[Q] Zune wont detect my phone - 7 Mozart General

I might of done something awhile back, I haven't connected my Mozart to my computer in 4 months. But now Zune wont connect to my phone.
So i tried on a laptop and similar result.
My computer says my phone needs an update. Laptop says nothing...
It recharges.
Im running custom version: Nextgen+3.2
But i was running a totally different custom firmware before and had a same issue. I restored the phone.
I dont want to offically update my phone.
I tried this:
http://www.zune.net/en-us/support/sync/solvingproblems/doesntdetectphone.htm

Related

Computer dies when I connect the phone

Hi.
I wanted to update my x10 mini pro to the latest firmware. It didnt work throught the updater, it said I had the latest but I didnt (i had Baseband 006 - kernel 2.0.A.0.504). So I followed this rendeiro2005 "[FLASHTOOL GUIDE] HOW TO for n00bies" I downloaded the nordic version, but nothing happend, tried to update it but still said there where no updates. So then I downloaded the UK version, then It found the new update, it worked halfway through the update and then the computer died.
Now either nothing happens, I mean it doesnt find the phone via usb, or the computer dies. I tried to uninstall/reinstall PC companion with revo uninstaller, didnt work. Then I tried to start the computer in safe mode and that didnt work either. And I have tried all three different ports. I tried to turn of the phone and connect it and then the computer snap shutdown. (the usb worked fine all day today before I tried to upgrade).
Thanks
Now I¨ve tried to uninstall flashtool and the drivers installer that comes whith it, also uninstalled PC companion. And used the guide "how-to-remove-old-unused-device-drivers-in-windows-7" to deleted some drivers that I suspected have something to do with the phone. At least the computer doesnt die now. But still it doesnt find the phone when I plug it in. I tried the "silent mode trick", but didnt work either.
I dont think theres something wrong with the phone. I did a backup with titanium before but I cant get to it now since the phone isnt rooted anymore after the FW update.
Do you have the Debugging mode enabled? if you have it, try disabling.
Ya tried that to. No success. Even formatted my computer. Nothing. Then I wanted to charge the phone, ordanary rechargeching, that didnt work either. So it must be something with the phone. Have no clue how to get around it. Tried hard reseting it also. Nothing. I guess is something with the new firmware upgrade. Is there any way to go back without using usb?
Is there a way to update/downgrade it wireless?
If the usb is broken, can I send it to SE and have it repaired? (The phone is secondhand without reciept)
You can send it to the SE care centre to get it repaired but you will have to pay because it is out of warranty.
regarding your pc, does usb work other than your phone? im wondering how a connection like that to the phone makes the pc go dead!
There maybe something with the pc or the phone. check with the hardware wires are connected properly and try some other usb device (pendrive etc) and check if the usb works well. then you dont need to doubt about the pc next time.
if pc works then you have to check with your phone and see if that doesnt work.
Other than that i dont know if it will be software (windows xp,7, or other s/w) matter but something on hardware. doubting the phone. so please check it out.
Thanks and good luck on your search!
Do you know how much it can cost to get it fixed?
Ive tried to reinstall windows, didnt work. Tried linux, didnt work. Ive tried other usb devices and they work. After reinstalling the phone doesnt kill the computer anymore atleast. So I guess its the phone. I wont charge when its of either.
Everything worked fine halfway through the update with pc-companion. After that the phone lost connection and never got it back since. What do you think, any chances?

[Q] Updating an Unlocked galaxy s2

Hi can anyone help me I have unlocked my phone to all networks but have been told if I update via Kies
it will lock my handset back to previous carrier ( T Mobile )
I really want to update my os and can't find a way of doing it any help or pointers would be appreciated.
Currently running 2.3.4
kernel I900XXKG1-CL349526
Build GINGERBREAD,XXKG1
You can upgrade to ics and pay to unlock.
If it was me,Id upgrade to 4.0.3 by flashing an unbranded firmware from sammobile(for my region).
Then root,then nand/efs backup,then use one of the free unlock apps on here/play(if required).
Rachmats ics rooting
Odin
Hktool
Helroz unlock
Triangle away
Then Id stick on rootbox/dremkernel.........lol
I have already downloaded firmware from Sam's, phone is currently connected via odin flashing firmware.
This has been running for about an hour now, thou there are still signs of action on my laptop HD.
how long should this process take ?
10 mins tops.
Disable kies and try.
I hope in the last 2 hours youve done some reading about the stuff I listed rather than diving in and ballsing things up.
I have disabled kies and tried again thou it looks like it's still not having it.
Half of what I have been reading is only starting to make sense now i'm getting my head around all this.
If you flash any rom from this site or samfirmware should not lock your phone again. It will stay unlocked.
If only I could get one to load up, fortunately I haven't bricked my phone thou I appear to have an ADB driver issue.
Only noticed this when using a later version of odin, I found a guide relating to this issue, I will give this a try shortly, fingers crossed.
It would appear I have an issue with the ADB drivers.
I have done a fresh install on another laptop, installed Kies looked for updates still no joy.
Then I even tried Heimdall 1.3.1 for os x no joy there either.
Now I am looking into finding and installing the ADB drivers from another source,
I have also tried downloading drivers from sammobile no joy there either.
Can anyone give me some advice on this.
I am trying now to install drivers in compatibility mode with xp. i'm currently running vista.
I checked properties in device manager and status of ADB is > This device cannot start (code 10)
This driver only shows when phone is attached via USB, I have tried to update via device manager
Still no joy
Finally having wiped my laptop and reinstalled windows, installed drivers, odin, connected phone,
I got a pass, 3 roms a CF root later, I settled for an unbranded UK ICS 4.0.4,
rooted phone with appropriate CF kernel,restored data. Tidy, well worth the effort.

S3 Bricked [Soft?]

Hello all, I have a GS3 international GT-I9300
I'll try to go through the story as fast as I can and give as much detail so you guys can understand how I got here.
Bought the phone unlocked, I was stock, I rooted and then I decided to install a new ROM. I went with Resurrection Remix, it was working great. I did this on a desktop back home. They released a new update to RR so I did a OTA update with "Update Me" apparently the thing flashed but it didn't, the phone still worked but NFC wasn't working as well as having lost root access and some other stuff wasn't working correctly, but I lived with it.
I moved to Florida (home is in NY) and I have a laptop with me, for some reason my laptop used to be able to transfer files to my S3, but it wasn't doing it any more after a while. So it would just charge it. I was in a hotel room last week trying to tether via USB but the PC wasnt having it, it could not locate the phone. This week I moved to a different hotel with internet and decided I would flash stock on my S3 to get rid of all these bugs and get root again, I tried flashing stock through recovery and it wasn't going, so I tried flashing RR again (this time downloaded from the site RR site) and it worked. Still no USB connection but I had root back. I looked around my PC and apparently the Samsung drives are not installing or something on my PC. I installed Kies, but nothing, I tried a stand alone driver install and nothing, so I just gave up and bought Mobile Odin pro from Gplay to try to flash again.
Mobile Odin for some reason (I blame it on myself) wasn't finding/flashing stock so again I decided to try and flash RR and see what would happen. It flashed RR and turned on fine. Then I just decided to look for an NFC fix on XDA. Once I found my NFC fix (http://forum.xda-developers.com/showpost.php?p=32029713&postcount=8367) I decided to just copy the files to the system folder, NFC still not working, rebooted and NFC still no working, so I figured I would try to flash the fix through mobile odin seeing as how I can't get my PC to pick up on the USB. I tried flashing but MO just kept bouncing it back and re-booting into RR. Tried again and no flash. So I decided to again try and flash stock. I tried going into Recovery, the phone shut off like it always does, came back on but stayed in the Galaxy S3 GT-I9300 logo and would not move. I shut it off again, tried turning it on again and still stuck on the galaxy logo. Now, if I leave the phone off and plug in the USB, it won't show the battery charging image, it will actually turn straight onto the galaxy logo again and stay there. I can get the phone into download mode, but like I said my pc won't recognize the drivers.
Now, here are my questions:
What happened?
Can this be fixed?
Am I an idiot?
If I can get the drivers installed on another PC as well as Odin (1.85), will the new PC "see" the S3 or are the drivers on the phone deleted as well? (if that sort of thing can happen, idk.)
I'm going to see if I can borrow a buddy's PC and download the drivers as well as odin to try and bring my S3 back to life, I just want to know, what happens if I can't get the other PC to pick it up ether because the drivers on the phone are deleted (if that's a thing) or what I can expect if it is connected.
What are the steps or guides to follow here? I just got it into Download mode and it says on the top of the screen:
ODIN MODE
Product name: GT-I9300
Custom Binary Download: Yes (2 counts)
Current Binary: Custom
System Status: Custom
sorry , i am sometime getting headache reading long english text so i just briefly look over.
your PC doesn't recognize your S3 ? is that correct ? hmmm , is it possible that your PC (Microsoft Windows I assume?) system is damaged due to something like virus or some reasons ? i have encountered that kinda problem before and be OK after i reinstalled the system.
If it's a soft brick, then it can defiantly be fixed. You might, however, lose your data along the process.
Be glad it's not hard bricked
It happened to me many times, USB error "unknown device" connected. Only fix for it was reinstalling Windows so better if you can use different PC or laptop. Install Kies and other USB drivers. Restart computer, download and run Odin v 3.0x. Flash your phone.
If this doesn't work then maybe your phone have a problem with USB port?
Sent from my GT-I9305 using xda app-developers app
djembey said:
It happened to me many times, USB error "unknown device" connected. Only fix for it was reinstalling Windows so better if you can use different PC or laptop. Install Kies and other USB drivers. Restart computer, download and run Odin v 3.0x. Flash your phone.
If this doesn't work then maybe your phone have a problem with USB port?
Sent from my GT-I9305 using xda app-developers app
Click to expand...
Click to collapse
Don't forget to delete kies as you only need the drivers
Sent from my GT-I9300 using Tapatalk 2
Thanks for the replies guys. I'll try to fix tit today, I didn't get a chance to do it last night. If anything I'll update you guys with what's going on.
Like I was saying, I'll try using a different PC to fix it. Now, if I can't get Odin to recognize the phone, what would be the next step?

[Q] Sprint gs3 doesnt connect to my pc win7

im pretty good with changing roms and doing back ups and all that good stuff. but i installed a 4.3 rom and it wouldnt connect to my pc after that, so i went back to the back up i made and still no connection, so i decided to just do a factory reset to see if that was the problem and it wasnt. ive tried multiple usb cords. no good. i have all drivers installed in my pc and still no connection. all it does is charge. so now im stuck with no root. and doesnt connect to my pc. ive tried the phone thing it was like *#8734# or something like that, just would like to get my s3 to connect again. anyhelp?
What else can i try?
Decotra said:
im pretty good with changing roms and doing back ups and all that good stuff. but i installed a 4.3 rom and it wouldnt connect to my pc after that, so i went back to the back up i made and still no connection, so i decided to just do a factory reset to see if that was the problem and it wasnt. ive tried multiple usb cords. no good. i have all drivers installed in my pc and still no connection. all it does is charge. so now im stuck with no root. and doesnt connect to my pc. ive tried the phone thing it was like *#8734# or something like that, just would like to get my s3 to connect again. anyhelp?
What else can i try?
Click to expand...
Click to collapse
first I would suggest you to choose the right forum.
this here is i9300 international s3
sprint s3 forum: http://forum.xda-developers.com/galaxy-s3-sprint

[Q] HOX+ is not recognized by pc

Hi,
As the title suggests, my HOX+ is no longer being recognized by my pc. I tried to install/reinstall the drivers numerous times,failed.
I tried with htc sync, it says that there is no device connected.
I tried different usb chords still nothing.
The funny thing is that whenever i plug it in, after it says that it failed to install the devices, in the device manager the phone is listed as a "ONE".
Oh and if i plug the phone in my laptop i am able to access it with no problems.
And the whole thing is driving me insane.
device is rooted, running cyanogenmod ver 10.2.1-enrc2b.
After a lot of searching and little info found, i decided to bite the bullet and reinstall my os.
It worked, now my device is fully installed and operational

Categories

Resources