Hi, I have problem with my galaxy s2. Today I played Nova 3 on my phone and he suddenly turn of. I tried turn on nut he don't won't . I can turn on it only when he is connected to the charger. Without charger he turn of. What could have happened?
Sorry for my bad english
dawidk750i said:
Hi, I have problem with my galaxy s2. Today I played Nova 3 on my phone and he suddenly turn of. I tried turn on nut he don't won't . I can turn on it only when he is connected to the charger. Without charger he turn of. What could have happened?
Sorry for my bad english
Click to expand...
Click to collapse
No idea.
Try to charge the battery to 100% (when phone is turned off).
Then wait for another 15 minutes.
Then unplug the phone and pull out the battery.
Wait for about 3 minutes.
Then put the battery into the phone again.
Press Volume UP + Home + Power buttons until you see the recovery menu.
Then select wipe cache and reboot the phone.
Hope this will help !
I tryed it but doesn't work
dawidk750i said:
I tryed it but doesn't work
Click to expand...
Click to collapse
can u enter in download mode or recovery???
Yes I can
dawidk750i said:
Yes I can
Click to expand...
Click to collapse
then dont worry just flash the rom again it will boot
i flashed with odin 2.3.4, 2.3.5, 2.3.6 and 4.0.3 and still the same problem. Charger I have from i9000, that could damage the battery?
dawidk750i said:
i flashed with odin 2.3.4, 2.3.5, 2.3.6 and 4.0.3 and still the same problem. Charger I have from i9000, that could damage the battery?
Click to expand...
Click to collapse
no may be its hardware fault
is your device is not turning on or just bootlooping
i can turn on only when charger is plugged in device. When he turns on, I can disconnect the charger and he is working but when I turn on the game or browser he turn of
Related
Good.
My galaxy s2 failed to turn on.
Yesterday I installed the rom-BAR7 CriskeloRomV22-S-Tog-BLN-CallRec-Overscroll-3LS-CamHack-PWR-M-Esxt-(XXKI3-2.3.5), and the kernel SiyahKernel v1.7.8
and it works good
He was charging all night, the morning did the Battery Calibration, and was working perfectly
By late afternoon, I'll take it, and it dont turn on, nor in download mode or recovery mode or normally.
If you connect the charger a bit, note that it heats up, but no links or picture or anything
If connected to the computer appears to be installed this drive, but without success as you can see the image HERE
What solutions are there, without being sent to the warranty?
thanks
Pull the battery, wait a minute, reinsert the batterry and see if you get in recovery or downloadmode.
You could try a USB Jig.
gee2012 said:
Pull the battery, wait a minute, reinsert the batterry and see if you get in recovery or downloadmode.
Click to expand...
Click to collapse
nothing happens
tiagoorg said:
nothing happens
Click to expand...
Click to collapse
Just a thought
Maybe you had huge battery drain because of the rom or an application and it can not charged because of the temperature.Happened to me once with cm7(most probably my drain was from webroot security or setcpu)
.Remove the battery for longer time eg 15minutes and try to charge it
Ps if you have zero battery you can not enter recovery or download mode.I lived that and its really annoying
Sent from my GT-I9100 using Tapatalk
tiagoorg said:
nothing happens
Click to expand...
Click to collapse
Can`t you get in recovery (volume up - power - menu at the same time pressed) or download mode (volume down - power - menu at the same time pressed)
gee2012 said:
Can`t you get in recovery (volume up - power - menu at the same time pressed) or download mode (volume down - power - menu at the same time pressed)
Click to expand...
Click to collapse
Mentioned that he can not enter recovery or download
Sent from my GT-I9100 using Tapatalk
gee2012 said:
Can`t you get in recovery (volume up - power - menu at the same time pressed) or download mode (volume down - power - menu at the same time pressed)
Click to expand...
Click to collapse
no, i´ve tried this many times.... nothing happens
afilopou said:
Just a thought
Maybe you had huge battery drain because of the rom or an application and it can not charged because of the temperature.Happened to me once with cm7(most probably my drain was from webroot security or setcpu)
.Remove the battery for longer time eg 15minutes and try to charge it
Ps if you have zero battery you can not enter recovery or download mode.I lived that and its really annoying
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
the last time I saw,15minutes +- before turning off, had 65% battery...
tiagoorg said:
the last time I saw,15minutes +- before turning off, had 65% battery...
Click to expand...
Click to collapse
I mean remove the battery for 15minutes and then put it back and try to charge your phone
Sent from my GT-I9100 using Tapatalk
afilopou said:
I mean remove the battery for 15minutes and then put it back and try to charge your phone
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
i remove batery for 10 hours and nothing happens... help me please
any more options please ?
tiagoorg said:
any more options please ?
Click to expand...
Click to collapse
Yes as you have been informed already .
One try the USB recovery jig to turn download mode on that fails or you dont want to try a service centre for a non warranty repair .
jje
Just another guess:
Charge the battery for some minutes.
After unplugging the phone, pull out the battery, external SD-card and SIM-card for some minutes.
Try to start that phone with battery only.
Good luck ...
Send from my SGS2 (GT-I9100) running XXKI3 with CF-Root 4.2
if you know someone who has the same phone why not try using their battery?
or leave the phone to charge overnight and see what happens in the morning...
It_ler said:
Just another guess:
Charge the battery for some minutes.
After unplugging the phone, pull out the battery, external SD-card and SIM-card for some minutes.
Try to start that phone with battery only.
Good luck ...
Send from my SGS2 (GT-I9100) running XXKI3 with CF-Root 4.2
Click to expand...
Click to collapse
nothing
tiagoorg said:
nothing
Click to expand...
Click to collapse
Maybe f****ed bootloader
Sent from my GT-I9100 using Tapatalk
afilopou said:
Maybe f****ed bootloader
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
how i replace bootloader?
i9100 dead boot repair
Dead boot repair, J-tag will help
Micro Tech Toronto
Support i9100
hi tiagoorg i m still exact same situation as you. you can see my update in my thread
http://forum.xda-developers.com/showthread.php?p=18139062
listen how far i come to know that it is mostly happend by moisterizer or humidity.
mostly people take his fone in their pocket and when sweat release from body body's tempreture again conveert it into vaupour and this vapour some how enter in to mobile in your pocket. so go to samsung care or any good mobile repair shop who know his job better and say your exact situation and also say which i mention here ok. may be they can help you to dry the battery coonect point ok. becos some time when you pull off your battery and press the power switch button for 1 minute and then put back battery on mobile but dont push power button only insert the battery, u will find that near camera some heat is rising up and after some time it would be good heat enough near your camera. if i m rite then plz reply me ok.u know i did every thing like bootloader update, jtag but no success. if u have external charger charge ur s2 bateery with it and then clear ur battery touch point in both means on fone and basttery too with blade or paper knife and then insert ur battery if u will lucky u will see that ur fone will start but when will u switch off ur fone again ur fone will refuse to start. i m damn sure about it. reply if it happens to u ok
Hi guys,
three days ago I installed Darkyrom HD on my mates Galaxy S2, everything went smooth. But 10 minutes ago he called and said that the phone woudn't turn on!
He says he can't get response out of it. No recovery or hard reset with nor without battery in.
Don't hope it's perma bricked and it seems weird that it suddenly wont turn on.
Any ideas/help?
Thanks a lot.
At the same time press volume up + home button + power on to enter CWM.
Is his battery charged?
Prozel said:
Hi guys,
three days ago I installed Darkyrom HD on my mates Galaxy S2, everything went smooth. But 10 minutes ago he called and said that the phone woudn't turn on!
He says he can't get response out of it. No recovery or hard reset with nor without battery in.
Don't hope it's perma bricked and it seems weird that it suddenly wont turn on.
Any ideas/help?
Thanks a lot.
Click to expand...
Click to collapse
Does it get a response if holding down the power button for 8-10 sec? This will essentially reboot the phone regardless of what state it is in. If your buddy's been hit with the "sleep of death", this will boot the phone. Though I think this is a low probability if he tried pulling battery and putting it back.
Does it get a response if plugging it into the AC adapter? On the off chance the battery is completely dead. I'd like to think he tried this, though.
Has he tried another battery? Could be the battery lost the ability to hold a charge. Not common, but not unheard of either.
Doesn't seem to help. But I've told to let it charge the night and try again.
Any particular this happens? Seems random that it suddenly wont turn on.
Prozel said:
Doesn't seem to help. But I've told to let it charge the night and try again.
Any particular this happens? Seems random that it suddenly wont turn on.
Click to expand...
Click to collapse
Any particular reason? Sure. Most often, because the user installs something or flashes something they are not supposed to, to their phone. Or dropped it in water.
ctomgee said:
Any particular reason? Sure. Most often, because the user installs something or flashes something they are not supposed to, to their phone. Or dropped it in water.
Click to expand...
Click to collapse
This is what I did:
- Flashede an insecure kernel
- Rootede and installed busybox
- Downloaded Darky's OTA
- Downloaded og installed his kernel (SuperCore)
- Bootede in CWM and installed his ROM
Prozel said:
This is what I did:
- Flashede an insecure kernel
- Rootede and installed busybox
- Downloaded Darky's OTA
- Downloaded og installed his kernel (SuperCore)
- Bootede in CWM and installed his ROM
Click to expand...
Click to collapse
I wasn't trying to say YOU installed or flashed something. Maybe he did. Can I assume the phone was working when you gave it back to him? And that it was working fine for the three days after? Or was the phone in YOUR possession until he called you today?
I haven't had phone since i installed it. But I honestly don't think i he flashed anything.
He went out to jog - phone worked (listening to music)
He came home and placed the phone on the table - Phone worked
He did some exercises and when he came back - phone all black, can't get any response
Prozel said:
I haven't had phone since i installed it. But I honestly don't think i he flashed anything.
He went out to jog - phone worked (listening to music)
He came home and placed the phone on the table - Phone worked
He did some exercises and when he came back - phone all black, can't get any response
Click to expand...
Click to collapse
You said he tried a battery pull? And no response after replacing battery?
Sure his battery is just not dead, bit odd if it had been working and suddenly this happens.
Most cases an app or something can cause the phone to restart, or freezes, usually a hard reset solves this by holding down the power button for about 10 seconds.
Or entering recovery mode, or download mode just to ensure they are working.
Make sure he can charge the battery.
If all fails you may need to try a jig.
Sent from my GT-I9100 using Tapatalk
No response afer he pulled the battery.
Prozel said:
No response afer he pulled the battery.
Click to expand...
Click to collapse
Hmm. Try a different battery. If that doesn't work, warranty time.
Sent from my GT-I9100 using XDA App
We are trying to get another battery. In the meantime I've ordered a USB Jig that hopefully will turn the beast on!
Prozel said:
We are trying to get another battery. In the meantime I've ordered a USB Jig that hopefully will turn the beast on!
Click to expand...
Click to collapse
If not you will need to reflash to stock rom as warranty void with root or custom rom ..
JTag may be your next step .
jje
try to get into download mode (vol. down, home and standby button) then you can flash a firmware
Sent from my GT-I9100 using XDA App
Judaas said:
try to get into download mode (vol. down, home and standby button) then you can flash a firmware
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
READ the post please before answering .
We are trying to get another battery. In the meantime I've ordered a USB Jig that hopefully will turn the beast on!
jje
It wasn't the battery. But we've found someone that can repair it for 25 pounds + shipping. So if the USB jig doesn't work, it's going to them!
Hi!
While doing a nandroid backup restoring my SGS2 went off suddenly.
Now is not responding to power button, not responding to 3 buttons combinations and not responding to usb JIG :crying:
Somebody can help me please??
Rom? Kernel?
How about battery level?
Sent from my GT-I9100 using Tapatalk 2
Low battery or dead battery?
Very much doubt its ROM / Kernel related.
However power/battery may be a problem, have you tried to turn it on with the power plugged into the phone or after allowing it to charge for 5 min? In fact if you plug it it to a wall charger do you get the battery charging icon?
Im suspecting a hardware issue to be honest, if a device switches off like that half way through an innocuous task its either power or a hardware problem.
al_madd said:
Rom? Kernel?
How about battery level?
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
When went off it was at 67% of battery.
Now I can't even charge the phone, when I plug the charge into the phone no battery image appears
I was on latest XXLQ5 and wanted to restore nandroid backup of KI8 while this happens.
TheBlueRaja said:
Very much doubt its ROM / Kernel related.
However power/battery may be a problem, have you tried to turn it on with the power plugged into the phone or after allowing it to charge for 5 min? In fact if you plug it it to a wall charger do you get the battery charging icon?
Im suspecting a hardware issue to be honest, if a device switches off like that half way through an innocuous task its either power or a hardware problem.
Click to expand...
Click to collapse
No battery icon when connecting the charger. And can't power on with charger connected
Try leaving it on the charger for 45 mins or 2 hour and try to power on your phone (Remove it from the charger when you try to power it on).
Sent from my GT-I9100 using xda premium
Have you tried taken the battery out for more than 30 seconds?
ephraim033 said:
Try leaving it on the charger for 45 mins or 2 hour and try to power on your phone (Remove it from the charger when you try to power it on).
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
I'm trying to charge now...
The screen is warm, but no battery charging icon.
Waza. said:
Have you tried taken the battery out for more than 30 seconds?
Click to expand...
Click to collapse
Yes, I tried to leave battery out for a while (about ten minutes) but nothing...
Have you tried taken the battery out for more than 30 seconds?
Waza. said:
Have you tried taken the battery out for more than 30 seconds?
Click to expand...
Click to collapse
Why ask the same question twice?
I had similar bsod, & following saved me.
1. Launch Odin
2. Plug ph in to PC w/o battery in it.
3. Do 3 button combo for d/l mode.
4. While still holding 3 button combo... now - insert battery (tricky but can be done)
5. If ph goes into d/l mode, flash your stock ROM now with Odin...
Saved my bacon before. Hope it works for you
Sent from Valhalla!
:mwahahaa:
King_Rat said:
I had similar bsod, & following saved me.
1. Launch Odin
2. Plug ph in to PC w/o battery in it.
3. Do 3 button combo for d/l mode.
4. While still holding 3 button combo... now - insert battery (tricky but can be done)
5. If ph goes into d/l mode, flash your stock ROM now with Odin...
Saved my bacon before. Hope it works for you
Sent from Valhalla!
:mwahahaa:
Click to expand...
Click to collapse
Thanks, but tried and nothing happens :crying:
King_Rat said:
I had similar bsod, & following saved me.
1. Launch Odin
2. Plug ph in to PC w/o battery in it.
3. Do 3 button combo for d/l mode.
4. While still holding 3 button combo... now - insert battery (tricky but can be done)
5. If ph goes into d/l mode, flash your stock ROM now with Odin...
Saved my bacon before. Hope it works for you
Sent from Valhalla!
:mwahahaa:
Click to expand...
Click to collapse
I have the same problem now but this didn't fix it. Time to find a JTAG service.
Try this http://forum.xda-developers.com/showthread.php?t=1153310
PS : I have never tries this by myself and don't know if it will works
k0rp0rate said:
Yes, I tried to leave battery out for a while (about ten minutes) but nothing...
Click to expand...
Click to collapse
Try to:
1. Leave the battery.
2. Put the JIG.
3. NOW, while the JIG is on put the battery
I had your same problem and doing this procedure it worked....
PRESS TNX BUTTON IF I HELP YOU :good:
minidou-77 said:
Try this http://forum.xda-developers.com/showthread.php?t=1153310
PS : I have never tries this by myself and don't know if it will works
Click to expand...
Click to collapse
Thanks but that thread is for Samsung Captivate... Better not to try anything for another model.
Tuqano said:
Try to:
1. Leave the battery.
2. Put the JIG.
3. NOW, while the JIG is on put the battery
I had your same problem and doing this procedure it worked....
PRESS TNX BUTTON IF I HELP YOU :good:
Click to expand...
Click to collapse
Already tried but nothing happens :crying:
k0rp0rate said:
Thanks but that thread is for Samsung Captivate... Better not to try anything for another model.
Click to expand...
Click to collapse
No its supposed to work on ALL Samsung devices, read the OP
I found this reading a French blog which is written by a SGS II owner ;-)
I got this problem. My battery gone on 0% and phone turns off normally.
After that no on.
When connected on charger it come NOKIA logo with vibrate and come windows phone logo and than shut down and repeat.
I tried all solutions over net and not helped me.
What to do?
please anyone? I dont have warranty any more....
That depends... What was the last thing you did on your phone?
Did you try unlocking the bootloader? If so, did you format the disk when prompted? Never, is anyone supposed to format it. If you chose 'Cancel' then theres hope.
I would suggest trying NSS & unlock it...
http://forum.xda-developers.com/showthread.php?t=1721355
this should help...
I was just listen music and it turn off.
Not touching phone.
Zulea said:
I was just listen music and it turn off.
Not touching phone.
Click to expand...
Click to collapse
Leave it on the charger for several hours. If the battery is completely empty it can take quite a while until it is able to be restarted.
8 hours was on charger and nothing.
When connect to charger bootlop is whole time.
Zulea said:
8 hours was on charger and nothing.
When connect to charger bootlop is whole time.
Click to expand...
Click to collapse
Did you update your phone to Tango in the past day or so?
yes few days ago.
Zulea said:
yes few days ago.
Click to expand...
Click to collapse
I had a similar problem after I updated my phone, the battery just wouldn't charge up. I was able to flash the older firmware back on to the phone and it would charge the battery but as soon as I put ANY of the tango firmware's on the phone the battery would stop charging.
http://discussions.nokia.com/t5/Nok...harging-after-Tango-update/m-p/1497166#M16895
http://discussions.nokia.com/t5/Nokia-with-Windows-Phone/Lumia-800-DEAD-CELL-0/m-p/1514892#M18381
I cant turn on phone, how will flash older firmware, any tutorial*
Zulea said:
I cant turn on phone, how will flash older firmware, any tutorial*
Click to expand...
Click to collapse
When you plug in the charger you're phone is turning on but it keeps looping through the boot sequence as the screen eats up more power than it get's. Try using a wall charger to charge your phone, once the screen come on turn it off. You should be able to put enough power about 2% which would be enough to try your phone on long enough to flash it. First try to see if you can get the phone to boot up from a wall charger.
When is wall charger it come to windows logo and turn off.
Zulea said:
When is wall charger it come to windows logo and turn off.
Click to expand...
Click to collapse
Can you turn the screen off before it gets to the Windows logo?
only turn off phone if plug off charger.
Zulea said:
I cant turn on phone, how will flash older firmware, any tutorial*
Click to expand...
Click to collapse
Unfortunatly if you can't get the phone to boot up at all then you won't be able to flash on the firmware
The only solution you have is to send it back to Nokia. I dropped my phone in and was given a new phone which now works perfectly
I dont have warranty soo I gave to local service shop....
They said some problem with battery and will tell em tomorow how much will cost.
I rooted my phone, installed siyah kernel and then installed shostock 3 on my S2 last week. I did NOT use ROM Manager if that helps.
I had no problem with it for the past week and last night, it suddenly switched off. its completely dead, the display is off, doesn't go into recovery, nor the lights turn on.
All i can feel is the top part of the phone gets hot when i try to power it on.
Did anyone else face the same issue ? Please let me know if there are any solutions to this
Did you change the charging current to higher than 650?
Phalanx7621 said:
Did you change the charging current to higher than 650?
Click to expand...
Click to collapse
no i didn't. It just happenned. The phone gets hot below the battery though..!
It would most likely be either a failed battery, or hardware failure. First try to find out if it is the battery: 1) clean the contacts on the battery and the phone 2) use a known good working battery.
Next can you get into download mode? First try the usual way, with the battery in, hold down both volume buttons, but not power and plug in USB. If that doesn't work, remove the battery and leave it out and repeat the above (usb will provide power). At this stage, you don't have to do anything with download mode, just see if it works.
Just curious, did you happens to put it under the pillow?
BeenAndroidized said:
Just curious, did you happens to put it under the pillow?
Click to expand...
Click to collapse
no, it was on a table when this happenned...
BeenAndroidized said:
Just curious, did you happens to put it under the pillow?
Click to expand...
Click to collapse
Err .. u implying that the S2 can be smothered ?
spacescreamer said:
Err .. u implying that the S2 can be smothered ?
Click to expand...
Click to collapse
With developer love.