Put in my pre order but that's a lot of glass with the 2 screens and folded back is my plan if there is no peek feature for notifications...
Hearing its shipping with a bumper in white but has any seen any ideas on cases.
That's an expensive phone and 100% different form size to get used to...seeing dropping it as easy till you get use to it.
I have been thinking about the same thing, I think it kind of depends on how you want to carry your Duo. I think there will be some challenges because many common case options will either mess with the aesthetics of the Duo or Cause problems with the folding action of the device.
Some options may be:
-There are Skins available that will protect it from case scratching.
-There are glass protectors that can be applied to the screens. (Possibly the external panels but I am not certain on that one)
-There is a type of belt clip that reminds me of the old Blackberry holsters (By Kensington)
-There are generic belt holsters that will likely work.
-There are also belt pouches that could be used to carry the Duo with some accessories (that will likely be a bit much for most people tho)
Cheers,
BR
It's definitely going to be difficult to completely protect. I'm curious as to how well the bumper adhesive will hold up to day after day of pulling it out and putting it back in pockets. It looks like the lip of the bumper would be prone to catching or grabbing pocket seams or other rough materials.
scienceguylabs said:
It's definitely going to be difficult to completely protect. I'm curious as to how well the bumper adhesive will hold up to day after day of pulling it out and putting it back in pockets. It looks like the lip of the bumper would be prone to catching or grabbing pocket seams or other rough materials.
Click to expand...
Click to collapse
Same here, I have been considering case options, I don't want it too snug so the case does not stress the bumpers and cause them to fall off. I like to have something that protects, allows easy carry with good access. I don't want something too big that will be cumbersome. A fine line between too little and too much
Cheers,
BR
Belt Holster Case for Microsoft Surface Duo https://store.kensington.com/products/belt-holster-for-microsoft-surface-duo
Might get this myself
Looks like Dbrand for now...but the youtubes of people trying the demo models at Best Buy and Att are not looking good. Each one has super sketchy software that is not working!
T&C said:
Looks like Dbrand for now...but the youtubes of people trying the demo models at Best Buy and Att are not looking good. Each one has super sketchy software that is not working!
Click to expand...
Click to collapse
I am pretty sure that is retail demo mode. Because i went to best buy and they let me use it before they put it in demo mode and it was smooth as butter. tested it after demo mode and it was horrible.
Went to an At&t store today and got to spend about a hour with it...the phone was really nice, crazy thin but its just super awkward to text and type.
The the keyboard is wide enough that you have to use 2 hands and just couldn't get comfortable.
I would download swiftkey because lots of mistakes typing with the standard keyboard.
Camara was average quality and even running two apps, youtube and email it just was hard to type and hold the phone in book mode and feel comfortable.
I did put the bumper and zero protection. I see a lot of people dropping this phone.
I think for the cost I'm going to wait it out and see what the reviewers and influencers say...Coming from a 5g phone its going to be hard to take a step backwards.
Interested to see what you all think once you get it in hand.
T&C said:
Went to an At&t store today and got to spend about a hour with it...the phone was really nice, crazy thin but its just super awkward to text and type.
The the keyboard is wide enough that you have to use 2 hands and just couldn't get comfortable.
I would download swiftkey because lots of mistakes typing with the standard keyboard.
Camara was average quality and even running two apps, youtube and email it just was hard to type and hold the phone in book mode and feel comfortable.
I did but on the bumper and zero protection. I see a lot of people dropping this phone.
I think for the cost I'm going to wait it out and see what the reviewers and influencers say...Coming from a 5g phone its going to be hard to take a step backwards.
Interested to see what you all think once you get it in hand.
Click to expand...
Click to collapse
its funny. Microsoft using Swiftkey as a default keyboard
avetny said:
its funny. Microsoft using Swiftkey as a default keyboard
Click to expand...
Click to collapse
Didnt look swiftkey for the stock keyboard and didnt see any adjustment in the keyboard size also and or the number row?
T&C said:
Didnt look swiftkey for the stock keyboard and didnt see any adjustment in the keyboard size also and or the number row?
Click to expand...
Click to collapse
It is Swiftkey, (shows in the specs) that said, If I recall, there is some customization that makes it act certain ways in certain situations.
Cheers,
BR
The bumpers are lint magnets. Not sure how long I will be keeping them on
I don't think they are going to offer any protection anyway...
It will be interesting to see in a few weeks the post of people dropping these and the outcome!
This does not look to offer total protection, bit I dig the folio style and functionality.
https://www.bestbuy.com/site/otterb...oft-surface-duo-black/6422085.p?skuId=6422085
https://www.otterbox.com/en-us/surf...aaa—&cjevent=c0134510f5d311ea80ba02690a240612
2 versions here
Try some of the Nintendo DS Carry cases that are still around. It has virtually the same form factor and I can confirm the Duo fits snugly inside of them.
---------- Post added at 01:41 PM ---------- Previous post was at 01:40 PM ----------
Bandage said:
This does not look to offer total protection, bit I dig the folio style and functionality.
https://www.bestbuy.com/site/otterb...oft-surface-duo-black/6422085.p?skuId=6422085
Click to expand...
Click to collapse
I got this case for two reasons: 1 ) I drop everything. Repeatedly. 2) I'm not using my Duo as a phone. In fact I turned the ringer off so spam calls don't bother me.
It's a high quality case as you'd expect from Otterbox, but it does work by sticking the Duo to it with adhesive, so you can't remove it. With the case on, you cannot fold the Duo completely around into "phone mode" so if you do plan to use it as a phone, do NOT get this case. The other annoying bit, when I do fold it around most of the way, the duo turns off the right side screen instead of the left that's now buried in the case, so you either have to do the "double tap" to swap screens, or just don't do that.
Also, the pen slot is REALLY tight on this case. Tight enough I put my 2nd gen surface pen in it and it pulled the pen apart trying to get it back out. I bought the slim pen (hate it) and it works much better there because there's not a back cap to pull off. I think over time it'll slide out easier as the elastic stretches.
It reminds me of when I did sales back in the early 90's and carried a dayplanner everywhere. That's essentially what your Duo becomes with this case - a digital dayplanner.
It's hard to play games on it due to the folding issue and how much weight the case adds to the device. All in all, I'm very pleased with the case, but I think a lot of people won't be due to those limitations.
Related
I've been looking for a solution that would offer an easier way to hold the TF with one hand and still allow full 360 rotation. I came across these two on Amazon and I was wondering if anyone here has tried them. Here's the quick pros & cons that I can see:
Hand-e-holder: http://amzn.to/jQ5jzc
+ Hold with one hand / 360 rotation
+ Comfortable wide neoprene backing for your hand
+ Size doesn't matter Uses an adhesive disc to mount one side of the holder to the back of your tablet - so it should work with any tablet out there
- I see the adhesive as a con also - not sure I want to stick anything on the back of my TF. Plus, once it's stuck on there it's semi-permanent in that you can't take it off one day and then stick it back on the next (you'll need to buy a new disc for $6)
- Price is kinda high IMO at $40
Video (47 seconds in): http://video.foxnews.com/v/966135816001/gadget-gift-guide-for-dads/
HeloStrap: http://amzn.to/jKnO39
+ Hold with one hand / 360 rotation
+ Comes in multiple colors (red, green, blue, black)
+ Price: Only $25, so $15 cheaper than the Hand-e-holder above
+ Attaches to your tablet via elastic bands or grips so you can easily attach or remove it. Also will work while your table is in a sleeve.
- "Officially" only supports ipad, ipad2, & Xoom. I did a comparison and while the TF is longer on one side, it's shorter on the other. So I jumped into my wayback machine (and google) to figure out the "hypotenuse" and it looks like the TF is ~20mm longer. From what *I* can see of the HeloStrap in the images it certainly looks like the elasticity could accommodate that extra 20mm.
- The part of the HeloStrap that your hand fits into doesn't look as comfortable as the Hand-e-holder. Actually, that was the only con mentioned for it on the Amazon reviews - that it could be a tad more comfortable. But it also wasn't bad enough for folks to warrant it any less than 4 stars.
Video: http://www.youtube.com/watch?v=IpZ4-pdq3ag
I put in an order for the HeloStrap (black) because I like that I can pop it on and off easily - with or without my TF in the sleeve. I'll post back here when it shows up and let folks know how it works out.
I'd still like to hear from anyone else that's tried one of these - OR that has found another option that allows for the 360 rotation.
Please post up how you like it when you get it.
I smell a broken Transformer...
frosty5689 said:
I smell a broken Transformer...
Click to expand...
Click to collapse
LOL
Ya thing so?? Why? The HeloStrap seems to hold fine on the iPads - and it will be a bit more snug on the TF.
Even on the other one, the adhesive seems pretty tight.
I'm not going to be doing any BMXing with it - I'm just looking for easier one-handed holding while couch surfing and swyping with the other..
Unfortunately neither one was Amazon Prime so it may take a several days to get here. Hopefully before the weekend though and I'll be sure to report back!
Never even knew anything like these existed. Of the two I like the HeloStrap more... really tempted to buy one, but I've wasted too much money lately so ill wait for a review.
pogul said:
I'm not going to be doing any BMXing with it - I'm just looking for easier one-handed holding while couch surfing and swyping with the other..
Click to expand...
Click to collapse
Exactly. Worst case scenario for me would be it falls onto me lol.
Hmmmm...imagine what happens when one swipes at some annoying flying bug....methinks major fail?
Unique but pass.
I look forward to impressions
skeeterpro said:
Hmmmm...imagine what happens when one swipes at some annoying flying bug....methinks major fail?
Unique but pass.
Click to expand...
Click to collapse
What? You'd likely shatter your pad doing that no matter what.
I went a similar but slightly different route with the Padlette (padlette.com) which I bought off of Amazon. It's not as fancy as the other options, but it's pretty heavy duty and I have little to no fear about it breaking or slipping off. You can either hold it in one hand or you can slip you hand in behind.
In either case, an option worth looking at.
How comfortable is the padlette on your hand? Does it feel tight after an hour or two holding the Transformer? Is it equally comfortable in portrait and landscape? Also, how is the fit on the tablet?
Also, a question about the Helo, Do the straps at the corners mark/scratch the tablet trim or screen?
Excellent FIND...and I think I am tending towards ordering one too....
I will do more research as well and keep you'al updated...
Good luck with yours.
Regards,
Misfitz
nv88 said:
How comfortable is the padlette on your hand? Does it feel tight after an hour or two holding the Transformer? Is it equally comfortable in portrait and landscape? Also, how is the fit on the tablet?
Click to expand...
Click to collapse
I find it very comfortable. I was participating in an event this weekend that required that I hold the pad for roughly four hours and I did so with no problems. You can either grab it with your fingers (my preferred method) by hooking them around the straps, or you can simply slide your hand in behind.
Because it's at the same angle in either portrait or landscape it's equally easy to hold it in either configuration. I also like that it's removable without leaving any evidence that it was there. The only (minor) problem I've seen is that I have to have it oriented in SW to NE because in the NW to SE direction it covers up the volume rocker.
Thanks. I'm very interested in the padlette... sounds like it may be worth $20.
Sorry for the delay in following-up. I wanted to put a short video up, but my Sony Vegas just hasn't been cooperating with me.
I received the HeloStrap last Thursday and finally had a chance to play with it last night.
Overall, I think it's great. I definitely agree with the 4/5 stars rating on Amazon. The only con being that the hand part of the strap could have been more comfortable. It's not horrible by any means. You just notice it when you first start using it, but then quickly forget about it.
It still looks like the Hand-e-holder would win in the comfort category, BUT - I prefer the HeloStrap because of the lower price and the fact that I can slip it on or off easily vs having to semi-permanently stick the Hand-e-holder on. If I didn't have the Asus sleeve for my TF that probably wouldn't be as much of a factor.
BTW, the HeloStrap gives a nice snug fit on the Transformer with or without the sleeve. It's snug, but not so tight that it would be a concern (this is what I wanted to show in the video). It definitely feels very secure - I don't see the TF "falling out" of it or anything.
It certainly made the couch surfing MUCH more enjoyable last night which was my primary goal!
If I didn't have the sleeve I would be much more tempted to try out the Hand-e-holder, but the HeloStrap is the one that gives me the option of using it easily with the sleeve or without. Now i just need to see if my wife can come up with some idea for making the hand part a lil cushier!
I'll take another crack and getting a video together and will post that as soon as I can.
I finally got around to shooting a quick video of the HeloStrap on my TF. Hopefully this will give you an idea of how it fits - with and without the sleeve.
http://sleeve360.com/
This looks great; wonder if it would fit the Transformer.
lost101 said:
http://sleeve360.com/
This looks great; wonder if it would fit the Transformer.
Click to expand...
Click to collapse
Not sure, but given that it's a full sleeve/case made to fit the ipad, I don't think it would work for the TF. The dimensions are too different.
The HeloStrap just needs to stretch diagonally from one corner to another - whereas that sleeve360 would have to fit all 4 corners.
Let us know if you give it a shot though!
That extra tension on the corners of my Transformer would amplify the screen bleed issue I'm having by 200%. Looks cool though.
Sent from my Transformer TF101 using Tapatalk
Know what - I think you can stick this to the outer part of your folio and use it. So that the TF remains pristine.
Even better - with the Techtree stand, you can create your own 360 degree rotating hand holder.
just received the stock samsung 7.7 case (http://www.amazon.com/gp/product/B006T15BGM)
very nice
looks great, feels great
only complaint, which is minor IMHO
the volume buttons are covered.
power is open
sdcard is open
connector/speakers open
camrea/flash open
onicrom said:
just received the stock samsung 7.7 case (http://www.amazon.com/gp/product/B006T15BGM)
very nice
looks great, feels great
only complaint, which is minor IMHO
the volume buttons are covered.
power is open
sdcard is open
connector/speakers open
camrea/flash open
Click to expand...
Click to collapse
Also it opens left-to-right instead of right-to-left correct? Deal breaker for me...
Jade Eyed Wolf said:
Also it opens left-to-right instead of right-to-left correct? Deal breaker for me...
Click to expand...
Click to collapse
I believe the design of the 7.7 with the power and volume controls on the right side dictated where the hinge is for the book cover case .
Think about it.....If it opened right to left ,then the power and volume buttons would be on the bottom and subject to being accidentily activated when using it as a stand in landscape mode, as it would be sitting on them.Also they couldn't be used sitting on the bottom.
I've had it on since the second day I owned my 7.7 and got used to the left to right opening now. I do really love it's tight fitting, minimalist design and keeps the tab nice and thin.Feels good in my hands and gives more grip when gaming and surfing, works great as a stand and gives some protection for this beautiful screen when transporting it.
I'm not big on the other generic designs that are out there for the 7.7 right now. If you look at ones selling on Ebay ,the sellers are selling the exact one for the 7 inch ones too and look bulky.If something better comes out then I would consider it down the road but I think this is the best one out so far .
agreed, you wouldn't be able to use it as a stand if it opened the other way.
i like the way it opens
Jade Eyed Wolf said:
Also it opens left-to-right instead of right-to-left correct? Deal breaker for me...
Click to expand...
Click to collapse
tab 7.7 case.
Im not very impressed with mine:
1: Dont like the fact it opens the wrong way. I agree they couldnt design it any other way but still dont like it.
2. After about a week the grips that keep it steady when standing up starts slipping on various surfaces. So tab keeps falling flat.
3: No option to put it in the tipical slighly tilted for typing possition like the case for tab 8.9 or 10.1
4. I can already see small cracks in the flexible rubber (hinge bit) and the cut open bit at the power button. For this price I was expecting way more.
Argh. All these mixed reviews of the OEM book cover is getting me quite confused. I don't really think I should shell out the amount of money they're asking for the case...
Maybe I'll just get an envelope/pouch from Timbuk2 or other makers while waiting for that perfect case with the multi-view angles.
As for the cover opening the "wrong" way, I think it's the right way from where the Tab was made. Most East Asia books DO operate like that. Especially mangas
maansleroux said:
Im not very impressed with mine:
1: Dont like the fact it opens the wrong way. I agree they couldnt design it any other way but still dont like it.
2. After about a week the grips that keep it steady when standing up starts slipping on various surfaces. So tab keeps falling flat.
3: No option to put it in the tipical slighly tilted for typing possition like the case for tab 8.9 or 10.1
4. I can already see small cracks in the flexible rubber (hinge bit) and the cut open bit at the power button. For this price I was expecting way more.
Click to expand...
Click to collapse
I have the 8.9 with the book case. Is it the same sleek design and same thinness as the 8.9 case?
I've got the book cover the same day I got my 7.7 and first I didn't like it. The hinge was very stiff, the lid wasn't flush with the back when flipped around completely. But now I'm used to it and it's ok.
But:
- when the lid was flipped to the back for a longer time you can see the top (rubberlike) material delaminating from the hard bit inside in the hinge area
- when the lid is flipped to the back it's rather wobbly. I'm used to hold the Tab in my right hand with resting it on my spread little finger. But then the lid is always moving about and just feels quite assuring.
But it's a lot better than the Samsung pouch, which is simply waste of money.
The d30 leather pouch for the old Tab was way better but of course wasn't as light and space saving and you could always loose it when you were using the Tab.
Just got my Case today.
From all the horror stories I have been reading about it I thought it was going to be horrible but I like it so far.
First off:
It is incredibly thin and light. Adds almost no bulk at all.
Tab fits very well in the case and my hinge is not stiff at all so folds over very easily.
I dont like:
- all the corners except the top right are protected. So if you were to drop it on that corned it will dent the device.
- I actually dont like the cut out for the power. The material sticks out a little when the case is closed. Wish they didnt have cut out for it.
Besides that I think its really good. I dont think you will find another book case that will be as thin as this one.
spridell said:
I have the 8.9 with the book case. Is it the same sleek design and same thinness as the 8.9 case?
Click to expand...
Click to collapse
Well yes and know. Just as sleek but the big difference is the fact that it only has one stand position unlike tab 8.9 and 10.1 design that has two. One upright and one slightly tilted/flat to type. Not sure how to explain it. Hope you understand what I mean...
I, too, like its sleekness and light weight, but I have to say I wouldn't spend $40+ again -- I think it's way overpriced for what it offers -- and that's after having numerous tablets and similar cases (most selling for under $25. If you can afford to wait for the market to catch up I'd recommend not buying this one.
Case
This place had the best price I could find. This was recommended by another member on here.
http://www.thecellguru.com/Products/62515
I ordered it and got confirmation on shipping too. Hence a reputable company to order from.
Thanks for the links...
If you want an alternative to the stock Samsung case I ran across this one on Ebay. Looks OK
http://www.ebay.com/itm/2in1-Touch-...&otn=4&po=LVI&ps=63&clkid=5633388799395603381
Going to give one of these a go - Will post up some pics once it gets here, but I'm not expecting anything too fancy for that price.
None of the others caught my eye and I regularly flip between portrait and landscape.
http://www.ebay.co.uk/itm/360-Rotat...ltDomain_0&hash=item2a18c67618#ht_5026wt_1396
Samsung case
Just got mine (from the cell guru) and I actually like it.
good quality and not too bulky (can still hold it with one hand easily)
for $30, I'm not sure we can find a lot better
O
I got mine today from CellGuru along with the GT 7.7 from NegriElectronics!
So stoked!
I noticed on the plastic box it came in that it had an illustration for Keyboard Mode along with Media-Viewing Mode.
Anybody find out how the Keyboard Mode is supposed to work? It looks like it's propping the Tab up several inches.
I think Keyboard Mode is a mistake. There's really no way this thing can be propped up that way unless you just put something between the two sides.
Here's another case that popped up on ebay. Looks interesting, still debating if I should buy one.
http://www.ebay.com/itm/360-Rotatin...976?pt=LH_DefaultDomain_0&hash=item2a18c67618
I love the Samsung Case. It is quite svelt. I don't like that you only really have one angle to stand but it still looks awesome and as others have mentioned you still get a feel for how thin and light this tablet is.
I want to start reading some books on my tablet, but due to the large size and small bezel it's awkward to use. Any recommendations for a case with a handle or strap to make things easier?
I haven't seen any cases with built in straps, but something like this might work for you:
http://www.amazon.com/Padlette-in-Black/dp/B004DLUZ4I/ref=pd_sim_e_2
I haven't used it myself, but it looks like it could be an easy way to hold the Prime, as you can just slide your hand under the strap. It should also be able to stretch over any folio case you might choose to use.
I use the Sikai microfiber case, and while it doesn't have a strap I find that its soft grippy texture makes it much easier to hold the Prime for extended periods. It also offers excellent protection for the tablet.
http://www.amazon.com/Sikai-Microfi...1?s=electronics&ie=UTF8&qid=1339617190&sr=1-1
That looks interesting, but $20 for a elastic band seems kind of ridiculous to me. If I can't find anything better though I may give it a shot.
Mine just came in today, so I cannot pass full judgement but so far so good.
http://www.amazon.com/rooCASE-Slim-Fit-Adjustable-Transformer-10-1-Inch/dp/B0079MAUNE
Something like this?
http://www.censuspc.com/product-pr-12059.html
Disregard.
richardmkovach said:
Mine just came in today, so I cannot pass full judgement but so far so good.
http://www.amazon.com/rooCASE-Slim-Fit-Adjustable-Transformer-10-1-Inch/dp/B0079MAUNE
Click to expand...
Click to collapse
thats the one i'm currently using
overall the case is pretty good but if you put it on a unleveled surface, the stand won't stand very well as the tablet doesn't sit in the nudge very well
other then that i have no complaints about it
been using it for about a month or so now
with complete frsutration in no keyboard case looking to ever be made for my purchase of the top tablet at the time the Galaxy Pro i have ended my search and somewhat happy.
my first purchase after exhausting months of hoping and searching led me purchase the M-Edge Stealth which upon setting up was the most impressive 3rd party universal i had ever seen. i see no reason to go into all the details that had me loving this case because very quickly i discovered it had 1 flaw that completely killed it. one of the greatest features was t he magnet safe strap and the base was magnet as well and sadly this caused the Pro to go to sleep every time i would touch it. if you push it up in the holsters it was fine but touching it or moving it and it would slide down just a hair and that hair caused the magnets to put it to sleep. i spent some time since it was such a great case trying to make it work but with much sadness i had to return it.
my next purchase and what i am staying with is the Kensington Keyfolio Pro 2 and at this pricxe i can live with the few things i would change.
quick review:
- keyboard types nice and almost all the keys for Home , Settings, Volume, Web, Music, work and go to the app i desired. it also seems to autoconnect after casing it up and opening it back up again so functionaly it is very nice
- case sadly is not a nice leather feel like the M-Edge and although not bad it feels kinda like it might carck eventually like cheap fake leather can do but only time will tell
- it is in no way as thin as the M-Edge and much bulkier than he 11" laptop i would carry but not ridiculous to me
- it has large and small corners with velcro to allow to place it wherever on the back plate that holds it which is different put nice and allows some positioning to what you like. i will say though that i was going with the small angles anyway but the large were on it and one ripped as i tried to take it off and so i know now how to handle them.
- the Logitech or Zagg of my dreams would not have allowed me to take the keyboard out and place it where i like and i see the value in this now as well
- there is no camera hole on the back put it does state that you can cut it out and they thought of this but since i dont use the back camera for anything i dont mind
anyway hope this helps out another 10.1 like me that has been frustrated with no top of the line model available.
fletch33 said:
with complete frsutration in no keyboard case looking to ever be made for my purchase of the top tablet at the time the Galaxy Pro i have ended my search and somewhat happy.
my first purchase after exhausting months of hoping and searching led me purchase the M-Edge Stealth which upon setting up was the most impressive 3rd party universal i had ever seen. i see no reason to go into all the details that had me loving this case because very quickly i discovered it had 1 flaw that completely killed it. one of the greatest features was t he magnet safe strap and the base was magnet as well and sadly this caused the Pro to go to sleep every time i would touch it. if you push it up in the holsters it was fine but touching it or moving it and it would slide down just a hair and that hair caused the magnets to put it to sleep. i spent some time since it was such a great case trying to make it work but with much sadness i had to return it.
my next purchase and what i am staying with is the Kensington Keyfolio Pro 2 and at this pricxe i can live with the few things i would change.
quick review:
- keyboard types nice and almost all the keys for Home , Settings, Volume, Web, Music, work and go to the app i desired. it also seems to autoconnect after casing it up and opening it back up again so functionaly it is very nice
- case sadly is not a nice leather feel like the M-Edge and although not bad it feels kinda like it might carck eventually like cheap fake leather can do but only time will tell
- it is in no way as thin as the M-Edge and much bulkier than he 11" laptop i would carry but not ridiculous to me
- it has large and small corners with velcro to allow to place it wherever on the back plate that holds it which is different put nice and allows some positioning to what you like. i will say though that i was going with the small angles anyway but the large were on it and one ripped as i tried to take it off and so i know now how to handle them.
- the Logitech or Zagg of my dreams would not have allowed me to take the keyboard out and place it where i like and i see the value in this now as well
- there is no camera hole on the back put it does state that you can cut it out and they thought of this but since i dont use the back camera for anything i dont mind
anyway hope this helps out another 10.1 like me that has been frustrated with no top of the line model available.
Click to expand...
Click to collapse
Moko has a keyboard case on Amazon. I bought their book cover case and it is very nice.
Cheers,
Rich
Sent from my BN NookHD+ using Tapatalk
rholm said:
Moko has a keyboard case on Amazon. I bought their book cover case and it is very nice.
Cheers,
Rich
Sent from my BN NookHD+ using Tapatalk
Click to expand...
Click to collapse
yeah i looked at one of those but what i dont like about it:
- the kickstand - this limits position placement where the Kensington allows from straight up with keyboard in case to almost flat and stays in any position between them
- the full edge holster - i like to see the tablet with minimum corners or preferably which only comes with ones made specifically for the tablet that it snaps into place with almost no edge
- the keyboard is large with the big palm area and it does not have all the Android specific keys to launch everything which allows me to rarely touch my screen
i am not saying it isnt nice but it wasnt what i was looking for and i doubt there is an option out there i didnt research. thanks for the info though and maybe its something others might like
Samsung has neglected the Tab Pro 10.1
Its these disappointing products that brought me to just buy a stand alone keyboard option. After almost a year of traveling around the country with my Galaxy Tab Pro 10.1, throwing it in my backpack between classes, and carrying it around to camping trips and etc. I've decided that its a little too late to purchase a case or keyboard folio at this point.
Samsung really did their customers wrong by not producing a suitable keyboard/case for the galaxy tab pro 10.1. At the very list they could have worked with 3rd parties to produce these options.
Got an N6 on the way, looking for a flip case that can easily be removed. I'd like to be able to clip the phone into the case when I'm out and about, but remove it when I'm at home or at the office. Anyone have a case like this? I've done some looking but it seems like most of them are TPU cases attached to the flip cover. For my other phone I found one that clipped around the edges in only a couple of spots. I'm hoping to find something similar or at least one that can stand up to the abuse of many in/out cycles.
Might give this one a shot. It's a bit bigger than some other cases but it feels pretty nice. I will warn you though, while not a huge issue, the edges on the flip cover started to look a little frayed after a few weeks. Probably just wear and tear though.
http://www.case-mate.com/collection...cases/products/black-nexus-6-stand-folio-case
Naked Sam said:
Might give this one a shot. It's a bit bigger than some other cases but it feels pretty nice. I will warn you though, while not a huge issue, the edges on the flip cover started to look a little frayed after a few weeks. Probably just wear and tear though.
http://www.case-mate.com/collection...cases/products/black-nexus-6-stand-folio-case
Click to expand...
Click to collapse
Do you experience any of the button issues that the amazon reviewers had?
http://www.amazon.com/Case-Mate-Google-Nexus-Stand-Folio/dp/B00PIOTZ04
Not particularly, no. I will say they are not the best though. Theres a little bit of play to them. If you can get it cheaper than the 30-some odd dollars they charge, I'd go for it. Personally I usually carry my nexus 6 w/o a case just due to how nice it feels, although if you find a thinner, rubberized flip case let me know.
All in all, I'd give the casemate a shot. Does the job just fine.
I know you might have your reasons for wanting a flip case, but because I wanted to do the same as you (protection when out and about but naked when at home) I went with a really nice larger pouch case instead.
https://www.amazon.com/gp/aw/d/B015HD74YO/ref=ya_aw_oh_bia_dp?ie=UTF8&psc=1
Sent from my Nexus 6 using Tapatalk
Thanks for the help guys. I considered the case-mate, especially since it was originally sold on Google play so it's close to "official"/oem but the multitude of bad reviews scared me off. I like the pouch idea too but I like to have some protection when I'm using the phone on the go since that's the most likely time I'd drop it. I only remove the case when I'm home or at the office since I'll be at the table/couch/desk there's less risk of dropping it and I prefer using the phone naked as much as possible.
I ended up finding one of these in eBay for 25 and it seems to work well, although it isn't as easy to remove as the flip case for my last phone. I haven't used the card slots yet as I'm a little concerned they could scratch the screen and I don't want to use a screen protector.
http://www.amazon.com/Genuine-Motor..._1_2?s=wireless&ie=UTF8&qid=1448630683&sr=1-2
Sent from my Nexus 6 using XDA Free mobile app
bchaney16 said:
Thanks for the help guys. I considered the case-mate, especially since it was originally sold on Google play so it's close to "official"/oem but the multitude of bad reviews scared me off. I like the pouch idea too but I like to have some protection when I'm using the phone on the go since that's the most likely time I'd drop it. I only remove the case when I'm home or at the office since I'll be at the table/couch/desk there's less risk of dropping it and I prefer using the phone naked as much as possible.
I ended up finding one of these in eBay for 25 and it seems to work well, although it isn't as easy to remove as the flip case for my last phone. I haven't used the card slots yet as I'm a little concerned they could scratch the screen and I don't want to use a screen protector.
http://www.amazon.com/Genuine-Motor..._1_2?s=wireless&ie=UTF8&qid=1448630683&sr=1-2
Sent from my Nexus 6 using XDA Free mobile app
Click to expand...
Click to collapse
I've been using this inexpensive but very form-fitting case since I bought the n6. Easy to slip it out of the case, and I've used nillkin book-type cases for multiple phones. They usually last the life the phone (for me, that's about 2 years)
http://www.amazon.com/gp/aw/d/B00RJ..._SL500_SR100,100_&refRID=0G25GYGXGH6EY90F8YAQ
bchaney16 said:
Thanks for the help guys. I considered the case-mate, especially since it was originally sold on Google play so it's close to "official"/oem but the multitude of bad reviews scared me off. I like the pouch idea too but I like to have some protection when I'm using the phone on the go since that's the most likely time I'd drop it. I only remove the case when I'm home or at the office since I'll be at the table/couch/desk there's less risk of dropping it and I prefer using the phone naked as much as possible.
I ended up finding one of these in eBay for 25 and it seems to work well, although it isn't as easy to remove as the flip case for my last phone. I haven't used the card slots yet as I'm a little concerned they could scratch the screen and I don't want to use a screen protector.
http://www.amazon.com/Genuine-Motor..._1_2?s=wireless&ie=UTF8&qid=1448630683&sr=1-2
Sent from my Nexus 6 using XDA Free mobile app
Click to expand...
Click to collapse
This is the one I use, and definitely have enjoyed it. I haven't had any problem with cards scratching the screen yet.
If you're still looking for a wallet themed case, you can try out this one by VENA, I have had it for 2 months and it's been great.
http://www.amazon.com/Google-Nexus-...8&qid=1449112949&sr=1-4&keywords=vena+nexus+6
I like my phones naked or as close as it comes (ultra thin transparent tpu case), but I also like to have something to put it in when out and about. My Nexus 5 was kept in a Mofi Kangaroo pouch case which was great. Unfortunately, they seemed to have stopped making them and only ever made them just about big enough for the N5. There are similar alternatives but none seem as good as the Mofi.
So, finding a removable pouch type case big enough for this beast is a challenge! I ordered a hand made fabric one from etsy which is well made, but at the size of the device, looks more like a small sleeping bag than the home of a sleek Nexus device .
So I took a bit of a gamble and ordered something not designed for the Nexus 6. Its primary advertising is for the Iphone 6+, but also states is suitable for Note 4. Looking at both devices dimensions, I concluded it was almost big enough. The Nexus being little longer, thicker and wider than both devices, but not much.
It seems to have paid off. Its a very nice luxurious pouch wallet case in genuine brown leather from what I gather is a brand owned by tuffluv. You can't tell from the site, but the phone pouch part on the side, top and bottom is elasticated so happily accommodates the Nexus's superior girth!
I can even squeeze it in with tpu case - just, but its a bit tough to pull out. Might have to seek an ultra thin tpu case - any recommendations? Without the TPU, its next to perfect! Fully loaded with cards in the card slots makes it slightly tighter to close fully, but still very acceptable in my book.
Currently its in the sale on Tuffluv site where its claimed to be a £50 case (and going by the other similar cases going for in excess of £50, I believe them!). With the sale price and discount it came to £17.99 delivered.
Just thought I'd share in case anyone else was looking for something similar but hadn't found anything labelled as suitable for the Nexus 6.
Can't paste a link but go to tuff-luv dot coms site and search for "Alston Craig Vintage Genuine Leather Wallet Case Cover Pouch for Apple iPhone 6 Plus / 6s Plus / Samsung Galaxy Note 4 - Brown"
Alston Craig have their own site, but there is a discount code for a couple of quid off on tuff-luv
Hope this helps someone.
Oh, ps, there is a small slip of paper in the packaging that states you should have a screen protector fitted to protect the screen before use. Its material lined; not the soft microfibre type, but not something I would be concerned about.
pps. Only issue I've found is the elastic straps are centred, so covers headphone and usb port. Shame, not a deal breaker for me.