So, here's the story, i've been on KA13 since it's been released, today i wanted to sell my phone, so i thought i should bring it back to the stock 2.3.4 ROM.
But i can't flash the ftf file anymore...
Here's the log of flashtool:
06/011/2012 10:11:57 - INFO - <- This level is successfully initialized
06/011/2012 10:11:57 - INFO - Flashtool Version 0.7.1.0 built on 2012-05-01 22:07:23
06/011/2012 10:11:57 - INFO - You can drag and drop ftf files here to start flashing them
06/012/2012 10:12:02 - INFO - Device disconnected
06/012/2012 10:12:22 - INFO - Selected R800i_4.0.2.A.0.62_(1253-4437) (1).ftf
06/012/2012 10:12:22 - INFO - Preparing files for flashing
06/012/2012 10:12:23 - INFO - Please connect your device into flashmode.
06/012/2012 10:12:29 - INFO - Device connected in flash mode
06/012/2012 10:12:29 - INFO - Opening device for R/W
06/012/2012 10:12:29 - INFO - Reading device information
06/012/2012 10:12:29 - INFO - Phone ready for flashmode operations.
06/012/2012 10:12:29 - INFO - Start Flashing
06/012/2012 10:12:29 - INFO - Flashing loader
06/012/2012 10:12:32 - INFO - Loader : S1_Loader_Root_773f - Version : R4A066 / Bootloader status : ROOTED / IMEI : 35730204013510
06/012/2012 10:12:32 - INFO - Disabling final data verification check
06/012/2012 10:12:32 - WARN - This file is ignored : simlock.ta
06/012/2012 10:12:32 - INFO - Flashing kernel.sin
Click to expand...
Click to collapse
For some reason, it gets stuck there and won't go any further.
Tried it 20 times so far... same result.
The problem is that the phone won't even boot up anymore, when i press the power button, it simply vibrates but nothing comes up... i can press the power button every 10 seconds and it vibrates, but no boot up.
Also, the phone seems to not be charging battery either, when i plug the power cord, nothing happens...
P.S.: I tried flashing the official ICS BETA ROM, but when i get to the system.img file, it simply hangs there, even after 10 minutes:
c:\Program Files (x86)\Android\android-sdk\platform-tools>fastboot flash system
system.img
sending 'system' (213558 KB)...
FAILED (data transfer failure (Too many links))
finished. total time: 307.393s
Click to expand...
Click to collapse
PLEASE HELP!
The phone sensed you tried to alienate it
Zerobarat1 said:
The phone sensed you tried to alienate it
Click to expand...
Click to collapse
This!
No seriously, I would make sure the .tft file isn't corrupted and redownload it.
Also you could try a other version of flashtool, and check your drivers.
Sent from my Xperia Play using XDA
are you still able to enter recovery or fastboot mode?
have you used flashtool before? try downloading a different ftf
@d_zen: i used 3 different .tfts from different sources, and different ROM versions, like .42, .58 and .62. Also, i've had the previous version of Flashtool, and then i updated to 0.8.0.0 to see if that was the fault.
@elnacho: recovery no, fastboot seems to be working, i've managed to flash kernels with it...
@ttiimm: yes, i've used it before, quite a few times actually. I'm going to download all the .tfts i can find and try them.
Magnumutz said:
@d_zen: i used 3 different .tfts from different sources, and different ROM versions, like .42, .58 and .62. Also, i've had the previous version of Flashtool, and then i updated to 0.8.0.0 to see if that was the fault.
@elnacho: recovery no, fastboot seems to be working, i've managed to flash kernels with it...
@ttiimm: yes, i've used it before, quite a few times actually. I'm going to download all the .tfts i can find and try them.
Click to expand...
Click to collapse
maybe try flashing an older firmware file like 2.3.3 and then update via pc companion
Magnumutz said:
@d_zen: i used 3 different .tfts from different sources, and different ROM versions, like .42, .58 and .62. Also, i've had the previous version of Flashtool, and then i updated to 0.8.0.0 to see if that was the fault.
@elnacho: recovery no, fastboot seems to be working, i've managed to flash kernels with it...
@ttiimm: yes, i've used it before, quite a few times actually. I'm going to download all the .tfts i can find and try them.
Click to expand...
Click to collapse
Happened to me on my windows 7 pc, tried a different pc (running XP) and it worked first time GL.
Sent from my R800i using XDA
Check if you have fastboot, if not, you should relock bootloader first.
Also, try a different cable, usb port, reinstall drivers and and so on...
Sent from my R800i using XDA
Problema e la drivere ,incearca cu un alt calculator sau asteapta la flashtool mai mult cu flashul adica eu am avut de asteptat o ora odata...Inca o chestie, poti din Device Manager sa dezinstalezi driverul(asta poti s-o faci cand telefonul este conectat in fastboot/flashmode) si sa-l reconectezi ca sa-si refaca driverul.
EDIT:Cumva telefonul e blocat intr-o retea? Pentru ca vad ca FlashTool ignora simlock.ta
EN: The problem are the drivers, try on another computer or try and wait a bit more with the flashing, I had to wait an hour once.Another thing, you can uninstall the driver in Device Manager while your phone is connected in fastboot/flashmode and then reconnect the phone to reinstall the drivers.
EDIT:By any chance your phone is simlocked?Because I see that the FlashTool ignores simlock.ta
.ftf*
Sent from my R800i using XDA
Thanks for the suggestions guys, i managed to flash it at last!
I got to another computer and flashed it.
Seems like the drivers were at fault.
Related
Hi,
I have this behavior in my u20i phone that the phone will not boot. When i connect it to my PC, the PC detects the phone momentarily for around 5 seconds and then it disconnects and this will continue until i disconnect it. Does this mean my phone is bricked? Is this what a bootloop is? I read many threads on this forum, and for whoever was facing the problem of bootloop, he was atleast getting SE logo.
Now coming to my problem, i used s1tool to get the present details of my phone and it shows the following:
RUNNING S1_EROM VER "R8A029"
SOFTWARE AID: 0001
LOADER AID: 0001
FLASH ID: "0020/00BC"
LOADER VERSION: "R4A045"
MODEL (from GDFS): U20i
SOFTWARE VERSION: 1235-3411_2.1.1.A.0.6
CUSTOM VERSION: 1238-7170_R4B
.
.
SEMC SIMLOCK CERTIFICATE
The loader version tells me that the bootloader is not unlocked. Tried using SEUS update service to fix my phone back, but after completion, i still am stuck with this boot-looping. Any other suggestions? Any more information required to debug my problem? I had installed a custom rom which was working well (MiniCM7Pro_V21) until i restarted my phone which is when i got this problem. (had got a problem like this before but using SEUS had worked that time)
I can enter the flashmode of the phone atleast but thats it (this gives me some glimmer of hope )
My last resort will be to give my phone to the SE service guys but i wanna know what the problem is before i give it to them.
try again using SEUS????
Yashu1019 said:
try again using SEUS????
Click to expand...
Click to collapse
Already tried both SEUS and also using PCCompanion repair option, none of them are working for me...
Looks like a dying post faiyyaz helping out, but has come to a point where hez stuck, but anyway thanks a lot faiyyaz...Man, i just dont wanna give up and give it so SE guys, want to fix it my way...Anyway, any more suggestions will be helpful...
Attaching the messages exchanged:
faiyyaz said:
R[O]K.O. said:
faiyyaz said:
R[O]K.O. said:
Hi, Its regarding a question i posted on xda developers, http://forum.xda-developers.com/showthread.php?t=1518652
Any help would be very much appreciated...
Click to expand...
Click to collapse
bro.. u aren't getting the Sony Ericsson logo when turn on?? n just to clear your confusion your bootloader is locked o no worries of that.. n 2ndly did u try the latest SEUS..? if not give it a try.. if not working PM again .
Click to expand...
Click to collapse
Used SEUS 2.12.3.5, got a successful message at the end, disconnected the phone and started the phone back again, but problem still exists...Any other ideas i can try out?
Click to expand...
Click to collapse
well that's weird.. i think the only way u can get it working is as you can get into flashmode, you can unlock bootloader then flash the nAa kernel as its got inbuilt CWM recovery,so u can get into recovery mode.. then u can flash a custom ROM.. a perfect ROM would be MiniCm7 by nAa itself n then if u want to get back to stock.. u may flash stock kernel.. then relock bootloader n then use SEUS to get back to Stock ROM.. its a long proceduce but i think it shall work.. if any query fell free to ask.hope that helps you
note: Make sure your following proper instructions while unlocking bootloader , use my tool if u want SE Tweaker Tool n follow correct instruction n read its main thread before u use it..
Click to expand...
Click to collapse
faiyyaz said:
R[O]K.O. said:
Oh and 1 more thing, how can i enable USB debugging when i cannot switch on the phone, by any external means possible?
Click to expand...
Click to collapse
Well sorry mate.. But I thought ur usb debugging might be on.. so I guess the unlock bootloader thing wont work for u.. Maybe u should try givin it to the service center if its under gaurante.. Else il see if there is any other way u can through..
Sent from my U20i using xda premium
Click to expand...
Click to collapse
Hmm. Tricky. Have you tried using Flashtool to put a stock firmware back on?
Sent from my U20i using XDA App
Ticklefish said:
Hmm. Tricky. Have you tried using Flashtool to put a stock firmware back on?
Sent from my U20i using XDA App
Click to expand...
Click to collapse
Just tried it a few mins back, heres what i had on the flashtool disp:
03/030/2012 02:30:56 - INFO - Selected U20i_2.1.1.A.0.6_Baseband_015.ftf
03/030/2012 02:30:56 - INFO - Preparing files for flashing
03/030/2012 02:30:56 - INFO - Please connect your device into flashmode.
03/031/2012 02:31:03 - INFO - Device connected in flash mode
03/031/2012 02:31:03 - INFO - Opening device for R/W
03/031/2012 02:31:03 - INFO - Reading device information
03/031/2012 02:31:03 - INFO - Phone reading for flashing.
03/031/2012 02:31:03 - INFO - Start Flashing
03/031/2012 02:31:03 - INFO - Flashing loader
03/031/2012 02:31:05 - INFO - Loader version : R4A045 / Bootloader status : UNROOTABLE
03/031/2012 02:31:05 - INFO - Flashing amss_fs.sin
03/031/2012 02:31:05 - INFO - Flashing cache.sin
03/031/2012 02:31:06 - INFO - Flashing fota1.sin
03/031/2012 02:31:06 - INFO - Flashing kernel.sin
03/031/2012 02:31:10 - INFO - Flashing amss.sin
03/031/2012 02:31:21 - INFO - Flashing fota0.sin
03/031/2012 02:31:22 - INFO - Flashing finished.
03/031/2012 02:31:22 - INFO - Please wait. Phone will reboot
03/031/2012 02:31:22 - INFO - For flashtool, Unknown Sources and Debugging must be checked in phone settings
03/031/2012 02:31:22 - INFO - Device connected in flash mode
03/031/2012 02:31:23 - INFO - Device disconnected
03/031/2012 02:31:25 - INFO - Device connected in flash mode
03/031/2012 02:31:49 - INFO - Device disconnected
03/031/2012 02:31:55 - INFO - Device connected with USB debugging off
Click to expand...
Click to collapse
Tried starting the phone but am having the same problem still...
Have given the phone today to the SE guys, will let you guys knw if it gets fixed or not (they tried updating, said they used some factory sent updater which didn't work after which they said its a hardware issue, which somehow i doubt)...
Got my phone back today and its in good working condition. They said they replaced the flexicable of my minipro which was faulty. Anyway am happy that its working now and am ready to flash a rom into it again Thanks for all your help and suggestions...
So... Uhhh... Sorry for posting here! I saw the video "you're a noob" and got a little scared of posting here. But its almost 3 days without my phone, so I'm a bit of desperate! >>"
So, I got a X10a, and it was with 2.1 until yesterday. I've taken courage and was going to upgrade to 2.3. Pulgged the phone, downloaded the PC Companion, begin the upgrade. Everything went ok. Then I got in the bootloop. Panic at frist the I started to look for some solution. I flashed to 2.3 x10i generic using Flashtools. Still on bootloop. Flashed to 2.1 using flashing tools, still no good. Tryed to repair with PC Companion, no good. Flashed and flashed and flashed, tryed and tryed to repair and nothing. Still on bootloop, I just can't figure out what I can do! Even formating the SD I tryed, and nothing!
So, anyone can help me? I really need help here, I just can't find anything to help me!
Thank you very much! =)
Sorry for my bad english! =/
Try to flash the ROM 2 times with SEUS if it won't work by the first time. I had such a problem once. If it won't help try to flash this ROM via flashtool, and after that just normally (using SEUS) flash to stock 2.3.3.
Good luck
About SEUS... Can I use PCC repair? Like I can't find a SEUS working, it says "Failed checking application versions, please reinstall the application and make sure you have the latest version".
And THANK YOU SO MUCH for the quick answer!! I'm kinda morning my phone here!
I'm downloading the FM you just posted! =)
dd4nt388 said:
About SEUS... Can I use PCC repair? Like I can't find a SEUS working, it says "Failed checking application versions, please reinstall the application and make sure you have the latest version".
And THANK YOU SO MUCH for the quick answer!! I'm kinda morning my phone here!
I'm downloading the FM you just posted! =)
Click to expand...
Click to collapse
Yes You can use PCC
No dice! =/
Find the SEUS working, flashed twice, nothing.
Flashed the FM you linked, nothing. Flashed once with SEUS on top of it nohting, twice nothing still!
Please! Tell me that my phone its not dead! u.u
dd4nt388 said:
No dice! =/
Find the SEUS working, flashed twice, nothing.
Flashed the FM you linked, nothing. Flashed once with SEUS on top of it nohting, twice nothing still!
Please! Tell me that my phone its not dead! u.u
Click to expand...
Click to collapse
try flashing this 2.1 if it works.
http://www.mediafire.com/?sqv6274anzfzn2x
mirajp1 said:
try flashing this 2.1 if it works.
Click to expand...
Click to collapse
No dice! =/
Tried another cable but still no go...
Don't know what to do anymore... Everything I read say that flashing should resolve... But still don't work
Anyone got a 1.6 Stock so I can try it? Can't find a working link.
did you try rooting your phone with flashtool and install xrecovery?
you can try that might work
The phone does not start... I think for me to root and instal xrecovery I need it to be functional, right?
I have another suggestion. Have u tried flashing another baseband? one that you're sure matchs the rom you flash? If your baseband is wrong installed ROM will be stuck forever.
Sorry, but I don't understand much about baseband. Can't find a easy understanding guide. My phone is from Brazil the company is VIVO. Can you explaim for me? Or show a good guide of it please?
Thank you! =)
EDIT: So, I found a 1.6 and flashed (Old stuff, Cmd). Now here is the diference, after 1.6 I try to turn on my phone and nothing happens, just the green let flash for like 0.5 secs.
When I try to upgrade to 2.1 by flashtool it turn on the screen but just that, no se logo or nothing, and it flicks from time to time.
When flahsing from SEUS I got the same stuff for 2.1.
Got a baseband 52, 54a, 55a and 49i. All I could find in the internet.
Baseband 52, 54a, 55a and 49i no good in SEUS flash.
With generic 2.1 from jakuburban: Tried 54i, 58i and 49i.
No dice... For Crist sake I'm kinda desperate right now!!! >>""""""""""""""""
dd4nt388 said:
Sorry, but I don't understand much about baseband. Can't find a easy understanding guide. My phone is from Brazil the company is VIVO. Can you explaim for me? Or show a good guide of it please?
Thank you! =)
EDIT: So, I found a 1.6 and flashed (Old stuff, Cmd). Now here is the diference, after 1.6 I try to turn on my phone and nothing happens, just the green let flash for like 0.5 secs.
When I try to upgrade to 2.1 by flashtool it turn on the screen but just that, no se logo or nothing, and it flicks from time to time.
When flahsing from SEUS I got the same stuff for 2.1.
Got a baseband 52, 54a, 55a and 49i. All I could find in the internet.
Baseband 52, 54a, 55a and 49i no good in SEUS flash.
With generic 2.1 from jakuburban: Tried 54i, 58i and 49i.
No dice... For Crist sake I'm kinda desperate right now!!! >>""""""""""""""""
Click to expand...
Click to collapse
To flash the baseband's use flashtool (can be downloaded on dev's section). I don't remember what baseband goes with each system version. I can only tell that 2.1.71 only works with Android 2.3.X
PS: finally found the baseband thread, where more detailed info is available: Baseband
kalte said:
To flash the baseband's use flashtool (can be downloaded on dev's section). I don't remember what baseband goes with each system version. I can only tell that 2.1.71 only works with Android 2.3.X
PS: finally found the baseband thread, where more detailed info is available: Baseband
Click to expand...
Click to collapse
No dice! =/
Sorry for the late response, but got no time to spent with the phone.
Flahsed 3.0.1.G.0.75 with 2.1.71. No good! =/
I think I'll just run the repair and send to SE for repair, and be without my phone for 4 months! >>"
dd4nt388 said:
No dice! =/
Sorry for the late response, but got no time to spent with the phone.
Flahsed 3.0.1.G.0.75 with 2.1.71. No good! =/
I think I'll just run the repair and send to SE for repair, and be without my phone for 4 months! >>"
Click to expand...
Click to collapse
Which version of build .75 did u grab? Did u use global generic?
Sent from my X10i using XDA
laneyofdeath said:
Which version of build .75 did u grab? Did u use global generic?
Sent from my X10i using XDA
Click to expand...
Click to collapse
This is the file name. X10i_3.0.1.G.0.75_1241-1846.
When I downloaded said to be global generic. I got a X10a_3.0.1.G.0.75_AMERICA-US GENERIC 1233-8200 here... Should I try with the 2.1.71?
black screen, unable to boot
I tried to install xrecovery, but my device got stuck and now there is black screen..... when I try to flash it, following is what appears on the flashtool
Please help
30/005/2012 08:05:30 - INFO - <- This level is successfully initialized
30/005/2012 08:05:30 - INFO - Flashtool Version 0.6.8.0 built on 2012-02-26 19:26:25
30/005/2012 08:05:30 - INFO - You can drag and drop ftf files here to start flashing them
30/005/2012 08:05:35 - INFO - Device disconnected
30/005/2012 08:05:48 - INFO - Device connected in flash mode
30/006/2012 08:06:08 - INFO - Selected X10_V1_BLRelock.ftf
30/006/2012 08:06:08 - INFO - Preparing files for flashing
30/006/2012 08:06:08 - INFO - Please connect your device into flashmode.
30/006/2012 08:06:08 - INFO - Opening device for R/W
30/006/2012 08:06:08 - INFO - Reading device information
30/006/2012 08:06:08 - INFO - Start Flashing
30/006/2012 08:06:08 - ERROR -
30/006/2012 08:06:08 - ERROR - Error flashing. Aborted
30/006/2012 08:06:09 - INFO - Device connected in flash mode
My device was on gingerbread 2.3.3, stuck from 3 days....
Can anybody tell me what to do in order to recover.... any help will be greatly appreciated
devendra.sobhani said:
I tried to install xrecovery, but my device got stuck and now there is black screen..... when I try to flash it, following is what appears on the flashtool
Please help
30/005/2012 08:05:30 - INFO - <- This level is successfully initialized
30/005/2012 08:05:30 - INFO - Flashtool Version 0.6.8.0 built on 2012-02-26 19:26:25
30/005/2012 08:05:30 - INFO - You can drag and drop ftf files here to start flashing them
30/005/2012 08:05:35 - INFO - Device disconnected
30/005/2012 08:05:48 - INFO - Device connected in flash mode
30/006/2012 08:06:08 - INFO - Selected X10_V1_BLRelock.ftf
30/006/2012 08:06:08 - INFO - Preparing files for flashing
30/006/2012 08:06:08 - INFO - Please connect your device into flashmode.
30/006/2012 08:06:08 - INFO - Opening device for R/W
30/006/2012 08:06:08 - INFO - Reading device information
30/006/2012 08:06:08 - INFO - Start Flashing
30/006/2012 08:06:08 - ERROR -
30/006/2012 08:06:08 - ERROR - Error flashing. Aborted
30/006/2012 08:06:09 - INFO - Device connected in flash mode
My device was on gingerbread 2.3.3, stuck from 3 days....
Can anybody tell me what to do in order to recover.... any help will be greatly appreciated
Click to expand...
Click to collapse
Did you try using different computer????
once i got stuck with same at the time of unlocking bootloader and i resolve it by using different computer
Click to expand...
Click to collapse
try it it might help........
So, I was calling some guys who make box flash in my city. Some said that might be necessary to flash or something by solder(???) I wanna know if it compensate to make box flash, and if really exist this solder procedure.
Thanks! =)
phone restarting again and again
I used sony ericsson update service and it worked.... got gingerbread 2.3.3 again but the phone is restarting again and again.....
I think its the issue with battery...
Please let me know if there's something else i need to do....
thanks in advance
dd4nt388 said:
This is the file name. X10i_3.0.1.G.0.75_1241-1846.
When I downloaded said to be global generic. I got a X10a_3.0.1.G.0.75_AMERICA-US GENERIC 1233-8200 here... Should I try with the 2.1.71?
Click to expand...
Click to collapse
Are u using a X10a or a X10i ?
I think it's X10a for your country (not sure but...)
So the baseband might be 2.1.65 or 2.1.54... 2.1.71 is for X10i according the baseband thread...
HERE is a thread with most of firmware
i have a friend using samsung galaxy s2, and he said he is using some special modified usb that will make the bootloader enter download mode so that he flashed original firmware into his phone after it is bricked...
for x10 mini pro is there such cable? i need it because i think my phone is hardbricked...
it is bootloader unlocked and i flashed the original stock rom into the phone(in attempt to save condition where flashing customised kernel wasnt successful and it keep bootlooping...), and now i cant root it, cant On the phone to enter usb debugging mode, i cant do anything about it, i read so many threads but really didnt help me... , i can say that i tried all of them already...the phone just keep bootlooping the sony erricson logo on and off... using SEUS also didnt help because it shows i have latest version... and now i cant even flash other kernels because flashtool will show some error anyone facing this problem before? before i throw my phone my last hope will be the special usb that i want to find
jasonmiracle said:
i have a friend using samsung galaxy s2, and he said he is using some special modified usb that will make the bootloader enter download mode so that he flashed original firmware into his phone after it is bricked...
for x10 mini pro is there such cable? i need it because i think my phone is hardbricked...
it is bootloader unlocked and i flashed the original stock rom into the phone(in attempt to save condition where flashing customised kernel wasnt successful and it keep bootlooping...), and now i cant root it, cant On the phone to enter usb debugging mode, i cant do anything about it, i read so many threads but really didnt help me... , i can say that i tried all of them already...the phone just keep bootlooping the sony erricson logo on and off... using SEUS also didnt help because it shows i have latest version... and now i cant even flash other kernels because flashtool will show some error anyone facing this problem before? before i throw my phone my last hope will be the special usb that i want to find
Click to expand...
Click to collapse
Samsung phones can only be flashed using special cables, that is true, but SE provided a flashmode that always works, by turning off your phone and pressing the back-button before you plug in your usb-cable... In regards to that they're miles ahead of Samsung. Do you know how to get to Repair mode in SEUS or PC Companion?
SmG67 said:
Samsung phones can only be flashed using special cables, that is true, but SE provided a flashmode that always works, by turning off your phone and pressing the back-button before you plug in your usb-cable... In regards to that they're miles ahead of Samsung. Do you know how to get to Repair mode in SEUS or PC Companion?
Click to expand...
Click to collapse
the repair mode is something like flashing it using flashtool right? wait for the screen asking to connect with flashmode, off phone, press back button then plug in usb, but then SEUS shows i am having newest software? there is guide to make SEUS identify i am not having newest software version, but that is by turning on the phone, and getting file manager to edit something .prop files?
but sadly i really cant do that because i cant even turn on my phone now... what should i do? any other way to change the files inside my phone to make the SEUS detect i am not newest software so that it can download and flash the original rom inside my phone?
jasonmiracle said:
the repair mode is something like flashing it using flashtool right? wait for the screen asking to connect with flashmode, off phone, press back button then plug in usb, but then SEUS shows i am having newest software? there is guide to make SEUS identify i am not having newest software version, but that is by turning on the phone, and getting file manager to edit something .prop files?
but sadly i really cant do that because i cant even turn on my phone now... what should i do? any other way to change the files inside my phone to make the SEUS detect i am not newest software so that it can download and flash the original rom inside my phone?
Click to expand...
Click to collapse
Try to flash THIS with flashtool, it's complete latest (2.1.1.A.0.6) firmware (Kernel and ROM) from SE.
(It comes in at about 213.5MB, although the site may report it's smaller. It will keep downloading until it's done though)
SmG67 said:
Try to flash ubuntuone.com/16ffDIwsKeeof1ILUZrL55 with flashtool, it's complete latest (2.1.1.A.0.6) firmware (Kernel and ROM) from SE.
(It comes in at about 213.5MB, although the site may report it's smaller. It will keep downloading until it's done though)
Click to expand...
Click to collapse
alright let me try this... nice ubuntuone...fast download speed
SmG67 said:
Try to flash [with flashtool, it's complete latest (2.1.1.A.0.6) firmware (Kernel and ROM) from SE.
(It comes in at about 213.5MB, although the site may report it's smaller. It will keep downloading until it's done though)
Click to expand...
Click to collapse
01/000/2012 23:00:05 - INFO - Selected U20_2.1.1.A.0.6_Unbranded_unlockedBL.ftf
01/000/2012 23:00:05 - INFO - Preparing files for flashing
01/001/2012 23:01:07 - INFO - Please connect your device into flashmode.
01/001/2012 23:01:19 - INFO - Device connected in flash mode
01/001/2012 23:01:20 - INFO - Opening device for R/W
01/001/2012 23:01:20 - INFO - Reading device information
01/001/2012 23:01:20 - INFO - Phone ready for flashmode operations.
01/001/2012 23:01:21 - INFO - Start Flashing
01/001/2012 23:01:21 - INFO - Processing loader
01/001/2012 23:01:21 - INFO - Checking header
01/001/2012 23:01:21 - INFO - Ending flash session
01/001/2012 23:01:21 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_DYNAMIC="SIN header verification failed"
Click to expand...
Click to collapse
not working...do i have to flash all the .sin files? this error caused by me choosing all the .sin files... last hope..
jasonmiracle said:
not working...do i have to flash all the .sin files? this error caused by me choosing all the .sin files... last hope..
Click to expand...
Click to collapse
You said your bootloader was unlocked.. That doesn't seem to be the case...
Try This one, for locked bootloader instead.
SmG67 said:
You said your bootloader was unlocked.. That doesn't seem to be the case...
Try This one, for locked bootloader instead.
Click to expand...
Click to collapse
yup, problem i cant flash roms other than stock roms because of locked bootloader...now i can only flash stock kernel, but cant update via SEUS/PCC because it cant detect newest version, probably because of 2.1update 1 version...do you have version 2.1 stock kernel? just wanna try other alternatives... by flashing stock older rom, hopefully SEUS will update it to 2.1update1 version...so far method that you provided now, and method that i think now is the last 2 method...
jasonmiracle said:
yup, problem i cant flash roms other than stock roms because of locked bootloader...now i can only flash stock kernel, but cant update via SEUS/PCC because it cant detect newest version, probably because of 2.1update 1 version...do you have version 2.1 stock kernel? just wanna try other alternatives... by flashing stock older rom, hopefully SEUS will update it to 2.1update1 version...so far method that you provided now, and method that i think now is the last 2 method...
Click to expand...
Click to collapse
Did you try to flash my latest suggestion and just boot up your phone?
SmG67 said:
Did you try to flash my latest suggestion and just boot up your phone?
Click to expand...
Click to collapse
man, your BL unlocked rom works like charm!!! so far flashing fine!!! 62% now... praying that no error pops out...
SmG67 said:
Did you try to flash my latest suggestion and just boot up your phone?
Click to expand...
Click to collapse
bro, THANKS for your BL locked stock firmware!!! it worked!!! my phone booted, now i am choosing languages!! where did you get that .ftf thing? really a lifesaver...
but one more question, now that i can turn on my phone, that i want to flash other roms, i have to root my phone and unlock BL flash with custom kernel, and flash other roms right? this is my first flashing thats why took so long time digging, finally i got solution from you today when i gave up hope and asked question on xda :good:
02/011/2012 00:11:31 - INFO - Selected U20_2.1.1.A.0.6_Unbranded_lockedBL.ftf
02/011/2012 00:11:31 - INFO - Preparing files for flashing
02/011/2012 00:11:34 - INFO - Please connect your device into flashmode.
02/012/2012 00:12:09 - INFO - Flash canceled
02/012/2012 00:12:19 - INFO - Selected U20_2.1.1.A.0.6_Unbranded_lockedBL.ftf
02/012/2012 00:12:19 - INFO - Preparing files for flashing
02/012/2012 00:12:21 - INFO - Please connect your device into flashmode.
02/012/2012 00:12:28 - INFO - Device connected in flash mode
02/012/2012 00:12:29 - INFO - Opening device for R/W
02/012/2012 00:12:29 - INFO - Device connected in flash mode
02/012/2012 00:12:29 - INFO - Reading device information
02/012/2012 00:12:29 - INFO - Phone ready for flashmode operations.
02/012/2012 00:12:29 - INFO - Start Flashing
02/012/2012 00:12:29 - INFO - Processing loader
02/012/2012 00:12:29 - INFO - Checking header
02/012/2012 00:12:29 - INFO - Flashing data
02/012/2012 00:12:31 - INFO - Loader : S1_Loader_Root_8e35 - Version : R4A045 / Bootloader status : UNROOTABLE
02/012/2012 00:12:32 - INFO - Processing kernel.sin
02/012/2012 00:12:32 - INFO - Checking header
02/012/2012 00:12:32 - INFO - Flashing data
02/012/2012 00:12:35 - INFO - Processing fota1.sin
02/012/2012 00:12:35 - INFO - Checking header
02/012/2012 00:12:35 - INFO - Flashing data
02/012/2012 00:12:35 - INFO - Processing fota0.sin
02/012/2012 00:12:35 - INFO - Checking header
02/012/2012 00:12:35 - INFO - Flashing data
02/012/2012 00:12:36 - INFO - Processing amss_fs.sin
02/012/2012 00:12:36 - INFO - Checking header
02/012/2012 00:12:36 - INFO - Flashing data
02/012/2012 00:12:36 - INFO - Processing amss.sin
02/012/2012 00:12:36 - INFO - Checking header
02/012/2012 00:12:36 - INFO - Flashing data
02/012/2012 00:12:55 - INFO - Processing system.sin
02/012/2012 00:12:55 - INFO - Checking header
02/012/2012 00:12:55 - INFO - Flashing data
02/014/2012 00:14:42 - INFO - Processing userdata.sin
02/014/2012 00:14:42 - INFO - Checking header
02/014/2012 00:14:42 - INFO - Flashing data
02/014/2012 00:14:52 - INFO - Processing cache.sin
02/014/2012 00:14:52 - INFO - Checking header
02/014/2012 00:14:52 - INFO - Flashing data
02/014/2012 00:14:52 - INFO - Ending flash session
02/014/2012 00:14:52 - INFO - Flashing finished.
02/014/2012 00:14:52 - INFO - Please unplug and start your phone
02/014/2012 00:14:52 - INFO - For flashtool, Unknown Sources and Debugging must be checked in phone settings
02/014/2012 00:14:53 - INFO - Device connected in flash mode
Click to expand...
Click to collapse
jasonmiracle said:
bro, THANKS for your BL locked stock firmware!!! it worked!!! my phone booted, now i am choosing languages!! where did you get that .ftf thing? really a lifesaver...
but one more question, now that i can turn on my phone, that i want to flash other roms, i have to root my phone and unlock BL flash with custom kernel, and flash other roms right? this is my first flashing thats why took so long time digging, finally i got solution from you today when i gave up hope and asked question on xda :good:
Click to expand...
Click to collapse
Yeh, you got it That is the basic procedure. As long as you follow the instructions in the kernel and rom threads carefully you should be ok.
The .ftf is made from the Sony Ericsson firmware that gets downloaded when you repair using SEUS or PC Companion. Not everyone can use the repair-option, that's why i keep it lying around
SmG67 said:
Yeh, you got it That is the basic procedure. As long as you follow the instructions in the kernel and rom threads carefully you should be ok.
The .ftf is made from the Sony Ericsson firmware that gets downloaded when you repair using SEUS or PC Companion. Not everyone can use the repair-option, that's why i keep it lying around
Click to expand...
Click to collapse
thats really a lifesaver ... these weeks i kept digging about other ways other than SEUS... until i know that my phone is Soft bricked, i think there is other ways to solve it :victory: thanks to you flashing custom roms now glad that i have phones to use again waiting for the nexus
SmG67 said:
Yeh, you got it That is the basic procedure. As long as you follow the instructions in the kernel and rom threads carefully you should be ok.
The .ftf is made from the Sony Ericsson firmware that gets downloaded when you repair using SEUS or PC Companion. Not everyone can use the repair-option, that's why i keep it lying around
Click to expand...
Click to collapse
but i wonder why i flashed nna's jb kernels or ics kernels, my phone got into bootloop unable to start up? bootloop at nna loader... thats the problem last time that kept me trying many things and messed up my phone..
jasonmiracle said:
but i wonder why i flashed nna's jb kernels or ics kernels, my phone got into bootloop unable to start up? bootloop at nna loader... thats the problem last time that kept me trying many things and messed up my phone..
Click to expand...
Click to collapse
Follow the instructions carefully, for JB you need to do wipe data/factory reset (in xRecovery or CWM) before you flash the new kernel, and you have to format /system partition in mount and storage menu of CWM to get the proper partition size. After that you install the nAa's JB ROM and appropriate Google Apps, and if that is successful, wipe data/factory reset, wipe cache and in advanced menu wipe dalvik-cache and wipe batterystats... Then Reboot and wait...
SmG67 said:
Follow the instructions carefully, for JB you need to do wipe data/factory reset (in xRecovery or CWM) before you flash the new kernel, and you have to format /system partition in mount and storage menu of CWM to get the proper partition size. After that you install the nAa's JB ROM and appropriate Google Apps, and if that is successful, wipe data/factory reset, wipe cache and in advanced menu wipe dalvik-cache and wipe batterystats... Then Reboot and wait...
Click to expand...
Click to collapse
as what you said i only did not wipe data/factory reset, wipe cache and in advanced menu wipe dalvik-cache and wipe batterystats then Reboot after successful flashing gapps and rom...
Hello, I've bought a device which is really hard to repair & I'm running out of options!!! The X10 looks brand new but doesn't boot at all!
Until now I've tried Seus/PcCompanion & latest Flashtool.
What happens when I try to power up the device, it vibrates ones but the screen is just black( think because there isn't any firmware/ Rom on it).
When trying to flash a Generic Rom or any Rom at all it gets into flash mode but aboards the procedure.
I also thought that it might be Sim locked & I have to unlock it to get it repaired?! (tried Omnius tool but that didn't work).
When trying to repair with PcCompanion, while trying to install the update/firmware it cancels by telling me there's been a failure, try again or abort.
The same happens with SEUS!
I've tried both tools at least a dozen times without any success!
I never had problems with my other X10.
I'm starting to think it's hardware related & I'll have to take it to a pro.
If anyone has an idea, I t would really appreciate it, thanks!!!!!
JeySee said:
Hello, I've bought a device which is really hard to repair & I'm running out of options!!! The X10 looks brand new but doesn't boot at all!
Until now I've tried Seus/PcCompanion & latest Flashtool.
What happens when I try to power up the device, it vibrates ones but the screen is just black( think because there isn't any firmware/ Rom on it).
When trying to flash a Generic Rom or any Rom at all it gets into flash mode but aboards the procedure.
I also thought that it might be Sim locked & I have to unlock it to get it repaired?! (tried Omnius tool but that didn't work).
When trying to repair with PcCompanion, while trying to install the update/firmware it cancels by telling me there's been a failure, try again or abort.
The same happens with SEUS!
I've tried both tools at least a dozen times without any success!
I never had problems with my other X10.
I'm starting to think it's hardware related & I'll have to take it to a pro.
If anyone has an idea, I t would really appreciate it, thanks!!!!!
Click to expand...
Click to collapse
i dunno if this can help . but when the vibrate wait like 6-10sec then flip to the right like you wanna look to the volumes buttons if you saw any whiteness in the dark of the screen then the phone cable is working . if it still black the cable might be got broken or something or maybe there is wire that got unplugged from its place
btw i think you better take it to pro
#Sorry for bad english :l
Sent from my Xperia X10 using xda app-developers app
EzzyLupe said:
i dunno if this can help . but when the vibrate wait like 6-10sec then flip to the right like you wanna look to the volumes buttons if you saw any whiteness in the dark of the screen then the phone cable is working . if it still black the cable might be got broken or something or maybe there is wire that got unplugged from its place
btw i think you better take it to pro
#Sorry for bad english :l
Sent from my Xperia X10 using xda app-developers app
Click to expand...
Click to collapse
Thanks, I know what you mean with the whiteness but there isn't, it isn't booting at all & I have those two cables which both work, that can't be it. I think I'll let it get checked by a pro. Your English btw is really good, thanks for trying to help
I think either it's a loose cable inside the phone or maybe I have to flash a specific Firmware (maybe an older one, a down grade) but flashing has never worked.
JeySee said:
Thanks, I know what you mean with the whiteness but there isn't, it isn't booting at all & I have those two cables which both work, that can't be it. I think I'll let it get checked by a pro. Your English btw is really good, thanks for trying to help
I think either it's a loose cable inside the phone or maybe I have to flash a specific Firmware (maybe an older one, a down grade) but flashing has never worked.
Click to expand...
Click to collapse
Really !! didn't know lol xD
btw i meant the cable inside the phone that can let the screen work without it the phone will be working and you only see a black screen while actually the phone is working . so try this
1.Power on phone
2.after phone vibrate . plugin the usb at the same time in pc open flashtool
3.Wait like 6-10 sec if something like this appeared '' Device connected with USB debugging off ''
this means the phone actually working. then this might the inside cable problem . if non of this happened dunno what else i can do for you . did you take to a pro yet ??
Sent from my Xperia X10 using xda app-developers app
EzzyLupe said:
Really !! didn't know lol xD
btw i meant the cable inside the phone that can let the screen work without it the phone will be working and you only see a black screen while actually the phone is working . so try this
1.Power on phone
2.after phone vibrate . plugin the usb at the same time in pc open flashtool
3.Wait like 6-10 sec if something like this appeared '' Device connected with USB debugging off ''
this means the phone actually working. then this might the inside cable problem . if non of this happened dunno what else i can do for you . did you take to a pro yet ??
Sent from my Xperia X10 using xda app-developers app
Click to expand...
Click to collapse
I've given it to a pro & hope they'll get it fixed!! If not I'll try to check what Bares asked me to do & provide further details.
Anyway, I'll let you know, thanks
JeySee said:
I've given it to a pro & hope they'll get it fixed!! If not I'll try to check what Bares asked me to do & provide further details.
Anyway, I'll let you know, thanks
Click to expand...
Click to collapse
Ok cool
Well i'm studying electronics 2nd year . so still a noob at hardware things :l
Sent from my Xperia X10 using xda app-developers app
Try stock back everything with SEUS first....
I have same problem on another x10.. there is a solution to fix.. probably you brke bootloader..and if it's so..then you have to give it to pro's... to flash whole firmware with box cable..not usb..
But before that..try this.. firstly...take original charger..and connect it to phone..let the battery charge..you can understand it's charging cuz in 30min's or so it will get heater... then pull off battery and let phone to lie without it for 20 min..then without battery connect phone to charger..and wait..you'll get green led.. wait 20 min after that...then put battery back and flash firmware with flashtool..with no firmware check option... flash whole firmware..kernel...baseband..etc..cuz now yo have empty phone... hope this helps..peace.
FeraVolt said:
I have same problem on another x10.. there is a solution to fix.. probably you brke bootloader..and if it's so..then you have to give it to pro's... to flash whole firmware with box cable..not usb..
But before that..try this.. firstly...take original charger..and connect it to phone..let the battery charge..you can understand it's charging cuz in 30min's or so it will get heater... then pull off battery and let phone to lie without it for 20 min..then without battery connect phone to charger..and wait..you'll get green led.. wait 20 min after that...then put battery back and flash firmware with flashtool..with no firmware check option... flash whole firmware..kernel...baseband..etc..cuz now yo have empty phone... hope this helps..peace.
Click to expand...
Click to collapse
Thank You so much!!!
I´ve given away the phone to a phone repair shop which i think are really good. But since they haven´t called me back I think it´s quite tricky for them too. They´ll charge me 20€ if they can fix it & if not I´ll give Your procedure a Go!!!
Thanks for helping Fera!!!
JeySee said:
Thank You so much!!!
I´ve given away the phone to a phone repair shop which i think are really good. But since they haven´t called me back I think it´s quite tricky for them too. They´ll charge me 20€ if they can fix it & if not I´ll give Your procedure a Go!!!
Thanks for helping Fera!!!
Click to expand...
Click to collapse
Hi Fera!
My phone's still at the repair shop, this guy is convinced he can repair it by flashing the right patch?!? O think he means firmware, so I g gave him another hour to try.
You wrote that i should flash the firmware with no firmware check option?? How shall I do that? Best regards!!!!
Does S1Tool provide any insight into what the state of the phone is??
If it returns it's status, part of the output is the current file system.... or lack there of.
Dr Goodvibes said:
Does S1Tool provide any insight into what the state of the phone is??
If it returns it's status, part of the output is the current file system.... or lack there of.
Click to expand...
Click to collapse
I just ran the S1 Tool & pressed identify & thats what the outcome is:
Running S1 from ver R8A013 (as i know R means Bootloader is locked)
Software AID: 0001
Loader AID: 0001
Flash ID: 002C/00B3
Loader Version: R4A024
Model: X10i
software version: 1227-4612 R2BA026
custom version: 1235-7836 R6A
Filesystem Version: 1227-4607_R2BA026
Ser No.....
Not recognized simlock certificate
maybe you should unlock phone by settool2?
I thought maybe it has something to do with the simlock certificate, so i tried Omnius Tool but the problem is, you need to check ''Unknown Sources'' which i can´t, cause the phone doesn´t boot at all!
EDIT :
I'm not really sure, but perhaps you should take a look here :
http://forum.xda-developers.com/showthread.php?t=1126358
and here :
http://forum.xda-developers.com/showthread.php?t=1324707
FYI
Regards
Bares said:
= CANCEL =
Click to expand...
Click to collapse
What do you mean Bares???
Bares said:
EDIT :
I'm not really sure, but perhaps you should take a look here :
http://forum.xda-developers.com/showthread.php?t=1126358
and here :
http://forum.xda-developers.com/showthread.php?t=1324707
FYI
Regards
Click to expand...
Click to collapse
Another links :
http://forum.xda-developers.com/showthread.php?t=1353623
or
http://forum.xda-developers.com/showthread.php?t=1385730
or
http://xperiadev.wordpress.com/guidelines-xperia/unlock-bootloader/
and...here :
http://androidflip.com/fix-dead-sony-ericsson-phones-fota-update-unlocked-bootloader/
FYI
Regards
Bares said:
Another links :
http://forum.xda-developers.com/showthread.php?t=1353623
or
http://forum.xda-developers.com/showthread.php?t=1385730
or
http://xperiadev.wordpress.com/guidelines-xperia/unlock-bootloader/
and...here :
http://androidflip.com/fix-dead-sony-ericsson-phones-fota-update-unlocked-bootloader/
FYI
Regards
Click to expand...
Click to collapse
Thanks Bares for Your suport!!! I´ve taken a look into all of these links & had hope again But as i read & eg. tried the flash tool provided in the first link (FOTA unbrick), ones again it didn´t work. The problem there was, i needed to have unknown sources checked which i can´t check, cause the devicedoesn´t & has never booted up before.
And for all the other links, I haven´t got an unlocked bootloader, it´s definately locked, so they couldn´t help. Thanks anyway!!! I wrote Sony a mail, but i guess they´re not going to respond.
Perhaps I should try to unlock my bootloader, if it´s possible, i don´t know.
What worked until now was flashing this firmware (X10i_3.0.1.G.0.75_GERMANY with flashtool) but as Fera sugested me to do (exclude Kernel & check no final verification). This only works if the device is without battery for approx 30 min.
I think I also managed to flash Baseband & Kernel this way Ones.
But only when i checked no final verification! Still the device didn´t boot up.....
After a lot of trying & flashing & errors I´m done for today & will continue tomorrow
Good Night
I just gave the Kernel and Baseband another try (unchecked final verification) and that´s what happened:
23/022/2013 21:22:20 - INFO - Selected X10i_3.0.1.G.0.75_Kernel_And_Baseband.ftf
23/022/2013 21:22:20 - INFO - Preparing files for flashing
23/022/2013 21:22:21 - INFO - Please connect your device into flashmode.
23/022/2013 21:22:45 - INFO - Device connected in flash mode
23/022/2013 21:22:46 - INFO - Opening device for R/W
23/022/2013 21:22:46 - INFO - Reading device information
23/022/2013 21:22:46 - INFO - Phone ready for flashmode operations.
23/022/2013 21:22:46 - INFO - Start Flashing
23/022/2013 21:22:46 - INFO - Processing loader
23/022/2013 21:22:46 - INFO - Checking header
23/022/2013 21:22:46 - INFO - Flashing data
23/022/2013 21:22:52 - INFO - Loader : S1_Loader_Root_f851 - Version : R4A024 / Bootloader status : UNROOTABLE
23/022/2013 21:22:52 - INFO - Disabling final data verification check
23/022/2013 21:22:52 - INFO - Processing kernel.sin
23/022/2013 21:22:52 - INFO - Checking header
23/022/2013 21:22:52 - INFO - Flashing data
23/022/2013 21:22:53 - INFO - Processing fota1.sin
23/022/2013 21:22:53 - INFO - Checking header
23/022/2013 21:22:53 - INFO - Flashing data
23/022/2013 21:22:54 - INFO - Processing fota0.sin
23/022/2013 21:22:54 - INFO - Checking header
23/022/2013 21:22:54 - INFO - Flashing data
23/022/2013 21:22:55 - INFO - Processing amss_fs.sin
23/022/2013 21:22:55 - INFO - Checking header
23/022/2013 21:22:55 - INFO - Flashing data
23/022/2013 21:22:55 - INFO - Processing dsp1.sin
23/022/2013 21:22:55 - INFO - Checking header
23/022/2013 21:22:55 - INFO - Flashing data
23/023/2013 21:23:00 - INFO - Processing amss.sin
23/023/2013 21:23:00 - INFO - Checking header
23/023/2013 21:23:00 - INFO - Flashing data
23/023/2013 21:23:08 - INFO - Processing cache.sin
23/023/2013 21:23:08 - INFO - Checking header
23/023/2013 21:23:08 - INFO - Flashing data
23/023/2013 21:23:08 - INFO - Ending flash session
23/023/2013 21:23:08 - INFO - Flashing finished.
23/023/2013 21:23:08 - INFO - Please unplug and start your phone
23/023/2013 21:23:08 - INFO - For flashtool, Unknown Sources and Debugging must be checked in phone settings
23/023/2013 21:23:08 - INFO - Device connected in flash mode
23/023/2013 21:23:23 - INFO - Device disconnected
In my opinion it looks ok but it still doesn´t boot
About above FOTA unbrick, i just wanna show you the similar problem on 2011 devices, it could be due to broken bootloader.
For us (2010 device), this could be happened due to improperly bootloader unlocking (see my post on Fera's discussion thread).
BUT, it still not 'dead' yet (i mean this just software related issue, not an hardware) , since S1Tool can to detected your .
BTW, have you tried to downgrade to 1.6 or 2.1 ?.
Link (thanks to the logic) :
http://forum.xda-developers.com/showpost.php?p=28235376&postcount=2
Android 1.6
or
Android 2.1
Regards
Bares said:
About above FOTA unbrick, i just wanna show you the similar problem on 2011 devices, it could be due to broken bootloader.
For us (2010 device), this could be happened due to improperly bootloader unlocking (see my post on Fera's discussion thread).
BUT, it still not 'dead' yet (i mean this just software related issue, not an hardware) , since S1Tool can to detected your .
BTW, have you tried to downgrade to 1.6 or 2.1 ?.
Link (thanks to the logic) :
http://forum.xda-developers.com/showpost.php?p=28235376&postcount=2
Android 1.6
or
Android 2.1
Regards
Click to expand...
Click to collapse
I'll try to down grade my device after work! I already tried the 2.1 version, I'll give the 1.6 later.
One thing I recognized was, that when I plug in the charger, there's no led on & I think it's not charging!
Talk to you later, peace & thanks!!!
JeySee said:
I'll try to down grade my device after work! I already tried the 2.1 version, I'll give the 1.6 later.
One thing I recognized was, that when I plug in the charger, there's no led on & I think it's not charging!
Talk to you later, peace & thanks!!!
Click to expand...
Click to collapse
Oh i see, hmm.. i dont think that gonna work, since there is bootloader/board related issue, but. ... yeah. ... goodluck.
Regards
Hey everybody!
I need a little help: I wanted to install the Unlimited ROM on my BL locked Xperia Mini Pro... I download the file, put it on my SD card, insert the SD card and boot my phone into recovery.
I format System, Data, and Cache, and go to flash the zip. When I tried, it said there was no SD card inserted!
Because I am a complete idiot, I try to reboot and it obviously won't go into recovery...
I already tried to flash the stock ROM with Flashtools, but it failed.
Does anyone have a solution to my problem?
Thanks in advance,
MustangEmile
Flashtool should work well, tell us which error you get
Or you try the repair options of PC Companion or Sony Update Service
Sent from my Nexus 4 running Android 4.4
mihahn said:
Flashtool should work well, tell us which error you get
Or you try the repair options of PC Companion or Sony Update Service
Sent from my Nexus 4 running Android 4.4
Click to expand...
Click to collapse
Sorry for the late answer, been in school all day...
Here is the log of the flash:
03/007/2014 17:07:40 - INFO - <- This level is successfully initialized
03/007/2014 17:07:40 - INFO - Flashtool Version 0.9.10.1 built on 2013-01-09 19:49:47
03/007/2014 17:07:40 - INFO - You can drag and drop ftf files here to start flashing them
03/007/2014 17:07:45 - INFO - Device disconnected
03/007/2014 17:07:51 - INFO - Selected SK17i_4.1.B.0.587_Official French.ftf
03/007/2014 17:07:51 - INFO - Preparing files for flashing
03/007/2014 17:07:59 - INFO - Please connect your device into flashmode.
03/008/2014 17:08:05 - INFO - Device connected in flash mode
03/008/2014 17:08:05 - INFO - Opening device for R/W
03/008/2014 17:08:05 - INFO - Start Flashing
03/008/2014 17:08:05 - INFO - Processing loader
03/008/2014 17:08:05 - INFO - Checking header
03/008/2014 17:08:05 - INFO - Ending flash session
03/008/2014 17:08:05 - ERROR -
03/008/2014 17:08:05 - ERROR - Error flashing. Aborted
03/008/2014 17:08:06 - INFO - Device connected in flash mode
Click to expand...
Click to collapse
I will try PC Companion, but I doubt it'll work...
Thanks for answering,
MustangEmile
EDIT: PC Companion doesn't recognize the phone...
Whenever I soft-brick my xmp, flashing a new kernel and starting over does the trick, but considering flashtool is not working for you... that's a bit more complicated than I thought.
First off, have you checked your FTF's integrity? exact file size? checksum? have you successfully used it in the past?
Also, can you boot to fastboot mode? if so, unlock your bootloader via sony's dev site and flash a custom kernel, as most of them have CWM built in. It's possible to start over from there.
Maybe it shut down when the flashing is about to start
Sent from my Xperia P
Pixelado said:
Whenever I soft-brick my xmp, flashing a new kernel and starting over does the trick, but considering flashtool is not working for you... that's a bit more complicated than I thought.
First off, have you checked your FTF's integrity? exact file size? checksum? have you successfully used it in the past?
Also, can you boot to fastboot mode? if so, unlock your bootloader via sony's dev site and flash a custom kernel, as most of them have CWM built in. It's possible to start over from there.
Click to expand...
Click to collapse
I've already used this ftf multiple times in the past... I can't unlock my BL: My Xperia Mini Pro was bought through Orange and they disable the possibility to unlock it...
KiyazumiJr said:
Maybe it shut down when the flashing is about to start
Sent from my Xperia P
Click to expand...
Click to collapse
I highly doubt it: it's still on at the end, but thanks for your hypothesis
How sad, hope you can get it back up and running.
MustangEmile said:
I've already used this ftf multiple times in the past... I can't unlock my BL: My Xperia Mini Pro was bought through Orange and they disable the possibility to unlock it...
I highly doubt it: it's still on at the end, but thanks for your hypothesis
Click to expand...
Click to collapse
Try reinstalling the drivers and either connect the phone before selecting the ftf that you want to flash or select ir first and when the popup to connect the phone appears, connect it
Sent from my Nexus 4 running Android 4.4