Hello I searched through the threads, bud didn't find anything that matched so here it goes.
I am working with a x10 mini pro, on which I have installed( bout a year ago) a cyanogen froyobread mod. Today I decided to update that, I downloaded flashtool and started working around it. Connected my phone and clicked on "Clean" by mistake, afterwards I think I clicked "cancel" , but I am not entirely sure.... anyways now my phone reboots all the time, when it loads up all of the apps crash ( for example "com.android.phone has stopped unexpectedly", launcher pro aswell) and a message appears - informing me that the applications system has failed.
I tried to troubleshoot this, even tried to install a new kernel and rom, but whenever I enter flashmode and attempt to continue the installation of the firmware, the phone itself disconnects from the process and continues on booting the cyanogen. What should I do. Any ideas ?
Also it seems that I am unable to enter recovery and fastboot.
EDIT: Found a way to fix it, but it restores to the original sony firmware( still better than bugged, right ?)
Here is a link: ww w.sonymobile .com/global-en/tools/update-service/ Just download and follow the steps
Yes, Thats true that app called SEUS on this forum. When you device bricked you can always restore it with seus.
Verstuurd van mijn U20i met Tapatalk
Related
I have just rooted my phone and installed xcyanogen v3.4 for the x10mini pro.
Everything worked fine, I have even managed to go into xRecovery after the installation and reinstalled xcyanogen three times.
This morning, I updated my Busybox from busybox installer from Market. Installed V1.19 busybox, I guess the previous one installed with cynogenmod6 was v1.15 then
The phone reboots suddenly, and hence after
*I only have an Unlock screen that works, displaying clock, charging stats, Sound off etc with NO SIGNALS
*If i unlock the screen, it will have a 'DSOmanager stopped Unexpectly force close' window followed by unlimited 'LauncherPro stopped Unexpectly force close' windows
*I am UNABLE to go into xRecovery to reinstall the system, unalbe to do anything now.
and the Phone reboots all the time automatically, but still get back to this unlock screen.
I am a newbie, any pros would help me pls? Thanks so much!
rccr said:
I have just rooted my phone and installed xcyanogen v3.4 for the x10mini pro.
Everything worked fine, I have even managed to go into xRecovery after the installation and reinstalled xcyanogen three times.
This morning, I updated my Busybox from busybox installer from Market. Installed V1.19 busybox, I guess the previous one installed with cynogenmod6 was v1.15 then
The phone reboots suddenly, and hence after
*I only have an Unlock screen that works, displaying clock, charging stats, Sound off etc with NO SIGNALS
*If i unlock the screen, it will have a 'DSOmanager stopped Unexpectly force close' window followed by unlimited 'LauncherPro stopped Unexpectly force close' windows
*I am UNABLE to go into xRecovery to reinstall the system, unalbe to do anything now.
and the Phone reboots all the time automatically, but still get back to this unlock screen.
I am a newbie, any pros would help me pls? Thanks so much!
Click to expand...
Click to collapse
Newbie too, and had the same problem, phone would boot into a low resolution mode (everything looked huge), followed by most applications and widgets crashing, I was lucky enough for the phone to forget the association with ADW Launcher and it allowed me to use the default home screen when launching it.
Now I'm in the process of repairing it using SEUS, need to charge up the phone before, is there's a way to fix this without having to lose everything? (Can't use the backup service)
rccr, try accessing safe mode, hold the menu key while it's booting.
Thanks!
Thanks! I have got to a post from xcyanogen forum, ways of recovering a 'killed device'. I was managed to flash back Sony Ericsson 2.1 using SEUS. Have installed back CyanogenMod6-v3.6, now everything working as before.
Help!!!!
Rccr can you please tell me the exact link?
You should never replace busybox on a custom rom or if ypy have xrec installed because they depend on their specific bysybox version!
Sent from my X10mini running on MiniCM 2.2.1 RC2 / aZuZu ZiG ZaG Alpha 0
Hey guys,
i have a very very big problem.
The X10i of my girlfriend restarts randomly the last weeks, so i decided to flash the new firmware using "Sony Ericsson PC Companion" (Germany).
So far no problems, i connected and updated the firmware, SEUS said "done, please disconnect and restart" and now the touchscreen is functionally only for about 5 - 10 seconds.
After this i can't press anything except the hard keys.
If I do nothing, the phone restarts.
I've already done the firmware update twice but no difference.
Can anybode help me?!
Thanks
-----------------
edit2:
Problem still there.
Sometimes I can use the touchscreen for a short period of time, but after a while there ist still the problem from the beginning.
-----------------
edit:
I've just used the Flash Tool to downgrade and upgrade the kernel.
Now it seems that there are no problems anymore.
I hope so.
goto http://forum.xda-developers.com/showthread.php?t=920746 and flah a 2.1 ftf file into the x10 and it should fix it.
If still not working send it to Sony Ericsson for a repair and make stutter you unroot your phone beforehand.
Sent from my X10 using Tapatalk
Flashing/Installing Miui 1.9.16 language pack
Thank you guys,
after rebooting the phone several times there isn't any problem with the touchscreen anymore.
I don't know what the problem was and if it will get back.
Maybe I will try your suggestion x10 2.2 user.
Now I have another question:
I've flashed a miui 1.9.16 rom and it's working like a charm.
But I can't using the language pack by saandur to change the rom language to german (my girlfriend isn't very familiar to the english language), I've tried all possible combinations of wiping the cache partition and dalvik cache before and after flashing.
My process was:
Stock 2.3.3. Android rom
-> used Flashtool to get root access
-> used Flashtool to install xRecovery
-> installed miui 1.9.16 rom using xRecovery
-> rebooted
-> wiped dalvik cache
-> flashed language pack
-> reboot
But in the settings I can only choose between english and chinese.
Any suggestions?
i have just got an xperia s, and unlocked the bootloader through sony's site today. i then flashed the pre-rooted firmware, the correct one for my model, and am stuck in a bootloop. I have had android phones before, and always been able to get out of messes like this, but sony's system seems to be somewhat different from my previous Moto. can anyone tell me how to possibly fix this? many thanks
Flash another firmware with flashtools.
Sent from my LT26i using Tapatalk 2
thanks, currently downloading the 73 version to test. I have an issue with flashtools though, and fastboot in general on my PC, the drivers do not seem to have installed, as when i try fastboot i get blue led for aprox. 5 seconds, then reboot into the bootloop. fastboot works fine on my mac though
Must install them manually. You open the device manager, right clicking on the S1boot, update drivers. Then shows you which folder is the drivers. and voila.
thanks, ive got it to boot again, and tried various roms, but keep having the same wierd issues. first, everytime i boot i have to go through the xperia setup completely from scratch again, as if the phone is brand new.
secondly, im using doomkernel v4a, and have installed the wifi modules as specified, but turning on wifi causes an instant crash and then reboot, sometimes immediately, sometimes after a short freeze
thirdly, somehow 'phone memory' is completely full, whatever i do. Internal memory, when the phone is completely empty, only shows as 25gb, but phone memory is totaly full, regardless of weather i clear app data/cache etc
any help would be greatly appreciated XD
hello,
you must flash doomkernel v1 or v1a , then after modules wifi for v1, before flashing v4a ,
(sorry for my bad english)
Hello I searched through the threads, bud didn't find anything that matched so here it goes.
I am working with a x10 mini pro, on which I have installed( bout a year ago) a cyanogen froyobread mod. Today I decided to update that, I downloaded flashtool and started working around it. Connected my phone and clicked on "Clean" by mistake, afterwards I think I clicked "cancel" , but I am not entirely sure.... anyways now my phone reboots all the time, when it loads up all of the apps crash ( for example "com.android.phone has stopped unexpectedly", launcher pro aswell) and a message appears - informing me that the applications system has failed.
I tried to troubleshoot this, even tried to install a new kernel and rom, but whenever I enter flashmode and attempt to continue the installation of the firmware, the phone itself disconnects from the process and continues on booting the cyanogen. What should I do. Any ideas ?
Edit: Also it seems that I am unable to enter recovery and fastboot.
Mod Message : Could you delete this, I unintentionally posted it in the wrong forum section. Thank you
Looks like you'll have to check THIS section... here, we talk about Xperia Mini Pro, not X10 Mini
Phone info:
Sony Xperia Tipo ST21i
Rooted
LOCKED Bootloader
Custom Firmware and Custom Rom: Gimlo
Xposed Framework Installed
Problem:
After my last reboot, phone is stuck at 'SONY' bootlogo. I am able to boot to CWM Recovery. On removing battery, phone would switch on automatically sometimes. But the main problem,, the phone doesn't go past the 'SONY' logo.
Edit: The phone charges(shows red led and the charging icon) on connecting to pc via usb.
'Might Be' Causes:
Everything had been working fine upto yesterday. Yesterday i was cleaning up my phone so..something might have happened yesterday. So all the things i did in chronological order(besides daily routine):
Uninstalled apps- Meme Generator Free, Township
Installed- Wakelock Detector and ran it once
Uninstalled Script- TweakDrypt(using Terminal Emulator)
enabled Xposed module for Greenify(free version)
Reboot!
And the phone has been like this since yesterday.
I haven't flashed any rom or anything..and i don't think it is a hard brick either..So will i have to use the flashtool to flash the stock firmware and rom?( I would like an alternative to preserve my data please!)
Solutions Tried:
→Google searches...only found suggestions regarding flashtool to flash the device stock
→At first, i went to CWM and took a nand backup of 'current state' of the phone. Then, I cleared cache and wiped dalvik cache. Rebooted, still it is stuck.
→Did a soft reset, "Power+volume up" until i get 1 vibration..and then released it..no effect.
→I make weekly nand backups of my phone..so i tried restoring last week's backup. Even then it is stuck! I don't understand why would that happen...
Please help...If i have missed out to mention any detail, please do tell and i will send it.
Sherl Holmes said:
Phone info:
Sony Xperia Tipo ST21i
Rooted
LOCKED Bootloader
Custom Firmware and Custom Rom: Gimlo
Xposed Framework Installed
.......
.
Click to expand...
Click to collapse
-_-..Could find no solution...Finally flashed stock ****.