I originally posted this in this thread http://forum.xda-developers.com/showthread.php?t=1634223 but I figured that is the wrong thread so Im making a new one locking for help...
So I'm having this trouble
I tried to flash my razr whit the version of Retail.BR (651.167.3370.XT910.Brasil.en.BR) and everything went just fine, after that I installed this blur version (Blur_Version.651.167.3370.XT910.Brasil.en.BR.zip) aka ICS. Everything ok in this point, after that I realized that my 3g dont work, so I tried to use the telcel stock version of this post http://forum.xda-developers.com/show....php?t=1624352 (actually Im using telcel) so when I tried this (very fool of my part) Im having this error whit RSD lite v5.7 "Failed flashing process. 6/22 flash cdt.bin "cdt.bin_signed" -> Phone returned FAIL." and my razr is showing this
AP Fastboot Flash mode (S)
0A.6C
To return to normal mode - first press power key to power down
Device is LOCKED, Statis Code: 0
Batery OK
OK to Program
Transfer Mode:
USB Conected
(Sorry for my lame english)
eurt said:
I originally posted this in this thread http://forum.xda-developers.com/showthread.php?t=1634223 but I figured that is the wrong thread so Im making a new one locking for help...
So I'm having this trouble
I tried to flash my razr whit the version of Retail.BR (651.167.3370.XT910.Brasil.en.BR) and everything went just fine, after that I installed this blur version (Blur_Version.651.167.3370.XT910.Brasil.en.BR.zip) aka ICS. Everything ok in this point, after that I realized that my 3g dont work, so I tried to use the telcel stock version of this post http://forum.xda-developers.com/show....php?t=1624352 (actually Im using telcel) so when I tried this (very fool of my part) Im having this error whit RSD lite v5.7 "Failed flashing process. 6/22 flash cdt.bin "cdt.bin_signed" -> Phone returned FAIL." and my razr is showing this
AP Fastboot Flash mode (S)
0A.6C
To return to normal mode - first press power key to power down
Device is LOCKED, Statis Code: 0
Batery OK
OK to Program
Transfer Mode:
USB Conected
(Sorry for my lame english)
Click to expand...
Click to collapse
Where are you from?
Sent from my XT910 using xda premium
pedrotorresfilho said:
Where are you from?
Sent from my XT910 using xda premium
Click to expand...
Click to collapse
I'm from Mexico
I'm going to say this...but by all means I'm not an expert..but I have been in a similar sitch.. however I'm in USA.. I downloaded the razrx tools.. fxz (always forget if its fxz or fxd..anyway it used to be called sbf..) had to do that about 3 times.. then used the razr tools...then fxz again the. Razr tools and I was unbricked.. however..I was stuck in a boot loop. Hope it helps! Let me no!!.
Sent from my DROID RAZR using xda premium
Related
hi there. i got the motorola droid from Agentina. does any one knows where i can find the original room. pls.
phatdu said:
hi there. i got the motorola droid from Agentina. does any one knows where i can find the original room. pls.
Click to expand...
Click to collapse
There isn't any firmware from argentina yet but if u want i can upload a nandroid from personal stock.
Enviado desde mi XT910 usando Tapatalk
phatdu said:
hi there. i got the motorola droid from Agentina. does any one knows where i can find the original room. pls.
Click to expand...
Click to collapse
I think Agentina use LATAM (LAtin AMerika) version. I'm not sure, but you can try this fastboot file:
http://forum.xda-developers.com/showthread.php?t=1362956
elias.parasini said:
I think Agentina use LATAM (LAtin AMerika) version. I'm not sure, but you can try this fastboot file:
http://forum.xda-developers.com/showthread.php?t=1362956
Click to expand...
Click to collapse
i try all those room but didn't work yet.
phatdu said:
i try all those room but didn't work yet.
Click to expand...
Click to collapse
What are u using? RSD or Fla****? Go to AP Fastboot on your razr, connect your razr to PC, & flash this with RSD or Fla****:
Branding: RETAIL en.BR
Market Segment: LATAM
Version: 651.73.250
Android Version: 2.3.5
SLC: 25
ROM Type: CFC
Radio Version: N/A
Bootloader Version: N/A
Webtop version: N/A
Download:http://dlhg.eternityproject.eu/mtspyder/official/xt910/6.5.1_73_SLC-25_SIGNLATAM_USASPYRETBRLA_P016_P019_A013_A014_HWp2b_CFC_fastboot.xml.zip
I think it should work..
i didn't use RSD or Fla****. i will try again with either one. tks for your help. btw, can i find RSD or Fla**** around here?
how can i use RSD or Fla**** pls.
i got this message
######################################
# EternityProject's FastBoot FlashME #
# #
# If you wanna support us, donate to #
# kholk -- [email protected] #
# #
# or come on our Website! #
# http://forum.eternityproject.eu #
# #
# Happy Flashing! #
######################################
ECHO is off.
Flashing BootLogo....
error: cannot load 'logo.bin'
Flashing EBR....
error: cannot load 'ebr_signed'
Flashing MBR....
error: cannot load 'mbr_signed'
Flashing DevTree....
error: cannot load 'devtree_signed'
Flashing Android System....
error: cannot load 'system_signed'
Flashing Kernel....
error: cannot load 'boot_signed'
Flashing Android Recovery....
error: cannot load 'recovery_signed'
Flashing CDR....
error: cannot load 'cdrom_signed'
Flashing Radio (BP)....
error: cannot load 'radio.img'
Flashing WebTop....
error: cannot load 'webtop_signed'
Erasing Cache....
erasing 'cache'... OKAY [ 0.036s]
Rebooting....
rebooting...
ECHO is off.
ECHO is off.
i did it agian. it show that fail because of battery. now phone the on show that flash failure. what can i do?
phatdu said:
i did it agian. it show that fail because of battery. now phone the on show that flash failure. what can i do?
Click to expand...
Click to collapse
You use Fla****?
Sorry, I forget to tell you:
1. Download & instal MotoHelper so your PC can recognize your razr
2. Extract the Fastboot zip file
3. Extract the Fla**** zip file, then put in to the Fastboot file you've extract in number (2)
4. Make sure your razr FULLY CHARGED
5. Go to Setting > Applications > Unknown sourced and check it > choose Yes
6. Go to Setting > Applications > Development > USB debugging & check it > choose Yes
7. Turn off your razr
8. Turn on your razr while press & hold POWER+VOLUME_UP+VOLUME_DOWN until you get to Boot Mode Selection Menu
9. Highlight: AP FastBoot by pressing VOLUME DOWN, then select it by pressing VOLUME_UP
10. Now your razr should on AP Fastboot Flash Mode, connect your razr to your PC
11. Flash it!!
Hope these help
now i can't even charge my phone. it failed in two time flash. what can i do now. pls.
phatdu said:
now i can't even charge my phone. it failed in two time flash. what can i do now. pls.
Click to expand...
Click to collapse
I think your razr still chargable, try to charge your phone with charger that came with your razr. See the LED light on your razr. I'm not sure but try to charge it for about 2 hour.
After that, go to AP Fastboot Mode Selection and see if "BATTERY OK", if it is, do flash again
i try to plug into charger but there is LED light. are u in USA? if u have time, can you fix it pls.
phatdu said:
hi there. i got the motorola droid from Agentina. does any one knows where i can find the original room. pls.
Click to expand...
Click to collapse
Olla!
You can upload any Latan.BR ROMs from kholk's post in Razr Ginferbread UMTS Files. There yoy''ll find a branded Vivo version (newer) and other unbranded. Flash with RSDLite and test main features, like Gps, Wi~Fi, Cam and the headphone.
Thank's
Sent from my XT910 using Tapatalk
phatdu said:
now i can't even charge my phone. it failed in two time flash. what can i do now. pls.
Click to expand...
Click to collapse
You bricked ur Razr. You'll need a 'factort cable'. Search the forum to learn how to make one. Wish you lucky
Sent from my XT910 using Tapatalk
sound like i should give up and live my motorola droid razr brick alone.
hi elias.parasini:
i did flash it as ur instructions, every ok. but when i reboot it it say can't mount, find.... some file in E\...\... now what should i do????
i did it. thank you very much. my droid razr lives now lol
hi elias.parasini
i jsut wonder that i can get the update OTA or i need to flash it again when the new update come out? tks
phatdu said:
i did it. thank you very much. my droid razr lives now lol
Click to expand...
Click to collapse
Hehehe, glad to hear that. Enjoy your "reborn" razr
Sent from my DROID RAZR using XDA App
Hi,
With ATT 4.5.91 rooted unlocked phone upgrading to 4.5.141, the process failed after RSD lite 99% completed, the atrix stoped there with the message as follows:
"fail to boot 1 PwrReason: PWR_KEY_PRESS
Starting fastboot protocol support", and I re-fastbooted and
found out "recovery error 0x180004" and "OEM unlock is not implemented".
Please help. Thanks a lot.
If you still have full battery life you will need to flash 1FF-olympus-user-2.3.4-4.5.91-110625-release-keys-signed-ATT-US-GAS_NA_OLPSGBATTSPE_P011-unlocked.sbf. I'm guessing you flashed 1ff-olympus-user-2.3.4-4.5.91-110625-release-keys-signed-att-us-gas_na_olpsgbattspe_p011.sbf....I had this exact issue just yesterday. But you have to have a full life battery or at least enough to fully flash otherwise you're in serious trouble after that. By the way, what method were you using to upgrade to .141? It's not recommended on an unlocked bootloader though I tried it over Moto software update and it worked fine (only tried this cus the OTA update screwed up my wifi and bluetooth). Hope the info helps, good luck!
weisey9 said:
If you still have full battery life you will need to flash 1FF-olympus-user-2.3.4-4.5.91-110625-release-keys-signed-ATT-US-GAS_NA_OLPSGBATTSPE_P011-unlocked.sbf. I'm guessing you flashed 1ff-olympus-user-2.3.4-4.5.91-110625-release-keys-signed-att-us-gas_na_olpsgbattspe_p011.sbf....I had this exact issue just yesterday. But you have to have a full life battery or at least enough to fully flash otherwise you're in serious trouble after that. By the way, what method were you using to upgrade to .141? It's not recommended on an unlocked bootloader though I tried it over Moto software update and it worked fine (only tried this cus the OTA update screwed up my wifi and bluetooth). Hope the info helps, good luck!
Click to expand...
Click to collapse
WEISEY9 thanks, I failed the OTA to 2.3.4-4.5.141, so I used manual update using sd card to update.
Sorry I can't find out the unlocked.sbf you mentioned above. Can you inform where I can download it. Thanks again.
This happened to me before, just open rds lite, connect ur phone yo ur PC, if is not!! It might be detected like fast mode on rsd lite on ur PC!! Pull out the battery, till fastmode(status) disappears from rsd lite! ( u can try power button + volume up key I don't remember how I get it) then just use pudding (the small file, ) ..
Sent from my MB860 using XDA App
fail to boot 1 updating to ATT 2.3.6 4.5.141
narezese said:
This happened to me before, just open rds lite, connect ur phone yo ur PC, if is not!! It might be detected like fast mode on rsd lite on ur PC!! Pull out the battery, till fastmode(status) disappears from rsd lite! ( u can try power button + volume up key I don't remember how I get it) then just use pudding (the small file, ) ..
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
Yes that is the reason I request for help to get pudding or UNLOCKED.sbf to flash back to ATT 2.3.4 4.5.91.. As in China I can't access to those websites that provides said file as below (don't know what is the reason).
"1FF-olympus-user-2.3.4-4.5.91-110625-release-keys-signed-ATT-US-GAS_NA_OLPSGBATTSPE_P011-unlocked.sbf."
Please help if you can acess the file please send to my email below
"[email protected]" Thanks.
The file size is big
Before some of you gets upset with me posting the same kind of question, please know that I looked at the forum everywhere plus some other forums and tried almost everything. Here's the summary.
I recently got Droid Razr Asia version and I upgraded to EU Retail rom n rooted it.
There was one problem that I noticed that only bluetooth was not working.
Checked online, and found out that it's the radio mismatch b/w EU and Asia version.
So I downloaded RAZRX rom and was trying to flash it again with bootstrap.
So the process started and in 10 seconds it failed.
So I tried to search other forums ...
at some place i found that ... after Hard Resetting, clearing catche; I am also supposed to format the system.
So I followed the whole procedure, and turns out that again it does not get FLASHED. So I downloaded the ASIA version again and tried to format. It did not work. I tried with EU version, it did not work.
So after getting tired, I tried with RSDLite to flash through PC.
That's when I found out that ...
It detects the phone ... but the phone has no EMEI, software version or any other details. Everything is n/a.
Still I tried, and it said "fastboot installation failed" or somethin like that.
And now my phone is stuck on red motorola logo.
I tried to power off and go to bootloader fastboot ...
and it says "Fastboot Locked ... Press power button to power down."
I tried with the DroidRazrUtility1.4 also ...
But it does not detect the phone.
I tried other few things I found online. But nothing worked.
I also drained the battery by keeping it aside to see if the fastboot gets unlocked, but it didn't work.
However, I haven't removed the battery yet. Cause I do not have the tools.
Please can somebody tell me step by step approach how to do this?
Because I haven't found out where I am going wrong in the given methods. and btw, I have followed everything exactly step by step.
Really appreciate any kind of help.
Thank you very much.
Try to flash with RSD Alternative
http://forum.xda-developers.com/showthread.php?t=1453660
Thanks a ton.
But will it still work if my AP FATBOOT mode says that "Device is Locked"
And the battery is on low?
samthehell said:
Thanks a ton.
But will it still work if my AP FATBOOT mode says that "Device is Locked"
And the battery is on low?
Click to expand...
Click to collapse
Probably not. I read on one of the forums there might be a way around the battery being low. I think it was here in xda. Do a search for fast boot install or battery, something like that. If you find that doesn't work you would have to make the tbh cable which allows power to the phone without a battery, or in your case a near dead battery.
Sent from my Droid Razr using Tapatalk
"Device is locked" is natural, (almost) all of our bootloaders are locked. Nothing to do with flashing official ROMs.
You'll need to make a factory cable if the battery is low, search the development forum for a guide.
Sent from my XT910 using xda premium
Thank you all ... Just ordered the cable. Hope it works.
Appreciate all the help.
samthehell said:
Thank you all ... Just ordered the cable. Hope it works.
Appreciate all the help.
Click to expand...
Click to collapse
Here is where u can find full 2.3.6 Asian fastboot file, so you can use rsd for flashing 2.3.6 but for flashing 2.3.5 you have to use Alternative rsd because of bl version
http://forum.xda-developers.com/showthread.php?p=22821170
Sliced by my Razr on Tapatalk
Hi people,
well, i did something stupid and now everytime i turn on my razr i see the screen down below.
I can use the menu to go to normal boot and use the phone without other incoveniences, but, obviously, i would like to fix it.
I have seen some similar threads but couldn't understand how to fix it.
I'm now on ICS 4.0.4 (Stock,Brasil) and got here from GB.
I believe the problem happened when i was trying to install the china or europe versions, but i can't remember the script i was following (yes pretty stupid, i know).
may someone please give me some light.
Thank you all.
____________________________________
AP Fastboot Flash Mode (S) (Flash Failure)
OA.74
Device is LOCKED. Status Code: 0
Battery OK
OK to Program
Connect USB
Data Cable
____________________________________
Happened to me on droid bionic... all u have to do is flash back to stock using rsdlite and all will be fixed
Sent from my DROID BIONIC using Tapatalk 2
you can try droid razr utility 1.6 that should work. Should be easier than RSD lite and its automagic.
http://forum.xda-developers.com/showthread.php?t=1634223
Sent from my XT910 using XDA
Thank you doenis! It worked perfectly.
I didn't knew it is that easy to open the razr.
it was very fast to disconect the battery and then... well, just worked.
I have same problem. anyone can help me due with it ? thanks so much. sorry because my E.L is not good.
my problem is because I flash xt910 file to my xt912. and I did flash rom stock of xt912, and this is result !
---------- Post added at 06:40 PM ---------- Previous post was at 06:08 PM ----------
ttoomm said:
Thank you doenis! It worked perfectly.
I didn't knew it is that easy to open the razr.
it was very fast to disconect the battery and then... well, just worked.
Click to expand...
Click to collapse
how did u do ?
solved
go to.
http : / / www droidrzr. com/index.php/topic/3741-boot-logo-changer-monkeymouth-edition-edited-10-24-12/
DL the monkeymouth and either change the boot logo or restore the original one (no need to root or change phone software) 45 second process
ttoomm said:
Hi people,
well, i did something stupid and now everytime i turn on my razr i see the screen down below.
I can use the menu to go to normal boot and use the phone without other incoveniences, but, obviously, i would like to fix it.
I have seen some similar threads but couldn't understand how to fix it.
I'm now on ICS 4.0.4 (Stock,Brasil) and got here from GB.
I believe the problem happened when i was trying to install the china or europe versions, but i can't remember the script i was following (yes pretty stupid, i know).
may someone please give me some light.
Thank you all.
____________________________________
AP Fastboot Flash Mode (S) (Flash Failure)
OA.74
Device is LOCKED. Status Code: 0
Battery OK
OK to Program
Connect USB
Data Cable
____________________________________
Click to expand...
Click to collapse
Much obliged
This was always so annoying. Thanks for the help!
Hi
Please assist in this regard, I rooted my device and installed Rom Manager, and tried to flash MIUI Rom. My devices rebooted but were stuck on the Moto boot screen. I tried system recovery by holding down volume+- & power button, and it indicated my device were locked. My battery is flat and I'm unable to charge the battery at all. firmware 65.1.40.XT910.MERetail.en.06 Android Ver : 2.3.6. How do I get my device to work again amd where can I find the original Rom to flash with RSD lite ???
You feedback would be much appreciated.
Regards.
http://forum.xda-developers.com/showthread.php?t=1539192
This should get you started. You can try an old school battery pull (yes it is possible to remove the back, just have to pry like hell)
EDIT: Found a video on youtube for exactly this scenario.
http://m.youtube.com/#/watch?featur...ch?v=QfT2Bejkcdk&feature=youtube_gdata_player
Good luck mate
Sent from my XT912 using xda premium
Team black hat adapter
shop.teamblackhat.info/Factory-Adapters-motadapt.htm
I recommend getting a tbh adapter. It lets you power the phone directly from USB even with a dead battery. After that you need to use RSD liter or a similar tool to fastboot he phone back to stock.
Resolved Problem !!!
Thanks a lot guys, i manage to fixx the problem, i made my own factory cable charge for 1 hour and flashed a stock ROM with RSD lit 5.7, works fine
Bricked Razr XT910
My razr xt910 is bricked,whenever i turn it on it goes to fastboot with the following message:Ap Fastboot Flash Mode (flash failure)
Battery Low(No matter how much i hcarge it) ,Please Need Help,
Bought From London
arendshp said:
Thanks a lot guys, i manage to fixx the problem, i made my own factory cable charge for 1 hour and flashed a stock ROM with RSD lit 5.7, works fine
Click to expand...
Click to collapse
lol... Am I high or did you just shoved 5v on your Razr 3.7v battery directly from the usb port?
please help me,the razr is bricked ,it says locked and rsd is not detecting it,ive been trying to unbrick for the last 4 hours.pleas help
arendshp said:
Thanks a lot guys, i manage to fixx the problem, i made my own factory cable charge for 1 hour and flashed a stock ROM with RSD lit 5.7, works fine
Click to expand...
Click to collapse
Your picture inspired me so I just made a factory cable, pretty easy.
Bricked MOTOROLA xt910s
Dear concerns,
I was using MOTO xt910s Korean, during the software updating its bricked and I didn’t take any recovery backup. 1st my phone start and struck on LOGO and also go to recovery mode, but after that I discussed with one developer and he has changed the KERNAL of my mobile, now it only on in AP fastboot Mode. I am so worried about my phone, please give me solid solution. And 1 thing more during all that its battery also dead, I am also searching new battery.
I am waiting for your best and earlier response.
Thanks & Regards,
Usman
usman.yousaf said:
Dear concerns,
I was using MOTO xt910s Korean, during the software updating its bricked and I didn’t take any recovery backup. 1st my phone start and struck on LOGO and also go to recovery mode, but after that I discussed with one developer and he has changed the KERNAL of my mobile, now it only on in AP fastboot Mode. I am so worried about my phone, please give me solid solution. And 1 thing more during all that its battery also dead, I am also searching new battery.
I am waiting for your best and earlier response.
Thanks & Regards,
Usman
Click to expand...
Click to collapse
Wipe cid with fastboot.Use CMD to flash a EU Jellybean.
Sent from my XT910 using xda app-developers app
Need Solution of bricked MOTO XT910S
我顶你个肺隔膜 said:
Wipe cid with fastboot.Use CMD to flash a EU Jellybean.
Sent from my XT910 using xda app-developers app
Click to expand...
Click to collapse
Dear i am not a developer, i am a noob, please provide me easy way to flash my phone. please support me i am so worried
usman.yousaf said:
Dear i am not a developer, i am a noob, please provide me easy way to flash my phone. please support me i am so worried
Click to expand...
Click to collapse
Maybe english is too bad to explain this..
http://pan.baidu.com/share/link?shareid=1379604126&uk=4010743545
Rember to wipe your Cid first.
Download this,extract all the files content inside to where your extraxted EU Fastboot file is.And run the 运行我.bat,this will flash the EU ROM to your phone.This thing may damge your phone(Im using it with no problem),I wont pay any responsibility to any damge to your data,hardware or anything.
Sent from my XT910 using xda app-developers app
How Did You Do This?
arendshp said:
Thanks a lot guys, i manage to fixx the problem, i made my own factory cable charge for 1 hour and flashed a stock ROM with RSD lit 5.7, works fine
Click to expand...
Click to collapse
I'm in the same situation and need to charge my bricked XT910. If I can only do it the way you did, I could take it from from there with returning to stock ROM. Please show me how you did this. Thanks!
Daddyoyah said:
I'm in the same situation and need to charge my bricked XT910. If I can only do it the way you did, I could take it from from there with returning to stock ROM. Please show me how you did this. Thanks!
Click to expand...
Click to collapse
Motorola Fastboot/Factory Programming Cables Links
Sent from my XT907 using Tapatalk