Related
hi all,
just recently bought a hero and sorry for the noob questions. any help will be greatly appreciated.
1.) How do i activate the green notification light for any new notifications? so far i can only use the trackball to flash for a number of minutes and thats it.
2.) how can i permanently use 3g as a signal without switching back to edge? i prefer 3g because it is faster, but when i use the web, it reverts to edge making it slower when browsing. i want it never to switch back to edge just 3g.
3.) How do you update radio and rom? is it the same with winmo? i have a topaz and im currently using hero.
Thanks for any feedback!
So far the only answer i found was the notification light as a bug or a defect. line switching is still unsolved and updating.
orouborus said:
So far the only answer i found was the notification light as a bug or a defect. line switching is still unsolved and updating.
Click to expand...
Click to collapse
1) It works as it is stated in the user's manual. How can you state that it is a bug or defect? Funny... Just because it works that way on Magic or G1 does not mean that it has to be the same on Hero.
2) You cannot as your phone will automatically switch between them when one another is not available. You phone will select 3G only if it is available around where you are. If it switches to Edge/GPRS/whatever, that means you don't have 3G signals around you.
3) There are 1.000 posts on the forum here regarding updating ROM, etc. Search is our best friend.
cokbok said:
2) You cannot as your phone will automatically switch between them when one another is not available. You phone will select 3G only if it is available around where you are. If it switches to Edge/GPRS/whatever, that means you don't have 3G signals around you.
Click to expand...
Click to collapse
You can force HSDPA, but you do so at your own risk!
You need to download AnyCut from the Market and create new shortcut to the activity "Phone Info". From this short cut, you access a screen which gives lots of diagnostic info about the phones state and there is an option to "Set preferred network type". By default this is "WCDMA Preferred", but if you want to force to always use HSDPA you should select "WCDMA Only".
Note if you do this, your phone will never drop back to 2G, even if a 2G signal is available and a 3G one isn't.
I wouldn't advise playing around with any of the other options in this screen unless you know what you are doing!
Regards,
Dave
cokbok said:
1) It works as it is stated in the user's manual. How can you state that it is a bug or defect? Funny... Just because it works that way on Magic or G1 does not mean that it has to be the same on Hero.
2) You cannot as your phone will automatically switch between them when one another is not available. You phone will select 3G only if it is available around where you are. If it switches to Edge/GPRS/whatever, that means you don't have 3G signals around you.
3) There are 1.000 posts on the forum here regarding updating ROM, etc. Search is our best friend.
Click to expand...
Click to collapse
thanks for the info about point 2.
Thanks again!
foxmeister said:
You can force HSDPA, but you do so at your own risk!
You need to download AnyCut from the Market and create new shortcut to the activity "Phone Info". From this short cut, you access a screen which gives lots of diagnostic info about the phones state and there is an option to "Set preferred network type". By default this is "WCDMA Preferred", but if you want to force to always use HSDPA you should select "WCDMA Only".
Note if you do this, your phone will never drop back to 2G, even if a 2G signal is available and a 3G one isn't.
I wouldn't advise playing around with any of the other options in this screen unless you know what you are doing!
Regards,
Dave
Click to expand...
Click to collapse
very interesting. because for my topaz i always set it to wcdma only. willing to give it a try. where can i download it? do i need a gmail account for this? cant find it any website where it can be downloaded.
Android software is downloadable via the Android Market application on your hero - any purchases are made by using a google checkout account which is set up like paypal so you don't need to enter your details all the time...
Dayzee
Dayzee said:
Android software is downloadable via the Android Market application on your hero - any purchases are made by using a google checkout account which is set up like paypal so you don't need to enter your details all the time...
Dayzee[/QUOT
i tried logging in the market and there are TONS of applications! had to make a gmail accouint for this. hehe!
Click to expand...
Click to collapse
Ya!! What a great resource!! Very different to the WMo world and I like it a lot.....
Dayz
I recently flashed on cm7 on my aria. it is great but my data usage began shooting up. i realized it was due to the fact that everytime i lock my phone, it disables my wifi (i saw this because everytime i unlock im on 3g for a 1-2 seconds then i get on wifi so that means that the whole time my phone is locked it uses 3g data ) is there anyway i can prevent this from occurring??
Thanks,
Okachowwa
Menu -> settings -> wireless & networks -> wi-fi settings -> menu -> advanced -> wi-fi sleep policy -> never
I think that's it.
Sent from my Aria - CM7 Build 24
okachowwa said:
I recently flashed on cm7 on my aria. it is great but my data usage began shooting up. i realized it was due to the fact that everytime i lock my phone, it disables my wifi (i saw this because everytime i unlock im on 3g for a 1-2 seconds then i get on wifi so that means that the whole time my phone is locked it uses 3g data ) is there anyway i can prevent this from occurring??
Thanks,
Okachowwa
Click to expand...
Click to collapse
Have you checked the Wifi Settings to see which sleep option is selected? There is an 'Never' option which tells wifi to stay on even when the phone sleeps.
One thing I noticed its that if I leave my house I have to turn off wifi and turn it back on to find my router.
Sent from my Liberty using XDA App
klbmth said:
One thing I noticed its that if I leave my house I have to turn off wifi and turn it back on to find my router.
Sent from my Liberty using XDA App
Click to expand...
Click to collapse
yup...that's why you just turn your wifi off with the notification widget (very simple and painless might I add) if you know you're leaving the house...what's the point of having wifi enabled if you're not in range of your network? all it's going to do is drain your battery. i left my wifi enabled one day when i sent to work and within half the day i had ~12% battery life...definitely not good practice to leave it enabled that's my 2 cents, do as you wish though. to each his own.
klbmth said:
One thing I noticed its that if I leave my house I have to turn off wifi and turn it back on to find my router.
Sent from my Liberty using XDA App
Click to expand...
Click to collapse
Yup, I have the same issue with CM7 nightlies. This worked flawlessly in CM6 and stock2.1. So far there isn't a viable solution.
from the CM6.1.1 thread...
Q. How do I keep my wifi from going to sleep every time the screen shuts off?
A. There is a hidden feature that disables wifi sleep.
menu > Settings > Wireless & networks > wifi settings > menu (again) > advanced > Wi-Fi Sleep policy > Never > menu > Save
However: although you can keep the wifi service from sleeping, the wifi driver will still sleep on it's own after detecting no bus activity for a period of time.
Click to expand...
Click to collapse
mattbollenbach said:
from the CM6.1.1 thread...
Click to expand...
Click to collapse
I've made sure to set Wifi Sleep Policy to "Never" but that did not fix my wifi problems. What I see when I open Wifi Settings is a cycle of:
Code:
Scanning --> Connecting --> Disconnected... Scanning, etc
When I look in logcat it shows it attemping (in vain) to authenticate against the last wifi network I was using -- even though it is no longer in range (and clear across town). In a nutshell it is refusing to recognize the actual nearby network UNTIL I toggle wifi settings.
I've had the same behavior on FR008 and the stock ATT 2.1 load as well. When Wifi is in that on but not really connected state some apps can wake it up...the default browser usually will, but Listen would not. I just gave up and only turn on wifi when I need it.
kinggrowler said:
I've made sure to set Wifi Sleep Policy to "Never" but that did not fix my wifi problems. What I see when I open Wifi Settings is a cycle of:
Code:
Scanning --> Connecting --> Disconnected... Scanning, etc
When I look in logcat it shows it attemping (in vain) to authenticate against the last wifi network I was using -- even though it is no longer in range (and clear across town). In a nutshell it is refusing to recognize the actual nearby network UNTIL I toggle wifi settings.
Click to expand...
Click to collapse
What is the point of having wifi set to ON when you are not in range of a network? Hence why, if you are using CM7 or CM6, you should utilize the notification widget and turn wifi off if you know you're leaving the area of your network. It's simple. Things aren't ALWAYS going to work how YOU want them to work. Thing will not always be automatic. I think I quote attn1 when I say this, just because it doesn't work how you want it to work, does not mean it is broken.
zervic said:
What is the point of having wifi set to ON when you are not in range of a network? Hence why, if you are using CM7 or CM6, you should utilize the notification widget and turn wifi off if you know you're leaving the area of your network. It's simple. Things aren't ALWAYS going to work how YOU want them to work. Thing will not always be automatic. I think I quote attn1 when I say this, just because it doesn't work how you want it to work, does not mean it is broken.
Click to expand...
Click to collapse
Well, just because people don't work exactly like you work, does not mean they are doing it wrong. If something is broken I'm going to call it out. I might be incorrect, but let's be clear: you aren't questioning that wifi in CM7 isn't working the way it did in CM6, you are questioning my behavior -- which is a weak argument.
I guess you don't understand the issue, so I'll spell it out:
Wifi worked flawlessly and automatically for me in stock 2.1 AND CM6. This automatic behavior does not work in CM7. Manually toggling something that simply "just worked" before is a regression, not a feature. Hence the reason I point it out -- the devs can't fix something unless they know it's broken, and I seriously doubt the devs are able to test all/every permutation. I have nothing but respect for the work they do, thus my very respectful tones in my earlier posts. I've had no indication that the devs are unwilling to get feedback about their work.
You asked a question though, and here is the answer:
I leave Wifi on all the time because I'm a consultant -- I work in many different locations throughout the week, travelling the country. I have dozens of wifi networks saved on my phone, and it is useful for me to have my phone automatically jump on the correct, nearest network. I'd rather use free wifi instead of paying AT&T for data charges. It is not always possible for me to remember I'm in a location with a known wifi network, or to remember to manually toggle wifi settings: it is useful for me to have this happen in the background. Sometimes I'm on a call, sometimes I'm heading into a meeting and I'd rather not mess with my phone. I want wifi to be on all time, scanning for the correct network, and jumping on it when it's in range.
Outrageous, right?! Not actually -- this is the existing behavior in CM6 and stock 2.1. From my standpoint, wifi just worked -- I didn't have to think about it, didn't have to manually toggle something to prevent AT&T data charges.
This is desired behavior for me, and I'm happy with rolling back to CM6 to get it. I understand that _you_ don't need this behavior, but that doesn't mean it's wrong. It just means the world is bigger than you realized.
And yes: wifi in CM7 (beta) is currently broken. Read the threads. Many people are having problems with it.
zervic said:
yup...that's why you just turn your wifi off with the notification widget (very simple and painless might I add) if you know you're leaving the house...what's the point of having wifi enabled if you're not in range of your network? all it's going to do is drain your battery. i left my wifi enabled one day when i sent to work and within half the day i had ~12% battery life...definitely not good practice to leave it enabled that's my 2 cents, do as you wish though. to each his own.
Click to expand...
Click to collapse
That's a good tip, I feel kind of dumb for not thinking about it lol and I also agree that it is good practice to do so. I just wanted to point it out in case a dev was going through this thread which is relevant to the topic.
Sent from my Liberty using XDA App
kinggrowler said:
Well, just because people don't work exactly like you work, does not mean they are doing it wrong. If something is broken I'm going to call it out. I might be incorrect, but let's be clear: you aren't questioning that wifi in CM7 isn't working the way it did in CM6, you are questioning my behavior -- which is a weak argument.
I guess you don't understand the issue, so I'll spell it out:
Wifi worked flawlessly and automatically for me in stock 2.1 AND CM6. This automatic behavior does not work in CM7. Manually toggling something that simply "just worked" before is a regression, not a feature. Hence the reason I point it out -- the devs can't fix something unless they know it's broken, and I seriously doubt the devs are able to test all/every permutation. I have nothing but respect for the work they do, thus my very respectful tones in my earlier posts. I've had no indication that the devs are unwilling to get feedback about their work.
You asked a question though, and here is the answer:
I leave Wifi on all the time because I'm a consultant -- I work in many different locations throughout the week, travelling the country. I have dozens of wifi networks saved on my phone, and it is useful for me to have my phone automatically jump on the correct, nearest network. I'd rather use free wifi instead of paying AT&T for data charges. It is not always possible for me to remember I'm in a location with a known wifi network, or to remember to manually toggle wifi settings: it is useful for me to have this happen in the background. Sometimes I'm on a call, sometimes I'm heading into a meeting and I'd rather not mess with my phone. I want wifi to be on all time, scanning for the correct network, and jumping on it when it's in range.
Outrageous, right?! Not actually -- this is the existing behavior in CM6 and stock 2.1. From my standpoint, wifi just worked -- I didn't have to think about it, didn't have to manually toggle something to prevent AT&T data charges.
This is desired behavior for me, and I'm happy with rolling back to CM6 to get it. I understand that _you_ don't need this behavior, but that doesn't mean it's wrong. It just means the world is bigger than you realized.
And yes: wifi in CM7 (beta) is currently broken. Read the threads. Many people are having problems with it.
Click to expand...
Click to collapse
fyi CM6 & 2.1 != CM7. Your argument is null & void.
Also, being a "consultant" and the very important man you are, flashing a rom that's not even in beta stages yet probably isn't the best idea you've ever had.
zervic said:
Also, being a "consultant" and the very important man you are, flashing a rom that's not even in beta stages yet probably isn't the best idea you've ever had.
Click to expand...
Click to collapse
Why do you remind us that the rom is in a beta stage? "Beta" implies it is not fully functional, but your argument all along has been that it works perfectly....
Look, it's clear you haven't actually understood any of my posts. I'm highlighting error messages or erratic behavior I see in logcat running CM7. I've posted what I've seen so the devs can take action, or not, as they choose. Since you aren't in that audience I don't understand what your beef is.
Oh wait! Straw man arguments; personal attacks; logical fallacies: I've been dealing with either a highschool student or a troll - not sure which.
zervic said:
fyi CM6 & 2.1 != CM7. Your argument is null & void.
Click to expand...
Click to collapse
...although I have a strong suspicion.
kinggrowler said:
Why do you remind us that the rom is in a beta stage? "Beta" implies it is not fully functional, but your argument all along has been that it works perfectly....
Look, it's clear you haven't actually understood any of my posts. I'm highlighting error messages or erratic behavior I see in logcat running CM7. I've posted what I've seen so the devs can take action, or not, as they choose. Since you aren't in that audience I don't understand what your beef is.
Oh wait! Straw man arguments; personal attacks; logical fallacies: I've been dealing with either a highschool student or a troll - not sure which.
...although I have a strong suspicion.
Click to expand...
Click to collapse
First of all:
attn1 said:
Just because something does not work they way you'd like it to doesn't mean you've discovered a bug.
Click to expand...
Click to collapse
That being said. Beta does NOT necessarily imply that thing are not fully functioning, it simply implies that it hasn't been put into RC or stable. You can have a fully functioning beta program. HOWEVER, it may not be working properly. But creating a thread about an issue that's been brought up 20+ times now is pointless. I'm PRETTY sure the devs know about the issue, should it actually be an issue. Now that I just wasted another 15 seconds of my life, i'm going to casually /part from this thread and I'll end my post with this quote again, in case you didn't catch it the first time.
attn1 said:
Just because something does not work they way you'd like it to doesn't mean you've discovered a bug.
Click to expand...
Click to collapse
This is for OP and very important man of the day, kinggrowler:
http://forum.xda-developers.com/showpost.php?p=11171075&postcount=1054
and i'll even quote it directly for you:
attn1 said:
There are no broad wifi issues to resolve, and I do not plan to change the wifi driver one iota. I am using the one that works right for most people, and flawlessly for me.
If you are not having such luck, then you need to look at your access point if you have already wiped data.
Really, the constant carping about wifi is absolutely pointless.
Click to expand...
Click to collapse
I believe the proper thing for me to say right now would be:
game. set. match.
Me too. I can't roam between networks, either. I have to disable and re-enable the wifi each time.
zervic said:
...what's the point of having wifi enabled if you're not in range of your network?
Click to expand...
Click to collapse
1) Because Google Maps uses known wifi hotspots to help establish your location.
2) So that you don't have to keep toggling wifi on and off when moving between hotspots (or home and work, for example).
3) To use the network notification feature (aka "notify me when an open network is available").
HTH
Edit: seems to be fixed in RC3!
zervic said:
What is the point of having wifi set to ON when you are not in range of a network? Hence why, if you are using CM7 or CM6, you should utilize the notification widget and turn wifi off if you know you're leaving the area of your network. It's simple. Things aren't ALWAYS going to work how YOU want them to work. Thing will not always be automatic. I think I quote attn1 when I say this, just because it doesn't work how you want it to work, does not mean it is broken.
Click to expand...
Click to collapse
i have try everything and still same issues with wifi. and i change the radio ( baseband ). still i am thinking of uninstalling it bc i dont have wifi
Sorry to tell you but that was with the old wifi stuff (every nightly up to build 25), which I had no problem with. The RC/nightlies have new wifi data made by jznomoney, which I have on and off problems with. Its working for most people but there are a handful who are having problems. I flashed ladios' kernel and my wifi is doing a lot better with the new RC/nightlies.
Signatures are fancy.
kinggrowler said:
I've made sure to set Wifi Sleep Policy to "Never" but that did not fix my wifi problems. What I see when I open Wifi Settings is a cycle of:
Code:
Scanning --> Connecting --> Disconnected... Scanning, etc
When I look in logcat it shows it attemping (in vain) to authenticate against the last wifi network I was using -- even though it is no longer in range (and clear across town). In a nutshell it is refusing to recognize the actual nearby network UNTIL I toggle wifi settings.
Click to expand...
Click to collapse
I've noticed something similar with CM7 on my Aria. When I leave the house and come back it doesn't always connect automatically and it will enter into this cycle of scanning, connecting, disconnected.
I had to reboot the phone to get it to stop the cycle and stay connected. I don't use a lot of data anyway but I still prefer to use wifi when available. Interestingly just now it wouldn't even see any of my neighbor's wifi networks at all which is odd.
For the last three days I have have little to no data connection. Phone calls and text messages work and i can connect over Wifi.
I called Verizon and they have had similar reports in Southern California, but not necessarily in my area. I have talked with other TBolt owners who have no problem.
So here's the technical side of things: I was running BAMF 1.6 when the problem started, so I flashed CM7 and the 2.5 radio but the problem persisted. I have the phone set to CDMA auto (PRL). [I don't have 4G in my area] Ping tests fail..
I don't really know what I am looking for, hopefully confirmation that this must be a problem from Verizon, and that I can expect this to correct itself.
Any insight would be appreciated.
UPDATE: I have replaced the MR2.5 radio with the MR2 as well as a different kernal to no avail.
I have reset all the APNs, and have selected every reasonable combination of network mode and data options. nothing.
Is this possible a hardware issue? Can a 3G antenna be broken but still be able send and receive phone calls and SMS ? (MMS seems to work as well)
damn first world problems...
try turning off the radio
dial *#*#4636#*#*
Select phone info
scroll down you will see a button that says Turn off radio
Hit that and wait for it to update and wait for your signal bar to get an X. Then turn it back on. I have had the same issue before and this always works for me.
I have tried turning the radio on and off multiple times. I have even tried turning data off and then turning the radio off and on.
but I thank you for the suggestion.
use his method not the lte off/on or a tool kit
Sent from my ADR6400L using XDA Premium App
Hi Guys
I've got a BestBuy WIfI only Flyer and I'm running Paul O'Brien's HoneyComb 3.41.405.1 and it runs great.
The battery life seems similar to GingerBread but I've noticed that the thing using most of the battery is the mobile radio (via 'battery use' in settings). When I switch to Airplane mode and then turn on WiFi battery life does in deed seem to be much better !
I could leave it in Airplane Mode - I just have to put up with the irratating airplane mode lock screen instead of the beautiful HTC sense one but I'd like to understand why the radio circuitry appears to be turned on. It suggests something is not quite right.
Can anyone shed some light on this ?
Thanks
PS - Since the battery life is about the same as with GingerBread I wonder if the mobile radio circuitry was getting turned even in the standard HTC rom as well ?
Are you using Twitter? THat killed a lot of battery when I was on HC.
I don't think Twitter is running. It is installed but I've NEVER signed in.
In any case all data would surely be over WiFi? The Issue here is that the mobile radio (I.e the 3G circuitry) is appearing to draw some power from the battery on a WiFi Only Flyer !
On initial set up when it asks for if you use 3g of wifi you may have clicked next so it tries to use 3g. the only way is to wipe data and when it asks for wifi or 3g you pick wifi only.
There is an issue if you do not declare wifi only during initial setup screens then the cell standby code runs continuously trying to initialize a non-existent radio, and eats the battery. The only way to fix it is as described in the post above.
Thanks Guys
I'll try wiping the flyer. Whats the best way to back-up my apps under HC?
Regards
There is a way to fix this through the easter egg menus hidden in the flyer. There's a thread on how to do this somewhere, but I'll give the instructions here anyway.
Open the flyer's calculator app.
Put the flyer in landscape mode so you can see all the advanced function keys.
Enter: !+!+4636+!+! and hit = .
From the easter egg menu which comes up, select "Tablet Information."
Click "Turn off radio."
That's it!
Note that you have to do this each time the flyer reboots. It isn't sticky. Luckily the symbols entered into calculator ARE sticky, so just go into it again and hit equals (unless you have to use the calculator for something else, of course. I recommend downloading a different app, like RealCalc, for everyday use).
MetaDude said:
Thanks Guys
I'll try wiping the flyer. Whats the best way to back-up my apps under HC?
Regards
Click to expand...
Click to collapse
Titianum backup is what I use.
Battery life better now
Hi Guys
I used the Calculator 'Easter Egg' to turn off the mobile radio.
I've been running the Flyer ON-STOP for the last 8 hours and I've got 8% battery left. For 6 1/2 of those hours I've been watching YouTube videos (Just left it playing through my playlists) so it's been using WiFi for at least that long out of the 8 hours.
Seems like pretty good battery life to me !
Thanks again
Alright everyone, I'm getting annoyed and I'm hoping someone more talented than me can come here to save the day. I'm attempting to use a conditional init.d script that runs if it finds the file of my choosing (in this case, radio.sh in /system/bin) and then if it finds it, it will disable radio. What I'm having problems with is that it keeps giving me connection refused on boot when disabling radio. So, any idea?
Have you mounted your system as read/write at the beginning of the script?
Sent from my PG86100 using Tapatalk
I'm using radio options I shouldn't have to but I guess I'll try that
Sent aboard the Evo Express
What command do you use to disable radio?
I tried a setprop command, that didnt work and I also tried "radiooptions 1"
edit: This was using both adb and init.d
Code:
stop ril-daemon
globatron said:
Code:
stop ril-daemon
Click to expand...
Click to collapse
Hey globatron,
If you remove phone.apk and telephoneyproviders.apk you no longer get cell stand by in battery usage but it breaks GPS. If I leave the files and issue the stop ril-daemon command. It turns off the radio and GPS still works but cell standby appears in battery usage. Is there a way to disable the radios completely, still have GPS work and not have cell standby in battery usage?
Sent from my Samsung Galaxy S II
You have to have cell standby for GPS to work, I think they are in the same chip.
Sent by breaking the sound barrier
I don't get what you're trying to accomplish, if youre trying to disable the CDMA radio and use wifi only like me, but want GPS, just turn on airplane mode, turn on wifi and GPS and you're set. If I'm mistaken about what you're trying to do then never mind.
Side note, leaving the CDMA radio on didn't bother me because I don't have service with my view, but it still takes from the battery of course.
Sent from my Rooted HTC EVO View 4G (Honeycomb)
Gordon, this is for a ROM. I'm looking into several options to kill it on boot simply. That's it.
I see, I I think I came across some lads in the Flyer forums either here or AC that had it working.
Sent from my Rooted HTC EVO View 4G (Honeycomb)
Here is something odd.. gps does work if you remove the stuff for cell standby. I thought it was broken (everytime I tried in my house it never locked on a signal) but it's not. I fired up navigation just now and while it did take longer to lock a signal then with the radio stuff in, it did lock and start giving me directions.. I guess the cell radios assist the gps(considerably) but are not fully responsible for it.
This is an important functionality to disable the cell radio!
I've been trying for days now - can't understand why Android doesn't simply provide a checkbox in the settings for this (like for Bluetooth or Wifi).
When people suggest airplane mode, they don't realize that this blocks the stock dialer from placing any calls.
This is really poor design on the part of the Android team: they include a sip stack (thank you!) , then force users to resort to airplane mode to disable the cell, and then block the dialer (when all a user wants is simply to use sip over wifi)...
wutzin said:
This is an important functionality to disable the cell radio!
I've been trying for days now - can't understand why Android doesn't simply provide a checkbox in the settings for this (like for Bluetooth or Wifi).
When people suggest airplane mode, they don't realize that this blocks the stock dialer from placing any calls.
This is really poor design on the part of the Android team: they include a sip stack (thank you!) , then force users to resort to airplane mode to disable the cell, and then block the dialer (when all a user wants is simply to use sip over wifi)...
Click to expand...
Click to collapse
Why would you care about the stock dialer for placing call if you turned off your radio? You ain't making any calls without the radio anyway.... I'm confused
immjg said:
Why would you care about the stock dialer for placing call if you turned off your radio? You ain't making any calls without the radio anyway.... I'm confused
Click to expand...
Click to collapse
He is using sip over WiFi, but he needs a dialer. That doesn't use the mobile radio.
Indirect said:
What I'm having problems with is that it keeps giving me connection refused on boot when disabling radio. So, any idea?
Click to expand...
Click to collapse
sounds like it sends the command before ril is ready.
The only way I got it to work was by having "sleep 60" before the radiooptions command.
Maybe there is some trigger for ril, so the command can run once its ready. I had done a loop to check if ril-daemon is running first, but that doesn't seem to be enough (probably takes more time to load the vender RIL next)
It seems radiooptions just disables the radio, but it still uses power.
Did anybody have success in disabling the radio? I'm also looking for the way how to use View 4G abroad without Sprint.
May be it's possible to modify the firmware to make it "wifi only" - exactly as it made for the HTC Flyer?
mar1boro said:
Did anybody have success in disabling the radio? I'm also looking for the way how to use View 4G abroad without Sprint.
May be it's possible to modify the firmware to make it "wifi only" - exactly as it made for the HTC Flyer?
Click to expand...
Click to collapse
Download a WiFi only Rom
Sent from my HTC EVO View using xda premium on CypherROM
wyldkard said:
Download a WiFi only Rom
Sent from my HTC EVO View using xda premium on CypherROM
Click to expand...
Click to collapse
Is there any for HTC Evo View 4G? The one for the HTC Flyer is not compatible with the View 4G, is it?
I would like a GB, not the HC version.