I installed a custom splash screen n now when I get into ny recovery I get this message. Idk what could of been don't wrong or what happened. Followed the steps on how to flash a splashscreen not hard at all. But when I click on one of the options let's say "wipe cache" another thing pops up. Any help???? ...hboot 1.4 S-OFF ...CWM
Sent from my PG86100 using xda premium
chuko303 said:
I installed a custom splash screen n now when I get into ny recovery I get this message. Idk what could of been don't wrong or what happened. Followed the steps on how to flash a splashscreen not hard at all. But when I click on one of the options let's say "wipe cache" another thing pops up. Any help???? ...hboot 1.4 S-OFF ...CWM
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
your recovery is trying to load things that are not there...you should have a prior and recent backup of your system...if so.. hook the phone up to your computer and copy the back up to your computer and open up that zip file....in it youll see a file named cache.img extract that image and then copy it over to where your fastboot file is.... unplug the phone...reboot into your hboot,select fast boot then plug it back in... you should see it say fastboot usb,,, now on your computer type this in
fastboot flash cache cache.img
it should send then write since youre s-off and then reboot into your recovery and see if you get the message still,try also reflashing the recovery... post back and let me know please...im curious myself.
Dos you facrory reset ? Uf you did, then that's your problem .
Sent from my PG86100 using XDA
It happens to me before I had to flash a new recovery.img with fastboot
Sent from my 3XD using Tapatalk 2
wloftus said:
your recovery is trying to load things that are not there...you should have a prior and recent backup of your system...if so.. hook the phone up to your computer and copy the back up to your computer and open up that zip file....in it youll see a file named cache.img extract that image and then copy it over to where your fastboot file is.... unplug the phone...reboot into your hboot,select fast boot then plug it back in... you should see it say fastboot usb,,, now on your computer type this in
fastboot flash cache cache.img
it should send then write since youre s-off and then reboot into your recovery and see if you get the message still,try also reflashing the recovery... post back and let me know please...im curious myself.
Click to expand...
Click to collapse
What's fastboot?? I'm on hboot 1.4 s-OFF
Sent from my PG86100 using xda premium
chuko303 said:
What's fastboot?? I'm on hboot 1.4 s-OFF
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
ok when you hold the volume down button and press power that puts you at your HBOOT screen... on your HBOOT screen there is a choice that says fastboot...select that and then plug your data cable into your phone and you should see it say fastboot usb....thats fastboot mode...it allows you to write to the partitions...
wloftus said:
ok when you hold the volume down button and press power that puts you at your HBOOT screen... on your HBOOT screen there is a choice that says fastboot...select that and then plug your data cable into your phone and you should see it say fastboot usb....thats fastboot mode...it allows you to write to the partitions...
Click to expand...
Click to collapse
Can you PLEASE pM me the steps bro? Please I really want to get back into the game and try new roms
Sent from my PG86100 using xda premium
chuko303 said:
Can you PLEASE pM me the steps bro? Please I really want to get back into the game and try new roms
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
sent....
download the attached file and go to your c drive... create a folder named fastboot then open up the file.zip file...youll see a new window and thenmore files...copy and paste those to the folder you just created
wloftus said:
download the attached file and go to your c drive... create a folder named fastboot then open up the file.zip file...youll see a new window and thenmore files...copy and paste those to the folder you just created
Click to expand...
Click to collapse
Sigh.....what's "c drive"? And where ???...also can't I just plug in my phone...use it as a usb drive. To Take out those files u say??? ..**** I hate this
Sent from my PG86100 using xda premium
chuko303 said:
Sigh.....what's "c drive"? And where ???...also can't I just plug in my phone...use it as a usb drive. To Take out those files u say??? ..**** I hate this
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
c drive is the main drive when you open my computer in windows
wloftus said:
c drive is the main drive when you open my computer in windows
Click to expand...
Click to collapse
here
http://goo-inside.me/stock/shooter/ruu
Everyone is giving such a difficult answer. All you have to do is wipe cache in recovery.
Sent from my PG86100 using xda premium
VictoriousShooter said:
Everyone is giving such a difficult answer. All you have to do is wipe cache in recovery.
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
youre right...the prob was fixed...thing was is that the recovery he was using wasnt allowing him to scroll through the options even after re-flashing the IMG. the phone owner wasnt the one who did the original flashing and wasnt sure on how to use fastboot to fix this issue... the recovery i posted in the most recent post allows you to scroll through the options and clear the cache and then reboot into recovery again and the problem should vanish...
I'm kinda thankful for hboot 1.5, it forced me to learn about using adb/SDK tools, I've downgraded since but I'm thankful I had to go through the bullsh**, ive learned a lot
Sent from my PG86100 using xda premium
Related
Ok guys, before I go into my question let me tell you what I did. (a bit of a long story, if you don't want to read it, just head to the bottom to read my question )
I did a complete format of my phone inside twrp, wiped everything, to install a new rom. I got an error which after a bit of searching I found out that I had to install the latest twrp. So, withing the twrp menu, I selected "mount usb" and copied the latest pc86img file to the card. I dismounted and, again, inside the twrp menu selected "power off". I turned on the phone by holding down the volume button. It updated the recovery and all was good..... up to right now.
Now, I could not boot my phone into a rom because I had already formatted all of my phone, so I could not erase the pc86img file. Also, I could not boot into recovery because hboot kept finding the pc86img file and it would not give me any other options than to apply or reboot.
I ended removing the case, removing the back cover, removing the battery, removing the sdcard, plugging in my sdcard into my computer, deleting the file, putting back the sdcard, put the battery, put the back cover, and finally put the case back on.
I think this was too much work for something so simple. I remember in my Evo 4G, if there was a pc86img file sitting in the sdcard, the bootloader would detect it and if I did not want to apply it, it would just take me back to the bootloader's menu.
So, now to my question: is there anybody out there in this wonderful community of hackers talented enough to put out a new/modified hboot that will thow me back to the bootloader menu if I don't want to apply the pc86img file? Thanks.
arqbrulo said:
What he's trying to say is, make it so when you don't want to update the PCIMG, it doesn't auto reboot. Sucks to have to take the file out and then re-reboot again.
Click to expand...
Click to collapse
seewhatididthere?
I approve of this request. +10 on correctness, grammar... And clearness. WIN!
I don't see this situation coming up often enough for anybody for it to be worth fixing...
...besides, unless you are never near a computer when you are a romman and moddan why no just flash via fastboot instead?
arqbrulo said:
So, now to my question: is there anybody out there in this wonderful community of hackers talented enough to put out a new/modified hboot that will thow me back to the bootloader menu if I don't want to apply the pc86img file? Thanks.
Click to expand...
Click to collapse
All you had to do was turn the phone on and at the splash screen was type "adb recovery" from cmd.
Sent from my PG86100 using XDA Premium App
Would the engineering boot loader that is available in development have this same problem.
cruise350 said:
Would the engineering boot loader that is available in development have this same problem.
Click to expand...
Click to collapse
Yes, I tried the eng hboot, and it's the same. Therefore, I'm sure it's an HTC thing.
And no, I am not always in front of my computer when I'm romming/nodding.
Sent from my PG86100 using XDA App
steal25 said:
All you had to do was turn the phone on and at the splash screen was type "adb recovery" from cmd.
Sent from my PG86100 using XDA Premium App
Click to expand...
Click to collapse
Did not know that.
Sent from my PG86100 using XDA App
hi i ****ed up while i wass updating to cm10alpha2 now the phone dont boot normally but i can make it boot in recovery mod so i wass wondering is there a file i can put on my micro sd card i could runn in recovery mod to (format the phone to its original firmware) or if there is a way to fix this thanks
You'll need yo SBF if you can't get past recovery.
Sent from my MB870 using xda premium
GoClifGo05 said:
You'll need yo SBF if you can't get past recovery.
Sent from my MB870 using xda premium
Click to expand...
Click to collapse
what is sbf and what is the process you are proposing
Try this:
http://forum.xda-developers.com/showthread.php?t=1175300
tallyforeman said:
Try this:
http://forum.xda-developers.com/showthread.php?t=1175300
Click to expand...
Click to collapse
ok i did it but now im stuck on the activate menu ...so i cant go and change usb setting for droidx2 root 2012 to recognise the phone ... is there a way to skip the activate thing because im in canada and the call is directed to usa -_-
Turn off the phone. Hold volume down and then hold power until fastboot appears at the top of the screen. Use volume down to scroll to 'start android no bp' and press.volume up to select it.
Or starting on the top left corner of your screen press the 4 corners going clockwise.
Sent from my MB870 using xda premium
Well, I'm new to installing stuff on this device, and I need a bit of help when it comes to this. Currently, I'm unlocked and rooted. I would like to get this guy running a new kernel and eventually a whole new ROM.
I want to get more battery out of it. Honestly, its been pretty solid so far, but I just want to get more.
So what do I need to do in order to install a new kernel? I just want to make sure I'm following whatever steps correctly. Also, I'm assuming there is a stock kernel I can go back to, yes?
Dsb's custom kernel:
http://forum.xda-developers.com/showthread.php?t=2024776
You can either use the instructions in the op or use flash image GUI (http://forum.xda-developers.com/showthread.php?t=2086361)
Sent from my HTC6435LVW using xda app-developers app
Yes there is a stock kernel u can go back to
sent from my beastly powered DNA using Tapatalk 2
Once your rooted
On your computer make sure you have HTC drivers installed
Then download the boot.img of the kernel onto your computer
Plug you phone and on your phone go to Setting> Developer Options > Turn On Usb Debugging
Then open up adb and type "Adb Reboot Bootloader"
Then type "Fast Boot Flash Boot [Where you put the boot.img]
Now go into recovery and flash the modules
done
MustafaHadaKing said:
Once your rooted
On your computer make sure you have HTC drivers installed
Then download the boot.img of the kernel onto your computer
Plug you phone and on your phone go to Setting> Developer Options > Turn On Usb Debugging
Then open up adb and type "Adb Reboot Bootloader"
Then type "Fast Boot Flash Boot [Where you put the boot.img]
Now go into recovery and flash the modules
done
Click to expand...
Click to collapse
Yea Wat Mustafa said..lol :thumbup:
sent from my beastly powered DNA using Tapatalk 2
Those sound extremely easy enough. I flashed the boot.img, but I misunderstood the instructions on the Flash Image GUI and I didn't have the modules.zip extracted so I had to boot the phone to unzip the file then install it.
Do you always have to do this with the DNA or if we get S-Off, will it be as simple as a Nexus device where it's just a zip you flash?
Shamrock13 said:
Those sound extremely easy enough. I flashed the boot.img, but I misunderstood the instructions on the Flash Image GUI and I didn't have the modules.zip extracted so I had to boot the phone to unzip the file then install it.
Do you always have to do this with the DNA or if we get S-Off, will it be as simple as a Nexus device where it's just a zip you flash?
Click to expand...
Click to collapse
With s off you can just flash everything in recovery.
Sent from my HTC6435LVW using xda app-developers app
That's what I figured. Question about something else!
How is everyone controlling their volts and governors and such? I know there are some apps out there, but I can't remember their names. Also, I know you can via terminal, but k forget how to do that, too.
Shamrock13 said:
Those sound extremely easy enough. I flashed the boot.img, but I misunderstood the instructions on the Flash Image GUI and I didn't have the modules.zip extracted so I had to boot the phone to unzip the file then install it.
Do you always have to do this with the DNA or if we get S-Off, will it be as simple as a Nexus device where it's just a zip you flash?
Click to expand...
Click to collapse
I did the exact same thing and it wouldn't boot to homescreen after that, I tried to sideload the .zip and eventually did a factory reset and tried again. Thank heaven it worked though
Sent from my HTC6435LVW using xda app-developers app
Shamrock13 said:
That's what I figured. Question about something else!
How is everyone controlling their volts and governors and such? I know there are some apps out there, but I can't remember their names. Also, I know you can via terminal, but k forget how to do that, too.
Click to expand...
Click to collapse
You could use system tuner. I use the setting in the app "Pimp my rom" though. Very convenient.
Sent from my HTC6435LVW using xda app-developers app
I'm trying to go back to stock to send my phone back to verizon. I keep getting this error. Does anyone have any suggestions on how to fix this?
You need to make sure you are on the correct radio version before you run the Ruu. If you aren't then it will not work. Also make sure that there are no files on the root of your sd card named PG05IMG.
Sent from my ADR6400L using Tapatalk 2
disconnecktie said:
You need to make sure you are on the correct radio version before you run the Ruu. If you aren't then it will not work. Also make sure that there are no files on the root of your sd card named PG05IMG.
Sent from my ADR6400L using Tapatalk 2
Click to expand...
Click to collapse
I have the 2.11.605.19 radios and there is no PG05IMG on the root of the sd card. The only ones I saw on the root like that are ota block and su. Does it matter what ROM i'm on? I'm on ICS v1.5 MR3- android 4.0.4 and superSU binary v0.99.
That shouldn't matter. Since Ruu files are flashed in fast boot the rom you are running won't matter. You should post your question in his thread in the development forum and maybe even skim through it because I remember there were others having the same issue and there is a definite fix for it.
Sent from my ADR6400L using Tapatalk 2
disconnecktie said:
That shouldn't matter. Since Ruu files are flashed in fast boot the rom you are running won't matter. You should post your question in his thread in the development forum and maybe even skim through it because I remember there were others having the same issue and there is a definite fix for it.
Sent from my ADR6400L using Tapatalk 2
Click to expand...
Click to collapse
I've looked at a bunch of the all in one threads on different websites and have not come across any of the same problems. I couldn't post in that section yet last time i tried. I'll try again.
nope, still can't.
Ok then try this. Download and fastboot flash the latest Ruu first. Then run the tool.
Sent from my ADR6400L using Tapatalk 2
disconnecktie said:
Ok then try this. Download and fastboot flash the latest Ruu first. Then run the tool.
Sent from my ADR6400L using Tapatalk 2
Click to expand...
Click to collapse
ok im downloading the ruu off the all in one thread. I just put it on the root of sd card and then fastboot flash? Can you describe the process of the fastboot flash so i don't mess it up?
First check the MD5 and make sure it matches. Put the Ruu on the root of your sd card. Rename it to PG05IMG. Reboot into the bootloader. Press the volume rocker so it will scan your SD card. Select the fastboot option using the power button. Then select yes when it asks if you want to update.
Sent from my ADR6400L using Tapatalk 2
disconnecktie said:
First check the MD5 and make sure it matches. Put the Ruu on the root of your sd card. Rename it to PG05IMG. Reboot into the bootloader. Press the volume rocker so it will scan your SD card. Select the fastboot option using the power button. Then select yes when it asks if you want to update.
Sent from my ADR6400L using Tapatalk 2
Click to expand...
Click to collapse
Ok put on the latest RUU and tried to use the all in one tool to unroot. It gave me the same error.
Do you have adb setup on your pc and are you using adb devices before you try using the tool? Also, I dont know if you are already but make sure you put your phone into charge only mode and the display set to always on.
Oh and also try right clicking the allinonetool and running it as administrator.
Sent from my ADR6400L using Tapatalk 2
disconnecktie said:
Do you have adb setup on your pc and are you using adb devices before you try using the tool? Also, I dont know if you are already but make sure you put your phone into charge only mode and the display set to always on.
Oh and also try right clicking the allinonetool and running it as administrator.
Sent from my ADR6400L using Tapatalk 2
Click to expand...
Click to collapse
No I do not have adb on my pc. yes it is in charge only and display always on. I don't know where exactly to right click at to bring up that option.
adambomb7777 said:
No I do not have adb on my pc. yes it is in charge only and display always on. I don't know where exactly to right click at to bring up that option.
Click to expand...
Click to collapse
You need to install adb. I don't think that tool is going to work without it. Just Google how to install adb. There are plenty of guides and it is easy to do. Whatever bat file you click normally to run the tool needs to be right clicked. At the bottom there should be an option to open as administrator or run as administrator.
Sent from my ADR6400L using Tapatalk 2
disconnecktie said:
You need to install adb. I don't think that tool is going to work without it. Just Google how to install adb. There are plenty of guides and it is easy to do. Whatever bat file you click normally to run the tool needs to be right clicked. At the bottom there should be an option to open as administrator or run as administrator.
Sent from my ADR6400L using Tapatalk 2
Click to expand...
Click to collapse
When you install the tool does it have adb in it? I right clicked on where I run the tool from and it didn't give me an option for administrator. I just don't understand how it rooted the phone fine, but now won't unroot.
I don't know. I think you need to install adb. I can't see how you would unroot without it.
Sent from my ADR6400L using Tapatalk 2
I ended up just using the nat3mil video and followed the instructions. All back to stock and unrooted. Thank you for taking the time to help me. Hopefully when I get the new phone I don't have any more problems with the all in one tool.
I broke my screen completely. I want to replace the device with insurance.
I am rooted, S-Off, Nil's Business 3.6 v6.4 installed. USB debugging is enabled. The device shows up when using the command "adb devices".
What is the best way to ensure a good brick? I was thinking of flashing a boot.img file made from an MP3 or something in fastboot.
Thoughts?
why would you brick it?? why dont you just lock it and RUU?
The device keeps going offline in adb. I don't think I have time to do anything in adb at this point.
Screw it. I'm going to brick it the "old-fashioned" way. If I can't fine any bricks, maybe I'll check out how some truck tires work.
Hex edit a hboot, just mess up some bytes or delete some. Then flash it in bootloader.. That should brick it pretty hard.
Sent from my ADR6425LVW using xda app-developers app
If thats what you really want to do, doing qhat squirrel said would totally toast it
Quick question. I was trying to "adb pull mnt" to pull files from the phone. It only transfer a few MB's or so before going offline.
After many battery pulls, I can "adb rebooot recovery". From recovery, it won't go offline, but I can't adb pull from recovery.
Is there a way to transfer files from the phone in recovery?
Then I'm bricking it...
xdadevnube said:
Quick question. I was trying to "adb pull mnt" to pull files from the phone. It only transfer a few MB's or so before going offline.
After many battery pulls, I can "adb rebooot recovery". From recovery, it won't go offline, but I can't adb pull from recovery.
Is there a way to transfer files from the phone in recovery?
Then I'm bricking it...
Click to expand...
Click to collapse
I think you'd have to mount the storage within recovery.. Maybe blindly select mount since your screen isn't working.
What recovery are you on? If your amon I can post instructions for you to do it blindly
EDIT. so for amon it will be this :
Once in recovery
1. Press down volume 6x
2. Press power
3. Press down 4x for ext_sd
Or 5x for sdcard
4. Press power
You could also try this.. Havnt tried myself.
It's the usb mass storage setting in amon
To get that just :
1. Press down volume 1x
2. Press power
3. Press down volume 1x for ext_sd
Or 2x for internal sd
4. Press power
I'm assuming that will make it show up as an external storage on your computer
Sent from my ADR6425LVW using xda app-developers app
Squirrel1620 said:
I think you'd have to mount the storage within recovery.. Maybe blindly select mount since your screen isn't working.
What recovery are you on? If your amon I can post instructions for you to do it blindly
EDIT. so for amon it will be this :
Once in recovery
1. Press down volume 6x
2. Press power
3. Press down 4x for ext_sd
Or 5x for sdcard
4. Press power
You could also try this.. Havnt tried myself.
It's the usb mass storage setting in amon
To get that just :
1. Press down volume 1x
2. Press power
3. Press down volume 1x for ext_sd
Or 2x for internal sd
4. Press power
I'm assuming that will make it show up as an external storage on your computer
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
I was able to use the usb mass storage option in Amon Ra blindly. Thanks man!
xdadevnube said:
I was able to use the usb mass storage option in Amon Ra blindly. Thanks man!
Click to expand...
Click to collapse
Awesome glad to hear. I'm all for recovering data.. It just sucks too much to lose it
Sent from my ADR6425LVW using xda app-developers app
I appreciate the help with the data.
Unfortunately, I can't seem to brick the device with my hex-edited boot.img.
C:\PROGRA~2\Android\android-sdk\platform-tools>fastboot flash boot boot.img
sending 'boot' (5441 KB)...
OKAY [ 1.156s]
writing 'boot'...
FAILED (remote: not allowed)
finished. total time: 1.482s
I get the same thing when flashing my hex-edited hboot.nb0
Maybe my device is all messed up.
I may need some other bricking method. I am getting closer and closer to rounding up some real bricks.
Hmm sounds like you want help with insurance fraud. You realize that if the phone is damaged in any way they will deny coverage and make you pay full retail for the replacement phone? A cracked screen would make you ineligible for a warranty replacement.
Good luck with that
pwned3 said:
Hmm sounds like you want help with insurance fraud. You realize that if the phone is damaged in any way they will deny coverage and make you pay full retail for the replacement phone? A cracked screen would make you ineligible for a warranty replacement.
Good luck with that
Click to expand...
Click to collapse
It covers accidental damage. It has already been accidentally damaged. I just want erase any hope of data recovery from the device.
Use the updater script from this ph98img with your messed up hboot image.. Then once again blindly flash in bootloader
http://forum.xda-developers.com/showthread.php?t=1853871
To flash blindly should be easier, just boot into bootloader.. Wait about 5-10 seconds and hit volume up to accept the update
Sent from my ADR6425LVW using xda app-developers app
Squirrel1620 said:
Use the updater script from this ph98img with your messed up hboot image.. Then once again blindly flash in bootloader
http://forum.xda-developers.com/showthread.php?t=1853871
To flash blindly should be easier, just boot into bootloader.. Wait about 5-10 seconds and hit volume up to accept the update
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
Thanks, I will try this after work
Sent from my SCH-I605 using Tapatalk 2
Hiya devnube
Is it a definite that you're getting a replacement?
Sent from my ADR6425LVW using Xparent Green Tapatalk 2
Snuzzo said:
Hiya devnube
Is it a definite that you're getting a replacement?
Sent from my ADR6425LVW using Xparent Green Tapatalk 2
Click to expand...
Click to collapse
I dig the Rez, so I'm gonna go replacement. Did you need a device for development?
xdadevnube said:
I dig the Rez, so I'm gonna go replacement. Did you need a device for development?
Click to expand...
Click to collapse
You do know that VZW discontinued the Rezound, right?
Sent from my Nexus 10
trickster2369 said:
You do know that VZW discontinued the Rezound, right?
Sent from my Nexus 10
Click to expand...
Click to collapse
They still will have cln devices
Use an hboot from a different phone
Sent from my EVO using xda premium
xdadevnube said:
I broke my screen completely. I want to replace the device with insurance.
I am rooted, S-Off, Nil's Business 3.6 v6.4 installed. USB debugging is enabled. The device shows up when using the command "adb devices".
What is the best way to ensure a good brick? I was thinking of flashing a boot.img file made from an MP3 or something in fastboot.
Thoughts?
Click to expand...
Click to collapse
If you are going the insurance route you dont need to brick it. if you were going to RMA it then you would need to return to stock.