[Q] Question about ROM and Basebands - Galaxy S III Q&A, Help & Troubleshooting

I have an unbranded and unlocked S3. My original ROM Firmware was
PDA:LE8 PHONE:LE8 CSC:LE4
My baseband isI9300XXLF2 from http://forum.xda-developers.com/showthread.php?t=1646610
I loaded a new ROM
I9300XXALF2
Base Firmware: I9300XXALF2 (4.0.4)
Region Europe
Country: United Kingdom
Carrier: Unbranded
Build Date: 5 June 2012
Modem: XXLF2
CSC: OXALF2
Change List: 671647
My firmware has changed but shouldn't the Baseband change as well? I also was surprised that all of my apps and everything were still there. I thought this would be wiped out on a new ROM. Do I need to worry about the Baseband and what is it? I am also curious because I did all this to get the latest OTA. I still am unable to get it. When I sign up for the software updates should I say UK as my country even tho I am in the USA. Will it matter?

LF2 IS the latest OTA.

can you post a link with your stock rom?

Baseband is Modem and like the CSC it is not always upgraded with each firmware revision .
It is also flash able on its own from the stock roms thread as per instructions .
Likewise CSC and also likewise Kernels .
http://forum.xda-developers.com/showthread.php?t=1671969
jje

Related

Odin Flash - XWKF3 to ?? (2.3.4)

Hey Guys,
I've tried all morning to find out what i should pick to flash my new phone, i've searched the forum but atm everything is kinda making me go crazy. I've understand that Different regions got different firmware, i've checked the post about all the official firmware. But now I must admit, i've given up and admit to seek help in here.
My phone:
PDA: I9100XWKF3
Phone: I9100XXKE7
CSC: I9100XXKF1
Location: Denmark
Language: Danish
Android: 2.3.3
NEW FIRMWARE:
I wish to run 2.3.4 ofc, so im looking for a firmware that enables this.
I've found by reading allot of posts in here, that this site have allot:
http://www.samfirmware.com/WEBPROTECT-i9100.htm
The problem is, that they have allot of different and seems to make no sense, wich one i should pick.
Here is a little list:
I9100XXKG1 ## EXT4.PIT 2.3.4 2011 July 5 MULTI - CSC - OXAKG1
I9100XXKH3 ## EXT4.PIT 2.3.4 2011 August 12 MULTI - CSC - OXAKH13
I9100XXKH1 ## EXT4.PIT 2.3.4 2011 August 1 MULTI - CSC - OXAKH1
Problem:
My phone is atm at: I9100XWKF3 and on the list there is no such thing. Only KH1-KH3-KG..
What is the risk by flashing one of them?, i mean KF and KH is not the same i guess...
Could someone please help me to find the right one for me?
Many THanks.
Well you are on KF3 firmware like me. It's an old build. Still 2.3.4 hasn't released officially yet, so only option is a leaked ROM if you wanna get 2.3.4. Just download an European firmware from this thread,
http://forum.xda-developers.com/showthread.php?t=1075278
There is NO risk involved, but keep in mind that it's not the Official firmware, so Kies will stop giving you any information on future firmware updates.
Regards.
KH3 latest.
Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
Post 3 .
Risk almost nil
jje
ithehappy said:
Well you are on KF3 firmware like me. It's an old build. Still 2.3.4 hasn't released officially yet, so only option is a leaked ROM if you wanna get 2.3.4. Just download an European firmware from this thread,
http://forum.xda-developers.com/showthread.php?t=1075278
There is NO risk involved, but keep in mind that it's not the Official firmware, so Kies will stop giving you any information on future firmware updates.
Regards.
Click to expand...
Click to collapse
Would there be any idea in waiting for the official release?...
If not, wich one of the firmwares from the link you gave me would fit me best?..
Mikkel D. Hansen said:
Would there be any idea in waiting for the official release?...
You wait and you wait . your choice .
If not, wich one of the firmwares from the link you gave me would fit me best?..
KH3 Multi CSC if their is no CSC for your location .
jje
Click to expand...
Click to collapse
JJEgan said:
KH3 latest.
Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
Post 3 .
Risk almost nil
jje
Click to expand...
Click to collapse
XXKH3
Android 2.3.4
This package has: PDA: XXKH3| Modem/phone: XXKH3| CSC: OXAKH3.
Download: http://www.multiupload.com/P92D3CE95I
XXKH3 Stock Kernel: http://www.multiupload.com/C4DRUIJTLL
Password: [email protected]
This would fit?... And whenever the official release is out, i could just flash back and kies would update?!
OBS:
What is OXAKH3.??
Mikkel D. Hansen said:
XXKH3
Android 2.3.4
This package has: PDA: XXKH3| Modem/phone: XXKH3| CSC: OXAKH3.
Download: http://www.multiupload.com/P92D3CE95I
XXKH3 Stock Kernel: http://www.multiupload.com/C4DRUIJTLL
Password: [email protected]
This would fit?... And whenever the official release is out, i could just flash back and kies would update?!
OBS:
What is OXAKH3.??
Click to expand...
Click to collapse
OXA is POLISH
Read post 3 .
jje
OXAKH3 is KH3 firmware of Europe region.
Official update should be coming soon, depends on damn Samnsung, when they will release it to Kies servers. If you want Kies updates, then as I said, you need to be on a Stock firmware, Kies won't show any updates if your device is on a Custom/Leaked firmware.
Regards.

XWKJ3 rom?

Hi
Was gonna try the official samsung rom from here
http://www.sammobile.com/showthread.php?t=23
Im in the UK running a mix of XWKJ2 PDA with a baseband of XXKI4 on the O2 network
Which would be the best (latest) Rom from that page.
I was going to use
I9100XWKJ3 ## 2.3.5 2011 October CSC - XEN
Not sure what CSC I would need and I presume the KJ3 is the latest out with XW being a uk code?
Is the baseband upgrade needed/worth it?
Thanks

[Q] New Zealand CSC Question

Hey guys,
I have a New Zealand Samsung S3 GT-I9300.
It's got no branding on the phone, no logos, no logos on startup etc and I didn't buy it from a Telecom, 2 Degrees, or Vodafone store so I assume its unlocked. I bought if from an electronic store called **** Smith.
It's on the Telecom network - just chucked in my Telecom SIM.
OS - 4.0.4
AP - 19300XXALF2
CP - 19300XXLF2
CSC - 19300NZCALF1
At the moment when I plug the phone into Kies, it gives me the message "Your device's current firmware version is not supported to firmware via Kies".
After doing some research and troubleshooting steps like making sure Kies is up to date, reinstalling drivers etc I saw that some people said that if your CSC is wrong Kies won't upgrade your phone.
I realised that Jellybean hasn't been released for NZ yet but I figure that Kies should be saying something along the line of 'You have the latest firmware..' instead of saying its not supported.
So I was just wondering if my CSC looks fine for an unlocked NZ S3.
Let me know if you need any more information.
Cheers
My S3 is unlocked from Parallel on Vodafone NZ had the same CSC with no problems. I wouldn't worry about it much you can always flash via Odin.
If you are worried about it, flash the stock rom via Odin and use the BTU CSC that's what I've done, I have had no issues with it at all, and it's updated itself all the way up to 4.1.1 OTA with no problem.
Also, have you rooted the phone? If so it can report that you are unable to update via Kies
Taubin said:
My S3 is unlocked from Parallel on Vodafone NZ had the same CSC with no problems. I wouldn't worry about it much you can always flash via Odin.
If you are worried about it, flash the stock rom via Odin and use the BTU CSC that's what I've done, I have had no issues with it at all, and it's updated itself all the way up to 4.1.1 OTA with no problem.
Also, have you rooted the phone? If so it can report that you are unable to update via Kies
Click to expand...
Click to collapse
Thanks for your reply and advice
My phone isn't rooted.
BTU is UK right?
Couldn't I just change the CSC instead of flashing another ROM?
This will void warranty right? Don't really mind but just wondering out of curiosity.
Cheers
Mine isn't rooted either. You don't need to be in order to install the rom through Odin.
BTU is in fact UK
You can try to change the CSC first and see if that works, keep in mind it's going to wipe your phone when you do so.
It should not void the warranty, as you will still be using a default stock official rom, most people load the stock official when sending it in for repair work
By the way, the stock rom I used was the one listed here http://forum.xda-developers.com/showthread.php?t=1646610 from May 13th :
I9300XXALE8 Download (Thanks To SamMobile!)
Base Firmware: I9300XXALE8 (4.0.4)
Region Europe
Country: United Kingdom
Carrier: Unbranded
Build Date: 13 May 2012
Modem: XXLE8
CSC: OXAALE8
Change List: 554452
I then accepted OTA updates on the phone directly to get it up to the current rom
Taubin said:
Mine isn't rooted either. You don't need to be in order to install the rom through Odin.
BTU is in fact UK
You can try to change the CSC first and see if that works, keep in mind it's going to wipe your phone when you do so.
It should not void the warranty, as you will still be using a default stock official rom, most people load the stock official when sending it in for repair work
By the way, the stock rom I used was the one listed here http://forum.xda-developers.com/showthread.php?t=1646610 from May 13th :
I9300XXALE8 Download (Thanks To SamMobile!)
Base Firmware: I9300XXALE8 (4.0.4)
Region Europe
Country: United Kingdom
Carrier: Unbranded
Build Date: 13 May 2012
Modem: XXLE8
CSC: OXAALE8
Change List: 554452
I then accepted OTA updates on the phone directly to get it up to the current rom
Click to expand...
Click to collapse
Thanks for that!
I'll give that a go.
Thanks
Just by coincidence my phone updated to Jellybean 4.1.1 via OTA a few days ago without me having to flash another stock ROM on it.
Also, Kies now reports that I have the latest firmware.
Looks like all I had to do was be a bit more patient.
Everything seems to be in order now.
Cheers for your help anyway guys.

[Q] How do I choose stock firmware for my region?

Hello everyone,
My phone details are as follows:
I9100XWLPT
Base Firmware: I9100XWLPT (4.0.4)
Region: Europe
Country United Kingdom / Ireland
Carrier: Unbranded
Build Date: 27 July 2012
Modem: XXLQ6
CSC: XEULPA
And this is supported by networks in my region (Pakistan). But unfortunately this has the emmc brick bug as well. If I flash the following firmware using Odin then what kinda issues I will have to face? Will my network support it? And do I need to make a backup of efs folder before flashing? How can I choose the right firmware? PLEASE GUIDE I HAVE NO IDEA.
I9100XXLPQ
Base Firmware: I9100XXLPQ (4.0.3)
Region Poland (XEO)
Build Date: 9th March 2012
Modem: XXLPQ
CSC: OXALPQ
Thanks in advance!
shahrozeumar said:
Hello everyone,
My phone details are as follows:
I9100XWLPT
Base Firmware: I9100XWLPT (4.0.4)
Region: Europe
Country United Kingdom / Ireland
Carrier: Unbranded
Build Date: 27 July 2012
Modem: XXLQ6
CSC: XEULPA
And this is supported by networks in my region (Pakistan). But unfortunately this has the emmc brick bug as well. If I flash the following firmware using Odin then what kinda issues I will have to face? Will my network support it? And do I need to make a backup of efs folder before flashing? How can I choose the right firmware? PLEASE GUIDE I HAVE NO IDEA.
I9100XXLPQ
Base Firmware: I9100XXLPQ (4.0.3)
Region Poland (XEO)
Build Date: 9th March 2012
Modem: XXLPQ
CSC: OXALPQ
Thanks in advance!
Click to expand...
Click to collapse
You need to do some searching by yourself, that is what the search function is for. EPS Pro for backing up EFS folder: http://forum.xda-developers.com/showthread.php?t=1308546 Make a backup before flashing Siyah Kernel, and make sure you have root in order for backup to work.
You can just flash Siyah Kernel v4.1.5 via Odin to prevent brickbug in ICS v4.0.4. Look at my rooting guide in my sig, just change the CF-Root file with Siyah Kernel. Refer here: www.gokhanmoral.com/public/files/siyahkernel/v4/Siyah-s2-v4.1.5.tar
In case you are unsure what brickbug is, the stock 4.0.4 kernel has MMC_CAP_ERASE enabled which bricks your phone when a wipe data command is used in stock recovery. Siyah kernel deals with this by disabling MMC_CAP_ERASE. This command needs to be enabled for the brick to occur, so don't worry about having to change your ROM.
But if I plan to unroot my phone latter on then I will have to get it back on stock and If I flash the same stock 4.0.4 then I wont be able to wipe data thats why I was asking about LPQ. Will it work for me?
shahrozeumar said:
But if I plan to unroot my phone latter on then I will have to get it back on stock and If I flash the same stock 4.0.4 then I wont be able to wipe data thats why I was asking about LPQ. Will it work for me?
Click to expand...
Click to collapse
Well if you wished to unroot it and return it to stock 4.0.4 again, you would just be where you are now. Yes, you can flash 4.0.3 if you want, although I struggle to understand why you would return it to stock at a later date anyway.
If your network struggles to pick up a good signal on it, there are many modems out there that you can flash to make your network signal stronger. Refer here: http://forum.xda-developers.com/showthread.php?t=1131950

[Q] Debranding & 4.3 update (Ireland)

Hi Folks,
I have a question regarding debranding / updating my S3 (4.1.2)
This is all new to me and with the wealth of information here and elsewhere online I'm a little unsure about the correct files to use.
My S3 was originally on O2 Ireland and it has been unlocked so I can use it on Vodafone Ireland.
The phone is on 4.1.2 and Kies and OTA firmware update both state I have the latest firmware.
So now curiosity has gotten the better of me and I want to manually update to 4.3, and while I'm at it, I want to debrand and just have a stock firmware.
Reading online says the Switzerland firmware is stock and bloatware free.
These are the details...
PDA: I9300XXUGNA5
CSC: I9300AUTGNA1
MODEM: I9300XXUGMK6
If I flash with these, is that all I need to do to debrand and have the latest firmware?
There is a 4.3 Vodafone firmware on Sammobile so I suppose I could use that if the Swiss one didn't work.
As a noob to flashing, ROMS, Odin etc etc I appreciate any advide or guidance.
Thanks
Ciaran
No stock rom is debloated, they all have tons of Samsung rubbish included.
Any firmware for the i9300 will work, just make sure the included modem will work in your country. Usually anything European is fine but you may lose OTA due to wrong CSC.
Current phone details are...
AP : I9300XXELLA
CP : I9300XXELLA
CSC : I9300O2IELL1
Hoping for some more advice!
How do I know if the csc is correct?
This is the Vodafone Ireland file,
I9300XXUGNA5_I9300VFGGNB1_VDI
and the (more generic?) Swiss file,
I9300XXUGNA5_I9300AUTGNA1_AUT
I know the Swiss file won't have any branding, but don't know if the modem and csc settings are correct.
The Vodafone one on the otherhand will have the correct settings but lots of VF bloatware and branding.

Categories

Resources