Hello people.
I have KINGZONE SM-N9002 (Clone of Samsung Galaxy Note 3) MTK6582 and today I tried to install this ROM (Android 4.4 KitKat) -> needrom.com/download/am3-kk-v1-0-for-kingzone-sm-n9002 . I did everything, wiped data/cache/ everything I needed to and installed it . Then clicked on Reboot, and what happened is that my phone doesn't reach the menu, it just reboots showing the logo screen every time constantly!!!! I clicked on restore on Recovery mode, but it seems there are no files there. I tried to to reflash my ROM using this -> needrom.com/download/kingzone-sm-n9002-mt6582 but when I do it using Flash Tools, I get the error Invalid scatter file format. Please help! I'm in terrible need of my phone and since it is a clone, I will have to send it back to China and wait ages for it get back. Plus, I'm leaving for Scotland in two weeks time so I'm in desperate need of my phone. I cannot do anything!!! I have Flash Tools and MTK Droid Tools on my PC, so can you suggest anything that can save me????
I finally managed to flash my ROM using SP Flash tools but now my screen shows something like green pixels and it doesn't respond to anything!!!! It's like my display is completely "broken".... Please help!
Related
Hi XDA members, I came here because I'm tired and I cant'd do anything more, I need help
Ok so first I had a Samsung Galaxy Core Duos GTI8262, original, no modified, android 4.1.2, everything all right.
Then I starded to try to install a costum ROM with 4.4. I rooted it, and then I found a CMW Recovery and I had installed it via Odin307, but it didn't work because it was not compatible with my phone, it was crashing all the time and the phone used to make noises, like an engine working or something, and then it shuts down. Then after much search I found here in XDA a costum Recovery Based in CMW for my phone, "CMW based Recovery v6.0.4.7".
I installed it via Odin307 under the previous CMW that dint work properly, and finally everething went all right, I installed a ROM with KitCat, then another with Lillicop, etc... then I wanted to try Cynogen, it was in my model devolopment and I installed it, bigger mistake, it didn't recognize SIM card such as Wifi, Bluethoth, etc... no conections. I get tired because with all my Download mode started to get stuck, so, I could not install another ROM, so, angry, I went to based CMW Recovery and I formatted EVERYTHING, until get to the point where there wasn't ANY file in SDCARD0, I tried to make factory Reset, didn't work, so I turn the phone On and the logo "Galaxy Core Duos GTI8262" stays there forever... the phone doesn't start.
THEEN... i downloaded the stock ROM here in XDA to my model (I'm Portuguese (Portugal)), and tried to install it via Odin207. I was waiting that the Download Mode got stucked again but I tried it in the same way, because I didn't knew what to do more. BUT, instead of get stuck, the Download Mode only stays for aprox. 5 seconds, then the phone shuts down... SO > nothing in SDCARD0 (and the CWM Based doesn't have the option to install anything in extSDCard I dont know why...) and Download Mode crashes... without pay nothing, WHAT CAN I DO PEOPLE?
Please help, sorry my English...
Duarte T.
I have an Android phone karbonn a1+ HW ver-3.0.0, SW Ver-2.0.2.
I am a noob but like to experiment.
My phone was rooted and was working on stock firmware as there is not good firmware available for it (After trying several firmware i found only 1 custom was working that too was not good so i reverted back to stock and did some tweaking). It has CWM recovery installed.
Some stupid thing i did before it got bricked.
1- I tried to change font but phone became dead and i used some files to change them but that did not work so i restored my backup.
2- After restoring my backup some crazy ideas struck me, i again wanted to try those custom firmware. As normal restore of (those FW files are backup file) those were not working i tried advanced restored and restored files one by one (img, boot, system etc). After that my phone is dead.
I can enter into Recovery mode, can flash files, can restore backup which are not giving me any error but the phone is not starting. Even my backup files are not working. When i am connecting my phone to PC it is going into a bootloop. (first karbonn logo --then a white screen with vertical lines--then restart again). I am trying for last 15 days days to make it running again but it is not.
KINDLY HELP:crying::crying::crying::crying:
Hi, thank you for using XDA Assist. i'm sorry but there is very little information about your device on XDA. I'm going to ask a moderator to move your post to here, http://forum.xda-developers.com/android/help Hopefuly someone with your device will see it and be able to help.
Good luck!
[Q] Lenovo S90C - Bricked - Need Help
Hello !
I have Lenovo S90C (fake obviously) MTK6582 Octa Core 4G RAM (or so it was said on AliExpress. I just recently discovered that's not true) DoubleSIM and almost none of ROM (I could only install about 5 apps. I couldn't even make backup with MtkDroidTools etc. and modify the EBR Files, because there's not enough space for backup, it didn't work even if I tried with SD card).
Then I found a ROM on the internet where it was written in the comments that it suits my smart phone. So I tried to flash it on with SP FlashTool. And now my phone is bricked. At first it showed some coloured stripes and vibrated at the startup, but it never booted. I couldn't even get it to the recovery mode.
To this point, computer recognized the phone when it was connected. So I tried to flash a ROM again. From this attempt on, it doesn't work at all. It's totally bricked. I can not turn it on, go to the recovery mode, enter boot menu, nothing. Even computer doesn't recognize it.
Link to ROM I tried: needrom.com/download/alps-k500/
Link to phone I bought: aliexpress.com/snapshot/6662334714.html?orderId=67204220302389
So my question is; could you guys help me with getting the right ROM, with sufficient amount of internal storage.. I would also be grateful if you would help me with un-bricking the phone. I can't even get to the kernel boot menu, computer won't recognize it even with all the drivers installed and that concerns me a lot.
I would need it ASAP. Thank you all! :good:
I think you need a YunOS rom
Hey people i'm a new member in need of some help flashing my Cubot x9. Everything was fine until 2 days ago when all of a sudden i got a black screen and couldn't for the life of me get it to boot up again, so the next day i plugged it into my laptop and got the sound to say that it was detected but still no activity on the phone/screen i used SPflash tools to download the scatter file and finally got it to start without losing any data but i get errors from numerous apps and if i try to open file manager or settings it instantly closes so any advice or help would be appreciated :good: I've also tried installing the stock v18 rom from recovery mode but it says failed then i have to repeat the scatter file process to boot again
Hi,
I couldn't figure out where to ask this query since I couldn't find anything regarding my phone. I own a Lava_R1s with StarOS V3.3 with Android Version 6.0. This is a phone available specifically in the U.A.E market since its made without camera and GPS so that it can be used in the oil field.
I tried to root the phone and now its soft bricked. I can enter fastboot mode and recovery mode (TWRP) but every time i try to switch on the phone it keeps going into a loop of the "Lava Powered by android" and switches off and then continues to keep doing that.
Here is what i did.
1. I used fastboot to unlock the OEM.
2. Then I flashed TWRP as recovery for the mobile.
3. After that i installed SuperSU zip file.
After all these steps my phone refuses to start up. It just comes to the LAVA powered by android screen and stays on that screen till i press the power button.
Further more I tried flashing the boot and system with Stock ROM files downloaded from needrom.com. That hasn't helped. In fact the looping of the initial screen started after flashing boot and system files (I used img files for Lava R1 Lite since those where the only ones i could find).
Would be really grateful if anyone could provide me a solution for this issue.
Another thing is that a lot of my colleagues have the same phone, so if there is anyway to extract the rom from their phone and install on mine without actually rooting their device it would also work for me i guess.
Renojjv
Renojjv said:
Hi,
I couldn't figure out where to ask this query since I couldn't find anything regarding my phone. I own a Lava_R1s with StarOS V3.3 with Android Version 6.0. This is a phone available specifically in the U.A.E market since its made without camera and GPS so that it can be used in the oil field.
I tried to root the phone and now its soft bricked. I can enter fastboot mode and recovery mode (TWRP) but every time i try to switch on the phone it keeps going into a loop of the "Lava Powered by android" and switches off and then continues to keep doing that.
Here is what i did.
1. I used fastboot to unlock the OEM.
2. Then I flashed TWRP as recovery for the mobile.
3. After that i installed SuperSU zip file.
After all these steps my phone refuses to start up. It just comes to the LAVA powered by android screen and stays on that screen till i press the power button.
Further more I tried flashing the boot and system with Stock ROM files downloaded from needrom.com. That hasn't helped. In fact the looping of the initial screen started after flashing boot and system files (I used img files for Lava R1 Lite since those where the only ones i could find).
Would be really grateful if anyone could provide me a solution for this issue.
Another thing is that a lot of my colleagues have the same phone, so if there is anyway to extract the rom from their phone and install on mine without actually rooting their device it would also work for me i guess.
Renojjv
Click to expand...
Click to collapse
SO i flashed my phone using SP_Flash_Tool with Stock ROM for Lava R1 and its working now. but i still cant root the phone. If anyone can figure out that, please let me know.
Renojjv said:
SO i flashed my phone using SP_Flash_Tool with Stock ROM for Lava R1 and its working now. but i still cant root the phone. If anyone can figure out that, please let me know.
Click to expand...
Click to collapse
I had the same problem , and I fixed it.
When you install the TWRP for some reason the data partition get corrupted to resolve this you need to do the following :
---- before you do any thing capture the following information and keep it ----
IMEI , Barcode, Modem Version, Bluetooth MAC , WIFI MAC address
IMEI, barcode and Modem Version details can be found in the factory mode:
- switch your phone off
- Press power button and volume down -- you will boot into factory mode
- from the menu select version ( scroll using volume down button ) click power button
you should see BB chip details, MS Board, etc
note down the following into a paper or to your computer and keep it ( in my case it was useful when I changed the rom)
1- IMEI numbers
2- Modem Version ( Baseband version)
3- barcode number ( I found this info only in this menu)
for the (Bluetooth and WIFI) MAC address you need to boot into your phone and go to settings , scroll down to About phone ( in my case I need to click to More) , then click on Status
you will found ( also you can found the IMEI information it should match what you capture above)
1- Bluetooth MAC address
2- WIFI MAC address
now you have everything you need to format your mobile in case that was needed.
---- Note the following steps will wipe your contacts and reset the phone settings, data on your SD card should not be effected -------------
To root your mobile do the following:
1- install TWRP using SP_Flash
2- copy SuperSU to your SD card
3- reboot to recovery (into TWRP)
if you install SuperSU, now you should notice that it didn't complete and there are some errors for that you need to fix the data partition before install SuperSU
4- click wipe, click Advanced Wipe
5 - select Data and Click on "Repair or Change File System"
if its corrupted the size should be 0 to fix it continue step 6
6- Click change File system and change it to EXT4
7- Wipe to Change it should format the partition for you
when complete check the size of the partition is not 0
if its still 0 " Click Repair File System" in menu of step 5
now you are ready to install SuperSU
Lava iris r1s
I like to install leneage or unicorn os on lava iris r 1s. Can anybody help me ... I cant find any files for rooting and installing twrp.. please help
Rooting or TWRP for LAVA R1s
Please help me to root Lava R1s model .. tried with kingoroot and other once click root apps all failed .. kindly give working link for TWRP recovery for LAVA R1s , not able to find in the internet.
Lava r1 s, add stock rom
Hi bro I also have lava r1 s without camera,
I want to reinstall stock rom as I am tried of add on this phone,
Can you plz provide a link for stock rom and resolution to these adds
Vijay
Renojjv said:
Hi,
I couldn't figure out where to ask this query since I couldn't find anything regarding my phone. I own a Lava_R1s with StarOS V3.3 with Android Version 6.0. This is a phone available specifically in the U.A.E market since its made without camera and GPS so that it can be used in the oil field.
I tried to root the phone and now its soft bricked. I can enter fastboot mode and recovery mode (TWRP) but every time i try to switch on the phone it keeps going into a loop of the "Lava Powered by android" and switches off and then continues to keep doing that.
Here is what i did.
1. I used fastboot to unlock the OEM.
2. Then I flashed TWRP as recovery for the mobile.
3. After that i installed SuperSU zip file.
After all these steps my phone refuses to start up. It just comes to the LAVA powered by android screen and stays on that screen till i press the power button.
Further more I tried flashing the boot and system with Stock ROM files downloaded from needrom.com. That hasn't helped. In fact the looping of the initial screen started after flashing boot and system files (I used img files for Lava R1 Lite since those where the only ones i could find).
Would be really grateful if anyone could provide me a solution for this issue.
Another thing is that a lot of my colleagues have the same phone, so if there is anyway to extract the rom from their phone and install on mine without actually rooting their device it would also work for me i guess.
Renojjv
Click to expand...
Click to collapse
Custom rom required for lava r1s non camera
vsingh1611 said:
Hi bro I also have lava r1 s without camera,
I want to reinstall stock rom as I am tried of add on this phone,
Can you plz provide a link for stock rom and resolution to these adds
Vijay
Click to expand...
Click to collapse
HELLO TEAM,
PLEASE SEND ME THE CUSTOM ROM FOR LAVA R1s+ NON CAMERA ANDROID PHONE. AND ALSO PLEASE TELL ME THE STEPS HOW TO FLASH THE CUSTOM ROM. FROM THE ABOVE I JUST SEE THE STEPS TO INSTALL THE ROM,BUT NO ONE HAS SEND THE PROPER CUSTOM ROM LINK FOR LAVA R1s NON CAMERA PHONE. KINDLY REPLY FOR THE SAME.
software update error lava r1s
Renojjv said:
SO i flashed my phone using SP_Flash_Tool with Stock ROM for Lava R1 and its working now. but i still cant root the phone. If anyone can figure out that, please let me know.
Click to expand...
Click to collapse
Please tell me how to troubleshoot my software update error in my LAVA R1s non camera Android phone. The software update notification keeps on popping up. And when I click on the notification update then I get the following error saying " Not enough memory. Update needs atleast (109.82mb)". I even have hard resetted the phone but I still get the same update error later on once it gets completely resetted. As soon as it gets connected to internet data connectivity I get the pop ups for software update. How do I get rid of the same.
root lava r1
Hello...
U can try magisk manager method.
It is worked in my lava r1 2gb ram device.
Take patched boot file from magisk manager and flash it via sp flash tool.
coolmanrakesh said:
I like to install leneage or unicorn os on lava iris r 1s. Can anybody help me ... I cant find any files for rooting and installing twrp.. please help
Click to expand...
Click to collapse
I have build ressurection remix nougat. You can try it.
https://forum.xda-developers.com/android/development/lava-r1s-camera-gps-ressurection-remix-t4145507