Hi guys,
I currently have my Photon rooted and unlocked running the 2.3.5 Hybrid (Stock/CM7) rom. Was wondering if anyone has a mod that would allow me to wake the screen with the volume buttons? I was running cm7 and it was a great feature but I switched roms because the camera and camcorder were freezing on me. Just wondering if it was possible to add it. thanks in advance
I'm still using cm7.2 and never ever had cam and video freeze but to turn screen on or off try smart screen on (off) app which uses proximity sensor. I'm using the off feature and works good so far but takes a little tweak to get it to work. Also using volume button to wake up and loving it.
Sent from my MB855 using XDA
dito33 said:
I'm still using cm7.2 and never ever had cam and video freeze but to turn screen on or off try smart screen on (off) app which uses proximity sensor. I'm using the off feature and works good so far but takes a little tweak to get it to work. Also using volume button to wake up and loving it.
Sent from my MB855 using XDA
Click to expand...
Click to collapse
Yeah Ive been using cm7 for the last 2 weeks and am loving the toggles and volume wake. Best rom for the Photon.
Equalizir said:
Hi guys,
I currently have my Photon rooted and unlocked running the 2.3.5 Hybrid (Stock/CM7) rom. Was wondering if anyone has a mod that would allow me to wake the screen with the volume buttons? I was running cm7 and it was a great feature but I switched roms because the camera and camcorder were freezing on me. Just wondering if it was possible to add it. thanks in advance
Click to expand...
Click to collapse
I'm on the same rom and I really miss that feature. I found 2-3 articles that tell you how to mod android.services.jar to make it where the volume keys will wake the screen but I couldn't get it to work on this rom. If anyone has any suggestions or ideas that would be great!
I also tried above but its not working ..
Related
I am running BAMF Sense 3.0 RC3 (Imo's leanKernel running at Extreme with MR2), and I use WidgetLocker. Quite often, I will go to unlock my touch screen and my touching capabilities are not working - I can slide my slider, or do anything. I can hold down the power button to come up with the shutdown/restart options, but I cannot touch them to make it work. Sometimes if I wait a while it works again, or if I get another message/e-mail, but one time I had to pull the battery! I am not sure if this is a known issue or if maybe this is something with WidgetLocker, but does anyone know what I can do to fix this or have any suggestions? Any help would be appreciated! Thanks!
Bump - anyone else have this problem? Is it WidgetLocker, and maybe I need to make it no longer use RootHelper or something? When this happens (it currently is), only the power button works - all others do no effect, although they make a vibrate noise when pressed as if there are. After 10 minutes it will work again...)
Just a thought... Bump your min cpu setting to 368 and see if that helps.
Sent from my ADR6400L using XDA Premium App
Thanks, I did not think of that - I will change from Extreme to Normal (since Extreme undervolts it) and I will give that a try. Any other suggestions in case that does not work?
That's all I know man. I bet its a setting issue on the kernel.
Sent from my ADR6400L using XDA Premium App
You could always try switching to dream kernel 2.3.0 or 2.3.2, which are updated versions of the sense 3.0 stock kernel from das bamf. But I'm guessing that your min cpu setting is too low, especially if its undervolted. I have lag setting it to 245/368 with screen off, but its just laggy.
I tried changing settings on Imo's kernel, still no avail. His kernel gives me great battery life so I am trying to not switch to a different one; I was looking in Das BAMF toolkit and originally I had Sense Lock Screen off, which is when the lock screen froze, and when I turned it back on, I still had the lock screen froze but now sometimes the Sense one came into view, frozen. And by frozen, I mean the touch screen doesn't work - I can wake on with the volume keys and power button, but none of the bottom buttons work too. I am baffled... What could cause this?
Aup808 said:
I tried changing settings on Imo's kernel, still no avail. His kernel gives me great battery life so I am trying to not switch to a different one; I was looking in Das BAMF toolkit and originally I had Sense Lock Screen off, which is when the lock screen froze, and when I turned it back on, I still had the lock screen froze but now sometimes the Sense one came into view, frozen. And by frozen, I mean the touch screen doesn't work - I can wake on with the volume keys and power button, but none of the bottom buttons work too. I am baffled... What could cause this?
Click to expand...
Click to collapse
No idea, but the easiest solution is likely to wipe and flash again. For other lockscreen issues this has been the most successful solution.
Sent from my ADR6400L using XDA Premium App
Yeah, I was thinking about this... Considering I have Bamf 3.0 RC3, might just wipe and get RC4. I will let you guys know how I make out! Thanks for the suggestions!
Off topic question though... How do I edit the Swype dictionary?
Sent from my ADR6400L using XDA App
Aup808 said:
Yeah, I was thinking about this... Considering I have Bamf 3.0 RC3, might just wipe and get RC4. I will let you guys know how I make out! Thanks for the suggestions!
Off topic question though... How do I edit the Swype dictionary?
Sent from my ADR6400L using XDA App
Click to expand...
Click to collapse
Don't forget to check out the preview of the rc5. It can be found on teambamf dot net. It is like rc4 but is very nice, especially with the new radio.
Sent from my ADR6400L using XDA Premium App
And as for swype, I think in options, by hitting that button on bottom right or through settings, there's a way to reset or tell it to not remember, but no way to edit I don't believe. There's a way to get it to ignore some words but its been so long I've forgotten.
Sent from my ADR6400L using XDA Premium App
Is there a way to make the home button respond instantly?
Does anyone else have this problem?
Sent from my GT-I9100 using XDA Premium App
It has something to do with the Voice control samsung built into the phone, people were saying you can freeze/ delete the app and your home button will be instant, i can personally vouch for this because I'm using CM7, a rom that doesn't have the voice control and my home button actually is instant.
it something to do with the processor and power management.
The delay is present in CM too but not as bad
drgopoos said:
it something to do with the processor and power management.
The delay is present in CM too but not as bad
Click to expand...
Click to collapse
I thought that had to do with the wakeup "lag" i.e. just waking the phone up from sleep, if you are talking about that yes its present in CM as well. I thought he was asking about home button when exiting out of apps and such, as i noticed a slight delay in that when i was using the stock rom.
I've froze voice commands with Bloat Freezer and this hasn't made any difference :/
Since KG1 firmware, home button lag has been solved. Home button acts normal now.
The OP hasn't explained what his problem actually is, so there's no point telling him to freeze apps!
@jameslfc5
Do you mean it takes a couple of seconds when the screen is off and you wake the phone with the home button, or do you mean it pauses when you're running an app and you press home to go back to your home screen?
jameslfc5 said:
Is there a way to make the home button respond instantly?
Does anyone else have this problem?
Click to expand...
Click to collapse
It responds instantly when connected to a charger. So it must be software related. I haven't found any 2.3.3. or 2.3.4 ROMs that remove the lag entirely. I'm sure someone will figure it out though.
When connected to charger the phone does not sleep. So no lag.
I have same problem as OP.
Note - it's not the wake-up delay, which is also annoying. It's the regular "go back to home screen" delay when using the phone.
I'm running Cognition 1.31, and problem was present on Stock ROM, VillainROM, Cognition 1.15 and 1.31.
I had voice control only on Stock ROM, and don't have it now - no difference. Delay is about 0.5-1 second.
Super annoying. Makes it feel slow. Was not present on any of the SGS ROMs.
+1
I just think of an iPhone... it's better in only this thing
CM7 fixes it. I think I know what you mean, I had it in Cognition 1.31 and litee'ning rom. Now I don't or don't even notice it.
Sent from my GT-I9100 using XDA App
DarkDvr said:
I have same problem as OP.
Note - it's not the wake-up delay, which is also annoying. It's the regular "go back to home screen" delay when using the phone.
I'm running Cognition 1.31, and problem was present on Stock ROM, VillainROM, Cognition 1.15 and 1.31.
I had voice control only on Stock ROM, and don't have it now - no difference. Delay is about 0.5-1 second.
Super annoying. Makes it feel slow. Was not present on any of the SGS ROMs.
Click to expand...
Click to collapse
Yeah this is my exact problem I don't think removing voice command has helped to be honest
Sent from my GT-I9100 using XDA Premium App
Did this actually get fixed in 2.3.4? The home button lag not the waking lag.
Nope.
Sent from my GT-I9100 using Tapatalk
Anyone know of a fix?
Sent from my GT-I9100 using XDA Premium App
if u r using CM then there is no home lag.
THe wakeup lag is still there but i would say very minimal
Hello,I was just wondering if anyone knew of a way to disable the light on the capacitive buttons after installing CM9 with soft button mod? Thanks and sorry if this has been covered.
There is an app called Screen Filter in the play store that enables you to turn off the key lights. It works for me and you should go check.
Sent from my YP-G70 using XDA
Look here:
http://forum.xda-developers.com/showpost.php?p=18890131&postcount=266
I use Screen Filter too and it's pretty simple... You just have to open the app everytime u turn on or reboot ur gp.
gsc1134 said:
Hello,I was just wondering if anyone knew of a way to disable the light on the capacitive buttons after installing CM9 with soft button mod? Thanks and sorry if this has been covered.
Click to expand...
Click to collapse
I think if you have the AOKP ROM then theres a option there to disable them manually
Here is my guide http://forum.xda-developers.com/showthread.php?t=1374233
It should work on every rom/stock.
thanks guys, I am using screen filter now and it is working - though I dont think it worked for me on GB. Also, I will try to get LEDKill working as a permanent solution.
I dont think I am using the AOKP rom, I am just using the CMP for SGP 5.0 USA rom from the dev section. Does the AOKP rom happen to have working bluetooth? For that matter, do any of the the ICS roms have working bluetooth?
bluetooth isnt working in any ics/cm9/miui room cuz all are based on cm9 where bluetooth isnt working
Hi all,
After I had installed the Bezke Aokp ROM my vibration worked inconsistent.
Sometimes it worked, but in many cases it just didn't.
This also goes for vibration keys.
Yet when I put my phone in landscape mode the vibration works perfectly.
I uninstalled the AOKP ROM of Bezke due to lot of instability and I installed the Resurrection ROM which is by far the best and most stale.
Unfortunately my vibration even for the keys is completely gone even I checked the vibration in settings.
Can somebody help me please?
Sent from my GT-I9100 using XDA Premium HD app
hey guys, just wondering that on the razr the navigation buttons (home, back, search etc.) leds can be toggled to stay on at all times? i find it little annoying not knowing which button im pressing durring the day, i am currently useing AOKP 4.04 GSM Razr thanks guys!
technolust109 said:
hey guys, just wondering that on the razr the navigation buttons (home, back, search etc.) leds can be toggled to stay on at all times? i find it little annoying not knowing which button im pressing durring the day, i am currently useing AOKP 4.04 GSM Razr thanks guys!
Click to expand...
Click to collapse
Not sure how you would go about this but I really want to ask why? Just because? Or is there a practical reason behind it?
https://play.google.com/store/apps/...1bGwsMSwxLDMsImNvbS5kZXNrYW5nZWwua2JsaWdodCJd
that should work, you might have to disable then re enable when you reboot
ooohhaaahh said:
https://play.google.com/store/apps/...1bGwsMSwxLDMsImNvbS5kZXNrYW5nZWwua2JsaWdodCJd
that should work, you might have to disable then re enable when you reboot
Click to expand...
Click to collapse
I may take a look at that. Not sure when I'd need it but can't hurt to have more tools! Thanks!
Sent from my DROID RAZR using XDA
some places (with stock, or builds that work like stock) if the light sensor "sees" that it is bright enough the home, back, ect will have the backlight turn off. but i can't see the buttons unless the backlight is on.
i'm using the gummy rom so my button light are always on.
This App ROCKS!!!!