CPU Clock - Motorola Droid X2

Hey guys, I know we can underclock our CPU but has anyone found a good app to either increase the min frequency and have it actually stick? The only one I've found was System tuner by 3c but it only sticks for a bit and then either hangs or just plain doesn't work. I've found that keeping the min values at about 608mhz will stop just about all music skips for me. And yes I know this will kill my battery.
Sent from my MB870 using XDA

Sometimes I get lucky with ROM Toolbox's CPU settings. Set your minimum and reboot.
Sent from my Galaxy Nexus using Tapatalk 2

thelowend said:
Sometimes I get lucky with ROM Toolbox's CPU settings. Set your minimum and reboot.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
Oh wow. I forgot to reboot! No frills CPU is working now. Thanks for kickstarting this thing I call a brain.
Sent from my MB870 using XDA

Ok I'm getting annoyed now, no frills CPU works BUT it kills itself minutes after I leave the app. Ill set the CPU to...lets say 1ghz min and Max it will show in system panel that indeed it is staying clocked at 1ghz and not fluctuating. Then ill go do something else on my phone, for example, browse the xda forums, I come back to system panel and its fluctuating again!!! Ive tried rebooting after setting the CPU min/Max but it will still do the same thing. Ive noticed that after i exit no frills it either goes into cached processes or it just stops and acts like i killed it, any ideas?
Edit: I wanna say its a superuser hang issue, I've tried supersu but it seems to hang as well but I'm open to peoples opinions.
Sent from my MB870 using XDA

Are you on cm7 or Eclipse?
Sent from my Galaxy Nexus using Tapatalk 2

Weird... I use Rom Toolbox Pro > Performance > SD Boost and it works every time for me! Running CM7 with superuser....supersu hangs like a mofo for me on cm7
Sent from my MB870 using XDA

thelowend said:
Are you on cm7 or Eclipse?
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
CM7
Sent from my MB870 using XDA

Triscuit said:
CM7
Sent from my MB870 using XDA
Click to expand...
Click to collapse
OK. Lemme find my X2 and look around
Found it. Nandroiding to cm7.
Rom toolbox isn't working for me...3 FCs
Sent from my Galaxy Nexus using Tapatalk 2

Just testing to see if the settings would stick after setting them,then rebooting.
Sliders did but the CPU obviously didn't.
Sent from my MB870 using Tapatalk 2

thelowend said:
Just testing to see if the settings would stick after setting them,then rebooting.
Sliders did but the CPU obviously didn't.
Sent from my MB870 using Tapatalk 2
Click to expand...
Click to collapse
Yep same thing I'm getting, I'm wondering if there is an init.d script that could be made that would lock it at certain frequencies. That.....is out of my knowledge
Sent from my MB870 using XDA

sorry guys
this isn't possible
no matter how you try to set the min/max with ANY unit.d script or app, it just
will not stick.
at first it well seem like it's working for a few minutes. but then something happens and the kernel basically says "no that ain't gonna happen anymore" and kicks the min/max back to where it should be (the sliders in the apps won't move, but the actual system min/max and governor will be what it is supposed to be)
trust me, I've tried this from just about any angle fire the longest time.
sorry to be the bearer of bad news
Sent from my Galaxy Nexus using Tapatalk 2

Related

Problem with setCPU

I'm running fauxs kernel but I scaled it back to 1 ghz. However, when I select Time ib each state I notice that it's still going past that frequency, what am I doing wrong?
Sent from my MB860 using XDA App
i am having same issue, i think set cpu only kicks in after the boot.
I rebooted and I still have the problem.
Sent from my MB860 using XDA App
Anyone?
Sent from my MB860 using XDA App
?
10 char
do you have set on boot selected?
yeah 10char
IUH1991 said:
I rebooted and I still have the problem.
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
I meant to say setcpu only works after boot like cpu will be 1100 while booting after OS is loaded up setcpu gets super user permission and then scale cpu down.
If kernal has set clock to 1000 by defualt and only then it boots at 1000 and u can use setcpu to over clock it.
i guess old faux's 1.6 kernel was default 1000 new 1.7 is not.

Set CPU constantly granted super user permission?

I run the original cm7 rom with the infected kernel. I use set CPU to under clock/over clock to try to save battery but it constantly gets granted super user permission, and it will not sleep automatically. Any body know a way to fix this? Btw when I get rid of set CPU completely the battery life is worse...
Sent from my PG86100 using XDA App
Go into superuser options and turn off notifications. Problem solved!
Sent from my PG8610000 using xda premium
You should not be using SetCPU with the "Infected" AnthraX kernels though. It doesnt work well. Try System Tuner or SysTune
EniGmA1987 said:
You should not be using SetCPU with the "Infected" AnthraX kernels though. It doesnt work well. Try System Tuner or SysTune
Click to expand...
Click to collapse
+1 SetCPU doesn't play well with Anthrax kernels.
Thanks guys
Sent from my PG86100 using XDA App

Undervolting applications?

About to flash Sebastian's 1.4. I was just wondering what applications people are fond of for undervolting and over clocking.
Any input would be greatly appreciated.
Thanks!
Sent from my ADR6425LVW using xda premium
System Tuner Pro.
CPU Master Pro.
SetCPU.
Sent from my ADR6425LVW using xda premium
+1 for set CPU
graybeard5 said:
+1 for set CPU
Click to expand...
Click to collapse
SetCpu doesn't seem to have the undervolt option. Unless i just can't find it. Under what tab is it?
Sent from my ADR6425LVW using Tapatalk 2
set cpu way better than everyrhinh else
sent from my lovely phone....hmmm wait its a tablet...waaa i dont really know.....im PARANOID NoW!
abby_nitewolf said:
SetCpu doesn't seem to have the undervolt option. Unless i just can't find it. Under what tab is it?
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
Under the voltage tab.. afaik voltage tabs only appear on the these overclocking tabs only if your kernel supports undervolting...stock kernels dont support it..
Sent from my GT-I9300 using Tapatalk 2
System Tuner
trickster2369 said:
System Tuner Pro.
CPU Master Pro.
SetCPU.
Sent from my ADR6425LVW using xda premium
Click to expand...
Click to collapse
Or you could use System Tuner
SetCPU is the general go-to app for its straightforward appearance. The voltage tab sometimes does not appear even for a custom kernel with voltage tables; compatibility issues the app maker needs to correct.
Try System Tuner for an interface with a lot of other useful options and info with graphics.
Incredicontrol offers an interface similar in layout to SetCPU, and can toggle the Force Fast/AC Charge option for kernels with that have it. However, its voltage tables have had gray text on a white background for some users lately, making it a minor nuisance to read. Got the problem on my setup.
PhantasmRezound said:
SetCPU is the general go-to app for its straightforward appearance. The voltage tab sometimes does not appear even for a custom kernel with voltage tables; compatibility issues the app maker needs to correct.
Try System Tuner for an interface with a lot of other useful options and info with graphics.
Incredicontrol offers an interface similar in layout to SetCPU, and can toggle the Force Fast/AC Charge option for kernels with that have it. However, its voltage tables have had gray text on a white background for some users lately, making it a minor nuisance to read. Got the problem on my setup.
Click to expand...
Click to collapse
Just downloaded System Tuner, and the interface is amazing! So many available options!
Just wondering, what settings is everyone running for undervolting. I never had a phone which i can undervolt in so this is all new to me.
Sent from my ADR6425LVW using Tapatalk 2
abby_nitewolf said:
Just downloaded System Tuner, and the interface is amazing! So many available options!
Just wondering, what settings is everyone running for undervolting. I never had a phone which i can undervolt in so this is all new to me.
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
Personally do -75mV across the board typically, pushing -82.5mV testing. -50mV should be reasonable for less accomadating cores.
All depends on your own CPU quality. Don't set tables on boot or by script unless they prove stable first. Or, just redo again each boot manually to be safest.
PhantasmRezound said:
Personally do -75mV across the board typically, pushing -82.5mV testing. -50mV should be reasonable for less accomadating cores.
All depends on your own CPU quality. Don't set tables on boot or by script unless they prove stable first. Or, just redo again each boot manually to be safest.
Click to expand...
Click to collapse
I'm running - 75. Thank you
Sent from my ADR6425LVW using Tapatalk 2
I've tried SetCPU Pro, System Tuner Pro, CPU Master, ROM Toolbox, and Voltage Control with both Funky kernel and dsb's kernel. None of the programs give me any voltage settings. So am I missing something?
xdadevnube said:
I've tried SetCPU Pro, System Tuner Pro, CPU Master, ROM Toolbox, and Voltage Control with both Funky kernel and dsb's kernel. None of the programs give me any voltage settings. So am I missing something?
Click to expand...
Click to collapse
Funky kernel doesn't have adjustable voltage settings. It has a fixed -50mV undervolt. Not sure on dsb's kernel.
So for Global Sense 3.6 ROMs, what kernels will work for UV?
Shrike, good to see ya from the Charge forum. It is exciting to own a device with lots of development.
Sent from my ADR6425LVW using Tapatalk 2
xdadevnube said:
So for Global Sense 3.6 ROMs, what kernels will work for UV?
Shrike, good to see ya from the Charge forum. It is exciting to own a device with lots of development.
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
I'm pretty sure dsb's works, but I haven't run Sense in a month, so I couldn't tell you what apps work with it. Try IncrediContol if you haven't already.
Also, good to see you here too. I'm still trying to help them out in the Charge forum when I can, but it's getting quieter and quieter over there.

Need kernel help with Infection 2.9.1

I'm on Infection 2.9.1 and I also flashed the latest Hiro kernel. I downloaded Trickster MOD to change settings. I'm getting a lot of reboots but I'm also trying to save as much battery as possible. I have no idea what settings to mess with and what to change them too. My phone settings had a Performance settings where you can change CPU settings and I also have Trickster like I said, just don't know which to use. I think both are on which might be causing problems? I posted some screenshots, could some please help me get something going? - Thanks guys!
http://img.tapatalk.com/d/13/07/24/u2a2a9u5.jpg
http://img.tapatalk.com/d/13/07/24/puzenesu.jpg
http://img.tapatalk.com/d/13/07/24/yhehynug.jpg
Oh, and "set on boot" means its turned on, correct?
If your using a kernel app like trickster mod than make sure everything that says set on boot under system\performance is unchecked
Sent from my ADR6425LVW using xda app-developers app
bunchies said:
If your using a kernel app like trickster mod than make sure everything that says set on boot under system\performance is unchecked
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
OK I got that part but what settings should I use? I'm not good with kernels and these apps, changing voltages, etc. My phone has been overheating and boot looping a lot. I also want to get best battery life possible. I just don't know what settings to use. Also if I'm using trickster to tweak my CPU shouldn't the performance in my phone settings be shut off? I'm open to using another tuner app.
Sent from my Infected Rezound using Tapatalk 2
Make the sleep frequency be 384 (whatever the 300 MHz is) been running that way since launch of 2.9.1, no issues, besides the native tether (only buggy issue I use) and whatever else others reported, I assume. Never used the features that this report so I don't know.
Sent from my Infected Rezound using xda app-developers app
Uzephi said:
Make the sleep frequency be 384 (whatever the 300 MHz is) been running that way since launch of 2.9.1, no issues, besides the native tether (only buggy issue I use) and whatever else others reported, I assume. Never used the features that this report so I don't know.
Sent from my Infected Rezound using xda app-developers app
Click to expand...
Click to collapse
I don't see a sleep setting? Here is what I see.
Sent from my Infected Rezound using Tapatalk 2
There is an option in kernel tuner for it. Some kernels do not support changing that setting though.
Now that he released it, this is what I used on infection the past week when 2.9.1 came out. It works amazingly. On install it gives you options for sleep 2 wake and screen off frequency (I set mine to on and 384 with no adverse issues)
http://forum.xda-developers.com/showthread.php?p=43942950
Sent from my Infected Rezound using xda app-developers app
Uzephi said:
There is an option in kernel tuner for it. Some kernels do not support changing that setting though.
Now that he released it, this is what I used on infection the past week when 2.9.1 came out. It works amazingly. On install it gives you options for sleep 2 wake and screen off frequency (I set mine to on and 384 with no adverse issues)
http://forum.xda-developers.com/showthread.php?p=43942950
Sent from my Infected Rezound using xda app-developers app
Click to expand...
Click to collapse
No clue what your talking about? What does that jb port do? Also are you saying I need to get rid of trickster mod and DL kernel tuner?
Edit: I downloaded kernel tuner app just even more confusing now. It has cpu0 and cpu1 and about 100 other options.
Sent from my Infected Rezound using Tapatalk 2
xXezmacXx said:
No clue what your talking about? What does that jb port do? Also are you saying I need to get rid of trickster mod and DL kernel tuner?
Sent from my Infected Rezound using Tapatalk 2
Click to expand...
Click to collapse
That kernel has special options in recovery when you flash it
Sent from my Infected Rezound using xda app-developers app
Uzephi said:
That kernel has special options in recovery when you flash it
Sent from my Infected Rezound using xda app-developers app
Click to expand...
Click to collapse
So this kernel will replace Hiro which I'm using now?
And you keep saying to change sleep freq to 384? I'm guessing that will fix my wake issues. What about fixing my battery life and boot loops?
Sent from my Infected Rezound using Tapatalk 2
Can anyone else chime in? This is what I'm trying to accomplish.
1. Fix boot loops
2. Stop the over heating
3. Make battery last as long as possible
4. Fix the wake up issues. When I press power button to wake phone the capacitive buttons turn on but the screen doesn't.
These are the issues that I'm trying to fix. Like I said I'm currently on infection 2.9.1 using lastest hiro kernel. I need some helping finding the right kernel to use and what settings to use with kernel tuner or trickster mod app doesn't matter.
Sent from my Infected Rezound using Tapatalk 2
That kernel will replace hiro. You can set screen off freq upon flashing in recovery. The below pictures is my current settings for the past week and only had one freeze (it was testing something out for the kernel before released). In the picture, screen off and idle freq are disabled as you change settings when flashing the kernel. (During install, aroma will ask if you want to do default or custom install, custom for more options.) Pictures are in thumb format so less space is used in the forum. You can click link for bigger image
Sent from my Infected Rezound using xda app-developers app
Uzephi said:
That kernel will replace hiro. You can set screen off freq upon flashing in recovery. The below pictures is my current settings for the past week and only had one freeze (it was testing something out for the kernel before released). In the picture, screen off and idle freq are disabled as you change settings when flashing the kernel. (During install, aroma will ask if you want to do default or custom install, custom for more options.) Pictures are in thumb format so less space is used in the forum. You can click link for bigger image
Sent from my Infected Rezound using xda app-developers app
Click to expand...
Click to collapse
OK thanks for the detailed instructions I'll try it and see if my phone improves.
Sent from my Infected Rezound using Tapatalk 2
You can change second core to something else. Lionheart is a performance based governor. I use it on second core with mpdecision having a longer wait to turn on core 1 for my personal optimal battery saving/performance. Core 0 is set for power save bias so only when I need speed, core 1 will kick on with some higher MHz while CPU 0 catches up a little later.
Battery savings isn't too great, but unless you are doing some CPU intensive stuff, it does pretty well on battery.
This is CPU times today... Mind you, I used my phone for a total of 4hrs from 530-1640. The reason it stayed at 192 a lot was because I just did texting, web browsing and some other low CPU intensive tasks so far today (about 20-30mins of awake time in 192 was screen off streaming a local radio station.) Ran buttery smooth though.
Sent from my Infected Rezound using xda app-developers app

Setcpu ?

I undervolted my phone with Setcpu with max freq of 1150 MHz, however in CPY spy i still find freqs over that r being used.....is there something wrong?
Sent from my HTC One X+ using xda app-developers app
ROMFlasherAce said:
I undervolted my phone with Setcpu with max freq of 1150 MHz, however in CPY spy i still find freqs over that r being used.....is there something wrong?
Sent from my HTC One X+ using xda app-developers app
Click to expand...
Click to collapse
You most likely have a performance option that came with the Custom Rom or are running an app that has System App access , which will over ride a User App. Double check all apps and settings to see if you have any other programs that have system user rights to your CPU, that is most likely what is over taking your desired settings.
Kyles1329 said:
You most likely have a performance option that came with the Custom Rom or are running an app that has System App access , which will over ride a User App. Double check all apps and settings to see if you have any other programs that have system user rights to your CPU, that is most likely what is over taking your desired settings.
Click to expand...
Click to collapse
Thanks for the quick reply, I'm on the Android Revolution HD 8.0 ROM now, that is probably the reason for this. Can I do something with this?
Sent from my HTC One X+ using xda app-developers app
Open up the app your using to undervolt, these should be an option to restore default values. Once back on default go ahead and open the programs' App info and disable or freeze it. Reboot and run your CPU spy app and see what is taking charge of your voltage. Also possible your voltages are not sticking which has to do with the ROM. Id suggest running profiles for CPU rather then undervolt. I. E. 534 mhz - 1434 mhz when screen on, 348-1012 when screen off. SetCPU is what i use. You have less of a chance of frying the motherboard and doing irreversible damage to your phone internally
Sent from my XT907 using Tapatalk 2
Undervolt has to do with lowering the power that goes to the battery. when desired mhz occurs, where as underclocking has to do with specifically CPU processors and with a specified setting (screen off, music app on) occurring. Just to clear up my previous post. Undervolting the battery use to do wonders on phones a few years back because of all around poor battery life on most devices. But nowadays it is pretty pointless.
Sent from my XT907 using Tapatalk 2
Setcpu is NOT compatible with tegra quadcore
Sent from my One X+ using Tapatalk 4
Lloir said:
Setcpu is NOT compatible with tegra quadcore
Sent from my One X+ using Tapatalk 4
Click to expand...
Click to collapse
What Lloir said. ^^^
Sent from my HTC One X+ using Tapatalk 2
The only app that seems to work properly with Sense stock kernel is Tegra Overclock.
Sent from my HTC One X+ using xda app-developers app

Categories

Resources