Hello everyone !
Heres a new rom..
This rom is from taiwan made by Youzii.
- Build 18125
- No Cube, but TouchFLO and Touch Comm manager
- Including some tools and apps (Pocket RAR, psshutxp, pbar, and more!)
- Very stable and fast !
- Page Pool is 6 MB !
NOTE !
I have just updated this version and it works very well, BUT you might use the NVID WM5 rom before you flash this one, NOT the one which is included.. That made my phone start to boot loader..
Download Link:
Here
I have changed the files a little so they now look more like the ones we are used to..
http://da9l.4shared.com/
1. Under the EVO7 folder download both EVO7.part1.rar and EVO7.part2.rar
2. Begin with the extraction of part 1.. Run the exe thats the right for you
3. Now after flashing is done remain the pda unused and extract EVO7.part2.rar
4. Run Upgrade_Rom.bat and wait for its completion. Do as the utility tells you to
5. And now the rom should be installed !
Pictures in the bottom if the thread!
Thank You For ROM
All is OK
The page pool is 6mb.
Thank you ! will update it !
Thank you for sharing, Da9L!!
As in EVO7tw, Cube and HTCHome can be installed in EVO7en indepandantly with removable cab files later.^^
Visit http://cid-8231c261cbdd4326.skydrive.live.com/browse.aspx/818EVO/EVO7en to download the long-waited Cube and HTCHome cabs now!!
Thank Support for the mirrors:
http://rapidshare.com/files/51991260/EVO7en.part1.exe
http://rapidshare.com/files/51991566/EVO7en.part2.rar
-------------------------------------------------------------------
How to falsh your device to EVO7：
-------------------------------------------------------------------
1.Flash PV_TEMP (download PV_Temp http://tom-love.net/Rom/Prophet/WM6....et_PV_Temp.zip )
2.Install Cert_SPCS.cab、EnableRapi.cab to the wm5 PVTEMP (your ppc).
3.Execute EVO7.part1.exe >> choose upgrade method 3 (No bother to try part 2, double click EVO7.1 Part 1 will do the tricks)
Note: Part 1 and Part 2 are the same file devided into two parts. The former is a self-decompressing file which associates the latter by itself)
4.Wait for 20 mins or so. (or you may like to check PdocWrite out in your PC for time's saving.)
5. 1st device configuration (the first time)
6.Hard-reset (type 1234 on Clear Storage, rather than hold two buttons + the tiny hole pricking, is strongly recommanded).
7. 2nd device configuration (the second time)
8. Start enjoying your "brand-new" device!
-------------------------------------------------------------------
Wanna try EVO7tw (with removable Cube and HTCHome)?? Here is the link to the original thread:
http://www.mobile01.com/topicdetail.php?f=224&t=385791&last=3478621
Tips: ---------------------------------------------------------------------
1. The default region is Taiwan which can be changed at "Start\Settings\System\Regional Settings\Region.
2. Support Far-East characters including troditional Chinese, simplified Chinese, Japanese, and Korea, etc,. To display the characters properly please set the region accordingly at the same path above.
3. It's strongly recommanded to update the new version of G4 SIP Tweak, a third party application incorporated in EVO7en, for a better dispaly to the app.
4. The blue lines on the uppermost screen is an application to show battery and memory status on the left and right part respectively. Disable it by deleting pwrstat.lnk at the folder of Windows\Startup if it is not right to your eye^^|||
5. If you prefer the original contacts, disable the built-in PocketCM by assing the right soft-button to Contacts with Soft Key at Start\Settings\System.
6. No higher than 264MHz over-clock is recommanded for stability, though 274MHz works fine for some devices.
7. The clock on the upper menu bar can be changed to the battery icon by editing the value of registry as below:
[HKEY_LOCAL_MACHINE\Software\Microsoft\Shell] "ShowTitleBarClock"=dword:0 >> battery display (1 = clock display)
8. Button 4 is yet to assign. Do it with Buttons at Start\Settings.
9. Edit the values of registry as below to modify the sensitivity of Touchflo (finger scrolling):
HKEY_LOCAL_MACHINE\Software\OEM\TFLOSettings "SpeedHigh" (20 is recommanded) and "SpeedLow" (65 is recommanded).
10. To edit registry, you may like to run the built-in Task Manager at "Today\Programs\Tools". There is an app named RegEdit listed on the buttom of the menu.
11. X-button, thanks to the freelancer contributing it, seems to take to built-18125 better than pBar 1.4. (my case is that there are always 20M or so left no matter how long the device runs)
12. For whom like to read Thai characters properly, please visit the EVO7en link to download EVO extFont.cab
13. Original IM (原生輸入法) installation:
Copy all files OriginalIM.zip into the Windows folder
Import the registry file PhonIM.zip (注音輸入法).
Chajeiim (倉頡輸入法) and Mboxcht (手寫板輸入法) installation:
Copy the AdditionalDll.zip files into Windows
Import All_Chtim.reg instead.
You'll get all three input methods at once.
OriginalIM >> http://forum.xda-developers.com/attachment.php?attachmentid=48906&d=1188663728
PhonIM >> http://forum.xda-developers.com/attachment.php?attachmentid=48907&d=1188663758
AdditionalDll >> http://forum.xda-developers.com/attachment.php?attachmentid=48908&d=1188663783
AllChiIM >> http://forum.xda-developers.com/attachment.php?attachmentid=48909&d=1188663798
14. To get Chinese lunar calendar, change the value of the Dword, "ShowLunarCalendar", under "HKEY_LOCAL_MACHINE\Software\Microsoft\Calendar" from "0" to "1"
15. The letters chopped on the setting pages can be sloved by editing the registry as below: (Note: not for Chinese users)
[HKEY_LOCAL_MACHINE\nls] "SystemLCID"=dword:404 << change dword from 404 to 409
16. Users who are not good at modifying registry please install EVO ENGfix.cab to fix the letter-chopping problem on some setting pages.
http://forum.xda-developers.com/attachment.php?attachmentid=49966&d=1189363816
17. For whom who like to have the setting pages for HTCHome, please install EVO HTCHomeSettings.cab.
http://forum.xda-developers.com/attachment.php?attachmentid=49970&d=1189364038
18. Users who like to check your namelist with Celedial instead of the default SmartDialing, please modify the registry as below:
[HKEY_LOCAL_MACHINE\Security\Phone\Skin]
change the path from "Ext"="\\windows\\phcanhtc.dll" to "Ext"="\\windows\\celedial1.dll" (reboot your device to get it^^)
--------------------------------------------------------------------------
Note: The Evo7 series supports devices listed as below:
* SPV M600
* Qtek S200
* i-mate JAMin
* Dopod 818 Pro
* Dopod 830
* XDA neo (O2 Germany)
* VPA Compact S (Vodafone Germany)
* TC 500 (T-Home Germany)
evo7 EN .....
Flashed and using in the speed of 264. Everything goes so fine, I like its WLM version .2600, no need to mess up my contacts information ......
and I like the function of touchflo although its a bit too sensitive for my clumsy thumb.... ^_^
kool job. ^_^
SUPPORT!!
dioxda2 said:
Flashed and using in the speed of 264. Everything goes so fine, I like its WLM version .2600, no need to mess up my contacts information ......
and I like the function of touchflo although its a bit too sensitive for my clumsy thumb.... ^_^
kool job. ^_^
SUPPORT!!
Click to expand...
Click to collapse
Edit the values of registry as below to modify the sensitivity:
HKEY_LOCAL_MACHINE\Software\OEM\TFLOSettings
SpeedHigh (20 is recommanded)
SpeedLow (65 is recommanded)
To edit registry, please run the built-in Task Manager at "Today\Programs\Tools". There is an app named RegEdit listed on the buttom of the menu.
iiiox said:
Edit the values of registry as below to modify the sensitivity:
HKEY_LOCAL_MACHINE\Software\OEM\TFLOSettings
SpeedHigh (20 is recommanded)
SpeedLow (65 is recommanded)
To edit registry, please run the built-in Task Manager at "Today\Programs\Tools". There is an app named RegEdit listed on the buttom of the menu.
Click to expand...
Click to collapse
Dear iiiox,
noted, set, enjoying now!! ^_^
Thai font display incorrect
Thai font cannot display on today screen, how can I solve this problem?
I already change regional setting to "Thai".
thanks
ITS NOT WORK!
first step: i did upgrade by ROMUpdateUtility_NV_G4
*then HARD-RESET
when Windows 5 was loaded i started UPGRADE_ROM -
new OS not uploaded into device :/
(
extracted OS
Initializing...........End Time
)
G4 SIP Tweak.cab
Hi There,
Can anyone inform me what is G4 SIP Tweak.cab intend to. Is it only for G4 hardware ?
If i have G3 hardware , should i use it ?
Thanks
tb146 said:
Hi There,
Can anyone inform me what is G4 SIP Tweak.cab intend to. Is it only for G4 hardware ?
If i have G3 hardware , should i use it ?
Thanks
Click to expand...
Click to collapse
Hi, nothing has to do with G3 or G4 chips. It's an application to set the default loaded IM (input method), to hide uncessary IMs, and to assign the default display of fonts.
Big Brother iiiox is promoting EV07 English version here! This is a very great ROM. I am using the Chinese version now. It is very stable and fast.
One more important thing is that for all who prefer the BT sound quality of Fantastic B4 but not pleased with its stability and speed, this one will be your solution. Per Youzhi, he has used the A2DP driver from P800W. You will not hear any hiss sound under this ROM. I have tested it with my iTech S38 and Sony HBH-DS220 with great level of satisfaction.
Try it and you will love this ROM!
mark_vip said:
ITS NOT WORK!
first step: i did upgrade by ROMUpdateUtility_NV_G4
*then HARD-RESET
when Windows 5 was loaded i started UPGRADE_ROM -
new OS not uploaded into device :/
(
extracted OS
Initializing...........End Time
)
Click to expand...
Click to collapse
Not totally sure what your point is. If it is that your device failed to upgrade from wm5 to EVO7, try the steps listed below.
How to falsh your device to EVO7：
1.Flash PVTEMP (you can find it at the forum everywhere, literally speaking^^")
2.Install Cert_SPCS.cab、EnableRapi.cab to the wm5 PVTEMP (your ppc).
3.Execute EVO7.part1.exe >> choose upgrade method 3 (No bother to try part 2, double click EVO7.1 Part 1 will do the tricks)
Note: Part 1 and Part 2 are the same file devided into two parts. The former is a self-decompressing file which associates the latter by itself)
4.Wait for 20 mins or so. (or you may like to check PdocWrite out in your PC for time's saving.)
5. 1st device configuration (the first time)
6.Hard-reset (type 1234 on Clear Storage, rather than hold two buttons + the tiny hole pricking, is strongly recommanded).
7. 2nd device configuration (the second time)
8. Start enjoying your "brand-new" device!
iiiox said:
Hi, nothing has to do with G3 or G4 chips. It's an application to set the default loaded IM (input method), to hide uncessary IMs, and to assign the default display of fonts.
Click to expand...
Click to collapse
Thank you bro for your explanation.... downloading now...
I will flash step 1 with PV Temp ..then EVO7.1 part2 , is it right ?
Perhaps you can guide me how to flash this ROM.
Thanks
fungsaikit said:
Big Brother iiiox is promoting EV07 English version here! This is a very great ROM. I am using the Chinese version now. It is very stable and fast.
One more important thing is that for all who prefer the BT sound quality of Fantastic B4 but not pleased with its stability and speed, this one will be your solution. Per Youzhi, he has used the A2DP driver from P800W. You will not hear any hiss sound under this ROM. I have tested it with my iTech S38 and Sony HBH-DS220 with great level of satisfaction.
Try it and you will love this ROM!
Click to expand...
Click to collapse
Haha!! Brother fungsaikit, I'm here only because Youzii's out of sight at the time being^^" You know that I can solve few [email protected][email protected] Only if Youzii ansers calls in person here....
BTW, why don't you try EVO7en^^?? It's even faster (though fewer applications like removable HTCHome and Cube at this moment^^)
Hi, please follow the following steps:
1. Flash the PV Temp Rom;
2. Install the Cert_SPCS cab to your device;
3. Install the EnableRapi cab to your device;
4. Double the file name EVO7.1 Part 1;
5. Choose 3 on the cmd screen;
6. Wait 20 minutes at least;
7. Disconnect the USB;
8. Press the soft-reset button on the bottom. Then press the camera button and command manager button simutaneously. When you see a few lines of words on the black screen, press the phone-calling button. You will see "FAT Format is completed".
9. Enjoy!
tb146 said:
Thank you bro for your explanation.... downloading now...
I will flash step 1 with PV Temp ..then EVO7.1 part2 , is it right ?
Perhaps you can guide me how to flash this ROM.
Thanks
Click to expand...
Click to collapse
Hi, "How-to-do" had been added to the fourth post on the thread^^"
Note: Devices can be upgraded via three options. The method I posted here is the most reliable one^^
-------------------------------------------
haha!! thank yuu very much, brother fungsaikt!! both of us offered the same solution^^!
Hehehe, I am a bit lazy recently. Maybe because I flashed my 818 Pro at least 3 to 4 times a day before. Now the EVO7.1 is really fantastic. It is very stable and fast. The new method of calling out the cube can't be better in elsewhere. Also, I am playing with my new BT headset Sony HBH-DS220 these 2 days. Hehehe.... forgive me being a bit lazy to flash new ROM.
iiiox said:
Hi, "How-to-do" had been added to the fourth post on the thread^^"
Note: Devices can be upgraded via three options. The method I posted here is the most reliable one^^
-------------------------------------------
haha!! thank yuu very much, brother fungsaikt!! both of us offered the same solution^^!
Click to expand...
Click to collapse
So sorry, cannot wait to flash so i miss to read it.
Thank you guys....
Hello
Got my Viewpad 7 for almost a week now.
At the beginning only the G-Sensor/Compass was making troubles - daily calibration because when using it portrait mode the display was headlong (with top side at the bottom). This is very annoying when playing games... steering left moves the car right and so (see video).
http://www.youtube.com/watch?v=7jjoDYj-Dk4
Now the last days the other more annoying problem drives me crazy:
It seems the bottom right softkey (menu key) does his own business. Just when taking the Viewpad it vibrates and shows up the menu bar or the keyboard (see video).
http://www.youtube.com/watch?v=TrfdtMYcua8
Most of the time a reboot solves the problem, but only for a few hours or "switch-ons". It happened one-time a day at the beginning, now it's nearly every 2nd time I bring it back from stand-by!
I bought the Viewpad 7 new at ComTech.de online shop.
Does anyone know that problem? Or have an idea how it can be solved?
Regards
I had the same problem with my menu soft key. I took it to the dealer and got screen+soft keys replaced through the warranty.
Sent from my HTC Sensation Z710e using XDA App
Hmm, another user here seems to have the same problem:
http://forum.xda-developers.com/showthread.php?t=1253845
Also HWVer 103 - perhaps this issue is only on pre-ITE devices?
try install custom rom... sometimes root permission make my accelerometer inversing...
I haven't rooted anything nor have I installed a custom ROM.
It's a complete unmodified stock ROM.
astuermer said:
I haven't rooted anything nor have I installed a custom ROM.
It's a complete unmodified stock ROM.
Click to expand...
Click to collapse
hardware fault i think....
I got the same problem with my settings button...
Any suggestions?
Settings button = Menu Softkey?
(the leftmost softkey when in portrait mode with softkeys at the bottom)
If yes, touchscreen/Softkeys has to be changed.
i had this problem, i found that after rooting my screen was the wrong orintation, but having cleared the devlic cache via CM twice, i now havnot got this issue for at least 4 days, so i guess its cured.... will report when i know more
Software solution
This is a solution from a user 'retrochip' from 4pda.ru forum
(Link to original post in Russian and i'm not able to post is here)
1. Root your device (can be done with Gingerbreak)
2. Find out codes for Menu button and Search button (229 and 217)
3. Edit configuration file /system/usr/keylayout/qwerty.kl (you can use RootExplorer)
In qwerty.kl:
Find text:
key 217 SEARCH WAKE_DROPPED
and change to:
key 217 MENU WAKE_DROPPED
Find text:
key 229 MENU WAKE_DROPPED
and change to (just comment it with #):
#key 229 MENU WAKE_DROPPED
Save and reboot.
Now Menu button isn't active and Search button works as a Menu button.
No annoying random popping keyboard anymore.
shuzzle said:
This is a solution from a user 'retrochip' from 4pda.ru forum
(Link to original post in Russian and i'm not able to post is here)
1. Root your device (can be done with Gingerbreak)
2. Find out codes for Menu button and Search button (229 and 217)
3. Edit configuration file /system/usr/keylayout/qwerty.kl (you can use RootExplorer)
In qwerty.kl:
Find text:
key 217 SEARCH WAKE_DROPPED
and change to:
key 217 MENU WAKE_DROPPED
Find text:
key 229 MENU WAKE_DROPPED
and change to (just comment it with #):
#key 229 MENU WAKE_DROPPED
Save and reboot.
Now Menu button isn't active and Search button works as a Menu button.
No annoying random popping keyboard anymore.
Click to expand...
Click to collapse
Nice solution. When in warranty i'll choose to fix it by replacing those parts. But when out of warranty this is one to remember!
[HELP] Home button not working on MIUI life 2.4.20 v4 (ST17i)
Hi!
Today I've flashed MIUI life 2.4.20 v4 on my Xperia Active (ST17i) but home button is not working.
Tried reflashing, clearing cache & data, but there's some problem with the Android Configuration Assistant because it locks home button.
SOLUTION: (almost noob level)
AverageFury said:
[HELP] Home button not working on MIUI life 2.4.20 v4 (ST17i)
Hi!
Today I've flashed MIUI life 2.4.20 v4 on my Xperia Active (ST17i) but home button is not working.
Tried reflashing, clearing cache & data, but there's some problem with the Android Configuration Assistant because it locks home button.
Click to expand...
Click to collapse
1. Install a Root Explorer/Browser with which you can view and edit system files.
2. Navigate to:
system>usr>keylayout, and look for a file named as " cyttsp_key.kl "
3. Open it with a root text editor
(you need an editor with root permission for editing system files, mostly they come equipped along with the root browser)
4. Here you will find the list Capacitive touch buttons along with their functions listed
eg: for xperia active with 3 Capacitive touch buttons Back, Home, Menu it is something like this:
key 102 HOME VIRTUAL
key 139 MENU VIRTUAL
key 158 BACK VIRTUAL
5. So if your Home button is not working, you will notice the first line(key 102 HOME VIRTUAL) in missing. (102 is the button code, HOME is the function, & VIRTUAL I guess represents its a Touch Button)
6. Just add the line save the file & Restart your device, this should probably fix your problem.
Note:
1. The number the in each line after the "key" is a unique code for each button of your device, just google it to find the code & function of a particular button
2. If 1 of your hardware buttons are not working then repeat the same process with the file " pm8058-keypad.kl " in the same directory(system>usr>keylayout)
3. Make a backup of the file before you edit it.
4. You can disable a button by adding a "#" in front of the line that mentions its name/code.
eg: Change "key 139 MENU VIRTUAL" to "#key 139 MENU VIRTUAL"
So far I can't post PM or message to developement board as new registered user, lets try to get answer to my problem this way
Problem and following ROM is related to Xperia GO
I downloaded, installed and started use ExtremeSecurity Stock Jelly Bean 6.2.A.1.100 European ROM http://forum.xda-developers.com/showthread.php?t=2328171. I did it as I need something to replace stock one with delays it have. I found one problem, I am unable to solve. After install and rooting I found I can't use the home key (the touch sense key under display - the one with "house"). I was trying to google and change mapping of this key and did not succeed. So I made some tests and did not move anywhere forward...
1) If I go to recovery, cwm allow me to display key numbers in some menu. Here key respond well it code as 102 (as it should)
2) If I add line like key 102 HOME WAKE to any file in /system/usr/keylayout nothing change (after editing I reboot, then put it back, so far I was not succesfull)
3) If I use any of "keypress test application" (try 3 of them) they report all keys well (back, settings, vol up/dwn power) but no report and no action for home.
There is no difference in press or long press of key. Simply no action follows.
Do you have any Idea what can be wrong?
Thanks a lot
Karel
P.S. If admins will forward it as message to munjeni or move to Developement part of forum for this ROM, please delete it here...