[Q] Lenovo S90C - Bricked - Need Help
Hello !
I have Lenovo S90C (fake obviously) MTK6582 Octa Core 4G RAM (or so it was said on AliExpress. I just recently discovered that's not true) DoubleSIM and almost none of ROM (I could only install about 5 apps. I couldn't even make backup with MtkDroidTools etc. and modify the EBR Files, because there's not enough space for backup, it didn't work even if I tried with SD card).
Then I found a ROM on the internet where it was written in the comments that it suits my smart phone. So I tried to flash it on with SP FlashTool. And now my phone is bricked. At first it showed some coloured stripes and vibrated at the startup, but it never booted. I couldn't even get it to the recovery mode.
To this point, computer recognized the phone when it was connected. So I tried to flash a ROM again. From this attempt on, it doesn't work at all. It's totally bricked. I can not turn it on, go to the recovery mode, enter boot menu, nothing. Even computer doesn't recognize it.
Link to ROM I tried: needrom.com/download/alps-k500/
Link to phone I bought: aliexpress.com/snapshot/6662334714.html?orderId=67204220302389
So my question is; could you guys help me with getting the right ROM, with sufficient amount of internal storage.. I would also be grateful if you would help me with un-bricking the phone. I can't even get to the kernel boot menu, computer won't recognize it even with all the drivers installed and that concerns me a lot.
I would need it ASAP. Thank you all! :good:
I think you need a YunOS rom
Related
*Urgent* Bricked S3(gt9300)? Accidentally wiped my s3 (in allianz rom bootloader screen) .* It then vomplrtely wouldn't work, so I used odin to put a stock rom on (via pda)* Success ! working completely fine until it lost power & will only ever get as far as the samsung logo when turned on. Need urgent diy help to get my phone working again,* I have tried a number of how-to's on fixung a bricked s3 via odin with no luck!* the error message is along the lines of no partion available & will fail no longer than 2 seconds into process. no matter what rom ; custom or stock Im unable to fix.* My guess would be that ive deleted whatever software in phone that would recognise a rom. Notes: I am competant in use of android just very good at making mistakes.* The only feature available is the download usb mode. Any help would be appreciated especially if it works, Im sure someone else has had the same problem!
Hi there, I had a s4 clone here with MTK6572. I dont remember exactly what is my specification. All I remembered is I only have a scattered file without factory ROM (I got this when I try to backup, but the rom isnt backup yet, I upload it here).
Problem :
I try to reflash the ROM, but now my phone cant be turned on (neither factory mode, fastboot mode and recovery mode).
But when I try to reinsert the phone to PC, it still can be connected (I hear then sound when the device is connected).
The main problem is : When I try to reflash the ROM now (format, memory test, or download), it always shows DRAM_FAIL,, can someone help me here?
I already search and explore the other thread, but still didnt work.
I already try with any NAND rom and EMMC rom, and still stuck. My phone cant be turned on.
Sorry for my bad english.
Hello people.
I have KINGZONE SM-N9002 (Clone of Samsung Galaxy Note 3) MTK6582 and today I tried to install this ROM (Android 4.4 KitKat) -> needrom.com/download/am3-kk-v1-0-for-kingzone-sm-n9002 . I did everything, wiped data/cache/ everything I needed to and installed it . Then clicked on Reboot, and what happened is that my phone doesn't reach the menu, it just reboots showing the logo screen every time constantly!!!! I clicked on restore on Recovery mode, but it seems there are no files there. I tried to to reflash my ROM using this -> needrom.com/download/kingzone-sm-n9002-mt6582 but when I do it using Flash Tools, I get the error Invalid scatter file format. Please help! I'm in terrible need of my phone and since it is a clone, I will have to send it back to China and wait ages for it get back. Plus, I'm leaving for Scotland in two weeks time so I'm in desperate need of my phone. I cannot do anything!!! I have Flash Tools and MTK Droid Tools on my PC, so can you suggest anything that can save me????
I finally managed to flash my ROM using SP Flash tools but now my screen shows something like green pixels and it doesn't respond to anything!!!! It's like my display is completely "broken".... Please help!
This phone was stuck at Haier logo. I think this is W718J because it came with android 4.2. I tried a factory reset and now the phone cannot boot at all. No logo, no ability to get into the reset area with volume down and power button. I have tried more than one rom and tried to get the phone working with SP Flash tools but run into errors every time. I have installed the drivers and the pc recognizes the phone in the ports section of the device manager. I have tried many roms, and set the scatter file and then during the download process I get various errors. I have researched this problem for hours on this website and others but think I may doing something wrong. Can any one tell me the exact procedure to fix this phone? And do I need to have the sim card in the phone during these processes. Thank you in advance.
Thank you for reading this thread.
Dear XDA members,
I tried rooting my device "ASUS_X01AD" 3days ago. But somehow i failed and brick my phone.
Googled a way to unbrick and manage to boot it back but it was not my original ROM.
So i tried download other Custom ROM and Stock ROM,
Pixel Exp (Flashed and stuck in bootloop (not fastboot loop)
Havoc (Failed to flash)
Cherish OS (Flashed and stuck in bootloop (not fastboot loop)
After that i use this (https://www.asus.com/my/mobile/phones/zenfone/zenfone-max-m2/helpdesk_bios/)
But after that i notice i have some problem with it, IMEI unknown and without android 10 update the device wont get wifi turn on.
Im not sure if i did any wrong in following guides, But please help me with my favourite device.
Almost all guides i already follow in XDA threads but maybe i miss some steps,
Also try to enable diag *#3424#* but my pc wont detect unless i boot it up with Volume + & - qualqom usb will detect but still i cant use qfil qcn restorer option
The reason why i want to root it because i want to recover my internal storage data with data recovery.
Been using this device 5 years ago .
Thank you again for reading my thread.