[Q] Charger cord loose when charging? - Sprint HTC EVO 4G LTE

I don't remember this when I first got the phone but the charger seems to be barely 'seated' inside the charging port when it is plugged in. I am using the charger cable from my EVO 4G and I experience the same issue with the new (shorter) charger cable from my new EVO LTE.
I push the cable as far as it will go into the charging port and it seems to wobble from side-to-side and if I pick the phone up at the right angle the cable pulls out with ease. Not a major problem but I would have noticed this when I first got it, I've noticed this last night when I plugged it in and the cable fell out when I moved the phone a little bit. Is it possible something got worn out from use and it is now loose? Is anybody else noticing this? I first assumed my new Spigen clip-on case was to blame for it and was going to fix the issue with a Dremel first thing today when I got off work but I took the case off and it is doing the same thing naked as it was cased.

gnarlynick said:
I don't remember this when I first got the phone but the charger seems to be barely 'seated' inside the charging port when it is plugged in. I am using the charger cable from my EVO 4G and I experience the same issue with the new (shorter) charger cable from my new EVO LTE.
I push the cable as far as it will go into the charging port and it seems to wobble from side-to-side and if I pick the phone up at the right angle the cable pulls out with ease. Not a major problem but I would have noticed this when I first got it, I've noticed this last night when I plugged it in and the cable fell out when I moved the phone a little bit. Is it possible something got worn out from use and it is now loose? Is anybody else noticing this? I first assumed my new Spigen clip-on case was to blame for it and was going to fix the issue with a Dremel first thing today when I got off work but I took the case off and it is doing the same thing naked as it was cased.
Click to expand...
Click to collapse
My new cord is still very tight. Basically no movement at all in any direction.
When I use my OG evo cord, or a blackberry charger. There is a slight side to side wiggle. But still not much and definitely wouldn't fall out. Hopefully it's your cords, and not the port on the phone. But sounds like one of them has worn.

I had this problem with other phones and every time it was the cable . Try a different cable.
Sent from my EVO using XDA

Alright it was not a worn port or charger cable. It was in fact the case. I took a Dremel to it and shaved about a millimeter off the charger cut-out and everything works fine now.
Sent from my HTC EVO 4G LTE using Tapatalk

Related

Crappy charger/usb cable, use it with care

*Sigh*...
Had the same problem with the TF101... After a while the tablet suddenly wouldn't charge anymore and it turned out to be the cable which suddenly went bad.
Now again the exact same problem with the TF201. This is pretty damn annoying, will contact customer support but am wondering if someone has experience with ebay cables that do work.
Already bought this one: http://www.ebay.nl/itm/ws/eBayISAPI.dll?ViewItem&item=130678359515&ssPageName=ADME:L:OU:NL:1123
But of course that doesn't properly charge either (oh, and I still have an original cable from the TF101 which works fine, so it definitely IS the cable). The tablet responds (turns on) and charges as if connected to USB port of the pc or something but doesn't fast charge. (Pins seem fine, nothing out of the ordinary to be seen).
So also a warning, be careful with charger and cable! Like the rest of the prime it is very sensitive to malfunctioning :/ Quite disappointed that they didn't address this with the TF201 as charger and cable were an issue with TF101 as well.
do you always yank the cable directly to detach ur device from the charger? I've been using mine for a long time now, it's still as good as new and charging well.
The key is to treat the cable like cheap failure prone chunk of crap that will fail. I got a second cord for power immediately. http://www.amazon.com/dp/B007LI2QJW/ref=pe_175190_21431760_M2C_SC_dp_1
Just took one look at that thin usb cable to know it isnt built to last.
when I was a kid stuff that was "made in Taiwan" was to be avoided, ironic.
MXR2 said:
do you always yank the cable directly to detach ur device from the charger? I've been using mine for a long time now, it's still as good as new and charging well.
Click to expand...
Click to collapse
Ehm, nope... I use it with care. Never pull at the cable but just take it out at the connector itself. But I guess you should always keep it in one straight line or something.
whycali said:
The key is to treat the cable like cheap failure prone chunk of crap that will fail. I got a second cord for power immediately. http://www.amazon.com/dp/B007LI2QJW/ref=pe_175190_21431760_M2C_SC_dp_1
Just took one look at that thin usb cable to know it isnt built to last.
when I was a kid stuff that was "made in Taiwan" was to be avoided, ironic.
Click to expand...
Click to collapse
Hmmm, nice option... I think I also have a proper power adapter which simply supplies 12v all the time (where the asus one switches to 5V once fully charged). Does that matter? Being at 12v all the time?
This guy seems to have analyzed it pretty well. http://forum.xda-developers.com/showthread.php?t=1377669
dagrim1 said:
Ehm, nope... I use it with care. Never pull at the cable but just take it out at the connector itself. But I guess you should always keep it in one straight line or something.
Hmmm, nice option... I think I also have a proper power adapter which simply supplies 12v all the time (where the asus one switches to 5V once fully charged). Does that matter? Being at 12v all the time?
Click to expand...
Click to collapse
After I'm done charging, I will keep them in a storage bag. Well TBH, I do fear that it's gonna fail. Coz it looks like a damn apple charger. that weak link
Put the power brick in the freezer for 45 minutes!
It fixes it for awhile.
My cable just went bad yesterday exactly the same way.
Gladly I've had a spare one that I have bought from ebay couple months ago.
I have to get another spare one I think...
xTRICKYxx said:
Put the power brick in the freezer for 45 minutes!
It fixes it for awhile.
Click to expand...
Click to collapse
The power brick isnt the issue... The cable from the TF101 works on both chargers, the cable of the TF201 on neither. The TF101 one is also from a spare powerbrick I bought coz I originally thought the charger was the issue as well. It's just a very feeble charger and cable, again...
whycali said:
http://www.amazon.com/dp/B007LI2QJW/ref=pe_175190_21431760_M2C_SC_dp_1
Click to expand...
Click to collapse
This power connection is also a lot better fit for the dock power connector. I always felt like the one that came with my prime was going to fall out of the dock.
I have had the same issue. I bought the TF-101 for my daughter, and the first cable had the insulation sliding off near the connector after about a week. I saw that my daughter would rest the tablet on the connector at awkward angles, so I lectured her about being more careful and bought two more cables. When she went through those in a few months, I bought 5 extra cables. I know she is being more careful with them now, because they still look new when they stop charging. One of the cables I bought never worked. We are now on the last one of the batch, so I just bought 12 more.
It hasn't gone unnoticed that I am financially rewarding Asus for producing a shoddy product. We call that "the invisible hand of the market", right?

[Q] HTC amaze loose charger port?

Just picked it up today, they said its a week old. I notice if i move the phone around while its plugged in, it will light up randomly and stop charging. The cable doesn't really click in either like most other phones. Is the charger messed up or the actual charger port?
Gman91 said:
Just picked it up today, they said its a week old. I notice if i move the phone around while its plugged in, it will light up randomly and stop charging. The cable doesn't really click in either like most other phones. Is the charger messed up or the actual charger port?
Click to expand...
Click to collapse
Please post all questions in the q&a section.
What kind of charger are you using? If it's not the OEM charger that actually fits fully into the port and you're just using a regular usb cable, that will happen because it doesn't fit in securely the way the oem charger does.
Dark Nightmare said:
Please post all questions in the q&a section.
What kind of charger are you using? If it's not the OEM charger that actually fits fully into the port and you're just using a regular usb cable, that will happen because it doesn't fit in securely the way the oem charger does.
Click to expand...
Click to collapse
OEM charger, black says HTC on it. When the charger is moved upwards it loses connection. The charger port feels firm when using a toothpick to move it around. It isn't actually loose.
Charger says htc, but is the cable the correct one and second question is, is the charger the correct on for THIS device?
Dark Nightmare said:
Charger says htc, but is the cable the correct one and second question is, is the charger the correct on for THIS device?
Click to expand...
Click to collapse
I'll take a picture of it and upload it, I believe it is the correct one but I could be wrong.

			
				
Cable looks bent at the phones end, probably damaged.
Dark Nightmare said:
Cable looks bent at the phones end, probably damaged.
Click to expand...
Click to collapse
This looks bent. Where is the best place to get a replacement?
Call HTC say it shorted or ebai
Sent from my HTC Amaze
If the charger moves at the connector end then you will be able to look closely and see if the pivot point is in the joint between the black plastic and the metal "insert"... It's the charger
Or if the pivot rotation point is inside the phone...
Then it's the phone
The metal insert on my charger is super solid.. No wiggle where it meets the black plastic at all
Sent from my HTC_Amaze_4G using xda premium

HTC One X iBolt Charging Car Dock (fits w/ case)

i was shopping for a oem Car dock that would work with our phones but also fit any case i wanted to put in the dock so heres the solution im ordering mine this week
http://www.amazon.com/iBolt-Vehicle-Car-Mount-Dock/dp/B008B0WNA6
Did you get it? How did it work out?
Sent from my HTC One X+ using Tapatalk 2
I've seen this one on amazon, Kidigi usually makes good quality stuff and - as it looks - comes with the insert as well so it could be used w and w/o case
http://www.amazon.com/Car-Charger-M...2&keywords=kidigi+charging+car+dock+htc+one+x
...comparison with the price of the iBolt ...looks like the same device to me.
I've had the iBolt car dock for a few days now, and it's working fine. It's a little clunky compared to my old Atrix car dock. I don't have a case on my phone, and the clamp on the top seems to sit on top more than grab it, but the phone is snug in there.
J Cubed said:
I've had the iBolt car dock for a few days now, and it's working fine. It's a little clunky compared to my old Atrix car dock. I don't have a case on my phone, and the clamp on the top seems to sit on top more than grab it, but the phone is snug in there.
Click to expand...
Click to collapse
Have you had any charging issues with yours?
When it goes into car mode and navigation is on, it barely charges if at all.
I spoke with iBolt and they are sending me a new one. Hopefully this resolves the issue.
I am still curious if anyone else is having this issue.
TeK9samurai said:
Have you had any charging issues with yours?
When it goes into car mode and navigation is on, it barely charges if at all.
I spoke with iBolt and they are sending me a new one. Hopefully this resolves the issue.
I am still curious if anyone else is having this issue.
Click to expand...
Click to collapse
The issue isn't the charger but the USB cable not being shorted to put phone into AC charging. Pins 4&5 need to be shorted to allow this to happen. I ordered two of these http://www.amazon.com/gp/product/B007F1DV76/ref=oh_details_o03_s00_i00
to go along with this http://www.amazon.com/gp/product/B008B2EFA0/ref=oh_details_o05_s00_i00
and has allowed me to use the HOX+ for hours of navigation and still charge the phone.
For car dock I use this: http://www.slipgripcarmounts.com/SlipGrip-Vent-Holder-For-HTC-ONE-X-S720E-Using-Seidio-Surface-Case_p_130568.html
I agree that the ibolt is a little clunky but i love it. Its really sturdy. It stays in the position you locked it down at. It's easy to dock the phone with 1 hand. I havent noticed any charging issues but i'll keep an eye on that now that you mentioned it.
interesting
and to think i was going to try and mod my Atrix toys to see if i could make them work.. .this looks way easier, wonder why they dont include the proper cable in the first place or if there are any other docks similar
techcontrol said:
The issue isn't the charger but the USB cable not being shorted to put phone into AC charging. Pins 4&5 need to be shorted to allow this to happen. I ordered two of these http://www.amazon.com/gp/product/B007F1DV76/ref=oh_details_o03_s00_i00
to go along with this http://www.amazon.com/gp/product/B008B2EFA0/ref=oh_details_o05_s00_i00
and has allowed me to use the HOX+ for hours of navigation and still charge the phone.
For car dock I use this: http://www.slipgripcarmounts.com/SlipGrip-Vent-Holder-For-HTC-ONE-X-S720E-Using-Seidio-Surface-Case_p_130568.html
Click to expand...
Click to collapse
Hello,
Well it's been quite some time but I didn't wanna open a new thread for this.
I'm using the iBolt dock for my HOX for quite some time and as told above it charges really really slow.
You might say it is caused by the cable, makes sense, but the charger I use to connect the iBolt is the geniune HTC car charger, which does charge the phone pretty fast.
Also, I exit car mode when I don't need it and turn the screen off in order to charge more, but it randomly and frequently turns the phone on. Sometimes just the Android homescreen but sometimes it re-launches the car app too. I was planning to call iBolt for this but I do not have much hope for getting detailed information about the output (actually the USB pin design) since there is no information about this on the web sites.
Can anyone confirm that it supports fast (normal) charging? It becomes useless beacuse of this issue.
You can easily check for yourself. While the phone is docked in-car, do the following: Settings>Power>verify that phone reports "Charging, (AC). If phone does not say this then you are in-fact charging at 500mA. The i-dock/HTC Charger must be capable of providing enough current to charge at 1A and phone must state it's in AC charging. If this is not the case, your phone will discharge while being used in-car.
I had the same issue of non-charging when I first got my phone in December. My research led me to the solution I previously posted. I do not use car-mode since the only app I use while driving is Waze. I hope this helps.
techcontrol said:
You can easily check for yourself. While the phone is docked in-car, do the following: Settings>Power>verify that phone reports "Charging, (AC). If phone does not say this then you are in-fact charging at 500mA. The i-dock/HTC Charger must be capable of providing enough current to charge at 1A and phone must state it's in AC charging. If this is not the case, your phone will discharge while being used in-car.
I had the same issue of non-charging when I first got my phone in December. My research led me to the solution I previously posted. I do not use car-mode since the only app I use while driving is Waze. I hope this helps.
Click to expand...
Click to collapse
Late thanks =)
After writing that message it came to me too and checked it, though it was saying that it is AC charging but I can swear to anything, whether car mode or screen is on, or not, it is not charged in 1000mA mode.. When I directly charged it with the genuine charger, it was fine.
So bought a 2amp car charger, and used its cable, and it works fine now.
May be, the genuine HTC charger CABLE and the iBolt are not quite friendly with each other. I remember Nokia's not launching PC Suite when it was not a genuine Nokia cable, may be a trick like that. iBolt does not like genuine cables or genuine cable does not like oem "sockets"

[Q] Damage to Z Ultra from Magnetic Charger?

Hey, I just got my Z Ultra less than a week ago and I purchased http://www.amazon.com/gp/product/B00JEN5S6A/
I figured it would be easier to use then undoing the charging flap every time.
When I was trying the tip out without being connected to the charger I noticed the magnet was strong but didn't sit in the connector properly..
After looking at some other magnetic chargers online I saw some of them being plugged in upside down so I tried that and it sat in the port better.
When the phone was extremely low on batter (4 percent) I plugged the charger into the tip and put it on upside down. At first the phone restarted so I thought hmm thats weird and unplugged it, I then tried again and made sure it sat in the port snug and my phone turned off and wouldnt turn on again.. After about 15 minutes of the phone charging with no sign of led or charging symbol I found online to try the reset button and it finally turned on. I did some searching online and found out that the port isn't really meant for a magnetic charger but a dock and what I experienced was inverse connection.
So i am wondering if this could have possibly damaged the phone or battery in any way? I dont know if my battery life has been affected or stayed the same as it was the second day of having the phone..
Sorry for the long rant but I would appreciate any input. Thanks
You're not the first one to do a "reverse charging", and I believe that it will or can damage your device. The magnetic connector is made for the Sony DK30 dock, which costs around $30.
http://www.amazon.com/gp/aw/d/B00EC...200_QL40&qid=1404599682&sr=8-1#ref=mp_s_a_1_1
The thing with using accessories like you do, is that it's not a genuine product by Sony, so any damage done by say, a no-name charger like you're using, won't be covered by the warranty. If your Ultra catches fire in the middle of the night and you're using a " fake" charger, well tough luck. Sony won't cover that.
I would use a "fake" charger if the Ultra had a removable battery, in case it got damaged, but it doesn't, so you're really playing with fire right now.
Well to be honest I did not know the charger wasn't made for that until I experienced that. I've ordered the dk30 dock online as the sony store near me did not carry it but was wondering if I should be concerned with what already happened and get my phone swapped as it's still within return policy..?
Haze69 said:
Well to be honest I did not know the charger wasn't made for that until I experienced that. I've ordered the dk30 dock online as the sony store near me did not carry it but was wondering if I should be concerned with what already happened and get my phone swapped as it's still within return policy..?
Click to expand...
Click to collapse
i bought a aftermarket magnetic charging cable, plugged reversely and same as yours, couldnt turn on until i pressed the reset button to make the led lit when charging, waited a few hours plugged to the usb sony charger, led turned out normal. just when i thought it was fine again i noticed whenever i turned it off it turned itself on again and boot loop until i pressed the reset button to make it really off, plus, when it hit 15% battery life on the indicator on notification bar, it dropped 2% per second, yes, per second, and phone died. returned it and waiting for replacement.
see if yours has those symptoms, i think reverse charging does damage to the battery or the phone, see the shape of the tips of the charging port different, there may be a reason behind it.
edit: the reason i tried plugging the magnetic cable reversely was while i plugged it in normal direction, it showed its charging while it wasnt, thats y, and it was a cheap aftermarket one, i ended up buying a official dk30 from sony store
Mwinggg said:
i bought a aftermarket magnetic charging cable, plugged reversely and same as yours, couldnt turn on until i pressed the reset button to make the led lit when charging, waited a few hours plugged to the usb sony charger, led turned out normal. just when i thought it was fine again i noticed whenever i turned it off it turned itself on again and boot loop until i pressed the reset button to make it really off, plus, when it hit 15% battery life on the indicator on notification bar, it dropped 2% per second, yes, per second, and phone died. returned it and waiting for replacement.
see if yours has those symptoms, i think reverse charging does damage to the battery or the phone, see the shape of the tips of the charging port different, there may be a reason behind it.
edit: the reason i tried plugging the magnetic cable reversely was while i plugged it in normal direction, it showed its charging while it wasnt, thats y, and it was a cheap aftermarket one, i ended up buying a official dk30 from sony store
Click to expand...
Click to collapse
I have a Magnetic Charger - and I too experienced the shut down when I tried it upside down once.
I'm using a generic charger and haven't experienced any issues for months - just make sure to use it correctly.
This thread has me worried now though haha.
bigystyle84 said:
I have a Magnetic Charger - and I too experienced the shut down when I tried it upside down once.
I'm using a generic charger and haven't experienced any issues for months - just make sure to use it correctly.
This thread has me worried now though haha.
Click to expand...
Click to collapse
Im sure there has been one that the charger was the wrong polarity I think, and another where it was misused, that ended up with near dead batteries
I accidentally connected the charger in reverse, well the port is now dead. The phone thinks it's charging but the charger light never comes on and GSAM shows no increase in charge. At least the USB port still works.
Sent from my C6806_GPe using XDA Premium 4 mobile app
Thank you very much for the warning. After reading this thread I was thinking that Sony should have keyed the connector to only plug in one orientation. I looked at my magnetic charger and that is indeed the case. One opening is round and one is oval, so the round opening will not fit over the oval contact on the phone. I guess the issue is the quality of the magnetic charger cable - a cheap one still may allow contact. The key is that the contacts on the cable are recessed into the housing so that the housing must fit over the posts on the phone before contact is made.
why in the name of all that is holy does the connector even allow for being plugged in the wrong way???
Cheap Chineese knockoffs. JUST DON'T BUY THEM.
Sony should have just gone with induction charging but oh well. As cheap as the GPe is right now, I'll just buy another one.
Sent from my C6806_GPe using XDA Premium 4 mobile app
I just found this thread after plugging in my magnetic adapter in backwards. I have been using it for almost 6 months with no problem, and then this past Friday, I sat down at my desk and grabbed the charger and stuck it on without looking, and the phone shut off. You know the rest, now the magnetic port is done, and the screen will either keep coming back on while charging, or shut off and not come back on unless I force it off with Power + Vol + key. This sucks. I don't think I will get another Sony since it was so easy to kill it. Great big screen though, I will miss it.
ec4912 said:
I just found this thread after plugging in my magnetic adapter in backwards. I have been using it for almost 6 months with no problem, and then this past Friday, I sat down at my desk and grabbed the charger and stuck it on without looking, and the phone shut off. You know the rest, now the magnetic port is done, and the screen will either keep coming back on while charging, or shut off and not come back on unless I force it off with Power + Vol + key. This sucks. I don't think I will get another Sony since it was so easy to kill it. Great big screen though, I will miss it.
Click to expand...
Click to collapse
It wasn't a sony cable though was it? can you blame sony for a defective charger that they don't make?
Sorry about the phone by the way
blueether said:
It wasn't a sony cable though was it? can you blame sony for a defective charger that they don't make?
Sorry about the phone by the way
Click to expand...
Click to collapse
You're right, it was some cheap Chinese magnetic adapter, and true, I can't blame Sony for that. I guess I have gotten accustomed to buying any cheap microUSB cable or even headphone I can find, and using it on my phone without a second thought. I think that's why all of us who have messed up our phones with these bad magnetic adapters didn't stop to think we were putting our phone at risk. It was just another cheap accessory. I guess I have learned my lesson to be more careful what I stick into my next phone.
Be careful of where you purchase the dock as well; I purchased the DK 30 dock on eBay, and after about a month, started having problems charging. One day, it wouldn't charge on the dock at all.
Saw that the right pin in the dock has one of the plastic surrounds which broke off, which I assume is the culprit of the problem.
So off I went, this time Amazon, to order another dock, which works, using it now to charge my mobile phone.
Sent from my C6806 using XDA Free mobile app
Fire!
I almost killed my phone! Aside from upside-down, I was using an apple 2.4a charger - it burned the side out of the phone, and melted the cable right off the connector - in fact - the melting-off probably saved me - house filled with smoke etc. It did the mad re-start loop thing for about half an hour (my guess - there's a temp sensor in there which was tripping our because of the heat), but to my amazement, even with the side melted to death, the phone now still seems to work OK for me (probably not including the "waterproof" feature anymore).
Was super lucky it didn't burn the house down. What kind of idiot manufacturer doesn't put a polarity bridge on their reversable socket!?!?!?!
cndg said:
I almost killed my phone! Aside from upside-down, I was using an apple 2.4a charger - it burned the side out of the phone, and melted the cable right off the connector - in fact - the melting-off probably saved me - house filled with smoke etc. It did the mad re-start loop thing for about half an hour (my guess - there's a temp sensor in there which was tripping our because of the heat), but to my amazement, even with the side melted to death, the phone now still seems to work OK for me (probably not including the "waterproof" feature anymore).
Was super lucky it didn't burn the house down. What kind of idiot manufacturer doesn't put a polarity bridge on their reversable socket!?!?!?!
Click to expand...
Click to collapse
with an oem version the plug isn't reversible for all accounts I've read
I bought one on eBay allegedly SONY, broken in two-three weeks of use.
Brought another on Amazon, believe it is genuine, still works.
Both were the DK-30 charging dock. The broken one I use to watch YouTube.
Sent from my C6806 using XDA Free mobile app
Just to echo all of the previous posters - had the same issue as well.
My experience played out as follows:
* Got phone - over joyed since recently price reductions for such a high quality product meant approx USD290.
* Realise the flaps are a bit annoying so after 1 week; get magnetic charger. Seems to work at office
* Get another for home. After try two times; connect but not charge. connect in reverse. Phone shuts off immediately.
* PANICK - for next 30 minutes try the little red button, power switch + (combinations). Nothing helps
* eventually just plug into USB port and pray. After another 20 minutes get blinking red LED. But still doesn't boot
* another 20 minutes ago- solid LED; it boots! still at original percentage battery.
* now have strange problem - without anything plugged in; the phone can't boot properly, get repated SONY logo followed by power off and loop. CPU gets hot.
* If plug in USB - get styled battery icon; and when booting... IT WORKS.
* If close to fully charge (>90%) screen keeps on activating now when charging.
* to rub salt in the wound; the original magnetic charger at work doesn't seem to charge anymore (ie magnetic charger port dead).
Since it is a 3 week old phone, have lots of mixed feelings now. It was REALLY great purchase for the price and happy with it at first. but now I feel like I have a damaged product. feel quite upset.
I know buying cheap USB charger was the problem; but for SONY to have something so critical and vulnerable makes me wary as well. Initlally happy with phone (came from Galaxy Note camp) but now just wary of the phones.
coastalmikey said:
I accidentally connected the charger in reverse, well the port is now dead. The phone thinks it's charging but the charger light never comes on and GSAM shows no increase in charge. At least the USB port still works.
Sent from my C6806_GPe using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I am facing the same problem. My magnetic charging port is now dead ( charging led lights up but the doesn't charged the battery. battery level goes down ). I have changed the magnetic charging port, but still behaves the same. Do you think changing the charging flex will make it work ? because if the magnetic charging port is damaged from motherboard itself, then there is no point changing the flex...
Appreciate your reply.
Thanks !

Magnetic Chargers

I've been looking for a charger that attaches to the side dock on the Z2. I bought one on EBay very cheap but the charging from seems to connect then disconnect all the time. I guess that's what I get for buying a cheap unit. Is there a good one that will charge the Z2 properly? I'm sure the flap to the micro usb is going to come off sooner or later so I'd rather use the magnetic one.
I too am looking for this. What eBay one did you buy? Don't want to accidentally buy a cheap one..
Ljungan said:
I too am looking for this. What eBay one did you buy? Don't want to accidentally buy a cheap one..
Click to expand...
Click to collapse
It was one that said "black magnetic adapter charger" from the UK it was only £2.95.
I'm happy with 'kwmobile' charger bought on amazon.de, especially I like the fact that magnet is not too strong therefore I don't have a fear that magnetic port will fall out. I hope so ... :fingers-crossed:
sarobi said:
I'm happy with 'kwmobile' charger bought on amazon.de, especially I like the fact that magnet is not too strong therefore I don't have a fear that magnetic port will fall out. I hope so ... :fingers-crossed:
Click to expand...
Click to collapse
I bought a dirt cheap one from ebay too, works fine although the magnets aren't very strong so the amount of time I spend fiddling to get it to latch on I may as well use a micro usb!
http://www.amazon.com/gp/product/B00JEMESHG/ref=oh_aui_detailpage_o00_s01?ie=UTF8&psc=1
Best I've come across, a bit more expensive though.
It fits very snugly over the charging port, so if you use case this cable might not go well with it.
I just recently bought a z2, came with a knock off dock.
Doesn't anyone have a good free alarm clock app thatll stay dimly lit all night and work as a bedside clock.
Thanks
kylecummins said:
I just recently bought a z2, came with a knock off dock.
Doesn't anyone have a good free alarm clock app thatll stay dimly lit all night and work as a bedside clock.
Thanks
Click to expand...
Click to collapse
Gentle Alarm will, it isn't free, but it's worth the cost.
Goldfire said:
Gentle Alarm will, it isn't free, but it's worth the cost.
Click to expand...
Click to collapse
I've heard that, I got a free app called timely and it works great, with smart connect it automatically goes into silent + opens timely when I dock.
Word of warning with magnetic chargers, don't be stupid like me and turn the charger the other way around to see if it connects better, you will end up shorting something inside your phone and you will have to RMA your device
kylecummins said:
I just recently bought a z2, came with a knock off dock.
Doesn't anyone have a good free alarm clock app thatll stay dimly lit all night and work as a bedside clock.
Thanks
Click to expand...
Click to collapse
The aosp default works well. Also available as clock+.
Sent from my GT-I9300 using Tapatalk
http://forum.xda-developers.com/showthread.php?t=2731066
eViLSt3ve said:
Word of warning with magnetic chargers, don't be stupid like me and turn the charger the other way around to see if it connects better, you will end up shorting something inside your phone and you will have to RMA your device
Click to expand...
Click to collapse
I have a magnetic charging cable and did this drunkly one night, woke up to find the phone turned off and SUPER HOT. Like almost burning point, freaking out I quickly removed the cable and tried turning it on but it wouldn't power up.
After 2 minutes of having a mild heart-attack I used my USB charging cable and connected it once it cooled down and within a minute it powered back up and started charging. After a few minutes of doing this I booted up the phone and the battery was on 1%
Won't be doing that again haha :silly:
drknezz said:
I have a magnetic charging cable and did this drunkly one night, woke up to find the phone turned off and SUPER HOT. Like almost burning point, freaking out I quickly removed the cable and tried turning it on but it wouldn't power up.
After 2 minutes of having a mild heart-attack I used my USB charging cable and connected it once it cooled down and within a minute it powered back up and started charging. After a few minutes of doing this I booted up the phone and the battery was on 1%
Won't be doing that again haha :silly:
Click to expand...
Click to collapse
The same happened to me but after when i attempted to charge via the USB from PC or magnetic charging points the phone kept going into an odd loop of trying to charge itself and failing, i had to restore my TA and relock my phone and RMA it, will get a new one in a few days and i won't ever be doing that stupidness again
eViLSt3ve said:
Word of warning with magnetic chargers, don't be stupid like me and turn the charger the other way around to see if it connects better, you will end up shorting something inside your phone and you will have to RMA your device
Click to expand...
Click to collapse
wow...thanks for the advice...
as far as magnetic chargers I too bought the magnector x... it should be coming in the mail soon... expensive but i hope its worth it
Sent from my ASUS Transformer Pad TF700T using XDA Free mobile app
eViLSt3ve said:
Word of warning with magnetic chargers, don't be stupid like me and turn the charger the other way around to see if it connects better, you will end up shorting something inside your phone and you will have to RMA your device
Click to expand...
Click to collapse
Wait What?
You CAN put it the wrong way?
One side is clearly bigger and iirc the charger doesnt fit the wrong size!
Haldi4803 said:
Wait What?
You CAN put it the wrong way?
One side is clearly bigger and iirc the charger doesnt fit the wrong size!
Click to expand...
Click to collapse
Trust me you can
Dock clock is my second favorite bedside clock and the one that I use(my favorite is Motorola's but it only works on their stock ROMS-they probably dropped it from their newer phones/firmwares as they did with everything else they did better then everyone else).
drknezz said:
I have a magnetic charging cable and did this drunkly one night, woke up to find the phone turned off and SUPER HOT. Like almost burning point, freaking out I quickly removed the cable and tried turning it on but it wouldn't power up.
After 2 minutes of having a mild heart-attack I used my USB charging cable and connected it once it cooled down and within a minute it powered back up and started charging. After a few minutes of doing this I booted up the phone and the battery was on 1%
Won't be doing that again haha :silly:
Click to expand...
Click to collapse
Mine does that when putting it the correct way without every putting it the wrong way. It also does the start/stop charging like the OP, hopefully he doesn't have the same problem as me.
Sent from my D6503 using Xparent Red Tapatalk 2
upon close inspection, the charging pins on the magnetic charging port are different in size to prevent plugging it backwards.
for those of you who were able to plug it in backwards, is the magnetic charger a sony accessory? or aftermarket?
I bought the magnector x and holy moly does it charge fast...and the connection is solid and it snaps in place with ease...magnet very strong...only problem is it doesn't work with my roxfit gel shell case even though it has the cutout for the magnetic port...so either I stick with using my cheap Chinese made magnetic charger that doesn't always make a solid connection and charges rather slow but works with my case or buy the case-mate barely there case which is the only other case I can see that would work with the magnector x...
Sent from my ASUS Transformer Pad TF700T using XDA Free mobile app

Categories

Resources