Please help anyone. Now phone not works. back screen always! jus when i connect it to usb pc shows found new hardware Qualcomm CDMA Technologios MSM.
Sorry, pushed thanks button accidently
Well, are you able to enter bootloader? Push volume button down (when the phone switched off) and push switch on button (end call). See if you have hspl on three-colored screen, then connect phone to pc. If you see USB, then flash original Rom. Then you can flash any rom according to cooker instructions. But I would recommend to install HSPL.
This could happen if you flashed radio without having HSPL on.
Skyguar said:
Sorry, pushed thanks button accidently
Well, are you able to enter bootloader? Push volume button down (when the phone switched off) and push switch on button (end call). See if you have hspl on three-colored screen, then connect phone to pc. If you see USB, then flash original Rom. Then you can flash any rom according to cooker instructions. But I would recommend to install HSPL.
This could happen if you flashed radio without having HSPL on.
Click to expand...
Click to collapse
Now press who you want... NO three-colored screen. Only Qualcomm CDMA Technologies MSM in device manager. Yes i had HSPL.. Actually im in shock now my HD2 really no longer works can't believe it
try to remove the battery for 10 seconds and then put it back and try to enter bootloader.
Try many times if u do not get it first time.
Flash ur HD2 with the original ROM.
WBR
Siemens Lover
SiemensLover said:
try to remove the battery for 10 seconds and then put it back and try to enter bootloader.
Try many times if u do not get it first time.
Flash ur HD2 with the original ROM.
WBR
Siemens Lover
Click to expand...
Click to collapse
Try everything.. I thing jtag can help here ?
Is it a T-Mobile HD2? If yes, then you bricked it. .51 radios are strictly for non TMOUS HD2's
Have a look here maybe you can save it
http://forum.xda-developers.com/showthread.php?t=668347#6262090
stathis95194 said:
Have a look here maybe you can save it
http://forum.xda-developers.com/showthread.php?t=668347#6262090
Click to expand...
Click to collapse
relies on being able to get into bootloader, so cant help a radio brick.
@OP, you need JTAG or new mainboard or new phone.
stathis95194 said:
Is it a T-Mobile HD2? If yes, then you bricked it. .51 radios are strictly for non TMOUS HD2's
Have a look here maybe you can save it
http://forum.xda-developers.com/showthread.php?t=668347#6262090
Click to expand...
Click to collapse
Yes mine is HTC HD2 T-mobile from USA ..
Related
I was instaling NBD_v8.3_8MB trough shelltool on my MDA Vario then something happened and my PC restarted I whink it is because of the electicity .... so now when I restardet my phone it is stuck on the T-mobile screen Where it is writen.....
IPL 2.21.001
SPL 2.21.Olip
GSM 02.19.11
OS 6.6.6.666
Thanks in advance
First of all, its not bricked. Bricked = doesn't turn on, nothing, blank screen.
I've looked to your info, you already have HardSPL, so you can flash directly using any RUU, don't use shelltools!
Enter bootloader (hold camera+reset), open up the RUU of the ROM you want (make sure it doesn't have any IPL/SPL) and flash away
well I looked all day what to do and I can not find solution
I just can not understand how to flash the phone
I found one solution via some kind of Wizard_love, but again I do not know what to do
Please help i am haveing the same thing just did it today i have the Cingular 8125....i have held camera+reset and got into these Red,Green,Blue,white screen and it says IPL 2.25 and SPL 2.25 now when i run the ROMUpdateUtility_Wizard_NoID it does not work i have my usb pluged in and my phone says USB please help
Thank you
PS.
I am running Vista
IPL 2.25
SPL 2.25
GSM 02.25.11
OS.6.6.6.666
_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-
Ok i have try everything. I have tried the RUU from the HTC site and even everything else when it is searching for the PDA and crashes idk why. I turn on my phone holding the camera and i get to the Red,Green,Blue,White...Plug the USB in and the phone says USB but not my computer??? so i don't know what i need to do please HELP i just got the phone and read you can do all this stuff
1. Please use a PC with Windows XP
2. Download your original carrier ROM (i.e. Cinglular stock ROM) and flash back to original WM5
3. Install HardSPL or use SSPL
4. Flash to WM6
starkwong said:
1. Please use a PC with Windows XP
2. Download your original carrier ROM (i.e. Cinglular stock ROM) and flash back to original WM5
3. Install HardSPL or use SSPL
4. Flash to WM6
Click to expand...
Click to collapse
Were can i get HardSPL,SSPLand the flash back up?
all i have is the original rom
You guys wanna see bricked? I have a BRICKED! phone... My MDA was the unfortunate victim of a car accident. When my car went carreening off the road, my MDA went flying through the air and ended up on the floor of the car but not before hitting virtually every surface on the inside of the car.
Now my charge port is completely snapped off and my battery shorted out when I was trying to hold the charge port in place to charge it and fried the main board. DEAD. NO MORE.
THAT MY FRIENDS, IS BRICKED....
No worries though, I already ordered a TyTN II
Cool can you help?
Oh and i had the same problem with my mda and i got it replaced from tmobile. - the easiest way to reapair an MDA is getting it replaced ^^
offtopic
@dharvey4651
Why didn't you buckle up your phone?
Well i got mine up and running agian just used XP and install the RUU from HTC YES.......Now when i go to install WM6 when i press update were it should show me the Ver. of the one i am installing on my phone it does not say why please help and what do i need to install WM6 on my phone?
Just a quick question did you read the other threads there are already. They basicly explain everything clear and good
i have just still stuck on some stuff
dferreira said:
First of all, its not bricked. Bricked = doesn't turn on, nothing, blank screen.
I've looked to your info, you already have HardSPL, so you can flash directly using any RUU, don't use shelltools!
Enter bootloader (hold camera+reset), open up the RUU of the ROM you want (make sure it doesn't have any IPL/SPL) and flash away
Click to expand...
Click to collapse
jukata
first of all,as dferreira has assured u that ur device is not bricked,secondly ,you already have HardSPL,that means your device is unlocked,just follow his instructions,download any wm6 Rom and flash,it'll good to go,but if u still want to be sure,download WST Tool from the below given thread read carefully and apply the tool to verify the status of ur device,
http://forum.xda-developers.com/showthread.php?t=329170
u can flash NBD rom which u have or any other wm6 rom,goodluck
NVM i am on the Other Page! Thanks
Ok, i have read everywhere and can't help myself, so if someone would be kind enough to help it would be much appreciated
Ok, Used SoftSPL and tried flashing the ROM. It manages to get to 99% and then just goes RED. I have tried 3 different ROMS and same story it goes RED at 99%.
When i remove the battery, it goes to the RUU Red, Green and Blue screen. SPL version is 2.16.0001. Not Oli's new one.
What do i do from now?
kastro said:
Ok, i have read everywhere and can't help myself, so if someone would be kind enough to help it would be much appreciated
Ok, Used SoftSPL and tried flashing the ROM. It manages to get to 99% and then just goes RED. I have tried 3 different ROMS and same story it goes RED at 99%.
When i remove the battery, it goes to the RUU Red, Green and Blue screen. SPL version is 2.16.0001. Not Oli's new one.
What do i do from now?
Click to expand...
Click to collapse
Soft SPL only allows you ONE update, so phone is CID unlocked only when Soft SPL is loaded.
It's normal for the RUU to stick on 99 % for a couple of minutes, The whole update will take aprox 10 minutes.
You can try the hard SPL from there you are semi-permanently CID unlocked.
Good luck,
EquinoXe
I would like to get back my Stock ROM Win 6.5 from NAND Android. I have HTC HD2 T-Mobile, Is it possible to download RUU from T-Mobile Site, my Question is shall we need to unlock again after installing this ROM , pls help me
No if you have sim unlocked your HD2 to be able to use with other carriers. Then no ROM you flash will ever relock your HD2. And yes just download the official ugrade ROM from T-mobile.com. Put your HD2 into bootloader by holding down the volume down botton wben you turn your HD2 on. Connect it to computer via USB cable anx wait to see USB in the white bar of bootloader and your computer to rcognize your HD2 then right click on the update utility and click run as adminastrator.
Or you can go here to learn how to flash it via SD card.
T-Macgnolia said:
No if you have sim unlocked your HD2 to be able to use with other carriers. Then no ROM you flash will ever relock your HD2. And yes just download the official ugrade ROM from T-mobile.com. Put your HD2 into bootloader by holding down the volume down botton wben you turn your HD2 on. Connect it to computer via USB cable anx wait to see USB in the white bar of bootloader and your computer to rcognize your HD2 then right click on the update utility and click run as adminastrator.
Or you can go here to learn how to flash it via SD card.
Click to expand...
Click to collapse
Thanks for reply, i will try it 2moro and hope it will work.. thank u again
T-Macgnolia said:
No if you have sim unlocked your HD2 to be able to use with other carriers. Then no ROM you flash will ever relock your HD2. And yes just download the official ugrade ROM from T-mobile.com. Put your HD2 into bootloader by holding down the volume down botton wben you turn your HD2 on. Connect it to computer via USB cable anx wait to see USB in the white bar of bootloader and your computer to rcognize your HD2 then right click on the update utility and click run as adminastrator.
Or you can go here to learn how to flash it via SD card.
Click to expand...
Click to collapse
I am about to get a replacement HD2 as mine is beginning to freeze up a lot. Once i install the official ROM from TMOUSA, will this erase HSPL or whatever it is that would normally void my warranty? Thanks in advance.
lhernana2j said:
I am about to get a replacement HD2 as mine is beginning to freeze up a lot. Once i install the official ROM from TMOUSA, will this erase HSPL or whatever it is that would normally void my warranty? Thanks in advance.
Click to expand...
Click to collapse
if you install from sd card -- yes, hspl is removed.
if you install via usb -- no, hspl is not removed. you will need to remove it by hspl4 (just do the reverse of putting hspl on your phone.)
always check bootloader after doing the above to be sure.
verify
jsmccabe78 said:
if you install from sd card -- yes, hspl is removed.
if you install via usb -- no, hspl is not removed. you will need to remove it by hspl4 (just do the reverse of putting hspl on your phone.)
always check bootloader after doing the above to be sure.
Click to expand...
Click to collapse
i can verify this works. after using the sd card method, with the version 'RUU_Leo_1_5_TMOUS_3.14.531.1_Radio_Signed_15.42.50.11U_2.15.50.14_2_Ship'...
im now back to the stock TMOUS rom, and when i hold down volume and the power button at startup it now says 'spl-2.10.0000'
so it does work. i had android on nand before, but had to do this so i can return it for freezing up as it's still under warranty.
I updated my phone (HD2 T-mobile) via internet website and when I finished the updating process, the phone did not work at all.
I tried more than once to switch it on, but it didn't respond. I took the battery out and put it in again, but nothing happened.
When I connect the phone with the charger, the charger light doesn't become on.
It seems that the phone is dead!!!. What do you suggest to solve this problem? If you think it is a hardware problem, what is the name of this hardware
Tray update ROM again
It dose not Enter in bootload mode
How I can apdate rom from diffrent way
What rom did you flash? If it isn't a tmous rom then the phone is destroyed.
HD2-RUU_Leo_HTC_ARA_1.66.415.9_Radio_15.37.50.07U_2.10.50.08_2_Signed_LEO_Ship
This ROM's name
Please support us with a bit more of information.
You´ve got a T-Mobile device and flashed it with a different ROM for a HTC device without branding.
But what did you meant with "flash via Website"? How did you really flash (via Active Sync or via SD card)?
Did you install HSPL or at least SSPL first?
I Flash it via Active Sync
yes I Installed HSPL But sspl I didn't Install
Its dead,the radio in that rom has killed it.
Only options are JTAG or replace mainboard
Though it is strange that the filename says 2.10.50 for the radio version,since 1.66 roms usually come with ..51.. radios,which kill tmouses.
If it really is a ..50.. radio in a 1.66 rom then a tmous should boot but hang at splash, yet you say yours just won't start, so I suspect a typo in the filename. (Not your typo,I can see lots of references to that filename online.)
I am download this rom from HTC site
Mo7ammad_89 said:
I Flash it via Active Sync
yes I Installed HSPL But sspl I didn't Install
Click to expand...
Click to collapse
You said that you have a T-Mobile device, but you didn´t tell that it is the US version of it. Is it or do you have the European version?
If it is the USversion you really flashed the wrong Radio ROM.
For the European version it would be no problem
no My Mobile Is Us version
Mo7ammad_89 said:
no My Mobile Is Us version
Click to expand...
Click to collapse
So it seems you have bricked your device, I would recommend to bring it to a service point and hope that they do not notice what you have done.
Perhaps this thread is a last chance for you:
http://forum.xda-developers.com/showthread.php?t=668347
Good luck!
Thank You My friend But This chance Is Impossible becuse It's need to Enter bootload mode and I can't Enter It
check the pins where the battery connect they bend very easy so you dont get a connection the red light will come on when u charge and the phone wont boot! there are three pins make sure they are all makeing a connection! Its very common!
I am sorry but I don't understand you very well can you explain more please
Mo7ammad_89 said:
I am sorry but I don't understand you very well can you explain more please
Click to expand...
Click to collapse
In other words:
Take out your battery and check the contacts between battery and the deviceframe. Is any of them bent?
No It's Not Any Of Them bent I think
but why you ask About It
AM I can repair My Mobile by them
And If you can explain for me by picture I well be glad
Mo7ammad_89 said:
No It's Not Any Of Them bent I think
but why you ask About It
AM I can repair My Mobile by them
And If you can explain for me by picture I well be glad
Click to expand...
Click to collapse
Sorry, it was not my idea but from b3ltazar. His thought was that your device might get no power to work.
I recommend once again to bring your device to a htc service center in order to repair it. In my mind you seem to have an hardware issue
I buy this phone, and when i put a sim it's say no GSM when i power phone, how can i fix this? i try to flash radio and it's not work it's stop flash... i try this on sdcard or with pc, how can i flash this radio force or whats ever. thanks.
by.adrian said:
I buy this phone, and when i put a sim it's say no GSM when i power phone, how can i fix this? i try to flash radio and it's not work it's stop flash... i try this on sdcard or with pc, how can i flash this radio force or whats ever. thanks.
Click to expand...
Click to collapse
that the process radio flash running perfectly, the first step you have to remove the SIM card from the phone and take-out device into Bootloader mode by pressing down mode both the POWER button and SIDE OK together and using the stylus at the same time to press the RESET button at the bottom. connect usb cable to the device and run radio rom flash by clicking MaUpgradeUt_noID.exe
Hakim Rahman said:
that the process radio flash running perfectly, the first step you have to remove the SIM card from the phone and take-out device into Bootloader mode by pressing down mode both the POWER button and SIDE OK together and using the stylus at the same time to press the RESET button at the bottom. connect usb cable to the device and run radio rom flash by clicking MaUpgradeUt_noID.exe
Click to expand...
Click to collapse
It's dosent work for me, because this app it's dosent found my phone, i mean sync not found in bootmod... how can i make this work, i found in device manager it's found htc_sync i guess. can u give me a good radio rom flash? i try to flash radio on sdcard with bootloader and when flash radio it's stop i don't know way...
by.adrian said:
It's dosent work for me, because this app it's dosent found my phone, i mean sync not found in bootmod... how can i make this work, i found in device manager it's found htc_sync i guess. can u give me a good radio rom flash? i try to flash radio on sdcard with bootloader and when flash radio it's stop i don't know way...
Click to expand...
Click to collapse
all radio rom is good if it fits with the service providers of the country concerned, for Htc Hermes radio rom can you find at ftp://ftp.xda-developers.com/Uploads/Hermes/ or at http://www.mediafire.com/?1ur3alrddj95u
if you want to try to flash via SD card, my advice! you should follow the Tutorial at http://forum.xda-developers.com/wiki/Hermes_SDCardFlashing
good luck by.adrian
hello,
i have an htc titan bought few months ago. i'm happy because it was unlocked and use a custom rom.
on the last 2 weeks i've noticed a very bad reception on gsm and therefore decided today to change the rom and radio. but no luck at all!
can enter on spl (it shows me hspl 2.5, radio 1750), but from here i can't do anything.
tried also pressing vol- and power, but after few seconds enter on a black screen with a computer, a phone with a cable and an arrow showing to
enter the cable in computer; nothing happens here also.
how can i change the rom and why the phone looks like that?
nobody?????
You have Radio 1750 and what rom you trying?
i have 1750 radio and i'm trying dynamics 2.2 both 2.05 and 4.06, western and eastern.
klinutzu said:
i have 1750 radio and i'm trying dynamics 2.2 both 2.05 and 4.06, western and eastern.
Click to expand...
Click to collapse
In case of radio 17 you should only try 4.06. Or downgrade the radio to 16 to try 2.05. Otherwise you get non-bootable device.
klinutzu said:
can enter on spl (it shows me hspl 2.5, radio 1750), but from here i can't do anything.
Click to expand...
Click to collapse
Enter HSPL screen, connect USB cable. When you see USB in the bottom of a screen - start TitanAdvancedRUU.exe
(before that - put TitanAdvancedRUU.exe and 4.06 rom file in one folder on your PC)
... can't install qualcomm driver...
l.e.: finally succeeded
somebody told me that if worst reception to install 2.05
klinutzu said:
somebody told me that if worst reception to install 2.05
Click to expand...
Click to collapse
Depends upon your carrier. Both Titan radios work $hitty. You should try both to realize which one is less crappy for you.
found what's happen: they are some small contacts on the mainboard thata don't touch well the back cover and therefore the phone seems to work without antenna...