I want to start reading some books on my tablet, but due to the large size and small bezel it's awkward to use. Any recommendations for a case with a handle or strap to make things easier?
I haven't seen any cases with built in straps, but something like this might work for you:
http://www.amazon.com/Padlette-in-Black/dp/B004DLUZ4I/ref=pd_sim_e_2
I haven't used it myself, but it looks like it could be an easy way to hold the Prime, as you can just slide your hand under the strap. It should also be able to stretch over any folio case you might choose to use.
I use the Sikai microfiber case, and while it doesn't have a strap I find that its soft grippy texture makes it much easier to hold the Prime for extended periods. It also offers excellent protection for the tablet.
http://www.amazon.com/Sikai-Microfi...1?s=electronics&ie=UTF8&qid=1339617190&sr=1-1
That looks interesting, but $20 for a elastic band seems kind of ridiculous to me. If I can't find anything better though I may give it a shot.
Mine just came in today, so I cannot pass full judgement but so far so good.
http://www.amazon.com/rooCASE-Slim-Fit-Adjustable-Transformer-10-1-Inch/dp/B0079MAUNE
Something like this?
http://www.censuspc.com/product-pr-12059.html
Disregard.
richardmkovach said:
Mine just came in today, so I cannot pass full judgement but so far so good.
http://www.amazon.com/rooCASE-Slim-Fit-Adjustable-Transformer-10-1-Inch/dp/B0079MAUNE
Click to expand...
Click to collapse
thats the one i'm currently using
overall the case is pretty good but if you put it on a unleveled surface, the stand won't stand very well as the tablet doesn't sit in the nudge very well
other then that i have no complaints about it
been using it for about a month or so now
Related
I've been looking for a solution that would offer an easier way to hold the TF with one hand and still allow full 360 rotation. I came across these two on Amazon and I was wondering if anyone here has tried them. Here's the quick pros & cons that I can see:
Hand-e-holder: http://amzn.to/jQ5jzc
+ Hold with one hand / 360 rotation
+ Comfortable wide neoprene backing for your hand
+ Size doesn't matter Uses an adhesive disc to mount one side of the holder to the back of your tablet - so it should work with any tablet out there
- I see the adhesive as a con also - not sure I want to stick anything on the back of my TF. Plus, once it's stuck on there it's semi-permanent in that you can't take it off one day and then stick it back on the next (you'll need to buy a new disc for $6)
- Price is kinda high IMO at $40
Video (47 seconds in): http://video.foxnews.com/v/966135816001/gadget-gift-guide-for-dads/
HeloStrap: http://amzn.to/jKnO39
+ Hold with one hand / 360 rotation
+ Comes in multiple colors (red, green, blue, black)
+ Price: Only $25, so $15 cheaper than the Hand-e-holder above
+ Attaches to your tablet via elastic bands or grips so you can easily attach or remove it. Also will work while your table is in a sleeve.
- "Officially" only supports ipad, ipad2, & Xoom. I did a comparison and while the TF is longer on one side, it's shorter on the other. So I jumped into my wayback machine (and google) to figure out the "hypotenuse" and it looks like the TF is ~20mm longer. From what *I* can see of the HeloStrap in the images it certainly looks like the elasticity could accommodate that extra 20mm.
- The part of the HeloStrap that your hand fits into doesn't look as comfortable as the Hand-e-holder. Actually, that was the only con mentioned for it on the Amazon reviews - that it could be a tad more comfortable. But it also wasn't bad enough for folks to warrant it any less than 4 stars.
Video: http://www.youtube.com/watch?v=IpZ4-pdq3ag
I put in an order for the HeloStrap (black) because I like that I can pop it on and off easily - with or without my TF in the sleeve. I'll post back here when it shows up and let folks know how it works out.
I'd still like to hear from anyone else that's tried one of these - OR that has found another option that allows for the 360 rotation.
Please post up how you like it when you get it.
I smell a broken Transformer...
frosty5689 said:
I smell a broken Transformer...
Click to expand...
Click to collapse
LOL
Ya thing so?? Why? The HeloStrap seems to hold fine on the iPads - and it will be a bit more snug on the TF.
Even on the other one, the adhesive seems pretty tight.
I'm not going to be doing any BMXing with it - I'm just looking for easier one-handed holding while couch surfing and swyping with the other..
Unfortunately neither one was Amazon Prime so it may take a several days to get here. Hopefully before the weekend though and I'll be sure to report back!
Never even knew anything like these existed. Of the two I like the HeloStrap more... really tempted to buy one, but I've wasted too much money lately so ill wait for a review.
pogul said:
I'm not going to be doing any BMXing with it - I'm just looking for easier one-handed holding while couch surfing and swyping with the other..
Click to expand...
Click to collapse
Exactly. Worst case scenario for me would be it falls onto me lol.
Hmmmm...imagine what happens when one swipes at some annoying flying bug....methinks major fail?
Unique but pass.
I look forward to impressions
skeeterpro said:
Hmmmm...imagine what happens when one swipes at some annoying flying bug....methinks major fail?
Unique but pass.
Click to expand...
Click to collapse
What? You'd likely shatter your pad doing that no matter what.
I went a similar but slightly different route with the Padlette (padlette.com) which I bought off of Amazon. It's not as fancy as the other options, but it's pretty heavy duty and I have little to no fear about it breaking or slipping off. You can either hold it in one hand or you can slip you hand in behind.
In either case, an option worth looking at.
How comfortable is the padlette on your hand? Does it feel tight after an hour or two holding the Transformer? Is it equally comfortable in portrait and landscape? Also, how is the fit on the tablet?
Also, a question about the Helo, Do the straps at the corners mark/scratch the tablet trim or screen?
Excellent FIND...and I think I am tending towards ordering one too....
I will do more research as well and keep you'al updated...
Good luck with yours.
Regards,
Misfitz
nv88 said:
How comfortable is the padlette on your hand? Does it feel tight after an hour or two holding the Transformer? Is it equally comfortable in portrait and landscape? Also, how is the fit on the tablet?
Click to expand...
Click to collapse
I find it very comfortable. I was participating in an event this weekend that required that I hold the pad for roughly four hours and I did so with no problems. You can either grab it with your fingers (my preferred method) by hooking them around the straps, or you can simply slide your hand in behind.
Because it's at the same angle in either portrait or landscape it's equally easy to hold it in either configuration. I also like that it's removable without leaving any evidence that it was there. The only (minor) problem I've seen is that I have to have it oriented in SW to NE because in the NW to SE direction it covers up the volume rocker.
Thanks. I'm very interested in the padlette... sounds like it may be worth $20.
Sorry for the delay in following-up. I wanted to put a short video up, but my Sony Vegas just hasn't been cooperating with me.
I received the HeloStrap last Thursday and finally had a chance to play with it last night.
Overall, I think it's great. I definitely agree with the 4/5 stars rating on Amazon. The only con being that the hand part of the strap could have been more comfortable. It's not horrible by any means. You just notice it when you first start using it, but then quickly forget about it.
It still looks like the Hand-e-holder would win in the comfort category, BUT - I prefer the HeloStrap because of the lower price and the fact that I can slip it on or off easily vs having to semi-permanently stick the Hand-e-holder on. If I didn't have the Asus sleeve for my TF that probably wouldn't be as much of a factor.
BTW, the HeloStrap gives a nice snug fit on the Transformer with or without the sleeve. It's snug, but not so tight that it would be a concern (this is what I wanted to show in the video). It definitely feels very secure - I don't see the TF "falling out" of it or anything.
It certainly made the couch surfing MUCH more enjoyable last night which was my primary goal!
If I didn't have the sleeve I would be much more tempted to try out the Hand-e-holder, but the HeloStrap is the one that gives me the option of using it easily with the sleeve or without. Now i just need to see if my wife can come up with some idea for making the hand part a lil cushier!
I'll take another crack and getting a video together and will post that as soon as I can.
I finally got around to shooting a quick video of the HeloStrap on my TF. Hopefully this will give you an idea of how it fits - with and without the sleeve.
http://sleeve360.com/
This looks great; wonder if it would fit the Transformer.
lost101 said:
http://sleeve360.com/
This looks great; wonder if it would fit the Transformer.
Click to expand...
Click to collapse
Not sure, but given that it's a full sleeve/case made to fit the ipad, I don't think it would work for the TF. The dimensions are too different.
The HeloStrap just needs to stretch diagonally from one corner to another - whereas that sleeve360 would have to fit all 4 corners.
Let us know if you give it a shot though!
That extra tension on the corners of my Transformer would amplify the screen bleed issue I'm having by 200%. Looks cool though.
Sent from my Transformer TF101 using Tapatalk
Know what - I think you can stick this to the outer part of your folio and use it. So that the TF remains pristine.
Even better - with the Techtree stand, you can create your own 360 degree rotating hand holder.
I just found this on amazon and bought one for myself. Looks like it will hold the Transformer and Dock perfectly.
http://www.amazon.com/CaseCrown-Che...EM/ref=sr_1_59?ie=UTF8&qid=1316128965&sr=8-59
Only $0.01 with $4.99 Shipping (3-5 days)
Dont know how long the price is good for, better get one quick!
edit: It sure looks like polyurethane, but I guess their description says it has a "canvas like" stylish exterior. Not PU Leather like i assumed.
Update: Just got it in the mail. Took about a week or so, not too bad. However I can't say the same for the case. In my opinion its total crap.
The material on the outside of the case is anyones guess. It looks and feels like a combination of canvas and polyurethane faux leather. The whole thing is monstrous, measuring in at 12" wide x 11" long x 1" thick (when compressed and empty) You can only fit the Transformer in the case in one direction because of the velcro placement. Once you get your tablet inside the case it does feel like it would be very safe. The extra 2-3 inches of fabric hanging from either side of the device adds some extra protection but also makes the whole thing absurdly large. And to top it off the whole thing smells very strongly of DRY ERASE MARKERS!
All said and done 5 bucks was overpaying for this. They probably have them marked so low because nobody buys them. But if you absolutely need a case and your local Value Village Thrift doesnt have something better, give it a try. Just make sure to wash it first.
P.S. Im not going to bother putting up any pictures unless you guys really want them. Im hoping to pawn this thing off on one of my brothers if I'm lucky.
Pretty cheap, but it kinda ugly and seems like it would be a hassle getting you tablet in and out.
Are those flaps supposed to hold papers or something? I'm trying to imagine bringing my tablet into the office and trying to "unpack" it from that case. Seems a little bulky from the pictures.
What holds it closed? I don't get it? A magnet? It does seem ugly and might an indication why it's so cheap.
Tubular said:
What holds it closed? I don't get it? A magnet? It does seem ugly and might an indication why it's so cheap.
Click to expand...
Click to collapse
Looks like a closer look at one of the pics reveals the answer: Velcro. I thought they were pockets for papers or something but they are strips of velcro, which must be what holds it shut.
Looks like a decent case for travel and storage.
No affiliation with them, just really pleased with this case. It's a little snug, but looks and works amazing.
I ended up buying two of them. ;-)
http://www.lightwedge.com/Shop/Kindle-Fire/Verso-Prologue-Antique-Cover-Size-E-Tan
http://www.lightwedge.com/Shop/Kindle-Fire/Verso-Prologue-Antique-Cover-Size-E-Red
Wish they made one that would fit a 8.9 tablet!
It doesn't look like it can support the tab in viewing mode. It looks kind of nifty if you like that kind of look, but otherwise is limited as a case.
True, if you want to set it on a desk or table this is not the case for you.
My dock at home takes care of that for me.
This case lets me put it in my bag fairly protected, and yeah I really like the style. I can feel all sophisticated while I play Angry Birds.
Interesting! I'm also using a Verso (Kindle Fire) case for my 7.7. Gorgeous case and fits surprisingly well.
http://www.amazon.com/Verso-Artist-...UG/ref=sr_1_12?ie=UTF8&qid=1337310238&sr=8-12
You should post a picture of the tab in it...
Yes, please post pictures. $40 is a bit much to take on just word.
After doing some online research about this case I decided to give it a try.
I had this cover on for a few weeks and was overly pleased on how it looked and felt. It is indeed a tight fit. You have it squeeze the tab into the strap, very carefully. The top right strap will press down on the power button so you have to be careful there.
I had more than a few people comment on it. It is very stylish, functional and it does not look like you are carrying around an electronic device, especially something as expensive as our tablet.
I did not have any issues other people are claiming with this case. It fits very well with our tablet. It lies flat so the top does not bulge out. That was my main concern about the case.
HOWEVER, this is a huge one, the inside pocket where you can either store documents or use it as a handle, caused an indentation on my screen - a burn-in mark. I did not notice it until I changed my lockscreen to a white/light background.
I then noticed it whenever I had a non dark background in that section. I ran a screen test and sure enough, there is the burn-in outline of where the inside pocket forms.
I took a picture, hopefully it will come out clearly.
So beware if you are going to purchase this case. If it wasn't for the burn-in, I would have highly recommended it.
Wow, thanks for the warning. I double checked my tablet and I don't see that mark but I might see if I can use something to remove that extra pocket since I don't use it.
I have been using the official Samsung 7.7 book cover case since I got a good deal on it. Didn't know how nice of a case that is!
Like the look but not a fan of the flip case with no zipper. I can just use the sleeve in that case. Got myself a brookstone case. Love it.
Got an N6 on the way, looking for a flip case that can easily be removed. I'd like to be able to clip the phone into the case when I'm out and about, but remove it when I'm at home or at the office. Anyone have a case like this? I've done some looking but it seems like most of them are TPU cases attached to the flip cover. For my other phone I found one that clipped around the edges in only a couple of spots. I'm hoping to find something similar or at least one that can stand up to the abuse of many in/out cycles.
Might give this one a shot. It's a bit bigger than some other cases but it feels pretty nice. I will warn you though, while not a huge issue, the edges on the flip cover started to look a little frayed after a few weeks. Probably just wear and tear though.
http://www.case-mate.com/collection...cases/products/black-nexus-6-stand-folio-case
Naked Sam said:
Might give this one a shot. It's a bit bigger than some other cases but it feels pretty nice. I will warn you though, while not a huge issue, the edges on the flip cover started to look a little frayed after a few weeks. Probably just wear and tear though.
http://www.case-mate.com/collection...cases/products/black-nexus-6-stand-folio-case
Click to expand...
Click to collapse
Do you experience any of the button issues that the amazon reviewers had?
http://www.amazon.com/Case-Mate-Google-Nexus-Stand-Folio/dp/B00PIOTZ04
Not particularly, no. I will say they are not the best though. Theres a little bit of play to them. If you can get it cheaper than the 30-some odd dollars they charge, I'd go for it. Personally I usually carry my nexus 6 w/o a case just due to how nice it feels, although if you find a thinner, rubberized flip case let me know.
All in all, I'd give the casemate a shot. Does the job just fine.
I know you might have your reasons for wanting a flip case, but because I wanted to do the same as you (protection when out and about but naked when at home) I went with a really nice larger pouch case instead.
https://www.amazon.com/gp/aw/d/B015HD74YO/ref=ya_aw_oh_bia_dp?ie=UTF8&psc=1
Sent from my Nexus 6 using Tapatalk
Thanks for the help guys. I considered the case-mate, especially since it was originally sold on Google play so it's close to "official"/oem but the multitude of bad reviews scared me off. I like the pouch idea too but I like to have some protection when I'm using the phone on the go since that's the most likely time I'd drop it. I only remove the case when I'm home or at the office since I'll be at the table/couch/desk there's less risk of dropping it and I prefer using the phone naked as much as possible.
I ended up finding one of these in eBay for 25 and it seems to work well, although it isn't as easy to remove as the flip case for my last phone. I haven't used the card slots yet as I'm a little concerned they could scratch the screen and I don't want to use a screen protector.
http://www.amazon.com/Genuine-Motor..._1_2?s=wireless&ie=UTF8&qid=1448630683&sr=1-2
Sent from my Nexus 6 using XDA Free mobile app
bchaney16 said:
Thanks for the help guys. I considered the case-mate, especially since it was originally sold on Google play so it's close to "official"/oem but the multitude of bad reviews scared me off. I like the pouch idea too but I like to have some protection when I'm using the phone on the go since that's the most likely time I'd drop it. I only remove the case when I'm home or at the office since I'll be at the table/couch/desk there's less risk of dropping it and I prefer using the phone naked as much as possible.
I ended up finding one of these in eBay for 25 and it seems to work well, although it isn't as easy to remove as the flip case for my last phone. I haven't used the card slots yet as I'm a little concerned they could scratch the screen and I don't want to use a screen protector.
http://www.amazon.com/Genuine-Motor..._1_2?s=wireless&ie=UTF8&qid=1448630683&sr=1-2
Sent from my Nexus 6 using XDA Free mobile app
Click to expand...
Click to collapse
I've been using this inexpensive but very form-fitting case since I bought the n6. Easy to slip it out of the case, and I've used nillkin book-type cases for multiple phones. They usually last the life the phone (for me, that's about 2 years)
http://www.amazon.com/gp/aw/d/B00RJ..._SL500_SR100,100_&refRID=0G25GYGXGH6EY90F8YAQ
bchaney16 said:
Thanks for the help guys. I considered the case-mate, especially since it was originally sold on Google play so it's close to "official"/oem but the multitude of bad reviews scared me off. I like the pouch idea too but I like to have some protection when I'm using the phone on the go since that's the most likely time I'd drop it. I only remove the case when I'm home or at the office since I'll be at the table/couch/desk there's less risk of dropping it and I prefer using the phone naked as much as possible.
I ended up finding one of these in eBay for 25 and it seems to work well, although it isn't as easy to remove as the flip case for my last phone. I haven't used the card slots yet as I'm a little concerned they could scratch the screen and I don't want to use a screen protector.
http://www.amazon.com/Genuine-Motor..._1_2?s=wireless&ie=UTF8&qid=1448630683&sr=1-2
Sent from my Nexus 6 using XDA Free mobile app
Click to expand...
Click to collapse
This is the one I use, and definitely have enjoyed it. I haven't had any problem with cards scratching the screen yet.
If you're still looking for a wallet themed case, you can try out this one by VENA, I have had it for 2 months and it's been great.
http://www.amazon.com/Google-Nexus-...8&qid=1449112949&sr=1-4&keywords=vena+nexus+6
I like my phones naked or as close as it comes (ultra thin transparent tpu case), but I also like to have something to put it in when out and about. My Nexus 5 was kept in a Mofi Kangaroo pouch case which was great. Unfortunately, they seemed to have stopped making them and only ever made them just about big enough for the N5. There are similar alternatives but none seem as good as the Mofi.
So, finding a removable pouch type case big enough for this beast is a challenge! I ordered a hand made fabric one from etsy which is well made, but at the size of the device, looks more like a small sleeping bag than the home of a sleek Nexus device .
So I took a bit of a gamble and ordered something not designed for the Nexus 6. Its primary advertising is for the Iphone 6+, but also states is suitable for Note 4. Looking at both devices dimensions, I concluded it was almost big enough. The Nexus being little longer, thicker and wider than both devices, but not much.
It seems to have paid off. Its a very nice luxurious pouch wallet case in genuine brown leather from what I gather is a brand owned by tuffluv. You can't tell from the site, but the phone pouch part on the side, top and bottom is elasticated so happily accommodates the Nexus's superior girth!
I can even squeeze it in with tpu case - just, but its a bit tough to pull out. Might have to seek an ultra thin tpu case - any recommendations? Without the TPU, its next to perfect! Fully loaded with cards in the card slots makes it slightly tighter to close fully, but still very acceptable in my book.
Currently its in the sale on Tuffluv site where its claimed to be a £50 case (and going by the other similar cases going for in excess of £50, I believe them!). With the sale price and discount it came to £17.99 delivered.
Just thought I'd share in case anyone else was looking for something similar but hadn't found anything labelled as suitable for the Nexus 6.
Can't paste a link but go to tuff-luv dot coms site and search for "Alston Craig Vintage Genuine Leather Wallet Case Cover Pouch for Apple iPhone 6 Plus / 6s Plus / Samsung Galaxy Note 4 - Brown"
Alston Craig have their own site, but there is a discount code for a couple of quid off on tuff-luv
Hope this helps someone.
Oh, ps, there is a small slip of paper in the packaging that states you should have a screen protector fitted to protect the screen before use. Its material lined; not the soft microfibre type, but not something I would be concerned about.
pps. Only issue I've found is the elastic straps are centred, so covers headphone and usb port. Shame, not a deal breaker for me.
Put in my pre order but that's a lot of glass with the 2 screens and folded back is my plan if there is no peek feature for notifications...
Hearing its shipping with a bumper in white but has any seen any ideas on cases.
That's an expensive phone and 100% different form size to get used to...seeing dropping it as easy till you get use to it.
I have been thinking about the same thing, I think it kind of depends on how you want to carry your Duo. I think there will be some challenges because many common case options will either mess with the aesthetics of the Duo or Cause problems with the folding action of the device.
Some options may be:
-There are Skins available that will protect it from case scratching.
-There are glass protectors that can be applied to the screens. (Possibly the external panels but I am not certain on that one)
-There is a type of belt clip that reminds me of the old Blackberry holsters (By Kensington)
-There are generic belt holsters that will likely work.
-There are also belt pouches that could be used to carry the Duo with some accessories (that will likely be a bit much for most people tho)
Cheers,
BR
It's definitely going to be difficult to completely protect. I'm curious as to how well the bumper adhesive will hold up to day after day of pulling it out and putting it back in pockets. It looks like the lip of the bumper would be prone to catching or grabbing pocket seams or other rough materials.
scienceguylabs said:
It's definitely going to be difficult to completely protect. I'm curious as to how well the bumper adhesive will hold up to day after day of pulling it out and putting it back in pockets. It looks like the lip of the bumper would be prone to catching or grabbing pocket seams or other rough materials.
Click to expand...
Click to collapse
Same here, I have been considering case options, I don't want it too snug so the case does not stress the bumpers and cause them to fall off. I like to have something that protects, allows easy carry with good access. I don't want something too big that will be cumbersome. A fine line between too little and too much
Cheers,
BR
Belt Holster Case for Microsoft Surface Duo https://store.kensington.com/products/belt-holster-for-microsoft-surface-duo
Might get this myself
Looks like Dbrand for now...but the youtubes of people trying the demo models at Best Buy and Att are not looking good. Each one has super sketchy software that is not working!
T&C said:
Looks like Dbrand for now...but the youtubes of people trying the demo models at Best Buy and Att are not looking good. Each one has super sketchy software that is not working!
Click to expand...
Click to collapse
I am pretty sure that is retail demo mode. Because i went to best buy and they let me use it before they put it in demo mode and it was smooth as butter. tested it after demo mode and it was horrible.
Went to an At&t store today and got to spend about a hour with it...the phone was really nice, crazy thin but its just super awkward to text and type.
The the keyboard is wide enough that you have to use 2 hands and just couldn't get comfortable.
I would download swiftkey because lots of mistakes typing with the standard keyboard.
Camara was average quality and even running two apps, youtube and email it just was hard to type and hold the phone in book mode and feel comfortable.
I did put the bumper and zero protection. I see a lot of people dropping this phone.
I think for the cost I'm going to wait it out and see what the reviewers and influencers say...Coming from a 5g phone its going to be hard to take a step backwards.
Interested to see what you all think once you get it in hand.
T&C said:
Went to an At&t store today and got to spend about a hour with it...the phone was really nice, crazy thin but its just super awkward to text and type.
The the keyboard is wide enough that you have to use 2 hands and just couldn't get comfortable.
I would download swiftkey because lots of mistakes typing with the standard keyboard.
Camara was average quality and even running two apps, youtube and email it just was hard to type and hold the phone in book mode and feel comfortable.
I did but on the bumper and zero protection. I see a lot of people dropping this phone.
I think for the cost I'm going to wait it out and see what the reviewers and influencers say...Coming from a 5g phone its going to be hard to take a step backwards.
Interested to see what you all think once you get it in hand.
Click to expand...
Click to collapse
its funny. Microsoft using Swiftkey as a default keyboard
avetny said:
its funny. Microsoft using Swiftkey as a default keyboard
Click to expand...
Click to collapse
Didnt look swiftkey for the stock keyboard and didnt see any adjustment in the keyboard size also and or the number row?
T&C said:
Didnt look swiftkey for the stock keyboard and didnt see any adjustment in the keyboard size also and or the number row?
Click to expand...
Click to collapse
It is Swiftkey, (shows in the specs) that said, If I recall, there is some customization that makes it act certain ways in certain situations.
Cheers,
BR
The bumpers are lint magnets. Not sure how long I will be keeping them on
I don't think they are going to offer any protection anyway...
It will be interesting to see in a few weeks the post of people dropping these and the outcome!
This does not look to offer total protection, bit I dig the folio style and functionality.
https://www.bestbuy.com/site/otterb...oft-surface-duo-black/6422085.p?skuId=6422085
https://www.otterbox.com/en-us/surf...aaa—&cjevent=c0134510f5d311ea80ba02690a240612
2 versions here
Try some of the Nintendo DS Carry cases that are still around. It has virtually the same form factor and I can confirm the Duo fits snugly inside of them.
---------- Post added at 01:41 PM ---------- Previous post was at 01:40 PM ----------
Bandage said:
This does not look to offer total protection, bit I dig the folio style and functionality.
https://www.bestbuy.com/site/otterb...oft-surface-duo-black/6422085.p?skuId=6422085
Click to expand...
Click to collapse
I got this case for two reasons: 1 ) I drop everything. Repeatedly. 2) I'm not using my Duo as a phone. In fact I turned the ringer off so spam calls don't bother me.
It's a high quality case as you'd expect from Otterbox, but it does work by sticking the Duo to it with adhesive, so you can't remove it. With the case on, you cannot fold the Duo completely around into "phone mode" so if you do plan to use it as a phone, do NOT get this case. The other annoying bit, when I do fold it around most of the way, the duo turns off the right side screen instead of the left that's now buried in the case, so you either have to do the "double tap" to swap screens, or just don't do that.
Also, the pen slot is REALLY tight on this case. Tight enough I put my 2nd gen surface pen in it and it pulled the pen apart trying to get it back out. I bought the slim pen (hate it) and it works much better there because there's not a back cap to pull off. I think over time it'll slide out easier as the elastic stretches.
It reminds me of when I did sales back in the early 90's and carried a dayplanner everywhere. That's essentially what your Duo becomes with this case - a digital dayplanner.
It's hard to play games on it due to the folding issue and how much weight the case adds to the device. All in all, I'm very pleased with the case, but I think a lot of people won't be due to those limitations.