My phone:motorola me600,but I heavily suspect that it's a mb300 as when it has became blue brick(I don't know how you guys call such device in blue screen),I reflashed it with a rom of American(so called AT&T version)
I don't know whether my motorola mobilephone will come to live as it hardly has any respond on the scree either I press the power button or use composite key.
But if I touch the three button below the screen after I have pressed power button ,I can feel it's vibrate.
So now I want to know whether my phone has been an brick and if not how can I do with it?
Thank you very much from freindly china!
Related
Hey guys i have a HTC touch pro and my power button keeps going on and off by itself its almost like its stuck it has nothing to do with the button itself cause i have removed the power button but it seem to still do the same thing the pop up comes up "dou you want to turn off device" it happens like every few seconds so i basicaly cannot not do anything for more than a few seconds then it pops up, also when the phone is off it will switch it back on automaticaly. i have installed the remaping key program it has seemed to make it stop but i have lost all my buttons now only touch screen works when it ask me to add a button press and release iv tried but nothing happens in the pop down it says "none" so if there are anyone that can help me with this it will be most appricated and if there are another way of fixing the power button or other programs please let me know and i will give it ago. Many thanks
200gxi said:
Hey guys i have a HTC touch pro and my power button keeps going on and off by itself its almost like its stuck it has nothing to do with the button itself cause i have removed the power button but it seem to still do the same thing the pop up comes up "dou you want to turn off device" it happens like every few seconds so i basicaly cannot not do anything for more than a few seconds then it pops up, also when the phone is off it will switch it back on automaticaly. i have installed the remaping key program it has seemed to make it stop but i have lost all my buttons now only touch screen works when it ask me to add a button press and release iv tried but nothing happens in the pop down it says "none" so if there are anyone that can help me with this it will be most appricated and if there are another way of fixing the power button or other programs please let me know and i will give it ago. Many thanks
Click to expand...
Click to collapse
It looks like you may have a hardware issue (on the board). Did the phone get wet or damaged in any way?
hey thanks for the reply, the phone just started doing it out the blue HTC has replace the mother board 3 times and the problem still occurs i even removed the power button completely and still no luck!
200gxi said:
hey thanks for the reply, the phone just started doing it out the blue HTC has replace the mother board 3 times and the problem still occurs i even removed the power button completely and still no luck!
Click to expand...
Click to collapse
I know that the hardware starts acting funny if it get wet since the contacts for the buttons can short out. I would get HTC to take another look at it. Also, make sure that you are not damaging the device accidentally by crushing it in your pocket or things of that nature.
I have a bizarre problem with my HD2, which seems to be hardware based ... kind of....
*Sorry if this ends up being really long*
Basically my Volume up and down buttons have stopped working along with the windows button and "back" button.
However, the "home", "call" and "end call" buttons still work, but not properly.
When the phone boots you can briefly see the windows (not HTCSense) volume indicator pop up just before Sense loads, which didnt used to happen.
Once the phone has loaded up only the call, home and end call buttons do anything, they light up the buttons when pressed, and the "home" button does indeed take you "home" and the "end call" button locks the phone and turns off the screen, however, pressing the "call" button doesnt bring up my call list, I have to use a soft key.
I also cannot bring up the hard reset menu, holding the volume keys and booting doesnt do anything, which is why i think its hardware based???
Another interesting problem is that the "up, down, left, right" soft buttons dont work on the keyboard (since this all started)
I had this issue about 6 months ago, I flashed my phone, to no avail .... but about 6 hours after flashing it, it just started working.
The only think I have tweeked on the phone really is installing CHT as I've been booting to Android for the last couple of months, which now I cant do as it hangs after about 5 seconds of booting.
ANY suggestions would be great.
Same problem here I got the phone from craigslist and same problem as above. Can anyone tell as if is hardware or software related problems and if anyone solve this before ?
Any help will be much appreciated.
Sorry I've only just replied, but I ended up having to send mine to HTC, they ended up replacing the main board (apparently). So definately hardware. Sorry bud.
Sent from my HTC HD2 using XDA App
Hi,
When doing a long-press on the power button of my Galaxy SII, after a few seconds, it powers off. This happens whether it is locked or not, and without asking for confirmation on the screen.
I'm using a Sena leather case, which presses on the power button. Each time I put it in the case, it powers off, then it restarts, and stays on "enter SIM pin code" screen. I may have discovered a new way to switch to Airplane mode but I'd like to avoid that.
Moreover, there is a distinction between :
- long press (2 seconds) : brings the power menu (Airplane / Reboot / Switch OFF)
- very long press (approx. 8 seconds) : switches the phone OFF
Also, these two keys are active even when the phone is locked.
Here's what I would like to do : disable both the 2 seconds press and the 8-seconds press when the phone is locked
I found some threads about key remapping applications or direct edit of keymap files, but none of them were successful.
Could someone point me out an application / a way to achieve that ? Does someone know if it's ever possible ?
(For now, the only workaround I found is a hardware one : disassemble the phone and sand the power button to reduce its height, so that it stays inside the casing)
Thank you in advance. Kind regards
My old HTC Hero used to do that too, which leads me to believe it is something hard-coded into Android itself. I'd suggest there is nothing much you can do, but wait and see if a dev replies or something.
Sent from my GT-I9100 using XDA
I don't know if it's possible but if it is it has to be something in the kernel.
The 8 second power off function works the same way as the on on your PC and is used if your phone stops responding so I don't see a way to disable it with an app because it's ment to turn the phone off even if an app freezes your whole phone.
Hi,
If the 8-seconds press is hard-coded, I think precautions should have been taken to avoid unwanted power off each time you put the phone into a leather pouch !
On iPhone f/ex, you have to press both power and home button during several seconds to trigger hard reboot, which makes unwanted action hard to happen unexpectedly.
It's always frustrating to encounter such a basic problems on a $600 phone using the latest state-of-the-art technology, which powers off each time you put it into your pocket ;-)
I hoped some developer has found a way to workaround this. I googled a lot, but I didn't find anything.
So, if the power button features are hard-coded, the only solution may be to hard-remove the entire power button
Problem solved.
I disassembled the phone, I removed the power button, I carefully grinded it to reduce its height, and I put it back into the phone.
(For those who may already owned an iThing, disassembling a Galaxy SII is very easy, it's a matter of seconds with a good old mini-screwdriver; proceed carefully when grinding, because if you reduce the height too much, the buttom may break)
Now my power button height is just below the casing. It's still possible to press on it with a finger, but it does not press by itself when putting the phone into my leather pouch.
Thank you for explaining it I had an issue with my S II and it went to service to solve it, they totally changed the board and was shocked when I found the short press on power button doesn't show the power menu I used to have and it switched off immediately!
I've got to return it to service and your post made me thinking it's a simple issue! It won't take time
Regards,
Hey guys, so basically when I am locking my phone with the power button it locks and the phone will then wake up like .5s after the screen turns off and is locked. I start with my phone unlocked and it does everything correct except it wakes the screen after it is locked. I am running stock standard MIUI Global, no root or anything special. I have tested this to no end to make sure I am not double tapping the button and I am not holding it down or anything. Any thoughts as to what it might be?
What version MIUI global rom you're using it..?, is it official or mod/ custom version..?
You can try flashing latest global fastboot rom..with MiFlash Tool (Clean All method)..then see if that issue still apear..
This does happen to me too once in a while. Same as you, stock, MIUI 8.0.5.0. i suspect that "Wake with volume keys" option does this. You have this option ON?
mine does this. The power button seems to be a bit loose. Press it a bit harder and see what happens.
This is hardware problem, it happened to me too. You probably (like i did) at some point pressed and held power button really hard. I fixed it by opening phone and realigning power button contact plate. Fortunately, i did not break it so it was quick & easy fix.
Just open your phone, disconnect battery and buttons flex cable, remove tape from power button and realign plate a little to one side. I noticed that my power button did not react if i pressed it at bottom side (i heard mechanical click but screen did not turn on/off), at middle (normal press) and at top it reacted but most times it was like as if i pressed it twice really fast so screen turned on/off fast. So thats why i pushed plate a little to bottom where button did not react, now it works perfectly no matter how i push button - just like it did on first day when i bought this phone.
Is there any software or commands I could use to diagnose my phone over USB? The screen is black, even during boot (no logos), but the phone is still working in the background. The notification LED blinks normally, menu and back button lights up when pressed, and it even rings when someone calls, though I can't see who it is b/c of the black screen. The screen is not cracked or damaged, and I didn't drop it, so not sure why this is happening. I want to test the GPU or other components before I put down a lot of money for a new screen and it no resolve the issue.
Phone is a rooted SM-N910V that has been working great for 3 months.
Thank you!
Modify_inc said:
Is there any software or commands I could use to diagnose my phone over USB? The screen is black, even during boot (no logos), but the phone is still working in the background. The notification LED blinks normally, menu and back button lights up when pressed, and it even rings when someone calls, though I can't see who it is b/c of the black screen. The screen is not cracked or damaged, and I didn't drop it, so not sure why this is happening. I want to test the GPU or other components before I put down a lot of money for a new screen and it no resolve the issue.
Phone is a rooted SM-N910V that has been working great for 3 months.
Thank you!
Click to expand...
Click to collapse
Hi , try with key kombination .
1. Make sure your phone is OFF
2.Now Press toghether Vol + and power button and hold like that until second vibration (reboot)
3. If that doesn't work try with another combination .
Vol - and Power button
Vol + & Home button & Power button for about 10 second
Vol - & Home button & Power button for about 10 second
Good Luck
Teddy Lo said:
Hi , try with key kombination .
1. Make sure your phone is OFF
2.Now Press toghether Vol + and power button and hold like that until second vibration (reboot)
3. If that doesn't work try with another combination .
Vol - and Power button
Vol + & Home button & Power button for about 10 second
Vol - & Home button & Power button for about 10 second
Good Luck
Click to expand...
Click to collapse
Thanks for the suggestions, though I have already tried all those plus other things.
I've left the battery out for over a day, removed sim card, held power button in to drain any residue power.
I'm lost as to why all of sudden the black screen. Hoping there's a way to test the phone to confirm if its the lcd or something else like the gpu chip. On a laptop you could plug a monitor in the vga port, don't guess phones have this option
Sent from my SAMSUNG-SGH-I337 using Tapatalk
Modify_inc said:
Thanks for the suggestions, though I have already tried all those plus other things.
I've left the battery out for over a day, removed sim card, held power button in to drain any residue power.
I'm lost as to why all of sudden the black screen. Hoping there's a way to test the phone to confirm if its the lcd or something else like the gpu chip. On a laptop you could plug a monitor in the vga port, don't guess phones have this option
Sent from my SAMSUNG-SGH-I337 using Tapatalk
Click to expand...
Click to collapse
I read that the phone was rooted so maybe that custom rom has some bug and that way you get black screen .
Try to flash him back to stock firmware and see if the problem is solved .
It is just rooted on the standard firmware, I didn't install any custom firmwares. But I was wondering if I could possibly reflash it from a backup I made with twrp. I cant get to recovery, well actually I could if I new the exact steps since everything works, I just cant see crap.
Is this even possible or is there another way to access twrp over the usb?
Sent from my [device_name] using XDA-Developers Legacy app