is there any option to raise SGS3 CPU to 2000mhz or something like that?
EDIT: NEW AS 14/7
kk so i guess the highest and most stablest cpu might be till 1800mhz
1and what about ram? there is any overclocking for ram memory? (couldnt find anything about it)
2what about GPU?
not yet, i think the highest clock right now is 1.5 for the sgs3
and RAM, NO you can not get MORE ram, you can eliminate apps that eating up ram to free some up but no way to get more ram.
is there any need to overclock this beast lol its fast enough
the2rrell said:
not yet, i think the highest clock right now is 1.5 for the sgs3
and RAM, NO you can not get MORE ram, you can eliminate apps that eating up ram to free some up but no way to get more ram.
Click to expand...
Click to collapse
He wasn't referring to getting more RAM though was he? It read to me that he wanted to see if was possible to increase the clock speed of the RAM along with the CPU.
yep just wondering if there is any option for that as in SGS1+2
do you guys think when there is OC for s3, it will raise CPU to 2000MHz ?
darixtorento said:
yep just wondering if there is any option for that as in SGS1+2
do you guys think when there is OC for s3, it will raise CPU to 2000MHz ?
Click to expand...
Click to collapse
Already there OC/UV running 1500Mhz right now. Max 1800Mhz.
Look into de developers topics for the kernel..
Ive looked there.. stiil misunderstand something-
there is any OC of 2000mhz now?
Note that the Exynos 4Core CPU is still not very well understood and may well get long-time damage when ramping up the clock speed aggressively.
Is there actually ANY need for going so high except to show off?
You'll be measuring any speed improvement in loading things up in microseconds because people say Samsung still hasn't fully optimised the phone to the OS yet, so I think it's a bit pointless stressing the phone that much.
1.8GHZ is currently the max however with kmemhelper you should be able to change the last frequency to 2.0...
Hell I'll even find out the script for you if you are mad enough to try it first
Sent from my GT-I9300 using xda premium
I doubt you'll get it 2GHz stable anyway. From what I've heard most people have theirs crap out at 1.8GHz.
kk so i guess the highest and most stablest cpu might be till 1800mhz
1and what about ram? there is any overclocking for ram memory? (couldnt find anything about it)
2what about GPU?
to make it clear:
i wanna know which ram overclocking is available to do on the SGS3 as long as the device still stables.
same with GPU and all those stuff.. there is a really good lvl of OC like in S1 S2?
still waiting for help
I would go for Siyah kernel and try 1.8 GHz then under volt using voltage control or extweaks app. Most phones can go 100 mv on all steps except maybe the very highest clocks.
gpu overclock is not possible yet
Sent from my GT-I9300 using xda premium
OC of the ram is connected to bus speed and this is very different to the fixed bus in the sgs1 so nothing like live oc is possible. Still 400 mhz bus speed is 4 times faster than the CHAt!
Sent from my GT-I9300 using xda premium
I`am running RGUI v7 rom and siyah kernel 1.3.8a. My clockspeed is 1600 Mhz and is rockstable, snappy and battery life is great.
I don`t go any higher for daily use, it doesn`t make much difference in speed and i think it cuts down your cpu-life.
ho so no LIVE OC is available now? (like in S1 and s2)?
well hoping it will be possible to add those functions(live oc, ram, cpu, and more..) in Android JB 4.1
My Captivate (SGS1) can hit 1.92GHz... So I think that a CPU with a stock clock of 1.4GHz can hit 2GHz easily. We will just have to see. I am not pushing this phone though. I don't have $700 to replace it.
well hoping it will be possible to add those functions(live oc, ram, cpu, and more..) in Android JB 4.1
Click to expand...
Click to collapse
That's not depended on the ROM but on whether the hardware allows to modify the values and if kernel developers figure out how to do it.
Related
I tried asking this in the Megatron-thread but as usual, no answers...
I am a little worried about keeping my phone overclocked at all times, so I was thinking about downloading SetCPU and switching between 600 and 700 via that app. But my question is this: Megatron ROM overclocks the phone by default. If I download a 3rd-party app to overclock/underclock the phone, will this mess up the whole system?
Anyone? Would really appreciate help!
i've been using megatron & setcpu together for the past month.. no issues yet, so cant promise ma phone wont go up in flames i clock extra if needed
Ok, thanks!
My Experience: USing LOL rom with default OC gave me kernel panics ...so instead i disabled OC in ROm and wud then OC using SetCPu...ALso I dont know why but touch feels a lot more smoother on LOL rom with the lag fix than megatron....so i switched from megatron to LOL...Currently even with maxCPu 480Mhz and conservative profile..touch is very smooth on LOL
sarfaraz1989 said:
My Experience: USing LOL rom with default OC gave me kernel panics ...so instead i disabled OC in ROm and wud then OC using SetCPu...ALso I dont know why but touch feels a lot more smoother on LOL rom with the lag fix than megatron....so i switched from megatron to LOL...Currently even with maxCPu 480Mhz and conservative profile..touch is very smooth on LOL
Click to expand...
Click to collapse
How do I disable the OC in Megatron? By adding the "minitron" file and then using SetCPU?
Hi all,
I'm a newbie in Android world. Successfully flashed my O1 to Megatron v1. Afterwhich I tried installing SetCPU to it and overclock to 806mhz & above. However, after overclocking with SetCPU, the whole phone's performance became more sluggish than the original Megatron 729mhz...
Someone please advise me on how to overcome this and make the phone speedier with high frequency.
Is there a way to edit some of Megatron's kernel to make it 806mhz on default even without using SetCPU?
Don't use set on boot feature, it will make ur phone get stock on bootloop...
So can someone tell me how to proceed with this? I want to be able to change between 600 and 700, when I please. Thanks
ccdreadcc said:
Don't use set on boot feature, it will make ur phone get stock on bootloop...
Click to expand...
Click to collapse
Got it! Tried last night without set on boot feature. Working fine with 806mhz and speedier than 729mhz. However my chipset refuses to go into higher frequency without freezing and rebooting... Is it due to my microsd card? I'm still using the original 2gb microsd card tt came together with the O1... Will changing to a class 6 or higher microsd card let me clock higher? or my chipset is just lemon at 806mhz?
FnH84 said:
So can someone tell me how to proceed with this? I want to be able to change between 600 and 700, when I please. Thanks
Click to expand...
Click to collapse
FnH84: I downloaded SetCPU from XDA forum and can tweak the frequency between 600 & 700 by myself. Even can set profiles to govern the speed at different situations.
taeivon said:
However my chipset refuses to go into higher frequency without freezing and rebooting... Is it due to my microsd card?
Click to expand...
Click to collapse
You are already pushing the CPU to its limit with that 806 MHz frequency. Do you even realize is 34% above the designed specs for this CPU? You're already lucky enough you got it stable at 806, and no SD card will ever make a difference, they're not related.
How come Samsung Galaxy Mini running on the same chipset offer 800Mhz as stock???
Man, I don't know! How come the same "Pentium IV" processor could come in speeds from 1.3 GHz to 3.8 GHz?
Can any of you actually believe that LG would underclock an 800 MHz CPU and sell it to us as a 600 MHz instead of letting it run at its best?
Galaxy Mini is obviously using a CPU designed to run at 800 MHz, even though it bears the same name. And that one can probably be overclocked to above 1 GHz.
masteryx said:
You are already pushing the CPU to its limit with that 806 MHz frequency. Do you even realize is 34% above the designed specs for this CPU? You're already lucky enough you got it stable at 806, and no SD card will ever make a difference, they're not related.
Click to expand...
Click to collapse
Thanks for your reply. I was thinking bout the same as the other guy, that galaxy ace can run at 800mhz, and why not O1.
Hmm... Isn't there any other ways to push the frequency higher? Maybe supply more voltage to the core? I dont mind sacrificing batt life, I just wanna try ways to push it to the max~~
www.mobilecrunch.com/2011/06/01/qualcomm-adobe-optimize-flash-for-snapdragon-powered-android-phones/
Saw this article today that indicates qualcomm is working with adobe to bring flash to the msm7x27 chipset.
Awesome
Sent from my LG-P500 using XDA Premium App
Nice....
Sent from my LG-P500 using XDA Premium App
Pretty interesting news
but will the 800mhz thingy be the thing that limits us?
hon kin said:
but will the 800mhz thingy be the thing that limits us?
Click to expand...
Click to collapse
Overclocking may be a solution?
These are really great news. I hope we will get flash as soon as possible. Let's see how these things will go.
Sent from my LG-P500 using XDA Premium App
Sounds like it may be hardware accelerated. Hopefully it is because my nook with an a8 CPU at 1.2ghz has issues playing 480p flash videos without hardware acceleration. Would imagine my optimus overclocked at 806mhz would have issues with 360p flash videos without hardware acceleration.
Good news but how will we get 800mhz on O1???It should be possible bcoz if not how Sam Ace & Gio are running on that speed!!!
Jaani said:
Good news but how will we get 800mhz on O1???It should be possible bcoz if not how Sam Ace & Gio are running on that speed!!!
Click to expand...
Click to collapse
You probably will not. 768MHz is completely stable here though, anything above that => not good.
doktornotor said:
You probably will not. 768MHz is completely stable here though, anything above that => not good.
Click to expand...
Click to collapse
Well, sometime you can get 800MHz. But overclocking is strange device dependent. So, somebody have 768 very stable you, but somebody can have 800 and somebody have some problems also on 710 like me for example.
I believe the ARM1176 processor is designed to 800 MHz for my LG Optimus V.
Not sure that everyone else is running the same processor, but I think there are two speeds for the ARM v.6, all flavors, which is 800 MHz and 1GHz. The cell manufacturers lower the speed to conserve power and I'm certain buy the less expensive 800 MHz version.
So everyones CPU should be 800 MHz capable...that does not mean that the memory I/O can take a similar speed up - I don't know exactly what is being sped up with the CPU overclock, but the CPU itself shouldn't have any issues. If it is the system clock, then the I/O is already being timed appropriately and a speed up is overclock for it, but 800 MHz is not an overclock for the CPU.
Good news people let's wait and see...
Nice! I have been waiting for this from long time ago.
/W
GolfnWrx said:
I believe the ARM1176 processor is designed to 800 MHz for my LG Optimus V.
Not sure that everyone else is running the same processor, but I think there are two speeds for the ARM v.6, all flavors, which is 800 MHz and 1GHz. The cell manufacturers lower the speed to conserve power and I'm certain buy the less expensive 800 MHz version.
So everyones CPU should be 800 MHz capable...that does not mean that the memory I/O can take a similar speed up - I don't know exactly what is being sped up with the CPU overclock, but the CPU itself shouldn't have any issues. If it is the system clock, then the I/O is already being timed appropriately and a speed up is overclock for it, but 800 MHz is not an overclock for the CPU.
Click to expand...
Click to collapse
it is possible but for most peoples ROM anything past 787 will give a kernel error and reboot the phone the only ROMi got it to work on was Megatron ROM
Sent from my LG-P500 using XDA Premium App running miks CM7, quadrant 2100, over clocked at 787
On Spica Max Neocore output was 7 fps and on o1 its 63 fps currently.
Even than I could play games like ninjump and mx moto.
So what difference would be there in performance even if we can clock till 768-787 and not 806.
Will the flash not run because our clock speed is 787 and not 800?
I hope people are getting what I am asking. When our o1 can handle things like Neocore 63 fps, 1gb ext partition, multi format video playback, then why would it be difficult to run flash on 787 instead of 800 even when flash would be optimized for our kind of processors?
Sent from my LG-P500 using Tapatalk
Awesome news. Hope we get it soon.
More or less flash should work on or device even at 600mhz, the real issue is to optimize it for our chip set instructions.
GolfnWrx said:
I believe the ARM1176 processor is designed to 800 MHz for my LG Optimus V.
Not sure that everyone else is running the same processor, but I think there are two speeds for the ARM v.6, all flavors, which is 800 MHz and 1GHz. The cell manufacturers lower the speed to conserve power and I'm certain buy the less expensive 800 MHz version.
So everyones CPU should be 800 MHz capable...that does not mean that the memory I/O can take a similar speed up - I don't know exactly what is being sped up with the CPU overclock, but the CPU itself shouldn't have any issues. If it is the system clock, then the I/O is already being timed appropriately and a speed up is overclock for it, but 800 MHz is not an overclock for the CPU.
Click to expand...
Click to collapse
I hope so i wonder if our Froyo(O1lg) kernel source varies greatly with Ace's kernel code ...SoC chipset is the same msm7227 for other devices code wud vary but the vga and other arm(assembly) code must be the same..If any kernel developers cud please look into it
doktornotor said:
You probably will not. 768MHz is completely stable here though, anything above that => not good.
Click to expand...
Click to collapse
Exactly. And even if there was a way to run flash on O1, I wouldn't bother with it myself. It would only slow down the phone and kill the battery life in two seconds.. I really, really don't understand what the big deal about this is. Low-budget phone, no flash. End of discussion lol.
Hi im thinking of doing a overclock to 1.5 ghz is it safe for the processor and the battery life witch already sucks. has anyone on here whos done it using setcpu and the rom had any problems after doing so ? and how much faster is 1.5 ghz compared to 1.2 ghz on the galaxy s2 ? and is it safe in general for the hardware of the phone will the phone get hotter or have over heating problems ? also what should my settings be for minimum maximum and the voltages ?
Of course oc is going to make ur battery life a lot worse.
Sent from my Inspire 4G using xda premium
I haven' used Setcpu in a while but I believe it's got a feature to stress test the settings to see if it can handle it. Generally the worst that happens is it'll crash. So long as it doesn't get hot. Heat=death for electronics :')
I'm using tegrak (from market) to overclock to 1.4. I found 1.5 was too unstable. Noticeable difference between 1.2 & 1.4 is almost none. Also voltage increase of 50mv was needed to gain stability. There is not much point of overclocking the device IMO unless like me u just get some satisfaction out of knowing its running faster!
Sparksltd said:
I'm using tegrak (from market) to overclock to 1.4. I found 1.5 was too unstable. Noticeable difference between 1.2 & 1.4 is almost none. Also voltage increase of 50mv was needed to gain stability. There is not much point of overclocking the device IMO unless like me u just get some satisfaction out of knowing its running faster!
Click to expand...
Click to collapse
This is true. I see no difference between 1.2 & 1.5ghz. But that doesn't keep me from running it at 1.5 when I'm playing a game anyway :'D
Sent from my Inspire 4G using xda premium
GMoneyDTP said:
Hi im thinking of doing a overclock to 1.5 ghz is it safe for the processor and the battery life witch already sucks. has anyone on here whos done it using setcpu and the rom had any problems after doing so ? and how much faster is 1.5 ghz compared to 1.2 ghz on the galaxy s2 ? and is it safe in general for the hardware of the phone will the phone get hotter or have over heating problems ? also what should my settings be for minimum maximum and the voltages ?
Click to expand...
Click to collapse
Well it's not safe, that I can say. Nothing is safe when you don't know what other things are changing with the clock rate. But still you could do that. You just have to make sure that the temperature is within limit, it will be definitely high, but make sure it's not that high.
And upping the clock rate to 1.5 GHz won't drain any extra battery than 1.2 GHz.
Regards.
GMoneyDTP said:
Hi im thinking of doing a overclock to 1.5 ghz is it safe for the processor and the battery life witch already sucks. has anyone on here whos done it using setcpu and the rom had any problems after doing so ? and how much faster is 1.5 ghz compared to 1.2 ghz on the galaxy s2 ? and is it safe in general for the hardware of the phone will the phone get hotter or have over heating problems ? also what should my settings be for minimum maximum and the voltages ?
Click to expand...
Click to collapse
I tried the overclocking and each phone is different, increase then test, there are many benchmarking apps out there, I was stable at 1.4, my kernel does not include 1.5 GHz, and irregardless of what people may say, running the phone at higher clock speeds consistently DOES drain the battery more than 1.2GHz, unless you have found a way to manipulate the laws of physics. I don't see how one can fathom the thought that you can get a faster CPU at absolutely no cost.
Many people think when the CPU running faster means you complete tasks faster, hence 1.5 would complete a task faster than 1.2 and hence save battery, but I believe we use this phone as more than a calculator, so when you are performing a task that causes the CPU to run at 1.5 for a period of time e.g playing a game, browsing or whatever you do with your phone, then the CPU has to draw more power to keep the frequency at 1.5 as compared to the CPU running at 1.2
All in all, I dialed back because I was doing fine without it and I did not need it, other people may need it, and I wasn't gaining anything. to answer your question directly, it all depends on what you do with your phone, I'm not a huge gamer or anything and the 1.2GHz has proven to be more than enough for me to have a very pleasant experience using this device
Using it occasionally is safe, unless you stress your mobile at 1.5+ ghz for more than an hour or so.
The cpu governor will only make use of higher frequencies when there is a need, so mostly you will see your mobile idling at 200 mhz.
HTCinspiration said:
Of course oc is going to make ur battery life a lot worse.
Click to expand...
Click to collapse
Not necessarily a lot worse. It depends on how you are using your phone, and what is causing it to run fast. If overclocking allows the phone to spend longer in deep sleep state, your battery will win. If its games, and by OC you achieve a higher frame rate, then the phone is doing more work, and this will be reflected in the battery life going down.
Most of the time, screen on is going to dominate. If you are a low screen-on user, I guess there is more chance for a higher max_cpu to be beneficial (it won't be used unless there is a task that requires it). More accurately, it helps some of the time, so the net result is not always obvious to predict.
How about undervolting?
Any danger in doing so- other than crashing when voltage is too low?
Before over clocking it might be worth downloading cpuspy from the market and seeing what time you spend in each speed.
Chances are most of the time you won't even hit 1.2 so might not have anything to gain by over clocking.
Then again I dont know how you use your device but I do know I was surprised when I found out.
Sent from my GT-I9100 using XDA App
I've played with the SuperSonic version of this phone (which has a 1.5Ghz core) and the results from photos/video are much better, I'm pretty sure the cameras are exactly the same but the SuperSonic benefits from the higher CPU.
I think it would be cool if somebody could write an app that states
IF user opens Camera application voltage + clock speed is increased to allow stable 1.5GHz speed
WHEN user closes camera application overclock turns off.
Thoughts?
You have a smartphone! Not a pc!
I didnt see any advantage if you oc to 1.5
Btw In normal use your phone keep in 200mhz not 1.2.
I think i only hit 1.2 two or 3 times for 3 seconds in a full battery cycle.
Sent from my GT-I9100 using xda premium
oc dosnt make sense ,there no noticeable diff,an yes very few times i hit 1.2 mostly its on 800 or few times on 1000....using a device with 1.5ghz proccesor an oc a device to 1.5 ghz which has 1ghz processor is very diff in nature....
Fair enough.
Well I wouldn't mind an app that mazes out at 1.2GHz with camera app open, as it can lag when shooting HD.
oc upto 1.4 ghz is fair enough, anything more than that is a waste. though you cant find any visible difference between 1,1.2 and 1.4 it does helps in maintaining smoothness on some situations.
yes very true i had oc my sgs1 at 1.2ghz and sgs2 at 1.4ghz but frankly i dint see the diff so after few days use i turnd to orignal settings....but many use oc an phone works fine,but depends on personel use......an yes as bala_gammer says its fine on 1.4ghz......cheeeerz
is overclocking galaxy s2 to 1.3gh safe
HEY pople and friends i want to overclock my samsung galaxy s2 to 1.3gh soo is it safe ??????.
imad.d said:
HEY pople and friends i want to overclock my samsung galaxy s2 to 1.3gh soo is it safe ??????.
Click to expand...
Click to collapse
hey mate
u really think 100mhz would make that much change? its safe btw... seen people running s2 at clock speed higher than 1.3ghz
Plz help @..Longtime hd gaming(gta sa,nfs mw , asphalt,modern combat...) using 1.4 ghz is safe?
I also noted that gameloft games are makes more over heat for phone..
Which is the best and safe voltage level for 1.4 ghz 1250mv or 1275mv or 1300mv
Iam using siyah v6.0b5 kernel with wizzedkat 3.1..
Sent from my GT-I9100 using XDA Premium 4 mobile app
Well u do not see much difference on daily usage due to oc..but it does give a smoother experience while playing high quality games
Sent from my GT-I9100 using Tapatalk
i was messing aroud with voltage control and cpu spy and i noticed that the cpu speed was only topping out at like 1ghz these phones come with dual core 1.5 ghz correct? mine has never seen that high of a speed is there a reason or am i missing something? on my s2 it had a 1.2 dual core cpu i believe and it said how long each speed had seen action and i even bumped it up to like 1.4. im nervous to mess around with the speed if its already 1.5 i was just gonna set it to like 1.6 or something.but it seems mine is running each core at just 1ghz can anyone lend me some light on this.
You have Power Saving ON , that limits max cpu speed.
ahh thank you so much another question on spu spy it says unused cpu stats im guessing is 1.1 and 1.2 is there a reason they are unused? also just a guess but looks like i cant go any higher than 1.5 with voltage control? is there another app that lets me bump it up to like 1.6? or 1.7?
Don't worry about it , cpuspy doesn't have full history of your cpu activity, cpu clocks up and down depending on load.
CpuSpy is not very reliable from my experience.
You need to flash a different kernel that will allow you to over clock the cpu. Voltage control will allow you to do this but you need a kernel that will let you over clock first.
Sent from my SPH-L710 using xda app-developers app
ok thanks.
Hi! I have problem with perseus Kernel If I overclock cpu a little bit, All the same the problem (If I start play game some time it will restart), it does not matter how much overclocked. I tested 1.7Ghz clock and test it For 1375mv, 1400mv, 1425mv, and it's not effective and between a perseus rom freezes lock screen and I have to restart it :S, siyah kernel will not let me even overclock more than 1.5GHz can someone help me with this problem :laugh:, I love overclocking :silly:
SiyahKernel S3 v1.5 CPU over/underclock: 100-1800MHz 18-steps , GPU over/underclock: 54-800MHz ,Perfect to play , i have been using for a long time and i had never any problems ........
devid801 said:
SiyahKernel S3 v1.5 CPU over/underclock: 100-1800MHz 18-steps , GPU over/underclock: 54-800MHz ,Perfect to play , i have been using for a long time and i had never any problems ........
Click to expand...
Click to collapse
Okay But, why I'm not able to overclock 1.8GhZ its show me 200-1.5GhZ I tried overclock stweaks, cpu master, set cpu, and Foxhound extras but not help I try flash siyah again If that help.. Block story max settings eat really MUCH performance
I'm not even able hit over the 1.5GhZ and it show me 25-1.5GhZ (((
Anyone?
Anyone know what I do wrong if I'm not able hit 1.8GhZ?
yes,, your cpu isn't up to it, simple. With overclocking make small steps, note what you are doing, experiment with voltages, but all chips are different so experimentation is the only way, along with lots of reading and learning, skill aided by searching
slaphead20 said:
yes,, your cpu isn't up to it, simple. With overclocking make small steps, note what you are doing, experiment with voltages, but all chips are different so experimentation is the only way, along with lots of reading and learning, skill aided by searching
Click to expand...
Click to collapse
okay But why this perseus give me overclock more than 1.5GhZ But Perseus is so buggy :S and I can normally overclock Gpu with siyah kernel but If I run test I am not note difference, 1 better fps for 700MhZ GPU Clock My Phone is so strange
saletan said:
okay But why this perseus give me overclock more than 1.5GhZ But Perseus is so buggy :S and I can normally overclock Gpu with siyah kernel but If I run test I am not note difference, 1 better fps for 700MhZ GPU Clock My Phone is so strange
Click to expand...
Click to collapse
you have to understand the fact that the kernel is in alpha stage, so if you dont know what you are doing you shouldnt have flashed it. and also all chips are not capable of handling higher frequency, 1.6 ghz should be asafe bet for all processors..
700mhz in siyah makes a big impact depending on the benchmark you run.. check the thrread in my sig for more info.
Thanks all for posts! I figured it out, I give more juice for all these steps for perseus alpha And not anymore reboots. 1.8 GhZ 1450mv 1.7GhZ 1400mv, 1.6GhZ 1350mV, 1.5GhZ 1300mV, I run now 1.7GhZ for dual core mode, I'll try soon run my phone quad core mode . But I can't overclock my gpu with perseus and siyah rom doesn't give me overclock more than 1.5ghZ DD so strange Ps: 1.7 GhZ Dual core My Cpu score is 8123 and memory 5538 on quandrant benchmark.
Edit: If my phone a little bit overheat it reboot same thing is 1.6GhZ, 1.7GhZ, 1.8GhZ. 1.6GhZ I run stability test about 1-2min and it reboot, Battery About 41 degrees Celsius :S
Why in the name of all that is holy would you overclock your CPU, and then run it in dual core mode??
You would be better off leaving it at 1.4ghz in quad core mode.
That seems pointless.
Sent from my GT-I9300 using xda premium
I make video today
Sent from my GT-I9300 using xda app-developers app
http://www.youtube.com/watch?v=glPp2ORTvFo&feature=youtu.be Sorry for poor video my video editing software doesn't working But If I run test about 1 min device reboot My video will not be saved if it shuts down so I had to stop Stability Test before a turn off.
I will do later in the evening siyah kernel video for overclocking problem