[Q] Dead Active - Sony Ericsson Xperia Mini, Mini Pro, Xperia Pro, A

Hey, everyone.
I'm trying to fix my brother's Active and not having much luck. I've been doing intermediate level android stuff since the HD2, so I'm not quite a rookie at troubleshooting. He said that he was at school, checked his texts, then the screen went out. So, that's where I'm at. I can't even really tell if it's a software error or a hardware error. The phone turns on, vibrates and the LED lights and that's about it.
Thanks for any help

Looks like it's bricked... but I'm not expert enough to say that for sure.

Feanor88 said:
Looks like it's bricked... but I'm not expert enough to say that for sure.
Click to expand...
Click to collapse
Thanks for the input, no offense, but I hope you're wrong. Haha

If you had unlocked bootloader: Flashtool
If you had locked bootloader: Update Service and try repairing the firmware.
Both ways, you lose your data.

try to repair it via SEUS or pc companion or otherwise send it in to repair
Sent from my SK17i Using xda premium

Someguyfromhell said:
If you had unlocked bootloader: Flashtool
If you had locked bootloader: Update Service and try repairing the firmware.
Both ways, you lose your data.
Click to expand...
Click to collapse
I've tinkered with Flashtool, but I'm not really sure what to do... I also tried SUS without success

Hammett11 said:
I've tinkered with Flashtool, but I'm not really sure what to do... I also tried SUS without success
Click to expand...
Click to collapse
See my tutorial to root (Check Signature). There in the first step, you will learn how to flash a ROM using flashtool. Choose and firmware of your choice, and taking help of the tutorial flash it using flashtool.
For another tutorial you can check someguyfromhell's sticky at this forum.
Thanks,
Rick
Sent from my SK17i using XDA

DragonClawsAreSharp said:
See my tutorial to root (Check Signature). There in the first step, you will learn how to flash a ROM using flashtool. Choose and firmware of your choice, and taking help of the tutorial flash it using flashtool.
For another tutorial you can check someguyfromhell's sticky at this forum.
Thanks,
Rick
Sent from my SK17i using XDA
Click to expand...
Click to collapse
Thank you very much for the tutorial. I flashed it and now when I try to turn it on, The red LED is blinking three times.

Hammett11 said:
Thank you very much for the tutorial. I flashed it and now when I try to turn it on, The red LED is blinking three times.
Click to expand...
Click to collapse
Charge your battery

Someguyfromhell said:
Charge your battery
Click to expand...
Click to collapse
Please, don't tell me that the battery was dead from the beginning................

Feanor88 said:
Please, don't tell me that the battery was dead from the beginning................
Click to expand...
Click to collapse
No, thankfully I didn't make THAT mistake, or my previous post probably would have been my last ever. I charged it and, unfortunately, am back to square one. Same as the original problem

I have some experience with active.
Can you tell me more specific.
1.About the problem
2.modding history of the phone.(like root or unlock bootloadet)
Sent from my ST17i using Tapatalk 2

puppet13th said:
I have some experience with active.
Can you tell me more specific.
1.About the problem
2.modding history of the phone.(like root or unlock bootloadet)
Sent from my ST17i using Tapatalk 2
Click to expand...
Click to collapse
The phone does absolutely nothing except vibrate a tiny bit when you turn it on. So the most frustrating part, to me, is I can't really tell if it's a hardware error or software. I'm leaning toward software because even after I let it boot for a long time, I can't get the screen or any of the buttons to cause a vibration. BUT I also don't know if my brother had it set to vibrate on the lock screen like I always do.
From messing around with Flashtool I found out the bootloader is unlocked, but nothing custom has been done to it.

Hammett11 said:
The phone does absolutely nothing except vibrate a tiny bit when you turn it on. So the most frustrating part, to me, is I can't really tell if it's a hardware error or software. I'm leaning toward software because even after I let it boot for a long time, I can't get the screen or any of the buttons to cause a vibration. BUT I also don't know if my brother had it set to vibrate on the lock screen like I always do.
From messing around with Flashtool I found out the bootloader is unlocked, but nothing custom has been done to it.
Click to expand...
Click to collapse
Hmm...I'm very sure and no doubt that your phone hardware got some problem...
XDA Premium sent this message from owner of Sk17i

UchihaDareNial said:
Hmm...I'm very sure and no doubt that your phone hardware got some problem...
XDA Premium sent this message from owner of Sk17i
Click to expand...
Click to collapse
So you think it's the screen? Is there a way to check without actually replacing it?

UchihaDareNial said:
Hmm...I'm very sure and no doubt that your phone hardware got some problem...
XDA Premium sent this message from owner of Sk17i
Click to expand...
Click to collapse
+1 with this
Okay,let says the screen got problem.the screen just have blank display right?
Try to put a sim card that doesn't have security pin when turn on.
After turn on wait for a few minutes and the try to call it.if the phone rings.the display surely defective.
Sent from my ST17i using Tapatalk 2

Hammett11 said:
So you think it's the screen? Is there a way to check without actually replacing it?
Click to expand...
Click to collapse
Hmm I think you can open your phone (DON'T DO IF YOU DON'T HAVE ANY EXPERIENCE WITH HARDWARE) and take the LCD screen and take it to nearest service shop to check whether it's working or not...and other possibility that your phone screen cannot be turn on is the screen power might got shot and burnt (like black out in a house,the power supply is shot )
XDA Premium sent this message from owner of Sk17i

puppet13th said:
+1 with this
Okay,let says the screen got problem.the screen just have blank display right?
Try to put a sim card that doesn't have security pin when turn on.
After turn on wait for a few minutes and the try to call it.if the phone rings.the display surely defective.
Sent from my ST17i using Tapatalk 2
Click to expand...
Click to collapse
That's actually a really good idea. Thanks!

UchihaDareNial said:
Hmm I think you can open your phone (DON'T DO IF YOU DON'T HAVE ANY EXPERIENCE WITH HARDWARE) and take the LCD screen and take it to nearest service shop to check whether it's working or not...and other possibility that your phone screen cannot be turn on is the screen power might got shot and burnt (like black out in a house,the power supply is shot )
XDA Premium sent this message from owner of Sk17i
Click to expand...
Click to collapse
I'll probably try to call it like the previous suggestion, then try this. I've been taking things apart for years, so that's no problem. Thank you

Related

[RAY] Display problems

Need help
Yes this is in the wrong fourm but its hardware so it may help
@Mod please do excuse me
I just got my friends ray and it has a display problem
The thing is ; The display lights up but nothing can be seen on screen :/
After shaking it a bit it SOMETIMES shows the display
No cracks or anything on the display:O
Any fix ?
Im guessing its hardware but ill just use wotan server for a try
EDIT; Used wotan server flash .238 didnt work >_<
EDIT: Sometimes when I remove the battery when the screen goes dark and put it in again
And it works fine :O
But then it starts again :/
So its hardware for SURE 100%
Any fixes ?
Has he damaged it some way (dropping it?)?
If possible, use warranty, else open it yourself and seek for loose wires.
There aren't any visible signs :O
What i was thinking is Deliberately brick the phone during Software update and say it isnt starting
Should work
No root
Locked BL
Qwerty123 \m/ said:
There aren't any visible signs :O
What i was thinking is Deliberately brick the phone during Software update and say it isnt starting
Should work
No root
Locked BL
Click to expand...
Click to collapse
Yeah, just pull out the cable while flashing. Should work.
Shall do that
Ill play real dumb
Thanks
What if there is some sort of circuit shorting? If the problem is physical...u can check the battery terminals for any fault...or may be it is due to moisture...now don't think of me as a fool...its just my thought...so try some kind of drier to demoisturize...hope it fixes the problem if my assertion is correct.
Weird advice...isn't it?
Sent from my MT11i using XDA
unisol107 said:
What if there is some sort of circuit shorting? If the problem is physical...u can check the battery terminals for any fault...or may be it is due to moisture...now don't think of me as a fool...its just my thought...so try some kind of drier to demoisturize...hope it fixes the problem if my assertion is correct.
Weird advice...isn't it?
Sent from my MT11i using XDA
Click to expand...
Click to collapse
I think most moisture problems are permanent. Everything is worth trying though.
Qwerty123 \m/ said:
What i was thinking is Deliberately brick the phone during Software update and say it isnt starting
Click to expand...
Click to collapse
So what happened? really like to know how service center guys responded
If you make a big scene they might give you a new one on the spot.
Sent from my MT15i using xda premium.
LaurieH95 said:
If you make a big scene they might give you a new one on the spot.
Sent from my MT15i using xda premium.
Click to expand...
Click to collapse
True well with Vodafone UK it works
Sent from my MT15i using Tapatalk
Im sending it in tomorrow
Im going to like get all angry xD
Shall re-post soon

Bricked my phone.....

Problem solved
Bricked galaxy s3?
Send From My Galaxy Gio and O2x
Al3xand3r# said:
Bricked galaxy s3?
Send From My Galaxy Gio and O2x
Click to expand...
Click to collapse
Yes....
Trev186 said:
Hi,
I was in the wrong ROM forum and installed a custom ROM for the international version of the S3 on my Sprint version of the S3.
I assume at this point it is hopeless (yes I know I am an idiot please dont flame me I just lost $600)
The phone will not even power on
If anyone has any advice I would love to hear it
Click to expand...
Click to collapse
Your phone is alright. Take a breath and go in Sprint and download an ROM when one is available. You just installed the wrong stuff but its an easy fix. Might take days some time for a rom to come online though
Just return it to sprint when they get some in stock and get a new one.
Woolios said:
Your phone is alright. Take a breath and go in Sprint and download an ROM when one is available. You just installed the wrong stuff but its an easy fix. Might take days some time for a rom to come online though
Click to expand...
Click to collapse
How do I download a ROM or do anything at all at this point if I cannot even turn the phone on?
Trev186 said:
How do I download a ROM or do anything at all at this point if I cannot even turn the phone on?
Click to expand...
Click to collapse
Can you get the phone into download mode?
To do this, pull the battery out (to make sure the phone is completely off), plug it in, hold the volume-down and home buttons then turn it on while holding those buttons.
If you can get it into download mode, then it should be possible to reflash the proper firmware using Odin.
Or at least, that's how things went when I had my Samsung Vibrant. I've only owned my S3 for a day.
Zanaffer said:
Can you get the phone into download mode?
To do this, pull the battery out (to make sure the phone is completely off), plug it in, hold the volume-down and home buttons then turn it on while holding those buttons.
If you can get it into download mode, then it should be possible to reflash the proper firmware using Odin.
Or at least, that's how things went when I had my Samsung Vibrant. I've only owned my S3 for a day.
Click to expand...
Click to collapse
No power whatsoever.
Cannot get to download mode...
I tried removingthe power and powering on to download mode and had no luck ....
Sent from my SPH-D710 using Tapatalk 2
Trev186 said:
Hi,
I was in the wrong ROM forum and installed a custom ROM for the international version of the S3 on my Sprint version of the S3.
I assume at this point it is hopeless (yes I know I am an idiot please dont flame me I just lost $600)
The phone will not even power on
If anyone has any advice I would love to hear it
Click to expand...
Click to collapse
Sorry, you're qhsusb_dload (aka hard) bricked. I've spent about 3 days trying to fix mine after I bricked it flashing a kernel on a bad port of cwm. If I had a working S3 and another 3 days I might be able to un-hardbrick it, but yeah, will just be exchanging it as soon as they come back in stock.
wildgamer100 said:
Just return it to sprint when they get some in stock and get a new one.
Click to expand...
Click to collapse
LOL, another Crook. Just because you would commit FRAUD I guess others should. That's exactly what it would be. You ruin your device hacking it, you are at fault. Not the carrier or manufacturer.
Sent from my iPhone using Tapatalk
davidstech11 said:
LOL, another Crook. Just because you would commit FRAUD I guess others should. That's exactly what it would be. You ruin your device hacking it, you are at fault. Not the carrier or manufacturer.
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
You know damn right that if you were in his position you would take it back and get a new one.
davidstech11 said:
LOL, another Crook. Just because you would commit FRAUD I guess others should. That's exactly what it would be. You ruin your device hacking it, you are at fault. Not the carrier or manufacturer.
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Exactly u would probably do the same I pay for insurance I expect them to insure my device
Sent from my SPH-M920 using xda app-developers app
Rev3ge07 said:
Exactly u would probably do the same I pay for insurance I expect them to insure my device
Sent from my SPH-M920 using xda app-developers app
Click to expand...
Click to collapse
Anyone know how I can buy a premade jig to try and frce boot odin ?
Sent from my SPH-D710 using Tapatalk 2
Trev186 said:
Anyone know how I can buy a premade jig to try and frce boot odin ?
Sent from my SPH-D710 using Tapatalk 2
Click to expand...
Click to collapse
EBay or amazon...
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Just take it to Sprint but don't tell em you was trying to download a custom rom.. Simple they probably don't know the issue yet until more people start taking they brick phones in because they tried to root..
I think you overpaid for your paperweight . Yes, I feel a little cruel for making a joke about someone who just lost $600, but you do still have a chance at exchanging it at Sprint. Bricking a phone is every custom rom users worst nightmare, but that's probably your best option. Good luck.
Same Probelm...Sort of
Yeah I did the same thing I think, tried to flash a kernel via cwm, said operation aborted...ok....so I reboot it and now it wont turn on, cant get it in download mode. Weird thing is though when i plug it in to my computer and hold down the power button, while nothing happens to my phone my computer will continuously make the connect disconnect sound like my phone is turning on for a nano second.
and if my phone is plugged in with battery out red charge light comes on, so I know something is going on in there.
any thoughts on how/if I can fix....
Yeah I may be a crook. But I would take the battery out and stick the headset in the microwave for about 3 seconds. You have insurance on it. Do what you got to do. They lie, cheat, and steal every chance they get.
Sent from my SGH-T999 using xda app-developers app
mbrow124 said:
Yeah I did the same thing I think, tried to flash a kernel via cwm, said operation aborted...ok....so I reboot it and now it wont turn on, cant get it in download mode. Weird thing is though when i plug it in to my computer and hold down the power button, while nothing happens to my phone my computer will continuously make the connect disconnect sound like my phone is turning on for a nano second.
and if my phone is plugged in with battery out red charge light comes on, so I know something is going on in there.
any thoughts on how/if I can fix....
Click to expand...
Click to collapse
Sorry, you're hard-bricked. As I mentioned in a previous post, your phone is in "qhsusb_dload" mode, which is a Qualcomm firmware flashing mode. If you look in your Device Manager, that's what you'll see your computer is detecting. There's absolutely nothing you can do at this point as no one outside Qualcomm/Samsung has the proper tools/files to recover from this state.
Trev186 said:
Anyone know how I can buy a premade jig to try and frce boot odin ?
Sent from my SPH-D710 using Tapatalk 2
Click to expand...
Click to collapse
I did the same thing, but I flashed the Omega rom and it hard bricked my phone 3 days ago.
I got a JIG in and it didnt work.
im taking it to Sprint tech support to try to get the data off it. FINGERS CROSSED

My SE Xperia X10 still vibrates, please help

Hello,
I have my SE since March and since May I have this problem. SE is still vibrating, I can do nothing with it. I tried root and reinstall system with flashtool but it didn't help. I've sent it to serivce too, but they said me that I need change motherboard. But I don't wanna do it, cause it is too expansive and it would be better buy new one.
Does anyone have some ideas or solutions how to repair it? I hope that is other way then changing motherboard.
Thank you all.
(And sorry for my English, I'm from CZ and still make some mistakes)
What do you mean?Of course it vibrates when needed.Can you explain your problem a bit?
AndroidReborn said:
What do you mean?Of course it vibrates when needed.Can you explain your problem a bit?
Click to expand...
Click to collapse
I mean it vibrates all the time. In interval of 1-2 seconds. When it is locked or turned off, it doesn't vibrate, but when I unlock it, it vibrates all the time.
Havent you left your X10 in some kind of fluid? Or didnt it survive huge rain?
BTW you can PM me, we can talk in czech
Hit helps, if helped
Repair with seus
sent from my x10 using xda premium
stephenhiscock98 said:
Repair with seus
sent from my x10 using xda premium
Click to expand...
Click to collapse
I tried, but it wrote that there is unofficial software.
Because I did root. So it doesn't work.
tdolejs said:
I tried, but it wrote that there is unofficial software.
Because I did root. So it doesn't work.
Click to expand...
Click to collapse
Just flash a generic 2.3 with flashtool
Sent from my X10S using xda premium

[Q] please help me hard bricked my XU

its not a charging problem or kernel or anything
when i was on jelly bean okay i restored my ta backup then i clicked reboot instead of power off then my phone gives no led no flashtool fastboot response nothing please help me
the phone does not vibrate when i power it on HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
help
help please please it doesnt connect to flashtool fastboot or even vibrates
guys for god sake help me!!!!!!!!!!!
If you do not have flashmode or fastboot mode you is not repair it. You need to flash stock rom before you flashing your.
BTW. after flashing TA is your BL locked go to the servise. Maybe they will fix it.
Srry for my english.
help me guys i need the phone so much
can i fix it without going to service center it is so far away
And Flashmode?
Get stock rom for xu and try to flash it via flashmode, maybe it will work.
Sorry as I am new to xda I cant post a new message for next 5 min. But remove the battery and charge it on a universal battery charger or a similar phone ant try to reboot. Sometimes the Kernel may fail to charge
Sent from my ST25i using xda app-developers app
i am not a noob
idragonx said:
And Flashmode?
Get stock rom for xu and try to flash it via flashmode, maybe it will work.
Click to expand...
Click to collapse
i said one trillion times my phone cant go for any mode no led no vibrating nothing
sorry for being upset i am just going to blow up i cant hold it lol
smartananallavan said:
Did u try to charge the phone?
Sent from my ST25i using xda app-developers app
Click to expand...
Click to collapse
yes for a 24 hours but since there is no thing is booting no kernel since i restored my ta and pressed the son of a b**** reboot button that rebooted my live
Leave the phone without battery for a while and press and hold the power button without battery for 60 sec then leave the phone again for a min or two then insert the battery and try to get into flash mode. If it isnt a hard brick then it'll definitely boot up make sure to keep the flashing stuff ready
Sent from my ST25i using xda app-developers app
smartananallavan said:
Leave the phone without battery for a while and press and hold the power button without battery for 60 sec then leave the phone again for a min or two then insert the battery and try to get into flash mode. If it isnt a hard brick then it'll definitely boot up make sure to keep the flashing stuff ready
Sent from my ST25i using xda app-developers app
Click to expand...
Click to collapse
no luck
Sorry to say this but I think it is actually hard brick.....
Try to Google it and search in xda too you might get some solutions.
Sent from my ST25i using xda app-developers app
smartananallavan said:
Sorry to say this but I think it is actually hard brick.....
Try to Google it and search in xda too you might get some solutions.
Sent from my ST25i using xda app-developers app
Click to expand...
Click to collapse
it is accually hard bricked i will send it to service center to maybe change the motherboard
i phoned them then i acted like a noob then they said come at Saturday
so how much the motherboard cost
i have a warranty but just in case
smartananallavan said:
Sorry to say this but I think it is actually hard brick.....
Try to Google it and search in xda too you might get some solutions.
Sent from my ST25i using xda app-developers app
Click to expand...
Click to collapse
thanx alot i appreciate that so so much you little gohan lol thanx for answering me my questions

[Q] Samsung logo appears on the screen and the phone locks up

Hi
Samsung galaxy s3 GT-i9300 did an auto update and a few hours later the phone shut down and would not restart. When you attempt to restart the Samsung logo appears on the screen and the phone locks up until you either hold down the power button which causes it to reboot and again lock up when the samsung logo appears or remove battery.
Have tried a hard reset by holding the vol home and power buttons but it won’t reset. The only thing it will do is go in to flash custom rom mode.
Has this happened to any of you guys?
Has anyone got any idea what I could do??
P.s the phone is a standard uk sim free phone and it has not been poked with.... no custom roms no root…
Thanks
Recovery then factory reset .
JJEgan said:
Recovery then factory reset .
Click to expand...
Click to collapse
hi thanks for replying
now when you say recovery is that with software or is there a sequence buttons to push for recovery...
Via Recovery Mode .
STICKYS basic faqs and guides .
http://forum.xda-developers.com/showthread.php?t=2344125
pspec1 said:
hi thanks for replying
now when you say recovery is that with software or is there a sequence buttons to push for recovery...
Click to expand...
Click to collapse
Turn ur fone off by pulling the batt. Then hold power+home+volume up button.
Sent from my SM-N9005.
Give a thank if I helped you
JJEgan said:
Via Recovery Mode .
STICKYS basic faqs and guides .
http://forum.xda-developers.com/showthread.php?t=2344125
Click to expand...
Click to collapse
Hi
i've been through the stickies a few times and if something was relevant to me i either missed it or I didn't understand it.
As i can't get into hard reset by pressing vol up plus home plus power am i right to say i also can't get into the recovery.
i was hoping when that chap mentioned recovery there was a different method of getting there.
the phone is able to only go in to one mode... pressing volume down plus home plus power gets into a os downloading mode.
I tried to use kies with this mode but it doesn't seem to see the phone when connected to usb (pc beeps when phone is plugged in it installs something drivers I think) I was hopping to use recovery firmware in kies..
Any ideas
Thanks
JellyYogurt said:
Turn ur fone off by pulling the batt. Then hold power+home+volume up button.
Sent from my SM-N9005.
Give a thank if I helped you
Click to expand...
Click to collapse
Hi
the phone is only able to go in to one mode... pressing volume down plus home plus power gets into a os downloading mode.
Vol up plus home plus power isn't working..
Any other ideas are more than welcome
Thanks
Follow the guide in stickies to flash the full stock rom using odin, in download mode. Uninstall kies first.
Or return to Samsung for warranty repair.
Sent from my GT-I9300 using Tapatalk
boomboomer said:
Follow the guide in stickies to flash the full stock rom using odin, in download mode. Uninstall kies first.
Or return to Samsung for warranty repair.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
Dun have to uninstall kies. U just make sure kies isnt running in the background.
Sent from my GT-I9300.
Give a thank if i helped you.
boomboomer said:
Follow the guide in stickies to flash the full stock rom using odin, in download mode. Uninstall kies first.
Or return to Samsung for warranty repair.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
hi
Phone is 18 months old so I thought the warranty had expired but apparently it’s 2 years so Samsung said to send it back ….
Thanks
pspec1 said:
hi
Phone is 18 months old so I thought the warranty had expired but apparently it’s 2 years so Samsung said to send it back ….
Thanks
Click to expand...
Click to collapse
Did u pay for more years of warranty? They did say to send it back. But did they say it is free?
Sent from my GT-I9300 using xda app-developers app
I think the phone comes with 24 month manufacturers warranty in Europe. I need to send mine in too (SDS) and waiting for the "jiffy bag". I have a small bump on the back cover, would that make em think its a drop defect? Can they take it in without the back cover, in the email they say phone and battery nothing else.
Klejdi90 said:
I think the phone comes with 24 month manufacturers warranty in Europe. I need to send mine in too (SDS) and waiting for the "jiffy bag". I have a small bump on the back cover, would that make em think its a drop defect? Can they take it in without the back cover, in the email they say phone and battery nothing else.
Click to expand...
Click to collapse
U have to send in the back cover too. They will not accept drop defect as it is user problem not theirs.
Sent from my GT-I9300 using xda app-developers app
JellyYogurt said:
U have to send in the back cover too. They will not accept drop defect as it is user problem not theirs.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
I mean the bump is on the cover only it is definitely a SDS issue it was working fine long after the bump which was light. I was wondering whether they will see the bump as a drop defect and say thats why the phone doesn't work?
Klejdi90 said:
I mean the bump is on the cover only it is definitely a SDS issue it was working fine long after the bump which was light. I was wondering whether they will see the bump as a drop defect and say thats why the phone doesn't work?
Click to expand...
Click to collapse
Can u take a pic of it? I think they wun see it as drop defect.
Sent from my GT-I9300 using xda app-developers app
Give a thank if I helped you
JellyYogurt said:
Can u take a pic of it? I think they wun see it as drop defect.
Sent from my GT-I9300 using xda app-developers app
Give a thank if I helped you
Click to expand...
Click to collapse
Odd for all they would know I changed my cover with a broken one, but yeah i can see em getting a hook on every little thing.
Edit: I forgot to mention I have a half SDS where I can get into download mode but the product name is blank and the status Custom. Strangely though I cannot always get into download mode It is quite random, sometimes it lets me most of the time it doesn't.
Klejdi90 said:
Odd for all they would know I changed my cover with a broken one, but yeah i can see em getting a hook on every little thing.
Edit: I forgot to mention I have a half SDS where I can get into download mode but the product name is blank and the status Custom. Strangely though I cannot always get into download mode It is quite random, sometimes it lets me most of the time it doesn't.
Click to expand...
Click to collapse
I think u are kinda safe. Good luck
Sent from my GT-I9300 using xda app-developers app
Give a thank if I helped you
JellyYogurt said:
I think u are kinda safe. Good luck
Sent from my GT-I9300 using xda app-developers app
Give a thank if I helped you
Click to expand...
Click to collapse
Thanks xD I'm gonna need it dealing with Samsung:fingers-crossed:
Klejdi90 said:
I think the phone comes with 24 month manufacturers warranty in Europe. I need to send mine in too (SDS) and waiting for the "jiffy bag". I have a small bump on the back cover, would that make em think its a drop defect? Can they take it in without the back cover, in the email they say phone and battery nothing else.
Click to expand...
Click to collapse
Hi
. When I phoned Samsung the bloke told me not to send in the back cover or the battery.
All they wanted was the phone.
And he made the point of telling me that 2 or 3 time
pspec1 said:
Hi
. When I phoned Samsung the bloke told me not to send in the back cover or the battery.
All they wanted was the phone.
And he made the point of telling me that 2 or 3 time
Click to expand...
Click to collapse
This is what they sent me "Please ensure that you only send the device itself with the battery, remove all SIM cards/microSD cards and back up any important files." Nothing about the cover but battery seems to be important. The phone cant turn on and I even told them that so I dunno how I'm supposed to back up important files.

Categories

Resources