I'm absolutely furious, I was restoring backup contacts from my old phone in titanium, rebooted my device and now it's stuck on the boot screen. Ridiculous.....
Anyway, the stock recovery is 100% chinese so useless. There isn't much info about on how to install CWS on this device by PC. Can anyone direct me to how to do this plus any guides, and also where I might be able to find a copy of the stock ROM so I can reinstall it?
Related
Hello, im new to the forum. I did a lil' search here to find a solution to my problem before i published the post but couldnt find anything.
Well i accedently did a factory restart without a nandroid backup on my htc one x+.
now im stuck with no OS on my phone and all i can do is bootload.
i would like to install any rom (Stock RUU or anything else) that will turn my phone usefull again,the main problem is that even though the computer recognise the phone ( ichecked through fastboot devices) my win 7 dont see it, so i cant copy any rom files to my internal storage, so i cant install any rom that i found here.
im using TWRP recovery (can install CWM if it takes) and hoping someone can guide me through the rest.
Thanks in advance, Alex.
Well after some time spent digging in the internet i have maneged to push the rom files (revolution hd) through 'adb push'.
The thread can be locked : )
Developers in the house, I need your help on how to remove cwm on my tecno l3 ie returning it to stock or how I bought it. I have a stock rom dump from a friend. I have rooted the phone and flashed it with cwm but before doing it I did a backup which was having a .backup extension and hard reset the phone. After the installation of the cwm, I couldn't use the backup again. The only thing that I need from the backup file are my contacts and messages. I have tried all my best to extract from this backup but no success. PS: I hard reset my phone and then rooted it because it was locked due to wrong pattern by a friend, so the backup I made before resetting still contains the settings. Anyway to go about this? I will surely appreciate all suggestions and solutions. Thanks.
your new guy,
kayode
TECNO F6 SAME ISSUE and ALSO BRICKED
kayusgold said:
Developers in the house, I need your help on how to remove cwm on my tecno l3 ie returning it to stock or how I bought it. I have a stock rom dump from a friend. I have rooted the phone and flashed it with cwm but before doing it I did a backup which was having a .backup extension and hard reset the phone. After the installation of the cwm, I couldn't use the backup again. The only thing that I need from the backup file are my contacts and messages. I have tried all my best to extract from this backup but no success. PS: I hard reset my phone and then rooted it because it was locked due to wrong pattern by a friend, so the backup I made before resetting still contains the settings. Anyway to go about this? I will surely appreciate all suggestions and solutions. Thanks.
your new guy,
kayode
Click to expand...
Click to collapse
Hello there developers. I also i'm experiencing same issue but in a different device. I'm using Tecno F6 and install CWM but then i never new if resetting it in a normal way of going through SETTINGS > BACKUP & RESET could cause problems..so the next thing i found my device acting weird during the process of formatting so believing i'm saving the phone from further injury i decided to disconnect the battery and then i turned it on and there it is..HOME button doesnt work, notification panel doesnt show nothing, and if i hold power button it only brings two options, REBOOT and SHUT DOWN while at first it had so many options. Please help..i must have tampered the OS i believe :'(
I have an Android phone karbonn a1+ HW ver-3.0.0, SW Ver-2.0.2.
I am a noob but like to experiment.
My phone was rooted and was working on stock firmware as there is not good firmware available for it (After trying several firmware i found only 1 custom was working that too was not good so i reverted back to stock and did some tweaking). It has CWM recovery installed.
Some stupid thing i did before it got bricked.
1- I tried to change font but phone became dead and i used some files to change them but that did not work so i restored my backup.
2- After restoring my backup some crazy ideas struck me, i again wanted to try those custom firmware. As normal restore of (those FW files are backup file) those were not working i tried advanced restored and restored files one by one (img, boot, system etc). After that my phone is dead.
I can enter into Recovery mode, can flash files, can restore backup which are not giving me any error but the phone is not starting. Even my backup files are not working. When i am connecting my phone to PC it is going into a bootloop. (first karbonn logo --then a white screen with vertical lines--then restart again). I am trying for last 15 days days to make it running again but it is not.
KINDLY HELP:crying::crying::crying::crying:
Hi, thank you for using XDA Assist. i'm sorry but there is very little information about your device on XDA. I'm going to ask a moderator to move your post to here, http://forum.xda-developers.com/android/help Hopefuly someone with your device will see it and be able to help.
Good luck!
[Q] Lenovo S90C - Bricked - Need Help
Hello !
I have Lenovo S90C (fake obviously) MTK6582 Octa Core 4G RAM (or so it was said on AliExpress. I just recently discovered that's not true) DoubleSIM and almost none of ROM (I could only install about 5 apps. I couldn't even make backup with MtkDroidTools etc. and modify the EBR Files, because there's not enough space for backup, it didn't work even if I tried with SD card).
Then I found a ROM on the internet where it was written in the comments that it suits my smart phone. So I tried to flash it on with SP FlashTool. And now my phone is bricked. At first it showed some coloured stripes and vibrated at the startup, but it never booted. I couldn't even get it to the recovery mode.
To this point, computer recognized the phone when it was connected. So I tried to flash a ROM again. From this attempt on, it doesn't work at all. It's totally bricked. I can not turn it on, go to the recovery mode, enter boot menu, nothing. Even computer doesn't recognize it.
Link to ROM I tried: needrom.com/download/alps-k500/
Link to phone I bought: aliexpress.com/snapshot/6662334714.html?orderId=67204220302389
So my question is; could you guys help me with getting the right ROM, with sufficient amount of internal storage.. I would also be grateful if you would help me with un-bricking the phone. I can't even get to the kernel boot menu, computer won't recognize it even with all the drivers installed and that concerns me a lot.
I would need it ASAP. Thank you all! :good:
I think you need a YunOS rom
Hi Folks,
The Phone is stuck at Nubia Logo, and just stays there. TWRP was successfully installed and phone was rooted. Before actually loading the update package, i performed a wipe (delvik, system, data) and flashed a Stock Recovery. It prompted for Reboot which i did and the bad luck started.
Now, Vol-Up+Power boots into stock Recovery but unfortunately i do not have a backup nor an official Nubia ROM for the handset & hence can't do anything. Vol-Down+Power boots into Bootloader in which all the options pretty much take me back to Stock Recovery.
I know i made a stupid mistake but it would be really really helpful if anyone could please help put an end to my misery and undo this error. I have already tried discharging completely and then trying to power it back on again but to no avail.
Thanks in advance
Guys, a little help here please!!
My laptop does not recognize the device, it doesn't even appear when connected via USB Cable, although it charges alright.
I tried installing Nubia Recovery Tool but unfortunately it was in Chinese and I could not understand one word of it.
Please HELP!!
Hi Goraya,
I get a lot of answers from Pesa1234, hi is from Italy so his English is not that good.
I use the ComboRom 4.2 and in principle it is good, although I don't have fast charging.