Xperia X10 mini pro process system failure - Sony Ericsson Xperia Mini, Mini Pro, Xperia Pro, A

Hello I searched through the threads, bud didn't find anything that matched so here it goes.
I am working with a x10 mini pro, on which I have installed( bout a year ago) a cyanogen froyobread mod. Today I decided to update that, I downloaded flashtool and started working around it. Connected my phone and clicked on "Clean" by mistake, afterwards I think I clicked "cancel" , but I am not entirely sure.... anyways now my phone reboots all the time, when it loads up all of the apps crash ( for example "com.android.phone has stopped unexpectedly", launcher pro aswell) and a message appears - informing me that the applications system has failed.
I tried to troubleshoot this, even tried to install a new kernel and rom, but whenever I enter flashmode and attempt to continue the installation of the firmware, the phone itself disconnects from the process and continues on booting the cyanogen. What should I do. Any ideas ?
Edit: Also it seems that I am unable to enter recovery and fastboot.
Mod Message : Could you delete this, I unintentionally posted it in the wrong forum section. Thank you

Looks like you'll have to check THIS section... here, we talk about Xperia Mini Pro, not X10 Mini

Related

[Q] HELP!!! LaucherPro crashes, xRecovery won't boot, phone is useless

I have just rooted my phone and installed xcyanogen v3.4 for the x10mini pro.
Everything worked fine, I have even managed to go into xRecovery after the installation and reinstalled xcyanogen three times.
This morning, I updated my Busybox from busybox installer from Market. Installed V1.19 busybox, I guess the previous one installed with cynogenmod6 was v1.15 then
The phone reboots suddenly, and hence after
*I only have an Unlock screen that works, displaying clock, charging stats, Sound off etc with NO SIGNALS
*If i unlock the screen, it will have a 'DSOmanager stopped Unexpectly force close' window followed by unlimited 'LauncherPro stopped Unexpectly force close' windows
*I am UNABLE to go into xRecovery to reinstall the system, unalbe to do anything now.
and the Phone reboots all the time automatically, but still get back to this unlock screen.
I am a newbie, any pros would help me pls? Thanks so much!
rccr said:
I have just rooted my phone and installed xcyanogen v3.4 for the x10mini pro.
Everything worked fine, I have even managed to go into xRecovery after the installation and reinstalled xcyanogen three times.
This morning, I updated my Busybox from busybox installer from Market. Installed V1.19 busybox, I guess the previous one installed with cynogenmod6 was v1.15 then
The phone reboots suddenly, and hence after
*I only have an Unlock screen that works, displaying clock, charging stats, Sound off etc with NO SIGNALS
*If i unlock the screen, it will have a 'DSOmanager stopped Unexpectly force close' window followed by unlimited 'LauncherPro stopped Unexpectly force close' windows
*I am UNABLE to go into xRecovery to reinstall the system, unalbe to do anything now.
and the Phone reboots all the time automatically, but still get back to this unlock screen.
I am a newbie, any pros would help me pls? Thanks so much!
Click to expand...
Click to collapse
Newbie too, and had the same problem, phone would boot into a low resolution mode (everything looked huge), followed by most applications and widgets crashing, I was lucky enough for the phone to forget the association with ADW Launcher and it allowed me to use the default home screen when launching it.
Now I'm in the process of repairing it using SEUS, need to charge up the phone before, is there's a way to fix this without having to lose everything? (Can't use the backup service)
rccr, try accessing safe mode, hold the menu key while it's booting.
Thanks!
Thanks! I have got to a post from xcyanogen forum, ways of recovering a 'killed device'. I was managed to flash back Sony Ericsson 2.1 using SEUS. Have installed back CyanogenMod6-v3.6, now everything working as before.
Help!!!!
Rccr can you please tell me the exact link?
You should never replace busybox on a custom rom or if ypy have xrec installed because they depend on their specific bysybox version!
Sent from my X10mini running on MiniCM 2.2.1 RC2 / aZuZu ZiG ZaG Alpha 0

[Q] white sony ericsson logo appears and disappears

Hi, I have read all the related threads about this kind of issue however mine seems to be a unique.
I had tried installing a customized ROM using xRecovery, after the installation was complete I rebooted the phone using the REBOOT button in xRecovery's menu.
When the phone restarted itself I constantly get the SONY ERICSSON white text come back up and then disappear after couple of seconds. This process has been now continuing for more than 3 hours straight.
My phone is an xperia x10, running on the android 2.3 (gingerbread) OS.
I took the following steps to see if I can fix anything (however no results):
1. Tried flashing the OS again however got this msg:
Android version : / kernel version : link_image[1965]: 1154 could not load needed library 'libm.so' for '/system/bin/sh' (reserve_mem_region[834]: OOPS: 1154 prelinked library 'libm.so' mapped at 0x40010000, not at 0xafc00000)CANNOT LINK EXECUTABLE
2. I factory reset the phone
3. Kept the battery out for couple of minutes
Basically, the phone keeps restarting itself and nothing I can do. I want to know if there are any solutions or that the phone is gone?!
Your help would be much appreciated!
Reflash your phone, that means you have to flash 2.3 generic again OR if you are able to get into xrecovery you may able to put a costum ron again.
Sent from my X10i using xda premium

[SOLVED] X10 mini is dead...

Because of new version of gingerDX(i don't trust it), my phone was very slow. Even when I downgraded to miniCM7 it was very slow, freezed every 15 min and didn't recognize sdCard. So I made a backup, than installed miniCM7 rom, and after(before leaving recovery), tried to restore data from advanced restore in CWM. It freezed at "RESTORING LIB" for 3 hours, and I rebooted my phone right from recovery(. My phone is not alive anymore(. It doesn't vibrate when i try to power it on... It is like brick(. Does anyone has idea what to do?
Everything went to right places=), my x10 mini is now working! Sorry for unneeded post.
P.S. If anybody will face this problem, just put of battery cabel, and then put it back

[HELP]T-mobile Pulse mini (Huawei U8110) problems

Hey,
I have a T-mobile Pulse mini (Huawei U8110) and it has 3 problems. These problems preventing me to install a new custom ROM...
1.) When I connect the device to my PC, I get this message:
"USB-device cannot be detected"
And the PC handle it like an "Unable device". Can't even use "fastboot.exe" 'cuz of this.
So the device don't communicate with my PC in any way even... So I can't install a normal recovery program (like Amon RA's Recovery or CWM's Recovery).
2.) The current recovery program is Clockwordmod's Recovery, but it's not working right... Downloaded (like .apk file) the ROM Manager and installed Recovery for Pulse Mini. The problem with recovery is: When I press VolUp and RedPhone keys when hitting PowerOn, the T-Mobile logo disappears rightly, but the menu don't wanna show up... Just stucked there.
3.) Tried to download ROM Manager in ".apk" format, but got an error while installing ("There is a problem parsing the package"). Got this message with all apps what I want to install, almost. From Market I can install apps, but I have an old version of it, and there is no ROM Manager Free, just the paid version (and I have no Credit Card for pay). I tried to download a new one Market, but of course I got the same error message like with ROM Manager.
Really don't know what should even try...
Tried almost everything what I could.
My device is: T-mobile Pulse Mini (bought in Hungary [yepp, I'm hungarian..])
Android OS: Green Tiger FroYo 2.2.1
That would be great if anyone could help me with this. It's really annoying me. = )
EDIT: Now, successfully installed the stock 2.1 ROM (with some miracle), but the .apk files gave the same message: "There is a problem parsing the package"...
Now I have the stock recovery too, but it's useless.
So, anyone can help me?
Seems not...
Hi there I have T-mobile UK Pulse mini (Huawei U8110),phon is rooted and on Fresh Zodiac Fruit Eclair ROM by Cedric (FZF-ROM) from here http://forum.xda-developers.com/showthread.php?t=932605
my problem is that I still cannot download any application from android market,could someone give me solution please ??
download of Googla Play didnt solved the problem cannot be instaled....

Xperia X10 mini pro process system failure

Hello I searched through the threads, bud didn't find anything that matched so here it goes.
I am working with a x10 mini pro, on which I have installed( bout a year ago) a cyanogen froyobread mod. Today I decided to update that, I downloaded flashtool and started working around it. Connected my phone and clicked on "Clean" by mistake, afterwards I think I clicked "cancel" , but I am not entirely sure.... anyways now my phone reboots all the time, when it loads up all of the apps crash ( for example "com.android.phone has stopped unexpectedly", launcher pro aswell) and a message appears - informing me that the applications system has failed.
I tried to troubleshoot this, even tried to install a new kernel and rom, but whenever I enter flashmode and attempt to continue the installation of the firmware, the phone itself disconnects from the process and continues on booting the cyanogen. What should I do. Any ideas ?
Also it seems that I am unable to enter recovery and fastboot.
EDIT: Found a way to fix it, but it restores to the original sony firmware( still better than bugged, right ?)
Here is a link: ww w.sonymobile .com/global-en/tools/update-service/ Just download and follow the steps
Yes, Thats true that app called SEUS on this forum. When you device bricked you can always restore it with seus.
Verstuurd van mijn U20i met Tapatalk

Categories

Resources