Related
I've installed a custom ROM but these are the apps that I really need now. Can someone post them here, so I don't have to reflash again?
I have Notes.apk
Thank you! And I also need the camera. I can't do videos anymore, only photos
http://www.mediafire.com/?dh19mvmr597e8xd
thank dr norton
have any of you actually got any of these apps to work on a custom rom? I've never seen or heard of it...how...if I just put the original, signed apps in system/app and change permissions and rest, they never work.....
i used some off the stock SE when i used froyobread by stelios97
camera,timescape,trackid,and a few others i cant remember
i just deleted the app in the custom rom,and put the stock SE in, and the installed the rom
So some of this worked on Froyo? That's good to know. Though, if it doesn't work on GingerB, probably not Ice Cream S. Thanks for telling us though.
Maybe i was just lucky,but again i didnt install them or set permissions, i put them in the custom rom, maybe that why it worked,same with new market i replaced that also in the rom and put old market back
on poul-xxx sonybread 2.3.5 i replaced the custom camera with SE stock camera not the SE apk but one SE you install with xrecovery ,i got some issues with video but that i dont use,so camera it worked fine for me
Also put trackid on this rom worked fine
Hi, sorry to bother you again, bug you again, but how did you put them in the rom if not by root explorer? Whatever you did, I'll try too!
Thanks!
No problem i did it this way
1.Download the rom
2.Open it with rar, dont extract it
3.Go to system/app
4.Remove the apk you dont want
5.Then copy/move the SE apk in system/app
6.when done close it and run the rom
7. If everything goes well you should se the SE stock on the rom
but again mabye i was just lucky
This works! I've got some working and I'll try to get more.....thanks!
happy i could help you
phoneyericsson said:
This works! I've got some working and I'll try to get more.....thanks!
Click to expand...
Click to collapse
Have you got the original Timescape working on a custom rom, and if so how (please could you provide full instructions please ?) ? THANKS!
I haven't tested the Timescape at all, I never liked that one a lot!
If you go to the apps section of the forum, I've seen many threads for Timescape fans which puts it on your custom rom.
please tell me the way ...how to get four corner launcher like sony ericsson xperia mini pro for lg p500..
ankursachdeva said:
please tell me the way ...how to get four corner launcher like sony ericsson xperia mini pro for lg p500..
Click to expand...
Click to collapse
This is probably what you're looking for. I found it a while back and it works fine on my O1. I think it force closes on stock Gingerbread, though, but it seems to be OK for CM7 based ROMs. Link below:
SE_Active_launcher.apk - 825.30 KB
it works on my p500......oxygen 2.3.2 rom
but when i m going to add any thing like widget then it force close.,.,.,.,.,
tell me any solution .,,.,.,
Well, it looks like what I heard about it force closing on stock GB is true, then. I'm running neko's Ginger Snap 2.1 rom, which is CM7.2 based, and I have no problems adding widgets. Oxygen is an AOSP rom, iirc. Someone may need to port this properly to run on AOSP roms, which I'm afraid I'm not skilled enough to do.
ankursachdeva said:
it works on my p500......oxygen 2.3.2 rom
but when i m going to add any thing like widget then it force close.,.,.,.,.,
tell me any solution .,,.,.,
Click to expand...
Click to collapse
Try to install as Systemapp. Download a Root Explorer and give root access. Browse to /system/app and copy the file to that path, set permissions to rwx-rwx-rwx and reboot.
You could try giving this version a try: Xperia_Active_Launcher.apk - 724.62 KB
onepinksheep said:
Well, it looks like what I heard about it force closing on stock GB is true, then. I'm running neko's Ginger Snap 2.1 rom, which is CM7.2 based, and I have no problems adding widgets. Oxygen is an AOSP rom, iirc. Someone may need to port this properly to run on AOSP roms, which I'm afraid I'm not skilled enough to do.
Click to expand...
Click to collapse
now i flashed cm7 stable version .,.,.,.,this launcher works OK......thanx.,.,.,.
4 corner launcher apk
i have attached the apk i found it somewhere in sony xperia mini forum.i am not permitted to post the link,but here is the apk
As title says - can i install new and may be better keyboard on CM9? Someone using another one?
I see there are JB keyboards, 4.1.2 Xperia Keyboards?
Someone?
You can install any keyboard you like Just install the apk or copy over the apk & needed libs to your phone (app in /system/app and libs in the corresponding directory ) and set permissions 644 to get it working
Searching here would give you access to many different ones Reply here if you are looking for one in particular
Min3r said:
You can install any keyboard you like Just install the apk or copy over the apk & needed libs to your phone (app in /system/app and libs in the corresponding directory ) and set permissions 644 to get it working
Searching here would give you access to many different ones Reply here if you are looking for one in particular
Click to expand...
Click to collapse
Not a particular one, just to be new, amd working on CM9.
I tried one imported from Xperia for CM but when i tried flashing it was aborted.
Downloaded some JB one, may be will try it too.
Which one did you try ? Ill take a look if you like. And I suggest you try the JB 4.2 keyboard Gestures rock
Min3r said:
Which one did you try ? Ill take a look if you like. And I suggest you try the JB 4.2 keyboard Gestures rock
Click to expand...
Click to collapse
Ok mate, will try. And if you find post links buddy.
mirost1 said:
Not a particular one, just to be new, amd working on CM9.
I tried one imported from Xperia for CM but when i tried flashing it was aborted.
Downloaded some JB one, may be will try it too.
Click to expand...
Click to collapse
plz tell me which one worked... i will also do the same... any way to remove the smiley button on keyboard and to replace it by enter (during messaging )
Sent from my Xperia U using Tapatalk 2
The 4.2 Keyboard is available in Themes n Apps Section
Take alook there and you'll find it It ought to work on all roms ! and Dr.Sanket, you'll have to do alot of smali and xml editing to get that working
Help please , i have checked on Needrom.com but i cannot see the rom for the V6.....will any other roms be suitable to use on the Jiake V6 ?
justwondering said:
Help please , i have checked on Needrom.com but i cannot see the rom for the V6.....will any other roms be suitable to use on the Jiake V6 ?
Click to expand...
Click to collapse
I very stupidly did not back up the rom , before i started playing with some of the settings....in real need of the rom if possible
justwondering said:
I very stupidly did not back up the rom , before i started playing with some of the settings....in real need of the rom if possible
Click to expand...
Click to collapse
Anyone pleassssssssssssssssssssssse
justwondering said:
Help please , i have checked on Needrom.com but i cannot see the rom for the V6.....will any other roms be suitable to use on the Jiake V6 ?
Click to expand...
Click to collapse
Here try using this ROM avaialble over "http://en.miui.com/thread-29808-1-1.html" see if this helps your out !
promo87 said:
Here try using this ROM avaialble over "http://en.miui.com/thread-29808-1-1.html" see if this helps your out !
Click to expand...
Click to collapse
Hi Thank you , i cannot see my device listed there can you tell me which version of the rom would be best please , i assume i install via CWM?
justwondering said:
Hi Thank you , i cannot see my device listed there can you tell me which version of the rom would be best please , i assume i install via CWM?
Click to expand...
Click to collapse
Hi,
I didn't find any ROM on the net for your phone, but this may be a good news for you! I found a device with same SoC as your device which has MIUI ROM. Here
Here is a guide on how to port it! Try it, it may work. I think it will as porting between 2 same MTK SoC's is really easy!
Cheers!
GeekyDroid said:
Hi,
I didn't find any ROM on the net for your phone, but this may be a good news for you! I found a device with same SoC as your device which has MIUI ROM. Here
Here is a guide on how to port it! Try it, it may work. I think it will as porting between 2 same MTK SoC's is really easy!
Cheers!
Click to expand...
Click to collapse
Thank you i shall take a look , thats brilliant
justwondering said:
Thank you i shall take a look , thats brilliant
Click to expand...
Click to collapse
I was just reading how to port :-
looks like i need the official rom of my phone.....but the big problem is my rom is not working !
http://reviewonanything.blogspot.co.uk/2014/05/ultimate-guide-for-dummies-port-miui.html
justwondering said:
I was just reading how to port :-
looks like i need the official rom of my phone.....but the big problem is my rom is not working !
http://reviewonanything.blogspot.co.uk/2014/05/ultimate-guide-for-dummies-port-miui.html
Click to expand...
Click to collapse
Well, what's wrong with your stock ROM? You can dump the system and/or make a nandroid backup in any custom recovery.
GeekyDroid said:
Well, what's wrong with your stock ROM? You can dump the system and/or make a nandroid backup in any custom recovery.
Click to expand...
Click to collapse
Basically , i was running the standard rom that came with my phone , i changed to NOVA launcher , but the phones normal launcher was still running the background.....so i rooted the phone and froze the original launcher that came with the phone as it was draining the battery.........anyway , i found the phone was running a bit slow , i had installed various apps etc..........Sooooo i thought , just reset the phone .....so because i did not unfreeze the original launcher , when it came to resetting , the phone now has no launcher due to me freezing it !
It looks as if most of the rom is still there as it does load up , it checks for sim cards etc but then stops at that point , even the phone signals come up.
So do you think it is worth using CWM to still back up the rom and use for porting to MIUI Jiake V8 version ?
If so , what command in CWM do i use to make a rom for using in porting .
Thank you for your help.
justwondering said:
Basically , i was running the standard rom that came with my phone , i changed to NOVA launcher , but the phones normal launcher was still running the background.....so i rooted the phone and froze the original launcher that came with the phone as it was draining the battery.........anyway , i found the phone was running a bit slow , i had installed various apps etc..........Sooooo i thought , just reset the phone .....so because i did not unfreeze the original launcher , when it came to resetting , the phone now has no launcher due to me freezing it !
It looks as if most of the rom is still there as it does load up , it checks for sim cards etc but then stops at that point , even the phone signals come up.
So do you think it is worth using CWM to still back up the rom and use for porting to MIUI Jiake V8 version ?
If so , what command in CWM do i use to make a rom for using in porting .
Thank you for your help.
Click to expand...
Click to collapse
Have you enabled USB debugging on your phone? You can simply install apps through ADB, so you can install a launcher through ADB and/or push it to system!
GeekyDroid said:
Have you enabled USB debugging on your phone? You can simply install apps through ADB, so you can install a launcher through ADB and/or push it to system!
Click to expand...
Click to collapse
Hi , i dont think i did , like i say , the phone does not fully boot , because i disabled the original launcher .
so basically , turn phone on , JIake screen , loads , then does not make it to the launcher , it just crashes , so i cannot go into settings etc etc...
justwondering said:
Hi , i dont think i did , like i say , the phone does not fully boot , because i disabled the original launcher .
so basically , turn phone on , JIake screen , loads , then does not make it to the launcher , it just crashes , so i cannot go into settings etc etc...
Click to expand...
Click to collapse
But I think you are able to swipe down the statusbar, right? If not, then make a CWM nandroid backup, convert it into a flashable ZIP and port MIUI.
GeekyDroid said:
But I think you are able to swipe down the statusbar, right? If not, then make a CWM nandroid backup, convert it into a flashable ZIP and port MIUI.
Click to expand...
Click to collapse
In the android recovery (3e) i have the option of Apply update from ADB
i have the following other options
reboot system now
apply update from adb
apply update from sdcard
apply update from cache
wipe data factory reset
wipe cache
backup user data
restore user data
Do i simply backup user data for my rom to port to MIUI ? or is there a simple way using the ADB update ?
With the ADB for the launcher update , how would i do that and how would the system pick up on my choice of launcher ? would i need to edit some lines of code to point towards my choice ?
Thank you for your help.
GeekyDroid said:
Have you enabled USB debugging on your phone? You can simply install apps through ADB, so you can install a launcher through ADB and/or push it to system!
Click to expand...
Click to collapse
Thank you for this , i had not tried to do this , yes i can get into my settings on my phone.... i wiped all the cache etc in the rocovery mode , then rebooted the phone , i then side swiped down to get into my settings.....i set up my google account...but when i load google playstore it just seems to hang...with the loading screen....i can even launch the browser from settings via the Apps setting menu....everything is working...but still no launcher....
i'm still a bit stuck on how to side load something like Nova launcher , so i can get my phone fully funcational again
I had hoped that with been able to set up my google account etc , the google store would of worked , then i could of just downloaded a launcher !
But hey i think i am getting somewhere today with this phone
Oooooooooh wow , thank you for the side swipe idea.....i cleared the data for the googlestore via the app settings , re-ticked the agree to google terms and conditions , then downloaded nova launcher !!!! looks as if things are working a bit better again
Brilliant i have even rebooted the phone and it loads straight to NOVA launcher
Can i still unfreeze the old launcher do you think ?
I would still like to convert to MIUI though
justwondering said:
Oooooooooh wow , thank you for the side swipe idea.....i cleared the data for the googlestore via the app settings , re-ticked the agree to google terms and conditions , then downloaded nova launcher !!!! looks as if things are working a bit better again
Brilliant i have even rebooted the phone and it loads straight to NOVA launcher
Can i still unfreeze the old launcher do you think ?
I would still like to convert to MIUI though
Click to expand...
Click to collapse
Nice to hear, that you got your phone working again!
Well, I would now copy the nova launcher to system/app and give rw-r-r permissions to it, so you won'z get problems again!
GeekyDroid said:
Nice to hear, that you got your phone working again!
Well, I would now copy the nova launcher to system/app and give rw-r-r permissions to it, so you won'z get problems again!
Click to expand...
Click to collapse
Brilliant , so if i do that , even if i do a full reset will it use nova launcher as my main launcher ?
Which option in my recovery options do i use to make a rom , so i can port to MIUI ?
Thank you every so much
justwondering said:
Brilliant , so if i do that , even if i do a full reset will it use nova launcher as my main launcher ?
Which option in my recovery options do i use to make a rom , so i can port to MIUI ?
Thank you every so much
Click to expand...
Click to collapse
Yes, you can. Well, If you don't have an actual stock ROM then it's not that easy to port it. As you have to make a nandroid backup, then convert it into flashable ZIP. But you actually need to set the right mount points for your device in the updater-script. And I don't know how to find that out. So I would be statisfied with stock ROM! :angel:
Q&A for [Audio Mod] eXtremeBeats™ Any Device
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
This mod work very well but i have little problem with version 2.0. I have lg l9 ii with stock 4.1.2 jb on it, version 1.0 work with viper4android and it sound great but when i installed version 2.0 on clean rom (ofc still 4.1.2 jb) system run good without any issues or fcs but after installing viper i cant run it...! I dont know why but viper cant just run, it is in app drawer but when i click it make screen black for 3 sec and come back to app drawer wiothout any screens or something, he should ask about su permissions and install drivers but this not happen. Ofc super su and busy box are installed and work good, dont know why it happen, i tried install viper later extreme and first extreme later viper in both ways still same problem. I come back to 1.0 because viper for me is a must, maybe you people know how to fix it. Installing viper as system app dont change anything, i tried to add viper drivers on my own by copying its file from old system to lib folder and adding necessary lines in audio_effect.conf but app still cant run
I have installed ver 1.0 on my sgs 3. I am running CM 11 on KitKat 4.4.4 . I use Nova Launcher. I do not see the icon to run the EBS program. I looked in the appp drawer for it with no luck. I do see the build prop entries in my buildprop. Poweramp loads and runs fine. Can any one assist me? BTW, I did try to install ver 2 and ver 2 update. Separately of course. The fc behavior reported by others happened to me. I restored backup then installed version 1. Please advise how to locate the icon to use this program. TIA. Gary
IaKnightHawke said:
I have installed ver 1.0 on my sgs 3. I am running CM 11 on KitKat 4.4.4 . I use Nova Launcher. I do not see the icon to run the EBS program. I looked in the appp drawer for it with no luck. I do see the build prop entries in my buildprop. Poweramp loads and runs fine. Can any one assist me? BTW, I did try to install ver 2 and ver 2 update. Separately of course. The fc behavior reported by others happened to me. I restored backup then installed version 1. Please advise how to locate the icon to use this program. TIA. Gary
Click to expand...
Click to collapse
Their is no app to say anything is open. Just trust the buildprop lines.
---------- Post added at 10:59 AM ---------- Previous post was at 10:58 AM ----------
masterganja said:
This mod work very well but i have little problem with version 2.0. I have lg l9 ii with stock 4.1.2 jb on it, version 1.0 work with viper4android and it sound great but when i installed version 2.0 on clean rom (ofc still 4.1.2 jb) system run good without any issues or fcs but after installing viper i cant run it...! I dont know why but viper cant just run, it is in app drawer but when i click it make screen black for 3 sec and come back to app drawer wiothout any screens or something, he should ask about su permissions and install drivers but this not happen. Ofc super su and busy box are installed and work good, dont know why it happen, i tried install viper later extreme and first extreme later viper in both ways still same problem. I come back to 1.0 because viper for me is a must, maybe you people know how to fix it. Installing viper as system app dont change anything, i tried to add viper drivers on my own by copying its file from old system to lib folder and adding necessary lines in audio_effect.conf but app still cant run
Click to expand...
Click to collapse
Sorry, looks like it is incompatible. Keep using 1.0.
Thanks
OK Thanks for the response.
Does it work on miui?
Sent from my HM 1SW
bobinx said:
Does it work on miui?
Sent from my HM 1SW
Click to expand...
Click to collapse
Providing it's Android 4 or up, sure.
Opss, until now I found problem with my phone: even I install busybody 15 or 18, then flash this mod (v2), then I found nothing add into my system/app and system/framework, ... only string was add into my build.prop. I don't know why, but before I installed successful this mod, with full file in this zip into my system, now didn't, even I mount system in recovery before flash zip. My phone is rooted, of course. Anyone like that?
hey guys,
I've installed this mod and I have a question.
Is there any app where I can configurate settings like in viper4android? Or is this mod made of various libs and Service's running in the background without a primary app?
Sony Xperia Z Ultra 4.4.4 Stock not compatible
Flashinh this to my leads my Sony Xperia Z Ultra 4.4.4 Stock to infinite reboots. Device reboots after several seconds of booting into system
Please help me sir,
Im new to this thread. I have galaxy note 2 n7100 and i have installed ditto note 4 rom and having viper4android installed. When i flashed ExtremeBeats audio mod through recovery the phone gets started and when i try to unlock my phone by swiping on lockscreen phone get stuck and then i have to format my phone. Please help me in this situation.
taus3q said:
Please help me sir,
Im new to this thread. I have galaxy note 2 n7100 and i have installed ditto note 4 rom and having viper4android installed. When i flashed ExtremeBeats audio mod through recovery the phone gets started and when i try to unlock my phone by swiping on lockscreen phone get stuck and then i have to format my phone. Please help me in this situation.
Click to expand...
Click to collapse
More specific please... EB version? do you have custom kernel installed or just stock kernel from rom? do you mount /system before flashing EB? The best way to install EB is after flashing the new rom. You need to mount /system then flashing EB. Reboot. After that install v4a and its drivers. Reboot again. If you follow that method and found it's not working try another version of EB. If the problem still persists, seems like it come from your rom side not supporting it.
Hi!
This beats-mod seems very promissing.
I wonder if it will work on my brand new I9301 S3 Neo ???
Because I also need to root it and wonder if it worth?
Please let me know, I love hi-fi music.
Cheers!
Sent from my GT-I9301I using XDA Free mobile app
How much time it take for installing the library?
My rom already as the viper4android... Liquidsmooth 5.0.1 LG G3 how dö i install the mod? Pl help me
iGordy said:
My rom already as the viper4android... Liquidsmooth 5.0.1 LG G3 how dö i install the mod? Pl help me
Click to expand...
Click to collapse
Just flash this in your recovery, and you are done.
Download link
Pls tell where is the download link of zip file
i flashed version 2.1 on my evo 4g lte with TWRP recovery and it flashed fine, but when i rebooted and played music, it stayed the same. Was an app supposed to be installed or something? I have Viper4android installed already, but extremebeats doesnt show up anywhere...are there more steps besides flashing with recovery?
Stock Rom?
I'm new in this kind of topics. Does it work with a Stock Rom?
This mod doesn't work on my HTC One M8. Android 4.4.4 3.28.xxx.x Rooted Stock, S-on. Tried it a bunch of times with different practices, it just soft bricks the phone every time.
OP, what can you say about this? It says in your page that my device is supported but it doesn't work. Or maybe it's just me, what should I do if it is? Help please, I'm really eager to have this mod.