Ok, call me a noob, dumbass, idiot,whatever. I failed at supercharging my gs2 and completely forgot to make a copy of the stock services.jar file. I am now having wifi issues only since I messed with it while trying to supercharge... I know, you don't need to if you're using phonebricker... Don't ask me why I did it, probably due to having to go back and forth between my phone, my 11 month old daughter and talking with my fiancé about things I don't care about and just plain forgetting.
Anyway, I've searched for the file, I've searched for the download repository (where the hell is it?!) And now im stuck. No wifi, though I won't be running out of data anytime soon, is annoying.
Clay
Sent from my SGH-I777 using XDA
I've flashed a new modem and kernel for kicks. Nothing. I've wiped, no dice. Only thing that I can think of is to flash a new rom unless I can get the stock services.jar file.
Clay
Sent from my SGH-I777 using XDA
you can download whatever ROM you feel like and pull the service.jar from the zip
if you are using phonebricker rom, just reflash the rom without wiping....it will replace whatever was messed up
You sir, are a genius... However, my problems seem to stem from somewhere else as that didn't work!
My phone sees the network, has the correct password but will not connect still. Hmmm.
Clay
Sent from my SGH-I777 using XDA
Pirateghost said:
if you are using phonebricker rom, just reflash the rom without wiping....it will replace whatever was messed up
Click to expand...
Click to collapse
As in literally just reflashing in CWM? 10-4.
Sent from my SGH-I777 using XDA
MOTHER F*CK*R!!!
So... My fiancé now decides to tell me that she hasn't had any wifi all day on her iPhone 4s... The problem has been our modem... A quick reboot and wifi is back.
Now, I have to go back and re-SuperCharge my phone... Ugh. At least I had it right the first time?
Thanks for the suggestions fellas. Hopefully the lols are worth yalls effort and time.
Clay
Sent from my SGH-I777 using XDA (Now with WiFi)
Related
Ok so i restored my stock backup because i needed to do a fresh install of unnamed. now when i turn the phone off it comes right back on and when i try to go into recovery it just continues booting up. what have i done and what do i need to do?
Even with phone on you can press and hold power and both volume up and down. Keep holding it and it will boot you into recovery.
Sent from my páhhōniē
there is no need to go to stock to do a new rom flash
The problem is fixed but now i face a new dilemma. When i go to turn the phone off it comes right back on. Even with a hard shut down. Also happens when i pull the battery and put it back in. It will turn on again by it self. I am on unnamed 1.3.1 with the blue monkey theme. Any ideas?
what if maybe your power button is tweaked?
I guess warranty wouldnt cover it because I'm rooted?
Sent from my SAMSUNG-SGH-I777 using xda premium
MWilkenson said:
I guess warranty wouldnt cover it because I'm rooted?
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
If you revert the root using entropy rom and a jig you can return it for warranty work undetected.
Sent from my SAMSUNG-SGH-I777 using xda premium
k4zyn said:
If you revert the root using entropy rom and a jig you can return it for warranty work undetected.
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
Alright thanks. Ill look into it. me being an android noob is not helping the situation lol.
Sent from my SAMSUNG-SGH-I777 using xda premium
MWilkenson said:
Alright thanks. Ill look into it. me being an android noob is not helping the situation lol.
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
+1
True
jk
Be still true
Sent from my páhhōniē
Ok I'm honestly baffled here. My battery life has been terrible. Here's what has been done recently. two days ago I restored my stock back up and flashed unnamed 1.3.1. Noticed my battery was dying very quickly. So I went into cwm. Wiped data, cache and davik cache and reflashed unnamed 1.3.1. My battery is dying no exaggeration about 10% every 40-50 minutes. In addition to all this...my phone wont stay turned off. It turns it self on after about 2 seconds. Ugh please help me.
Sent from my SAMSUNG-SGH-I777 using xda premium
Wow. That's pretty rough. I say go back to 100% stock and see how it goes. If it still is dropping that fast your battery may be bad.
Sent from my páhhōniē
The phone screen turning back on so often says "rogue app" to me.
I really appreciate the replys. I'm going to take one more day and see how it goes...if its still not working right ill be buying a USB jig and learning how to get back to stock.
Sent from my SAMSUNG-SGH-I777 using xda premium
gr8hairy1 said:
Wow. That's pretty rough. I say go back to 100% stock and see how it goes. If it still is dropping that fast your battery may be bad.
Sent from my páhhōniē
Click to expand...
Click to collapse
Also when you say go back to 100% stock...do you mean like restore my stock back up? Or am i going back to 100% stock unrooted? Or what? I've seen a couple threads, I'm just confused so I apologize. If you could guide me in the right direction I would appreciate it.
Sent from my SAMSUNG-SGH-I777 using xda premium
MWilkenson said:
Also when you say go back to 100% stock...do you mean like restore my stock back up? Or am i going back to 100% stock unrooted? Or what? I've seen a couple threads, I'm just confused so I apologize. If you could guide me in the right direction I would appreciate it.
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
Use Entropy512's return/unbrick to stock package. Or I have an Odin3 OneClick Downloader of his package is you prefer. It's a little easier. See the link in my signature.
There is no such thing as a backup of 100% stock. To make a working nandroid backup, you need to already have a custom kernel installed.
creepyncrawly said:
Use Entropy512's return/unbrick to stock package. Or I have an Odin3 OneClick Downloader of his package is you prefer. It's a little easier. See the link in my signature.
There is no such thing as a backup of 100% stock. To make a working nandroid backup, you need to already have a custom kernel installed.
Click to expand...
Click to collapse
Thank you so much. I will check it out when I get home. So after I do that I'll still be rooted? Or do I need to root again before I flash a rom again? I promise im almost out of noob questions.
And I might try getting a new battery to fix the other problem. I'd hate to have to send my phone in for warranty
EDIT: ok i just looked at your link with odin 3. say i use the one without root. i would essentially be bone stock out of the box correct? and from there i could just start over, use the guide on how to root, etc.?
Sent from my SAMSUNG-SGH-I777 using xda premium
MWilkenson said:
EDIT: ok i just looked at your link with odin 3. say i use the one without root. i would essentially be bone stock out of the box correct? and from there i could just start over, use the guide on how to root, etc.?
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
The only difference between the two packages is one will give you root while the other will not. If you go with the one with root you will be 100% stock aside from root. I only recommend going 100% because then you'll know it won't be any rogue apps draining the battery or issues from a custom rom. If you get the expected battery life stock rom has then you'll know the battery is good. If it's lower than what is usually is for stock rom most at&t stores will replace the battery on the spot for you.
So no benefit of going with the package without root unless you're taking it back to at&t.
Sent from my páhhōniē
ok i just went back to stock + root. about to flash the unnamed rom again. I cannot express how appreciative i am for everyones help and for being patient with me. im slowing learning as much as i can. thanks everyone!
Pay it forward
Sent from my páhhōniē
indeed i will sir.
although i do have another question..sorry. Ok so when i first rooted i became acustom to CWM and flashing unnamed rom themes in that. After i used odin3 one click it gives me the android system recovery 3e and ive never seen it before. can i still flash unnamed through this or do i do something different?
edit: ha nevermind i found it http://forum.xda-developers.com/showthread.php?p=18576627#post18576627
sorry.
i have been looking around but i dont see anything to help. my problem is that i have a samsung att i777 or the galaxy s2, but i have recently flashed new roms and custom kernels an like certain things from all. unfortunatly i dont like any certain one . but the problem is that i tripped my counter and i dont know how to reset it. i have a jig and have tried multipul times, but still nothing. i have odined back to stock everything. just a minute ago i flashed the newest modem but still same prob. while in download mode it says factory mode on top. instead of odin mode. someone with some kind of expierence please can you give me a pointer?
Do you have the right jig
Sent from my SAMSUNG-SGH-I777 using XDA App
I don't understand your problem... Are you trying to return your phone? It only matters if you are bringing it back to att. what it sounds like to me is li dint like any roms i want to go back to stock." To which id say you have it at stock let the counter stay.
But to answer your question... The sgs2 had tighter tolerances on the resistor used, meaning some old ones won't work. Idr what thread it was so use the search feature of the forum to find which jigs people have had good luck with, the info it's out there.
Sent from my SGH-I777 using XDA App
I made my jig with parts from radio shack. Worked for my captivate and works for my GSII
Sent from my SAMSUNG-SGH-I777 using Tapatalk
@pogmothoin17,
If your jig boots your phone into download mode, but the flash counter does not get reset, then somewhere along the line, you flash one of the leaked roms, 2.3.5 or 2.3.6, or you installed an I9100 rom that also installed a secondary bootloader. Since you say the flash counter reads Factory mode instead of Odin mode, I'm guessing you flashed one of the I777 leaks. If you install one of the leaks with the one-click Odin downloader, it will install a new secondary bootloader, that is programmed to not reset the flash counter. I don't know what the flash counter says in that case, but it could be factory mode. It would make sense. Anyway, if that is the case, you need to flash back to the original I777 UCKH7 secondary bootloader. Go here to get the file and instructions.
Well thank y'all for the feedback. No I wasntgonna return the phone I actually love it. Coming from a vibrant especially. I like some things for all the custom Roms and kernels. Just not enough to stay with one for the.moment. I am not in depth enough yet to try and make my own or.customize a.rom .....even though that is what o wanna start doing. The way I look at.it is I took it back to stock to see how this ota. 2.3.6 update was. When I go back to stock I like everything to be normal....as it was new. Its more just a pet peeve. Creepyandcrawlwy I was actually hoping you'd respond as I hear great things about you. I use xda quite a bit but just became a memebr thinking of would help if I had any questions as I advanced in my phone Modding abilities . Thanks again for all the help and ill try all this again.
Sent from my SAMSUNG-SGH-I777 using XDA App
And actually my wifi don't work either after flashing back to stock any ideas?
Sent from my SAMSUNG-SGH-I777 using XDA App
did you wipe data/factory reset?
Yea sure did before and after reflashing
Sent from my SAMSUNG-SGH-I777 using XDA App
It doesn't make sense then. If you flashed back to stock using Entropy's unbrick/return to stock package and a wipe, it should be totally stock, and wifi should work. Could it be a problem with the router?
I dunno I don't get it niether I got my wifi working but still have a count. And phone is not ota updating either. It keeps saying up to date bit I'm still running 2.3.4. My brother got his update.
Sent from my SAMSUNG-SGH-I777 using XDA App
@creepyandcrawly....what is a good rom to flash? If you don't mind me asking
Sent from my SAMSUNG-SGH-I777 using XDA App
Its totally a personal matter. I've been using Unnamed since shortly after I got the phone and there hasn't been any reason to change.
Sent from my SAMSUNG-SGH-I777 using XDA App
Hello all!
Long time reader here.
I've been looking for answers to this for several hours now and haven't been able to find anything that works.
I bought my Photon new about 2 months ago. Immediatly I rooted and unlocked it, with the thought that I was going to play around with custom ROMs as I did on my Epic 4g.
Anyway, this evening I decided to go ahead and put a new ROM on. I did the usuals, delvak, formats, etc.. I started with Joker's Skinny rev1. Install went great, but I was unable to use wifi. I couldnt even turn it on. It just says "Error" on the wifi settings menu. So I did some research and I found out that this is a common problem and simply needed a dhd.ko file to be replaced. So I did via 7zip and reflashed. Still no wifi. I then tried to give ACS's ROM a try, and same thing. So again, I replaced the dhd.ko file and reflashed. Still no glory. I also went ahead and re-unlocked the bootloader again just in case(read a few issues of that messing with wifi).
So needless to say, I can't figure out how to get my wifi back. I'm at a complete loss. Does anyone have any ideas? Also, if it matters, I live state-side. I don't have anything frozen either. Just a freshly installed ACS ROM.
Thanks for any help you guys can offer.
Flash skinny complete
alxlwson said:
Hello all!
Long time reader here.
I've been looking for answers to this for several hours now and haven't been able to find anything that works.
I bought my Photon new about 2 months ago. Immediatly I rooted and unlocked it, with the thought that I was going to play around with custom ROMs as I did on my Epic 4g.
Anyway, this evening I decided to go ahead and put a new ROM on. I did the usuals, delvak, formats, etc.. I started with Joker's Skinny rev1. Install went great, but I was unable to use wifi. I couldnt even turn it on. It just says "Error" on the wifi settings menu. So I did some research and I found out that this is a common problem and simply needed a dhd.ko file to be replaced. So I did via 7zip and reflashed. Still no wifi. I then tried to give ACS's ROM a try, and same thing. So again, I replaced the dhd.ko file and reflashed. Still no glory. I also went ahead and re-unlocked the bootloader again just in case(read a few issues of that messing with wifi).
So needless to say, I can't figure out how to get my wifi back. I'm at a complete loss. Does anyone have any ideas? Also, if it matters, I live state-side. I don't have anything frozen either. Just a freshly installed ACS ROM.
Thanks for any help you guys can offer.
Click to expand...
Click to collapse
Sent from my MB855 using XDA App
Downloading now. Is it also worth mentioning that mt 3G seems extra crappy now?
Sent from my MB855 using XDA App
I really need to update skinny. I plan to do a source build and edit it to death. Cm9 has my free time tied up. It won't be too much longer and I'll get everything going on cm9. Luckily rocko roms are turning out great. Eventually I'll go back and update my blur roms.
alxlwson said:
Downloading now. Is it also worth mentioning that mt 3G seems extra crappy now?
Sent from my MB855 using XDA App
Click to expand...
Click to collapse
Sent from my MB855 using XDA App
Yeah. CM9 is looking nice, but I can't be bothered with all the script stuff right now...and I love my camera
Scripts have nothing to do with your camera. It simply changes a few things to make it faster. Great for stock rooted roms
alxlwson said:
Yeah. CM9 is looking nice, but I can't be bothered with all the script stuff right now...and I love my camera
Click to expand...
Click to collapse
Sent from my MB855 using XDA App
Oh I realize that. I was just saying that I dont want to fool with scripts to get a ROM going. And that i also like having a functional camera.
Why is the rom you pointed me to so heavy?! I think it said 427MB. Biggest ive ever seen!
Any ideas on what is causing the wifi issue?
Sent from my MB855 using XDA App
The radios are sensitive. The wifi driver must be compiled to the kernel you are using. In skinny unlocked it is. Skinny complete is the newest and has an awesome web top modification. Uncompressed its 2 gigs.
alxlwson said:
Oh I realize that. I was just saying that I dont want to fool with scripts to get a ROM going. And that i also like having a functional camera.
Why is the rom you pointed me to so heavy?! I think it said 427MB. Biggest ive ever seen!
Any ideas on what is causing the wifi issue?
Sent from my MB855 using XDA App
Click to expand...
Click to collapse
Sent from my MB855 using XDA App
All flashed up. Wifi working now. Thanks man!
Sent from my MB855 using XDA App
Well not completely working lol. The wifi keeps dropping connection ever minute or so. When its doing this, its also resetting the cdma radio. Im missing a crap ton of calls. Only way i know i am is bc of the voicemails being left. With wifi turned off, all is well.
Sent from my MB855 using XDA App
Anyone have other ideas on this?
Sent from my MB855 using XDA App
Sbf to 198-7, then unlock
alxlwson said:
Anyone have other ideas on this?
Sent from my MB855 using XDA App
Click to expand...
Click to collapse
Sent from my MB855 using XDA App
Isnt that going to take me back to stock? Or does this include some new updates to the radio, etc...?
yes
alxlwson said:
Isnt that going to take me back to stock? Or does this include some new updates to the radio, etc...?
Click to expand...
Click to collapse
Sent from my MB855 using XDA App
Lol im having no luck. Sbf to the 198-7. Working great. Then I realized I no longer have a camera.
So the Sbf.. was that supposed to update some internal software to help make skinny work more stable
Sent from my MB855 using XDA App
198-7 clean install should take your back to like it came from the factory...
http://forum.xda-developers.com/showpost.php?p=20331570&postcount=3
(SBF: 1FF-sunfire-user-2.3.4-4.5.1A-1_SUN-198_7-CM-release-keys-signed-Sprint-US)
It did. But I already knew that. I wanted to use a different ROM. Was trying to figure out the wifi issues instead of going back to stock and forgetting about it..
Sent from my MB855 using XDA App
I'm having the same trouble with Skinny. I flashed the skinny14gedition and everything seems to work except for the wifi (error). Still little new to this but what is an sbf? My phone came with 198_6 not 7, should I still flash to that or is there a wifi fix for skinny? Thanks for any help.
Hello all,
I am the proud new owner (first time android owner as well) of a Galaxy S3 SGH-1747, and I am still learning the ins and outs of the phone but so far I am loving this thing.
However, I did run into some issues when I did an install of a ROM AOKP Task & KToonsez ROM. The first major problem is that my computer will now not read my phone, whereas before it was able to register it. I know I have the correct drivers installed and I have the android usb debugging thing box checked in my settings. I have tried several different USB ports now thinking it might be that but they all do not read it. As smooth as this ROM is, it is still in the early stages and there are a lot of bugs and kinks that need to be worked out still so I would like to either switch back to the stock ROM or aim for a more stable one. I am not sure how I can do either of this without a copy of the original touchwiz ROM on there.
Please help me figure this problem out lol.
Flash your nandroid. I'm sure you made one like you're supposed to.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Stock...
http://forum.xda-developers.com/showthread.php?t=1737848
When you're back to stock....do yourself a favor...MAKE A BACKUP.
Sent from my SAMSUNG-SGH-I747 using xda premium
I did not make a back up
But ever since I installed this ROM my computer stopped reading my phone, it won't even show up on kies either. I am trying right now a factory reset and wipe but it just keeps going back to the same rom.
Mandroid88 said:
I did not make a back up
But ever since I installed this ROM my computer stopped reading my phone, it won't even show up on kies either. I am trying right now a factory reset and wipe but it just keeps going back to the same rom.
Click to expand...
Click to collapse
A factory reset won't make your phone stock man...you need to Odin the stock ROM ...(link I provided) back to your phone.
Sent from my SAMSUNG-SGH-I747 using xda premium
could just flash another Rom
Sent from my SGH-T999 using xda premium
defnow said:
A factory reset won't make your phone stock man...you need to Odin the stock ROM ...(link I provided) back to your phone.
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
Ok, one last stupid question for you though. How would I be able to do this if my computer is not reading my phone? I have Odin installed and all that jazz but the phone will not register on the computer. Will Odin still read it even though it's not showing up under my computer?
Mandroid88 said:
Ok, one last stupid question for you though. How would I be able to do this if my computer is not reading my phone? I have Odin installed and all that jazz but the phone will not register on the computer. Will Odin still read it even though it's not showing up under my computer?
Click to expand...
Click to collapse
If your phone can enter download mode...yes ODIN will read it.
Sent from my SAMSUNG-SGH-I747 using xda premium
Android_Monsters said:
could just flash another Rom
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
He can but he wants to make a back up of his stock ROM.
Sent from my SAMSUNG-SGH-I747 using xda premium
good lord guy...
you being a n00b should really not be flashing right now, as people are losing IMEI's left and right. if i were you id sit right where you are for the time being. play it safe broseph, we wouldn't want your first foray on android to end badly :highfive:
I'm not flashing roms on my s3 yet so I'm not positive but doesn't aosp roms take the Google drivers, not the Samsung ones? I know with the captivate on cm9 I had to install them.
Sent from my SAMSUNG-SGH-I747 using xda premium
defnow said:
If your phone can enter download mode...yes ODIN will read it.
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
+1 This
XDA Mobile
Make sure that when u connect your phone you have it as a camera.
Sent from my SGH-T999 using xda premium
Hi guys, I am very new to the Note 2. I just unlocked and rooted the latest ota using Casual. Thanks to Adam Outler and everyone else involved. So my question is which ROMs are compatible with this ota? Basic question I'm sure. I came from the Razr and the kernel had to match so I assume its the same here? Anyone willing to shed some light on this for me would be greatly appreciated.
Sent from my GT-P3100 using xda app-developers app
Any rom you want as long as it is in the VZW Note 2 threads can be flashed ours arent locked down by what update we are on because our bootloader is unlocked where it isnt on Moto phones. AOSP roms require AOSP kernels as TW roms require TW kernels. The roms come with kernels though so that isnt something tk worry about unless you I want to.
The only thing to remember is if you go to a 4.2 rom and want t I go back to 4.1 you have to flash a downgrade zip so your SD card doesnt become corrupted. You can find the downgrade zip in the Official CM 10.1 thread in the OP.
Check out Droidstyles guide in Android Development, its a sticky, it explains quite a bit and would ne helpful to you I think.
Sent from my SCH-I605 using XDA Premium HD app
Thanks for the info. Exactly the answers and info I was looking for. I just flashed CleanROM and went through the flashing process. When it got to the end and said finish to reboot it just turned off and wouldnt turn back on. Couldn't get to recovery or download mode. I had to pull the battery and then turn it on. It went straight to the new ROM though without a hitch. Is that a normal part of the flashing procedure on the N2? The battery pull I mean, or did I miss something?
Sent from my GT-P3100 using xda app-developers app
mikelikesbikes said:
Thanks for the info. Exactly the answers and info I was looking for. I just flashed CleanROM and went through the flashing process. When it got to the end and said finish to reboot it just turned off and wouldnt turn back on. Couldn't get to recovery or download mode. I had to pull the battery and then turn it on. It went straight to the new ROM though without a hitch. Is that a normal part of the flashing procedure on the N2? The battery pull I mean, or did I miss something?
Sent from my GT-P3100 using xda app-developers app
Click to expand...
Click to collapse
Thats not a normal thing to happen, but it does happen occasionally. As long as it boots up after the battery pull I wouldnt be too worried by it. I have had it happen to me before and after the battery pull I experienced no issues whatsoever.
Sent from my SCH-I605 using XDA Premium HD app
CleanROM's good. It was the first ROM I flashed when I got my Note II too.
Eventually though, you may want to switch to something more feature-rich like Jelly Beans, which is what I'm rocking now. The features it adds are pretty awesome and you get full touchwiz functionality (S-Pen and the like) with the look of AOSP.
DL'ing Jelly Beans now. Gotta make a new TiBu before flashing though. Will give it a go shortly. My wife fusses at me sometimes cause on my old phone (Razr) and on this one I am always flashing different ROMs. She especially hates it when she calls and my phone goes directly to voicemail cause I am in recovery flashing a ROM or kernel.
Sent from my GT-P3100 using xda app-developers app
mikelikesbikes said:
Hi guys, I am very new to the Note 2.
Sent from my GT-P3100 using xda app-developers app
Click to expand...
Click to collapse
Hi all, I'm feeling like a n00b on the Note too, and really appreciate the help all of you seem to be willing to share with each other. I'm not new to modding phones, recently I've been through an S3, DNA, RAZR HD and M, and even another Note 2. I made the mistake of swapping the Note 2 for an iPhone 5, and regretted it about thirty seconds later. Now that's my wife's phone, and due to the grace of another (local) xda member, I'm back rockin' the Note 2. This time around in looking forward to getting into some serious flashing and tweaking to get the most from the hardware. I've decided this is Verizon's best phone at the moment, with everything I need.
Don't worry, you're not alone in having a wife who gets annoyed at flashing and tweaking. Happens to me all the time, but I use the excuse it's one of the few hobbies that I have which doesn't involve the rest of the family and I need a bit of alone time. It kind of works as an excuse until the point where I need to use it again.
I'm looking forward to being part of this community and wanted to say hello.
Sent from my SCH-I605 using xda premium
I like jedi X rom...I got 3 days off my battery with just the right settings...my recommendation is to not mess with the per app dpi for the settings app because now I'm stuck without a settings app and about to switch roms...just about any rom will work as long as it's for your carrier... Best of luck!
Sent from my SCH-I605 using xda premium
mikelikesbikes said:
DL'ing Jelly Beans now. Gotta make a new TiBu before flashing though. Will give it a go shortly. My wife fusses at me sometimes cause on my old phone (Razr) and on this one I am always flashing different ROMs. She especially hates it when she calls and my phone goes directly to voicemail cause I am in recovery flashing a ROM or kernel.
Sent from my GT-P3100 using xda app-developers app
Click to expand...
Click to collapse
Beans is the best! photosphere camera (page 1 of forum) works great with build 16! Check it out! Also, I agree about Jedi: definitely magic battery settings. Enjoy your new hobby! My wife is the same way.