Related
Hello Guys,
I'm pretty new to all the Custom Rom things around here...
Yesterday I've installed the new MoDaCo 3.0 version for my hero, i had 2.3 or what so ever. I installed the rom, and then formatted my sd-card up to EXT4 via the adb tool. I'm sorry i can't remember if i first formatted or i first put on the new rom.
The thing is: in the List it says that Apps2SD is fully included in the update. I was not able to find the changes.... i tried it my self afterwards by installing the 2 files with a terminal, but the app2sd says its not working i should read the tutorial.(which i have) although it says 100mb space free now... and before the update all my progs filled up to 30mb.
So Q1: how do i install this version right?
and Q2: i still don't get any animations for my htc Clock (with the flipping pages) and i couldn't find any preferences. how do i get it to work? (and is there a prog where i can choose all my preferences, i get the feel i can't change all the things in the HTC-Preferences Dialog.
I Hope someone understands my problems ;-)
can you please state the exact error message from apps2sd?
it should work automatically on mcr. try to partition your sdcard again (btw i'd suggest ext2), then wipe and reflash mcr. that's it, the rest is taken care of. if you still think you have problems please search for it, there are numerous threads where i explained in details how you can check whether it is working or not.
as for q2: can also be covered by a search. in short: no animations any more.
thanks for the input, search actually did help me out for the clock problem ;-) (no possible on modaco hehe)
and I'll try the formatting and re-rom again, hopefully it works.
thx!
great place here
Hi all, as you can tell by the title, I am a newbie to not only this site but also to Android & Linux too!
A little bit of a bio on what I've done so far (a bit long so please bear with me!)
I've had my HTC Desire (about 6 different handsets at last count) for just over a month, and as I have problems with the standard Orange HTC software, I read up and successfully rooted my handset, since this I have had no problems with the handset what so ever, and wont ever go back to Orange based software!
Now I have read up about 'cooking' my own ROM's, and spent some time on android.modaco.com, but I dont have the spare cash to pay for the online kitchen, and with a lot of research I stumbled upon this site (great site & info by the way!!!) so I followed the post on how to set up Ubuntu in VirtualBox (until the Java error and it needing root access or something) but anyway, I then saw the post about Cygwin and how to set up the kitchen and I did 'cook' a ROM, it was bassed on Pirate Rum's Android 2.2 ROM, so I run this through and added a few extra's but when it was burnt onto my handset and it rebooted, it did not work, the screen came up as normal, but I think I left out a launcher as I couldnt get to a home screen, no problem I thought so I then downloaded the 'PB99IMG_Bravo_HTC_WWE_1.21.405.2_Radio_32.36.00.28U_4.06.00.02_2_release_126984_signed.zip' ROM from the list of sites in the post about Cygwin, and precoded to modify this to my liking, also adding the Apps2SD package, all seemed to go well until the install was complete and it just got stuck in the loop of rebooting, getting the white HTC screen with the annoying tone and rebooting again.
It was like when I first rooted my handset and didnt partition the SD card & set it up per the guide on how to partition the card (512MB EXT2, the rest FAT32) etc... but anyway, I couldnt recover the handset properly, so I had to do the rooting procedure all over again, with goldcard, then set up Apps2SD, partition SD card before I could install ROM Manager to restore my phone to fully working order!
Please can you help a noob to be able to successfully 'cook' and burn my own ROM onto my handset please, as I am really eager to complete this so I can add new skills to my repertoire
Thanks in advance for your patience, help & advice and again, sorry for the mammoth post!
TIA, Arty.
Hi Arty,
Welcome to xda-developers. It seems you've already read up alot on android. Still I would advice you to read the top sticky posts, as they contain ALOT of useful info on "cooking" and android rom.
Oh, and try to refrain from creating new topics with every question you have. I know this is your first, but I'm just making sure you're going to be a good member.
Advice needed!
Thanks for the welcome NeoS2007!
I have managed to custom a few ROMS, but these have been ROMS that others have cooked and I would like a blank canvas so to speak!
The other day I did download a stock Android 2.2 ROM, but I think it was for the N1 or something because after waiting ALL FLIPPING DAY for it to download(guess the guys site speed was really pants) I flashed it onto my Desire but it didnt work, just was stuck on the white HTC screen for about half hour before I accepted it would not work!
I have also tried to use different boot animations (how DO you make these yourself?) made by others and use that on a ROM I have been fond of, but that dont work either
Also, how is it possible to make your own backdrop wallpapers for Android to add to your cooked ROM?
In short, the topics I need help with are:
*** Where to get an un-modded Android 2.2 ROM from that works on the Desire?
*** How to make your own custom boot animations?
*** How to make & add your own wallpaper to add to your cooked ROM?
Thanks in advance for your help, time & replies, I hope I can get the answers to the questions I have asked here!
Arty.
So, everything was fine as I shut down last night after reading a few pages from a book. Tried to power up this evening and it just won't cooperate. It won't turn on unless I hold the power button down for nine seconds. It starts up "with tap n tap" screen, then the n logo shows, then the "with tap n tap" flashes and returns to black screen then shows the "with tap n tap" for a total of eight times then stays black. No rooting, totally stock, used very little, few apps, added some reader stuff, tried a barcode thing to no avail - nothing more. Please advise. Take pity on someone like your mother! Any ideas on how to fix this? Should I contact Viewsonic or Woot? (yes, it's fully charged - first thing I tried). I'm so disappointed : (
Thank you
I've seen this happen a few times with both stock and modded devices. I think it's caused by corruption in data files that are used by some of the system firmware but I'm not 100% certain of that. A data wipe could very well get you going again. Without being able to boot all the way you're options for doing that are somewhat limited. One would be to install and use ClockworkMod, a very minor and extremely common modification to the firmware. The other option that I have used successfully is a script I've written that will delete those system prefence files and clear the machines cache without modifying your firmware. Neither is terribly complicated to implement.
All that being said... it is really up to you as to how comfortable you would feel performing those options. I can say that you will find plenty of people here that will be willing to stay right with you until it's fixed and we have a very high success rate when it comes to recovering from this kind of issue. On the other hand, Woot has been very responsive to customers with problems so it's really your call.
This thread: http://forum.xda-developers.com/showthread.php?t=865245 has instructions for installing ClockworkMod. It has a lot of other information in it also but the important part would be installing CWM. It also has download links to the files. Once it is installed it is a fairly simple matter of booting the machine up while holding down the volume up key and you'll be presented with a menu of options that will include wiping data. Selecting that will clear out any apps you've downloaded and associated data along with the system data. Once done you simply reboot the machine from another menu option and you should be off and running.
My script is run very much like installing ClockworkMod but will simply do the deletion without any user intervention. When done it reboots automatically and in two or three minutes you should be back to the initial setup screen for the tablet.
All of this probably sounds a lot more difficult than it really is but I think if you take a look at that thread I listed above and do a little searching on terms like "ClockworkMod Data Wipe" you'll find there are lots of folks who have done this and plenty of help if you need it.
KJ and LynnyW,
Since he can't boot, he will either have to make a microSD with a CWM update.zip and recovery folder (with command file edited to point to SDCARD2 instead of SDCARD) and boot that into recovery with power/volume + .
Or, he will have to NVFlash the CWM by itself.
http://forum.xda-developers.com/showthread.php?t=1020747
http://forum.xda-developers.com/showthread.php?t=1030042
The two links above have most of the info.
If he can get CWM up by one method or the other, need to go to Advanced Menu and tell it to Partition (2048 and 0), Fix Permissions and Wipe Dalvik Cache -- and then return to Main Menu and Wipe Cache and Wipe/Reset Factory Data. Then reboot.
If the tablet comes up fine we're good to go. Otherwise may need to talk about a
stock rom flash.
Hope this helps.
Rev
I am running a stock system. Amazon market and a couple bird games are all that's really on it as I use it mostly to browse the web with. No flash no email, it's stock. So far I've limped through how to recover from the acore.process problem, then ended up learning how to use nvflash after what this user described happened twice so far. I am debating updating to a Dev rom if they are more stable as otherwise this is just a fragile toy that I can't take out of the house on trips.
wetzk said:
I am debating updating to a Dev rom if they are more stable as otherwise this is just a fragile toy that I can't take out of the house on trips.
Click to expand...
Click to collapse
Update. So much better it's unreal. Go with something stable like Caulkin, Vegantab, or TnT lite. Not only will you get the real Market, you'll be much happier all around. It can be much more than a fragile little toy.
butchconner said:
KJ and LynnyW,
Since he can boot, he will either have to make a microSD with a CWM update.zip and recovery folder (with command file edited to point to SDCARD2 instead of SDCARD) and boot that into recovery with power/volume + .
Or, he will have to NVFlash the CWM by itself.
http://forum.xda-developers.com/showthread.php?t=1020747
http://forum.xda-developers.com/showthread.php?t=1030042
The two links above have most of the info.
If he can get CWM up by one method or the other, need to go to Advanced Menu and tell it to Partition (2048 and 0), Fix Permissions and Wipe Dalvik Cache -- and then return to Main Menu and Wipe Cache and Wipe/Reset Factory Data. Then reboot.
If the tablet comes up fine we're good to go. Otherwise may need to talk about a
stock rom flash.
Hope this helps.
Rev
Click to expand...
Click to collapse
I think the decision needs to be made as to whether LynnyW actually wants to start mucking about before we go suggesting modifying the recovery and repartitioning the tablet. In this case I think all that's necessary is a data wipe and that can be done without starting down a path that LynnyW may not care to follow. I certainly wouldn't recommend anything as extreme as repartitioning when the question asked is whether or not a call should be made to the manufacturer and vendor.
KJ,
Take him where you want to go -- but if he can't boot up he's going to have to
get inside somehow. That's why I said I thought he would have to install CWM.
If you know some way to wipe or reset without CWM, go for it.
Rev
P. S. -- And I assume anyone that posts here wants to fix it unless that is not
possible -- and then they want us to tell them to go to VS or Woot or
whatever.
I meant no offense, Rev. She asked whether she should call woot or Viewsonic. I was just pointing that out. Not everyone is ready to jump into modding when they have the option of warranty return/replacement.
waiting for Viewsonic call
Thanks folks. I don't want to go mucking about until necessary. I guess I was hoping for an easy fix/reset. I prefer not to send the tab for repair unless replacement is necessary. Not yet willing to put my toe in water of this vast new world of acronyms I know nothing about. My brother's voice echos in my head "you know just enough to be dangerous" (re windows). I don't want to void the warranty. I called Viewsonic and had to leave my telephone number for a return call. I'm hoping they can e-mail a file which I can copy to a microSD, pop in, turn on, and resume - until I have the nerve to install something more stable. I will let you know what Viewsonic has to say. They no longer operate at the toll free number listed on the website. Directed to another number where they answer the phone "can I help you?". I wonder what service they are using for tech support.
Lynny
I have just such a file that might get you going. Posted it this morning here:
http://forum.xda-developers.com/showthread.php?t=1030915
Feel free to look that over and let me know if you have any questions. The main caveat is that it will delete any user apps that have been installed. That may include factory installed apps that are stored in the user app area. If that is a problem I can modify the script to preserve them but then we might not be clearing the problem file.
Viewsonic should hire you!
Well, I received a call from Viewsonic tech support. The moment I finished explaining what happens on the screen, the tech said "I never heard of this. Ship it back." Whoa, no attempt to troubleshoot? I asked was there not a bootable file I could be e-mailed? After rephrasing and getting nowhere, I was not happy to be told to send this to LA for an unknown amount of time at my expense. I was told I could call back later when the manager was back from lunch. This is a far cry from the claim on the Viewsonic website:
"Got a question? We have the answers right here: documentation, downloads, tech support, software updates, product warranty and registration. Get the assistance you need, when you need it – right now. Find out how we stand behind our product, all the way."
The lack of speculation regarding what the problem might be makes me feel that Viewsonic farmed this out to a fly-by-night call center and the folks there were told to have callers just send in the hardware.
Sorry, I had to rant.
KJ, Viewsonic should hire you and your xda brethren. The files to clear the data worked. Yes, it did wipe out factory and user apps, but it got the tab working in five minutes. It also gave me a little courage. I will, after all, start reading about modifying this thing. I don't want to set it all up only to have it faint on me again.
If you have any recommendations for the least-likely-to-brick-it route, please advise. I have read a number of threads but there is so much information, and although there are numerous step-by-step instructions, I have no idea what the different roms do. I don't know where to start reading and I don't want to become an annoyance here. I will do my homework before I ask too many newbie questions.
THANK YOU!
Lynny
We understand the need to rant from time to time. No problem ;-)
Glad it got you going. I do want to recommend that you do a factory reset from the system settings also just to make absolutely sure everything was cleaned properly. It's under "Security" in the System Settings.
As for modding... read, read read. Start with the "Stickied" items in the General and Developer sections. You'll find references to basic procedures and cautions but always make sure to follow the developers instructions attached to the specific ROM you choose. As for the "Least likely to brick it..." I may not be the best person to ask since I routinely run experimental ROMs. I do like the TnTLite path for its stability, reasonable speed and close association to the stock ROM. Read as much of the threads attached to each one and ask questions if you need to. That's why we're here.
hello gentlemen
i bought my viewpad 7 last week. after digging this forum i tried to root my tablet with super one click but i was unable coz it stuck in screen and happen nothing somehow i tried gingerbreak and it worked. as i am totally newbie in android os and i have no idea on programming. but the most important thing is clockwork recovery i saw couple of youtube videos and tried working but ended up with error . i dont know how to setup adb on my pc so i tried terminal emulator but no keyboard.. tried qtadb but show me '' permission denied'' now i am pulling my hair off. i have got rom manager installed on my tablet but whenever i ty to install update.zip it say signature error or somthing (i have got custom rom in my sd and renamed to update zip also i have clockwork recovery img and flash recovery) the only thing i need is a working terminal emulator as i have no idea on comand from pc.
so is there anybody who can give me a easy tutorial or make a video to demonstrate how can i get clockwork recovery installed also custom rom i would be really really greatful
hope someone saves me...
Hello & welcome, there's no need to panic but definitely - very important to be patient, set aside at least half a day or more, and, read - read - read. Take notes as you go along & do NOT rush.
If you have not gone thru this sticky, please do so - http://forum.xda-developers.com/showthread.php?t=1236990
Sticky #1 is mandatory reading to take full advantage of the Vpad7 so that you can understand the basics, describe your Vpad's hardware & build information, etc. and how to press various buttons, go back, reset & get into Recovery and Bootloader. Without knowing it, you are prone to run into problems.
First, you need to check & make sure that your CWM (which verison) is properly installed & working (and, if so) - check under the Advanced submenu to verify "Signature Verification" status.
Do you have an "older" non-ITE or "newer" ITE multi-touch screen device, which determine which custom ROM can be used? Be specific, please ...
Generally speaking, there is no need to rename a downloaded ROM's zip file to update.zip for flashing ... so I suggest that you do more reading first.
Do you have USB debugging turned on? Applications - unkown sources turned ON to allow installation of non-Market apps? A working knowledge is essential to avoid (soft) bricking your device by being able to understand the process for Flashing - start here http://forum.xda-developers.com/wiki/Flashing_Guide_-_Android
There's nothing simple & easy about all these, sorry - time & patience is a requirement to get everything working together. Look under the "Development" section for how to install ROM & the issues involved - there are just a handful of ROMs and you don't need to spend a hundred hours going thru all of them, a few hours of reading will do - a 10 minute Youtube video isn't going to do it. The best person to "save" you is you - YMMV. Regards.
thanks a million i finally made it. i used rom manager to install un official clockwork recovery and did install custom rom however i need one more final solution i was trying to get app2sd but my rom maker said it is built in inside the rom just need to creat ext3 but i guess i cant do that without comand so again is there any manual method to do that i saw an option on rom manager but it offers only 512mb partition but i want more may be 8 gb or 4gb i have 16gb sd card.. so can u help me pls...
and i yes i had usb debug on. unknown source on
big_b0sss said:
... i used rom manager to install un official clockwork recovery ... custom rom however ... app2sd ... is built in inside the rom just need to creat ext3 but ... without comand ... rom manager ... offers only 512mb partition ... may be 8 gb or 4gb i have 16gb sd card..
Click to expand...
Click to collapse
1. Rom manager - I do not use them on my Android devices but if you are comfortable with it and help simplify your tasks & learning curve, good for you. Remember to backup, backup & backup your work & save it to more than one location - those "oops" happened to all of us, sometimes (and, at the worst time - Murphy's Law 101)
2. You only need a few files in its own sub directory or folder to properly run adb and busybox, and, to run the (good old DOS) command prompt from your PC - just need to type the commands carefully. Alternatively, Terminal Emulator (with or without the shell or user interface) can be downloaded from Android Market to the Vpad7 to install & run (it's not pre-loaded) with SU enabled ... (more reading for you on how-to's)
3. Not sure if you are referring to App2SD in Market (quite a few out there) or DT's A2SD and A2SDGUI in some of the custom ROM. Vpad7's custom ROM recommend 1 MB SD ext3/partition in general (ext4 is more advanced and challenging) - there is no need, advantage or benefit in a 2GB or 4GB ext3 with a 16GB mSD card (as you are allocating/reserving unused space that you cannot dynamically changed or reassign later on as you begin to run low on "general" storage space on the card - PLUS, you will have to reformat the card & wipe/lose everything on it, until it's restored from saved backup)
FYI - I keep the last 3 to 5 CWM Backup images/files on the mSD card and it's close to 3GB in size already, not counting pix, mp3's and saved videos.
4. Older version of CWM Recovery worked best for me in repeated ROM flashing & setup to partition/format the mSD, verison 5.0.2.6 can work but the newest one posted 5.0.2.7 did NOT work for me - YMMV, of course. Refer to the one in Cleanviewpad7 V1.0 and its instructions or EU Vapd 7 V1.7b - as I'm guessing from your description that your device is a newer ITE multi-screen hardware build. KWBR V3.2 ROM works with ITE and has the newer kernel and A2SD is easy to use per installation guide - it's lean & stripped of non-essential apps.
Have patience, backup & have run !
thanx again for ur reply but i dont know why i do not get keyboard on my terminal emulator. i tried to put comand through terminal emulator but due to keyboard issue i cant i also tried dos but i have no knowledge on that. can u make a video for me or a tutorial how can i get a2sd work on my vpad 7
thanks again
big_b0sss said:
... dont know why i do not get keyboard on my terminal emulator. i tried to put comand through terminal emulator but due to keyboard issue i cant i also tried dos but i have no knowledge on that.
Click to expand...
Click to collapse
First, as I asked before, we do NOT know which ROM you are trying to use?
But, I'm going to guess - since I've flashed all of the working ITE ones here, and you are using KWBR v3.x - and, if so, please confirm or verify, yes or no.
If so, I had issues with its keyboard not showing up in terminal emulator, and there are different reasons for it - namely, including the OP developer's choice of installed KB. However, as a workaround - by running adB/busybox from Windows Vista's command prompt, I can execute instructions to re/mount, reboot, etc.
By installing a different KB & switching to it, it worked under terminal and I can run command prompts directly. There is a learning curve involved here - not something to rush, rather steps by steps - there are "stickies" in the threads and I do not want to further clutter up excellent guides already written up, 6 to 9 months plus ago - which I took time to read, follow & work with. I encourge you to do so as well.
My advice, the easiest to do, is to install & start with a different ROM - Cleanviewpad ROM is basic, simple & easy to install, virtually "bug" free and I suggest that you start with that. KB worked directly as a toggle, popping up from terminal emulator, and you can run commands from it.
Once you are comfortable & has everything working, you can optimize your A2SD and move apps from internal storage to mSD card, etc. and progress to the next level - EU Vpad 7 V1.7b ITE ROM is nice but from experience and reading the thread's posts, some "beginners" lacking knowledge & skills have trouble with it. By running a # of patches, I get it updated to the latest and it's running optimized to my personal liking - it's not entirely difficult to learn but not for someone completely new to Android OS.
Here's a link that you could've google right here in XDA - guide to ADB - bookmarked the link for you, please search for other guides, thanks
http://forum.xda-developers.com/showthread.php?t=879701
hi there thank you so much for helping me again and yes i am using kwbr rom because i have tried cleanviewpad 7 but stuck at welcome screen doesnt work anything then tried lakehouse froyo enhanced but link disabled so stuck with this rom.. i really wish i cloud post on dev section coz im kinda stuck with this post..
but hey if u dont mind and if u have froyo enhanced rom can u upload that for me or give me a working link...
sorry for bothering u but would appreciate
Still waiting for a ROM for Viewpad 7e. Anyone know of one in development? Even the stock ROM bundled with CWM would be good so that we would have the ability to do a Nandroid backup.
Sent from my SPH D700 using XDA App
Cyanogen Mod 9.4, Shadow kernel, EI22. I like my Ice Cream Sandwich!
big_b0sss said:
... using kwbr rom because i have tried cleanviewpad 7 but stuck at welcome screen doesnt work anything then tried lakehouse froyo enhanced but link disabled ... and if u have froyo enhanced rom can u upload that for me or give me a working link...
Click to expand...
Click to collapse
Are you making good progress after rooting with custom ROM, learning a bit more about using adB and terminal emulator? I searched my storage bins for what I've kept for the Vpad7 - and I have NO luck yet finding the Froyo enhanced ROM. I did uploaded the EU V1.7b ITE custom ROM to Dropbox, along with the a2sd*.zip file (just in case, you are comfortable & ready to try - after backing things up) The A2SDGUI app is available in Market, just search & download & install up once the EU V1.7 ITE ROM is up.
A2SD does NOT need to be working for the ROM to do its basic functions, just that it will soon run low on internal storage/memory and that's where A2SD come in. If you find it useful, do a CWM backup first , then use the earlier version of CWM to reformat the mSD card again (thus, wiping it clean) and setup a 1MB ext3 partition per detailed instructions. Reboot & reconnect USB, and move/restored all of your saved files/folders/settings, etc. back to the mSD drive.
Next, flash the A2SD program by DT again just to be sure from Recovery - and then Restart into Recovery. Wipe cache & dalvik and boot up again - cross your fingers and A2SD should be up & running - check it with A2SDGUI and/or Titanium Backup will display various memory/partition/storage space & usage (used/free & total)
http://dl.dropbox.com/u/64025118/EUViewpad7v1.7b-ITE.zip
http://dl.dropbox.com/u/64025118/apps2sd-2.7.5.3-dt.beta04-signed.zip
Again, I am and will be be responsible for anything if something goes wrong by using & flashing these zip files, they are unchanged or unaltered as I originally downloaded them. I'm simply posting them with the mess created by the multi-upload servers being offline, etc. as many folks are completely at a loss for what to do next. Full credits go to the OP/xda-developers for creating their masterpieces. If you are not comfortable or unsure, please do not proceed or assume the risk - the stock ROM, especially unrooted, isn't bloated by any means at all. There is NO over-clocking at this point for any ITE kernel for the Vpad7, period - none that I know of. Folks, do NOT confuse or try this with Vpad7e (which is a different device, sorry - cannot help at all)
Regards & do post with your results and share, and, if I can help further with the specifics, will be glad to do so.
about the euvpad rom
hi there i am glad that u sugested me that rom but before i try to do anything i just want to ask that which rom is better, im asking u coz u might know as u have tried diffrent rom. i am currently having no issue with kwbr rom however somtimes lag and slowness i know its bocoz vpad has only 600mgh processor so does euvpad rom faster or is there any good thing just wondering...
if euvpad rom is better i will go ahead and intall it.. so kind of waiting on ur reply
big_b0sss said:
hi there i am glad that u sugested me that rom but before i try to do anything i just want to ask that which rom is better, im asking u coz u might know as u have tried diffrent rom. i am currently having no issue with kwbr rom however somtimes lag and slowness i know its bocoz vpad has only 600mgh processor so does euvpad rom faster or is there any good thing just wondering...
if euvpad rom is better i will go ahead and intall it.. so kind of waiting on ur reply
Click to expand...
Click to collapse
Personally, I prefer and continue to use EU V1.7b for ITE, it has support for European languages as well as Asian languages. KWBR only support Euro language and the ROM is more "stripped" down with fewer apps, but it does work nicely "out of the box" with A2SD - downside being that internal memory/storage still seem to run low (once I re-install 50+ apps on my device)
For EU V1.7 - it's using an older version of Android Market, but can be easily updated if one wanted to, and, has a few more "basic" apps pre-installed including Documents To Go - and, by adding "Car Home" - I have a working 7" GPS device in the car when needed (sound volume is low, however due to those tiny stereo speakers) - I have been running it for 5+ months now, very smooth & few, if any, FC or freezes, and, Angry Birds running nicely on it, same with YouTube videos over WiFi connection (my 3G is on Edge network, so speed is SLOW and thus very choppy due to broadband speed, not CPU-related)
If you are running KWBR nicely now, do a Backup from CWM first, wipe cache/dalvik & system next - then flash the EU Rom and setup - to see whether you like it. And, if you do - follow the post's steps that I wrote up a while back and get A2SD running with the earlier verison of CWM for ext3 partition, restore/copy back all the files to the mSD card - and reboot/check for A2SD functionality, hopefully - it works without further tweaks - and I think you will like it.
If not, it's easy enough to get back into Recovery, wipe clean it first (very important to clear all traces) and RESTORE the KWBR image from the mSD, and reboot - and you can continue using it. Set aside 2 or 3 hours to do this slowly & right, and you will find the process educational & informative - and, as I always remind newbies - the rules are simple - Backup, Backup and Backup !!
Cheers & go have fun !
There are at least 5 different bootloader/root methods and topics on the first page of "Optimus L9 P760, P765, P768, P769 General"...it's a "maze" of methods.
I have some experience with rooting...I rooted my old G2x and played with several different ROMs, but I am definitely still a noob at this game. This maze of methods makes me want to run away from my son's P769, but I can't because he is out of memory space and insisting that I do something about it. I have read several threads only to learn (a couple of pages into it) that it doesn't apply to ver. 20h or that the programs to be used are deemed "suspicious".
All I want to do is give the kid more space through the use of a larger sd card (class 10). I understand that I need to root and then either keep the stock ROM and use an app like Link2sd (which is all the kid really needs because he will not take advantage of a custom ROM) or I can run a custom ROM that takes proper advantage of the sd card in the first place.
Sorry, but I need to quit reading threads that lead to nowhere or confusion and just ask: Will anybody help me make a decision as to what method to go with? I'm not concerned about it being super-simple, I just want to be sure that it works for the kid's phone (ver. 20h) and that it's safe (in terms of malware). A little clarification on the bootloader/root thing would help too: I have to unlock the bootloader first, then root? or is it the other way around? or are they done at the same time?
OK there's two ways to look at root, it is either done at the same time as flashing a new ROM(because the ROM's come with root access) or you can root it with the Chinese program on stock ROM. If you want a custom ROM it's doable but a total pain, I still haven't done it to mine because it requires a data plan and I don't have one. Its kinda like this, downgrade the os with a kmz meant for a p760, have weird mirrored issues with bootloader and os and touches, flash radio fix , wait 30 min to an hour with data and WiFi connected, pray you received an unlock token and reboot to unlocking screen. That's the process in a nutshell, here's an actual tutorial: http://forum.xda-developers.com/showthread.php?t=2584997
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
stunts513 said:
OK there's two ways to look at root, it is either done at the same time as flashing a new ROM(because the ROM's come with root access) or you can root it with the Chinese program on stock ROM. If you want a custom ROM it's doable but a total pain, I still haven't done it to mine because it requires a data plan and I don't have one. Its kinda like this, downgrade the os with a kmz meant for a p760, have weird mirrored issues with bootloader and os and touches, flash radio fix , wait 30 min to an hour with data and WiFi connected, pray you received an unlock token and reboot to unlocking screen. That's the process in a nutshell, here's an actual tutorial: http://forum.xda-developers.com/showthread.php?t=2584997
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Click to expand...
Click to collapse
OK...forget the custom ROM...he's just a kid that wants more stupid games and videos on his phone...all he needs is more space. So what you're saying is to use the "Chinese program" to root it. OK...I will find the "Chinese program", but I'll ask first: does it work on ALL versions (particularly v. 20h).
Thanks for taking your time...it's appreciated.
It should work on that version, it did on mine and I have the same version, here's a link to it: http://forum.xda-developers.com/showthread.php?t=2553547
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
stunts513 said:
It should work on that version, it did on mine and I have the same version, here's a link to it: http://forum.xda-developers.com/showthread.php?t=2553547
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Click to expand...
Click to collapse
K...but isn't that the VRoot prog with all the suspicion surrounding it? Some of the threads I have read about this prog are actually closed by the moderators "until further notice" or until it's fully investigated...do we have an "all clear" on this?
CaptNasty said:
K...but isn't that the VRoot prog with all the suspicion surrounding it? Some of the threads I have read about this prog are actually closed by the moderators "until further notice" or until it's fully investigated...do we have an "all clear" on this?
Click to expand...
Click to collapse
There's no issue with that program. People don't read directions 99% of the time, can't get it to work so they report it as being faulty. I used the same app to root my P769V20H. Only difference now is there is actually an English version, so I've heard.
You may have to enable init.d support on the stock ROM before using something like Link2SD. I currently am not having any storage issues, 32 GB sdcard, so I cannot say if Link2SD will work or not. I did notice that there was NOT an init.d folder in my system image, which is required of Link2SD in order to work correctly. You may want to look in to this thread for enabling init.d support.
I'd also advise downloading and installing the bootstrap recovery for L9 devices with a locked bootloader. It's called L9_Recovery_Installer.1.5.0.apk. Search the L9 forums for a download link. After installing, boot in to CWM and perform a backup. This will give you something to restore to just in case something goes wonky in the future.
I ended up installing and using Cydia Impactor for root, installing the bootstrap recovery that was suggested, installing and using Universal Init.d, MiniTool Partition, and Link2SD. Seems to work fine, although I'm still having a hard time grasping why the extra space provided by the new Ext2 partition on the SDcard isn't displayed in System Settings/Storage/Internal Storage.
Thanks to all
CaptNasty said:
Seems to work fine, although I'm still having a hard time grasping why the extra space provided by the new Ext2 partition on the SDcard isn't displayed in System Settings/Storage/Internal Storage.
Click to expand...
Click to collapse
It's because most stock ROMs aren't configured to search for extended partitions. You can view all partition infos with Link2SD.