Related
(I cannot post links at this time, a quick Google Search or a look at the Topic titled "Full Root")
The goal of this guide:
I rooted my family members Nook last night but got hung up for a few hours trying to get the ADB Drivers enabled. This is how I made it work. This guide will be expanded and improved once I have my own Nook Tablet (Jan 12th).
Things you need:
• Nook Tablet (Duh)
• USB cord to go between NT and Windows PC
• PC with Windows installed (Tested on XP and x64 Windows 7)
• TGPS_Launcher.apk Installed to your Nook
• ADB USB Drivers for Nook Tablet Extracted to C:\Ntroot on your PC
• USBDeView open on the Windows PC
Step 1:
Ensure that your Nook is version 1.4.0 and not 1.4.1. (I will expand this step later when I have a nook in my hand, I suggest a Google search if you do not know how to do this)
Step 2:
Find this thread on your Nook and download the TGPS_Launcher.apk to your device, then install it. This is well covered in many other threads. (Will expand this step when I have a nook in my hand)
You should now be able to allow USB Debugging, and disable Auto Mount. These settings can sometimes change without your permission, so always uncheck and recheck them to ensure they are properly set.
Step 3:
Plug in your Nook to your PC. Your nook should still respond to your commands, if it tell you in USB Mass Storage mode, then retry Step 2.
Go into your Device Manager. If your Nook shows up with a yellow explanation mark indicating an Error, then you’re in business and really don’t need this guide. All you need to do is update drivers from the file C:\Ntroot. However, assuming that your Nook shows up under Disk Drives and USB Mass storage, then ADB wont be able to see your Nook, please keep reading.
Step 4:
Time to start the USBDeview utility. This utility will open to a list of almost all the drivers your computer has for USB Devices. We are going to uninstall a few of them, namely anything that says “Android” “Nook” or in my case, “Motorola”. You do not need to remove any that specify ADB.
Near the top right hand side, you can sort drivers by when the device was last connected. Do this, then remove any utilities used when you plugged your nook in. Done? Ok, time to see if your work was for nothing.
Step 5:
Make sure once again that USB Debugging is turned on for your Nook. Unplug the Nook, then Unchecked USB Debugging and Check it again. Now plug your device back in and check in Device Manager. You will hopefully see one of two things:
A: You will see your nook with a yellow error icon next to it, which means you just need tell it to update from C:\Ntroot.
B: At the top of the device manager you will see Android Devices, and your nook will show up as Android Composite ADB Interface
If your Nook is still showing under disk drives and mass storage, then try steps 3 and 4 again. Still having trouble? Do a factory reset and try again from step 1.
You should now be able to run your rooting program!
(I feel this should be in the Dev forum, but this is my first post and I was not allowed. Perhaps a mod would like to move this topic?)
I plan on purchasing my own Nook on the 12th on Jan, at which point I will add pictures and expand on my guide. This guide is written from memory and will be edited and improved.
Please consider this guide an Alpha Version
Good write up!
The procedure worked fine on my laptop. When I did it on on my home PC I forgot to disable auto-mount and the Nook installed itself as mass storage. I was able to right click -> un-install all the USB Mass Storage entries (with the Nook unplugged), disable auto-mount, plug the Nook back in, and have it show up correctly.
In short, I did not need to use "USBDeView" as I was able to remove the diveres manually. I suppose if you have more than a handful for USB devices (I just have a Mouse, Keyboard, and printer) "USBDeView" might be helpful to determine which drivers to un-install...
The device manager is enough for most people, but there is a somewhat large number of us that are having trouble still. Possibly because of other devices we have installed before. (I dont understand how all the drivers work and I wont pretend to)
Some people have go so far as putting a fresh install on Windows on a partition of a PC.
I had this problem with both my laptop and my desktop, which surprised me. This worked on both the laptop and PC, so hopefully it can help other people.
I cant wait to get my own tablet on the 12, I will take lot of pictures and make this process more user friendly.
I did all of the steps several times and I still get WPD Driver for the portable device and mass storage for my Nook Tablet. I am guessing I am up a river without a paddle right now.
I will try it in Linux and/or try it on someone's Windows machine.
I am trying to install the drivers from Google's SDK package. So I browse to the correct folder, but device manager says "windows could not find driver software for your device".
Any suggestions? Is there any other set of drivers specifically for NT?
mtelesha said:
I did all of the steps several times and I still get WPD Driver for the portable device and mass storage for my Nook Tablet. I am guessing I am up a river without a paddle right now.
I will try it in Linux and/or try it on someone's Windows machine.
Click to expand...
Click to collapse
Did you sort by last time plugged in and delete all of those too? Have you re-checked and then re-un-checked automount/usb debugging and such?
This is interesting, you'll have to come back and let me know if you ever get it working on your PC. Maybe its a good excuse for a nice healthy re-format and reinstall of windows?
l3ft3r1s said:
I am trying to install the drivers from Google's SDK package. So I browse to the correct folder, but device manager says "windows could not find driver software for your device".
Any suggestions? Is there any other set of drivers specifically for NT?
Click to expand...
Click to collapse
I don't know if they are different, but I used the drivers specificly from the thread about rooting the NT. [I would post a link, but I'm typing from my phone]
You have the yellow error mark next to your device? If so you've almost got it!
The_Joe said:
I don't know if they are different, but I used the drivers specificly from the thread about rooting the NT. [I would post a link, but I'm typing from my phone]
You have the yellow error mark next to your device? If so you've almost got it!
Click to expand...
Click to collapse
Yeap, that did the trick, thanks. Drives installed successfully this time, but adb devices still returns nothing.
Thats very odd. It shows up in device manager as an ADB device?
If so, please try the NookandZergy file, then copy the results so we can try to farther assist
What devices have you rooted before?
I cannot help but feel I will be 100x more useful in a week when I have my device in hand...
adb error: device offline
This drove me nuts for at least a day. Turns out it is what happens when you are plugged into a USB 3.0 port on your PC side. Find out which USB is 2.0 (Front Panel for ZT Systems), use it and life suddenly gets really good.
The_Joe said:
Thats very odd. It shows up in device manager as an ADB device?
If so, please try the NookandZergy file, then copy the results so we can try to farther assist
What devices have you rooted before?
I cannot help but feel I will be 100x more useful in a week when I have my device in hand...
Click to expand...
Click to collapse
At last, after many different things I tried, I am getting a response to adb devices!
I tried disabling and uninstalling usb devices, uninstalling java 7 and installing java 6, re-installing android sdk, at last it worked. Sorry, I can't guess what the problem was :/
l3ft3r1s said:
At last, after many different things I tried, I am getting a response to adb devices!
I tried disabling and uninstalling usb devices, uninstalling java 7 and installing java 6, re-installing android sdk, at last it worked. Sorry, I can't guess what the problem was :/
Click to expand...
Click to collapse
The problem is sdk uninstall and use ccleaner to clean your PC and registries. Use the drivers provided in this forum
Sent from XDA using one of my Android Toys
Edited post to: Sorry to bother anyone, I found the problem. Thank you all for helping!
Well I have done everything and still get permission denials for copying and chmod on my Nook Tablet.
Took the Nook to work and tried it on a fresh machine. Everything went great. Drivers installed and everything ready for usb debug and non-automount and then I run into the same permission errors and being denied access to the folder for Zerk and no chmod.
Same issue no matter what machine. What is wrong with my tablet? I am re-rooting it from being automatically upgrade to 1.4.1. I get it to 1.4.0 with the SD card restore.
LadyPenley said:
Edited post to: Sorry to bother anyone, I found the problem. Thank you all for helping!
Click to expand...
Click to collapse
In the future don't delete your original, just post an edit with the fix. That way when someone else has a similar problem your post can help.
Sent from my BNTV250 using xda premium
mtelesha said:
Well I have done everything and still get permission denials for copying and chmod on my Nook Tablet.
Took the Nook to work and tried it on a fresh machine. Everything went great. Drivers installed and everything ready for usb debug and non-automount and then I run into the same permission errors and being denied access to the folder for Zerk and no chmod.
Same issue no matter what machine. What is wrong with my tablet? I am re-rooting it from being automatically upgrade to 1.4.1. I get it to 1.4.0 with the SD card restore.
Click to expand...
Click to collapse
Did you find a solution? Thats a problem I sadly dont know how to help with. I would start with:
-Check USBDeview and delete anything android/Nook/usb related. Delete just about everything.
-Restart the device
-Uncheck and recheck the USB Debugging boxes
-Recheck and uncheck the auto-mount box
-Test
-Try a different USB Port
-Try another PC
Thanks but didn't work.
thanks, Joe. I did exactly as you mentioined below and had the Android/Nook appear at the top of the Devices listing. However, the adb command still can't find the device. Any suggestions?
Stan White
*****************
The_Joe said:
(I cannot post links at this time, a quick Google Search or a look at the Topic titled "Full Root")
The goal of this guide:
I rooted my family members Nook last night but got hung up for a few hours trying to get the ADB Drivers enabled. This is how I made it work. This guide will be expanded and improved once I have my own Nook Tablet (Jan 12th).
Things you need:
• Nook Tablet (Duh)
• USB cord to go between NT and Windows PC
• PC with Windows installed (Tested on XP and x64 Windows 7)
• TGPS_Launcher.apk Installed to your Nook
• ADB USB Drivers for Nook Tablet Extracted to C:\Ntroot on your PC
• USBDeView open on the Windows PC
Step 1:
Ensure that your Nook is version 1.4.0 and not 1.4.1. (I will expand this step later when I have a nook in my hand, I suggest a Google search if you do not know how to do this)
Step 2:
Find this thread on your Nook and download the TGPS_Launcher.apk to your device, then install it. This is well covered in many other threads. (Will expand this step when I have a nook in my hand)
You should now be able to allow USB Debugging, and disable Auto Mount. These settings can sometimes change without your permission, so always uncheck and recheck them to ensure they are properly set.
Step 3:
Plug in your Nook to your PC. Your nook should still respond to your commands, if it tell you in USB Mass Storage mode, then retry Step 2.
Go into your Device Manager. If your Nook shows up with a yellow explanation mark indicating an Error, then you’re in business and really don’t need this guide. All you need to do is update drivers from the file C:\Ntroot. However, assuming that your Nook shows up under Disk Drives and USB Mass storage, then ADB wont be able to see your Nook, please keep reading.
Step 4:
Time to start the USBDeview utility. This utility will open to a list of almost all the drivers your computer has for USB Devices. We are going to uninstall a few of them, namely anything that says “Android” “Nook” or in my case, “Motorola”. You do not need to remove any that specify ADB.
Near the top right hand side, you can sort drivers by when the device was last connected. Do this, then remove any utilities used when you plugged your nook in. Done? Ok, time to see if your work was for nothing.
Step 5:
Make sure once again that USB Debugging is turned on for your Nook. Unplug the Nook, then Unchecked USB Debugging and Check it again. Now plug your device back in and check in Device Manager. You will hopefully see one of two things:
A: You will see your nook with a yellow error icon next to it, which means you just need tell it to update from C:\Ntroot.
B: At the top of the device manager you will see Android Devices, and your nook will show up as Android Composite ADB Interface
If your Nook is still showing under disk drives and mass storage, then try steps 3 and 4 again. Still having trouble? Do a factory reset and try again from step 1.
You should now be able to run your rooting program!
(I feel this should be in the Dev forum, but this is my first post and I was not allowed. Perhaps a mod would like to move this topic?)
I plan on purchasing my own Nook on the 12th on Jan, at which point I will add pictures and expand on my guide. This guide is written from memory and will be edited and improved.
Please consider this guide an Alpha Version
Click to expand...
Click to collapse
whitets said:
thanks, Joe. I did exactly as you mentioined below and had the Android/Nook appear at the top of the Devices listing. However, the adb command still can't find the device. Any suggestions?
Stan White
*****************
Click to expand...
Click to collapse
I had literally this exact same problem the 6th time I restored and flashed. IF im right, you just need to uncheck then recheck usb debugging.
Let me know if it works!
downloaded all the stuff from the thread. everything went smoothly. i watched the video step by step. after uploading the usbdrivers to my NT it said
"Android ADB interface" instead of "android composite ADB interface"
it shows up in my device manager as a nook tablet still.
i derped. so i thought it would be ok anyways and then tried to zerg rush the baster-ahem NT only to see that the Zerg didn't even find my device.
i promptly decided to just wipe everything from my nook and start fresh but also every single thing i tried has failed to get rid of that blasted "android ADB device" from the one click unroot thing to doing a 8 step reset thingy and just plainly reset and wipe data from the stock settings, and now many hours later i have had enough and decided to swallow my pride and flaunt the noob card. i need help. i must find a way to wipe everything or maybe i can take a step from here. i dunno. derpy derp.
windows 7 ultimate 64bit
nook tablet 8 gb sd card.
(^^this is how people write these things right?)
wagon_burner said:
downloaded all the stuff from the thread. everything went smoothly. i watched the video step by step. after uploading the usbdrivers to my NT it said
"Android ADB interface" instead of "android composite ADB interface"
it shows up in my device manager as a nook tablet still.
i derped. so i thought it would be ok anyways and then tried to zerg rush the baster-ahem NT only to see that the Zerg didn't even find my device.
i promptly decided to just wipe everything from my nook and start fresh but also every single thing i tried has failed to get rid of that blasted "android ADB device" from the one click unroot thing to doing a 8 step reset thingy and just plainly reset and wipe data from the stock settings, and now many hours later i have had enough and decided to swallow my pride and flaunt the noob card. i need help. i must find a way to wipe everything or maybe i can take a step from here. i dunno. derpy derp
windows 7 ultimate 64bit
nook tablet 8 gb sd card.
(^^this is how people write these things right?)
Click to expand...
Click to collapse
hm... well not sure if this is hidden anywhere in your description but did you try reinstalling the nook tablet drivers? since you have android adb device right now, uninstall that and if windows prompts you to restart you should do that. When you uninstall the adb drivers if there is a checkbox saying delete driver software for this device make sure to check that as well. basically what i am trying to say is you want to start fresh as in there should not be any reference to android or nook on your windows pc
another program that may be helpful is using usbdreview which is a program that monitors all devices with usb drivers. this may help is attempting to delete any reference to android and nook on your windows pc. hope this helps!
EDIT: just to add this tidbit in, if your having troubles with ADB, chances are it has nothing to do with your NT but rather with the drivers that Windows has installed already. There's a guide to installing ADB correctly, here's a link:
http://forum.xda-developers.com/showthread.php?t=1424563
ShinnAsuka said:
hm... well not sure if this is hidden anywhere in your description but did you try reinstalling the nook tablet drivers? since you have android adb device right now, uninstall that and if windows prompts you to restart you should do that. When you uninstall the adb drivers if there is a checkbox saying delete driver software for this device make sure to check that as well. basically what i am trying to say is you want to start fresh as in there should not be any reference to android or nook on your windows pc
another program that may be helpful is using usbdreview which is a program that monitors all devices with usb drivers. this may help is attempting to delete any reference to android and nook on your windows pc. hope this helps!
EDIT: just to add this tidbit in, if your having troubles with ADB, chances are it has nothing to do with your NT but rather with the drivers that Windows has installed already. There's a guide to installing ADB correctly, here's a link:
http://forum.xda-developers.com/showthread.php?t=1424563
Click to expand...
Click to collapse
thanks for the reply, tried it. i tried the process and my computer said itfound drivers for my device but couldn't install new drivers on my android ADB interface.
same problem i had previously.
wagon_burner said:
thanks for the reply, tried it. i tried the process and my computer said itfound drivers for my device but couldn't install new drivers on my android ADB interface.
same problem i had previously.
Click to expand...
Click to collapse
hm.. well if it keeps on auto installing generic drivers you will need to disable auto installation of drivers by windows. try looking through each of these links and see if it solves your problem. fyi you should uninstall all drivers relating to android and nook before proceeding
http://www.addictivetips.com/window...tomatic-driver-installation-in-windows-vista/
http://www.addictivetips.com/windows-tips/disable-windows-update-device-driver-search-prompt/
hope this helps
ShinnAsuka said:
hm.. well if it keeps on auto installing generic drivers you will need to disable auto installation of drivers by windows. try looking through each of these links and see if it solves your problem. fyi you should uninstall all drivers relating to android and nook before proceeding
hope this helps
Click to expand...
Click to collapse
well this is weird one atleast for me. i had all those settings on at the very start of the rooting process. and in the end i need to enable in the system config the USER to override the automatic driver install policy. so my anti install was thwarting me this entire time!!! ugh!!! total noob but we all gotta start somewhere. thanks to everyone for helping me out!
If you can't adb and you have the android sdk installed and path set into your environment than it is just a driver issue.
First download usbdriver http://forum.xda-developers.com/showthread.php?t=1354487 and extract to download
Open up device manager, you should see Other devices and under it should show Barnes & Noble Nook Tablet with exclamation mark if cable is connected.
Right click on it, select update driver> browse my computer for driver software>let me pick from a list of device driver on my computer>show all devices>have disk> browse to the download folder that has the inf extension file in it>android composite adb interface>next>yes>installing driver software>Windows has successfully update your driver software> close.
In your device manager should Android Phone and under it should say Android Composite ADB Interface.
Android debugging should be check mark
open up cmd prompt and type adb shell.
Now if it does not work then uninstall the driver and selecting delete the driver and also delete usb storage then redo above step.
I have tried this on four computers, none of them recognize the drivers. It says that no drivers can be found for my device.
So ADB over USB works on the CM9 rom now. Any advice for flashing the recovery img using ADB?
Make sure no other USB devices is attached to the computer that you are working on, USB mouse and keyboard should be ok.
Rename folders that you have placed the nook drivers in the past. You will know because it will list the folder paths that you used in the pass.
Make sure you follow the instruction verbatim. Manually uninstall the device and also it will ask you if you want to delete the driver, say ok. Manually install by instruction and do not let it just pick it. Use a different USB port
Sent from my Barnes & Noble Nook Tablet using Tapatalk
Yes, sorry for the late reply. I step out. Were you able to resolve the usb adb issue?
Sent from my Barnes & Noble Nook Tablet using Tapatalk
Adb over USB worked on cm9 but not on cm10.
dcgrove said:
Adb over USB worked on cm9 but not on cm10.
Click to expand...
Click to collapse
how is adb not working for you? are you unable to get the drivers for the NT installed?
If so, you will need to modify the android_winusb.inf file with the hardware id's found in device manager under the properties of the Nook under Other Devices.
It worked! Thank you! I'm one step closer to playing Dead Trigger! For those of you having problems, try restarting both your nook tablet as well as your actual computer. Back around this time last year when I was installing the NT drivers for the first time, I had a similar problem to what I had today. After I restarted my computer everything worked. Not that it matters, but I did this with the CM10 1.2GHz rom.
Which section of the android_winusb.inf file do I need to modify? I search for nook, tablet, and barnes in the file and came up with no results. Can you post yours so that I can compare the two?
Thanks for the help!
Did 5-touch work for you yet?
dcgrove said:
Which section of the android_winusb.inf file do I need to modify? I search for nook, tablet, and barnes in the file and came up with no results. Can you post yours so that I can compare the two?
Thanks for the help!
Click to expand...
Click to collapse
I didn't ask if you were able to get 5-touch rom cm10 to work or are you still on cm 9? If you are on cm9 , why not try [ROM] SGT7+CM10+Cherry Picks,By meghd00t. New 04/11 5 Touched. It will work either with or without 5-touch implemented. If you decide to install this and you might as well download a free "mulitouch tester" and test if the 5-touch was installed and lucked out. Use the "Thanks" button on the left in the forums.:fingers-crossed:
[ROM] SGT7+CM10+Cherry Picks,By meghd00t. New 06/11 5 Touch is released
ADB over USB isn't working on CM10 on my end, either. It's working on both my Doubleshot and my Vision, and I even updated ADB.
Running Ubuntu Precise.
What's the problem?
blackknightavalon said:
ADB over USB isn't working on CM10 on my end, either. It's working on both my Doubleshot and my Vision, and I even updated ADB.
Running Ubuntu Precise.
Click to expand...
Click to collapse
I currently using this rom
Device manager windows should say Android composite interface
Slide down menu from your nook should indicate "Android debugging enabled"
Went into cmd as Adminstrator and type adb shell
got in with no problems
android_winusb.inf setting for NT CM10
I had problem trying to get ADB working over USB until I stumbled across this post over in the Nook Color General forum.
I followed the procedure outlined in the post and put in the following entry for my NT:
Code:
;Nook Tablet
%CompositeAdbInterface% = USB_Install, USB\VID_18D1&PID_6860&MI_01
and the ADB USB interface finally works for me.
The CM10 build I am using is Succulent's "cm-10-20121225-acclaim-HD.zip (GCC 4.6)".
I'm working on installing Ubuntu to my prime using the thread i linked below, but for part of that i need to go into my prime via desktop Ubuntu command line. The issue i'm having is that when i plug into my desktop using the USB cable, Ubuntu won't recognize my Prime and i can't move files back and forth.
The thread says to install the naked drivers (which i downloaded), but the instructions were only for windows machines. From what I can tell Ubuntu doesn't have a "Device Manager" where I could use to manually install drivers.
I've done Google searches, and searched XDA for the past week or so and I haven't come across anyone having this similar issue while using Ubuntu. If anyone can shed some light on my situation I'd greatly appreciate it.
Thanks!
How to install Ubuntu on transformer prime: http://forum.xda-developers.com/showthread.php?t=1603921
RailsRanger said:
I'm working on installing Ubuntu to my prime using the thread i linked below, but for part of that i need to go into my prime via desktop Ubuntu command line. The issue i'm having is that when i plug into my desktop using the USB cable, Ubuntu won't recognize my Prime and i can't move files back and forth.
The thread says to install the naked drivers (which i downloaded), but the instructions were only for windows machines. From what I can tell Ubuntu doesn't have a "Device Manager" where I could use to manually install drivers.
I've done Google searches, and searched XDA for the past week or so and I haven't come across anyone having this similar issue while using Ubuntu. If anyone can shed some light on my situation I'd greatly appreciate it.
Thanks!
How to install Ubuntu on transformer prime: http://forum.xda-developers.com/showthread.php?t=1603921
Click to expand...
Click to collapse
Try uninstalling the drivers from your machine then reinstalling the basic Asus drivers by plugging the Prime in. If that doesn't do it then I'll have to load up my Ubuntu parition and see if I can debug with you that way.
RailsRanger said:
I'm working on installing Ubuntu to my prime using the thread i linked below, but for part of that i need to go into my prime via desktop Ubuntu command line. The issue i'm having is that when i plug into my desktop using the USB cable, Ubuntu won't recognize my Prime and i can't move files back and forth.
The thread says to install the naked drivers (which i downloaded), but the instructions were only for windows machines. From what I can tell Ubuntu doesn't have a "Device Manager" where I could use to manually install drivers.
I've done Google searches, and searched XDA for the past week or so and I haven't come across anyone having this similar issue while using Ubuntu. If anyone can shed some light on my situation I'd greatly appreciate it.
Thanks!
How to install Ubuntu on transformer prime: http://forum.xda-developers.com/showthread.php?t=1603921
Click to expand...
Click to collapse
In my experience, you do not need to download any drivers to access your Prime from an Ubuntu PC -- the naked drivers are strictly a Windows thing from what I remember. You need to set up the 51-android.rules file in the /etc/udev/rules folder. And, you may or may not need to make an entry in adb_usb.ini (I believe this file is in a hidden folder) -- try it without first. If you do a little research on 51-android.rules, you will see that this is quite easy. And, the vendor and device numbers you need to plug into 51-android.rules can be obtained by typing lsusb at the terminal command line, with your Prime plugged into the PC. You also need to have debugging turn on under Developer Options in Settings. After you change the 51-android.rules file, you need to log off and log back on, so it gets run (there is another way to run it, but I do not remember how). I am away from my Prime and Ubuntu machine, but can get you further details later, if you cannot figure it out from the above information.
(P.S.) Giving you the path and file names from my memory. They are probably correct ... at least they are very close to being correct.
So, I wrote the 51-android.rules file like you suggested but I still can't access most files on my prime. When I tell it to connect as a camera i can view picutres, but when it connects as MTP I still get nothing.I looked in the /dev directory to see if i could find my SD card to continue on with the Ubuntu installation, but no luck there either.Your suggestions have been helping though, i'm getting closer. Thanks to both of you who replied so far.
RailsRanger said:
So, I wrote the 51-android.rules file like you suggested but I still can't access most files on my prime. When I tell it to connect as a camera i can view pictures, but when it connects as MTP I still get nothing.I looked in the /dev directory to see if i could find my SD card to continue on with the Ubuntu installation, but no luck there either.Your suggestions have been helping though, i'm getting closer. Thanks to both of you who replied so far.
Click to expand...
Click to collapse
51-android.rules is really for giving you access to your TFP with adb and other Linux commands in Terminal (Android Debugging must be enabled under Developer Options for this to work). 51-android.rules has nothing to do with PTP (camera) or MTP, as far as I know. I really do not know what you are trying to do, or at least how you are trying to do it, so it is difficult to suggest anything. If you are just trying to copy files to the TFP, you may have better luck with Windows than Linux. I'm pretty sure that most of the TFP's file system does not show up in the Linux File Browser, when plugged in to a USB port (only PTP & MTP work, as far as I know ... both are limited).
There are many users on this site who can help you, if you explain exactly what you are trying to do.
Hello...these forums seem to be both about older Dell Venue 8 models and also the newish Venue 8 7000 (7840). I do not know if they are supposed to be the same for rooting purposes.
I am not a complete newbie, having rooted several phones and tablets in the past, but I did that by faithfully following setp-by-step instructions I found here. I did find the following thread:
http://forum.xda-developers.com/android/development/intel-android-devices-root-temp-cwm-t2975096
which seems to be relevant for the 7840, but post#1 assumes much prior knowledge and is beyond my capability to follow and implement.
Any advice or guidance would be appreciated, and pointing me to a set of instructions that doesn't assume much expertise would be fantastic.
Chuckles960 said:
Hello...these forums seem to be both about older Dell Venue 8 models and also the newish Venue 8 7000 (7840). I do not know if they are supposed to be the same for rooting purposes.
I am not a complete newbie, having rooted several phones and tablets in the past, but I did that by faithfully following setp-by-step instructions I found here. I did find the following thread:
http://forum.xda-developers.com/android/development/intel-android-devices-root-temp-cwm-t2975096
which seems to be relevant for the 7840, but post#1 assumes much prior knowledge and is beyond my capability to follow and implement.
Any advice or guidance would be appreciated, and pointing me to a set of instructions that doesn't assume much expertise would be fantastic.
Click to expand...
Click to collapse
That is what I used.
bamfsig45 said:
That is what I used.
Click to expand...
Click to collapse
That may be, but as I noted above, I cannot follow these instructions. The poster himself/herself notes that these are rough notes. Would anyone be able/willing to provide a walkthrough for non-experts?
If you have any fear, do not proceed or get help from a knowledgeable warm body
Chuckles960 said:
That may be, but as I noted above, I cannot follow these instructions. The poster himself/herself notes that these are rough notes. Would anyone be able/willing to provide a walkthrough for non-experts?
Click to expand...
Click to collapse
@Chuckles960 - I know this isn't the answer you want to hear, but I would not attempt this method if you in any way feel uncomfortable with the process. The Venue 7840 does not have any 'reverse'/unbrick procedures out there (as of yet). Also, Dell does not offer their ROM for reinstall like other manufacturers do. However, there is a link to a full Nandroid backup of the 4.4.4 stock ROM within the Venue General forum.
Have you ever installed recovery, unlocked bootloader(s) or rooted any other Android devices?
-Jay
PS - By 'knowledgeable warm body', I didn't mean it offensively. Just a friend or someone you can meet locally that can help you in person. Trust me, this is hard to translate over a forum. I just want to make sure you don't have any frustrations with your Venue. Congrats on the purchase!
It's easy...
1) Install the Intel ADB Drivers from: https://software.intel.com/en-us/android/articles/intel-usb-driver-for-android-devices
(Use compatibilty mode if you are using Windows 8.1)
2) Device Manager may not properly detect the drivers so you have to specify the Android ADB driver from the install folder above.
3) Extract IntelAndroid-FBRL-01-17-2015.7z into a folder.
4) Copy UPDATE-SuperSU-vX.Xx.zip to the internal storage or SD card
5) Run launcher.bat and and make sure it detects your device in debug mode (Turn on debug from Settings on the device.)
6) Choose the T3 mode and wait for Fastboot to load and select the SuperSU zip and install. Reboot... It should be rooted.
This worked for my 7840 and 3840...
And, in case you were not aware, enable USB Debugging on your 7840. After doing so, upon the first cable connection to the PC, a pop-up will appear asking for permissions to connect. Be sure to approve this.
DanielNTX said:
It's easy...
1) Install the Intel ADB Drivers from: https://software.intel.com/en-us/android/articles/intel-usb-driver-for-android-devices
(Use compatibilty mode if you are using Windows 8.1)
2) Device Manager may not properly detect the drivers so you have to specify the Android ADB driver from the install folder above.
3) Extract IntelAndroid-FBRL-01-17-2015.7z into a folder.
4) Copy UPDATE-SuperSU-vX.Xx.zip to the internal storage or SD card
5) Run launcher.bat and and make sure it detects your device in debug mode (Turn on debug from Settings on the device.)
6) Choose the T3 mode and wait for Fastboot to load and select the SuperSU zip and install. Reboot... It should be rooted.
This worked for my 7840 and 3840...
Click to expand...
Click to collapse
Chuckles960 said:
That may be, but as I noted above, I cannot follow these instructions. The poster himself/herself notes that these are rough notes. Would anyone be able/willing to provide a walkthrough for non-experts?
Click to expand...
Click to collapse
I'm right there with you - The challenge I'm having seems to be more with the Windows drivers... it always sees the device as MTP or just a portable device regardless of having the Intel and pointing Windows to the Intel install folder. Can't seem to get it to recognize the device correctly.
In my case I to select the ADB Interface driver manually (can't remember exactly) rather than relying on Windows to identify which driver it needed on it's own. IIRC you have to click 'Have disk' and go through the steps there until you get two lists, one of manufacturers and the other of device types. You're looking for an intel ADB interface or similar.
anggusss said:
In my case I to select the ADB Interface driver manually (can't remember exactly) rather than relying on Windows to identify which driver it needed on it's own. IIRC you have to click 'Have disk' and go through the steps there until you get two lists, one of manufacturers and the other of device types. You're looking for an intel ADB interface or similar.
Click to expand...
Click to collapse
This was the piece I was missing!!!! I used the Have Disk and managed to load the ADB driver that way. THANK YOU!
Thanks to all for the tips! I will try it now.
Question: there is a Lollipop update promised for this month (or so). Will I be able to root again after the update, using the same procedures? (I am sure this is a naive question.)
DanielNTX said:
It's easy...
1) Install the Intel ADB Drivers from: https://software.intel.com/en-us/android/articles/intel-usb-driver-for-android-devices
(Use compatibilty mode if you are using Windows 8.1)
2) Device Manager may not properly detect the drivers so you have to specify the Android ADB driver from the install folder above.
3) Extract IntelAndroid-FBRL-01-17-2015.7z into a folder.
4) Copy UPDATE-SuperSU-vX.Xx.zip to the internal storage or SD card
5) Run launcher.bat and and make sure it detects your device in debug mode (Turn on debug from Settings on the device.)
6) Choose the T3 mode and wait for Fastboot to load and select the SuperSU zip and install. Reboot... It should be rooted.
This worked for my 7840 and 3840...
Click to expand...
Click to collapse
This worked fine on my 7840, but only after some struggling with drivers. I have Win8.1 64bit, and the ADB driver from these instructions (line#1) did not work. Going back to the main thread (linked in the first post on this thread) and paging through to (I think) page 10, I found a link to Win8.1 ADB drivers and those worked.
Other than that, everything went smoothly. Thanks to everyone who responded helpfully!
Now what happens when we get Lollipop? TBD?
Chuckles960 said:
This worked fine on my 7840, but only after some struggling with drivers. I have Win8.1 64bit, and the ADB driver from these instructions (line#1) did not work. Going back to the main thread (linked in the first post on this thread) and paging through to (I think) page 10, I found a link to Win8.1 ADB drivers and those worked.
Other than that, everything went smoothly. Thanks to everyone who responded helpfully!
Now what happens when we get Lollipop? TBD?
Click to expand...
Click to collapse
Exactly! If SuperSU build supports that version of Lollipop, the tethered CWM should hopefully work ONLY if Dell doesn't have some f***ery in any new boot.img updates
Thanks for making this thread, I just successfully rooted my 7840. Now hopefully Dell comes out with a lollipop update and we still keep root :fingers-crossed:
Has anyone tried this with Lollipop yet ?
I accidentally (!) installed the OTA.
I wanted to install LinuxDeploy
Many thanks
Old method not working with latest lollipop update...
Can someone post the screen shot of trigger T2 from the tethered cwm recovery , I know it doesn't work but I need to see the batch screen output.
screens T2 T3
here r the screens for T2 , cannot attach pictures or 2 dumb
https://drive.google.com/folderview...I1REJPOVZhWEx5dlNGZF9iV1MzNnJ0c3c&usp=sharing
and T3
https://drive.google.com/folderview...BkRm5DUHdFbkJqdVpIVXJjM1FicGNtWjg&usp=sharing
Bad news on the root and 5.0.2. I feel pretty confident that it will eventually come to be. I just wish there were more development and fanfare for the 7840. It is such a stunning piece of technical
Gonna need a couple testers soon, think I found away just need to work out a few kinks,
I have an early test ready if interested reply to this post.
yeah, i'm in :good: