Related
hey there, im unsure about this radio image thing, would someone tell me about it and also could someone post a link with the best image, thankyou
There's really only 2 radio versions floating around for US Arias. There's the old one that it shipped with originally, and this updated version that came with the 2.2 update:
http://forum.xda-developers.com/showthread.php?t=1007684
You can get the image from that thread and flash it from CWR (check the md5 sum first or you will brick your phone). Or, the safer way is to run the official RUU to upgrade to 2.2 (will install the above radio), then run AlphaRevX to S-OFF.
I should add that there doesn't seem to be a huge difference in call quality between the two radios, but YMMV.
+1 I've used both radio images and the newer one shows slightly better signal strength (47.63.35.21U_7.16.35.11), for me at least. The gps did lock in a little faster. If you go to menu-Settings-About phone-Software information, in the Baseband version (shows radio you're using) the older one I believe ended in a 6 and the newer does end in 11. If you use Astro File manager you can long press the zip, choose details to see the MD5 checksum. Or you can use AFV (Android file verifier), it's a free download in the market. Personally, I would say go with the newer one, not everyone will see an improvement but from what I've read most do. Verify the MD5 checksum!!!
As far as gps goes the biggest improvement I've seen is using this gps script. Instantaneous GPS Fixation CWR v1.2 US & INTERNATIONAL FINAL http://forum.xda-developers.com/showpost.php?p=11342772&postcount=1 I used the one for my region (South Mid States), there's versions for different countries also . With this script gps locks in very fast and very accurate.
You can also use GPS Status to reset and download new assistance data, it's a free download in the market, it works great to show how many satellites your gps sees and how many it's locked into. Screenshot of GPS Status taken inside house using above script.
thanks nd how do you boot into cwr im unsure of how?
madsnake53 said:
thanks nd how do you boot into cwr im unsure of how?
Click to expand...
Click to collapse
Yea I'm gonna say that if you're not sure how to boot into CWR, don't go flashing radios.
STaria said:
Yea I'm gonna say that if you're not sure how to boot into CWR, don't go flashing radios.
Click to expand...
Click to collapse
could someone please tell me??
madsnake53 said:
could someone please tell me??
Click to expand...
Click to collapse
I get the feeling you're not rooted. IF that's the case, then you don't have cm recovery. Its something you have to flash to your phone yourself.
That said, if you aren't up for rooting your phone the alternative is to run the 2.2 ruu from htc. Then again if you're not rooted then you most likely are already on 2.2 due to either when you bought your phone or an htc ota update. If that's the case you most likely already have the radio update. To check just turn off your phone and turn it in by holding volume down button and the power button simultaneously. This takes you to the bootloader screen which displays the radio version. The newer radio ends in 11. You can also get to cm recovery from this screen (if I was wrong about the root thing) by selecting recovery in the menu.
Sent from my cm7 Aria.
all good now i am rooted i have my htc aria cyanogenmod 7.0.3 with drowningchild kernel, with the 47.63.35.21U_7.16.35.11 radio image, i was just having a blonde moment nd forget what cmr stands for which i now know it stands for clockworkmod recovery, but thankyou anyways was just inquiring
issues with wifi
Hello
First of all, sorry my english
I had installed on my Gratia the version of cyanogenmod 7.2 that comes in that thread
http://forum.xda-developers.com/showthread.php?t=1430267
concretely 2/10/12 revisión
It works perfectly, but there is a little issue with wifi
When i connected to a wifi point and i exit from its range, and enter in other wifi range that i had stored in my wifi connections, phone not connect automatically to that other wifi while phone is locked. but i had to connect it mannually unlocking the phone.
In the original rom, when i was near my home, for example, phone connects automatically to my home wifi
In other hand, when i connected to a wifi and the wifi not detect activity, it disconnect from acces point, although i have put to never the sleep polytics of wifi. This problem is solved partialy because i install an app from market that make a ping every minute to a extern ip, then wifi detects activity and no sleeps.
A friend tell me that there is an update called "baseband" that update the part of android that controls radio connections, and this update can solve this problem.
I search that update in xda forums and find this thread
http://forum.xda-developers.com/showthread.php?t=1153385&highlight=baseband
but when i try to update it with clockworkmod recovery it tells me that the update is in an old version previous to android 1.5. (amend) and abort the process.
I dont know how to solve problem.
Thanks
Hopefully this isn't too hard to solve. I have an HTC Evo, and offered to root my friends Thunderbolt. I rooted it fine, everything works flawlessly, and I even flashed a ROM without an issue.
Now, here is the thing I cannot figure out. Every ROM i have installed (BAMF, Synergy, etc) has no radio when it boots up. There are two processes that stop responding (A Sync process and a DM process). There is just simply no radio at all. I can connect to wifi, and I can browse the internet that way, but it refuses to show any connection to Verizon.
Any idea as to what is causing it? Again, I am usually on my Evo, so the Thunderbolt is a little bit different territory.
Keep in mind, all the ROM's flash and boot fine. Everything on the ROM works fine, with the exception of the radio.
Thanks for your help guys.
You have to install a new radio for the gingerbread Rom. In the dev section there is a Rom and kernel list. Find the mr2 radio there. Rename it to PG05img.zip, place on root of SD card, boot into hboot (phone off, hold vol down and power. It will flash the radio. Once it reboots delete or rename that radio file so it won't try and flash it again the next time you boot into hboot. And your done.
sent from my BAMF'n thunderbolt.
Do you see any notification of data on the phone? (1x, 3g, 4g)
Did you make sure to snap the back of the battery cover on tight as it has a connection for the antenna for the battery?
Are you trying to flash the MR1 radio on a ROM that requires either MR2 or MR2.5?
All of these could cause the issue you are having.
Have you tried to reflash one of the radios in hboot? Plus with not all the roms based on the new radios and some of them are this can cause you to lose data if the rom isn't compatable with the radio. Just make sure the roms you are installing are not based on the MR2 or MR2.5 radio while you have a MR1 radio and vice versa.
I hope this helps. If not you may want to just find the original rooted stock OTA ruu and reflash it in hboot. This will wipe all your data so if you have a way to back up apps and data like mybackup pro or titanium backup.
Here is the rom and radio listing thread
http://forum.xda-developers.com/showthread.php?t=1081930
Edit: Yeah almost forgot about the battery cover having the antenna on it like Beastclaw said
Ah. Downloaded the MR2 file, renamed it and flashed it and it worked perfectly.
Thanks so much, you all are the ****.
Going back to the Evo section now.
Again, thanks for all your help. *Waves*
I can't get my 3g to work on my TB. I have thunderstick full blown, Full sense 3.0, I previously had thunderstick-ICSbread and had the same issue. (Luuuv me some TS) is it a software issue or hardware issue, please advise on a fix so I can stop *****ing.thx in advance.
sent from my damn tab..
When is the last time u changed the radio?
Sent from my HTC Mecha using XDA App
I haven't, I just swap roms
sent from my damn tab..
May want to try a newer radio. Thats what controls that stuff. Some newer roms wont play nice with older radios.
Sent from my HTC Mecha using XDA App
I'm using thunderstick/miui-icsbread. Which do you think would be a best?
sent from my damn tab..
And also is there a video tutorial for flashing radios?
sent from my damn tab..
I can't quite speak for a video tutorial for updating radios or, to be honest, speak specifically for those roms, but I've been running CM7 since it came out and upgraded to the MR4 radios recently. Works without issue.
I do recall when the gingerbread roms started showing up, after July or August or so they started requiring the MR2 or 2.5 radios for gingerbread.
Here's the link for the combined CDMA & LTE radio zip (they're two seperate codes):
http://forum.xda-developers.com/showthread.php?t=1396408
1. Download the file.
2. Put it on the root of your SD Card (the lowest level directory).
3. Name it PG105IMG.zip - ensure you're not naming it "PG105IMG.zip.zip" (2x .zips).
4. Power off the phone.
5. Boot into the bootloader (Vol Down + Power On).
6. Use the volume & power keys to select "Fastboot."
7. Let it settle for a second - it'll scan the SD Card for a number of files and find PG05IMG.zip.
8. You'll be asked if you want to install the update. Select yes.
9. WAIT. This can several minutes to update. Whatever you do, DO NOT screw with it lest your phone be bricked. Full on bricked.
10. When it's done it'll ask you to reboot. Do that, then delete the PG05IMG.zip file off the SD Card or it will always ask you to install this update every time you get into fastboot.
Good luck!
I know there's a few posts on this, but looking for advice specific to my symptoms. The problem started off with Android media process using up a lot of cpu each time the phone was powered on. It gradually got worse and started rebooting when this happened. Started off as once or twice a day. Then got worse and worse. I had been on a bell atrix ROM (2.3.6) for about a year.
Tried flashing a number of roms, and making sure to clear caches and factory reset each time. Tried numerous versions of the CWMRecovery, no good. I notice that it noly seems to restart if it tries to communicate wirelessly (wifi or 3g seemingly). If I just leave it in cwmrecovery, it stays on fine. If I leave it at the first motoblur setup screen, without entering wifi settings, it stays on fine.
So I guessed it may be related to the radio. Installed a UK radio, bell original one and a euro one to no avail
Is there anything else I can do before I give up, or is it hardware?
cruhoortwunk said:
I know there's a few posts on this, but looking for advice specific to my symptoms. The problem started off with Android media process using up a lot of cpu each time the phone was powered on. It gradually got worse and started rebooting when this happened. Started off as once or twice a day. Then got worse and worse. I had been on a bell atrix ROM (2.3.6) for about a year.
Tried flashing a number of roms, and making sure to clear caches and factory reset each time. Tried numerous versions of the CWMRecovery, no good. I notice that it noly seems to restart if it tries to communicate wirelessly (wifi or 3g seemingly). If I just leave it in cwmrecovery, it stays on fine. If I leave it at the first motoblur setup screen, without entering wifi settings, it stays on fine.
So I guessed it may be related to the radio. Installed a UK radio, bell original one and a euro one to no avail
Is there anything else I can do before I give up, or is it hardware?
Click to expand...
Click to collapse
just had a look around and came across this http://forum.xda-developers.com/showthread.php?t=1884381 . Forgetting the Jb reference it might be an idea to follow the steps and see if that helps.
If it were me, I would do a complete system wipe first (CWM>mounts and storage>format system,data,preinstall,osh) and then reinstall a rom (I would recomend CM7.2 to start). I also might be inclined to take the external sd card out as well before restarting phone and see if that helps (going down the corrupt media file route)
Good Luck!
barry_ said:
just had a look around and came across this http://forum.xda-developers.com/showthread.php?t=1884381 . Forgetting the Jb reference it might be an idea to follow the steps and see if that helps.
If it were me, I would do a complete system wipe first (CWM>mounts and storage>format system,data,preinstall,osh) and then reinstall a rom (I would recomend CM7.2 to start). I also might be inclined to take the external sd card out as well before restarting phone and see if that helps (going down the corrupt media file route)
Good Luck!
Click to expand...
Click to collapse
Thanks for this, I never spotted the mounts and storage section for formatting before. Looks to be good to get a clean wipe
Will try now
I managed to get the MROM rom on to it, and it has stayed on for about 30mins now with wifi on.
However, it doesn't boot normally, it says 'Modem did not power up, starting RSD protocol support'. I have to choose Boot Android (no BP) to get it to boot ok. What would make it fail like this?
Is there any way to make the phone always boot android by default?
Another thing to add: I can't add any APN. If I add one and save, it doesn't save.
cruhoortwunk said:
I managed to get the MROM rom on to it, and it has stayed on for about 30mins now with wifi on.
However, it doesn't boot normally, it says 'Modem did not power up, starting RSD protocol support'. I have to choose Boot Android (no BP) to get it to boot ok. What would make it fail like this?
Is there any way to make the phone always boot android by default?
Another thing to add: I can't add any APN. If I add one and save, it doesn't save.
Click to expand...
Click to collapse
I can see that i am missing a boot.img to make it boot properly. Where can I download it?
A boot image always comes with any ROM, and MROM is no exception. If you sucessfully flashed the ROM, you've flashed the boot image too, I'm not sure why you think it's missing. But if you really want to reflash it, you can always extract it from the ROM's zip file.
ravilov said:
A boot image always comes with any ROM, and MROM is no exception. If you sucessfully flashed the ROM, you've flashed the boot image too, I'm not sure why you think it's missing. But if you really want to reflash it, you can always extract it from the ROM's zip file.
Click to expand...
Click to collapse
Alright, looks like I misunderstood the function of the boot.img. Any idea as to why it would not load the OS without me prompting it to boot android with no bp?
What is the best process to follow before flashing a rom?
I was doing factory reset,clearcache and clear dalvik from CWM. And I have started doing CWM>mounts and storage>format system,data,preinstall,osh now too.
Is that sufficient to get a good clean slate to start fresh?
And what's the best way to flash the radio? I have tried moto-fastboot radio radio.img, but that seems to stop the OS from loading. I assume the radio be installed after the ROM?
Tried an older gingerbread Bell rom, and same problem. I can only get it to boot by choosing boot android(no bp).
I also can't add an APN to it. I create it, save it and it doesn't save it to the list.
Found a fix here for the APN problem on ICS, but wondering if there's an equivalent on Gingerbread?
'Settings --> More... -> Uncheck 'Enable alt OEM telephony code' and 'Enable alternate getIMSI code'. Then reboot, and now you can add your own apn. '
No idea really, sorry. Kinda seems to me for some reason it's your bootloader that's having issues, not the ROM.
Still cant get it working, can't add an APN.
Replaced the SIM, same.
Noticed that the IMEI and baseband are listed as unknown, and think it's related. So I tried flashing a few radios.
Bell radio stays on about a min, then reboots phone
UK radio reboots once OS has loaded
French radio reboots once OS has loaded
I am based in Ireland, using a phone that was originally Bell Canada. Which radio should I try flashing?
Have you tried AT&T 36p or 37p radio?
No dice. What is the standard process with the radio zip? I have been extracting to a folder, then using moto-fastboot to clear the cache, then install the radio.
Am I missing a step or 2?
Why were you extracting it? Most radios come in a flashable ZIP, which means you flash it through recovery. No extracting.
I always got an error trying to install the zip in CWM. So installed img from fastboot instead. I'll try the newer zips from CWM.
cruhoortwunk said:
I always got an error trying to install the zip in CWM. So installed img from fastboot instead. I'll try the newer zips from CWM.
Click to expand...
Click to collapse
I get error 'assert failed' ...status 7.installation aborted..'trying to install both ATT radio zips via CWM, and status 0 trying Bell radio zip
Update on this:
I got a new phone a few days ago, and had trouble adding an APN (same problem it wouldn't save). Problem was it was not reading the sim correctly. I had some sellotape on part of the card. Removed this, and I was able to add the APN no problem.
I have cleaned the contacts on the sim card reader, no luck.
I am convinced that this is the faulty part though. When I go to add an APN, it should automatically populate the MCC and MNC from the sim, but it doesn't.
Sorry to bump an old thread but...
I have left this Atrix aside for a few months,and wanted to try it once more before giving up entirely.
It reboots when I use 3g or wifi. If I leave it offline or in cwm mode, it stays on ok.
Any ideas? Is it definitely hardware? (Have tried about 4 different images)
cruhoortwunk said:
Sorry to bump an old thread but...
I have left this Atrix aside for a few months,and wanted to try it once more before giving up entirely.
It reboots when I use 3g or wifi. If I leave it offline or in cwm mode, it stays on ok.
Any ideas? Is it definitely hardware? (Have tried about 4 different images)
Click to expand...
Click to collapse
Does it reboot if you put it in Airplane mode, then connect to WIFI only?
My Atrix randomly reboots if I have the cellular radio on, but if I put it in Airplane and only use WIFI, its very stable. I tried dozens of radios and ROMs, nothing seems to help, so I've chalked it up to some flaky hardware.
Hey guys! So I moonshined and got S-OFF on my phone. I first backed up my factory ROM after I wiped all the data so I would have it to go back to in the future if needed, this was done through clockwork mod. So I first tried using the NOS M7 ROM, didn't like that as the home screen seemed too Window's 8 phone like to me. I then tried the CyanogenMod 10.1, I noticed that my phone was only getting 3G data at this point. I was using my wife's new Galaxy S4 that was getting 4G as a comparison to mine. We were traveling through town so it's not a tower based issue, as her phone showed 4G.
I then tried to switch to viperDNA1.3.1 and I had all sort of issues with it. Heck this morning it would not even show me my alarm notification when it was going off to shut the phone up. I had to power it off to silence it. It even stopped showing the notification bar on the top of the screen and I couldn't even do the drag down thing to see notifications and settings.
So today at work I downloaded RageDNA to see if an optimized stock app would work for me, no change..... I even formatted my sdcard to blank it and the did an adb push to transfer the ROM.zip back to my phone.
SO.... between each app I would launch into ClockWorkMod and 1. wipe dalvik cache. 2. format system. 3. wipe data/factory reset. 4. choose the zip from the sdcard (haha like we really have a true sdcard) and wait for the install and then launch into the phone and do the basic setup to get the ROM working.
HELP!!!! (me crying) I am afraid I did something to my phone during the flashing that jacked up the radio causing 4G to be broken. Is there something else you need to know from me to help me out, please let me know!
**********UPDATE**********
I double checked all my phones settings with a coworker who also has a DNA, but still S-ON. Everything is setup the same for settings on the APN's. I even recreated a duplicate APN that used the specified "LTE" network instead of the one that was defaulted on both of ours "unspecified". No change, even rebooted.
I also restored my CWM backup I did before making any changes to my phone via switching ROM's. The only difference is the fact that their network typeshows "LTE" where my shows "eHRPD". I am going to look into seeing how to reflash the radio to see if something got corrupt.
If it comes down to it I am going to reset my phone back to S-ON and reflash everything that I can find that I can do.
*********Resolution*********
After reflashing my radio, I did not get any 4G signal any more, I know Verizon towers were down for 4G near my work so not sure if they moved over to the towers by my home as I only live 10 minutes from work. So only after being at work for about an hour my 4G signal started on it's own without anything done by me today.
So as I was on the path to trying to take it back to stock I followed the guide that Phaded posted for getting back to S-ON http://forum.xda-developers.com/showthread.php?t=2293919. I had a few issues with that, as it turns out my phone was not showing anything about being "LOCKED" after running his first set of commands. So I pressed forward after talking with Phaded on this situation. I had even flashed from my CWM recovery back to the stock recovery (also notice when running the RUU that it flashes the recovery.) I ran the RUU and then got the 158 error then had to flash the HBOOT. After that flash the phone showed "***Tampered*** & ***LOCKED***". I then proceeded to run the RUU and it completed at that point with no issues. Then the last few DOS commands for fastboot and back to Locked and S-On. I updated back from 1.15 up through 2.06. Also doing so that made me realize you have to step from 1.15 to 2.04 and finally 2.06. So far the 4G is still working. I will keep it stock for a few days to ensure no further 4G issues then I will be moonshining again!!
Just a guess, you may have to flash the boot image. If so the directions are in the install directions for Viper
RLGL said:
Just a guess, you may have to flash the boot image. If so the directions are in the install directions for Viper
Click to expand...
Click to collapse
I just tried to restore my CWM files from prior to any ROM changes. So far I have 3G data, but I tend to get 3G more so at my house than 4G, so not sure if anything will change.
I am wondering if the SIM card could have anything to do with this issue as well.... could a ROM have written to the card and caused it to not read the 4G data, or whatever is on there.
I also see that my phone's network seems to be "eHRPD" not sure if this had anything to do with it or not.
I double checked all my phones settings with a coworker who also has a DNA, but still S-ON. Everything is setup the same for settings on the APN's. I even recreated a duplicate APN that used the specified "LTE" network instead of the one that was defaulted on both of ours "unspecified". No change, even rebooted.
I also restored my CWM backup I did before making any changes to my phone via switching ROM's. The only difference is the fact that their network typeshows "LTE" where my shows "eHRPD". I am going to look into seeing how to reflash the radio to see if something got corrupt.
If it comes down to it I am going to reset my phone back to S-ON and reflash everything that I can find that I can do.
U need a new SIM card. 99% sure that's ur problem. They r free from any Verizon store. Give it a shot before u go thru the hassle of going back to s on and stock.
Sent from my HTC6435LVW using xda premium
if you download from the play store this app (its free) https://play.google.com/store/apps/...GwsMSwxLDEwOSwibmV0LmFuZGlyYy5sdGVvbmZvZmYiXQ.. open it and scroll down what does it say under set preferred network type? that screen has more crucial settings then the normal one. if you running viper in viper tweaks its the first option under misc. If you need help ill put up a pick when i get back. someones borrowing mine cause they stepped on their phone lol.
EDIT: also if you are running viper 1.3.1 you should download ind flash after the normal rom the ota update(the one that says 1.3.1 to 1.3.3.
reaverclan said:
if you download from the play store this app (its free) https://play.google.com/store/apps/...GwsMSwxLDEwOSwibmV0LmFuZGlyYy5sdGVvbmZvZmYiXQ.. open it and scroll down what does it say under set preferred network type? that screen has more crucial settings then the normal one. if you running viper in viper tweaks its the first option under misc. If you need help ill put up a pick when i get back. someones borrowing mine cause they stepped on their phone lol.
EDIT: also if you are running viper 1.3.1 you should download ind flash after the normal rom the ota update(the one that says 1.3.1 to 1.3.3.
Click to expand...
Click to collapse
Too funny that you pointed me to that app, I just found another one LTE Settings.
So I tried your app also and they had the exact same data listed. So here's the screen shots I took from my app I pointed to. My phone will connect to 4G only and only if I choose "LTE only" if I move it to something else either by changing it through the OS settings, or changing it through this app, it goes back to getting 3G service. So at least this tells me my phone isn't broken, just some setting is F***ed up somewhere.
I have tried Global and CDMA/LTE settings with it always showing 3G.
yup that's freaking weird lol swing by a VZW store and get a free sim card since yours seems like it might be messed up what happnes if you flash something like crpalmers kernel though? your boot image might just be all screwed up. his latest version is June 24th.
reaverclan said:
yup that's freaking weird lol swing by a VZW store and get a free sim card since yours seems like it might be messed up what happnes if you flash something like crpalmers kernel though? your boot image might just be all screwed up. his latest version is June 24th.
Click to expand...
Click to collapse
Yeah weird! I just used the DNA Toolkit v1.0.5, I flashed the 2.06 radio and after it rebooted and what not, I went outside (as I have bad service inside this house) and now 4G won't even connect. Not sure if it's the towers, as the one by work went out around noon today.
So as it's a kernal and not a ROM how do I do that, just the same install from zip file in CWM? Do I need any certain ROM for it? As right now I have the factory one that I backed up with CWM when I did S-OFF. (it was a blank fresh factory reset)
chayos00 said:
Yeah weird! I just used the DNA Toolkit v1.0.5, I flashed the 2.06 radio and after it rebooted and what not, I went outside (as I have bad service inside this house) and now 4G won't even connect. Not sure if it's the towers, as the one by work went out around noon today.
So as it's a kernal and not a ROM how do I do that, just the same install from zip file in CWM? Do I need any certain ROM for it? As right now I have the factory one that I backed up with CWM when I did S-OFF. (it was a blank fresh factory reset)
Click to expand...
Click to collapse
if your using viper it supports only 2.04 as a base for its radios i believe. like I said try flashing crpalmer's one this one http://d-h.st/hu7
OH also yeah your towers by you could be experiencing maintenance try driving to somewhere else id say at least a mile away.
reaverclan said:
if your using viper it supports only 2.04 as a base for its radios i believe. like I said try flashing crpalmer's one this one http://d-h.st/hu7
OH also yeah your towers by you could be experiencing maintenance try driving to somewhere else id say at least a mile away.
Click to expand...
Click to collapse
I flashed palmer's and no change. I just texted a coworker who lives about .25 miles away to see if he's getting 4G.
Again right now I'm on the factory ROM.
chayos00 said:
I flashed palmer's and no change. I just texted a coworker who lives about .25 miles away to see if he's getting 4G.
Again right now I'm on the factory ROM.
Click to expand...
Click to collapse
does the factory restore work like your cwm one i mean?
Click on Mobile Data in your settings, and make your 'preferred' network LTE/CDMA.
I had the very same error with the stock phone, and once I switched it - I started getting 4G almost everywhere.
Amer28 said:
Click on Mobile Data in your settings, and make your 'preferred' network LTE/CDMA.
Click to expand...
Click to collapse
That doesn't work, I have tried that like 30 times with no change.
reaverclan said:
does the factory restore work like your cwm one i mean?
Click to expand...
Click to collapse
I'll try the factory restore in the ROM and see what it does. (haven't setup the rom due to the lack of 4g)
chayos00 said:
I'll try the factory restore in the ROM and see what it does. (haven't setup the rom due to the lack of 4g)
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=17145857&postcount=2 found this and it seems like your towers might be experiencing something if they dropped from pure lte to this. like some equipment has failed and it has dropped to a lower communication lvl hardware wise. EDIT: when i meant factory i meant in cwm going to restore and restoring your whole backup(snapshot) of the factory rom that you made not in the rom itself.
chayos00 said:
That doesn't work, I have tried that like 30 times with no change.
Click to expand...
Click to collapse
I don't think you would notice the change instantly. You will see in a few hours, especially if you go somewhere, you will be getting 4G - or if you restart the phone.
Further, what you can do is flash the radio.
Here's the file you need to flash: https://docs.google.com/file/d/0B9yd_oFytDSzUjRpLTZhSFEwWnc/edit
That is a Verizon radio, and it works also with other providers.
Use fastboot to flash:
Code:
fastboot flash radio radio.img
Original thread of the radio: http://forum.xda-developers.com/showthread.php?t=2236633
PS: This is the original verizon radio.
reaverclan said:
http://forum.xda-developers.com/showpost.php?p=17145857&postcount=2 found this and it seems like your towers might be experiencing something if they dropped from pure lte to this. like some equipment has failed and it has dropped to a lower communication lvl hardware wise. EDIT: when i meant factory i meant in cwm going to restore and restoring your whole backup(snapshot) of the factory rom that you made not in the rom itself.
Click to expand...
Click to collapse
When I was at work, I compared a coworkers DNA and he was getting actual LTE signal. So don't think it's that with the eHRDP thing that I keep seeing. But yeah it looks like a "cheaters way" to get their CDMA hardware to work with LTE. lol
Sorry, I feel like a tard and not really following what you are talking about with the "factory" thing. If you mean in the hboot the factory restore, it takes you to the CWM recovery to do that factory restore. Plus the ROM restore seems to almost go through CWM as well, but does it automatically. I'm going to do a full wipe and set this thing back to factory settings. As when it's broke and not working, best thing to do is start fresh.
chayos00 said:
When I was at work, I compared a coworkers DNA and he was getting actual LTE signal. So don't think it's that with the eHRDP thing that I keep seeing. But yeah it looks like a "cheaters way" to get their CDMA hardware to work with LTE. lol
Sorry, I feel like a tard and not really following what you are talking about with the "factory" thing. If you mean in the hboot the factory restore, it takes you to the CWM recovery to do that factory restore. Plus the ROM restore seems to almost go through CWM as well, but does it automatically. I'm going to do a full wipe and set this thing back to factory settings. As when it's broke and not working, best thing to do is start fresh.
Click to expand...
Click to collapse
okay if you do it from hboot it wont do anything cause now cwm will stop that from running but that is the same as running factory reset in cwm, thats not what im talking about though when you first moonshined then booted cwm after getting it, did you run a backup of your factory(stock) ROM? if so it would be in sdcard/clockworkmod/backups it also would have been about 1.5-2GB's. you could also try the radio.img amer is taking about as well, that you need to flash with adb though in fastboot as he stated.
reaverclan said:
okay if you do it from hboot it wont do anything cause now cwm will stop that from running but that is the same as running factory reset in cwm, thats not what im talking about though when you first moonshined then booted cwm after getting it, did you run a backup of your factory(stock) ROM? if so it would be in sdcard/clockworkmod/backups it also would have been about 1.5-2GB's. you could also try the radio.img amer is taking about as well, that you need to flash with adb though in fastboot as he stated.
Click to expand...
Click to collapse
After I noticed my 4G issue, I restore my CWM backup. Yes the CWM backup is what I restored and I am running from right now. It's size is 1.39GB in size.
I will do the radio flash right now.