Greetings!
I have this issue, my tablet has been failing so bad these days, so i had to format about 5 times in a row in the week, after the last try it seem it was back to normal until i got a frozen screen and had to reboot with the button to it.
Anyways, the problem is, that even that doesn't bothers flashing it -i figured was because a bad configuration with titanium backup so i decided to restore only data this time- but my surpise cam out when it couldn't get pass after the android startup to the logo screen of the ROM.
I thought something got damaged so i downgraded to GB but that worked fine, so i decided to try again with ICS but no luck -it's the same ROM i have been using since i bought the tablet-.
Any ideas on this? Thanks in advance
Aditional info:
Model: Momo9 -A10 cortex based-
ROM: Oficial 4.0.3 ICS form ployer
Flash tool: Livesuit
Related
Hello,
After tons of downloaded ROM's and weeks of webpages reading I' am still stuck in unbricking my Chinese tablet. These are my system specs:
Model: SAWEE10
Android: v2.3_20110926
Kernel: 2.6.32.9
Build: FRF85B
Mainboard: WWE101-MAIN (ver 3.4 2010/11/19)
Charger: 9V
No matter which version of ROM I have tested my device remains stuck at "Updating Image Linux-2.6.32.9" using a MicroSD prepared with WinHEX. Also the USB conection doesn't work anymore. It does start but freeze at Android green logo even if I left it for days. Can anyone help me with a correct ROM and flashing steps for this model? Many thanks in advance.
go back to where you purchased your tab from and download the rom for you tablet. the SAWEE10 is false.. i ran across that the software is a false positive.. the Tab is a 2.2 system not 2.3.. if it had superpad on the box it is a clone running on a unstable rom version from Ibex who makes the real flytouch 3. the best thing is to see if the seller have the original rom to flash your tablet.. i returned mine back and purchased a real system like acer iconia 500 from a box store.. have no problems since..
hope that helped..
Yes it's a pathetic clone and it seems that I have installed a wrong ROM version; also I wasn’t smart enough to make a copy of the original ROM (of course, my fault).
I have tried most of the ROM's present on the forums but the flashing operation freeze on "Updating Image Linux-2.6.32.9" and I don't know why. I have used the Flytouch ROM recovery, with WinHex SD formatting, and those images (ramdisk, system, userdata, etc) but doesn't work. Can be this Linux image writted separately?
try this it may help
androidtablets.net/forum/superpad-ii-firmware/12403-firmware-releases-firmware-files-benefits-bugs-flytouch2-v2-superpad-2-a.html
androidtablets.net/forum/gome-flytouch-ii-firmware/16530-rom-guide-superpad-flytouch2-wwe10-android-2-2-v2-1-3925-usb-flashing.html
poke around there you might find something
I bought my hipstreet flare 2 months ago, 1 night when i was using skype, it froze then i restarted it then it got a boot loop(android logo keeps on repeating its self) CAN ANY ONE HELP ME HOW I CAN FIX THIS ?? thanks
not an expert but just might work
Mussa34 said:
I bought my hipstreet flare 2 months ago, 1 night when i was using skype, it froze then i restarted it then it got a boot loop(android logo keeps on repeating its self) CAN ANY ONE HELP ME HOW I CAN FIX THIS ?? thanks
Click to expand...
Click to collapse
i know this might be a bit late but i came across your thread here and id like to kindly offer my two cents, boot the tablet into recovery mode, search online as too what buttons you will need to hold while booting to make it go into this mode; as its different for some devices. from there wipe the cache and such this should be a factory restore, it will leave your files such as photos but all apps and not pre installed software will be cleared from the system enabling a clean boot.
Rom
yeah, I followed a thread which was to install a new rom which is incompatible with the flare and it's now bootlooping on CWM. I think i need the stock rom to flash and then it should be fixed! I just need the .zip to flash, or just any rom compatible with the flare.
Good Evening/Hello/Hi,
I own a Samsung Galaxy S III GT-i9300 International Version. I recently started experimenting with roms and cwm and i think i ended up in a dark tunnel. I rooted my phone and installed clockwork (cf auto root) and then tried installing KitKat Rom 4.4 but kept failing each time i entered recovery and tries to flash it. by reading other posts it was suggested to use a higher version of cwm as i was using a 5.0.4.6 version. after trying a later version the rom flashed and also the gaps without any problem. however after booting i realized i had no service, but the phone seemed ok. i decided to flash modem_XXDME4 and Modem DDEMG2 in recovery after reading some posts to get signal back. that's when the trouble started, when the phone rebooted i could not get pass the setup screen to select language, touch is not responding up to this time, i reflashed stock rom, it booted and still no touch , cant get pass the start screen of the language selection. my phone never fell and the creen has no sign of falling. any help would be greatly appreciate.....:crying::crying:
Thank You
I have an Android phone karbonn a1+ HW ver-3.0.0, SW Ver-2.0.2.
I am a noob but like to experiment.
My phone was rooted and was working on stock firmware as there is not good firmware available for it (After trying several firmware i found only 1 custom was working that too was not good so i reverted back to stock and did some tweaking). It has CWM recovery installed.
Some stupid thing i did before it got bricked.
1- I tried to change font but phone became dead and i used some files to change them but that did not work so i restored my backup.
2- After restoring my backup some crazy ideas struck me, i again wanted to try those custom firmware. As normal restore of (those FW files are backup file) those were not working i tried advanced restored and restored files one by one (img, boot, system etc). After that my phone is dead.
I can enter into Recovery mode, can flash files, can restore backup which are not giving me any error but the phone is not starting. Even my backup files are not working. When i am connecting my phone to PC it is going into a bootloop. (first karbonn logo --then a white screen with vertical lines--then restart again). I am trying for last 15 days days to make it running again but it is not.
KINDLY HELP:crying::crying::crying::crying:
Hi, thank you for using XDA Assist. i'm sorry but there is very little information about your device on XDA. I'm going to ask a moderator to move your post to here, http://forum.xda-developers.com/android/help Hopefuly someone with your device will see it and be able to help.
Good luck!
Earlier today, I downgraded the firmware from my straighttalk galaxy s3 from stock H2 to H1 and then proceeded to root it, which went fine. After this, I installed CWM recovery and cyanogenmod, once I booted into cyanogenmod, I ran into a bug/glitch which didn't allow my rom to use my mobile data, so after that, I installed android revolution hd. This is where I ran into my problem, I went into CWM and factory reset my phone and wiped all caches, after this I proceeded to install android revolution HD, only to find out that it only shows a black screen, I also cannot use adb, but my computer still recognizes my phone as connected.
PS:
If I leave the battery out and plug in the USB, I get a brief solid red light
The phone WILL NOT go into recovery or download
No boot screen or error
Any and all help you guys can offer is well appreciated as I was not expecting this to happen
Hello imjimbob,
I think your LCD is broken. :crying:
Can you tell me a bit more please, and is there any way to fix it?
How would my phone screen break from flashing a ROM?