Hi im thinking of doing a overclock to 1.5 ghz is it safe for the processor and the battery life witch already sucks. has anyone on here whos done it using setcpu and the rom had any problems after doing so ? and how much faster is 1.5 ghz compared to 1.2 ghz on the galaxy s2 ? and is it safe in general for the hardware of the phone will the phone get hotter or have over heating problems ? also what should my settings be for minimum maximum and the voltages ?
Of course oc is going to make ur battery life a lot worse.
Sent from my Inspire 4G using xda premium
I haven' used Setcpu in a while but I believe it's got a feature to stress test the settings to see if it can handle it. Generally the worst that happens is it'll crash. So long as it doesn't get hot. Heat=death for electronics :')
I'm using tegrak (from market) to overclock to 1.4. I found 1.5 was too unstable. Noticeable difference between 1.2 & 1.4 is almost none. Also voltage increase of 50mv was needed to gain stability. There is not much point of overclocking the device IMO unless like me u just get some satisfaction out of knowing its running faster!
Sparksltd said:
I'm using tegrak (from market) to overclock to 1.4. I found 1.5 was too unstable. Noticeable difference between 1.2 & 1.4 is almost none. Also voltage increase of 50mv was needed to gain stability. There is not much point of overclocking the device IMO unless like me u just get some satisfaction out of knowing its running faster!
Click to expand...
Click to collapse
This is true. I see no difference between 1.2 & 1.5ghz. But that doesn't keep me from running it at 1.5 when I'm playing a game anyway :'D
Sent from my Inspire 4G using xda premium
GMoneyDTP said:
Hi im thinking of doing a overclock to 1.5 ghz is it safe for the processor and the battery life witch already sucks. has anyone on here whos done it using setcpu and the rom had any problems after doing so ? and how much faster is 1.5 ghz compared to 1.2 ghz on the galaxy s2 ? and is it safe in general for the hardware of the phone will the phone get hotter or have over heating problems ? also what should my settings be for minimum maximum and the voltages ?
Click to expand...
Click to collapse
Well it's not safe, that I can say. Nothing is safe when you don't know what other things are changing with the clock rate. But still you could do that. You just have to make sure that the temperature is within limit, it will be definitely high, but make sure it's not that high.
And upping the clock rate to 1.5 GHz won't drain any extra battery than 1.2 GHz.
Regards.
GMoneyDTP said:
Hi im thinking of doing a overclock to 1.5 ghz is it safe for the processor and the battery life witch already sucks. has anyone on here whos done it using setcpu and the rom had any problems after doing so ? and how much faster is 1.5 ghz compared to 1.2 ghz on the galaxy s2 ? and is it safe in general for the hardware of the phone will the phone get hotter or have over heating problems ? also what should my settings be for minimum maximum and the voltages ?
Click to expand...
Click to collapse
I tried the overclocking and each phone is different, increase then test, there are many benchmarking apps out there, I was stable at 1.4, my kernel does not include 1.5 GHz, and irregardless of what people may say, running the phone at higher clock speeds consistently DOES drain the battery more than 1.2GHz, unless you have found a way to manipulate the laws of physics. I don't see how one can fathom the thought that you can get a faster CPU at absolutely no cost.
Many people think when the CPU running faster means you complete tasks faster, hence 1.5 would complete a task faster than 1.2 and hence save battery, but I believe we use this phone as more than a calculator, so when you are performing a task that causes the CPU to run at 1.5 for a period of time e.g playing a game, browsing or whatever you do with your phone, then the CPU has to draw more power to keep the frequency at 1.5 as compared to the CPU running at 1.2
All in all, I dialed back because I was doing fine without it and I did not need it, other people may need it, and I wasn't gaining anything. to answer your question directly, it all depends on what you do with your phone, I'm not a huge gamer or anything and the 1.2GHz has proven to be more than enough for me to have a very pleasant experience using this device
Using it occasionally is safe, unless you stress your mobile at 1.5+ ghz for more than an hour or so.
The cpu governor will only make use of higher frequencies when there is a need, so mostly you will see your mobile idling at 200 mhz.
HTCinspiration said:
Of course oc is going to make ur battery life a lot worse.
Click to expand...
Click to collapse
Not necessarily a lot worse. It depends on how you are using your phone, and what is causing it to run fast. If overclocking allows the phone to spend longer in deep sleep state, your battery will win. If its games, and by OC you achieve a higher frame rate, then the phone is doing more work, and this will be reflected in the battery life going down.
Most of the time, screen on is going to dominate. If you are a low screen-on user, I guess there is more chance for a higher max_cpu to be beneficial (it won't be used unless there is a task that requires it). More accurately, it helps some of the time, so the net result is not always obvious to predict.
How about undervolting?
Any danger in doing so- other than crashing when voltage is too low?
Before over clocking it might be worth downloading cpuspy from the market and seeing what time you spend in each speed.
Chances are most of the time you won't even hit 1.2 so might not have anything to gain by over clocking.
Then again I dont know how you use your device but I do know I was surprised when I found out.
Sent from my GT-I9100 using XDA App
I've played with the SuperSonic version of this phone (which has a 1.5Ghz core) and the results from photos/video are much better, I'm pretty sure the cameras are exactly the same but the SuperSonic benefits from the higher CPU.
I think it would be cool if somebody could write an app that states
IF user opens Camera application voltage + clock speed is increased to allow stable 1.5GHz speed
WHEN user closes camera application overclock turns off.
Thoughts?
You have a smartphone! Not a pc!
I didnt see any advantage if you oc to 1.5
Btw In normal use your phone keep in 200mhz not 1.2.
I think i only hit 1.2 two or 3 times for 3 seconds in a full battery cycle.
Sent from my GT-I9100 using xda premium
oc dosnt make sense ,there no noticeable diff,an yes very few times i hit 1.2 mostly its on 800 or few times on 1000....using a device with 1.5ghz proccesor an oc a device to 1.5 ghz which has 1ghz processor is very diff in nature....
Fair enough.
Well I wouldn't mind an app that mazes out at 1.2GHz with camera app open, as it can lag when shooting HD.
oc upto 1.4 ghz is fair enough, anything more than that is a waste. though you cant find any visible difference between 1,1.2 and 1.4 it does helps in maintaining smoothness on some situations.
yes very true i had oc my sgs1 at 1.2ghz and sgs2 at 1.4ghz but frankly i dint see the diff so after few days use i turnd to orignal settings....but many use oc an phone works fine,but depends on personel use......an yes as bala_gammer says its fine on 1.4ghz......cheeeerz
is overclocking galaxy s2 to 1.3gh safe
HEY pople and friends i want to overclock my samsung galaxy s2 to 1.3gh soo is it safe ??????.
imad.d said:
HEY pople and friends i want to overclock my samsung galaxy s2 to 1.3gh soo is it safe ??????.
Click to expand...
Click to collapse
hey mate
u really think 100mhz would make that much change? its safe btw... seen people running s2 at clock speed higher than 1.3ghz
Plz help @..Longtime hd gaming(gta sa,nfs mw , asphalt,modern combat...) using 1.4 ghz is safe?
I also noted that gameloft games are makes more over heat for phone..
Which is the best and safe voltage level for 1.4 ghz 1250mv or 1275mv or 1300mv
Iam using siyah v6.0b5 kernel with wizzedkat 3.1..
Sent from my GT-I9100 using XDA Premium 4 mobile app
Well u do not see much difference on daily usage due to oc..but it does give a smoother experience while playing high quality games
Sent from my GT-I9100 using Tapatalk
Related
call me a noob but i gotta ask, just what does the kernals do to the phone thats so special, and all the ghz talk means what. i rooted my device for the teather and customizing, and now i see all this talk of kernal this, overclock that, and different ghz people are getting can someone explain to me what this does for your phone, should i be interested???
popcorn kernals?
the higher your ghz the faster your phone is.
overclocking is making your ghz higher
and kernals is what allows you to overclock(sorta)
lol dude...you should prob. take your time with customization but ghz is in reference to the speed of the processor. So...theoretically the higher the number the better your phone should perform...t, eoretically lol. Note that with a higher ghz value the worse your battery life will be unless the kernel is written really well. Also the kernel is the code that controls the devices hardware. (brain)
The nice thing is that you can generally play with different kernels without having to wipe and redo your phone. Also, if you really want to play with the various kernels out there you should get setcpu from the market. It let's you set your phone to make use of the processor in an over clocked (OC) application but it can also let you under clock your phone when your not using it, such as when the screen is off. This will help you conserve battery life. But be careful, over clocking can lead to over heating and other problems if you''re not careful
sounds very interesting, hmmm. so in the coming months people could create kernals to acheive speeds to challenge dual core phones
the kernels already are challenging dual core phones. The thunderbolt currently has a 2ghz kernel. The motorola atrix is a 1 ghz dual core... Thunderbolt definately rivals it with overclock kernel
Sent from my ADR6400L using XDA App
A "kernel" is the OS layer that sits between the applications and hardware. So, when an application says "light up LED" it eventually goes through the kernel to do this, most likely by a request/system call.
The speed of a CPU is measured in hertz (frequency). So, a 1 Ghz CPU can perform over 1 billion operations in one second. The frequency can be increased (overclocked). When you do so, this can damage the CPU (most likely due to heat). Heat can also cause the CPU to run efficiently. So, if you overclock too high, you COULD end up running slower than if you had just left it at 1 Ghz. Changing the frequency can also hinder stability.
so with it being so dangerous how do u know what kernal to trust and whats a safe limit in hertz, do u stop at 1.5, because 2ghz sounds like pushing it
This thread is so full of misinformation it is comical. To start, higher clock speed does not always result in better performance.
Secondly, everyone has their own preference. The best bet is to find the perfect balance for your needs. For many people, overclocking the CPU is not very beneficial... since the device is already plenty fast at stock 1GHz speeds. A lot of users would rather use custom kernels to make their device more power efficient and use SMARTASS governors and lower voltages.
Mess around with kernels and see what you like the best! (always remember to create a backup before flashing... this allows you to easily revert back if something goes awry).
You mean they're not popcorn kernels?? Lol
bmcclure937 said:
This thread is so full of misinformation it is comical. To start, higher clock speed does not always result in better performance.
Secondly, everyone has their own preference. The best bet is to find the perfect balance for your needs. For many people, overclocking the CPU is not very beneficial... since the device is already plenty fast at stock 1GHz speeds. A lot of users would rather use custom kernels to make their device more power efficient and use SMARTASS governors and lower voltages.
Mess around with kernels and see what you like the best! (always remember to create a backup before flashing... this allows you to easily revert back if something goes awry).
Click to expand...
Click to collapse
Very well written and informative post, thanks brah!
skinien said:
A "kernel" is the OS layer that sits between the applications and hardware. So, when an application says "light up LED" it eventually goes through the kernel to do this, most likely by a request/system call.
The speed of a CPU is measured in hertz (frequency). So, a 1 Ghz CPU can perform over 1 billion operations in one second. The frequency can be increased (overclocked). When you do so, this can damage the CPU (most likely due to heat). Heat can also cause the CPU to run efficiently. So, if you overclock too high, you COULD end up running slower than if you had just left it at 1 Ghz. Changing the frequency can also hinder stability.
Click to expand...
Click to collapse
+1 ninja point for correctly saying "over 1 billion"
Sent from my ADR6400L using XDA App
It should be noted that most phones are definitely capable of being overclocked to a reasonable extent.
the majority of kernels we nexus one users play with, is undervolting the and playing with teh voltage tables to maximize standby battery life, at the same time overclocking the high end to improve performance. but really its about lowering voltage to improve battery life.
My phone is running on CM7 Beta 3 and I want to overclock it to 1.5 Ghz I followed the inscructions here http://bugbig.com/how-to-overclock-motorola-atrix-4g-to-1-5-ghz
and when I typed on the emulator : ''insmod olympus_overclock.ko'' it was written : insmod: init_module 'olympus_overclock.ko' failed (exec format error)
I'm running on Faux's kernel (faux123) so what can I do to overclock my phone to 1.5 Ghz ?
Thank you in advance
Why 1.5? What's magic about that number? Doubt we will ever see 1.5 on Atrix. Dual core already gets hot enough at 1.1 and there is no cooling available. Different to a single core OC.
Assimilated via WinBorg 4G
that guide is extremely outdated. the kernel module you're trying to use was released before the bootloader was unlocked, and as far as i've read from Faux123 there is something limiting our ability to overclock that we just haven't broken through yet.
belig1234 said:
My phone is running on CM7 Beta 3 and I want to overclock it to 1.5 Ghz I followed the inscructions here http://bugbig.com/how-to-overclock-motorola-atrix-4g-to-1-5-ghz
and when I typed on the emulator : ''insmod olympus_overclock.ko'' it was written : insmod: init_module 'olympus_overclock.ko' failed (exec format error)
I'm running on Faux's kernel (faux123) so what can I do to overclock my phone to 1.5 Ghz ?
Thank you in advance
Click to expand...
Click to collapse
A few things to consider.
May be the kernel you are using is not meant to work with CM7 Beta.
May be you are following the steps but the guide itself is broken.
May be you are trying to OC your phone to 1.5 GHz but the script is broken.
You said you are running Faux's kernel, well that kernel is only taking your phone to 1.1 GHz, how and why do you expect your phone to magically OC itself to 1.5?
Just 2 cents : I agree with CaelanT, this phone is a Monster itself. When you OC your phone to 1.1, it just bloody flies... Whats the need to OC it all the way to 1.5? Also, while OC'd, it heats up like a *****... I have seen my phone temperature reaching > 45 degrees... Man, it feels like a burning charcoal... I am just wondering if one will actually end up blowing up his/her phone just cuz of OC'd phone.
I actually keep mine underclocked...
Cheers!!!
creativedevil said:
A few things to consider.
May be the kernel you are using is not meant to work with CM7 Beta.
May be you are following the steps but the guide itself is broken.
May be you are trying to OC your phone to 1.5 GHz but the script is broken.
You said you are running Faux's kernel, well that kernel is only taking your phone to 1.1 GHz, how and why do you expect your phone to magically OC itself to 1.5?
Just 2 cents : I agree with CaelanT, this phone is a Monster itself. When you OC your phone to 1.1, it just bloody flies... Whats the need to OC it all the way to 1.5? Also, while OC'd, it heats up like a *****... I have seen my phone temperature reaching > 45 degrees... Man, it feels like a burning charcoal... I am just wondering if one will actually end up blowing up his/her phone just cuz of OC'd phone.
I actually keep mine underclocked...
Cheers!!!
Click to expand...
Click to collapse
+10
/10 chars
Hi,
If there is a limit on clock frequencies, in my experience that implies a multiplier register needs to be changed. But a 50% overclock is rather ambitious, 10% is probably the safest range.
Cheers!
NFHimself said:
Hi,
If there is a limit on clock frequencies, in my experience that implies a multiplier register needs to be changed. But a 50% overclock is rather ambitious, 10% is probably the safest range.
Cheers!
Click to expand...
Click to collapse
Excessively overclocking mobile devices - is an incredibly stupid idea,... unless you have no problem getting a hardbrick one day.
Try overclocking your desktop PC up to 50% without additional cooling and let us know how it goes. Phones have NO cooling, they weren't meant to be overclocked that much.
Besides our current Tegra 2 setup has enough performance for everything available on Android at this moment.
If anything is lagging for you, that's because:
1. Motorola released crappy laggy motoblur
2. some app developer released crappy laggy app
Why does overclocking always turn into a penis measuring contest?
Focus on software optimisation, not on more raw performance to make up for crappy code.
ok thank you everyone I'll stick with kernel faux123
xploited said:
Excessively overclocking mobile devices - is an incredibly stupid idea,... unless you have no problem getting a hardbrick one day.
Try overclocking your desktop PC up to 50% without additional cooling and let us know how it goes. Phones have NO cooling, they weren't meant to be overclocked that much.
Besides our current Tegra 2 setup has enough performance for everything available on Android at this moment.
If anything is lagging for you, that's because:
1. Motorola released crappy laggy motoblur
2. some app developer released crappy laggy app
Why does overclocking always turn into a penis measuring contest?
Focus on software optimisation, not on more raw performance to make up for crappy code.
Click to expand...
Click to collapse
Hi,
The internet has heard your complaint and will adjust itself accordingly. Lol
Cheers!
Sent from my MB860 using xda premium
Faux just tweeted ATRIX can be overclocked to 1.3 http://rootzwiki.com/showthread.php?t=1873
Sent from my MB860 using XDA App
I just overclocked my sgs 2 to 1.6ghz so I'm sure the Atrix will get there soon.
Sent from my Xoom using xda premium
I would like to see 1.5ghz too. hopefully our chipset can handle that
When I look in system info in quadrant after running full bench it only shows 1 core but when I reboot or end application and relaunch it recognizes both cores.
belig1234 said:
My phone is running on CM7 Beta 3 and I want to overclock it to 1.5 Ghz I followed the inscructions here http://bugbig.com/how-to-overclock-motorola-atrix-4g-to-1-5-ghz
and when I typed on the emulator : ''insmod olympus_overclock.ko'' it was written : insmod: init_module 'olympus_overclock.ko' failed (exec format error)
I'm running on Faux's kernel (faux123) so what can I do to overclock my phone to 1.5 Ghz ?
Thank you in advance
Click to expand...
Click to collapse
That module doesnt work, please check 0.1.8 from faux, everybody is having bootloops, but im loving to have 1.3ghz OC ^^
Sent from my MB860 using XDA App
ChongoDroid said:
I just overclocked my sgs 2 to 1.6ghz so I'm sure the Atrix will get there soon.
Sent from my Xoom using xda premium
Click to expand...
Click to collapse
SGS2 starts out with dual core 1.2GHz, so technically you haven't reached a .5GHz OC there. Even if you did, comparing the SGS2 to the Atrix is apples to oranges.
The problem with the Atrix is not only whether the hardware will OC to 1.5GHz. Heat is the biggest problem, and with very high temps on a 1.1GHz OC under load I doubt as I mentioned before we will ever reach 1.5GHz.
I don't know what temps the SGS2 processor gets to, so I can't comment on that.
1.1/1.2 GHz is quite fast enough for me, and as someone else said, it just turns into an epeen war, with no actual rhyme or reason for wanting to OC so high other than to see if it is possible, which is all good and well.
I can OC my PC way higher than it currently is, but I choose a conservative approach because I do not want to fry any components, have graphical artifacts, etc. Same goes for my phone. I want stability and to not have to wave it around in the air to manually actively cool it!
CaelanT said:
SGS2 starts out with dual core 1.2GHz, so technically you haven't reached a .5GHz OC there. Even if you did, comparing the SGS2 to the Atrix is apples to oranges.
The problem with the Atrix is not only whether the hardware will OC to 1.5GHz. Heat is the biggest problem, and with very high temps on a 1.1GHz OC under load I doubt as I mentioned before we will ever reach 1.5GHz.
I don't know what temps the SGS2 processor gets to, so I can't comment on that.
1.1/1.2 GHz is quite fast enough for me, and as someone else said, it just turns into an epeen war, with no actual rhyme or reason for wanting to OC so high other than to see if it is possible, which is all good and well.
I can OC my PC way higher than it currently is, but I choose a conservative approach because I do not want to fry any components, have graphical artifacts, etc. Same goes for my phone. I want stability and to not have to wave it around in the air to manually actively cool it!
Click to expand...
Click to collapse
hahahaha well said! but how is comparing the 2 apples to oranges??? aren't they almost identical
is there any option to raise SGS3 CPU to 2000mhz or something like that?
EDIT: NEW AS 14/7
kk so i guess the highest and most stablest cpu might be till 1800mhz
1and what about ram? there is any overclocking for ram memory? (couldnt find anything about it)
2what about GPU?
not yet, i think the highest clock right now is 1.5 for the sgs3
and RAM, NO you can not get MORE ram, you can eliminate apps that eating up ram to free some up but no way to get more ram.
is there any need to overclock this beast lol its fast enough
the2rrell said:
not yet, i think the highest clock right now is 1.5 for the sgs3
and RAM, NO you can not get MORE ram, you can eliminate apps that eating up ram to free some up but no way to get more ram.
Click to expand...
Click to collapse
He wasn't referring to getting more RAM though was he? It read to me that he wanted to see if was possible to increase the clock speed of the RAM along with the CPU.
yep just wondering if there is any option for that as in SGS1+2
do you guys think when there is OC for s3, it will raise CPU to 2000MHz ?
darixtorento said:
yep just wondering if there is any option for that as in SGS1+2
do you guys think when there is OC for s3, it will raise CPU to 2000MHz ?
Click to expand...
Click to collapse
Already there OC/UV running 1500Mhz right now. Max 1800Mhz.
Look into de developers topics for the kernel..
Ive looked there.. stiil misunderstand something-
there is any OC of 2000mhz now?
Note that the Exynos 4Core CPU is still not very well understood and may well get long-time damage when ramping up the clock speed aggressively.
Is there actually ANY need for going so high except to show off?
You'll be measuring any speed improvement in loading things up in microseconds because people say Samsung still hasn't fully optimised the phone to the OS yet, so I think it's a bit pointless stressing the phone that much.
1.8GHZ is currently the max however with kmemhelper you should be able to change the last frequency to 2.0...
Hell I'll even find out the script for you if you are mad enough to try it first
Sent from my GT-I9300 using xda premium
I doubt you'll get it 2GHz stable anyway. From what I've heard most people have theirs crap out at 1.8GHz.
kk so i guess the highest and most stablest cpu might be till 1800mhz
1and what about ram? there is any overclocking for ram memory? (couldnt find anything about it)
2what about GPU?
to make it clear:
i wanna know which ram overclocking is available to do on the SGS3 as long as the device still stables.
same with GPU and all those stuff.. there is a really good lvl of OC like in S1 S2?
still waiting for help
I would go for Siyah kernel and try 1.8 GHz then under volt using voltage control or extweaks app. Most phones can go 100 mv on all steps except maybe the very highest clocks.
gpu overclock is not possible yet
Sent from my GT-I9300 using xda premium
OC of the ram is connected to bus speed and this is very different to the fixed bus in the sgs1 so nothing like live oc is possible. Still 400 mhz bus speed is 4 times faster than the CHAt!
Sent from my GT-I9300 using xda premium
I`am running RGUI v7 rom and siyah kernel 1.3.8a. My clockspeed is 1600 Mhz and is rockstable, snappy and battery life is great.
I don`t go any higher for daily use, it doesn`t make much difference in speed and i think it cuts down your cpu-life.
ho so no LIVE OC is available now? (like in S1 and s2)?
well hoping it will be possible to add those functions(live oc, ram, cpu, and more..) in Android JB 4.1
My Captivate (SGS1) can hit 1.92GHz... So I think that a CPU with a stock clock of 1.4GHz can hit 2GHz easily. We will just have to see. I am not pushing this phone though. I don't have $700 to replace it.
well hoping it will be possible to add those functions(live oc, ram, cpu, and more..) in Android JB 4.1
Click to expand...
Click to collapse
That's not depended on the ROM but on whether the hardware allows to modify the values and if kernel developers figure out how to do it.
after root... i have installed SetCpu, i have overclock my processor to 1.4ghz.. the question is, can i use this setting for daily use? is it will cause my processor hot or damage??
Every CPU is different, some can handle 1.4, some can 1.6 and some can't even 1.3GHz.
I've been using 1.4GHz max and 400GHz min, and I get about 4700 in Quadrant, and I reduced homebutton lag to minimum. Some can't see difference between 1.4 and 1.2 and some can (like me). Works just fine.
emoskremo said:
after root... i have installed SetCpu, i have overclock my processor to 1.4ghz.. the question is, can i use this setting for daily use? is it will cause my processor hot or damage??
Click to expand...
Click to collapse
well overclocking or undervolting ur device is not recomended for daily usage as they r done only to do some benchmark tests
emoskremo said:
after root... i have installed SetCpu, i have overclock my processor to 1.4ghz.. the question is, can i use this setting for daily use? is it will cause my processor hot or damage??
Click to expand...
Click to collapse
The higher the min frequency is the higher the chance something will go wrong.. Ie overheat, reboots
Sent from my GT-P7510 using xda premium
emoskremo said:
after root... i have installed SetCpu, i have overclock my processor to 1.4ghz.. the question is, can i use this setting for daily use? is it will cause my processor hot or damage??
Click to expand...
Click to collapse
1.4 will be fine ;-)
I've overclocked all my previous androids & never had issue
OT: I was surprised that a stock 1.2Ghz ph can't go higher than 1.6!?
my moto defy is b/l locked 800Mhz @ stock & I run it @ 1.2Ghz w/o probs. 50% increase... SGS-II should be able to do 1.8Ghz on that math
after root... i have installed SetCpu, i have overclock my processor to 1.6ghz.. the question is, can i use this setting for daily use? is it will cause my processor hot or damage??
Depends on the phone. Mine can't run above 1.4ghz stable (but my GPU can overclock easily).
^What he said. Try it for a while, but if you get reboots or freezes, pull it back to 1.4 or 1.2.
if it runs stable then you can no problem
Watch your temp. Might be a phone but it's the same as a computer. That reno gets to high, and you're looking at overheating and possibly causing corrupted files from shut downs or worse, hardware damage.
Correct me of I'm wrong.
Clay
Sent from my SGH-I777 using XDA
emoskremo said:
after root... i have installed SetCpu, i have overclock my processor to 1.6ghz.. the question is, can i use this setting for daily use? is it will cause my processor hot or damage??
Click to expand...
Click to collapse
Just make sure you don't check "Set at boot" until you're sure you can set it at 1.6 with out reboots and crashes...... GL
Why 1.6ghz all the time? 1.4ghz uses MUCH less power (meaning less heat as well) and is 99% as smooth.
Colton127 said:
Why 1.6ghz all the time? 1.4ghz uses MUCH less power (meaning less heat as well) and is 99% as smooth.
Click to expand...
Click to collapse
Very good point....
I underclock to 800 . And phone is just as snappy. Why would ya wanna use 1.6 out of curiosity ?
Sent from my SGH-I777 using Tapatalk 2
Honestly the only reason someone would overclock to 1.6 GHz would be for bench marking, which i find useless. My processor is usually clocked to 800 MHz and i can play games like N.O.V.A. 3 with only slight lags here and there.
I do something similar to a few people here. I keep it at 800 most of the time and bump it up to 1000 when I'm playing certain games. Then back to 800 when I'm done. Responsive enough for whatever I have to do and doesn't overheat.
Wow OP
What a question OP.
I can't believe no one called you out yet.. I will be the first
If you want to kill your phone hardware then keep it at 1600! (which is overclocked too you dummie)
USE SetCPU so that your phone can
1. remain cool when high CPU cycles are needed
2. save battery by making profiles especially for when your phone screen is off
...
ok theres good guides out there. just google it