Anyone know of a car dock or holder for another phone that may work with LTEvo?
Sent from my LTEvo using Tapatalk 2
http://forum.xda-developers.com/showthread.php?t=1667679
Also available in Sprint retail stores for less than $40
bighuta said:
http://forum.xda-developers.com/showthread.php?t=1667679
Also available in Sprint retail stores for less than $40
Click to expand...
Click to collapse
I just received that dock yesterday. First impressions are very good. One small exception.
I use the Platinum case that I got at Best Buy, which is essentially the same as the Seidio case.
The phone docks fine, but the case causes the phone to "tilt" a bit to the left. Even with the sleeve out of the dock, it still tilts a bit and does not seat all the way.
But it is barely noticeable and the dock works great.
If you get this dock, be advised that it does not come with a microUSB cable for connecting the dock to your 12v supply in your vehicle. But if your former phone was an EVO 4G like me, you probably have many of those cables laying around any way.
If you do not use a case, however, with the sleeve in the phone fits like a glove.
If you have seen or used the Seidio dock for the OG, like I did, the first thing I can say about this new dock is even though the EVO LTE is larger than the OG, the dock is less intrusive on the windshield.
Thanks, but i mainly just need something to hold my phone. I don't use the NAV on my phone anymore, so i just need something so my phone isn't sitting in my cupholder.
looks sexy but...
I just got my Diztronic case which is absolutely the perfect case and it will not fit in the dock. Not quite sure what to do... I'm leaning towards returning the dock.
EDIT:
after taking the insert out and using the pads in the box it works great!
sandtrapjack said:
I just received that dock yesterday. First impressions are very good. One small exception.
I use the Platinum case that I got at Best Buy, which is essentially the same as the Seidio case.
The phone docks fine, but the case causes the phone to "tilt" a bit to the left. Even with the sleeve out of the dock, it still tilts a bit and does not seat all the way.
But it is barely noticeable and the dock works great.
If you get this dock, be advised that it does not come with a microUSB cable for connecting the dock to your 12v supply in your vehicle. But if your former phone was an EVO 4G like me, you probably have many of those cables laying around any way.
If you do not use a case, however, with the sleeve in the phone fits like a glove.
If you have seen or used the Seidio dock for the OG, like I did, the first thing I can say about this new dock is even though the EVO LTE is larger than the OG, the dock is less intrusive on the windshield.
Click to expand...
Click to collapse
It does tilt a bit, but that's what those two tiny foam pads that came with it are for. I put one on the right bottom side and the other on the middle nearer to the backside of the phone. It's almost perfectly balanced now.
bds369 said:
I just got my Diztronic case which is absolutely the perfect case and it will not fit in the dock. Not quite sure what to do... I'm leaning towards returning the dock.
Click to expand...
Click to collapse
I have the same case and it fits fine in the car dock. Did you remove the extra insert? There's an insert (adapter) that is in there for a naked LTE. It just pops right out and your Diztronic covered LTE will fit right in there. Make sure to use the two foam pieces on the right hand side so your phone doesn't tilt.
http://www.amazon.com/dp/B003SE6LD0
This is what I used with my Photon and it works perfectly with the evo lte. Just turn it sideways and turn on car mode. It holds TIGHT to the windshield and wont come off.. even in Texas heat. For extra fun take a nfc tag and have it auto launch car dock when near
Related
Someone is finally making a car cradle for the Touch Pro 2 that Verizon and Sprint (Not T-Mobile) should be able to use and its cheap. I emailed the U.S. seller and he said it fits though it is really for the GSM Euro versions. No surprise though as it is passive only. Heres a link to their website: http://www.buygpsnow.com/HAiCOM_Car_Mount_HTC_Touch_Pro2.aspx
Anything is better than a squeeze cradle
I have one ordered so will update a review but at $12.95 and $2.50 shipping kinda hard to go wrong even if it only lasts until Proclip gets off their duffs.
I found a coupon code for free shipping. It is hit or miss apparently but worth a try. Code is 430.
Edit: Code did not work
REVIEW IS ON POST #9
nice find. please let us know how it works. i have a vzw tp2 as well and have been searching for a car holder. right now it sets on my passanger seat...
Just a quick question, why do you think squeeze cradles suck?
I've not had one but was considering a universal mount from Arkon, which is a squeeze cradle.
YodaJM said:
Just a quick question, why do you think squeeze cradles suck?
I've not had one but was considering a universal mount from Arkon, which is a squeeze cradle.
Click to expand...
Click to collapse
Its been years since I've seen a phone thick enough that the jaws need to be anywhere near as deep as the vast majority of the squeeze cradles on the market yet they still make them that deep, at least the ones that are big enough to hold a PDA. This would not be much of a problem except they use soft foam in the jaws that is almost invariably also very thick. When you squeeze it tight enough to keep the phone from falling out, it has a tendency to roll the foam right down over the screen making it difficult to use things like the slide tray in Touchflo 3D. It is also difficult to remove the phone as after a short while the teeth of the jaw start wearing down and it sticks closed making the button hard to push. And thats with a good cradle like and Arkon, which is what I have been using. Lesser quality cradles are even worse. There are better squeeze cradles that address these issues but they are all for Iphones. Saw a nice one the other day with nice thin jaws and rubber grips that fit the phone perfectly with a friction lock instead of teeth and a cam but it had and Ipod cable and FM transmitter built in making it very expensive at like $69. Looked real nice too with a nice shiny finish like the phone has but at that price, wasn't going to buy something that I had to cut up to use. To bad the company did not make one with a USB cable instead. Unfortunately most of the good stuff is made by companies that drank large quantities of the Steve Jobs kool-aid years ago.
Techitrucker said:
Its been years since I've seen a phone thick enough that the jaws need to be anywhere near as deep as the vast majority of the squeeze cradles on the market yet they still make them that deep, at least the ones that are big enough to hold a PDA. This would not be much of a problem except they use soft foam in the jaws that is almost invariably also very thick. When you squeeze it tight enough to keep the phone from falling out, it has a tendency to roll the foam right down over the screen making it difficult to use things like the slide tray in Touchflo 3D. It is also difficult to remove the phone as after a short while the teeth of the jaw start wearing down and it sticks closed making the button hard to push. And thats with a good cradle like and Arkon, which is what I have been using. Lesser quality cradles are even worse. There are better squeeze cradles that address these issues but they are all for Iphones. Saw a nice one the other day with nice thin jaws and rubber grips that fit the phone perfectly with a friction lock instead of teeth and a cam but it had and Ipod cable and FM transmitter built in making it very expensive at like $69. Looked real nice too with a nice shiny finish like the phone has but at that price, wasn't going to buy something that I had to cut up to use. To bad the company did not make one with a USB cable instead. Unfortunately most of the good stuff is made by companies that drank large quantities of the Steve Jobs kool-aid years ago.
Click to expand...
Click to collapse
Thanks for the response, very good reasons not to go with a giant squeeze cradle.
I've been looking at this mount http://www.arkon.com/phonemount.php
Curious if anyone else has used it with the TP2.
My phone works splendidly with a $15 squeeze cradle from Walmart. It's not too thick, secure, and does not obscure the screen.
I have an old Treo 650 Pro-clip mount that works perfectly with the TP2. The phone slides in securely and comes out easily. Obviously no active connection but it works great. I put double sided tape in the back of the of the mount and it holds my Fuze perfectly as well.
yo Techitrucker,
you ever get that car cradle. i am really thinkin bout getting one, but would like to hear some first hand experience with it, especially since we both got vzw
MrGoodCat said:
yo Techitrucker,
you ever get that car cradle. i am really thinkin bout getting one, but would like to hear some first hand experience with it, especially since we both got vzw
Click to expand...
Click to collapse
Just came in the mail on Saturday. The cheap shipping took one week to the day. Quality of the cradle is very good. The clip at the top is actually spring loaded, not just plastic that bends back, like the Seidio holsters. It is removable if you won't need to use the cradle in landscape to make it easier to take in and out. The cut out at the bottom is definitely for the CDMA phones. It should work with the European versions also. THIS CRADLE WILL NOT WORK ON THE T-MOBILE VERSION AT ALL. It is a perfect fit for my Verizon phone. This is not a cradle you want if you need to use the keyboard while it is in. For me that is not and issue and it makes me uncomfortable having plastic wedged between my keyboard and screen anyways. Seems like it would be hard on the slider. The windshield mount is very nice. It has push button friction locks instead of screws for the joints and the rotation is spring loaded so its easy to rotate when needed one handed. The suction cup is very large and has a good positive locking mechanism. It is larger than the average suction cup so if you need a dash disk like I do, you will need the largest one you can find. Unfortunately it does not come with one. Since they are selling this so inexpensively, that probably a place they needed to cut their losses. The quality of the cradle is much higher than the price. The cradle does not use a standard mechanism to join it to the mount so you will either have to use the one it came with or go to the website and see if they have another kind of mounting solution. This is really the only limitation I can find. You will not be able to use it with your Proclip solution if you have one. Any more questions you have, just leave them in this forum.
thanks man sounds sweet. yeah i am just lookin for something to just hold my phone in the car, and this sounds great. thanks for takin the time to review. i am only a couple hours from the websites store, hope it doesn't take a week, hah. buyin one right now.
whats this proclip you are talkin about? i am new to the ppc phone genre. are they really that superior? what would you say makes em better than this cradle you just got? just curious, like hearing first hand experiences, thanks
treo...not! said:
My phone works splendidly with a $15 squeeze cradle from Walmart. It's not too thick, secure, and does not obscure the screen.
Click to expand...
Click to collapse
Hi:
What department did you find it in? I have searched by where the cell phone cases are, and can't find a thing.
Thanks!
cincy1020 said:
Hi:
What department did you find it in? I have searched by where the cell phone cases are, and can't find a thing.
Thanks!
Click to expand...
Click to collapse
check automotive section
MrGoodCat said:
thanks man sounds sweet. yeah i am just lookin for something to just hold my phone in the car, and this sounds great. thanks for takin the time to review. i am only a couple hours from the websites store, hope it doesn't take a week, hah. buyin one right now.
whats this proclip you are talkin about? i am new to the ppc phone genre. are they really that superior? what would you say makes em better than this cradle you just got? just curious, like hearing first hand experiences, thanks
Click to expand...
Click to collapse
I had one for my Touch Pro and it was nice enough but it kind of made the gap between the keyboard and phone wider over time. If you absolutely have to have the keyboard open while driving its probably the best on on the market, though to me that keyboard open is just and invitation to disaster. Its hard enough to keep hands off the phone while closed They are not inexpensive by any means. Depending on how you need to configure it you can easily spend well over a $100 bucks. The powered cradle alone without a car specific mount is $60 which is competitive with other powered solutions, but the non powered ones at $40 bucks seem more than a little like highway robbery to me especially since you will still spend $30+ on the mounting solution for the cradle. Still, if you need that keyboard open its the only decent solution at this time. They have no powered option for Verizon yet, but the non powered one they have listed for the AT&T Tilt 2 will work on Verizon and Sprint. The phones are exactly the same shape as the AT&T phone except for the ports on the bottom. If you want a fitted cradle but don't need the keyboard to open while mounted, this is the posted cradle only real solution I've found, but its inexpensive and good quality.
Now if you want the best of both worlds, I was wrong about the Proclip mounts not working with the cradle. They make absolutely the best mounting solution hands down since there is no damage to the vehicle. They have cradle adapters on the site that will make it work and the price is not to bad.
http://www.proclipusa.com/?sectionp...egoryid=&p_year=&p_countryid=0&p_leftorright=
The suction cup on the cradle is 3.25 inches and this adapter is 3.5 inches so it should work.
I'm not a fan of clamp holders or suction cups, had enough of unintentional flying objects. I usually make my own holders that slip into a vent clip from theclip.com
http://theclip.com/store/Ultra-Clip-with-Vent-Mount-p-16176.html
This time I found a perfect custom made touchpro2 holder for $1.35! It clips right into the vent clip with just a little grinding on the vent clip. It holds the phone solidly and perfectly positioned for easy phone use and GPS mapping.
http://www.cellphoneshop.net/pro2holster.html
Nice find
RemE said:
I'm not a fan of clamp holders or suction cups, had enough of unintentional flying objects. I usually make my own holders that slip into a vent clip from theclip.com
http://theclip.com/store/Ultra-Clip-with-Vent-Mount-p-16176.html
This time I found a perfect custom made touchpro2 holder for $1.35! It clips right into the vent clip with just a little grinding on the vent clip. It holds the phone solidly and perfectly positioned for easy phone use and GPS mapping.
http://www.cellphoneshop.net/pro2holster.html
Click to expand...
Click to collapse
Nice find on the holster. Never had a problem myself with a good suction cup holder and nothing bounces like a Freightliner. I find that taping a small vanity mirror to the dash works much better than those little round plastic disks since they where designed to stick to glass. If you have two phones and two holders like I do, the small rectangular one they sell in the automotive department at Walmart will hold both and its only 2 bucks and looks nice. I am not a fan of any kind of vent clip. The two worst enemies of electronics are heat and cold and something as heavy as a PDA is going to break the vent eventually. What I have done in the past is use something like this: http://theclip.com/store/The-Clip-Mount-p-16156.html with a holster or case.
I'm going to get the holster. Been looking for one that faces out like that.
I already have a clip in the car so won't need to take my mount with me when I get off the road.
Techitrucker said:
Never had a problem myself with a good suction cup holder and nothing bounces like a Freightliner. .... If you have two phones and two holders like I do......
Click to expand...
Click to collapse
Driving a semi, using not one cell phone, but two???
You're probably a great driver. But I'm glad there are several states between you and I.
Techitrucker said:
Someone is finally making a car cradle for the Touch Pro 2 that Verizon and Sprint (Not T-Mobile) should be able to use and its cheap. I emailed the U.S. seller and he said it fits though it is really for the GSM Euro versions. No surprise though as it is passive only. Heres a link to their website: http://www.buygpsnow.com/HAiCOM_Car_Mount_HTC_Touch_Pro2.aspx
Anything is better than a squeeze cradle
I have one ordered so will update a review but at $12.95 and $2.50 shipping kinda hard to go wrong even if it only lasts until Proclip gets off their duffs.
I found a coupon code for free shipping. It is hit or miss apparently but worth a try. Code is 430.
Edit: Code did not work
REVIEW IS ON POST #9
Click to expand...
Click to collapse
tons of this stuff on ebay - pick a random one at 10-12 bucks with free shipping and if it doesnt work out too great its no big loss
Anyone know if this will work for the Tilt 2??
http://cgi.ebay.co.uk/ws/eBayISAPI....5&ssPageName=ADME:X:RTQ:GB:1123#ht_4013wt_939
Thats exactly what im looking for but thats the only thing that comes close. I want a sturdy vent mount that can rotate to landscape mode
BRODIT or PROCLIP here in the USA. They have been on the market for about 100 years. at least :-D
They make active, passive, ... versions of their mounts. For almost all available mobile devices. Great quality.
www.brodit.se
www.proclipusa.com
http://www.proclipusa.com/default.a...egory=4&device_brand=16708&device_model=17907
NOT TRUE.
Just spoke with porclip.
The t-mobile version has not been developed and they do not expect it to be manufactured soon.
mpr_ger said:
BRODIT or PROCLIP here in the USA. They have been on the market for about 100 years. at least :-D
They make active, passive, ... versions of their mounts. For almost all available mobile devices. Great quality.
www.brodit.se
www.proclipusa.com
http://www.proclipusa.com/default.a...egory=4&device_brand=16708&device_model=17907
Click to expand...
Click to collapse
http://cgi.ebay.com/ws/eBayISAPI.dl...38080&ssPageName=STRK:MEWNX:IT#ht_3651wt_1260
Found this car mount for the G1. As opposed to the universal ones which are significantly bulkier and honestly dont look that good. This one is sleek and will let you open the G1 to keyboard mode without undocking he phone.
I've ordered it. I'll let you know in a few weeks
Any updated?
This thing looks great and cheap!
Nope. Thats the downfall with getting things from HK off Ebay. Takes forever.
I will post a review maybe take some pictures. I really hope it lets me open the screen and use it full out.
this is what i got :
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=110438371574
ordered it on 29th Nov, still no sign, tracking says : Shipped
Thats the downfall with getting things from HK off Ebay. Takes forever.
Click to expand...
Click to collapse
True!!
Both of those are a custom fit for the G1, but notice the design of them. You can't use the car charger while the phone is in the mount. The 'clip' is covering the charger port.
This one is designed to allow you to charge the G1 while it is in the mount:
http://www.g1depot.com/igrip-custom-fit-flexible-mount/3A78A5815.htm
mrhousto
__________________
Phone: T-mobile Black G1, Rooted
SPL: 1.33.2005
Radio: 2.22.19.26I
Recovery: Amon_RA's 1.5.0, w/switchrom
ROM:
1. Motorola Blur v1.1
2. Cyanogen 4.2.9.1
3. JesterBlur v1.2.5
4. MghtyMax 1.9.1
5. KiNgxKxKlair Eclair Hero Version 0.6
Card: 4GB class 6
mrhousto said:
Both of those are a custom fit for the G1, but notice the design of them. You can't use the car charger while the phone is in the mount. The 'clip' is covering the charger port.
This one is designed to allow you to charge the G1 while it is in the mount:
http://www.g1depot.com/igrip-custom-fit-flexible-mount/3A78A5815.htm
mrhousto
__________________
Phone: T-mobile Black G1, Rooted
SPL: 1.33.2005
Radio: 2.22.19.26I
Recovery: Amon_RA's 1.5.0, w/switchrom
ROM:
1. Motorola Blur v1.1
2. Cyanogen 4.2.9.1
3. JesterBlur v1.2.5
4. MghtyMax 1.9.1
5. KiNgxKxKlair Eclair Hero Version 0.6
Card: 4GB class 6
Click to expand...
Click to collapse
Do you own this? I assume you can open the G1 while its in the holder? And is it sturdy/work well? Held in place alright and whatnot?
tehseano said:
Do you own this? I assume you can open the G1 while its in the holder? And is it sturdy/work well? Held in place alright and whatnot?
Click to expand...
Click to collapse
I don't own one 'yet' because the site says it will be available around 12/30. Looking at the pic, it doesn't seem to interfere with the operation of the phone... meaning you can still slide it open as well as charge it.
I've decided to make a 'temporary' dock for my G1 until the one above is available. I used the back portion of a clear cover that I had laying around. I figured I would put it to some use since I had it!
Here are a few pics:
I got this one to use in my car and love it! Charger fits in and it can be rotated in any direction. Plus you can move it from car to car without messy window rings. http://www.amazon.com/gp/product/B001UGMTKC/ref=oss_T15_product
mrhousto said:
I've decided to make a 'temporary' dock for my G1 until the one above is available. I used the back portion of a clear cover that I had laying around. I figured I would put it to some use since I had it!
Here are a few pics:
Click to expand...
Click to collapse
That was a great idea. I got the cheap one off ebay and the cover does block the charge port. I am going to do a little dremel tooling on it to see if I can make it better. If not I will buy a couple of the cheap cases off ebay and try your mod.
The Ebay one also completely blocks the speaker. I will cut a hole for that too.
billquinn1 said:
That was a great idea. I got the cheap one off ebay and the cover does block the charge port. I am going to do a little dremel tooling on it to see if I can make it better. If not I will buy a couple of the cheap cases off ebay and try your mod.
The Ebay one also completely blocks the speaker. I will cut a hole for that too.
Click to expand...
Click to collapse
You can never go wrong with a dremel tool!! I didn't know that those ebay holders cover up the speaker too. It kinda makes the phone useless while its in there. I got the idea for the one I made off the proclip website. Rather than spending $30 bucks for theirs, I just made my own! I popped the trim off from around the heater/radio and used 3M double sided tape to secure the metal bracket that I bent to shape. Then used another piece of 3M to secure the back portion of the clear cover to the bracket. Of course, I put the 'Dual' sticker on there just for kicks!!!
I got myself a ProClip G1 mount.
http://www.proclipusa.com/brodit-de...h-cable-with-3-in-1-adapter-849868-17354.aspx
It is a little pricey but the build quality is great and has a swivel mount. And yes you can open the screen and access the keyboard while mounted. Only downside (besides the price) is that you have to remove the rubber dust cover from the mini-USB charging port on the G1/Dream. I was kind of ticked off when I found this out after ordering it but I have been without it for quite a while now and haven't had any problems. I usually carry this G1 in my pocket and sometimes on my holster (when my work G1 isn't on me).
tekkitan said:
I got myself a ProClip G1 mount.
http://www.proclipusa.com/brodit-de...h-cable-with-3-in-1-adapter-849868-17354.aspx
It is a little pricey but the build quality is great and has a swivel mount. And yes you can open the screen and access the keyboard while mounted. Only downside (besides the price) is that you have to remove the rubber dust cover from the mini-USB charging port on the G1/Dream. I was kind of ticked off when I found this out after ordering it but I have been without it for quite a while now and haven't had any problems. I usually carry this G1 in my pocket and sometimes on my holster (when my work G1 isn't on me).
Click to expand...
Click to collapse
A little pricey..... I guess!
hi all, i got myself one of these and it comes with a car charger. though i found the cord was not long enough from my cigarette lighter to windscreen.
http://www.amazon.co.uk/Dedicated-W...3?ie=UTF8&s=electronics&qid=1262888830&sr=8-3
mrhousto said:
Both of those are a custom fit for the G1, but notice the design of them. You can't use the car charger while the phone is in the mount. The 'clip' is covering the charger port.
This one is designed to allow you to charge the G1 while it is in the mount:
**Unable to post link due to my restrictions I guess. See mrhousto's original post**
mrhousto
Click to expand...
Click to collapse
So I didn't see anyone comment on this yet. But I went ahead and bought this due to the decent price and what appeared to be the ability to open it while mounted.
So the answer is definitely "yes" to everything I wanted from it.
Yes, it does allow you to open the screen while mounted.
Yes, the clip does hold the phone very well and it is pretty easy to put and remove the phone with one hand.
Yes, you can plug in a charger while mounted and you don't have to remove the little charger door to use it.
Yes, there is a hole in the back so the speaker/camera is exposed so I guess you could record video, or take pictures while driving if that is something you wanted to do. Also, the microphone on the bottom is not blocked in case you want to just use speakerphone while mounted.
Yes, it feels very solid and well made. It says it "Made in Germany" on all of the parts which makes me feel good. "The German's make good stuff!"
Yes, The body clip itself does come off the arm so you could in theory use this for a different phone assuming you can get just the body clip online.
No, you cannot use this with anything other then a regular sized battery/door. (hopefully this was obvious)
Overall, for $20-$25 (depending on shipping), this is an awesome mount for your G1. I haven't actually tried mounting it on my window yet but the big suction cup (~3 inches wide) with the pull lever thing look like they will work great.
Boogy
Ather said:
this is what i got :
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=110438371574
ordered it on 29th Nov, still no sign, tracking says : Shipped
True!!
Click to expand...
Click to collapse
I order this one and finally got it.
It doesn't seem to fit in the way the picture is. The picture shows the "big" tab at the bottom. The problem with this is that it covers the hole for the charger. Also for me it doesn't quite fit so the top tab doesn't clip on to anything and doesn't hold the phone.
If I put it in upside down then the small tab doesn't cover the hole for the charger and it seems to fit nice an snug. But when it is in upside down you can no longer slide it open as the bigger tab is clipped onto the front. That is no big deal for me any ways as I don't plan on opening it while it is in the holder in the car.
the perfect mount/ who needs a navigation system
I also went to g1depo.com and got the windshield mount, it arrived four days early and yes to all the major questions. Opening capability, charger connection, speakerphone/camera hole, and it is also sturdy and well made "German" to be exact. and only 25.00 with shipping. Winner!!!!!!!!!!!!!
zodagreat said:
I also went to g1depo.com and got the windshield mount, it arrived four days early and yes to all the major questions. Opening capability, charger connection, speakerphone/camera hole, and it is also sturdy and well made "German" to be exact. and only 25.00 with shipping. Winner!!!!!!!!!!!!!
Click to expand...
Click to collapse
I hate to burst your bubble but.....
http://www.shop4tech.com/item8622.html
$6 shipped and it fits the G1 perfectly (yes I actually have one). It's a universal design so it's plenty adjustable. Even if it's not as pretty as some it does the job for a fraction of the price.
benmyers2941 said:
I hate to burst your bubble but.....
http://www.shop4tech.com/item8622.html
$6 shipped and it fits the G1 perfectly (yes I actually have one). It's a universal design so it's plenty adjustable. Even if it's not as pretty as some it does the job for a fraction of the price.
Click to expand...
Click to collapse
thats nice and everything, wonderful price...but uuhh...its intended purpose are for navigation devices, although it may have no problem holding, I don't think it would allow all of the g1 usage in dock such as rotating landscape/portrait, opening/closing keyboard, charging with dual 3.5 headset jack/usb extention.
Are there any good carmounts that fit a g1 with the extended battery back cover?
check it out here!
Thanks.
sent from my 3D
Ordered... thanks!!! It says it has its own charging port, too. By the looks of it it should be pretty nice.
Just picked mine up from the Sprint store. It's fantastic. It feels durable, has a removable slot sizing piece so it can accommodate phones with cases, and it comes with a disc for dash mounting if you don't want to window mount it. I love it!
Is this the official one made by HTC? Like the official one for the EVO 4G?
Yeah it is. I saw it today when I picked my phone.
It's really nice. I held off for now though. I've already bought like three cases and want to get a nice sd card...it adds up
SolsticeZero said:
Just picked mine up from the Sprint store. It's fantastic. It feels durable, has a removable slot sizing piece so it can accommodate phones with cases, and it comes with a disc for dash mounting if you don't want to window mount it. I love it!
Click to expand...
Click to collapse
Think an Otterbox Commuter would fit in there once the insert is removed... and still charge the phone?
Bukem75 said:
Think an Otterbox Commuter would fit in there once the insert is removed... and still charge the phone?
Click to expand...
Click to collapse
Yes I will fit and charge the phone too
no Otter box will fit in this car dock, the body glove case is too big it barely goes in at all and it's thinner than the Otterbox defender and commuter by a long shot.
The ones sprint are selling doesn't have the adjustment knob to adjust the mount up and down, it only has the tilt ball adjustment. On Igrips web site theirs shows an adjustment knob at the top of the arm to tilt it up and down and sprints have identical clips on both sides with no knob, making it a bit difficult to get it exactly where you want it
spencer88 said:
Is this the official one made by HTC? Like the official one for the EVO 4G?
Click to expand...
Click to collapse
No it's made by iGrip, not HTC. Just picked it up in the store. I'ts not like the HTC Evo 4G dock at all. This still seems nice though and about $20 cheaper if I remember correctly.
From the bottom of the box
Sunction mount and vehicle disc made in Germany
Vehicle Dock made in china.
Customer Support: iGRIP Global LLC [email protected]
http://www.igrip.us/ Here it is on their page. The mount itself is seperate from the part that holds the phone so in theory for your next phone you could just buy the phone holder and pay less.
Edit: it does put it into car mode though.
The Commuter kinda fits.. if you press down it will charge, but it won't stay that way, you also need to remove the soft USB cover (fine by me)..
It's so close to fitting perfectly I think I'm just gonna dremel it a bit at work on Monday..
So twice now I've brought armband, once off Ebay and once off Cellphoneshop.net and neither of them fit. ebay one won't fit at all, the cellphoneshop.net one barely barely fit with no case on, but the cover don't really close properly and the headphone jack hole is on the wrong side!
Anyone know a good jogging armband with clear face cover that will fit the EVO 3D? preferably with a TPU case on.
Is so frustrating when seller advertise something as for our phone and its actually some generic crap!
I'll throw this out there in case it ends up working out for your. I used to try finding clear cases and arm bands but they never really worked very well and I ended up prefering the phone near my waist and running my headphones inside the back of my shirt.
It works great for my uses. I love it for jogging/working out/shooting around (basketball).
SPIbelt sells jogging belts, bands, etc.
http://www.spibelt.com/spibelt.php
http://store.spibelt.com/Waterresistantspibelt-p/7bl-a001-001-waterres.htm
It does not have a clear face. It's just a slim water resistant pouch/belt that you can order to fit your phone. I just specfied "pouch for HTC EVO" when I ordered mine.
Again it does not have a clear face and I wouldn't even say it's "easily accessible". But for holding your phone securely while being very active (I use it for jogging, lifting and shoot arounds) it is very secure. I strap it around my waist and you forget it's there.
Just thought I would throw it out.
bitslizer said:
So twice now I've brought armband, once off Ebay and once off Cellphoneshop.net and neither of them fit. ebay one won't fit at all, the cellphoneshop.net one barely barely fit with no case on, but the cover don't really close properly and the headphone jack hole is on the wrong side!
Anyone know a good jogging armband with clear face cover that will fit the EVO 3D? preferably with a TPU case on.
Is so frustrating when seller advertise something as for our phone and its actually some generic crap!
Click to expand...
Click to collapse
I went through the same PITA.
Finally found this one which fits beautifully... the little holes for the headphones can be a awkward depending on your plug style/size, but other than that it is the best I've found:
http://www.iarmbands.com/Arm-Band-Armband-for-HTC-EVO-3D-CAB-EVO3d.htm?categoryId=-1
m3Jorge said:
I went through the same PITA.
Finally found this one which fits beautifully... the little holes for the headphones can be a awkward depending on your plug style/size, but other than that it is the best I've found:
http://www.iarmbands.com/Arm-Band-Armband-for-HTC-EVO-3D-CAB-EVO3d.htm?categoryId=-1
Click to expand...
Click to collapse
I'm coming to the conclusion i need to buy the expensive armband also, but I was worry they are just more expensive version of the cheap stuff too.
Can you please let me know if the iarmbands one would work with a TPU case on? if it can then it would be perfect. as far as the headphone holes goes i'm not TOO concern, my headphones have very slim jack, and worse come to worse i can always enlarge the hole a little, as long as its in the right general location
bitslizer said:
I'm coming to the conclusion i need to buy the expensive armband also, but I was worry they are just more expensive version of the cheap stuff too.
Can you please let me know if the iarmbands one would work with a TPU case on? if it can then it would be perfect. as far as the headphone holes goes i'm not TOO concern, my headphones have very slim jack, and worse come to worse i can always enlarge the hole a little, as long as its in the right general location
Click to expand...
Click to collapse
Yes I have the Seidio case on it and it fit just fine I will try and get some pictures up for ya latter on tonight...
m3Jorge said:
I went through the same PITA.
Finally found this one which fits beautifully... the little holes for the headphones can be a awkward depending on your plug style/size, but other than that it is the best I've found:
http://www.iarmbands.com/Arm-Band-Armband-for-HTC-EVO-3D-CAB-EVO3d.htm?categoryId=-1
Click to expand...
Click to collapse
Just ordered one so we'll see how it works out.
From the Sensation boards: http://forum.xda-developers.com/showpost.php?p=16715676&postcount=4
Shady Gambino said:
Arkon's XL-Armband fits the Sensation. I have one with the Incipio NGP case and it fits with the case on.
We designed the armband to fit most phones with screen sizes from 3.7" - 4.3". I've tested it with the Sensation as seen above, Thunderbolt (with TPU case), Droid 3, Droid X 2 and a couple others and they fit.
http://www.arkon.com/sports_armband/#xlarmband
$17.95
*Sorry for the annoying servo noise, I had to use a DSLR to record the video since I was using my live Sensation as a model and the auto focus was on :\
Click to expand...
Click to collapse
Pics with the EVO 3D:
It fits a naked EVO 3D nicely, I'd say it would probably fit with a TPU case.
Got my case from iArmband today and I'mot impressed at all. The holes don't line up at all for the headphone jack, it's more of a generic size then specifically for the 3D and the arm strap is way too short.
Edit... So I received an email from iArmbands about my issues with this item. They apologized for the inconvenience and issued a full refund. They also told me to go ahead and keep the product as well...pretty outstanding customer service if you ask me.
http://www.ebay.com/itm/USB-Battery...818692?pt=PDA_Accessories&hash=item43aa59c504
Looking to pick one up for primarily charging/syncing but most likely will be just charging since USB charges slower than the wall but I'm not sure if this charger charges at 1A or not.
I just ordered one yesterday. I need it to charge the fat extended batteries in the back slot. I am hoping that that if it doesn't come with a 1.0ma charger, I will be able to use one that I already have and get a decent charge time.
ive bought many ebay docks for many phones from many chineese dealers. these days i only buy from nakedcellphone
Only see one pic in the link when viewing on my phone, maybe there's only 1 pic, not sure. Anyway, from what I can tell, it looks just like the one I have. Mine works great for charging my phone and my HTC and Anker batteries. Phone docks nicely naked, and actually also works with some silicone an tpu cases. Seidio Surface w/kickstand case works, and even my Otterbox Commuter which really surprised me!! The charging tip just barely goes in deep enough to initiate charging with the Commuter. That's the only issue when trying to dock with thicker cases: The phone/case fits in the dock, but the charging tip isn't long enough to initiate charging. I assume that if it was much longer though it would cause the phone to not sit flat because the charging tip wouldn't bottom out in the phone (hope I'm making since here where you can understand me, lol, trying to explain it where it makes since).
Anyway, bottom line is the dock works great and well worth the money. I bought a generic dock for my Evo 4G and it never gave me a single issue. To my knowledge its still working great for the guy who bought my Evo 4G an all accessories... I'm gonna buy a generic Ebay dock for whichever phone I purchase next too. I have yet to see the need to spend more money on a dock with a name printed on it. Most of those don't have a spot in the back to charge an extra battery either, which is an absolute must for me! I probably use the battery charger more than the dock itself. Go for it, you won't be disappointed!!
Swyped from my pimpin PG86100 using XDA Premium, boiiiii!!!
stanglifemike said:
Only see one pic in the link when viewing on my phone, maybe there's only 1 pic, not sure. Anyway, from what I can tell, it looks just like the one I have. Mine works great for charging my phone and my HTC and Anker batteries. Phone docks nicely naked, and actually also works with some silicone an tpu cases. Seidio Surface w/kickstand case works, and even my Otterbox Commuter which really surprised me!! The charging tip just barely goes in deep enough to initiate charging with the Commuter. That's the only issue when trying to dock with thicker cases: The phone/case fits in the dock, but the charging tip isn't long enough to initiate charging. I assume that if it was much longer though it would cause the phone to not sit flat because the charging tip wouldn't bottom out in the phone (hope I'm making since here where you can understand me, lol, trying to explain it where it makes since).
Anyway, bottom line is the dock works great and well worth the money. I bought a generic dock for my Evo 4G and it never gave me a single issue. To my knowledge its still working great for the guy who bought my Evo 4G an all accessories... I'm gonna buy a generic Ebay dock for whichever phone I purchase next too. I have yet to see the need to spend more money on a dock with a name printed on it. Most of those don't have a spot in the back to charge an extra battery either, which is an absolute must for me! I probably use the battery charger more than the dock itself. Go for it, you won't be disappointed!!
Swyped from my pimpin PG86100 using XDA Premium, boiiiii!!!
Click to expand...
Click to collapse
the desktop/full site will show more pictures if you scroll down. can you confirm if it's the same item you have and at what mA it charges at?