I have an Android phone karbonn a1+ HW ver-3.0.0, SW Ver-2.0.2.
I am a noob but like to experiment.
My phone was rooted and was working on stock firmware as there is not good firmware available for it (After trying several firmware i found only 1 custom was working that too was not good so i reverted back to stock and did some tweaking). It has CWM recovery installed.
Some stupid thing i did before it got bricked.
1- I tried to change font but phone became dead and i used some files to change them but that did not work so i restored my backup.
2- After restoring my backup some crazy ideas struck me, i again wanted to try those custom firmware. As normal restore of (those FW files are backup file) those were not working i tried advanced restored and restored files one by one (img, boot, system etc). After that my phone is dead.
I can enter into Recovery mode, can flash files, can restore backup which are not giving me any error but the phone is not starting. Even my backup files are not working. When i am connecting my phone to PC it is going into a bootloop. (first karbonn logo --then a white screen with vertical lines--then restart again). I am trying for last 15 days days to make it running again but it is not.
KINDLY HELP:crying::crying::crying::crying:
Hi, thank you for using XDA Assist. i'm sorry but there is very little information about your device on XDA. I'm going to ask a moderator to move your post to here, http://forum.xda-developers.com/android/help Hopefuly someone with your device will see it and be able to help.
Good luck!
Related
I'm absolutely furious, I was restoring backup contacts from my old phone in titanium, rebooted my device and now it's stuck on the boot screen. Ridiculous.....
Anyway, the stock recovery is 100% chinese so useless. There isn't much info about on how to install CWS on this device by PC. Can anyone direct me to how to do this plus any guides, and also where I might be able to find a copy of the stock ROM so I can reinstall it?
Hi guys, new to the forum, but been reading for a while now.
I need some help with my gf's device which i got messed.. So here is the problem:
Device: Alcatel One Touch S'Pop (4030x)
Carrier: Globul(Bulgarian)
Root: YES
SU Status: Installed SuperSU
Stock firmware: latest ver of Android JB 4030x modded for globul
Recovery: Selfmade CWM.
So the problem is that the device was stock and sim locked by carrier globul, what i was trying to do is root inastall cust recovery and install new rom, hoping that this will debloat the device and eventualy sim unlock it, now i am stuck with a white screen every time i try to boot it, juat after the first boot animation. Tried to go to recovery - work flawlessly. Tried re-installing the custom ROM several times with no luck.. Here is what i done:
Rooted with VRoot, then installed CWM recovery via MTK Droid Root & Tools, all worked fine, the stock (rooted) ROM booted with no problems at all (restarted couple o times)
Then i downloaded to my SD the last version of GE-Rom from MXDevelopers blog and tried to flash it via recovery, following their guide(only difference that i used CWM instead of TWRP) everything went well and nice, then i pressed "Reboot device now" option in the recovery and it rebooted, shown the 1st bootlogo and than that white screen (ofdeath) and it doesn't do anything except when i press volume down and hold it, it vibrates as when you switch silent mode on with the vol keys, also i noticed that the power button works as supposed (locks unlocks).
What i need to do is getting a custom rom working on the device, or at least a stock (non globul) rom working on it..
I tried to flash thru recovery the X9 ROM in hope it will do the job but null... I tried several times to install and re install the rom with no succes so far. What i am thinking is that i somehow damaged the boot image ( i havent touched it but i dont know if the custom rom had tried to modify it. )
Please help!!
Will click the thanks button, i promise
If anything in the given information is unclear, just ask and i will clear it for you, or in case i haven't given enough info on something..
C'mon guys.. Why nobody posting ? I followed the help request guide, i made clear what the problem is and i've given all the information that is avail. ...
I mean.. Please help, any help, advice or whatever will be highly apreciated.. You see, i'm new here but if there is something i can help with - then i will do it.. I know that some devs here do have got that model of alcatel..
I had a very similar problem to yours and
Only resolved it today. Go into XDA and search
Bricked Alcatel 4030. Wergi1 has the solution
Well it worked for me good luck.
Developers in the house, I need your help on how to remove cwm on my tecno l3 ie returning it to stock or how I bought it. I have a stock rom dump from a friend. I have rooted the phone and flashed it with cwm but before doing it I did a backup which was having a .backup extension and hard reset the phone. After the installation of the cwm, I couldn't use the backup again. The only thing that I need from the backup file are my contacts and messages. I have tried all my best to extract from this backup but no success. PS: I hard reset my phone and then rooted it because it was locked due to wrong pattern by a friend, so the backup I made before resetting still contains the settings. Anyway to go about this? I will surely appreciate all suggestions and solutions. Thanks.
your new guy,
kayode
TECNO F6 SAME ISSUE and ALSO BRICKED
kayusgold said:
Developers in the house, I need your help on how to remove cwm on my tecno l3 ie returning it to stock or how I bought it. I have a stock rom dump from a friend. I have rooted the phone and flashed it with cwm but before doing it I did a backup which was having a .backup extension and hard reset the phone. After the installation of the cwm, I couldn't use the backup again. The only thing that I need from the backup file are my contacts and messages. I have tried all my best to extract from this backup but no success. PS: I hard reset my phone and then rooted it because it was locked due to wrong pattern by a friend, so the backup I made before resetting still contains the settings. Anyway to go about this? I will surely appreciate all suggestions and solutions. Thanks.
your new guy,
kayode
Click to expand...
Click to collapse
Hello there developers. I also i'm experiencing same issue but in a different device. I'm using Tecno F6 and install CWM but then i never new if resetting it in a normal way of going through SETTINGS > BACKUP & RESET could cause problems..so the next thing i found my device acting weird during the process of formatting so believing i'm saving the phone from further injury i decided to disconnect the battery and then i turned it on and there it is..HOME button doesnt work, notification panel doesnt show nothing, and if i hold power button it only brings two options, REBOOT and SHUT DOWN while at first it had so many options. Please help..i must have tampered the OS i believe :'(
Hello people.
I have KINGZONE SM-N9002 (Clone of Samsung Galaxy Note 3) MTK6582 and today I tried to install this ROM (Android 4.4 KitKat) -> needrom.com/download/am3-kk-v1-0-for-kingzone-sm-n9002 . I did everything, wiped data/cache/ everything I needed to and installed it . Then clicked on Reboot, and what happened is that my phone doesn't reach the menu, it just reboots showing the logo screen every time constantly!!!! I clicked on restore on Recovery mode, but it seems there are no files there. I tried to to reflash my ROM using this -> needrom.com/download/kingzone-sm-n9002-mt6582 but when I do it using Flash Tools, I get the error Invalid scatter file format. Please help! I'm in terrible need of my phone and since it is a clone, I will have to send it back to China and wait ages for it get back. Plus, I'm leaving for Scotland in two weeks time so I'm in desperate need of my phone. I cannot do anything!!! I have Flash Tools and MTK Droid Tools on my PC, so can you suggest anything that can save me????
I finally managed to flash my ROM using SP Flash tools but now my screen shows something like green pixels and it doesn't respond to anything!!!! It's like my display is completely "broken".... Please help!
Thank you for reading this thread.
Dear XDA members,
I tried rooting my device "ASUS_X01AD" 3days ago. But somehow i failed and brick my phone.
Googled a way to unbrick and manage to boot it back but it was not my original ROM.
So i tried download other Custom ROM and Stock ROM,
Pixel Exp (Flashed and stuck in bootloop (not fastboot loop)
Havoc (Failed to flash)
Cherish OS (Flashed and stuck in bootloop (not fastboot loop)
After that i use this (https://www.asus.com/my/mobile/phones/zenfone/zenfone-max-m2/helpdesk_bios/)
But after that i notice i have some problem with it, IMEI unknown and without android 10 update the device wont get wifi turn on.
Im not sure if i did any wrong in following guides, But please help me with my favourite device.
Almost all guides i already follow in XDA threads but maybe i miss some steps,
Also try to enable diag *#3424#* but my pc wont detect unless i boot it up with Volume + & - qualqom usb will detect but still i cant use qfil qcn restorer option
The reason why i want to root it because i want to recover my internal storage data with data recovery.
Been using this device 5 years ago .
Thank you again for reading my thread.