Related
Hello,
I used QTL to fix a Streak and I believe it put it back to factory default. Now I would like to get it rooted, install Clockwork recovery and thenDJ Steve's ROM.
Is there a specific order to do this? I am trying to do clockwork first, but it is not working. The command runs and it sits at "waiting for device" forever. I am using Windows 7 64bit.
Thanks!
I'm fairly new to the process myself but I just followed DJ_Steves instructions on how to do it to the T. The 1.6 version I put on first actually came pre-rooted! Once you have it on it also has instructions on how to have streak recovery running too so any future updates (like 1.6.1) can be done in a matter of minutes! Also to note I did this on my laptop running Win7 64bit.
Thanks, but could you post a link to the article?
It's on this forum but I went to streakdroid.com I seemed to follow those directions better then I did on here. Its the same thing both from dj_steve.
Hey xda forums, first time poster, long time reader. I rooted my Nook color from these forums and find them to be most informative. I just got back from hiking the Grand Canyon to find my G Tablet waiting for me from Woot.
As I did with my Nook, I immediately started to replace the stock rom with Cyanogenmod 7 beta. I followed the instructions on the Wiki, including installing Gapps, by putting them on the internal SD and using CWM to install from zip. After everything was done however I am now stuck at the Viewsonic splash screen. I tried to read thru the Googles and tried reflashing back to stock by way of some instructions on DroidPirate I think it was, to no avail. I can't even see my external SD card to load the update to recover. Please help. Anyone?
I would get nvflash set up with bekit's images and flash that to get yourself back to a working stock image. Follow the instructions in this thread:
http://forum.xda-developers.com/showthread.php?t=861950
After that, put Clockworkmod ( v .8, get it from development forum) on it and repartition your sdcard to 2048 and 0 then you should be ready to flash.
Then get a ROM from the development forum here, there are some based off cm7 (gingerbread builds).
I was hoping not to have to use NVflash cuz people report problems with the boot loop, however I havent found any other option so far so I guess i'm trying that. Thanks for the link.
Xxlgeek,
Every time I hear boot loop I think re-partition -- because most of the time that
seems to fix the problem.
I agree you should NVFlash to get a stock version working. Then install CWM so
you can partition -- and the do the Fix Permissions, Wipe Dalvik Cache, Wipe
Cache, Wipe Factory Data.
With that I would try to wind up with a stock machine and let it OTA up to 3588.
I wouldn't load another Alternate Rom until I knew my tablet is working good and
until I know a lot more about the roms and how to work with the G-Tablet.
IMHO.
Rev
I can actually boot into CWM right now. I already repartitioned and wiped all the caches. But when I try to flash Cyanogenmod 7 again, which is on the root of the internal memory, it just does the same thing, won't load past splash screen.
Xxlgeek,
If it didn't work, I would erase the Cyanogenmod 7 file -- and I would go back to a stock rom until I could make sure all the hardware is working right and the system
is stable.
When you know the tablet is good and stable, you can always download and re-do.
Rev
Xxlgeek said:
Hey xda forums, first time poster, long time reader. I rooted my Nook color from these forums and find them to be most informative. I just got back from hiking the Grand Canyon to find my G Tablet waiting for me from Woot.
As I did with my Nook, I immediately started to replace the stock rom with Cyanogenmod 7 beta. I followed the instructions on the Wiki, including installing Gapps, by putting them on the internal SD and using CWM to install from zip. After everything was done however I am now stuck at the Viewsonic splash screen. I tried to read thru the Googles and tried reflashing back to stock by way of some instructions on DroidPirate I think it was, to no avail. I can't even see my external SD card to load the update to recover. Please help. Anyone?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1021978
you are not alone...
it may have to do with the boot loader .... further investigation needed. CW does not replace this but the stock does I have been running the old one since december on my personal tab. but most of these woot pads are updated .... hmmmmmm
Xxlgeek said:
I can actually boot into CWM right now. I already repartitioned and wiped all the caches. But when I try to flash Cyanogenmod 7 again, which is on the root of the internal memory, it just does the same thing, won't load past splash screen.
Click to expand...
Click to collapse
Which version of CM7 are you running?
jivy26 said:
Which version of CM7 are you running?
Click to expand...
Click to collapse
doesnt matter all the gbread roms do this when the error happens. thats why i am starting to think its the bootloader
Just throwing this out there. I bought 2 from Woot myself. On my first G-Tab I had the same issue with every single ROM I tried. I finally used NVFlash to go back to stock and everything was good again. I then flashed to the G-Harmony Gingerbread ROM and it worked and still runs like a CHAMP. Now, I finally get the other G-Tab out and start to go through the same routine as the first and it's been a no go repeatedly. I have mostly been trying with the Cyanogen 7 Final ROM to no avail and even with the G-Harmony. Going to try NVFlash on number 2 tab and see what the result is and will post back in a bit with updates.
Ok, I said I would reply and here it is. The downside is this.... The NVFlash worked great and put me back to stock. The bad part is that I am not sure that was what actually caused the problem to occur in the first place on the second tablet. I had read right before doing this that installing the Clockwork mod from the SD card instead can be a fix as well. I did that this time through. It also shows something different on the screen when you hold down the start and vol+ buttons than it was when CWM was installed wrong.
So basically this:
Run NV Flash (Detailed here: http://forum.xda-developers.com/showthread.php?t=861950 )
Run Clockwork Mod FROM THE SD CARD!!! (Detailed here: http://forum.xda-developers.com/showthread.php?t=865245 )
Then proceed to follow those exact instructions from the same thread.
Do not skip stuff, do not think you have a better path, just do it all as described. I now have a G-Tablet running the Cyanogen Mod 7 Final release SMOOTH as glass! Hope this helps someone else out.
tunez23 said:
Ok, I said I would reply and here it is. The downside is this.... The NVFlash worked great and put me back to stock. The bad part is that I am not sure that was what actually caused the problem to occur in the first place on the second tablet. I had read right before doing this that installing the Clockwork mod from the SD card instead can be a fix as well. I did that this time through. It also shows something different on the screen when you hold down the start and vol+ buttons than it was when CWM was installed wrong.
So basically this:
Run NV Flash (Detailed here: http://forum.xda-developers.com/showthread.php?t=861950 )
Run Clockwork Mod FROM THE SD CARD!!! (Detailed here: http://forum.xda-developers.com/showthread.php?t=865245 )
Then proceed to follow those exact instructions from the same thread.
Do not skip stuff, do not think you have a better path, just do it all as described. I now have a G-Tablet running the Cyanogen Mod 7 Final release SMOOTH as glass! Hope this helps someone else out.
Click to expand...
Click to collapse
I too am having the same problem but when I try to run NVFlash, I get the error "nvflash configuration file error: file not found Press enter to continue:"
The tablet doesn't restart or anything. I followed the steps to re-partition and install the ROM from "http://forum.xda-developers.com/showthread.php?t=865245." After that didn't work, I tried the steps from "http://forum.xda-developers.com/showthread.php?t=861950" and I get stuck at running the nvflash_gtablet.bat file.
Any help would be appreciated.
Did you extract both archives to the same directory on your computer?
akodoreign said:
doesnt matter all the gbread roms do this when the error happens. thats why i am starting to think its the bootloader
Click to expand...
Click to collapse
2 partitions are reversed and Gingerbread roms don't like it. Using bekits original nvflash files will fix the partitioning permanently as far as flashing between froyo and gingerbread.
Any official updates from viewsonic past 3588 have a locked bootloader and require viewsonics kernel so you must use Gojimis fix or nvflash to go back.
Edit.....This is not all tablets. I'm guessing around 30% or so have the 2 reversed partitions but it seems 50% of the woot tabs. Helped fix many of these on irc in the last 2 weeks
KrazyOne7 said:
I too am having the same problem but when I try to run NVFlash, I get the error "nvflash configuration file error: file not found Press enter to continue:"
The tablet doesn't restart or anything. I followed the steps to re-partition and install the ROM from "http://forum.xda-developers.com/showthread.php?t=865245." After that didn't work, I tried the steps from "http://forum.xda-developers.com/showthread.php?t=861950" and I get stuck at running the nvflash_gtablet.bat file.
Any help would be appreciated.
Click to expand...
Click to collapse
Having the same problem too!! Any help would be much appreciated.
Tried wiping everything with FORMAT.zip from another thread, and get and error for unknown device when running that *.bat file.
This newbie needs some serious help!
Locked bootloader??!
thebadfrog said:
Any official updates from viewsonic past 3588 have a locked bootloader and require viewsonics kernel so you must use Gojimis fix or nvflash to go back.
Click to expand...
Click to collapse
I think I must have the locked bootloader, but tried both Gojimis's fix and nvflash fix and get the error as mentioned above.
So I am getting nowhere, won't go past the "booting..." splash screen to install any of the update.zip files from the microSD card.
Help!
K J Rad said:
Did you extract both archives to the same directory on your computer?
Click to expand...
Click to collapse
Yes, I extracted both the gtablet and the windows zip files.
KrazyOne7 said:
Yes, I extracted both the gtablet and the windows zip files.
Click to expand...
Click to collapse
Me too, and still getting the error "nvflash configuration file error: file not found Press enter to continue:"
Are they in the same directory. If they are not then nvflash can not find the files to flash. Both zips have to be unzipped in the same directory and the driver has to work. You must be able to see the tablet from the computer when you boot into apx mode. APX mode is power/vol- NOT power/vol+
This is my first experience trying to mod a device but everything I read said it was easy so I bought the Gtab and spent 4 hours yesterday trying to flash VEGAn-TAB GingerEdition STABLE RC1 but it won't boot.
The first thing I did was root the device following instructions from driod pirate (before I found XDA). I now know I didn't need to do that step.
After rooting it, I found this post with great step by step instructions for installing clockworkmod and flashing a rom. I followed the instructions to install ClockwordMod and the VEGAn-TAB GingerEdition rom. After trying to boot, it stuck on the ViewSonic splash screen.
I did some more research and thought I might need to downgrade the bootloader/tnt version so I followed these instructions and was able to successfully load the stock rom. I then followed the same steps above to install clockworkmod and flash the vegan rom. Again, when trying to boot, it just sticks on the ViewSonic splash screen.
Any ideas what I might be doing wrong?
Do I need to do a nvflash and try the process from the beginning again?
dw21 said:
This is my first experience trying to mod a device but everything I read said it was easy so I bought the Gtab and spent 4 hours yesterday trying to flash VEGAn-TAB GingerEdition STABLE RC1 but it won't boot.
The first thing I did was root the device following instructions from driod pirate (before I found XDA). I now know I didn't need to do that step.
After rooting it, I found this post with great step by step instructions for installing clockworkmod and flashing a rom. I followed the instructions to install ClockwordMod and the VEGAn-TAB GingerEdition rom. After trying to boot, it stuck on the ViewSonic splash screen.
I did some more research and thought I might need to downgrade the bootloader/tnt version so I followed these instructions and was able to successfully load the stock rom. I then followed the same steps above to install clockworkmod and flash the vegan rom. Again, when trying to boot, it just sticks on the ViewSonic splash screen.
Any ideas what I might be doing wrong?
Do I need to do a nvflash and try the process from the beginning again?
Click to expand...
Click to collapse
You need to follow the nvflash instructions on the developer page. Your partitions need to be fixed before gb roms will work
I suggest the first thing you do is setup nvFlash. I can assure you that you will need to use this utility at some point. It is very usefull and powerfully utility and is very easy to setup and use. http://forum.xda-developers.com/showthread.php?t=861950
once you set that up..i suggest you start from scratch.
So this is what I would do if i was in your shoes.
1. Install nvFlash and go back to stock.
2. Update to 3588 using OTA
3. Install cwm .8 on your tablet
4. Repartition to 2mb/0 using cwm .8
5. Wipe data, clear cache, clear dalvik using cwm .8
6. Mount your tablet using cwm .8 and upload the rom you want to install
7. Install the rom you want and you should be good to go
(dont forget to reboot your device after that first boot.)
What is the risk involved with NVFlash? I've read a few complaints that their devices were bricked after nvflash. How do I make sure I avoid that happening?
dw21 said:
What is the risk involved with NVFlash? I've read a few complaints that their devices were bricked after nvflash. How do I make sure I avoid that happening?
Click to expand...
Click to collapse
Anytime you brick it, you can use nvFlash to un-brick it. Its just a matter of knowing what you are doing and reflashing it with the correct files. From what I have experienced, its pretty much impossible to brick these tablets once you have nvFlash setup. No matter how bad that situation is, I have always been able to recover using nvFlash(and I have been in very terrible situtations where I got a blank screen when i booted...turns out I was stuck in apx mode when i booted)
rbansal2 said:
4. Repartition to 2mb/0 using cwm .8
5. Wipe data, clear cache, clear dalvik using cwm .8
Click to expand...
Click to collapse
Can you go into more details on these two steps? I know it's done with cwm but I want to make sure I do it exactly right.
worked for me
Thanks guys this worked great! For some reason I couldn't upgrade to 3588 it would FC at 50% but it works now!
clayvikings said:
Thanks guys this worked great! For some reason I couldn't upgrade to 3588 it would FC at 50% but it works now!
Click to expand...
Click to collapse
Awesome, that's great news! Welcome to the club!
rbansal2 said:
I suggest the first thing you do is setup nvFlash. I can assure you that you will need to use this utility at some point. It is very usefull and powerfully utility and is very easy to setup and use. http://forum.xda-developers.com/showthread.php?t=861950
once you set that up..i suggest you start from scratch.
So this is what I would do if i was in your shoes.
1. Install nvFlash and go back to stock.
2. Update to 3588 using OTA
3. Install cwm .8 on your tablet
4. Repartition to 2mb/0 using cwm .8
5. Wipe data, clear cache, clear dalvik using cwm .8
6. Mount your tablet using cwm .8 and upload the rom you want to install
7. Install the rom you want and you should be good to go
(dont forget to reboot your device after that first boot.)
Click to expand...
Click to collapse
I did exactly this (minus step 1. as it was already a stock device) and I had exactly the same problem - gtab stuck at viewsonic splash screen. My unit was fresh outta the box and fully charged, and this was the firstht hing I tried to do with it. CWM installed without a hitch (yes, 0.8) and I repartitioned without fear (I had no data on it anyway). Did the wipes, mounted the tab and copied over the rom... all instructions I found on XDA for doing it. It still sticks at the splash screen.
So, to get a working tablet again, I used nvflash to go back to stock (though I have a superuser app now, which is odd for 'stock'), did the ota update to 3588, loaded Spark+ on it for a launcher and add the amazon marketplace app (looking for more free apps).
I still want to get VEGAn installed though, just wish I new why it was freezing up/not booting/not correctly installing or whatever the problem is.
If you have run nvflash you can now install Gingerbread roms as it fixed your partitioning. When you got stuck on the vs birds it meant your partitioning was wrong and you needed to nflash. If you did then your fine now.
The nvflash provided does not bring you to complete stock. If you want complete stock just flash the 3588 update.
I did the exact same thing you did, with the same result. Then I nvflashed and walked through the rest of the steps and I was quickly able to flash VEGAn-TAB.
dw21 said:
I did the exact same thing you did, with the same result. Then I nvflashed and walked through the rest of the steps and I was quickly able to flash VEGAn-TAB.
Click to expand...
Click to collapse
I've been watching the VEGAn-TAB logo flash and pulse at me for the past hour. Think I'm going to try to flash the ROM again...
EDIT:
Scratch that. restarted into cwm, cleared user data again, booted right into V. Going through setup screens now. Question though... If this was writtne for the G-Tab, then why does it still have the phone stuff in it?
was working but now it isn't?
++++i had to use nvflash for my gtab and it worked. I loaded vegan-tab 7.0 GE and it took "literally HOURS" to boot to the tablet setup page, after that it was working great until I rebooted it after 1 day of use and now i can't get past the "powered by g-tabdevs" boot page?????? any thoughts?++++
UPDATE: I repartitioned the sd card 2048/0 and that didn't work, then i cleared the dalvik (?) cache and the other cache and it booted up successfully (warning to newbs like me, this did clear all my data so back up everything)
SIDE NOTE: I love this website!!!
Two things I always do before I decide to try a new ROM, backup anything I don't want to lose, then go do a factory reset. When you install a new ROM, it doesn't automatically wipes all the partitions, especially the user data and settings. By leaving that there, you are allowing the ROM have access to that information which in turn, can cause problems because not every ROM setups the same. I have seen many people run into problems because they don't do a data wipe. If you do this, you will see a lot less problems in the future and if you do get a new install running but seeing FCs with a lot of apps, do a factory reset.
VEGAn-TAB GingerEdition STABLE RC1 Still In Boot Loop
Hi, I've tried doing as per what the instructions said about clearing the cashes and partition SD card sizing. I've load VEGAn-Tab 6 times already and everytime I still end up with a boot loop error. I just decided to use tntlite instead, but I really want to get this working. I noticed one thing as I was loading tntlite and the stock rom that when I go back to ClockworkMod v08 to mount “/system” and “/data”.
I see the following:
“unmount/system”
and,
“unmount/data”
which is right, but when after I load VEGAn-Tab
I see the following:
“mount/system”
and,
“unmount/data”
From what I've been reading this should not be the case. I'm not sure it this is related to my problem with the boot loop or not.
Please help!
I was running Vegan 5.1 fine and decided to check out the new Vegan GE RC-1 so I went into CWM .8 and cleared the cache, dvork(spelling) and did a wipe and factory restore. Then I put the vegan file and renamed it update on my tablets sd card.
After all the cleaning I rebooted and tried to install. It did install from the sd card but when I booted for the firt time it would not get past the Viewsonic boot screen. I waited 5 minutes, then 15 minutes then almost a half hour and nothing?? I then formatted the sd card and system data and tried the process again and still stuck on the boot screen.
I do not know what I am doing wrong the sd card is partitioned 2gb-and 0 just like I have read. There is no data on the device except for the update file.
I read about nvflash but I do not understand the istructions. I have windows 7 laptop and the directions I am just lost with. Can someone please help me figure out what to do next??
If I need to run nv flash is there a set of instructions for windows 7 that are step by step. I really want to put Vegan GE but this is getting a little out of my comfort and knowledge(not that I have much knowledge). I am willing to learn and tried the flash but got lost in the steps.
Please help!!
Thanks in advance.
Rob
check out pesacolacomps on youtube
On Youtube, pensacolacomps has a step by step video that might help. Just do a search. I'll try to find the direct link and post it in a little.
link to pensacolacomps nvflash instruction video
Appearently I'm too new a user to be allowed to post outside links. The last part of the URL is
/watch?v=qK2tgEBQRIU
Hope it helps.
Thanks!!
Thanks so much I got the youtube link and sent it to my home e-mail since I am on thin client at work with no speakers!!
I think that will solve my problems!! Thanks again!!
Robert
I am in same situation. i installed the latest Gingerbread yesterday and my tablet is stuck on same boot up screen with 3 birds.
did you have any luck with it?
i gave up and installed stock rom. looks like Tap and Tap guys became smart and blocked the boot loader may be.
Let me know if you got it working on your gtablet?
Thanks
Rg
Nvflash is what you need. Search for the current 30+ threads with the same info
i installed cm7 on my touchpad last week and everything went fine. so i tried to install it on my friends 32 gb touchpad and i get stuck in a bootloop. moboot seemed to install fine becuase i have the boot menu working, cwm works, but when i try to load cm7 i get the green pic that says cyanogenmod loading but after that it goes back to the hp logo and starts over. i can boot into webos just fine but cm7 gives me the run around. ive tried doing a factory reset, wiping the cache and dalvik cache from cwm but nothing. i even tried making a nandroid backup from my 32 gb touchpad and tried to copy that to my friends touchpad but i got an error in the restoring process. ive also tried reinstalling the zip through cwm and through the acmeinstaller. do i have to doctor it and try again? has anyone run into this problem?
thanks
I have the exact same problem on my touchpad. I've tried every single option I can think of (I've reset everything, re-installed WebOS 5 times, cleared all caches, attempted to install from zip, etc.), at one point I did have it boot into Android once, but when I came back the next morning it had rebooted and was sitting at the CM7 screen frozen and wouldn't boot back into CM7. I'm thinking it has something to do with corrupt memory on a certain sector of the flash, so I've been looking for a way to format the entire partition and then try a WebOS doctor, but there doesn't seem to be any information on it. So... I'd say we're stuck for now.
I installed alpha 1 and it was working well with the usual hiccups. Then I backed up alpha 1 and flashed alpha 2.1 and it installed.
The update was working great and then I decided to check the reboot to Web OS to check how things work. Web OS worked great then I booted to cm7 and got the dreaded boot loop.
Tried reflashing over and over but same result. Luckily I had backed up first alpha so I restored it and it did boot loop again, but only once this time,before booting into rom.
So I believe the issue has something to do with alpha 2.1.
Sent from my HP Touchpad using xda premium
Could be, my one successful boot in Android was in Alpha 1. I may be experiencing a somewhat different issue as mine only boot loops sometimes, others it just sits with the CM7 circle spinning until I force it to restart. I'll see if I can get Alpha 1 to work again.
Doin some Googling I found a thread on Google code with people that have the same problem, no fix as of last night when I checked but I subscribed to the thread to Ger notified when it is updated. Don't know if xda will allow a link to the thread so if you want the link pm me and ill send it to you
Sent from my PC36100 using xda premium