I buy this phone, and when i put a sim it's say no GSM when i power phone, how can i fix this? i try to flash radio and it's not work it's stop flash... i try this on sdcard or with pc, how can i flash this radio force or whats ever. thanks.
by.adrian said:
I buy this phone, and when i put a sim it's say no GSM when i power phone, how can i fix this? i try to flash radio and it's not work it's stop flash... i try this on sdcard or with pc, how can i flash this radio force or whats ever. thanks.
Click to expand...
Click to collapse
that the process radio flash running perfectly, the first step you have to remove the SIM card from the phone and take-out device into Bootloader mode by pressing down mode both the POWER button and SIDE OK together and using the stylus at the same time to press the RESET button at the bottom. connect usb cable to the device and run radio rom flash by clicking MaUpgradeUt_noID.exe
Hakim Rahman said:
that the process radio flash running perfectly, the first step you have to remove the SIM card from the phone and take-out device into Bootloader mode by pressing down mode both the POWER button and SIDE OK together and using the stylus at the same time to press the RESET button at the bottom. connect usb cable to the device and run radio rom flash by clicking MaUpgradeUt_noID.exe
Click to expand...
Click to collapse
It's dosent work for me, because this app it's dosent found my phone, i mean sync not found in bootmod... how can i make this work, i found in device manager it's found htc_sync i guess. can u give me a good radio rom flash? i try to flash radio on sdcard with bootloader and when flash radio it's stop i don't know way...
by.adrian said:
It's dosent work for me, because this app it's dosent found my phone, i mean sync not found in bootmod... how can i make this work, i found in device manager it's found htc_sync i guess. can u give me a good radio rom flash? i try to flash radio on sdcard with bootloader and when flash radio it's stop i don't know way...
Click to expand...
Click to collapse
all radio rom is good if it fits with the service providers of the country concerned, for Htc Hermes radio rom can you find at ftp://ftp.xda-developers.com/Uploads/Hermes/ or at http://www.mediafire.com/?1ur3alrddj95u
if you want to try to flash via SD card, my advice! you should follow the Tutorial at http://forum.xda-developers.com/wiki/Hermes_SDCardFlashing
good luck by.adrian
Related
I have just tried flashing WM6 on to a Friends QTEK 8500, it went wrong Doh!!!.
I had already last Friday put on it the version with non wroking GPRS and this went without issue. I then reflashed my own one with a GRPS working version (went without a problem) and then tried his. I can get it into the boot loader screen but nothing else. I have tried SD card flashing (3 cards) 1x 512MB Card and 2 x 2GB card all formatted as FAT32 with file on the root the phone searches for it but doesnt find it.
Please any advise.
vallancen said:
I have just tried flashing WM6 on to a Friends QTEK 8500, it went wrong Doh!!!.
I had already last Friday put on it the version with non wroking GPRS and this went without issue. I then reflashed my own one with a GRPS working version (went without a problem) and then tried his. I can get it into the boot loader screen but nothing else. I have tried SD card flashing (3 cards) 1x 512MB Card and 2 x 2GB card all formatted as FAT32 with file on the root the phone searches for it but doesnt find it.
Please any advise.
Click to expand...
Click to collapse
First of all, REMEMBER, your phone is NOT bricked until it goes to BOOTLOADER mode.
Have you made SuperCID before flashing? What firmware are you trying to flash via bootloader mode?
Erofich said:
First of all, REMEMBER, your phone is NOT bricked until it goes to BOOTLOADER mode.
Have you made SuperCID before flashing? What firmware are you trying to flash via bootloader mode?
Click to expand...
Click to collapse
When you say booloader mode what does that look like. At the moment if I reboot the phone I get the HTC Mobility windows by Erofich screen.
When you hold down camera and record button and then power on the device I get brifely the white scrren looking for SD card it then goes to the tri-colour screen and does nothing.
I beleive I have CID it as I did the same on this as I did on mine i.e. ran the unlock according to the sticky.
I than put on this
Windows Mobile 6 AKU 0.5.0 (5.2.1711 Build 18165.0.5.0) WWE v5c
Yours i beleive (excellent work by the way)
and it all worked fine bar GPRS I relay needed GPRS so I used
http://forum.xda-developers.com/showthread.php?t=368715
using the clean one which updated fine on my phone but when i tried it on my friends it fell over at about 83% I followed the recovery intructions but this did not work.
When you get into bootloader screen by pressing RECORD and CAMERA buttons, then you MUST flash back to the STOCK ROM first. You can't flash any custom WM6 at this point. Only AFTER you have the stock ROM flashed, you can use SDA_ApplicationUnlock.exe to app unlock the phone, and copy the SoftSPL into the phone. Then run SPL.lnk.
To summarize: The built-in bootloader CANNOT flash WM6 and can ONLY flash a stock ROM. Once you go back to stock, you can then try to flash WM6 again. Anytime a flash fails, you must go back to stock first, then try again.
GnatGoSplat said:
When you get into bootloader screen by pressing RECORD and CAMERA buttons, then you MUST flash back to the STOCK ROM first. You can't flash any custom WM6 at this point. Only AFTER you have the stock ROM flashed, you can use SDA_ApplicationUnlock.exe to app unlock the phone, and copy the SoftSPL into the phone. Then run SPL.lnk.
To summarize: The built-in bootloader CANNOT flash WM6 and can ONLY flash a stock ROM. Once you go back to stock, you can then try to flash WM6 again. Anytime a flash fails, you must go back to stock first, then try again.
Click to expand...
Click to collapse
I am trying RUU_STAR100_3.6.251.0_02.67.30_QtekEUR_Ship I believe this is an original version 5 rom?
GnatGoSplat said:
you can use SDA_ApplicationUnlock.exe to app unlock the phone
Click to expand...
Click to collapse
This method works on Cingular ROM only, not Qtek.
vallancen
Hold CAMERA and RECORD button and press power button. When it goes to Bootloader tricolor mode connect your device to PC and run official Qtek 8500 RUU. Then make a reg (app) unlock:
Download regeditSTG2 which is digitally signed: http://4pda.ru/forum/attach/387522/regeditSTG2.zip
Then install it and change some registry values:
HKEY_LOCAL_MACHINE\Security\Policies\Policies\00001001 = 2
-> change to 1
HKEY_LOCAL_MACHINE\Security\Policies\Policies\00001005 = 16
-> change to 40
HKEY_LOCAL_MACHINE\Security\Policies\Policies\00001017 = 128
-> change to 144
HKEY_LOCAL_MACHINE \Security\Policies\Policies
-> create new key "0000101a": Dword = 1
HKEY_LOCAL_MACHINE \Security\Policies\Policies
-> create new key "0000101b": Dword = 1"
Click to expand...
Click to collapse
copy SoftSPL to the root of your device and run SPL.lnk
Then run WM6 RUU
Erofich said:
This method works on Cingular ROM only, not Qtek.
vallancen
Hold CAMERA and RECORD button and press power button. When it goes to Bootloader tricolor mode connect your device to PC and run official Qtek 8500 RUU. Then make a reg (app) unlock:
copy SoftSPL to the root of your device and run SPL.lnk
Then run WM6 RUU
Click to expand...
Click to collapse
When I plug into PC (XP SP2) and run the Qtek 8500 RUU it just times out and says it cant find device.
vallancen said:
When I plug into PC (XP SP2) and run the Qtek 8500 RUU it just times out and says it cant find device.
Click to expand...
Click to collapse
I have two phones one did work and one did not the one that worked shows version 1.02 on the tri colour screen the one I am having problems with shows 3.06 not sure if this is relevant.
Try removing the battery for about 30-seconds (or just removing the battery cover) and then put it back on. With the phone OFF, hold RECORD and CAMERA and plug in the USB while holding those buttons. It should go to the Bootloader. Run the QTEK RUU immediately after doing that.
If you sit at bootloader very long (more than a minute or so), for some reason it times out and the RUU won't work. It could be that's what's happening.
GnatGoSplat said:
Try removing the battery for about 30-seconds (or just removing the battery cover) and then put it back on. With the phone OFF, hold RECORD and CAMERA and plug in the USB while holding those buttons. It should go to the Bootloader. Run the QTEK RUU immediately after doing that.
If you sit at bootloader very long (more than a minute or so), for some reason it times out and the RUU won't work. It could be that's what's happening.
Click to expand...
Click to collapse
Tried that a couple of times just to make sure I was doing it correctly it goes into the tri colour screen I pressed the reflash option on the PC 1 second later this then sits there for a minute or so and times out "ERROR [260]" the phone did come on and has a USB in the bottom left corner so I presume the connection to the PC is OK.
I have just re-done mine again using the NEO rom (very nice) to make sure I am not going mad and that I did it correctly and this all went without a hitch.
Is there anyway I can get the phone to boot of a SPL on an SD Card I think if I could do this then I could get it back to 5 and start again.
No, it will only boot off the built-in SPL in ROM.
Did you try using the OEM .nbh file, naming it STARIMG.nbh and putting it on the SD card?
GnatGoSplat said:
No, it will only boot off the built-in SPL in ROM.
Did you try using the OEM .nbh file, naming it STARIMG.nbh and putting it on the SD card?
Click to expand...
Click to collapse
Yes tried that made sure formatted FAT32 etc. I know the SD card is ok because if I take my working phone and run the SPL link with the card in my good phone it finds the file and asks me if i want to reflash it. The non working phone with SPL3.06 does not do this.
You are not alone.
The bad news - the person in the post ended up having to exchange the phone.
It could be there's a bug in 3.06 SPL? Seems to be the case because I've flashed bad ROMs many dozens of times on my Cingular 3125 StarTrek and not once did I have any trouble flashing OEM ROM back on it.
Can I write the flash at a lower level with any tools i.e. pdocwrite or seomthing like that?
I don't believe so. Those programs require an Activesync connection (copies files to the phone). You could try the MTTY method, but I don't know if that works on StarTrek. I think it's some kind of terminal access into the bootloader, but what I've said so far is the extent of my knowledge about it.
vallancen said:
I have two phones one did work and one did not the one that worked shows version 1.02 on the tri colour screen the one I am having problems with shows 3.06 not sure if this is relevant.
Click to expand...
Click to collapse
I have a similar problem on a 3125 and the phone reports V4.01. I acquired the phone in this condition, so don't know how that came to be. When I try to update via USB, it tells me I need a newer update tool (to match the 4.01, I assume). What error message are you getting when you try to update via USB?
I have been struggling to flash (again) the great pro V2 rom, but I always used my VMWare based XP windows version on my Vista laptop. Today I could use a genuine XP Laptop and I could make a connection and start the upgrade!
Sounds good? That's what I thought too, until the upgrade stopped at 70% (and I didn't touch anything), because of a connection error. I followed the text on my PC screen and I finally it started flashing again for a few seconds and then my startrek suddenly restarted, but it stops at the first splash screen! I tried to get my device back to bootloader mode (push 2 soft buttons and start), but no bootloader mode, only the 1st splash.
I solved the problem.
Thank you for this thread
I tried flashing a new ROM to my i-mate smartflip and thought I had killed it, but going back to the wm5 OEM as suggested on this thread worked and I still have my phone. Now, am I brave enough to try upgrading it to wm6.1 (or even 6.5) again... Once again, many thanks!
somebody can me give the oem rom because i am same problem too on the secreen 3.06 i cant flashing anytihing rom somebody must me help
So I'm a total n00b at unlocking phones but I was trying to unlock my alltel 6800 and after running the program and following the steps I'm stuck on the screen that is red/green/blue/white that shows the rom info and says USB at the bottom when plugged into the pc. I tried a hard boot/soft etc. and can't find a solution. Also activesync is not recoginizing it. Thanks much for any help.
i believe you have to flash it with a new rom/radio.
download the the newest radio. connect your phone via usb. your screen should be in the tricolor (2.40spl) at this point. run the radio flash.
Download a new rom. do the same as above.
to get to tricolor screen (hold power + camera + press soft reset)
Yeah i'm thinking I might have to load it from the SD card but I can't find my stinkin adapter so I can format the SD card. Activesync is not recognizing my phone at all.
=I'm stuck on the screen that is red/green/blue/white that shows the rom info and says USB at the bottom when plugged into the pc.
Click to expand...
Click to collapse
it IS recognizing the phone being plugged in if it says USB at the bottom, so just flash a new rom/radio and you should be good.
HOLD, Give a little more info please
wilmheath said:
Yeah i'm thinking I might have to load it from the SD card but I can't find my stinkin adapter so I can format the SD card. Activesync is not recognizing my phone at all.
Click to expand...
Click to collapse
OK, before it is bricked, tell us the numbers on the rainbow screen, then if it is 1.6 then run the 2.40 olipro, then new ROM, then radio. It is not broken yet, activesync does not like it when the unit is in bootloader mode so it will not show it, but the RUU will work if you just go forward with it and when done it will get you out of bootloader. If you get confused and lost then being an alltel unit you can put the 1.6 bootloader back on, run the stock RUU from utstar.com, bring it back stock and start again.
I got it fixed and installed the sprint firmware but silly me let it run through the setup and now it's trying to use the spring network. Sometimes I wish i could punch myself in the face..
Ok so i got no2chem up and running great but I still can't actually dial out. When i dial it says i'm not allowed to etc after a few rings. Is there some way to change back to the alltel network?
ok now i'm running titan 3.35 but can no longer get active sync which is required to relock the phone. I've tried everything but activesync does not want to work anymore. Any ideas?
ok now i'm running titan 3.35 but can no longer get active sync which is required to relock the phone. I've tried everything but activesync does not want to work anymore. Any ideas?
Click to expand...
Click to collapse
First of all, you don't relock your phone...you leave 2.4-olipro on it because it's required to boot your phone with this rom on it.
Second, go into activesync settings and make sure usb is enabled in the connections.
get back to Alltel,,,,
wilmheath said:
ok now i'm running titan 3.35 but can no longer get active sync which is required to relock the phone. I've tried everything but activesync does not want to work anymore. Any ideas?
Click to expand...
Click to collapse
You will need to load up the PRL and then do IOTA.
madman34 said:
You will need to load up the PRL and then do IOTA.
Click to expand...
Click to collapse
I'm sorry but i'm not familiar with those terms. I do have USB enabled on activesync though but it never detects it.
From reading other threads I assumed I had to relock it, then reload the alltel rom to get the radio working again. Is there another way?
I got the factory alltel rom back in and working but it's not letting me make calls still. Any ideas on how to fix this?
Well i got my phone working finally but now the data line is not working. It says I need a password now which I haven't needed before.
Forgive me if this is discussed somewhere - searched and did not see it.
I have two moguls that I am trying to flash to cricket (with Ryan Moguls ROM).
Currently, they both have the following:
Bootloader: SPL-1.07
Radio: 1.69
I am needing to upgrade the radio to 3.xx first, I have tried to upgrade w/ SD, but gets stuck at the Loading screen.
What am I missing? Do I need to do another step prior to upgrading the radio?
Thanks for any help!
First you need to unlock the bootloader (olipro 2.40). Then you can flash any GPS radio or ROM.
Boot your device up unplugged and then connect it to the computer and make sure active sync is connected before flashing the bootloader. Now run the Olipro 2.40 unlocked Bootloader and follow its instructions until it comes up saying you must unplug and plug the phone back in. PLEASE dont miss that, DO NOT hit a key to continue UNTIL you have UNPLUGGED the phone waited a moment, then plugged it back in. Then you can hit a key and continue but PAUSE again and minimize that window. Now right click the Active sync icon on your PC's taskbar. Pick connection settings and then look for the Box with Allow USB connections. Clear the box (disable) the usb connections. Then click OK. Now open the window back up and click to continue. That will exit the Bootloader and reset the phone. Now right away UNPLUG the phone and Manually place it in Bootloader Manually. Now PLUG the phone back into the PC.
RyanMogul6800 said:
First you need to unlock the bootloader (olipro 2.40). Then you can flash any GPS radio or ROM.
Boot your device up unplugged and then connect it to the computer and make sure active sync is connected before flashing the bootloader. Now run the Olipro 2.40 unlocked Bootloader and follow its instructions until it comes up saying you must unplug and plug the phone back in. PLEASE dont miss that, DO NOT hit a key to continue UNTIL you have UNPLUGGED the phone waited a moment, then plugged it back in. Then you can hit a key and continue but PAUSE again and minimize that window. Now right click the Active sync icon on your PC's taskbar. Pick connection settings and then look for the Box with Allow USB connections. Clear the box (disable) the usb connections. Then click OK. Now open the window back up and click to continue. That will exit the Bootloader and reset the phone. Now right away UNPLUG the phone and Manually place it in Bootloader Manually. Now PLUG the phone back into the PC.
Click to expand...
Click to collapse
Excellent - thanks Ryan! BTW, amazing ROM, It works great!
I also have another mogul w/ the 1.20 Oli BL. Will this process work for that also?
Thanks!
arshull said:
Excellent - thanks Ryan! BTW, amazing ROM, It works great!
I also have another mogul w/ the 1.20 Oli BL. Will this process work for that also?
Thanks!
Click to expand...
Click to collapse
Edit: Here is what I do with a Stock phone. If its NON GPS Stock I usually connect to active sync and first flash a Newer Stock GPS ROM which includes a GPS radio. Then I find out the SPC code (getspc or bafmsl depending if ROM has net framework or not) as the stock ROM usually changes that. Then I change my SPC code to all zeros. Then I flash the Olipro 2.40. That way it boots up the Stock GPS ROM. Then I flash my Custom ROM followed by flashing a newer GPS radio using SD card method.
If its a Stock GPS ROM then I find out the SPC code (getspc or bafmsl depending if ROM has net framework or not) as the stock ROM usually changes that. Then I change my SPC code to all zeros. Then I flash the Olipro 2.40. That way it boots up the Stock GPS ROM. Then I flash my Custom ROM followed by flashing a newer GPS radio using SD card method.
Actually I spoke to quick - phone will not boot now after unlocking and loading the radio - Radio installed fully, but now it is stuck at the initial screen. Did I do something wrong?
I would like to get back my Stock ROM Win 6.5 from NAND Android. I have HTC HD2 T-Mobile, Is it possible to download RUU from T-Mobile Site, my Question is shall we need to unlock again after installing this ROM , pls help me
No if you have sim unlocked your HD2 to be able to use with other carriers. Then no ROM you flash will ever relock your HD2. And yes just download the official ugrade ROM from T-mobile.com. Put your HD2 into bootloader by holding down the volume down botton wben you turn your HD2 on. Connect it to computer via USB cable anx wait to see USB in the white bar of bootloader and your computer to rcognize your HD2 then right click on the update utility and click run as adminastrator.
Or you can go here to learn how to flash it via SD card.
T-Macgnolia said:
No if you have sim unlocked your HD2 to be able to use with other carriers. Then no ROM you flash will ever relock your HD2. And yes just download the official ugrade ROM from T-mobile.com. Put your HD2 into bootloader by holding down the volume down botton wben you turn your HD2 on. Connect it to computer via USB cable anx wait to see USB in the white bar of bootloader and your computer to rcognize your HD2 then right click on the update utility and click run as adminastrator.
Or you can go here to learn how to flash it via SD card.
Click to expand...
Click to collapse
Thanks for reply, i will try it 2moro and hope it will work.. thank u again
T-Macgnolia said:
No if you have sim unlocked your HD2 to be able to use with other carriers. Then no ROM you flash will ever relock your HD2. And yes just download the official ugrade ROM from T-mobile.com. Put your HD2 into bootloader by holding down the volume down botton wben you turn your HD2 on. Connect it to computer via USB cable anx wait to see USB in the white bar of bootloader and your computer to rcognize your HD2 then right click on the update utility and click run as adminastrator.
Or you can go here to learn how to flash it via SD card.
Click to expand...
Click to collapse
I am about to get a replacement HD2 as mine is beginning to freeze up a lot. Once i install the official ROM from TMOUSA, will this erase HSPL or whatever it is that would normally void my warranty? Thanks in advance.
lhernana2j said:
I am about to get a replacement HD2 as mine is beginning to freeze up a lot. Once i install the official ROM from TMOUSA, will this erase HSPL or whatever it is that would normally void my warranty? Thanks in advance.
Click to expand...
Click to collapse
if you install from sd card -- yes, hspl is removed.
if you install via usb -- no, hspl is not removed. you will need to remove it by hspl4 (just do the reverse of putting hspl on your phone.)
always check bootloader after doing the above to be sure.
verify
jsmccabe78 said:
if you install from sd card -- yes, hspl is removed.
if you install via usb -- no, hspl is not removed. you will need to remove it by hspl4 (just do the reverse of putting hspl on your phone.)
always check bootloader after doing the above to be sure.
Click to expand...
Click to collapse
i can verify this works. after using the sd card method, with the version 'RUU_Leo_1_5_TMOUS_3.14.531.1_Radio_Signed_15.42.50.11U_2.15.50.14_2_Ship'...
im now back to the stock TMOUS rom, and when i hold down volume and the power button at startup it now says 'spl-2.10.0000'
so it does work. i had android on nand before, but had to do this so i can return it for freezing up as it's still under warranty.
Please help anyone. Now phone not works. back screen always! jus when i connect it to usb pc shows found new hardware Qualcomm CDMA Technologios MSM.
Sorry, pushed thanks button accidently
Well, are you able to enter bootloader? Push volume button down (when the phone switched off) and push switch on button (end call). See if you have hspl on three-colored screen, then connect phone to pc. If you see USB, then flash original Rom. Then you can flash any rom according to cooker instructions. But I would recommend to install HSPL.
This could happen if you flashed radio without having HSPL on.
Skyguar said:
Sorry, pushed thanks button accidently
Well, are you able to enter bootloader? Push volume button down (when the phone switched off) and push switch on button (end call). See if you have hspl on three-colored screen, then connect phone to pc. If you see USB, then flash original Rom. Then you can flash any rom according to cooker instructions. But I would recommend to install HSPL.
This could happen if you flashed radio without having HSPL on.
Click to expand...
Click to collapse
Now press who you want... NO three-colored screen. Only Qualcomm CDMA Technologies MSM in device manager. Yes i had HSPL.. Actually im in shock now my HD2 really no longer works can't believe it
try to remove the battery for 10 seconds and then put it back and try to enter bootloader.
Try many times if u do not get it first time.
Flash ur HD2 with the original ROM.
WBR
Siemens Lover
SiemensLover said:
try to remove the battery for 10 seconds and then put it back and try to enter bootloader.
Try many times if u do not get it first time.
Flash ur HD2 with the original ROM.
WBR
Siemens Lover
Click to expand...
Click to collapse
Try everything.. I thing jtag can help here ?
Is it a T-Mobile HD2? If yes, then you bricked it. .51 radios are strictly for non TMOUS HD2's
Have a look here maybe you can save it
http://forum.xda-developers.com/showthread.php?t=668347#6262090
stathis95194 said:
Have a look here maybe you can save it
http://forum.xda-developers.com/showthread.php?t=668347#6262090
Click to expand...
Click to collapse
relies on being able to get into bootloader, so cant help a radio brick.
@OP, you need JTAG or new mainboard or new phone.
stathis95194 said:
Is it a T-Mobile HD2? If yes, then you bricked it. .51 radios are strictly for non TMOUS HD2's
Have a look here maybe you can save it
http://forum.xda-developers.com/showthread.php?t=668347#6262090
Click to expand...
Click to collapse
Yes mine is HTC HD2 T-mobile from USA ..