Hi so i have this atrix and i want to root it and install a rom (i need powerswitchers in notifications bar and hdmi mirroring)
I dont know what version i have ,my phone is an european and the back has no att on it build number = 4.5.2a-74_ole-31.1 android version :2.3.4
So my question is what do i need to do to have the posibility to install roms do i need to unlock the bootloader and if yes whichi guide is the right one for me ?
In the past i had a moto defy and a htc desire z i rooted and flashed roms on both of them but this one is very different ,please help me
some one...?
Don't have the link handy, but I unlocked my international Atrix a couple months back on 2.3.6 GB and did it all following a step by step video on YouTube. Search for "Atrix Unlock Bootloader" ETC. The video that I followed was for the Canadian Bell version, but others claimed that it worked on other international versions too. The files/instructions you need are all in the video description too.
Basically in a nutshell, you are gonna install "IHOP" (AKA Pudding) there's threads for that here. That unlocks the BL, and you can start installing ROMs. After you do that, you'll probably want to install CM7 (which to the best of my knowledge has your HDMI Mirroring and other goodness). On a side note CM7 just released the "stable" version a couple of days back so your timing couldn't be better to do all of this...
Sent from my MB860 using XDA Premium App
thankyou now im going to search youtube
cosminmocan said:
thankyou now im going to search youtube
Click to expand...
Click to collapse
Good news I still have the video bookmarked on my computer and this is the video that I used.
It's a 4 part video and DEFINITELY WATCH ALL 4 PARTS BEFORE EVEN STARTING. Also as the video states, make sure your phone is fully charged. Couple of side notes, the guy used Win 7 in the video and I did this successfully on XP. Also he's on 2.3.4 and I still was able to do this on 2.3.6.
Finally I have an extra guide link that I used while watching the video. Anything that didn't make sense to me in the video, was cleared up in the guide.
With all of that, you and anybody else still needing to do this should be all set...
follow these instructions, i only just rooted, unlocked, and installed CM9 on my Atrix 4G (EU) yesterday, it worked perfectly!
http://forum.xda-developers.com/showthread.php?t=1302423
i already unlocked and installed the cm9 rom its great but i receive alot of force closes can i be the fact that i didnt do any ram fix ?
Related
Seen alot of blogs explaining how to update the android of Dell streak phones from AT&T and O2 but none for the Rogers with build number 7921.
Well i spent some time when i got my new phone to find out how to do it and to my surprise it was hard to find how to but easy to actually do it.
Only to follow 2 different site tutorials to get this done.
1. Follow the last part of the tutorial to get your streak to version 6601 ATT&T
after this phrase "If you just wanted to revert to O2 1.6 (build 4399) then you are done. If you are going to AT&T 1.6 (build 6601) we have to change the system so it will upgrade the the AT&T ROM."
http://forum.xda-developers.com/showthread.php?t=805112
once you got your streak to 1.6 ATT&T build 6601 you must follow a simple tutorial with interactive video and even has a video so you can make it work with your win7 X64 witch alot of tutorials don't help with.
2. Follow this part to the letter and if you have trouble they have a FAQ section and even supply all the files you need.
QDLTool Visual Tutorials (for Windows only)
http://streakdroid.com/?page_id=92
In this second part all you have to do in general is set up all your needed drivers and stuff in windows then open the program and press RUN. Just make sure you do all the steps without missing one.
No need to go through the fastboot or recovery menu in this part.
And it gives you Full US version of android 2.2 from a locked version of Rogers android 1.6.
Hope this will help my fellow Canadian Streakers
Thanks for Taking time to do this for fellow streakers
lufc said:
Thanks for Taking time to do this for fellow streakers
Click to expand...
Click to collapse
No problem. It's my first one ever so i hope i passed to hole point and helped some (dell irritated) people.
Actually, all you need is the 2nd step - QDLTool doesn't require any specific version installed on the phone.
Glad you like the visual tutorials .. let me know if theres anything I can do to improve them.
kantras said:
Actually, all you need is the 2nd step - QDLTool doesn't require any specific version installed on the phone.
Glad you like the visual tutorials .. let me know if theres anything I can do to improve them.
Click to expand...
Click to collapse
The only problem i have now is i can't seem to change or hear the notification when i go into the menu to see them.
Also i heard the gps doesn't work on some models but i haven't inserted the sim card because i'm waiting for the rebel to come in the mail but without the sim card the gps doesn't work for me.
The notifications setting and brightness are fixed in steves newest rom
Sent From My Rooted Dell Streak Using Xda App
ok i see i can upgrade to steve's 1.5.3 only thing is do i use the one with AMSS or the V2.1 baseband
I'm unlocking it with a Rebel simcard
In the guid (Beyond QDLTool) it says to use 1.5.3 + AMSS 1.5.1+. But i have read here and there that if your using the rebel simcard you have to use the No baseband one. So do i use the 1.5.3 no baseband and use the AMSS 1.5.1+ and follow all in the guide or do i juste use the 1.5.3 no baseband and skip the AMSS 1.5.1+ in the guide?
alexmoi said:
In the guid (Beyond QDLTool) it says to use 1.5.3 + AMSS 1.5.1+. But i have read here and there that if your using the rebel simcard you have to use the No baseband one. So do i use the 1.5.3 no baseband and use the AMSS 1.5.1+ and follow all in the guide or do i juste use the 1.5.3 no baseband and skip the AMSS 1.5.1+ in the guide?
Click to expand...
Click to collapse
im not 100% but i think you just need to flash the no baseband version thats it , you could ask that in the thread for that rom just to be certain
Hey...I have the rogers streak and was wondering if I update to dj steve's custom rom will i run into issues when the actual Rogers 2.2 comes out? Will I be able to put the stock version back on? I am a bit worried for warranty purposes as well...can it be brought back to stock or is it a one way ticket? Reason I ask is I also have several phones including a Rogers Acer liquid e and unfortunetly can't go back to the stock version of froyo because of some thing Acer and Rogers did in the update that recognizes the fact my phone was rooted and not running a rogers baseband or something like that...I just sold my Galaxy s because I was sick of dealing with Samsung and their issues....So from what I can tell Rogers is only releasing the froyo update in late spring and 3-4 months is crazy considering most of the other countries already have froyo on their streaks...Man Rogers is so bad for their updates...Anyways...can i temporarily update to the leaked versions or should I wait? Thanks
maek_it_happen said:
im not 100% but i think you just need to flash the no baseband version thats it , you could ask that in the thread for that rom just to be certain
Click to expand...
Click to collapse
you are correct. if you want to use the rebelsim, you HAVE TO use the no baseband version. 1.5.3 is the latest version
thanks for the great guide, I just got mine today and its already running 2.2 on 318 baseband
its true that u can qdl from any version though so I went straight from 1.6 to 2.2 prerelease then to 318 using the link in the streakdroid guide for beyond qdl
Sent from my Dell Streak using XDA App
Thanks to the OP, I updated my Rogers Streak from stock 1.6 to 2.2 to StreakDroid 1.6 yesterday!
Despite my reservations, it couldn't have been easier. I used the QDLTool to jump from 1.6 to 2.2 directly, and I then followed the additional instructions on the StreakDroid site to flash the rom. The hardest part was installing ClockworkMod Recovery prior to all that to do a rom backup. For some reason it took many tries to get it to hold, but eventually it worked.
Unfortunately I may be in the minority but I dislike the new homescreen layout. I still haven't found a way to get icons and widgets to stay close together like they did in the stock 1.6 version.
Hi guys,
I guess i have bricked the device while updating to 2.2.
As far as i know i have done nothing wrong i followed the Guide step by Step and Downgrade to AT&T firmware as the first guide in this post.
While i was running QLDtool it errored out and Turned off by itself. After since i have tried everything and the Device just Doesn't have power anymore. Pluging into wall socket is not giving anything either.
Any thoughts on this?? Any Help will be appreciated.
Archeob said:
Unfortunately I may be in the minority but I dislike the new homescreen layout. I still haven't found a way to get icons and widgets to stay close together like they did in the stock 1.6 version.
Click to expand...
Click to collapse
from what i understand, you need a launcher that can let you edit the number or rows and columns on each homescreen, im currently using launcher pro and have 8 columns and 6 rows in landscape. hope this helps as im a new user too so not sure if this is what you meant
rptw said:
from what i understand, you need a launcher that can let you edit the number or rows and columns on each homescreen, im currently using launcher pro and have 8 columns and 6 rows in landscape. hope this helps as im a new user too so not sure if this is what you meant
Click to expand...
Click to collapse
You're exactly right. I spent an hour reinstalling StreakDroid 1.6.0 with different DPI settings before giving up in frustration, but I found the settings menu for ADW the next day. I used a 6 x 6 grid and disabled automatic stretching, and that way my picture frames look perfect.
Great work on the rom guys! My Streak feels much more smooth and responsive than under stock 1.6.
Andy you shouldn't have a problem as long as you get a copy of the Update.pig you should be able to revert back.
Archeob said:
Thanks to the OP, I updated my Rogers Streak from stock 1.6 to 2.2 to StreakDroid 1.6 yesterday!
Despite my reservations, it couldn't have been easier. I used the QDLTool to jump from 1.6 to 2.2 directly, and I then followed the additional instructions on the StreakDroid site to flash the rom. The hardest part was installing ClockworkMod Recovery prior to all that to do a rom backup. For some reason it took many tries to get it to hold, but eventually it worked.
Unfortunately I may be in the minority but I dislike the new homescreen layout. I still haven't found a way to get icons and widgets to stay close together like they did in the stock 1.6 version.
Click to expand...
Click to collapse
Also check your density on the 1.6 streakdroid install. when i used us120 or denisty120- -160 they were to far apart. i also found that US180 didn't work the phone wouldn't boot. i had to use density180 vs us180 and everything is perfect. right amount of space. i installed just gingerbread stock launcher and im using the adw ex launcher its the best in my eyes.
cue_32 said:
Andy you shouldn't have a problem as long as you get a copy of the Update.pig you should be able to revert back.
Click to expand...
Click to collapse
Thanks...I still may wait though...I rooted my Acer liquid e and also just picked up a Samsung Captivate to play with and use as a back up..streak is so big...lol..nice to have a phone that fits in your pocket..... and since selling my GTi9000 i kind of missed it.....I love the streak and really don't want to void the warranty or better yet brick either...I am going to treat my captivate to the lagfix for now and maybe try gingerbread on my Liquid e...Been doing some reading and they are almost there...Still a few bugs however should not be long before they are worked out...As you probably noticed i love phones and have had like 30 phones in the last year...lol...Streak is my favorite so far...Have not touched my laptop much since i got it..Any news on when Rogers will come out with the official version of froyo? I read someone that April is the soonest? Anyone here anything else? I hope they come out with the update shortly ...otherwise I may be forced to root it...Any news would be appreciated..Cheers
umar.ranjha said:
Hi guys,
I guess i have bricked the device while updating to 2.2.
As far as i know i have done nothing wrong i followed the Guide step by Step and Downgrade to AT&T firmware as the first guide in this post.
While i was running QLDtool it errored out and Turned off by itself. After since i have tried everything and the Device just Doesn't have power anymore. Pluging into wall socket is not giving anything either.
Any thoughts on this?? Any Help will be appreciated.
Click to expand...
Click to collapse
Pull the battery out and put it back in.
If the streak looses power, it will be stuck in a power off state and plugging in the cord will do nothing.
After you reseated the battery, you should be able to charge the device again.
After it is charged, follow from where you left off.
Is any able to advise me if the Telstra version of the Atrix would have similar issues to the Bell OS, if I decided to load up Motobread, Ginger blur etc etc.
Staunch said:
Is any able to advise me if the Telstra version of the Atrix would have similar issues to the Bell OS, if I decided to load up Motobread, Ginger blur etc etc.
Click to expand...
Click to collapse
I may have missed something but i followed the steps to install gingerblur and well, it bricked my Telstra atrix that I only got yesterday
Luckily i made a backup of the telstra firmware as soon as i got it so its all good. Just got no idea on how to install CF. The telstra atrix i'm assuming is the same as the AT&T atrix because they are both "Motorola Atrix MB860" but i could be missing something
Uh oh, radio's and fingerprint reader aren't working
Oh, and it also wont turn itself off!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
You guys should probably be following instructions for the Bell Atrix. Bell users have been successful at flashing the telstra firmware and then installing grey/ginger blur and so I'd start there.
Hope it helps
DarkRyoushii
PS: OMG Atrix is released in Australia now? I should go find a telstra store and check out the differences, my Atrix that I've had since launch (from AT&T then unlocked) is the only one I've actually used so I'd love to see if the bugs in mine still exist in telstra's hahaha
EDIT: Oh and if u need a briefing. Bootloader Bypass has basically dropped off the radar and turned silent, probably still being worked on in private chats to avoid spam and offtopic posts. 2nd Init works (a different way to install custom ROMs however unable to modify kernel) but there are no ROMs developed yet, probably also being worked on in private chats if you are interested check out the freenode IRC #moto-atrix
All ROMs released as of writing are pseudoROMS that only theme and lightly modify the current OS
Thanks
DarkRyoushii said:
You guys should probably be following instructions for the Bell Atrix. Bell users have been successful at flashing the telstra firmware and then installing grey/ginger blur and so I'd start there.
Hope it helps
DarkRyoushii
Click to expand...
Click to collapse
I had a really bad feeling that that would be the case. Bell users appear to have a limited range of options compaired to the AT&T users. Now it seems that the Telstra users will have even less options than the Bell users.
I have at least managed to load HeLauncher, Pyramid & Fancy widgets tonight and now I've have more of the options that I wanted from the HTC desire sense UI.
Still trying to work out how to get my hands on the widget/live weather wallpaper that has that Super Cool looking windscreen wiper that clears the rain away.... Any ideas on how to get ahold of it?
Thanks again.
limited how? what version is your telstra rom? (wondering if its the same as the one that is already on this site)
as for the windshield wiper, that is from sense....oh i see you found the mock sense thread.
y2whisper said:
limited how? what version is your telstra rom? (wondering if its the same as the one that is already on this site)
as for the windshield wiper, that is from sense....oh i see you found the mock sense thread.
Click to expand...
Click to collapse
My system version is;
Version.4.1.47,MB860.Telstra.en.AU
Thanks for the info, I will start looking for the other one on this site.
So i can guess we can all agree that Telstra's Atrix cannot be flashed with custom ROM's from AT&T. I just tried it again tonight with different roms and all works up, shows "Ginger Blur" or whatever it is and then the red blinking failed boot and it just tries over and over to boot. I'm gonna flash back to OLYEM_U4_1.4.2_SIGNED_USAOLYEMTELSTRA_P029_A020_M005_HWolympus_1g_1FF and just sit and wait till something comes up unless someone's got something they wanna try
they should be able to flash using the gingerblur/greyblur guide by seven2009. you may not be able to deodex with the same instructions but installing should be fine, you would need to flash grey blur and factory reset the device before installing gingerblur.
If that route doesn't work you may need to start by flashing the french rom that is mentioned in that thread first.
makmegs said:
So i can guess we can all agree that Telstra's Atrix cannot be flashed with custom ROM's from AT&T. I just tried it again tonight with different roms and all works up, shows "Ginger Blur" or whatever it is and then the red blinking failed boot and it just tries over and over to boot. I'm gonna flash back to OLYEM_U4_1.4.2_SIGNED_USAOLYEMTELSTRA_P029_A020_M005_HWolympus_1g_1FF and just sit and wait till something comes up unless someone's got something they wanna try
Click to expand...
Click to collapse
You are doing better than me so far, but I must admit that going for custom ROM's has me a bit worried. I flashed my Nokia 5800 and it was better for looks and customisation, but it crashed alot. Then I jail breaked my iSheep (iphone 3G) and that was a little better than stock iOS, but it also crashed alot too.
I am hesitant to play around too much with the Atrix, simply because it's so new, and I was patient enough to wait for the Telstra release (instead of an imported AT&T version). However I found this thread that may shed some light on the topic at hand.
http://forums.whirlpool.net.au/forum-replies.cfm?r=29747620#r29747620
User "LeChuck" has some great knowledge and info about this Telstra firmware.
I am just not adventurous enough at the moment to have a crack at it. All I need to do, is find out how I could hard reset back to stock firmware if I don't like mods, then i'll give it a go. Even since rooted it over the weekend, I've notice3d more little issues each day I play around with things.
Can it be "Un-rooted" (is that an actual term used???) back to standard?
DarkRyoushii said:
You guys should probably be following instructions for the Bell Atrix. Bell users have been successful at flashing the telstra firmware and then installing grey/ginger blur and so I'd start there.
Hope it helps
DarkRyoushii
PS: OMG Atrix is released in Australia now? I should go find a telstra store and check out the differences, my Atrix that I've had since launch (from AT&T then unlocked) is the only one I've actually used so I'd love to see if the bugs in mine still exist in telstra's hahaha
EDIT: Oh and if u need a briefing. Bootloader Bypass has basically dropped off the radar and turned silent, probably still being worked on in private chats to avoid spam and offtopic posts. 2nd Init works (a different way to install custom ROMs however unable to modify kernel) but there are no ROMs developed yet, probably also being worked on in private chats if you are interested check out the freenode IRC #moto-atrix
All ROMs released as of writing are pseudoROMS that only theme and lightly modify the current OS
Click to expand...
Click to collapse
I have a buggy unlocked AT&T Atrix too and have been waiting for it to come out in OZ to flash it with either the Telstra Rom or something else. Can you (or anyone) make a suggestion?
procedure of installing custom rom
procedure of installing custom rom on atrix details are below.
system version: 45.0.20.mb860.telstra.en.au
model number:mb860
android versoin:2.3.4
basband version : N_01.100.00R
Webtop version: WT-1.20-133_23
Kernal version [email protected] #7
APflex version : GAS_Asia_usaolygbautel_p013,a012,m001
build number: 4.5.2A-74_OLE-20
shanitop_you said:
procedure of installing custom rom on atrix details are below.
Click to expand...
Click to collapse
You mean, you would like the procedure of installing a custom ROM on those specs? I would too.
It's mainly the BL unlock process I am not sure about on Telstra Atrix of the same spec. I'm comfortable with the rest.
Bought the atrix today and just wondering what rom options i have got and how easy is it to root etc, i previously had a galaxy s and the atrix is to be used as my second phone, iphone 4 currently as the main one. oh and i want a rom if possible to keep all the webtop options - got the hd multimedia dock keyboard etc package with it.
cheers
tragictramp said:
Bought the atrix today and just wondering what rom options i have got and how easy is it to root etc, i previously had a galaxy s and the atrix is to be used as my second phone, iphone 4 currently as the main one. oh and i want a rom if possible to keep all the webtop options - got the hd multimedia dock keyboard etc package with it.
cheers
Click to expand...
Click to collapse
Check the noob guide under "stickies" at the top, answers & advise is in there.
P. S. The Atrix as back up..?? :-$
Sent from my Motorola Olympus using XDA Premium App.
hi i have a uk orange atrix. rooting, unlocking bootloader, cwm recovery n flashing is rom is simple.
the ROM that i use is http://forum.xda-developers.com/showthread.php?t=1182545
more info :http://forum.xda-developers.com/showthread.php?t=1196747
it tells you how to ROOT, Unlock your bootloader ,install recovery n how to Flash a ROM.
The smoking android has a youtube channel where he shows this hands on. Pretty cool n useful if you are doing it for the first time.
ninhalo said:
hi i have a uk orange atrix. rooting, unlocking bootloader, cwm recovery n flashing is rom is simple.
the ROM that i use is http://forum.xda-developers.com/showthread.php?t=1182545
more info :http://forum.xda-developers.com/showthread.php?t=1196747
it tells you how to ROOT, Unlock your bootloader ,install recovery n how to Flash a ROM.
The smoking android has a youtube channel where he shows this hands on. Pretty cool n useful if you are doing it for the first time.
Click to expand...
Click to collapse
Likewise, I've just purchased an Atrix on Tmobile UK. I note reading this http://www.youtube.com/watch?v=IcgvglaXLyM that after rooting you can flash almost any rom including non international ones? Firstly is that correct? And if it is can I flash the official rom as detailed here http://www.motorola.com/Support/US-EN/Android_Products/ATRIX-4G_Software_Update_Page
Also are there any differences between the official rom and the R9 romv5. Soz if I've missed something in previous posts.
Hi all,
So I just picked up a Xperia Mini Pro today... pretty solid looking phone, performance is "average" w/ the stock ROM. This is my first Sony android, but I've rooted and flashed CM7 on many HTC and Samsung devices (i run a G2 and SGS myself)
Anyway, after spending the whole week reading up on this phone in XDA, i realize that there's one question that I can't seem to find any good info on.
Basically, I'm never gonna use this phone on stock ROM (that's just silly) and I'm gonna flash to CM7 like my other phones
I'm a bit confused as to which method is the more "proper" way.
What's the recommendation of anyone who has the SK17i/a?
do I use the FlashTool method (http://forum.xda-developers.com/showthread.php?p=10879507#post10879507)
or do I use the method provided in the wiki from the cyanogenmod site? (http://wiki.cyanogenmod.com/wiki/Sony_Ericsson_Xperia_Mini_Pro:_Full_Update_Guide)
The only important steps are really: rooting, unlocked BL and install CMW ... flashing CM7 is prob the easiest step of all
I'm comfortable doing either way, both instructions seem pretty straight forward and clear-cut ....but i just wanted to know which one I should be using to make this process a bit smoother for me
I just bought this phone yesterday and love it, but it does seem to be crammed with too much rubbish. this is my first android phone. I've rooted it, but still trying to decide whether to flash to CM7 (i've had iphones before and i'm guessing CM7 is the android version of Custom Firmware) Are there any step by step guides for THIS phone on flashing to CM7 as i'm still learning about android handsets.
hi.. i am also new to SE Xperia Mini.. and i am a former Samsung Galaxy 5 user.. i used to have a a CM7 in my galaxy 5.. and flashing on a samsung phone was easy..
i'm would also want to see a step by step guide on flashing.. thanks..
so, it didn't take long for me to realize that CM7 just doesn't work that great for this particular phone
... Feel free to read up on the known issues (ie: no hardware keyboard support)
Anyhoo...I updated my firmware and flashes hybrom v8...great looking ROM
"there is no spoon"
I know that every method works for each version of your android system, I rooted my phone, I guess the next step is to install the boot Menu Manager, I am new @ motorola phones, I come from Samsung Droid Charge, I would like to install a fully working debloated rom, I currently have the latest update 4.1.2.
I am lost, but I know I have root, I just checked with root checker.
Please help me !!
Hi. Go to your browser and install safestrap 3.11. After that, just find a ROM and follow instructions. There's a guy named Tom on YouTube who has some good 'how-to' videos. Don't use ROM manager or ROM toolbox. They arent very reliable or up to date. Titanium backup is a good purchase that helps. Have fun and whatever you do, keep and backup your stock ROM!
Sent from my DROID RAZR using Tapatalk 2
D-WIZ can satisfy your requirement.Stable,smooth,best battery life,no bugs.
My english is bad....Or even worse than bad....
jorge3687 said:
I know that every method works for each version of your android system, I rooted my phone, I guess the next step is to install the boot Menu Manager, I am new @ motorola phones, I come from Samsung Droid Charge, I would like to install a fully working debloated rom, I currently have the latest update 4.1.2.
I am lost, but I know I have root, I just checked with root checker.
Please help me !!
Click to expand...
Click to collapse
you just check out droidrzr.com they are dedicated to xt 912 cdma and have lots of good support and live chat support as well. incase nobody helps you here
Is ROM Toolbox still a good/safe app for debloating my stock ROM?
I came from an HTC Thunderbolt and this phone is already very different.
Also, does anyone know of an EXTREMELY STABLE ROM that is 4.2.2 Jelly Bean for this XT912?
i wouldnt suggest using rom tool box. motorola have locked bootloaders things are done differently with them while samsung and htc and others have unlocked bootloader. this is where motorola gets tricky the website i referred to you have an active chat and lots of good support if you post there. somebody will respond to you fast.
razr is kind of dead in forums because of how difficult motorola is development. it really is painful.
naifs_br10 said:
i wouldnt suggest using rom tool box. motorola have locked bootloaders things are done differently with them while samsung and htc and others have unlocked bootloader. this is where motorola gets tricky the website i referred to you have an active chat and lots of good support if you post there. somebody will respond to you fast.
razr is kind of dead in forums because of how difficult motorola is development. it really is painful.
Click to expand...
Click to collapse
I kinda figured it was.
Having to use the Smart Actions app during the root process is what made me think... wtf? Lol.
Check out the CM 10.1 and Avatar ROMs is you are going for a Jelly Bean rom. So far i have liked them. FYI, i just rooted my razr a few weeks ago as well. I am loving it. :laugh: