fact it only works on X8.
I was able to re-flash nAa's v11 kernel for X10 Mini back using Flashtool.
But the problem now is, how do I flash a ROM using Flashtool?
I tried to re-flash the latest MiniCM7 RAR file, but Flashtool cannot read the file.
Can anyone direct me to a ROM file for X10 Mini that Flashtool can detect?
I can't find any link(s) to X10 Mini ROMs using Flashtool.
EDIT:
BTW, do I need to flash a stock kernel instead of nAa's custom kernel?
In that case, can anyone re-direct me to the download links for X10 Mini stock kernel flashable via Flashtool?
Thanks.
entropy96 said:
Good day everyone.
I accidentally flashed MiniCM9 on my X10 Mini.
nAa's thread in X8 forum said "MiniCM9 is built for the X8 / x10mini / x10minipro range", but in fact it only works on X8.
I was able to re-flash nAa's v11 kernel for X10 Mini back using Flashtool.
But the problem now is, how do I flash a ROM using Flashtool?
I tried to re-flash the latest MiniCM7 RAR file, but Flashtool cannot read the file.
Can anyone direct me to a ROM file for X10 Mini that Flashtool can detect?
I can't find any link(s) to X10 Mini ROMs using Flashtool.
EDIT:
BTW, do I need to flash a stock kernel instead of nAa's custom kernel?
In that case, can anyone re-direct me to the download links for X10 Mini stock kernel flashable via Flashtool?
Thanks.
Click to expand...
Click to collapse
just install MiniCM7 via cwm after u flash the nAa kernel.. but u must wipe data/factory reset first.. then install zip from sd card.. navigate where u put the cm7 .zip file
SOLVED!
After flashing the nAa kernel, I was able to access CWM via holding Back button after reboot.
I was able to restore a NANDROID backup of MiniCM7 (I made sure to backup before flashing to MiniCM9 )
Now everything's back in working condition.
entropy96 said:
SOLVED!
After flashing the nAa kernel, I was able to access CWM via holding Back button after reboot.
I was able to restore a NANDROID backup of MiniCM7 (I made sure to backup before flashing to MiniCM9 )
Now everything's back in working condition.
Click to expand...
Click to collapse
glad to hear.. no thanks button?? haha
So I am currently using slade's Zombie kernal and GinTonic rom on my x10 mini pro.
Sorry if this has already been asked but I want to switch over to nAa's MiniCM9.
Whats the best way to do it? Do I need to revert back to stock first? Should I flash the kernal first, then the rom?
Do I need to update CWM? Currently on CWM v 3.2 (Haven't flashed nor switched rom's etc in a long time)
confuserr said:
So I am currently using slade's Zombie kernal and GinTonic rom on my x10 mini pro.
Sorry if this has already been asked but I want to switch over to nAa's MiniCM9.
Whats the best way to do it? Do I need to revert back to stock first? Should I flash the kernal first, then the rom?
Do I need to update CWM? Currently on CWM v 3.2 (Haven't flashed nor switched rom's etc in a long time)
Click to expand...
Click to collapse
You don't need to revert to stock first.
You flash the kernel first, it is pre-loaded with the latest CWM.
At first boot off the new kernel, go into CWM and install MiniCM9.
that's it really
i dont know why my touch screen now dont work anymore.. im using custom rom and unlock bootloader..i've not encounter this so far.. help me to find this solution
delmarz said:
i dont know why my touch screen now dont work anymore.. im using custom rom and unlock bootloader..i've not encounter this so far.. help me to find this solution
Click to expand...
Click to collapse
Flash Stock ROM..
May be the problem is with the touch screen drivers..
Tell us exactly, WHICH custom ROM did you install. Which version and for which phone.
may b u flashed wrong rom try to reflash the rom of mini pro (mango)
Just Try This
delmarz said:
i dont know why my touch screen now dont work anymore.. im using custom rom and unlock bootloader..i've not encounter this so far.. help me to find this solution
Click to expand...
Click to collapse
First you flash latest stock rom (.62) via flash tool.
If it is not working then
first flash x kernel via flashboot mode in flash tool
install ROM (hybrom v10) via CWM.
After that install ROM (hybrom v12) via CWM without wiping any data, cache partition and dalvik cache.
hope it will help you to solve this touchscreen problem.
@jk347.. can u upload the hybrom v10 since hybrom now is closed
@someguy.. im using realics v4 for xperia mini pro (mango)
guys can you upload via flash the touch screen drivers? if possible?
Best of Luck
here is the link for downloading hybrom v10 for mini pro
https://dl.dropbox.com/u/61884099/hybrom_v10.zip
best of luck !!!
flash x kernel for hybrom
delmarz said:
@jk347.. can u upload the hybrom v10 since hybrom now is closed
@someguy.. im using realics v4 for xperia mini pro (mango)
guys can you upload via flash the touch screen drivers? if possible?
Click to expand...
Click to collapse
x kernel for mini pro
http://dl.dropbox.com/u/28961326/kernel/kernel_mango-v4.zip
thanks jk347.. btw you also encountered this matter before? should i try hybromv17 instead of v10? why is it v10 not the latest one which is v17 ?
EDIT: could you please upload stock rom .62? coz mine is .42 is it ok to flash even if not .62?
I encountered error when flashing .62 --> never got success. But nothing problem when flashing .42. :beer:
Sent from my SK17i using xda app-developers app
when I flashing hybrom v17 in .42 gets stuck in sony logo.. can u upload guys the stock rom of .62 ftf files?
Hybrom requires unlocked bootloader and custom kernel to run.
For stock firmware files, check my signature link.
@someguy.. yes i already unlocked bootloader .. and use xkernel for the hybromv17.. since I used .42 when i flash xkernel and install custom kernel gets stock at logo.. but when I used .62 it works..now i dont see any .62 ftf here for mini pro ..
delmarz said:
@someguy.. yes i already unlocked bootloader .. and use xkernel for the hybromv17.. since I used .42 when i flash xkernel and install custom kernel gets stock at logo.. but when I used .62 it works..now i dont see any .62 ftf here for mini pro ..
Click to expand...
Click to collapse
so you are searching for .62 firmware for mini pro ?
this thread http://forum.xda-developers.com/showpost.php?p=27376024&postcount=3 has all firmware you need
@pahazax.. is it ok to use .62 in sk17a? since my phone is sk17i?