Related
Hello guys, I'll describe my situation here before getting dirty with the phone:
Phone: Xperia Neo MT15i
Android Version: 4.0.4 (Via PC Companion)
V. Kernel: Stock 2.6.329-perf compilation 4.1.B.0.431
A nice detail here, I had signal
The mobile was bought "free", I had different SIMs from different companies and that worked nice.
I unlocked the bootloader via the official way from the sony web, it went well. (I read in some posts that I lost my DRM, it scares the s**t out of me because I really don't know what is that)
Then I entered fastboot and type fastboot boot boot.img, this boot.img is the NeoRecovery.img, which contains CWM.
Then i insalled de super user.zip for beeing root, AND THAT'S IT.
Now, I have my rooted 4.0.4 with NO SIGNAL.
I insert my PIN code, then I get prompted with the Language selection menu, and then the following message:
Please insert SIM card and restart your phone
All this steps OVER AND OVER AGAIN
(I've tried with 3 different SIMs, and I can't even register in my network)
I've searched a lot, and don't know what to do here. Some help would be nice!
Thanks!!
Not sure about no signal problem, but interesting is that you get setup wizard every time, if I understood you ok.
Go to settings->backup&reset-> and do factory reset, it will wipe your data, so make backup.
Madfysh said:
Not sure about no signal problem, but interesting is that you get setup wizard every time, if I understood you ok.
Go to settings->backup&reset-> and do factory reset, it will wipe your data, so make backup.
Click to expand...
Click to collapse
Hello Madfysh, I wiped my data a few times (also from CWM) and still nothing
The worst part is that now PCC won't fix my device, so I don't know where to head next.
Should I try a custom kernel..? Should I re-lock my bootloader (how?) and trying from PCC?
Thanks!
EDIT: After some loops, I decided to flash my phone with the MT15_4.1.B.0.431_Global.ftf file using flashtool verison 0.9.0.0, I think that contains the ROM only, because the kernel that I'm using is still the same. Nothing new I'm afraid
well, you can relock it, and use PCC. Always good step in solving the problems, first try with stock reflash, then move on
How to relock, you can find in Neo V dev section, sticky thread.
Many thanks for the information, I'm going to try it right now.
Excuse me for asking but do you know if re-locking may cause brick / not entering fastboot again / not beeing able to unlock again?
Thanks!
AxL360 said:
Excuse me for asking but do you know if re-locking may cause brick / not entering fastboot again / not beeing able to unlock again?
Click to expand...
Click to collapse
I didn't hear that happened to someone.
Well finally I got it working, re-locking the bootloader did the trick.
Thanks Madfysh you're awesome. :good:
AxL360 said:
Well finally I got it working, re-locking the bootloader did the trick.
Click to expand...
Click to collapse
Interesting..
Flashing .ftf didn't help, but re-locking did, right?
isnt relocking done by flashing ftf alone?
viseshprasad said:
isnt relocking done by flashing ftf alone?
Click to expand...
Click to collapse
If that was toward me, by .ftf i meant on entire .ftf which he mentioned in his post, not on the relock .ftf.
Hello guys, i had finally made up my mind to root my xperia neo V, i learnt that i have to "Downgrade to 0.42" version and then root my phone, so i downloaded .42 firmware and latest version of Flashtool i.e 0.9.1.0 , i did all steps correclty, checked all checkboxes correctly, at 13% that flashing is simply stuck, no messages nothing,
so i tried with another version of Flashtool, i,e 0.6.8.0, but that also went in Vain, same stuck at 13%, this is the log,
it gets stuck at system.sin,
i tried checking, 'Exclude System' and then flashed, then it gets flashed upto 100%, but while booting phone is stuck @ 'Sony Logo',
another thing i want to tell is, "Already when i bought this phone it had .62 version installed in it, no .42" , it this the reason for not successful flashing?
my phone is completely dead guys, please help me ASAP, pleading you all, please. i have also posted in talksonymobile.com, please somebody help me, please guys
thunderstorm20 said:
Hello guys, i had finally made up my mind to root my xperia neo V, i learnt that i have to "Downgrade to 0.42" version and then root my phone, so i downloaded .42 firmware and latest version of Flashtool i.e 0.9.1.0 , i did all steps correclty, checked all checkboxes correctly, at 13% that flashing is simply stuck, no messages nothing,
so i tried with another version of Flashtool, i,e 0.6.8.0, but that also went in Vain, same stuck at 13%, this is the log,
it gets stuck at system.sin,
i tried checking, 'Exclude System' and then flashed, then it gets flashed upto 100%, but while booting phone is stuck @ 'Sony Logo',
another thing i want to tell is, "Already when i bought this phone it had .62 version installed in it, no .42" , it this the reason for not successful flashing?
my phone is completely dead guys, please help me ASAP, pleading you all, please. i have also posted in talksonymobile.com, please somebody help me, please guys
Click to expand...
Click to collapse
did you tried other ' USB ' port ?
is the USB-Cable original or NoName ! ?
any AntiVirus active ? < -- switch off !
you don't have to flash ' 42 ', you can flash any current ROM !
what about the BooLoader ?
good luck !
greetings
thunderstorm20 said:
Hello guys, i had finally made up my mind to root my xperia neo V, i learnt that i have to "Downgrade to 0.42" version and then root my phone, so i downloaded .42 firmware and latest version of Flashtool i.e 0.9.1.0 , i did all steps correclty, checked all checkboxes correctly, at 13% that flashing is simply stuck, no messages nothing,
so i tried with another version of Flashtool, i,e 0.6.8.0, but that also went in Vain, same stuck at 13%, this is the log,
it gets stuck at system.sin,
i tried checking, 'Exclude System' and then flashed, then it gets flashed upto 100%, but while booting phone is stuck @ 'Sony Logo',
another thing i want to tell is, "Already when i bought this phone it had .62 version installed in it, no .42" , it this the reason for not successful flashing?
my phone is completely dead guys, please help me ASAP, pleading you all, please. i have also posted in talksonymobile.com, please somebody help me, please guys
Click to expand...
Click to collapse
First of all just make sure that you have installed the drivers for your device.. If not then go to C:Flashtool/drivers
Then, as you said you checked all checkboxes.. You don't need to do that!
Just check on the following, wipe data, wipe cache, wipe apps log..
Trust me I have flashed firmware like 100 times using this method and it has worked correctly!
Do as I said!
All the best!
CooSeeS said:
did you tried other ' USB ' port ?
is the USB-Cable original or NoName ! ?
any AntiVirus active ? < -- switch off !
you don't have to flash ' 42 ', you can flash any current ROM !
what about the BooLoader ?
good luck !
greetings
Click to expand...
Click to collapse
cable is original bro, it is charger cum usb cable given by Sony, and i tried other usb ports also, but it actually flashes other small small files, but fails when it comes to system.sin, and im trying to flash .42 because i can root my phone only through that, if thr are other methods pls mention dude.
iamdchosen1 said:
First of all just make sure that you have installed the drivers for your device.. If not then go to C:Flashtool/drivers
Then, as you said you checked all checkboxes.. You don't need to do that!
Just check on the following, wipe data, wipe cache, wipe apps log..
Trust me I have flashed firmware like 100 times using this method and it has worked correctly!
Do as I said!
All the best!
Click to expand...
Click to collapse
i manually installed all the drivers dude, i tried all combinations of the Check boxes, none worked, im worried
thunderstorm20 said:
Hello guys, i had finally made up my mind to root my xperia neo V, i learnt that i have to "Downgrade to 0.42" version and then root my phone, so i downloaded .42 firmware and latest version of Flashtool i.e 0.9.1.0 , i did all steps correclty, checked all checkboxes correctly, at 13% that flashing is simply stuck, no messages nothing,
so i tried with another version of Flashtool, i,e 0.6.8.0, but that also went in Vain, same stuck at 13%, this is the log,
it gets stuck at system.sin,
i tried checking, 'Exclude System' and then flashed, then it gets flashed upto 100%, but while booting phone is stuck @ 'Sony Logo',
another thing i want to tell is, "Already when i bought this phone it had .62 version installed in it, no .42" , it this the reason for not successful flashing?
my phone is completely dead guys, please help me ASAP, pleading you all, please. i have also posted in talksonymobile.com, please somebody help me, please guys
Click to expand...
Click to collapse
is only happening with .42 ?
maybe the file is corrupted
did u download it by download accelerators ?
if it was .zip or .rar try repair option in winrar
u dont need to downgrade to .42 to root it you cant root .62 it by flashing attachment via cwm
download .62 and flash that and root it with the attachment
hossein7292 said:
is only happening with .42 ?
maybe the file is corrupted
did u download it by download accelerators ?
if it was .zip or .rar try repair option in winrar
u dont need to downgrade to .42 to root it you cant root .62 it by flashing attachment via cwm
download .62 and flash that and root it with the attachment
Click to expand...
Click to collapse
How will he boot into CWM without having root access?! Only if he has unlocked bootloader!
iamdchosen1 said:
How will he boot into CWM without having root access?! Only if he has unlocked bootloader!
Click to expand...
Click to collapse
Unlocked bootloader = able to install custom kernels.
Custom kernels = cmw recovery included!!!
gregbradley said:
Unlocked bootloader = able to install custom kernels.
Custom kernels = cmw recovery included!!!
Click to expand...
Click to collapse
thanx for reply
guys, i just downloaded .62 and tried flashing, badnews is , even my phones own software also is getting stuck @ same system.sin file, now im really terrified, pls help, i installed all drivers again, it is getting stuck @ same 12%, AND PLEASE TELL ME HOW MUCH MAXIMUM TIME WILL IT TAKE TO FLASH TO EITHER .62 OR .42
thunderstorm20 said:
guys, i just downloaded .63 and tried flashing, badnews is , even my phones own software also is getting stuck @ same system.sim file, now im really terrified, pls help
Click to expand...
Click to collapse
Try downloading the files again, it may be corrupted a download. You may try using a different computer. You can also try flashing an ICS image.
If you still have locked bootloader you can use SUS or PC Companion to try repairing your phone.
There is another option called WotanServer but it is not free, it will cost you about 2 EUR.
PCCompanion (Or SEUS) will always fix your phone as long as you have not unlocked bootloader.
It will restore your phone to the latest "Out of the box" official firmware.
Google and download and follow the instructions.
If it says your phone already has the latest software click on "repair phone".
Remember, if you have NOT unlocked the bootloader yet you CANNOT break the phone permantly....PCCompanion will always restore it.
hey guys, its working, some how, didnt try anything new, just kept on trying all combinations, some how it worked, all thanks to you ppl, hey, if i update my OS via PC COmpanion will it get UNROOTED? first of all how to find out whether my phone is rooted or not? and if i want a rooted ICS wat shud i do? please tel me, ALL HAIL XDA, bravo to all!! love u
thunderstorm20 said:
hey guys, its working, some how, didnt try anything new, just kept on trying all combinations, some how it worked, all thanks to you ppl, hey, if i update my OS via PC COmpanion will it get UNROOTED? first of all how to find out whether my phone is rooted or not? and if i want a rooted ICS wat shud i do? please tel me, ALL HAIL XDA, bravo to all!! love u
Click to expand...
Click to collapse
Dont forget the thanks button...
OK, what are the bottom 5 listings in the about phone section in settings...
From that we can get you rooted...
thunderstorm20 said:
hey guys, its working, some how, didnt try anything new, just kept on trying all combinations, some how it worked, all thanks to you ppl, hey, if i update my OS via PC COmpanion will it get UNROOTED? first of all how to find out whether my phone is rooted or not? and if i want a rooted ICS wat shud i do? please tel me, ALL HAIL XDA, bravo to all!! love u
Click to expand...
Click to collapse
Here is a guide for rooted ICS :
http://forum.xda-developers.com/showthread.php?t=1683742
gregbradley said:
Dont forget the thanks button...
OK, what are the bottom 5 listings in the about phone section in settings...
From that we can get you rooted...
Click to expand...
Click to collapse
thanks for letting me know abt the thanks button, and below attached are the last 5 listings,
and hey guys, i desperately wanna use USB OTG, can i use USB OTG on my ROOTED GB?
thank you
thunderstorm20 said:
thanks for letting me know abt the thanks button, and below attached are the last 5 listings,
and hey guys, i desperately wanna use USB OTG, can i use USB OTG on my ROOTED GB?
thank you
Click to expand...
Click to collapse
OK, Download flashtool and use that to root and install a recovery. You can also unlock the bootloader (If you want).
Then you will be able to install any ROM you want.
As for usb otg, read it up in the theme and app section.
gregbradley said:
OK, Download flashtool and use that to root and install a recovery. You can also unlock the bootloader (If you want).
Then you will be able to install any ROM you want.
As for usb otg, read it up in the theme and app section.
Click to expand...
Click to collapse
thanks for all the help dude, im off to theme section
gregbradley said:
PCCompanion (Or SEUS) will always fix your phone as long as you have not unlocked bootloader.
It will restore your phone to the latest "Out of the box" official firmware.
Google and download and follow the instructions.
If it says your phone already has the latest software click on "repair phone".
Remember, if you have NOT unlocked the bootloader yet you CANNOT break the phone permantly....PCCompanion will always restore it.
Click to expand...
Click to collapse
dont bet on SEUS OR PCCompanion
They wont always be there to help you.
Once i did a wrong fashing and the phone would boot.
(i was a begginer and i had no back up)
Seus wouldn't recognize my mobile and wouldn't let me repair it.
no final verification box missing
hello guys,
Am sorry to be off topic, but I need answer to this question. I was about to use flashtool 6.9. when I discovered that the boxes for 'no final verification' and 'exclude T.A' are missing. what can I do? thanks.
So... I realize there's multiple threads of people asking help on unbricking in general, but I accidentally re-locked the bootloader before flashing a stock kernel.
... Is this phone now a lost cause?
lolstebbo said:
So... I realize there's multiple threads of people asking help on unbricking in general, but I accidentally re-locked the bootloader before flashing a stock kernel.
... Is this phone now a lost cause?
Click to expand...
Click to collapse
Repair it with PC Companion or SEUS.
And why did you relock the bootloader???
SmG67 said:
Repair it with PC Companion or SEUS.
And why did you relock the bootloader???
Click to expand...
Click to collapse
It keeps giving me a "no software is available for your phone" message.
I meant to flash the stock kernel on it, but, for some reason, I brain farted and accidentally locked the bootloader.
lolstebbo said:
It keeps giving me a "no software is available for your phone" message.
I meant to flash the stock kernel on it, but, for some reason, I brain farted and accidentally locked the bootloader.
Click to expand...
Click to collapse
If you're on gingerbread or lower than you should be able to unlock it again with flashtool, as far as i'm aware. Try a stock firmware flashable with flashtool, there should be some available in the x10mini pro development section of this forum.
SmG67 said:
If you're on gingerbread or lower than you should be able to unlock it again with flashtool, as far as i'm aware. Try a stock firmware flashable with flashtool, there should be some available in the x10mini pro development section of this forum.
Click to expand...
Click to collapse
I can't even get Flashtool to recognize it, though; it was on MiniCM10 and nAa's kernel before the accident. I have the stock ROM and kernel ready, I just.... did the wrong step first on accident.
lolstebbo said:
I can't even get Flashtool to recognize it, though; it was on MiniCM10 and nAa's kernel before the accident. I have the stock ROM and kernel ready, I just.... did the wrong step first on accident.
Click to expand...
Click to collapse
You don't need to have it recognised in order to flash it... just put it in flashmode...
SmG67 said:
You don't need to have it recognised in order to flash it... just put it in flashmode...
Click to expand...
Click to collapse
It doesn't work; I can't even get to the bootloader unlock opinion. The "Plugins" drop-down menu is empty and fastboot gives me an error message when I try to flash anything.
I guess it's R.I.P for this phone?
lolstebbo said:
It doesn't work; I can't even get to the bootloader unlock opinion. The "Plugins" drop-down menu is empty and fastboot gives me an error message when I try to flash anything.
I guess it's R.I.P for this phone?
Click to expand...
Click to collapse
I hope you meant to say flashtool, and not fastboot? our phones don't support fastboot. Always choose flashmode...
The Plugins drop-down should be empty because the ROM you're on is unsupported for the unlock-plugin.
However, you should be able to flash the stock kernel, Hold on...
This should be flashable with flashtool. I can't guarantee that it will make your phone work properly, but it will give you back the stock kernel, and possible enable you to unlock your bootloader again, or at least enable you to flash the other firmware you had lying around...
SmG67 said:
I hope you meant to say flashtool, and not fastboot? our phones don't support fastboot. Always choose flashmode...
The Plugins drop-down should be empty because the ROM you're on is unsupported for the unlock-plugin.
However, you should be able to flash the stock kernel, Hold on...
This should be flashable with flashtool. I can't guarantee that it will make your phone work properly, but it will give you back the stock kernel, and possible enable you to unlock your bootloader again, or at least enable you to flash the other firmware you had lying around...
Click to expand...
Click to collapse
ohmygodiloveyousomuchrightnow. Thanks so much. It can boot up now, but nothing responds after it boots into the lock screen. Beats the phone being completely bricked, though.
lolstebbo said:
ohmygodiloveyousomuchrightnow. Thanks so much. It can boot up now, but nothing responds after it boots into the lock screen. Beats the phone being completely bricked, though.
Click to expand...
Click to collapse
The same thing happened to my xperia mini pro (U20a) when trying to update through SEUS and the software in the pc (PC companion) crashed by performing an illegal operation(Now it is no longer recognized by seus). This result my phone turning into a brick with only a big triangle with ! mark and a phone's picture was displayed on the screen when it turned on. I have never rooted the phone or installed Xrecovery/busybox (learned about them from this forum threads only). So I was anxiously following this thread and installed Flashtool and downloaded the ftf file (220MB) specified in this thread. Then voila, the flash was successful with this and the phone switched on. Now the second level of problem starts. None of the keys ( even the power key) or touch screen responds once the phone boots up.However the SIM is responding to the incoming calls (although cannot receive them as the touch screen is not operational). The battery is 100% charged and sim signal is 100% with sd card successfully mounted . Every time I need to remove the battery to switch it off. The display is now showing current date time (in a blue background) and a lock(left) and speaker (right) icons. Everything is stalled here. Downloaded two more firmwares and bundled them(sin files) in flash tool, but none worked except this fft file.
Please help
PS I have attached the flash tool log file for this flash.
To both of you: Try Repair with PC Companion.
1. Leave the phone unplugged
2. Start PC Companion
3. Choose Support Zone
4. Choose Update
5. It can find no update because your phone is unplugged
6. Click the Repair-link it shows
7. Follow the instructions from there on.
Hope that works, if not: Download this and flash with flashtool.
Thanx for the quick reply.
I have started the pc companion and go to the repair option. However after selecting the model from the list, it started updating. Then BANG!! Again the program performed an illegal operation and shutdown by the window XP.. The entire PC screen hanged and I had to manually kill it by pressing ALT+Ctrl+Del . So it seems this method will not work in my laptop.
Downloading your FTF file and trying it in flash tool. Hope it will work.:crying:
PS: your link is now pointing to the zip file and I have tried the UK version of that already ( by building the ftf from sin files in flash tool) with no improvement. Can you give a ftf file directly like the last one ? Thanx in advance.
bukaida said:
Thanx for the quick reply.
I have started the pc companion and go to the repair option. However after selecting the model from the list, it started updating. Then BANG!! Again the program performed an illegal operation and shutdown by the window XP.. The entire PC screen hanged and I had to manually kill it by pressing ALT+Ctrl+Del . So it seems this method will not work in my laptop.
Downloading your FTF file and trying it in flash tool. Hope it will work.:crying:
PS: your link is now pointing to the zip file and I have tried the UK version of that already ( by building the ftf from sin files in flash tool) with no improvement. Can you give a ftf file directly like the last one ? Thanx in advance.
Click to expand...
Click to collapse
No need to make it yourself, just rename the zip-file you download to .ftf and flash it.
SmG67 said:
No need to make it yourself, just rename the zip-file you download to .ftf and flash it.
Click to expand...
Click to collapse
Renamed the file from zip to ftf and put it inside the firmwares folder under flash tool. But during firmware selection while flashing, it is not showing anything ( only your earlier ftf file is visible). Am I doing something wrong?
bukaida said:
Renamed the file from zip to ftf and put it inside the firmwares folder under flash tool. But during firmware selection while flashing, it is not showing anything ( only your earlier ftf file is visible). Am I doing something wrong?
Click to expand...
Click to collapse
Possibly... Rename it to U20.ftf and see if it shows up in the list then
SmG67 said:
Possibly... Rename it to U20.ftf and see if it shows up in the list then
Click to expand...
Click to collapse
Renamed from original UK_2.1_minipro.zip to U20.ftf but still not visible in firmware list. Screenshot attached.
bukaida said:
Renamed from original UK_2.1_minipro.zip to U20.ftf but still not visible in firmware list. Screenshot attached.
Click to expand...
Click to collapse
Did you remove the other one you flashed earlier?
Not sure what's going wrong there, it should show up...
You did restart flashtool?
If you are still there
I removed and reinstalled the flash tool. Followed the procedure discussed so far. Still it is not showing in the list.Screen shot attached. The U20 option which is showing is for your earlier ftf file (kernel_locked) and not the renamed one (however if I bundle the sin files and create the ftf by specifying build number, version etc..) it is showing. However , flushing with that made no improvement. It took sometime to respond as I was trying these.
bukaida said:
I removed and reinstalled the flash tool. Followed the procedure discussed so far. Still it is not showing in the list.Screen shot attached. The U20 option which is showing is for your earlier ftf file (kernel_locked) and not the renamed one (however if I bundle the sin files and create the ftf by specifying build number, version etc..) it is showing. However , flushing with that made no improvement. It took sometime to respond as I was trying these.
Click to expand...
Click to collapse
Try this
SmG67 said:
Try this
Click to expand...
Click to collapse
My bandwidth for this month has ended. However I still have night unlimited facility. So I will download it at night. One more thing, when the download is handled by firefox, the file size is showing as 120 MB but in Internet Download manager, it is 213MB. What is the actual size ?
Hi, sorry to xda for posting in bad sections in the past but i am dumb hence my problem please please please help
I have mb860 i think i have emara as firmware? when i browse through my backup files from titanium backup in text mode i see android 2.3.4 then emara and its version...
I cant fully check this all because my phone is not working and only boots into android recovery. I have stock, my bootloader is not unlocked. I tried flashing over cwm into the recovery partition and got an error basocally saying my bl was locked, so i tried some fixes with fastboot but both methods gave me "(bootloader)OEM unlock not implementable"
So i dont know how to unlock bl, which means i dont know how to open a adb shell and move around my phone...
Also i got rsd lite (i never used this when i programed for android) because i wanted to push an entire sbf.. Only problem is every sbf link is broken for my version that i find and even xda links to a filefsctory depository wich is littered with actual viruses...
My head really hurts so if anyone can help im so sorry if im not clear i will try hard to explain just ask.... I havnt slept since it happened about 40 or 50 hours ago?
Oh yeah what happened?
I moved an app called "system tuner" out of /sys and instantly got notifications telling me applications were force closing... They were back to back and i could not long hold home and just move system tuner back and ignore them, i tried and almost made it to move system tuner back but then all i saw was a vertical display of my battery being charged....... Now i can boot into android recovery mode and nvflash fastboot rsd and about 7 more...
I thought i had luck with usb enumeration and that would make it go as usb mass storage and i could do something. And my usb driver read it as a usb storage device but it didnt work.
I have a backup of user and syte, data by backup titanium on my pc thats how i saw i had 2.3.4... The update.zip backup is on my phone... Speaking of that can i somehow fix my problem by putting a .zip file on my phone? To repopulate it? I think its all gone????
EDIT: MY BLOOTLOADER IS LOCKED... IM 99%
And idk if it means anything when i plug into rsd mode, my ui on my pc tells me im connected to "se flash olympus" which is all good but it doesnt have an (imei/esn/meid) number.?????
leathan said:
Hi, sorry to xda for posting in bad sections in the past but i am dumb hence my problem please please please help
I have mb860 i think i have emara as firmware? when i browse through my backup files from titanium backup in text mode i see android 2.3.4 then emara and its version...
I cant fully check this all because my phone is not working and only boots into android recovery. I have stock, my bootloader is not unlocked. I tried flashing over cwm into the recovery partition and got an error basocally saying my bl was locked, so i tried some fixes with fastboot but both methods gave me "(bootloader)OEM unlock not implementable"
So i dont know how to unlock bl, which means i dont know how to open a adb shell and move around my phone...
Also i got rsd lite (i never used this when i programed for android) because i wanted to push an entire sbf.. Only problem is every sbf link is broken for my version that i find and even xda links to a filefsctory depository wich is littered with actual viruses...
My head really hurts so if anyone can help im so sorry if im not clear i will try hard to explain just ask.... I havnt slept since it happened about 40 or 50 hours ago?
Oh yeah what happened?
I moved an app called "system tuner" out of /sys and instantly got notifications telling me applications were force closing... They were back to back and i could not long hold home and just move system tuner back and ignore them, i tried and almost made it to move system tuner back but then all i saw was a vertical display of my battery being charged....... Now i can boot into android recovery mode and nvflash fastboot rsd and about 7 more...
I thought i had luck with usb enumeration and that would make it go as usb mass storage and i could do something. And my usb driver read it as a usb storage device but it didnt work.
I have a backup of user and syte, data by backup titanium on my pc thats how i saw i had 2.3.4... The update.zip backup is on my phone... Speaking of that can i somehow fix my problem by putting a .zip file on my phone? To repopulate it? I think its all gone????
EDIT: MY BLOOTLOADER IS LOCKED... IM 99%
And idk if it means anything when i plug into rsd mode, my ui on my pc tells me im connected to "se flash olympus" which is all good but it doesnt have an (imei/esn/meid) number.?????
Click to expand...
Click to collapse
So basically what you're saying is you have a stock device, locked bootloader, and you failed to read the directions about unlocking (pudding sbf, oem unlock, custom recovery). How do you expect to flash custom roms or custom recoveries with a locked bootloader?
palmbeach05 said:
So basically what you're saying is you have a stock device, locked bootloader, and you failed to read the directions about unlocking (pudding sbf, oem unlock, custom recovery). How do you expect to flash custom roms or custom recoveries with a locked bootloader?
Click to expand...
Click to collapse
What do you mean failed to read the instructions, i have done this before ... and i even thought flashing was actually one way to unlock the bl. Also i followed more than one tutorial explaining how to unlock the bl.
How do i expect to flash over a stock recovery?
I really dont know man im asking for help i just tried using rsd lite to flash a 2.3.6 att firmware stock rom...
My head hurts help me out what should i do?
leathan said:
What do you mean failed to read the instructions, i have done this before ... and i even thought flashing was actually one way to unlock the bl. Also i followed more than one tutorial explaining how to unlock the bl.
How do i expect to flash over a stock recovery?
I really dont know man im asking for help i just tried using rsd lite to flash a 2.3.6 att firmware stock rom...
My head hurts help me out what should i do?
Click to expand...
Click to collapse
You can use sbf as a means of unlocking bl... RIGHT..... ?...
Also idk if you read but i cant properly boot up so i need to use adb or fastboot or rsd... Right....? Maybe i explained things bad? I think with a sbf that is compatible ill be ok... Or maybe help unlocking bl first? I need help i tried alot on my own...
Don't you ever flash an SBF, they are not safe.
Unlock bootloader
Flash recovery
Flash stock 2.3.6 fruitcake
DONE!
Feche said:
Don't you ever flash an SBF, they are not safe.
Unlock bootloader
Flash recovery
Flash stock 2.3.6 fruitcake
DONE!
Click to expand...
Click to collapse
The xda tutorial had be download ihop_bell.sbf ???? Pretty sure im bricking my phone now.... Can not find working unlock code, or working sbf. And right now my phones stuck flashing something... Its stuck on "phone being booted" ill let it go till battery drains... Or close... But yeah ithink i brinked it... Ill let you know
Edit: it said finished checking...
Edit2: HOLY BUUTMUNCHES!! i did the exact same thing as always and this time it worked!! Bootloader unlocked!! I have no idea what i did differentlY.. I SWER I DID THIS BEFORE.. Im not uber dumb.. Oooookie im so happy so now i can get custom rom!!!!??? I just wanted stock but i cant find that lol... Gunna try pushing cwm to recovery again...
leathan said:
You can use sbf as a means of unlocking bl... RIGHT..... ?...
Also idk if you read but i cant properly boot up so i need to use adb or fastboot or rsd... Right....? Maybe i explained things bad? I think with a sbf that is compatible ill be ok... Or maybe help unlocking bl first? I need help i tried alot on my own...
Click to expand...
Click to collapse
SUCCESS!!! Any links for something good i can install now? I havnt used cwm in years. Help a bit with links... I here cm7 is good... Believe it or not im actually not an adroid noob... Im just a noob period. Anyway i redid the process of flashing an sbf that would allow me to unlock bootloader... The 4th time i did it it worked. I have a veru very very very very bad laptop maybe thats why? Or im just a noob. Regardless its fixed and im so happy thats to the user who treated me like a noob it made me go back and redo everything i had done
Search for a 2.3.6 fruitcake, that is stock.
---------- Post added at 03:12 AM ---------- Previous post was at 03:02 AM ----------
Here you have stock fruitcakes http://www.das8nt.com/sbffiles.html
Feche said:
Search for a 2.3.6 fruitcake, that is stock.
---------- Post added at 03:12 AM ---------- Previous post was at 03:02 AM ----------
Here you have stock fruitcakes http://www.das8nt.com/sbffiles.html
Click to expand...
Click to collapse
Much thanks... Google -> 2.3.6 fruitcake update.zip
Thats what im searching...?
Oops i m dumb ok got it!
Just got new Xperia 1 from o2 try flashing to general retailers firmware, but flashtool and newflasher both not work
xerien said:
Just got new Xperia 1 from o2 try flashing to general retailers firmware, but flashtool and newflasher both not work
Click to expand...
Click to collapse
Is the bootloader unlockable on a device from O2?
kxf41 said:
Is the bootloader unlockable on a device from O2?
Click to expand...
Click to collapse
yes，the bootloader allowed unlock
xerien said:
Just got new Xperia 1 from o2 try flashing to general retailers firmware, but flashtool and newflasher both not work
Click to expand...
Click to collapse
Newflasher doesn't work for me either.
Are you getting any error messageson NewFlasher?
Mines also from O2 UK and I'm trying to flash generic firmware.
I'm guessing we need a FSC Script for flashtool.
xerien said:
yes，the bootloader allowed unlock
Click to expand...
Click to collapse
With the earlier Xperia phones you needed to unlock the bootloader before flashing (that you are allowed to unlock doesn't mean that your bootloader is unlocked). To unlock you need the script and the code from Sony. At the moment I don't remember where to get both (script and code). And what about DRM-keys?, is it there a TA-partition to backup before unlocking? And so on...
I uploaded an update for newflasher here: github.com/munjeni/newflasher/issues/6. Tested with J9110.
whoosename said:
With the earlier Xperia phones you needed to unlock the bootloader before flashing (that you are allowed to unlock doesn't mean that your bootloader is unlocked). To unlock you need the script and the code from Sony. At the moment I don't remember where to get both (script and code). And what about DRM-keys?, is it there a TA-partition to backup before unlocking? And so on...
Click to expand...
Click to collapse
Never needed to unlock bootloader to flash stock firmware with Flashtool or Newflasher
noelex said:
I uploaded an update for newflasher here: github.com/munjeni/newflasher/issues/6. Tested with J9110.
Click to expand...
Click to collapse
J8110 passed test ,thank you body，sometime was shown erro 997, just unplug and do again,thank you!!!!!
Works great but causes bootloop if you want to keep user data.
xerien said:
J8110 passed test ,thank you body，sometime was shown erro 997, just unplug and do again,thank you!!!!!
Click to expand...
Click to collapse
How did you use the 2 files in the patch? Just copied them to Newflasher folder and run the whole process with the new .exe file?
How many times did you get error 997? Did you redo the whole process from the beginning or did you just unplug and replug the phone while the process was running?
Thnx
New version v14 is out!
I guess you have not installed Gordon Gate driver.
Did anyone check the new version of Newflasher on Xperia 1?
stakyr said:
Did anyone check the new version of Newflasher on Xperia 1?
Click to expand...
Click to collapse
Hi, it seems work, see 2 comments before end of comments -> https://github.com/munjeni/newflasher/issues/6
Noelex confirm that newflasher working. I have included all patches including on from noelex. Only which might not work (I'm believing it will work) is partition folder flashing, if you flash it please post newlfasher log (post it in neflasher thread), I need to be sure everything is right!
munjeni said:
Hi, it seems work, see 2 comments before end of comments -> https://github.com/munjeni/newflasher/issues/6
Noelex confirm that newflasher working. I have included all patches including on from noelex. Only which might not work (I'm believing it will work) is partition folder flashing, if you flash it please post newlfasher log (post it in neflasher thread), I need to be sure everything is right!
Click to expand...
Click to collapse
I ll flash my new phone next week. Once I am done I ll let you know. Thnx for your efforts.
any news on when flashtool will support xperia 1?
swooc said:
any news on when flashtool will support xperia 1?
Click to expand...
Click to collapse
Best you ask in that respective thread. https://forum.xda-developers.com/showthread.php?t=920746
Hello guys,
I managed to flash my new Xperia 1 to Customized UK and EE UK firmware without problems. I didnt delete anything like .ta files etc. I just copied newflasher files to Firmware Folder, downloaded from XperiFirm and run Newflasher.exe in flash mode.
Vodafone UK carrier lock still exists after flashing though!
I am trying to get an unlock code for this from a seemingly legit site. (fingers crossed)
stakyr said:
Hello guys,
I managed to flash my new Xperia 1 to Customized UK and EE UK firmware without problems. I didnt delete anything like .ta files etc. I just copied newflasher files to Firmware Folder, downloaded from XperiFirm and run Newflasher.exe in flash mode.
Vodafone UK carrier lock still exists after flashing though!
I am trying to get an unlock code for this from a seemingly legit site. (fingers crossed)
Click to expand...
Click to collapse
Can you point me to which USB drivers you used? I can't for the life of me get my PC, to recognize the phone in flash mode.
Fidelio_o said:
Can you point me to which USB drivers you used? I can't for the life of me get my PC, to recognize the phone in flash mode.
Click to expand...
Click to collapse
Download Flashtool, install it, then go to folder c:\\flashtool\drivers and install driver package, checking the first two options, flashtool and fastboot drivers. Then your mobile will be discoverable in flash mode. Shut down your phone and while turned off, keep volume down button pressed while connecting usb cable, till green light shows up