okay I have been trying to get winsuk's cm9 to work on my phone for some time now and I am still suffering from boot loop after I flashed the gapps. Without flashing gapps, I can boot up just fine. Here's what I have done so far:
boot into CMW, factory reset, wipe cache, wipe dalve cache, install cm9
reboot
boot into CMW, flash gapps
reboot
stuck in boot loop
I tried the latest gapp and one older one, still can't fix the boot loop. Please help
Try wiping the dalvik cache after flashing gapps. Also, you could try flashing these gapps: http://www.4shared.com/zip/-7BdBsdr/gapps-ics-small_02_06-20120429.html.
Read the post?
Update to 2.2 Froyo & S-OFF.
flash gapps tiny and it works! thank you!
you have the old radio... if you update to the new (froyo) you can install normal gapps., like 20120429
Speedriky97 said:
you have the old radio... if you update to the new (froyo) you can install normal gapps., like 20120429
Click to expand...
Click to collapse
Really want to try out this ROM, but am on a Mac, so cannot run the windows based S-Off method mentioned by WinSuk.
Having the same bootloop issue and not able to download the mentioned gapps tiny file. 4shared site has a lame registration fee. Hints?
Thanks in advance!
HTC Aria 7.2
B&N Nook Color 7.2
dtonshel said:
Really want to try out this ROM, but am on a Mac, so cannot run the windows based S-Off method mentioned by WinSuk.
Having the same bootloop issue and not able to download the mentioned gapps tiny file. 4shared site has a lame registration fee. Hints?
Thanks in advance!
HTC Aria 7.2
B&N Nook Color 7.2
Click to expand...
Click to collapse
You don't have to pay to register at 4shared.
Related
Hi there, I need your help and advice please.
Here’s my problem. My phone is the SGS2 running KI3 rooted with CF-root KI3 flashed the secure kernel and then flashed the zImage so I still have root CWM and to get rid of the yellow triangle. I have downloaded CM nightly 88 to my laptop and transferred it to my S2 via usb cable into the download folder.
Here’s where the problem comes into play when I run CF’s CWM and choose reboot into recovery I do a wipe/factory reset / wipe cache and update via sdcard, I pick the cm88 from the download folder and it starts to update and then stops. I reboot and it’s stuck on the Samsung S2 page (boot loop). I then have to get into the recovery and restore my phone to the previous state. Can someone help me I would like to try the CM’s custom rom but don’t know what I’m doing wrong? Thanks.
i have the exact same problem!
InFa_ReD_1 said:
Hi there, I need your help and advice please.
Here’s my problem. My phone is the SGS2 running KI3 rooted with CF-root KI3 flashed the secure kernel and then flashed the zImage so I still have root CWM and to get rid of the yellow triangle. I have downloaded CM nightly 88 to my laptop and transferred it to my S2 via usb cable into the download folder.
Here’s where the problem comes into play when I run CF’s CWM and choose reboot into recovery I do a wipe/factory reset / wipe cache and update via sdcard, I pick the cm88 from the download folder and it starts to update and then stops. I reboot and it’s stuck on the Samsung S2 page (boot loop). I then have to get into the recovery and restore my phone to the previous state. Can someone help me I would like to try the CM’s custom rom but don’t know what I’m doing wrong? Thanks.
Click to expand...
Click to collapse
try download it again. Sound like a corrupted package
Sent from my GT-I9100 using Tapatalk
rembrandtlnx said:
try download it again. Sound like a corrupted package
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
I tried and got the samething. I also tried a different cm nightly and got the same results.
InFa_ReD_1 said:
I tried and got the samething. I also tried a different cm nightly and got the same results.
Click to expand...
Click to collapse
me2 only stock roms work for me =(
I think there was an issue with the version of CWM used on the CF-roots since it's been modified by CF and because it's an older version.
After you've rooted with CF, try flashing a kernel on there with a newer version of CWM on there (I used codeworkx's kernel from the Cyanogenmod wiki I've attached below with CWM 4.0.1.4).
Once this kernel is on there, then try flashing the CM7 ROM as per this thread. I prefer flashing from recovery myself, but it's your call.
Make sure you flash it twice in a row if you're having issues.
The problem, as stated above is that cf root kernel installs a modified version of CWM that won't work with CM7. Another thing is you have to flash a stock KH3 because KI3 has the new bootloader (unless you flashed KI3 with the old bootloaders). Then, you have to flash the codeworkx kernel so you get a compatible version of CWM. Once in CWM clear data factory reset + clear cache partition + clear dalvik cache (from advanced).
THIS IS IMPORTANT: Flash the ROM from sd card and when finish do not reboot device, just flash it again without wiping anything in between, just 2 consecutives "install from sd card". When this is done you can reboot the system and then enter again to CWM to flash the google apps .zip file that you can download from the CM7 thread.
Hope this helped. When I flashed CM7 i had exactly the same problem and went back to stock cause it was a pain in the ass to flash it fr the first time. But once you get in CM7, everything becomes great and easy, and you can update the nighlies directly from ROM manager without doing any wiping. You just can't use ROM manager when getting to CM7 for the first time.
InFa_ReD_1 said:
Hi there, I need your help and advice please.
Here’s my problem. My phone is the SGS2 running KI3 rooted with CF-root KI3 flashed the secure kernel and then flashed the zImage so I still have root CWM and to get rid of the yellow triangle. I have downloaded CM nightly 88 to my laptop and transferred it to my S2 via usb cable into the download folder.
Here’s where the problem comes into play when I run CF’s CWM and choose reboot into recovery I do a wipe/factory reset / wipe cache and update via sdcard, I pick the cm88 from the download folder and it starts to update and then stops. I reboot and it’s stuck on the Samsung S2 page (boot loop). I then have to get into the recovery and restore my phone to the previous state. Can someone help me I would like to try the CM’s custom rom but don’t know what I’m doing wrong? Thanks.
Click to expand...
Click to collapse
DO NOT use cf-root to install CM7. It's stated by Codeworkx a lot of times in CM Q&A thread. Just flash his kernel to get cwm.
http://forum.xda-developers.com/showthread.php?t=1118693
Now you have the original cwm recovery (from Koush). Boot into recovery, Wipe data, cache, dalvik.
Install CM7 twice in a row without rebooting.
Then flash gapps (without rebooting) http://goo-inside.me/gapps/gapps-gb-20110828-signed.zip.
Now reboot. Wait for a few mins since system has to build dalvik cache. And you're all good to go
Worried about yellow triangle? Get a usb jig.
Siyah kernel 2.0 supports CM7 and miui. So....have fun.....!!
droidphile said:
DO NOT use cf-root to install CM7. It's stated by Codeworkx a lot of times in CM Q&A thread. Just flash his kernel to get cwm.
http://forum.xda-developers.com/showthread.php?t=1118693
Now you have the original cwm recovery (from Koush). Boot into recovery, Wipe data, cache, dalvik.
Install CM7 twice in a row without rebooting.
Then flash gapps (without rebooting) http://goo-inside.me/gapps/gapps-gb-20110828-signed.zip.
Now reboot. Wait for a few mins since system has to build dalvik cache. And you're all good to go
Worried about yellow triangle? Get a usb jig.
Siyah kernel 2.0 supports CM7 and miui. So....have fun.....!!
Click to expand...
Click to collapse
Thanks. Can i flash the orginal CWM over top the CF CWM?
InFa_ReD_1 said:
Thanks. Can i flash the orginal CWM over top the CF CWM?
Click to expand...
Click to collapse
I did it and didn't have any problems, just follow the steps as I posted above.
tomascunill said:
I did it and didn't have any problems, just follow the steps as I posted above.
Click to expand...
Click to collapse
Great thanks for the help it worked I'm now running CM7. One thing though I can make calls but have lost my network connection. Can someone help me with this? Sorry for all the questions I'm new to the whole smartphone business. Thanks.
Ok all fixed up thanks for all your help.
Hello All,
I am able to flash my phone to any other rom so I was looking for some help to get ICM up and running.
If I flash my phone with beta 0.4.3 or 0.4.4 cwm flashable i reboot my phone and it sits in the "unlocked" Motorola Dual Core Technology screen and won't boot. Any ideas or can I get you information off my phone to assist?
Thanks,
Olsookie
olsookie said:
Hello All,
I am able to flash my phone to any other rom so I was looking for some help to get ICM up and running.
If I flash my phone with beta 0.4.3 or 0.4.4 cwm flashable i reboot my phone and it sits in the "unlocked" Motorola Dual Core Technology screen and won't boot. Any ideas or can I get you information off my phone to assist?
Thanks,
Olsookie
Click to expand...
Click to collapse
Make sure to use Joker's Clockworkmod recovery, named cwm-v3, here.
Thanks gollyzila, I am using the Jokersax CWMv3 recovery image at this time. I meant to mention that earlier in my first post.
Thanks,
Olsookie
olsookie said:
Hello All,
I am able to flash my phone to any other rom so I was looking for some help to get ICM up and running.
If I flash my phone with beta 0.4.3 or 0.4.4 cwm flashable i reboot my phone and it sits in the "unlocked" Motorola Dual Core Technology screen and won't boot. Any ideas or can I get you information off my phone to assist?
Thanks,
Olsookie
Click to expand...
Click to collapse
I would recommend flashing 0.4.0 first, then Gapps if you want it, then boot up. Then wipe cache and flash to 0.4.4 and re-flash Gapps. This method has been posted for the previous couple versions to avoid problems and seems to resolve a lot of issues. Might give it a shot and at least see if 0.4.0 will boot. Also check to make sure your download is the correct size and not corrupted.
try pulling the battery and then booting again. if that doesn't work flash 0.4.0 first like ccallahan suggested
CCallahan said:
I would recommend flashing 0.4.0 first, then Gapps if you want it, then boot up. Then wipe cache and flash to 0.4.4 and re-flash Gapps. This method has been posted for the previous couple versions to avoid problems and seems to resolve a lot of issues. Might give it a shot and at least see if 0.4.0 will boot. Also check to make sure your download is the correct size and not corrupted.
Click to expand...
Click to collapse
wala! that worked. thank you very much CCallahan. much appreciated.
i was having the same problem heres what i did i factory reset cleared cache/dalvic installed 3.1 then reboot wipe cache/dalvic then i flashed 4.4 over it
when you first flash any cm9 fresh, not over a backup, you must flash twice. Joker has mentioned this many times that the scripts he has for the install have to run twice in order to fully install.
1. Flash cm9 (whatever beta you want)
2. Reboot recovery (in advanced in cwm)
3. Flash rom again
4. Flash gapps
5. Boot to system
You should be good to go now
sent from my Kick Ass MIUI MoPho using XDA premium
I have a sch-i500 that is rooted with cwm working.
I am very interested in running liquid smooth v 2.9 found here: http://forum.xda-developers.com/showthread.php?t=2245120
so I did a format, wiped the cache and davlik. when I installed the zip from external sd card the phone immediately gave me a screen for CWM v 6.0.3.3.
I can still navigate and restore old back ups but the phone does not go past the Samsung logo on the boot screen. Any advice is appreciated.
I was previously running stock 2.3.5 E09 if that helps
http://forum.xda-developers.com/showthread.php?t=1026746
seems to be the best way for me to recover from this (looks like I flashed a non voodoo rom without removing voodoo) but I am unable to get the phone into download mode with or without the battery in the phone.
please help......(update) Alright, I am a moron. needed to have a powered usb port. on my way to recovery. thanks for having all this great info in one place.
aircooledbusses said:
so I did a format, wiped the cache and davlik. when I installed the zip from external sd card the phone immediately gave me a screen for CWM v 6.0.3.3.
I can still navigate and restore old back ups but the phone does not go past the Samsung logo on the boot screen. Any advice is appreciated.
I was previously running stock 2.3.5 E09 if that helps
Click to expand...
Click to collapse
Oh so close.
When coming from 2.3.x ROM you will need to flash the rom (liquid: or other 4.2.x) you will need to flash 2 more times...
The 1st flash get you into the new recovery only,,, as you found out.
2nd flash will pop up with an error message about incompatible partition and telling you to re-flash again,,,
So 3rd flash actually installs your new ROM
Then install a current/compatible Google gapps
.
Enjoy
.
Thank you, I am getting closer.
still on the second and third flash of the rom I get a satus 7 error which I think is a bootloader issue.
I have flashed the GBbootloader.tar through odid to no avail and am following Section:4 How to flash any ICS 4.0.x & 4.x.x JellyBean based rom
http://forum.xda-developers.com/showthread.php?t=1238070
anythoughts?
aircooledbusses said:
Thank you, I am getting closer.
still on the second and third flash of the rom I get a satus 7 error which I think is a bootloader issue.
I have flashed the GBbootloader.tar through odid to no avail and am following Section:4 How to flash any ICS 4.0.x & 4.x.x JellyBean based rom
http://forum.xda-developers.com/showthread.php?t=1238070
anythoughts?
Click to expand...
Click to collapse
what does the error say besides status 7?
did you odin the CWM4 fixed for cm7 then install the ROM 3 times?
can you get a pic up for us to see?
just to be sure......using odin, I repartitioned with the pit, and flashed a E03 rom. rebooted the phone fine.
flashed the CWM4 fix for 7 and redid the GB bootloaders as well.
went into recovery and factory reset, wiped cache, and dalvik.
installed liquid-JB-v2.7-Official-fascinatemtd.zip this time first time took me directly to clockwork where I flashed again. prompted with install from sdcard complete. repeated and got same message.
factory reset, wipe, wipe and flashed gapps. Everything seems to have worked this time with the v2.7Official instead of 2.9. I will play with this for just a bit and probably try it again tonight with a fresh downloaded copy of v2.9. I really do appreciate your assistance and help and I would not have gotten this far without the forum.
update:
flawless installation of v2.9 since 2.7 was already installed. (installed via cloclwork mod recovery)
It was most likely an operator error that prevented me from installing 2.9 after E03. But I don't see the benefit of going back to recreate why it didn't work. Thanks again all is good and right.
hello,
i never posted here before but i am following this site for a while and flashed lots of roms using the data here.
i got into a problem trying to flash the kitkat on my HTC sensation 4G.
i am using ATM the android 4.2.2 CM 10.1 albinoman887 rom.
i tried installing the android 4.4.1 according the instructions posted by android1234567 here:
http://forum.xda-developers.com/showthread.php?t=2530073
i did factory factory reset, cache wipe, and davlik wipe
after that flashed the Kernel Aroma installer, the rom and the gapps from this link.
after i flashed them i rebooted and the phone doesnt pass the reboot screen, got stuck on it for few seconds and then restart and stuck again.
could anyone help me resolve this?
thanks ahead.
Dan
ok
if mean bootloop then again do the same step but wipe the dalvik cache,data,cache means clean your phone and then install the rom u will out of boot loop
tried it, it didnt work, still bootlooping.
when i install the gapps file it says it detects 4.4 rom.
any other ideas?
thanks for the help
SOLVED
hi, sorry bad english
i got a htc desire x and begann to read this tut about unlockinging, rooting, installing custom roms
http://forum.xda-developers.com/showthread.php?p=36138808#post36138808
i unlocked and rooted the dx, then i installed this rom: STOCK Jelly Bean with Sense 4+ build 2.20.401.6 for Desire X
http://forum.xda-developers.com/showthread.php?t=2239511
were not so happy, would try this one: ViMiRo ROM v1.0-1
http://forum.xda-developers.com/showthread.php?t=2797110
did a full wipe, installed the vimiro rom, Flashed boot.img from zip via fastboot and rebooted
but then the dx stuck on the cyanogenmod logo and nothing more happen
has anyone please a solution for this, or some tipps
SOLVED
4js said:
hi, sorry bad english
i got a htc desire x and begann to read this tut about unlockinging, rooting, installing custom roms
http://forum.xda-developers.com/showthread.php?p=36138808#post36138808
i unlocked and rooted the dx, then i installed this rom: STOCK Jelly Bean with Sense 4+ build 2.20.401.6 for Desire X
http://forum.xda-developers.com/showthread.php?t=2239511
were not so happy, would try this one: ViMiRo ROM v1.0-1
http://forum.xda-developers.com/showthread.php?t=2797110
did a full wipe, installed the vimiro rom, Flashed boot.img from zip via fastboot and rebooted
but then the dx stuck on the cyanogenmod logo and nothing more happen
has anyone please a solution for this, or some tipps
Click to expand...
Click to collapse
what recovery version do you have \ installer ? and post your bootloader details
the rom vimiro has not cyanogenmod logo
[
nek46 said:
what recovery version do you have \ installer ? and post your bootloader details
the rom vimiro has not cyanogenmod logo
Click to expand...
Click to collapse
recovery = twrp 2.6.30
bootloader details - not sure what you mean?
maybe this: hboot 1.25.002
i thought that the vimiro has no cm logo, but when i flashed the rom and fastboot the boot.img i got no errors, it says sucessfully and ok
4js said:
[
recovery = twrp 2.6.30
bootloader details - not sure what you mean?
maybe this: hboot 1.25.002
i thought that the vimiro has no cm logo, but when i flashed the rom and fastboot the boot.img i got no errors, it says sucessfully and ok
Click to expand...
Click to collapse
everything is correct, try another rom, I do not understand why not start the rom
4js said:
hi, sorry bad english
i got a htc desire x and begann to read this tut about unlockinging, rooting, installing custom roms
http://forum.xda-developers.com/showthread.php?p=36138808#post36138808
i unlocked and rooted the dx, then i installed this rom: STOCK Jelly Bean with Sense 4+ build 2.20.401.6 for Desire X
http://forum.xda-developers.com/showthread.php?t=2239511
were not so happy, would try this one: ViMiRo ROM v1.0-1
http://forum.xda-developers.com/showthread.php?t=2797110
did a full wipe, installed the vimiro rom, Flashed boot.img from zip via fastboot and rebooted
but then the dx stuck on the cyanogenmod logo and nothing more happen
has anyone please a solution for this, or some tipps
Click to expand...
Click to collapse
Try flashing another kernel. You somehow flashed the CM boot.img.
nightwalkerkg said:
Try flashing another kernel. You somehow flashed the CM boot.img.
Click to expand...
Click to collapse
Not quite... If he flashed CM boot.img for Sense ROM, he shouldn't see boot animation at all. What he obviously did is flashing a CM ROM and CM boot.img, but one that won't boot the CM ROM. Bootanimation is part of the ROM, not of kernel... So what I would suggest for @4js: Redownload ViMiRo Rom, also redownload any Sense JB kernel from Original Development you like, wipe your phone and reflash everything. That should solve your issues.
nek46 said:
everything is correct, try another rom, I do not understand why not start the rom
Click to expand...
Click to collapse
i tried [ROM][PA 2.99][4.1.2] Paranoid Android UNOFFICIAL [protou] with the double wipe and the gapps and finally
i now stuck at the new paranoid android logo,
nightwalkerkg said:
Try flashing another kernel. You somehow flashed the CM boot.img.
Click to expand...
Click to collapse
i did not, i really double checked it
dansou901 said:
Not quite... If he flashed CM boot.img for Sense ROM, he shouldn't see boot animation at all. What he obviously did is flashing a CM ROM and CM boot.img, but one that won't boot the CM ROM. Bootanimation is part of the ROM, not of kernel... So what I would suggest for @4js: Redownload ViMiRo Rom, also redownload any Sense JB kernel from Original Development you like, wipe your phone and reflash everything. That should solve your issues.
Click to expand...
Click to collapse
i will try and give feedback
not succeded
got it cheap from 2nd hand, could a hardware defect cause the problems?
4js said:
not succeded
got it cheap from 2nd hand, could a hardware defect cause the problems?
Click to expand...
Click to collapse
ok, what exactly did you try?
cause im a beginner in flashing smartphones, there are some things i don't understand
1) when i do a factory reset with twrp 2.6.3.0, there should be wiped data, cache and dalvik, .android_secure
but when i afterwards do a advanced wipe everything succeded, exept dalvik cache, there it fail
2) after a succeded factory reset without os installed, i reboot, and then also i stuck at a boot logo
shouldn't that not be wiped too?
could an other recover.img from http://forum.xda-developers.com/showthread.php?t=2502327 help?
the last succesful rom installed was cm-10.1-20140624-UNOFFICIAL-protou_v2.zip, not the one i wrote in first post
@dansou901
i tried different roms, exactly how it was explained, but never succedded, after rebooting i always stuck at the boot logo
4js said:
cause im a beginner in flashing smartphones, there are some things i don't understand
1) when i do a factory reset with twrp 2.6.3.0, there should be wiped data, cache and dalvik, .android_secure
but when i afterwards do a advanced wipe everything succeded, exept dalvik cache, there it fail
2) after a succeded factory reset without os installed, i reboot, and then also i stuck at a boot logo
shouldn't that not be wiped too?
could an other recover.img from http://forum.xda-developers.com/showthread.php?t=2502327 help?
the last succesful rom installed was cm-10.1-20140624-UNOFFICIAL-protou_v2.zip, not the one i wrote in first post
@dansou901
i tried different roms, exactly how it was explained, but never succedded, after rebooting i always stuck at the boot logo
Click to expand...
Click to collapse
Try the TWRP 2.5.0.0 for JB, it is reported to be most stable. Hopefully this resolves the issues for you.
dansou901 said:
Try the TWRP 2.5.0.0 for JB, it is reported to be most stable. Hopefully this resolves the issues for you.
Click to expand...
Click to collapse
thanks for quick reply, i will try and give then feedback
twrp 2.5.0.0 did it
it was a really full wipe, and now i'm at vimiro 1.01
thanks to everybody for the help, special thanks to dansou901 for helping and his excellent tutorial