Hi,
I couldn't figure out where to ask this query since I couldn't find anything regarding my phone. I own a Lava_R1s with StarOS V3.3 with Android Version 6.0. This is a phone available specifically in the U.A.E market since its made without camera and GPS so that it can be used in the oil field.
I tried to root the phone and now its soft bricked. I can enter fastboot mode and recovery mode (TWRP) but every time i try to switch on the phone it keeps going into a loop of the "Lava Powered by android" and switches off and then continues to keep doing that.
Here is what i did.
1. I used fastboot to unlock the OEM.
2. Then I flashed TWRP as recovery for the mobile.
3. After that i installed SuperSU zip file.
After all these steps my phone refuses to start up. It just comes to the LAVA powered by android screen and stays on that screen till i press the power button.
Further more I tried flashing the boot and system with Stock ROM files downloaded from needrom.com. That hasn't helped. In fact the looping of the initial screen started after flashing boot and system files (I used img files for Lava R1 Lite since those where the only ones i could find).
Would be really grateful if anyone could provide me a solution for this issue.
Another thing is that a lot of my colleagues have the same phone, so if there is anyway to extract the rom from their phone and install on mine without actually rooting their device it would also work for me i guess.
Renojjv
Renojjv said:
Hi,
I couldn't figure out where to ask this query since I couldn't find anything regarding my phone. I own a Lava_R1s with StarOS V3.3 with Android Version 6.0. This is a phone available specifically in the U.A.E market since its made without camera and GPS so that it can be used in the oil field.
I tried to root the phone and now its soft bricked. I can enter fastboot mode and recovery mode (TWRP) but every time i try to switch on the phone it keeps going into a loop of the "Lava Powered by android" and switches off and then continues to keep doing that.
Here is what i did.
1. I used fastboot to unlock the OEM.
2. Then I flashed TWRP as recovery for the mobile.
3. After that i installed SuperSU zip file.
After all these steps my phone refuses to start up. It just comes to the LAVA powered by android screen and stays on that screen till i press the power button.
Further more I tried flashing the boot and system with Stock ROM files downloaded from needrom.com. That hasn't helped. In fact the looping of the initial screen started after flashing boot and system files (I used img files for Lava R1 Lite since those where the only ones i could find).
Would be really grateful if anyone could provide me a solution for this issue.
Another thing is that a lot of my colleagues have the same phone, so if there is anyway to extract the rom from their phone and install on mine without actually rooting their device it would also work for me i guess.
Renojjv
Click to expand...
Click to collapse
SO i flashed my phone using SP_Flash_Tool with Stock ROM for Lava R1 and its working now. but i still cant root the phone. If anyone can figure out that, please let me know.
Renojjv said:
SO i flashed my phone using SP_Flash_Tool with Stock ROM for Lava R1 and its working now. but i still cant root the phone. If anyone can figure out that, please let me know.
Click to expand...
Click to collapse
I had the same problem , and I fixed it.
When you install the TWRP for some reason the data partition get corrupted to resolve this you need to do the following :
---- before you do any thing capture the following information and keep it ----
IMEI , Barcode, Modem Version, Bluetooth MAC , WIFI MAC address
IMEI, barcode and Modem Version details can be found in the factory mode:
- switch your phone off
- Press power button and volume down -- you will boot into factory mode
- from the menu select version ( scroll using volume down button ) click power button
you should see BB chip details, MS Board, etc
note down the following into a paper or to your computer and keep it ( in my case it was useful when I changed the rom)
1- IMEI numbers
2- Modem Version ( Baseband version)
3- barcode number ( I found this info only in this menu)
for the (Bluetooth and WIFI) MAC address you need to boot into your phone and go to settings , scroll down to About phone ( in my case I need to click to More) , then click on Status
you will found ( also you can found the IMEI information it should match what you capture above)
1- Bluetooth MAC address
2- WIFI MAC address
now you have everything you need to format your mobile in case that was needed.
---- Note the following steps will wipe your contacts and reset the phone settings, data on your SD card should not be effected -------------
To root your mobile do the following:
1- install TWRP using SP_Flash
2- copy SuperSU to your SD card
3- reboot to recovery (into TWRP)
if you install SuperSU, now you should notice that it didn't complete and there are some errors for that you need to fix the data partition before install SuperSU
4- click wipe, click Advanced Wipe
5 - select Data and Click on "Repair or Change File System"
if its corrupted the size should be 0 to fix it continue step 6
6- Click change File system and change it to EXT4
7- Wipe to Change it should format the partition for you
when complete check the size of the partition is not 0
if its still 0 " Click Repair File System" in menu of step 5
now you are ready to install SuperSU
Lava iris r1s
I like to install leneage or unicorn os on lava iris r 1s. Can anybody help me ... I cant find any files for rooting and installing twrp.. please help
Rooting or TWRP for LAVA R1s
Please help me to root Lava R1s model .. tried with kingoroot and other once click root apps all failed .. kindly give working link for TWRP recovery for LAVA R1s , not able to find in the internet.
Lava r1 s, add stock rom
Hi bro I also have lava r1 s without camera,
I want to reinstall stock rom as I am tried of add on this phone,
Can you plz provide a link for stock rom and resolution to these adds
Vijay
Renojjv said:
Hi,
I couldn't figure out where to ask this query since I couldn't find anything regarding my phone. I own a Lava_R1s with StarOS V3.3 with Android Version 6.0. This is a phone available specifically in the U.A.E market since its made without camera and GPS so that it can be used in the oil field.
I tried to root the phone and now its soft bricked. I can enter fastboot mode and recovery mode (TWRP) but every time i try to switch on the phone it keeps going into a loop of the "Lava Powered by android" and switches off and then continues to keep doing that.
Here is what i did.
1. I used fastboot to unlock the OEM.
2. Then I flashed TWRP as recovery for the mobile.
3. After that i installed SuperSU zip file.
After all these steps my phone refuses to start up. It just comes to the LAVA powered by android screen and stays on that screen till i press the power button.
Further more I tried flashing the boot and system with Stock ROM files downloaded from needrom.com. That hasn't helped. In fact the looping of the initial screen started after flashing boot and system files (I used img files for Lava R1 Lite since those where the only ones i could find).
Would be really grateful if anyone could provide me a solution for this issue.
Another thing is that a lot of my colleagues have the same phone, so if there is anyway to extract the rom from their phone and install on mine without actually rooting their device it would also work for me i guess.
Renojjv
Click to expand...
Click to collapse
Custom rom required for lava r1s non camera
vsingh1611 said:
Hi bro I also have lava r1 s without camera,
I want to reinstall stock rom as I am tried of add on this phone,
Can you plz provide a link for stock rom and resolution to these adds
Vijay
Click to expand...
Click to collapse
HELLO TEAM,
PLEASE SEND ME THE CUSTOM ROM FOR LAVA R1s+ NON CAMERA ANDROID PHONE. AND ALSO PLEASE TELL ME THE STEPS HOW TO FLASH THE CUSTOM ROM. FROM THE ABOVE I JUST SEE THE STEPS TO INSTALL THE ROM,BUT NO ONE HAS SEND THE PROPER CUSTOM ROM LINK FOR LAVA R1s NON CAMERA PHONE. KINDLY REPLY FOR THE SAME.
software update error lava r1s
Renojjv said:
SO i flashed my phone using SP_Flash_Tool with Stock ROM for Lava R1 and its working now. but i still cant root the phone. If anyone can figure out that, please let me know.
Click to expand...
Click to collapse
Please tell me how to troubleshoot my software update error in my LAVA R1s non camera Android phone. The software update notification keeps on popping up. And when I click on the notification update then I get the following error saying " Not enough memory. Update needs atleast (109.82mb)". I even have hard resetted the phone but I still get the same update error later on once it gets completely resetted. As soon as it gets connected to internet data connectivity I get the pop ups for software update. How do I get rid of the same.
root lava r1
Hello...
U can try magisk manager method.
It is worked in my lava r1 2gb ram device.
Take patched boot file from magisk manager and flash it via sp flash tool.
coolmanrakesh said:
I like to install leneage or unicorn os on lava iris r 1s. Can anybody help me ... I cant find any files for rooting and installing twrp.. please help
Click to expand...
Click to collapse
I have build ressurection remix nougat. You can try it.
https://forum.xda-developers.com/android/development/lava-r1s-camera-gps-ressurection-remix-t4145507
Related
Hello,
I got a Huawei G700, I rooted it and installed ua frost custom rom. It was working fine during 2 months until the power button was not working (need to remove battery to switch it off ...), the volume reduced by itself, ... and the device can not start anymore !
When I want to start it, there is an message :
old : risk
new : risk
recovery_status : updated
So I can not access to any application to recover it (for example mobile uncle tools)
What could I do to restart it ?
Thanks a lot for your support
install recovery from pc?
nicoach37 said:
Hello,
I got a Huawei G700, I rooted it and installed ua frost custom rom. It was working fine during 2 months until the power button was not working (need to remove battery to switch it off ...), the volume reduced by itself, ... and the device can not start anymore !
When I want to start it, there is an message :
old : risk
new : risk
recovery_status : updated
So I can not access to any application to recover it (for example mobile uncle tools)
What could I do to restart it ?
Thanks a lot for your support
Click to expand...
Click to collapse
After looking for a solution, it seems that i have to reinstall a rom.
But, how to flash the recovery without access to the phone?
I can only access to recovery mode. ?...
Thanks again if someone could help me
nicoach37 said:
After looking for a solution, it seems that i have to reinstall a rom.
But, how to flash the recovery without access to the phone?
I can only access to recovery mode. ?...
Thanks again if someone could help me
Click to expand...
Click to collapse
If you have access to the recovery mode that mean you are lucky, BCZ when i bricked mine i had no access to either recovery or to the system backups. So what i did, was simply to restore the recovery file to my phone through SPflashtool,
as far as your problem is concerned you have flashed a custom ROM into your mobile, Now you have to go back to the factory shipped Android of your phone. to do so you'll have to download the factory OS and SPflashtool, IF your phone is G700-u10 than you can download the both files from this link, take his support and unbrick your phone
http://androidxda.com/fix-huawei-ascend-g700-bootloop#comment-1825
Same problem in G610-u20
When i try to flash my g610 that gives: setting stoped error,phone does not go into recovery mode and just a display shows :
Old:risk
new:risk
recovery_status:UPDATED
PLZ PLZ PLZ,i beg you help me to fix and solve this problem,very thanks to you
Hi guys, new to the forum, but been reading for a while now.
I need some help with my gf's device which i got messed.. So here is the problem:
Device: Alcatel One Touch S'Pop (4030x)
Carrier: Globul(Bulgarian)
Root: YES
SU Status: Installed SuperSU
Stock firmware: latest ver of Android JB 4030x modded for globul
Recovery: Selfmade CWM.
So the problem is that the device was stock and sim locked by carrier globul, what i was trying to do is root inastall cust recovery and install new rom, hoping that this will debloat the device and eventualy sim unlock it, now i am stuck with a white screen every time i try to boot it, juat after the first boot animation. Tried to go to recovery - work flawlessly. Tried re-installing the custom ROM several times with no luck.. Here is what i done:
Rooted with VRoot, then installed CWM recovery via MTK Droid Root & Tools, all worked fine, the stock (rooted) ROM booted with no problems at all (restarted couple o times)
Then i downloaded to my SD the last version of GE-Rom from MXDevelopers blog and tried to flash it via recovery, following their guide(only difference that i used CWM instead of TWRP) everything went well and nice, then i pressed "Reboot device now" option in the recovery and it rebooted, shown the 1st bootlogo and than that white screen (ofdeath) and it doesn't do anything except when i press volume down and hold it, it vibrates as when you switch silent mode on with the vol keys, also i noticed that the power button works as supposed (locks unlocks).
What i need to do is getting a custom rom working on the device, or at least a stock (non globul) rom working on it..
I tried to flash thru recovery the X9 ROM in hope it will do the job but null... I tried several times to install and re install the rom with no succes so far. What i am thinking is that i somehow damaged the boot image ( i havent touched it but i dont know if the custom rom had tried to modify it. )
Please help!!
Will click the thanks button, i promise
If anything in the given information is unclear, just ask and i will clear it for you, or in case i haven't given enough info on something..
C'mon guys.. Why nobody posting ? I followed the help request guide, i made clear what the problem is and i've given all the information that is avail. ...
I mean.. Please help, any help, advice or whatever will be highly apreciated.. You see, i'm new here but if there is something i can help with - then i will do it.. I know that some devs here do have got that model of alcatel..
I had a very similar problem to yours and
Only resolved it today. Go into XDA and search
Bricked Alcatel 4030. Wergi1 has the solution
Well it worked for me good luck.
Hello people.
I have KINGZONE SM-N9002 (Clone of Samsung Galaxy Note 3) MTK6582 and today I tried to install this ROM (Android 4.4 KitKat) -> needrom.com/download/am3-kk-v1-0-for-kingzone-sm-n9002 . I did everything, wiped data/cache/ everything I needed to and installed it . Then clicked on Reboot, and what happened is that my phone doesn't reach the menu, it just reboots showing the logo screen every time constantly!!!! I clicked on restore on Recovery mode, but it seems there are no files there. I tried to to reflash my ROM using this -> needrom.com/download/kingzone-sm-n9002-mt6582 but when I do it using Flash Tools, I get the error Invalid scatter file format. Please help! I'm in terrible need of my phone and since it is a clone, I will have to send it back to China and wait ages for it get back. Plus, I'm leaving for Scotland in two weeks time so I'm in desperate need of my phone. I cannot do anything!!! I have Flash Tools and MTK Droid Tools on my PC, so can you suggest anything that can save me????
I finally managed to flash my ROM using SP Flash tools but now my screen shows something like green pixels and it doesn't respond to anything!!!! It's like my display is completely "broken".... Please help!
not too long ago i bought lenovo vibe p1 from
http://www.tinydeal.com/lenovo-vibe...5-octa-core-android-51-4g-phone-p-159991.html
so i failed didint made backup,tryed to flash unsucessfully and didnt made system backup.
what goes now
i seems to made unlock boot,instal twrp 3.0 and its not dificult,got all drivers and etc. but what goes next .as telephone got no os,i downloaded several of p1a42 versions and tryed to instal thruoght twrp recovery
http://forum.xda-developers.com/vibe-p1/development/qpst-flashing-vibeui-3-1-s272-rom-t3386650
none of those roms suited me,because as instalion begins mine smartphone tells :
failed to instal p1a42 rom because this model is idol 347.
i even delete some files in
http://forum.xda-developers.com/showthread.php?t=2522762
finally everything seemd to go well enought,thought mobile phone doesnt boot ,only restart.as well can go in twrp.
tryed loads of ways-to instal original recovery and put image througt instal update. udate.zip but it gets immediatly failed and nothing happens.tryed t instal throuht qst.but as much as telephone needs to restart.it goes to boot loop and nothing happens...tell me what exact information i need to give to go futher,thank you
as well i would try files with qsb format (sdfuse) but mine bootloader is gone. and i nowhere even find how to make it back. i mean i have recovery mode,but dont have bootloader.and as qsb should be launched fom some of bootloader options,i cant
you can edit it? I'm having the same issue
I'm also having the same problem!! Can anyone help?
I recently got this device and I did the same mistake. Just update twrp to latest one and you will be able to flash ROMs.
Thank you for reading this thread.
Dear XDA members,
I tried rooting my device "ASUS_X01AD" 3days ago. But somehow i failed and brick my phone.
Googled a way to unbrick and manage to boot it back but it was not my original ROM.
So i tried download other Custom ROM and Stock ROM,
Pixel Exp (Flashed and stuck in bootloop (not fastboot loop)
Havoc (Failed to flash)
Cherish OS (Flashed and stuck in bootloop (not fastboot loop)
After that i use this (https://www.asus.com/my/mobile/phones/zenfone/zenfone-max-m2/helpdesk_bios/)
But after that i notice i have some problem with it, IMEI unknown and without android 10 update the device wont get wifi turn on.
Im not sure if i did any wrong in following guides, But please help me with my favourite device.
Almost all guides i already follow in XDA threads but maybe i miss some steps,
Also try to enable diag *#3424#* but my pc wont detect unless i boot it up with Volume + & - qualqom usb will detect but still i cant use qfil qcn restorer option
The reason why i want to root it because i want to recover my internal storage data with data recovery.
Been using this device 5 years ago .
Thank you again for reading my thread.