Related
Hi,
I just thought to start a thread for people that own the UK Orange Galaxy SII NFC Edition (Model GT-I9100p). Had this phone for a little over 2 weeks now and learned a lot from both XDA and sammobile. Okay here are my experiences so far:
The phone that I have comes with Android version 2.3.4 and has Orange applications pre-installed.
What I have been able/unable to do?
Able to root using DooMLoRD v4 exploit - yes!
Able to debrand uninstall Orange Apps using Titanium - yes! ( BUT not the logo at startup though)
Able to use CWM recovery - no! Not unless you are willing to put an insecure Kernel that is and then lose functionality of the NFC. There are some threads that post an NFCEnabler.zip file that you can flash post installation of the insecure Kernel but my experience has been giving me errors when I try to turn NFC on so it's a no go if one wants to keep NFC.
So far the above list is things possible using the orignal ROM that is branded with Orange.
The next thing I have been able to do is install 2.3.6 Samsung stock ROM (list of ROMs found at sammobile.com) - however as this is for the non NFC version you lose that functionality. Also DooMLord exploit does not work with this version so no root (haven't tried any other methods - if anyone else has feel free to update the thread). I have also installed 4.0.3 ICS from sammobile.com but found this a tad buggy (mainly Kernel Panics) - and again no NFC.
A caveat for anyone planning to venture down that route beware, if you want to go back to Orange stock ROM you will get errors stating Cannot mount /efs and /cache directory(ies) etc - took me a while to figure this out but you can get your original Orange rom back if you use Odin3 v1.85 check Re-Partition, Auto-Reboot, F-Reset Time, use a PIT file (I used u1_02_20110310_emmc_EXT4) and the Orange stock ROM (again found at sammobile).
So at the moment I am back with the original Orange ROM as I want to have NFC.
I hope this is useful and would be happy to create a thread of Q&A for owners of the NFC GT-I9100p edition.
Cheers,
J
Thanks for the info, I'm using the same model, I've rooted using doom lords v4, and disabled some of the orange bloatware using nobloat,
however I can't find orange backup to disable it, I network unlocked my phone to use giffgaff instead so don't want this to run after each reboot, the only orange app left on the systems app list is signal boost which when disabled messes up the phone, maybe orange apps, games and back up is built into this our something, because I can't seem to find them on the list..
Did you remove signal boost?
Sent from my GT-I9100P using Tapatalk
The fact is that you can flash any i9100 Custom Rom on the i9100p...The only inconvenient being that you'll lose NFC...which is not a big deal anyway as there is barely nothing you can do with it...at the current time
I no I can flash any rom/kernel I am happy with rooted stock tho because I keep NFC and tv out via mhl. I just want to no how he removed orange backup and orange app store?
Sent from my GT-I9100P using Tapatalk
Saull said:
Thanks for the info, I'm using the same model, I've rooted using doom lords v4, and disabled some of the orange bloatware using nobloat,
however I can't find orange backup to disable it, I network unlocked my phone to use giffgaff instead so don't want this to run after each reboot, the only orange app left on the systems app list is signal boost which when disabled messes up the phone, maybe orange apps, games and back up is built into this our something, because I can't seem to find them on the list..
Did you remove signal boost?
Sent from my GT-I9100P using Tapatalk
Click to expand...
Click to collapse
Hi - no I left signal boost just in case I need it (as I am using both Orange and T-Mobile sim cards at the moment). Since my last post I have actually removed a few more apps using Titanium - I removed the backup and orange using the same method. One thing though, when I removed the Orange Home Selector app I got a boot loop and had to do a reset in recovery 3e (& had to reinstall my apps) but then funny thing after that the home selector app is no longer there - I am guessing Titanium removed it from the actual ROM and upon reset it is no longer there?
The only Orange branded things I have now on the phone are the Orange Internet icon for the web browser, Signal Boost and the annoying splash animation when booting up/down the phone.
jammw said:
Hi - no I left signal boost just in case I need it (as I am using both Orange and T-Mobile sim cards at the moment). Since my last post I have actually removed a few more apps using Titanium - I removed the backup and orange using the same method. One thing though, when I removed the Orange Home Selector app I got a boot loop and had to do a reset in recovery 3e (& had to reinstall my apps) but then funny thing after that the home selector app is no longer there - I am guessing Titanium removed it from the actual ROM and upon reset it is no longer there?
The only Orange branded things I have now on the phone are the Orange Internet icon for the web browser, Signal Boost and the annoying splash animation when booting up/down the phone.
Click to expand...
Click to collapse
If you want you could also change the boot animation to the original SGS2 one or a custom. Details are within the forum.
Sweet - thanks for that
I followed this article here and I used the bootanimation.zip file for the boot up and the shutdown.zip for the boot down & works perfectly - thanks again for the heads up!
UPDATE: Do not remove Home Screen Selector app
A little more info on removing Orange apps:
I did this (removed Orange Home Screen) and just found out that any launcher installed thereafter (Tried ADW and Go) makes the phone reboot into a loop and can't get passed the samsung logo animation....I even tried other home launcher managers from the App Store to the same effect!
PS you can fix the loop by going into recovery (3e) and rest all data etc
jammw said:
Able to use CWM recovery - no! Not unless you are willing to put an insecure Kernel that is and then lose functionality of the NFC. There are some threads that post an NFCEnabler.zip file that you can flash post installation of the insecure Kernel but my experience has been giving me errors when I try to turn NFC on so it's a no go if one wants to keep NFC.
Click to expand...
Click to collapse
jammw said:
The next thing I have been able to do is install 2.3.6 Samsung stock ROM (list of ROMs found at sammobile.com) - however as this is for the non NFC version you lose that functionality. Also DooMLord exploit does not work with this version so no root (haven't tried any other methods - if anyone else has feel free to update the thread). I have also installed 4.0.3 ICS from sammobile.com but found this a tad buggy (mainly Kernel Panics) - and again no NFC.
Click to expand...
Click to collapse
OP:
Let me get this straight... you flashed a standard I9100 firmware (in other words, NOT an I9100P firmware... I9100 firmwares DON'T support NFC), then attempted to flash just a kernel to try to get NFC back?
I'm about 90% certain on this: NFC support is NOT in the kernel. If you remain on your stock i9100P firmware, you can flash whatever kernel you want that supports an I9100 (including insecure rooting kernels, Siyah, SpeedMod - whatever), and you should not lose NFC.
Well I thought so too but after flashing an insecure kernel (the one I tried was GT-I9100_ClockworkMod-Recovery_4.0.0.2.tar which contains a zImage file inside) the NFC option disappeared from under Wireless & Networks. Then I tried the NFCEnabler.zip option to bring it back and did get it back but could not enable it as I was getting an Error Occurred message.
jammw said:
Well I thought so too but after flashing an insecure kernel (the one I tried was GT-I9100_ClockworkMod-Recovery_4.0.0.2.tar which contains a zImage file inside) the NFC option disappeared from under Wireless & Networks. Then I tried the NFCEnabler.zip option to bring it back and did get it back but could not enable it as I was getting an Error Occurred message.
Click to expand...
Click to collapse
Where did you get that tar? Based on the name of the tar, it sounds like it's just cwm recovery... So you never tried a CF-root kernel?
Sent from my GT-I9100 using XDA App
Everything I got is from various threads here on XDA (apart from the offical ROMs which I got from sammobile) - maybe it wasn't a kernel...I did try another zImage which was meant to be the Orange France NFC Kernel (again downloaded from a thread on XDA - filename KERNEL_I9100PBVVKI2) and even with that NFC was not there...I am staring to think I should have gotten a non NFC phone... ;-)
Hi all. I have just received one of these after many years as an iPhone user. So i am a total newbie to Android.
Ok i do not want to mess about with my phone at the moment. I wondered if any of you have any idea for a workaround for the problem i am having with KEIS.
I have installed KEIS and i want to run (store) Samsung Apps. Problem i am getting is
"This device is not supported by Samsung Apps, View compatibility list".
I look in the list and select Galaxy SII GT-I9100. But still no use. So i am at a loss. I guess this may have to do with me having the I9100P NFC from Orange.
I would appreciate any assistance please.
Many thanks
Tony
IMO Kies is total piece of cr*p - don't really use it but I have just connected it and I get 'Samsung Apps cannot be run - Please try again later'. Sorry I can't help further with that.
PS you know you can use the Samsung Apps application installed already on the phone if you want apps from there?
jammw said:
Everything I got is from various threads here on XDA (apart from the offical ROMs which I got from sammobile) - maybe it wasn't a kernel...I did try another zImage which was meant to be the Orange France NFC Kernel (again downloaded from a thread on XDA - filename KERNEL_I9100PBVVKI2) and even with that NFC was not there...I am staring to think I should have gotten a non NFC phone... ;-)
Click to expand...
Click to collapse
But didn't I see somewhere that you already flashed a non i9100p ROM? If so, no kernel is going to bring it back. Nfc.apk is probably gone, and needs to be put back. There's an nfc enabler out there that does that.
Sent from my GT-I9100 using XDA App
jammw said:
IMO Kies is total piece of cr*p - don't really use it but I have just connected it and I get 'Samsung Apps cannot be run - Please try again later'. Sorry I can't help further with that.
PS you know you can use the Samsung Apps application installed already on the phone if you want apps from there?
Click to expand...
Click to collapse
Is the PS a question? If so, yes. I've installed need for speed hot pursuit from the samsung apps app.
Sent from my GT-I9100 using XDA App
ctomgee said:
But didn't I see somewhere that you already flashed a non i9100p ROM? If so, no kernel is going to bring it back. Nfc.apk is probably gone, and needs to be put back. There's an nfc enabler out there that does that.
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
Okay, originally I flashed a non i9100p and yes lost NFC. I then tried the NFC.apk and did get it back but was getting error occurred when trying to enable the tick box under the wireless settings.
Then I found the original Orange i9100p ROM (on sammobile) installed that, got NFC back but I also wanted to have clockworkmod recovery and not the samsung 3e one and that's when I tried what I thought was the insecure kernel (the CWM file in my first reply) but lost NFC totally after applying that. I then tried the Orange France kernel (also a zImage) and that did not bring it back either. That's where I stopped trying anything else.
jammw said:
Okay, originally I flashed a non i9100p and yes lost NFC. I then tried the NFC.apk and did get it back but was getting error occurred when trying to enable the tick box under the wireless settings.
Then I found the original Orange i9100p ROM (on sammobile) installed that, got NFC back but I also wanted to have clockworkmod recovery and not the samsung 3e one and that's when I tried what I thought was the insecure kernel (the CWM file in my first reply) but lost NFC totally after applying that. I then tried the Orange France kernel (also a zImage) and that did not bring it back either. That's where I stopped trying anything else.
Click to expand...
Click to collapse
What version is your "original Orange i9100p ROM"?
I'd say you need to flash back to your original Orange i9100p ROM, then flash the closest CF-Root kernel to that version. This should retain NFC, give you root, and install CWM all at the same time.
Hi Guys,
I only got this phone today (orange UK version).
I've spent hours on the forum trying to find some guides on how to root my phone and flash clean rom. There seems to be just way too much info for me.
Can you please point me into the right direction?
All I want is to root, remove simlock and flash a standard non-orange ROM.
Thanks
Pete
petexx said:
Hi Guys,
I only got this phone today (orange UK version).
I've spent hours on the forum trying to find some guides on how to root my phone and flash clean rom. There seems to be just way too much info for me.
Can you please point me into the right direction?
All I want is to root, remove simlock and flash a standard non-orange ROM.
Thanks
Pete
Click to expand...
Click to collapse
Do you have an I9100, or an I9100P? (P has NFC)
Look in the sticky in the General section. There is a root guide and a firmware guide posted there.
This is a MIUI GB 2.3.xx rom ported from stock ZCPK9(China version) rom with miui patchrom.
---FLASH AT YOUR OWN RISK---
I'm now busy preparing for college entrance exam so I won't (perhaps) continue develop before I get into college
Not working:
GPS(Don't know why)
Not perfect:
Theme
DownloadProviderUI
SideKick
ClockPackage
Default language is Chinese.
App2SD(Cause reboot every time when you switch an App between SD and internal memory but actually it has operated successfully)
Ugly statusbar transparent.
Not proted now(All using stock one):
MIUI Settings
MIUI Camera
MIUI SoundRecorder
MIUI SuperUser
MIUI FileManager
MIUI Browser
MIUI Gallery3D
(And some other MIUI apps)
Features:
All MIUI features except that mentioned above (plus that I forgot and not find).
GUI installer by Aroma.
Optional Ad-hoc patch, Gapps, no keyboard light patch, USA keyboard patch.
Something wonderful:
Press home at lock screen to turn on torch.
Press home + back at same time to take screenshot.
Press menu + volum up to turn background light max(temporary).
Thanks to:
Myself , MIUI team and friends at XDA and Sdapk.
How to install:
1. Make sure you have rj's or Entropy512's installed. This rom does not contain kernel.
2. Download rom and place in your sdcard.
3. Reboot into recovery.
4. Wipe /data as well as anything else if you are first install this rom.IMPORTANT!
5. Choose install zip and this will start Aroma Installer.
6. Choose any patch you like in Aroma Installer and finish install it.
7. You will reboot automatically.
8. Be patient while first boot up.
9. Congratulations!
Screenshots:
Change log:
Code:
MIUI.2.3.xx.Noisyfox.01b
Fixed FC when headset plug in
Add USA keyboard patch
MIUI.2.3.xx.Noisyfox.01a
Fixed Settings Fail After Wipe /data
MIUI.2.3.xx.Noisyfox.01
Initial Release
Download:
https://github.com/Noisyfox/patchrom_GalaxyPlayer5.0/downloads
Develop:
If you are interested in this project, you can get fully source code from here:
https://github.com/Noisyfox/patchrom_GalaxyPlayer5.0
Hey how do we change it back to English in this ROM? And what do you mean by "Theme" is not working perfect? It is working partly or are there any bugs!
Thanks
Rom is perfect for me , but slow .
I have INTL device , which kernel is better for me Rumirand's or your patched kernel?
anil_kilic said:
Rom is perfect for me , but slow .
I have INTL device , which kernel is better for me Rumirand's or your patched kernel?
Click to expand...
Click to collapse
rj's is better.
pmdisawesome said:
Hey how do we change it back to English in this ROM? And what do you mean by "Theme" is not working perfect? It is working partly or are there any bugs!
Thanks
Click to expand...
Click to collapse
It works partly.
This is sweet, good job!!
I followed instructions to the letter. Seemed to flash fine but it is now sitting at the black Samsung screen screen for about 20 minutes. How long has it taken for 1st boot? Tried re-flashing, clearing cache, etc.
change your kernel to rj's kernel and flash again.
rj's kernel says it is for International SGP not US. My SGP is US so I am not sure if this kernel will work.
tsg2513 said:
rj's kernel says it is for International SGP not US. My SGP is US so I am not sure if this kernel will work.
Click to expand...
Click to collapse
Dont install . rj's kernel is for only INTL devices . Sorry i think your device is INTL and replied.
could you make a port for the 4 inch sgp?
I have the same problem as tsg2513, it sits at the Samsung logo and does nothing. I have a USA SGP5.0 and I flashed entropy's kernel right before I flashed the MIUI.
mrjaredbeta said:
I have the same problem as tsg2513, it sits at the Samsung logo and does nothing. I have a USA SGP5.0 and I flashed entropy's kernel right before I flashed the MIUI.
Click to expand...
Click to collapse
figured it out. i have a USA device as well and had the same issue. It was also strange as to why the flashing process only took like 5 seconds....
i flashed rj's kernel (so my buttons stopped working) then i restarted recovery just so the changes get applied. then i proceeded to flash miui. just make sure in the install options you selection USA keyboard patch and the install process should take much longer (that means its working) and bam.
EDIT: ok so the buttons light up but they still don't work. after booting to miui and sat at the homescreen for a minute or two, reboot and flash entropy's kernel.
raishiro said:
figured it out. i have a USA device as well and had the same issue. It was also strange as to why the flashing process only took like 5 seconds....
i flashed rj's kernel (so my buttons stopped working) then i restarted recovery just so the changes get applied. then i proceeded to flash miui. just make sure in the install options you selection USA keyboard patch and the install process should take much longer (that means its working) and bam.
EDIT: ok so the buttons light up but they still don't work. after booting to miui and sat at the homescreen for a minute or two, reboot and flash entropy's kernel.
Click to expand...
Click to collapse
Are you saying that after you re-flashed entropy's kernel the buttons work? Also, have you checked to see if the GPS works?
i flashed entropy's kernel after miui successfully boot up in order to get my buttons to work again, so yes
raishiro said:
i flashed entropy's kernel after miui successfully boot up in order to get my buttons to work again, so yes
Click to expand...
Click to collapse
Great! Can you please check if GPS works?
Google Maps works, just cant get a lock on Navigation. also, just discovered that the launcher restarts whenever you try to turn on usb storage with your cable plugged in...preventing you from accessing your files on your computer
raishiro said:
Google Maps works, just cant get a lock on Navigation. also, just discovered that the launcher restarts whenever you try to turn on usb storage with your cable plugged in...preventing you from accessing your files on your computer
Click to expand...
Click to collapse
Yeah, I just flashed it a little while ago. Everything looks really good expect for a few small problems (as you mention) which I can live with but I really need the GPS to work to consider this my dailer driver. Here's to hoping someone can get it fixed.
tsg2513 said:
Yeah, I just flashed it a little while ago. Everything looks really good expect for a few small problems (as you mention) which I can live with but I really need the GPS to work to consider this my dailer driver. Here's to hoping someone can get it fixed.
Click to expand...
Click to collapse
Anyone know how to get the GPS working?
So after a couple of hours searching the web, it may be that the GPS problem is inherent in MIUI 2.3.
Q&A for [Index Thread] Lenovo K3 Note (K50-t5)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [Index Thread] Lenovo K3 Note (K50-t5). If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Awesome and Thanks
I am grateful someone with experience is stepping up. I am still pretty new to customizing my phones. This K3 Note is the first Mediatek mobile device I have had. I must say the flashing method is way better then qualcomm, despite the support being far more limited. I have only one request, and I would be happy to contribute where and when I can. That request is to unlock basebands 2 and 4. I live in the US and my network connection is the worst I have ever seen. I am limited to a tertiary channel band support from ALL US service providers. It really sucks, I am lucky when the connection exceeds 80kbs, I haven't had a connection this slow since dial-up. Most apps like maps and weather do not even sync on the mobile network I can only use them on wifi. Please help.
---------- Post added at 04:26 PM ---------- Previous post was at 04:22 PM ----------
This K3 Note is the first Mediatek mobile device and I must say the flashing method is way better then qualcomm. Despite the support being far more limited in my region. I have only one request, and I would be happy to contribute where and when I can. That request is to unlock basebands 2 and 4. I live in the US and my network connection is the worst I have ever seen. I am limited to a tertiary channel band support from ALL US service providers. It really sucks, I am lucky when the connection exceeds 80kbs, I haven't had a connection this slow since dial-up. Most apps like maps and weather do not even sync on the mobile network I can only use them on wifi. Please help.
Help
Dear Friends,
I have a problem. I received Lenovo K3 Note MTK 6752.
But my lenovo is not octa core but only quad core.
Somebody can help me?
Why and what I must do for it become octa core?
Thanks a lots
Asiung
lenovo k3 note cuoco92 ROM v.1529
Hi Hackerpower, I have problem with notification of Viber app(other not tested), when is Viber open in background notification works OK but when I clear background app(pressing the 'broom' to free memory), I don't
recive notification at all, notification come when I open app.
In other ROM like Xancin V3 everything work's great! Any solutions for this issue?
I do dirty install(flash) of this ROM over previously installed v.1527.
Lenovo K3 Note Indian Version
Will these custom roms work on Indian version of K3 Note ? I am already rooted
BurntCircuitz said:
I am grateful someone with experience is stepping up. I am still pretty new to customizing my phones. This K3 Note is the first Mediatek mobile device I have had. I must say the flashing method is way better then qualcomm, despite the support being far more limited. I have only one request, and I would be happy to contribute where and when I can. That request is to unlock basebands 2 and 4. I live in the US and my network connection is the worst I have ever seen. I am limited to a tertiary channel band support from ALL US service providers. It really sucks, I am lucky when the connection exceeds 80kbs, I haven't had a connection this slow since dial-up. Most apps like maps and weather do not even sync on the mobile network I can only use them on wifi. Please help.
---------- Post added at 04:26 PM ---------- Previous post was at 04:22 PM ----------
This K3 Note is the first Mediatek mobile device and I must say the flashing method is way better then qualcomm. Despite the support being far more limited in my region. I have only one request, and I would be happy to contribute where and when I can. That request is to unlock basebands 2 and 4. I live in the US and my network connection is the worst I have ever seen. I am limited to a tertiary channel band support from ALL US service providers. It really sucks, I am lucky when the connection exceeds 80kbs, I haven't had a connection this slow since dial-up. Most apps like maps and weather do not even sync on the mobile network I can only use them on wifi. Please help.
Click to expand...
Click to collapse
I don't think anyone has figured out how to unlock mediatek lte bands yet.
I searched and found this: http://forum.xda-developers.com/redmi-note/general/unlock-lte-bands-step-step-xiaomi-mi-t3084774
http://forum.xda-developers.com/general/help/soc-based-universal-tool-to-unlock-lte-t3099086
Good luck.
lsiung said:
Dear Friends,
I have a problem. I received Lenovo K3 Note MTK 6752.
But my lenovo is not octa core but only quad core.
Somebody can help me?
Why and what I must do for it become octa core?
Thanks a lots
Asiung
Click to expand...
Click to collapse
Is this the rom that it came with when you bought it?
Have you tried flashing a stock rom through SP Flash Tool? It sounds like a bug from your rom, if it's 6752 it has to be octa core, 6732 is quad core.
bajsonja said:
Hi Hackerpower, I have problem with notification of Viber app(other not tested), when is Viber open in background notification works OK but when I clear background app(pressing the 'broom' to free memory), I don't
recive notification at all, notification come when I open app.
In other ROM like Xancin V3 everything work's great! Any solutions for this issue?
I do dirty install(flash) of this ROM over previously installed v.1527.
Click to expand...
Click to collapse
That's a problem with cuoco92 custom rom, ask him in his androidiani (link in my index) thread how to fix it.
iamsumitkumar said:
Will these custom roms work on Indian version of K3 Note ? I am already rooted
Click to expand...
Click to collapse
Yes, but you have to have a custom recovery to flash most of them.
Lenovo K3 Note "CWM/TWRP" ROM Install
Forgive me if this is not the place to ask, but ..... I found "Stock ROMs - Downloads and Tutorials" on reddit.com and the CWM/TWRP installation instructions are a bit different :
Extract the downloaded zip file.
Transfer extracted files onto your device/sdcard.
Boot into Custom Recovery mode.
Use the "Restore Backup" function with the extracted files.
Wipe you Data and Dalvik Cache partition.
Reboot.
..... comared to this (for example) :
Download the custom ROM copied to an external SD card root directory
While holding down:
– Power button + volume button up, to enter the recovery mode.
– Wipe Data / Factory Reset -> delete all user data
– Wipe Cache Partition -> Wipe cache
– Advanced -> Wipe Dalvik Cache
Return to recovery main interface Install zip from sdcard --> choose zip from sdcard --> Select your ROM
The "Restore Backup vs Install zip from sdcard" & "Wipe you Data and Dalvik Cache partition vs Wipe Data / Factory Reset, Wipe Cache, Wipe Dalvik Cache"
Is there a difference and why or is it just me? I just want to do it right. Thanks!
Which one is the best ?
I already flashed my Indian ROM using the SP Flash tool and have TWRP custom recovery installed and its working fine.....due to which I was able to change the screen density to 320 from the default by editing the built.prop.....but I am still not able to use xposed framework and viper4android fx...Can you suggest the rom which has these features along with the default ones ? Also the Dolby atmos does not work with any other music player than Google play music...I hope you can throw some light on this
Hello,
I would like to install this rom LiMoNcHeLo NovAMoD MDSTeam VibeAosP, which hackerpower himself is using atm.
But first I have a question about CWM recovery. Yesterday I flashed the CWM from kangel (official thread on k3 note), but I would like to flash the CWM by rootjunky. Can I just flash it via ADB fastboot like I did before or could I get problems flashing CWM over an existing CWM?
Another question that just came up, cause I just read about it in hackerpowers profile - xposed mod/framework - do I have to flash it at the same time I flash the rom or can I use the rom for a few weeks and then decide to flash xposed onto it?
Thank you very much!
And thank you hackerpower for the great work!
Daniel
iamsumitkumar said:
I already flashed my Indian ROM using the SP Flash tool and have TWRP custom recovery installed and its working fine.....due to which I was able to change the screen density to 320 from the default by editing the built.prop.....but I am still not able to use xposed framework and viper4android fx...Can you suggest the rom which has these features along with the default ones ? Also the Dolby atmos does not work with any other music player than Google play music...I hope you can throw some light on this
Click to expand...
Click to collapse
Dolby atmos works universally with any app. If you are speaking about poweramp, disable the Direct Volume control (DVC) under Audio settings of poweramp
G3ca7a said:
Forgive me if this is not the place to ask, but ..... I found "Stock ROMs - Downloads and Tutorials" on reddit.com and the CWM/TWRP installation instructions are a bit different :
Extract the downloaded zip file.
Transfer extracted files onto your device/sdcard.
Boot into Custom Recovery mode.
Use the "Restore Backup" function with the extracted files.
Wipe you Data and Dalvik Cache partition.
Reboot.
..... comared to this (for example) :
Download the custom ROM copied to an external SD card root directory
While holding down:
– Power button + volume button up, to enter the recovery mode.
– Wipe Data / Factory Reset -> delete all user data
– Wipe Cache Partition -> Wipe cache
– Advanced -> Wipe Dalvik Cache
Return to recovery main interface Install zip from sdcard --> choose zip from sdcard --> Select your ROM
The "Restore Backup vs Install zip from sdcard" & "Wipe you Data and Dalvik Cache partition vs Wipe Data / Factory Reset, Wipe Cache, Wipe Dalvik Cache"
Is there a difference and why or is it just me? I just want to do it right. Thanks!
Click to expand...
Click to collapse
Just to try and explain the methods you've listed:
#1 Someone has installed a ROM; and perhaps rooted it and added some scripts, mods etc. and then they have backed up this ROM in custom recovery and they've packed up and uploaded this backup (you will need to use the same recovery - and the files will need to be added to the same folder on the sdcard (TWRP/backup/ for example).
#2 Is a zipped ROM with a META-INF folder that tells the recovery what to do with the included files (system, boot (data) etc.)
#2 is preferred as it isn't dependant on a specific type of recovery...
iamsumitkumar said:
I already flashed my Indian ROM using the SP Flash tool and have TWRP custom recovery installed and its working fine.....due to which I was able to change the screen density to 320 from the default by editing the built.prop.....but I am still not able to use xposed framework and viper4android fx...Can you suggest the rom which has these features along with the default ones ? Also the Dolby atmos does not work with any other music player than Google play music...I hope you can throw some light on this
Click to expand...
Click to collapse
Xposed works on 5.0, links in my sig.
Never liked viper4android.
Dolby works with everything, maybe you uninstalled something you shouldn't have.
Barnlord said:
Hello,
I would like to install this rom LiMoNcHeLo NovAMoD MDSTeam VibeAosP, which hackerpower himself is using atm.
But first I have a question about CWM recovery. Yesterday I flashed the CWM from kangel (official thread on k3 note), but I would like to flash the CWM by rootjunky. Can I just flash it via ADB fastboot like I did before or could I get problems flashing CWM over an existing CWM?
Another question that just came up, cause I just read about it in hackerpowers profile - xposed mod/framework - do I have to flash it at the same time I flash the rom or can I use the rom for a few weeks and then decide to flash xposed onto it?
Thank you very much!
And thank you hackerpower for the great work!
Daniel
Click to expand...
Click to collapse
You can flash any recovery over another one, no problem. There are many recoveries that don't backup/restore properly be careful, and use the one's posted.
You can install/uninstall xposed framework whenever you want, after the first boot will take a long time.
Hi
Iam using this phone from 2 weeks.I flashed the indian Rom but i still have battery draining problem . I lose the full charge after 10 hours of normal use. The battery draining in this phone is very strange and i have never seen like it.
Well i am asking if there is a Rom that manages the battery backup in the best way.And Also the free Ram i am gotting in opening this phone is about 800 mb wich is strange also.
amiros2007 said:
Hi
Iam using this phone from 2 weeks.I flashed the indian Rom but i still have battery draining problem . I lose the full charge after 10 hours of normal use. The battery draining in this phone is very strange and i have never seen like it.
Well i am asking if there is a Rom that manages the battery backup in the best way.And Also the free Ram i am gotting in opening this phone is about 800 mb wich is strange also.
Click to expand...
Click to collapse
Install cpu spy plus and monitor the frequency. I believe your device is not going to deep sleep mode.
Also if no deep sleep install another app better battery stat and check the partial and kernel wakelock when not using the device. Try airplane mode and repeat above process. Finally if it doesn't figured, it is hardware problem, get it replaced
hackerpower said:
You can flash any recovery over another one, no problem. There are many recoveries that don't backup/restore properly be careful, and use the one's posted.
You can install/uninstall xposed framework whenever you want, after the first boot will take a long time.
Click to expand...
Click to collapse
Thanks for the reply hackerpower!
So just to make sure I'm goint to do the right steps in the right order:
After I installed the CWM recovery like rootjunky did in the video you linked in your description, I will do the follwing:
1. Make sure battery is fully charged and boot into recovery
2. backup and restore - backup
3. wipe cache partition
4. advanced - wipe dalvik cache
5. wipe data/factory reset
6. install zip from sdcard (LiMoNcHeLo NovAMoD MDSTeam VibeAosP - gapps already included, so there's no need to flash any gapps.zip)
7. the rom description says root 100%, do I need to flash SuperSU.zip at this point then?
8. restart - enjoy
Lenove K3 note Model K50a40 GPS not working properly
Last month I brought Lenove k3 note in india from Flipkart.
Following is my device information.
Model Number : Lenove K50a40
BaseBand Version :K50a40.LWG.V37,2015/05/21 09:44,2015/05/21 09:44
BuildNumber: K50a40_S117_150706_row
I am facing issue with GPS of this device. GPS is very inaccurate. GPS is quite slow to lock on, and seems to "try too hard" to maintain the lock. GPS position easily "dislocates" to the adjacent or another nearby road. With My old phone I was using Runtastic app and it was capturing distance correctly. Now it shows my location at random places and end up showing totally wrong map of my run session and distance estimates. I am highly disappointed from this phone due to this issue. Is there any fix for this issue?
K30-w
Hi. I have a Lenovo K3 lemon k30-w.
This room is compatible with my phone ?
Thanks
rom [LiMoNcHeLo NovAMoD MDSTeam VibeAosP] drain battery?
Now i flash custom rom : [LiMoNcHeLo NovAMoD MDSTeam VibeAosP] to my k3 note.
i feel this rom drain my battery when i use play game and internet.
who is like me?
Barnlord said:
Thanks for the reply hackerpower!
So just to make sure I'm goint to do the right steps in the right order:
After I installed the CWM recovery like rootjunky did in the video you linked in your description, I will do the follwing:
1. Make sure battery is fully charged and boot into recovery
2. backup and restore - backup
3. wipe cache partition
4. advanced - wipe dalvik cache
5. wipe data/factory reset
6. install zip from sdcard (LiMoNcHeLo NovAMoD MDSTeam VibeAosP - gapps already included, so there's no need to flash any gapps.zip)
7. the rom description says root 100%, do I need to flash SuperSU.zip at this point then?
8. restart - enjoy
Click to expand...
Click to collapse
1. Doesn't need to be fully charged, just don't have little like <20%
2. backup (boot, nvram, system, data)
3.4.5. advanced wipe (select everything except internal storage and sd card)
6.7.8 just flash rom, everything is already there, first boot takes a while.
Rakesh186 said:
Last month I brought Lenove k3 note in india from Flipkart.
Following is my device information.
Model Number : Lenove K50a40
BaseBand Version :K50a40.LWG.V37,2015/05/21 09:44,2015/05/21 09:44
BuildNumber: K50a40_S117_150706_row
I am facing issue with GPS of this device. GPS is very inaccurate. GPS is quite slow to lock on, and seems to "try too hard" to maintain the lock. GPS position easily "dislocates" to the adjacent or another nearby road. With My old phone I was using Runtastic app and it was capturing distance correctly. Now it shows my location at random places and end up showing totally wrong map of my run session and distance estimates. I am highly disappointed from this phone due to this issue. Is there any fix for this issue?
Click to expand...
Click to collapse
Flash the GPS glonass fix posted.
wilsonmorgado said:
Hi. I have a Lenovo K3 lemon k30-w.
This room is compatible with my phone ?
Thanks
Click to expand...
Click to collapse
No, you have K3, not K3 note. This thread is for K50 not K30.
http://gadgets.ndtv.com/lenovo-k3-2191-vs-lenovo-k3-note-2529
bestmobliethailand said:
Now i flash custom rom : [LiMoNcHeLo NovAMoD MDSTeam VibeAosP] to my k3 note.
i feel this rom drain my battery when i use play game and internet.
who is like me?
Click to expand...
Click to collapse
No battery drain here, it must be because of the apps you have running or because of your usage.
the new 1530 dev
i installed the new 1530 dev
i can't use the phone
every time say WLAN stop working
can't return again to cwm recovery
pc can't recognize the device to use adb flash tools
please help
Marshmallow for this device, keeps crashing as it is (com.android.phone, RIL). Getting the problem solved is easy, @puntoazul already written something like that, but I managed to get everything that has to be flashed in a single post.
Flash these files, in the next order, from top to bottom:
- A-GAPPS_6.0.1_09022016.zip - https://mega.nz/#!M99xiQbZ!fcclA9QDSXxxizsifu21MUbgMGsyRsNCCHPO4KrF5xQ (thanks to @puntoazul for packing it)
- APNFixer4CM13.zip - http://forum.xda-developers.com/attachment.php?attachmentid=3689957&d=1458482477 (thanks to @puntoazul for packing it)
- UNIVERSAL NFC DESTROYER - http://forum.xda-developers.com/attachment.php?attachmentid=3280610&d=1429942749 (thanks to @-CALIBAN666- for developing it), yeah, it's made for lollipop but works perfectly.
- Media.zip (codecs pack) http://forum.xda-developers.com/attachment.php?attachmentid=3680746&d=1457817927 (thanks to @EdwinMoq for packing it.)
When you're done, do a factory reset and reboot your device. Then, enjoy Marshmallow .
EDIT: Media.zip seems to be a mistyped step, I haven't found it and it wasn't needed to get a successful startup on my device.
EDIT: It seems like it's needed, anyways, I haven't found it, waiting for @EdwinMoq to answer.
EDIT: Added Media.zip, found at http://forum.xda-developers.com/opt...ogenmod-13-t3303671/post65803228#post65803228 ( @EdwinMoq 's post).
facuarmo said:
Marshmallow for this device, keeps crashing as it is (com.android.phone, RIL). Getting the problem solved is easy, @puntoazul already written something like that, but I managed to get everything that has to be flashed in a single post.
Flash these files, in the next order, from top to bottom:
- A-GAPPS_6.0.1_09022016.zip - https://mega.nz/#!M99xiQbZ!fcclA9QDSXxxizsifu21MUbgMGsyRsNCCHPO4KrF5xQ (thanks to @puntoazul for packing it)
- APNFixer4CM13.zip - http://forum.xda-developers.com/attachment.php?attachmentid=3689957&d=1458482477 (thanks to @puntoazul for packing it)
- UNIVERSAL NFC DESTROYER - http://forum.xda-developers.com/attachment.php?attachmentid=3280610&d=1429942749 (thanks to @-CALIBAN666- for developing it), yeah, it's made for lollipop but works perfectly.
- Media.zip (codecs pack) http://forum.xda-developers.com/attachment.php?attachmentid=3680746&d=1457817927 (thanks to @EdwinMoq for packing it.)
When you're done, do a factory reset and reboot your device. Then, enjoy Marshmallow .
EDIT: Media.zip seems to be a mistyped step, I haven't found it and it wasn't needed to get a successful startup on my device.
EDIT: It seems like it's needed, anyways, I haven't found it, waiting for @EdwinMoq to answer.
EDIT: Added Media.zip, found at http://forum.xda-developers.com/opt...ogenmod-13-t3303671/post65803228#post65803228 ( @EdwinMoq 's post).
Click to expand...
Click to collapse
Ive been experiencing the same problems you have, but i found my own alternate way. Since this phone isnt my daily driver, i used lucky patcher to remove the phone services app aka com.android.phone from the system.Everything is fixed, all stabilized and smooth. I still get crashing from phone and messaging storage,but no lag or stability issues. But ill try this anyway to try to completely remedy the crashing
As only two entries for Orange seem to be missing in the APN database: Does everyone need that fix because the APN list is totally corrupted by this, or only certain Orange customers?
Elite.101 said:
Ive been experiencing the same problems you have, but i found my own alternate way. Since this phone isnt my daily driver, i used lucky patcher to remove the phone services app aka com.android.phone from the system.Everything is fixed, all stabilized and smooth. I still get crashing from phone and messaging storage,but no lag or stability issues. But ill try this anyway to try to completely remedy the crashing
Click to expand...
Click to collapse
Okay, please let me know what happened when you're done.
lecorbusier said:
As only two entries for Orange seem to be missing in the APN database: Does everyone need that fix because the APN list is totally corrupted by this, or only certain Orange customers?
Click to expand...
Click to collapse
For a better stability, you must flash it. For example, running this ROM without this patch, the RIL keeps crashing, taking in mind that Movistar and Tuenti (a lesser know Argentina provider, a recently started provider), are not being detected.
I'll wait for the next build. Then probably use it as a Wireless AP, as there are huge problems resulting from the small data partition and Ram. I still hope that MMs z-buffer feature provides some solution. This whole mess started about half a year ago and getting worse, on the L9 and a similarly featured tablet with CM11, so it's not the rom's fault. The tablet has plenty of space on the data partition, however, but ram and SoC face similar problems.
My current wireless AP is an Iphone 4s with only 0,5GB Ram. And it's is still working reliably, no apps freezing and fcing, and I can access websites which will make Firefox on the L9 and said tablet quit every time.
All the affected apps seem to deal with HTML code and are supposed to use the system webview engine. Updating the Google webview engine is possible with CM12.1 and 13, but to no avail, only taking space on the data partition.
facuarmo said:
Okay, please let me know what happened when you're done.
Click to expand...
Click to collapse
Well. I tried it. No crashing at all with A-Gapps or Gapps mini
But I kept getting kernel panics,even while charging.So I reverted to my system modified nandroid backup in which I uninstalled Phone services aka com.Android. phone and disabled Phone and messaging storage app.
Elite.101 said:
Well. I tried it. No crashing at all with A-Gapps or Gapps mini
But I kept getting kernel panics,even while charging.So I reverted to my system modified nandroid backup in which I uninstalled Phone services aka com.Android. phone and disabled Phone and messaging storage app.
Click to expand...
Click to collapse
Follow this http://forum.xda-developers.com/showpost.php?p=65892603&postcount=395
As i have previously explained in original thread all of these files in a single go. with order defined
1) Goto TWRP recovery can also use new TWRP 3.0.2.0 (i have already installed marshmallow without any errors)
2) Wipe system, Cache and Davic
3) Flash rom
4) Flash Media.zip
5) Flash A-GAPPS_6.0.1_09022016.zip
6) Flash APNFixer4CM13.zip
7) If you have a p768 flash campatch
Also flashed NFC Destroyer so that on booting for the first time... i did'n encountered any error at all.. i have been using this ROM as my daily driver and never encountered any kernel panic or ant other error also i didn't faced any rotation problem. its working fine as it should be. Only thing i am concerned about is battery, it drains very fast, tweaking with kernel auditor didn't help me either. other then this i haven't faced any problem, everything is working fine, i'm able to install Xposed framework without any problem.. Great work......
I have also tried this with New TWRP Recovery.... worked like a charm
Elite.101 said:
Well. I tried it. No crashing at all with A-Gapps or Gapps mini
But I kept getting kernel panics,even while charging.So I reverted to my system modified nandroid backup in which I uninstalled Phone services aka com.Android. phone and disabled Phone and messaging storage app.
Click to expand...
Click to collapse
Can you tell me your real phone model? There're some hard incompatibilities between the P760 and the P769.
Codeplex said:
Follow this http://forum.xda-developers.com/showpost.php?p=65892603&postcount=395
As i have previously explained in original thread all of these files in a single go. with order defined
1) Goto TWRP recovery can also use new TWRP 3.0.2.0 (i have already installed marshmallow without any errors)
2) Wipe system, Cache and Davic
3) Flash rom
4) Flash Media.zip
5) Flash A-GAPPS_6.0.1_09022016.zip
6) Flash APNFixer4CM13.zip
7) If you have a p768 flash campatch
Also flashed NFC Destroyer so that on booting for the first time... i did'n encountered any error at all.. i have been using this ROM as my daily driver and never encountered any kernel panic or ant other error also i didn't faced any rotation problem. its working fine as it should be. Only thing i am concerned about is battery, it drains very fast, tweaking with kernel auditor didn't help me either. other then this i haven't faced any problem, everything is working fine, i'm able to install Xposed framework without any problem.. Great work......
I have also tried this with New TWRP Recovery.... worked like a charm
Click to expand...
Click to collapse
Well, ill try this.The way i tried this was in a different order, but pretty much i have the phone under control since i uninstalled com.android.phone aka Phone Services and disabled Phone and messaging storage.
but i guess ill try this.i need the exact correct order with NFC Destroyer in the list in order of flashing.
---------- Post added at 01:31 PM ---------- Previous post was at 01:30 PM ----------
facuarmo said:
Can you tell me your real phone model? There're some hard incompatibilities between the P760 and the P769.
Click to expand...
Click to collapse
I currently Have the LG-P769. T-Mobile variant
Elite.101 said:
Well. I tried it. No crashing at all with A-Gapps or Gapps mini
But I kept getting kernel panics,even while charging.So I reverted to my system modified nandroid backup in which I uninstalled Phone services aka com.Android. phone and disabled Phone and messaging storage app.
Click to expand...
Click to collapse
Flash in this order (works for me every time)
1) Goto TWRP recovery can also use new TWRP 3.0.2.0 (i have already installed marshmallow without any errors)
2) Wipe system, Cache and Davic
3) Flash rom
4) Flash Media.zip
5) Flash A-GAPPS_6.0.1_09022016.zip
6) Flash APNFixer4CM13.zip
7) NFC Destroyer
and reboot..
Codeplex said:
Flash in this order (works for me every time)
1) Goto TWRP recovery can also use new TWRP 3.0.2.0 (i have already installed marshmallow without any errors)
2) Wipe system, Cache and Davic
3) Flash rom
4) Flash Media.zip
5) Flash A-GAPPS_6.0.1_09022016.zip
6) Flash APNFixer4CM13.zip
7) NFC Destroyer
and reboot..
Click to expand...
Click to collapse
Alright. Ill try this right now.Ima do a backup first.
Codeplex said:
Flash in this order (works for me every time)
1) Goto TWRP recovery can also use new TWRP 3.0.2.0 (i have already installed marshmallow without any errors)
2) Wipe system, Cache and Davic
3) Flash rom
4) Flash Media.zip
5) Flash A-GAPPS_6.0.1_09022016.zip
6) Flash APNFixer4CM13.zip
7) NFC Destroyer
and reboot..
Click to expand...
Click to collapse
im still having problems. i just finished setting up and now i have a kernel panic.......reverting now
Elite.101 said:
Well, ill try this.The way i tried this was in a different order, but pretty much i have the phone under control since i uninstalled com.android.phone aka Phone Services and disabled Phone and messaging storage.
but i guess ill try this.i need the exact correct order with NFC Destroyer in the list in order of flashing.
---------- Post added at 01:31 PM ---------- Previous post was at 01:30 PM ----------
I currently Have the LG-P769. T-Mobile variant
Click to expand...
Click to collapse
The kernel panics that you're experiencing, are also being faced by most of the people who has tried the P760 build in the P769, please check the ROM @EdwinMoq 's post and download the special build for this model, and try again. Then, please tell me how it goes.
facuarmo said:
The kernel panics that you're experiencing, are also being faced by most of the people who has tried the P760 build in the P769, please check the ROM @EdwinMoq 's post and download the special build for this model, and try again. Then, please tell me how it goes.
Click to expand...
Click to collapse
Well specifically, i used the p769 version. i tried apn fixer, nfc destroyer and media.zip, but the problem persisted. so i just reverted back to my nandroid backup in which i uninstalled com.android.phone aka phone services and disabled phone and messaging storage.I have it stable this way without kernel panics and using gapps mini since this isnt my daily driver. My galaxy core prime is SMG360T1.
Elite.101 said:
Well specifically, i used the p769 version. i tried apn fixer, nfc destroyer and media.zip, but the problem persisted. so i just reverted back to my nandroid backup in which i uninstalled com.android.phone aka phone services and disabled phone and messaging storage.I have it stable this way without kernel panics and using gapps mini since this isnt my daily driver. My galaxy core prime is SMG360T1.
Click to expand...
Click to collapse
Hmmm... Idk, sorry. That's what I've learned from here, not much atm haha.
facuarmo said:
Hmmm... Idk, sorry. That's what I've learned from here, not much atm haha.
Click to expand...
Click to collapse
True.one thing I want fixed is the headphones problem where sound goes to speaker
Elite.101 said:
True.one thing I want fixed is the headphones problem where sound goes to speaker
Click to expand...
Click to collapse
That's quite strange, seems like a bad kernel. For me, using the P760 (in the P778g, Argentina, LATAM) works fine, both speakers (front and rear) and headphones.
When the headphone amp starts to clip/overdrive, this is accompanied by an unplugging event for the headphones. Artas' CM11 and CM12.1 are affected, too, but I could get my P760 to work with decent and stable sound output. While in Rammar's PA sound volume was even lower than with the stock rom(too low for even bothering to take the headphones with me) , CM12.1 is loudest. In order to not accidentially trip clipping and unplugging events, which will also reset volume to safety level, requiring to turn it up and clip again etc etc, Ilimited max volume to 80% in the Headset Button Controller app,which allows to control volume via headset mic button.
Galaxy S5 MM 6.0.1 PK1 (Mostly) Stock Deodexed Rom
This build is based on the marshmallow stock G900PVPS3CPK1_G900PSPT3CPK1_SPR build.
This is a first release. Even though it has been tested, please report any issues.
Features:
- Rooted
- Busybox
- Hotspot enabled
- Knox Removed
- ItsOn Removed
- All toggles enabled including hotspot and flashlight
- Usb/battery popups removed
- Signature verification disabled
- .5 animation scales default
- Screen mirroring fix
- Usb debugging on by default
- Carrier label removed from statusbar
- Hidden menu hacked to allow use without prl. Prl write enabled, don't know if it still works on 6.0 though.
- Recovery & Download Mode added to stock reboot menu.
- private mode does not work (not really too interested in fixing it right now, the standard fix doesn't work)
- All apps updated, all stock apps included. Use debloat tool to remove Sprint bloat apps, even if they've taken updates. Only app I left behind is sprint zone because users are always asking for it.
Known Issues:
If you try to edit the toggles, flashlight will disappear.
There is nothing I can do about this right now.
To restore the stock toggles, wipe data on the Add Toggles app and reboot (I use Titanium backup).
Primary Download --> G900P_PK1.6.0.1.De-Odexed.Ver1.0.zip
Mirror Download --> G900P_PK1.6.0.1.De-Odexed.Ver1.0.zip
MD5 Checksum - 863e7150cd53d390a4044dcfd09ba7da
Installation:
**Must be running marshmallow firmware to run this build
I no longer host stock firmware files for this phone. If you need the full stock builds to flash with odin, please visit the sammobile website.
1. Download TWRP Custom Recovery twrp-3.0.2-2-klte.img.tar
Download Odin Odin3_v3.10.7.zip
Other versions are HERE
Place downloaded ROM in phone storage, internal or external SD.
2. Boot phone into download mode, (home+vol dwn+pwr). Open odin, TURN OFF REBOOT OPTION, place twrp in AP slot, plug phone in and flash.
3. Reboot phone directly from download mode to recovery mode, (vol dwn+pwr) then immediate (vol up+pwr+home) when the phone restarts.
Full wipe in twrp - Wipe/Advanced Wipe
select Dalvik/ART cache, System, Data, Cache.
3. Install ROM from twrp main menu after the wipe then reboot.
Reboot will take about 20 minutes.
Additional Downloads:
Full debloat tool -- > Android_M_Full_Debloat.Tool_S5_V1.3.zip
Mini-Bootloaders
Mini Bootloaders are for flashing back and forth between 5.0 and 6.0 without having to flash full tarball.
Flashed with Odin.
android 5.0 OK4 mini bootloader
http://www.mediafire.com/file/ao1zhyssf1tesuf/SM-G900P_OK4_BOOTLOADER.tar.md5
android 6.0 PK1 mini bootloader
http://www.mediafire.com/file/y8cvrzracmkr88e/SM-G900P_PK1_BOOTLOADER.tar.md5
android 5.0 OK4 full factory restore
http://www.mediafire.com/file/w1zwb6savoi6912/G900PVPU3BOK4_G900PSPT3BOK4_SPR.zip
android 6.0 PK1 full factory restore
http://www.mediafire.com/file/cmktw6ayjfwa5ag/G900PVPS3CPK1_G900PSPT3CPK1_SPR.zip
PK1 Deodexed NEW Stuff Addon
Features:
- Fixed quicktoggles, flashlight now remains after edit, smart scrolling removed
- Hotspot and tethering shortcuts added to app tray
- Stock browser secret mode fixed (use 'tabs' in browser to access secret mode)
- Knox info gone from 'about' screen
Changelog:
Code:
[B]Version 1.0 - initial release[/B]
[B]Version 2.0 additions[/B]
- Camera modified so flash works with low battery
- Safe volume threshold nag removed
- Music volume skip mod
- Long press back to kill current app
- Record button added to incall
- Shutter Sound toggle added to Camera settings
- Moderate sound boost modification
- Flashlight option active in display settings for volume buttons
[B]Version 2.1 additions[/B] [COLOR="Red"]REMOVED[/COLOR]
- 3minit battery mod added as separate install
[B]Version 2.2 additions[/B]
- Font pack added, over 1000 fonts
- 3minit Clock added
[B]Version 2.3 additions[/B]
- added more camera hacks for increased bitrate/resolutions and increased the video record timers
- added hack to disable password request when fingerprint lock is active upon reboot
- added mini reboot menu to pulldown statusbar
- added private mode toggle back to quickpanel
- triple tap home for screenshot
- added customsettings app for a couple of toggles
added toggle for music skip, added preference for longpress left - menu, screenshot or phone lock
- added permissive kernel tnx ShinySide for creating one for us
Download link -- > G900P_PK1.6.0.1.NEW_STUFF.Ver1.0.zip
Download link -- > G900P_PK1.6.0.1.NEW_STUFF.Ver2.0.zip
Download link -- > G900P_PK1.6.0.1.NEW_STUFF.3minit_battery.zip 2.0 and earlier ONLY
Download link -- > G900P_PK1.6.0.1.NEW_STUFF.Ver2.2.zip
Download link -- > G900P_PK1.6.0.1.NEW_STUFF.3minit_battery_ADDON_2.2.only.zip
Download link -- > G900P_PK1.6.0.1.NEW_STUFF.Ver2.3b.zip
Download link -- > G900P_PK1.6.0.1.NEW_STUFF.3minit_battery_ADDON_2.3.only.zip
3minit Clock Info
3minit Clock Guide to get you started
Credits @gharrington for 3minit Battery and 3minit Clock
Credits @Winb33 for the Font Pack addon
Credits @ShinySide for permissive kernel
=================================================
Secret mode enabled browers
https://forum.xda-developers.com/showpost.php?p=70437662&postcount=10256
=================================================
Marshmallow Full Factory Build
G900PVPS3CPK1_G900PSPT3CPK1_SPR.zip
Lollipop Full Factory Build
(posted here in case you need it - this is the final build of Lollipop for the S5)
G900PVPU3BOK4_G900PSPT3BOK4_SPR.zip
=================================================
Nice work!! Does the mini bootloader include modem too?
edit: already downloaded and check the file and the answer is yes.
Just to be clear, the mini bootloaders are for jumping back and forth between lollipop roms and marshmallow? Would this be flashed through Odin and then just boot into recovery to flash ROM of choice?
Sent from my SM-G900P using Tapatalk
Caradineme2 said:
Just to be clear, the mini bootloaders are for jumping back and forth between lollipop roms and marshmallow? Would this be flashed through Odin and then just boot into recovery to flash ROM of choice?
Sent from my SM-G900P using Tapatalk
Click to expand...
Click to collapse
Yes. You have to flash those through Odin.
Has anyone else noticed HORRIBLE battery on pk1, vs say ok4 or pca?
Im on the stock pk1, not this version here. Just wondered if its just me, or if its everyone and maybe this is addressed in these roms posted here.
Thanks.
Thanks @tdunham for this rom even though you moved on from this phone. Just moved over from cm13 back to this rom and it's working great so far.
Will viper4android work on this?
whbisondtr said:
Will viper4android work on this?
Click to expand...
Click to collapse
I don't see why not this is just a stock rooted rom with minor mods nothing that much changed. I personally don't really install viper but it should work if you were able to install it on other tw based roms
first, thank you @tdunham for making this. I had an issue using the 3.0.2-1 TWRP as it wouldn't allow SD card access, so I went back to 3.0.1-0 and it worked fine.
EDIT: i can't seem to get v4a to work. Any ideas?
whbisondtr said:
first, thank you @tdunham for making this. I had an issue using the 3.0.2-2 TWRP as it wouldn't allow SD card access, so I went back to 3.0.1-0 and it worked fine.
EDIT: i can't seem to get v4a to work. Any ideas?
Click to expand...
Click to collapse
I found 3.0.2-1 also solved flashing issues. I have noticed access to my ext sd is like its not there. I wondered why. Im gonna try 3.0.1-0.
dwilson48625 said:
Has anyone else noticed HORRIBLE battery on pk1, vs say ok4 or pca?
Im on the stock pk1, not this version here. Just wondered if its just me, or if its everyone and maybe this is addressed in these roms posted here.
Thanks.
Click to expand...
Click to collapse
my battery improved on PK1 coming from MOAR android 5
---------- Post added at 08:29 PM ---------- Previous post was at 08:28 PM ----------
whbisondtr said:
first, thank you @tdunham for making this. I had an issue using the 3.0.2-2 TWRP as it wouldn't allow SD card access, so I went back to 3.0.1-0 and it worked fine.
EDIT: i can't seem to get v4a to work. Any ideas?
Click to expand...
Click to collapse
stay away from 3.0.2-2 TWRP as mentioned in OP
doctorman said:
my battery improved on PK1 coming from MOAR android 5
Click to expand...
Click to collapse
Mine dropped from stock ok4 to pk1. Gonna flash this in the next day or so.
Forgive my ignorance. I've never run a debloat tool. I usually just remove what I don't use but guessing this way is cleaner. Should I boot up the rom and set it up first or run it directly after flashing the rom?
doctorman said:
my battery improved on PK1 coming from MOAR android 5
Click to expand...
Click to collapse
Mine dropped from stock ok4 to pk1. Gonna flash this in the next day or so.
dwilson48625 said:
Mine dropped from stock ok4 to pk1. Gonna flash this in the next day or so.
Click to expand...
Click to collapse
perhaps the bloatware is eating at it. also the battery is a mess after a new flash, needs few days to settle
Debloat , kill all the garabage and let it cycle the battery few times.
Ive tried both stock and debloated, still crappy batt.
Ill flash this n see if its just a quirk on my end or if just so happening that my battery is giving out.
I dont see an option to mount SD as internal storage, is that not available on this build?
Kreatur3 said:
Forgive my ignorance. I've never run a debloat tool. I usually just remove what I don't use but guessing this way is cleaner. Should I boot up the rom and set it up first or run it directly after flashing the rom?
Click to expand...
Click to collapse
Before first boot is best. Doesn't really matter probably.
dwilson48625 said:
Ive tried both stock and debloated, still crappy batt.
Ill flash this n see if its just a quirk on my end or if just so happening that my battery is giving out.
Click to expand...
Click to collapse
Never use an aftermarket battery, they are really not worth it.
If getting an extended yield battery, only purchase the best name brands like zero lemon. I had a cheapy aftermarket standard battery and when I bought a genuine stock, there was a huge difference.
ez2 said:
I dont see an option to mount SD as internal storage, is that not available on this build?
Click to expand...
Click to collapse
Unless something has changed, this has never been an option on stock Touchwiz.
tdunham said:
Before first boot is best. Doesn't really matter probably.
Never use an aftermarket battery, they are really not worth it.
If getting an extended yield battery, only purchase the best name brands like zero lemon. I had a cheapy aftermarket standard battery and when I bought a genuine stock, there was a huge difference.
Unless something has changed, this has never been an option on stock Touchwiz.
Click to expand...
Click to collapse
My apologies is been a while since I've tried a TW rom.
I'm having trouble with accommodating space.
Ive used app2sd to move everything possible but still an issue, any suggestions?
Sent from my SM-G900P using XDA-Developers mobile app